net: dsa: qca8k: move qca8k_setup()

Move qca8k_setup() to be later in the file to avoid needing prototypes
for called functions.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

1 files changed, 224 insertions, 214 deletions

diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c
index c8a36ee56b75..34eb37c25ebb 100644
--- a/drivers/net/dsa/qca8k.c
+++ b/drivers/net/dsa/qca8k.c
@@ -1132,220 +1132,6 @@ qca8k_parse_port_config(struct qca8k_priv *priv)
 	return 0;
 }
 
-static int
-qca8k_setup(struct dsa_switch *ds)
-{
-	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
-	int cpu_port, ret, i;
-	u32 mask;
-
-	cpu_port = qca8k_find_cpu_port(ds);
-	if (cpu_port < 0) {
-		dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
-		return cpu_port;
-	}
-
-	/* Parse CPU port config to be later used in phy_link mac_config */
-	ret = qca8k_parse_port_config(priv);
-	if (ret)
-		return ret;
-
-	ret = qca8k_setup_mdio_bus(priv);
-	if (ret)
-		return ret;
-
-	ret = qca8k_setup_of_pws_reg(priv);
-	if (ret)
-		return ret;
-
-	ret = qca8k_setup_mac_pwr_sel(priv);
-	if (ret)
-		return ret;
-
-	/* Make sure MAC06 is disabled */
-	ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
-				QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
-	if (ret) {
-		dev_err(priv->dev, "failed disabling MAC06 exchange");
-		return ret;
-	}
-
-	/* Enable CPU Port */
-	ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
-			      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
-	if (ret) {
-		dev_err(priv->dev, "failed enabling CPU port");
-		return ret;
-	}
-
-	/* Enable MIB counters */
-	ret = qca8k_mib_init(priv);
-	if (ret)
-		dev_warn(priv->dev, "mib init failed");
-
-	/* Initial setup of all ports */
-	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-		/* Disable forwarding by default on all ports */
-		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-				QCA8K_PORT_LOOKUP_MEMBER, 0);
-		if (ret)
-			return ret;
-
-		/* Enable QCA header mode on all cpu ports */
-		if (dsa_is_cpu_port(ds, i)) {
-			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
-					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
-					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
-			if (ret) {
-				dev_err(priv->dev, "failed enabling QCA header mode");
-				return ret;
-			}
-		}
-
-		/* Disable MAC by default on all user ports */
-		if (dsa_is_user_port(ds, i))
-			qca8k_port_set_status(priv, i, 0);
-	}
-
-	/* Forward all unknown frames to CPU port for Linux processing
-	 * Notice that in multi-cpu config only one port should be set
-	 * for igmp, unknown, multicast and broadcast packet
-	 */
-	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
-			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
-	if (ret)
-		return ret;
-
-	/* Setup connection between CPU port & user ports
-	 * Configure specific switch configuration for ports
-	 */
-	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
-		/* CPU port gets connected to all user ports of the switch */
-		if (dsa_is_cpu_port(ds, i)) {
-			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
-			if (ret)
-				return ret;
-		}
-
-		/* Individual user ports get connected to CPU port only */
-		if (dsa_is_user_port(ds, i)) {
-			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
-					QCA8K_PORT_LOOKUP_MEMBER,
-					BIT(cpu_port));
-			if (ret)
-				return ret;
-
-			/* Enable ARP Auto-learning by default */
-			ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
-					      QCA8K_PORT_LOOKUP_LEARN);
-			if (ret)
-				return ret;
-
-			/* For port based vlans to work we need to set the
-			 * default egress vid
-			 */
-			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
-					QCA8K_EGREES_VLAN_PORT_MASK(i),
-					QCA8K_EGREES_VLAN_PORT(i, QCA8K_PORT_VID_DEF));
-			if (ret)
-				return ret;
-
-			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
-					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
-					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
-			if (ret)
-				return ret;
-		}
-
-		/* The port 5 of the qca8337 have some problem in flood condition. The
-		 * original legacy driver had some specific buffer and priority settings
-		 * for the different port suggested by the QCA switch team. Add this
-		 * missing settings to improve switch stability under load condition.
-		 * This problem is limited to qca8337 and other qca8k switch are not affected.
-		 */
-		if (priv->switch_id == QCA8K_ID_QCA8337) {
-			switch (i) {
-			/* The 2 CPU port and port 5 requires some different
-			 * priority than any other ports.
-			 */
-			case 0:
-			case 5:
-			case 6:
-				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
-					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
-				break;
-			default:
-				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
-					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
-					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
-			}
-			qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
-
-			mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
-			QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-			QCA8K_PORT_HOL_CTRL1_WRED_EN;
-			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
-				  QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
-				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
-				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
-				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
-				  mask);
-		}
-
-		/* Set initial MTU for every port.
-		 * We have only have a general MTU setting. So track
-		 * every port and set the max across all port.
-		 * Set per port MTU to 1500 as the MTU change function
-		 * will add the overhead and if its set to 1518 then it
-		 * will apply the overhead again and we will end up with
-		 * MTU of 1536 instead of 1518
-		 */
-		priv->port_mtu[i] = ETH_DATA_LEN;
-	}
-
-	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
-	if (priv->switch_id == QCA8K_ID_QCA8327) {
-		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
-		       QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
-		qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
-			  QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
-			  QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
-			  mask);
-	}
-
-	/* Setup our port MTUs to match power on defaults */
-	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
-	if (ret)
-		dev_warn(priv->dev, "failed setting MTU settings");
-
-	/* Flush the FDB table */
-	qca8k_fdb_flush(priv);
-
-	/* We don't have interrupts for link changes, so we need to poll */
-	ds->pcs_poll = true;
-
-	/* Set min a max ageing value supported */
-	ds->ageing_time_min = 7000;
-	ds->ageing_time_max = 458745000;
-
-	/* Set max number of LAGs supported */
-	ds->num_lag_ids = QCA8K_NUM_LAGS;
-
-	return 0;
-}
-
 static void
 qca8k_mac_config_setup_internal_delay(struct qca8k_priv *priv, int cpu_port_index,
 				      u32 reg)
@@ -2160,6 +1946,230 @@ qca8k_port_vlan_del(struct dsa_switch *ds, int port,
 	return ret;
 }
 
+static int
+qca8k_setup(struct dsa_switch *ds)
+{
+	struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv;
+	int cpu_port, ret, i;
+	u32 mask;
+
+	cpu_port = qca8k_find_cpu_port(ds);
+	if (cpu_port < 0) {
+		dev_err(priv->dev, "No cpu port configured in both cpu port0 and port6");
+		return cpu_port;
+	}
+
+	/* Parse CPU port config to be later used in phy_link mac_config */
+	ret = qca8k_parse_port_config(priv);
+	if (ret)
+		return ret;
+
+	mutex_init(&priv->reg_mutex);
+
+	/* Start by setting up the register mapping */
+	priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
+					&qca8k_regmap_config);
+	if (IS_ERR(priv->regmap))
+		dev_warn(priv->dev, "regmap initialization failed");
+
+	ret = qca8k_setup_mdio_bus(priv);
+	if (ret)
+		return ret;
+
+	ret = qca8k_setup_of_pws_reg(priv);
+	if (ret)
+		return ret;
+
+	ret = qca8k_setup_mac_pwr_sel(priv);
+	if (ret)
+		return ret;
+
+	/* Make sure MAC06 is disabled */
+	ret = regmap_clear_bits(priv->regmap, QCA8K_REG_PORT0_PAD_CTRL,
+				QCA8K_PORT0_PAD_MAC06_EXCHANGE_EN);
+	if (ret) {
+		dev_err(priv->dev, "failed disabling MAC06 exchange");
+		return ret;
+	}
+
+	/* Enable CPU Port */
+	ret = regmap_set_bits(priv->regmap, QCA8K_REG_GLOBAL_FW_CTRL0,
+			      QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN);
+	if (ret) {
+		dev_err(priv->dev, "failed enabling CPU port");
+		return ret;
+	}
+
+	/* Enable MIB counters */
+	ret = qca8k_mib_init(priv);
+	if (ret)
+		dev_warn(priv->dev, "mib init failed");
+
+	/* Initial setup of all ports */
+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+		/* Disable forwarding by default on all ports */
+		ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+				QCA8K_PORT_LOOKUP_MEMBER, 0);
+		if (ret)
+			return ret;
+
+		/* Enable QCA header mode on all cpu ports */
+		if (dsa_is_cpu_port(ds, i)) {
+			ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(i),
+					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_TX_MASK, QCA8K_PORT_HDR_CTRL_ALL) |
+					  FIELD_PREP(QCA8K_PORT_HDR_CTRL_RX_MASK, QCA8K_PORT_HDR_CTRL_ALL));
+			if (ret) {
+				dev_err(priv->dev, "failed enabling QCA header mode");
+				return ret;
+			}
+		}
+
+		/* Disable MAC by default on all user ports */
+		if (dsa_is_user_port(ds, i))
+			qca8k_port_set_status(priv, i, 0);
+	}
+
+	/* Forward all unknown frames to CPU port for Linux processing
+	 * Notice that in multi-cpu config only one port should be set
+	 * for igmp, unknown, multicast and broadcast packet
+	 */
+	ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1,
+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_MASK, BIT(cpu_port)) |
+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_BC_DP_MASK, BIT(cpu_port)) |
+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_MC_DP_MASK, BIT(cpu_port)) |
+			  FIELD_PREP(QCA8K_GLOBAL_FW_CTRL1_UC_DP_MASK, BIT(cpu_port)));
+	if (ret)
+		return ret;
+
+	/* Setup connection between CPU port & user ports
+	 * Configure specific switch configuration for ports
+	 */
+	for (i = 0; i < QCA8K_NUM_PORTS; i++) {
+		/* CPU port gets connected to all user ports of the switch */
+		if (dsa_is_cpu_port(ds, i)) {
+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+					QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds));
+			if (ret)
+				return ret;
+		}
+
+		/* Individual user ports get connected to CPU port only */
+		if (dsa_is_user_port(ds, i)) {
+			int shift = 16 * (i % 2);
+
+			ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i),
+					QCA8K_PORT_LOOKUP_MEMBER,
+					BIT(cpu_port));
+			if (ret)
+				return ret;
+
+			/* Enable ARP Auto-learning by default */
+			ret = regmap_set_bits(priv->regmap, QCA8K_PORT_LOOKUP_CTRL(i),
+					      QCA8K_PORT_LOOKUP_LEARN);
+			if (ret)
+				return ret;
+
+			/* For port based vlans to work we need to set the
+			 * default egress vid
+			 */
+			ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(i),
+					0xfff << shift,
+					QCA8K_PORT_VID_DEF << shift);
+			if (ret)
+				return ret;
+
+			ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(i),
+					  QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) |
+					  QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF));
+			if (ret)
+				return ret;
+		}
+
+		/* The port 5 of the qca8337 have some problem in flood condition. The
+		 * original legacy driver had some specific buffer and priority settings
+		 * for the different port suggested by the QCA switch team. Add this
+		 * missing settings to improve switch stability under load condition.
+		 * This problem is limited to qca8337 and other qca8k switch are not affected.
+		 */
+		if (priv->switch_id == QCA8K_ID_QCA8337) {
+			switch (i) {
+			/* The 2 CPU port and port 5 requires some different
+			 * priority than any other ports.
+			 */
+			case 0:
+			case 5:
+			case 6:
+				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x4) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x4) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI4(0x6) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI5(0x8) |
+					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x1e);
+				break;
+			default:
+				mask = QCA8K_PORT_HOL_CTRL0_EG_PRI0(0x3) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI1(0x4) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI2(0x6) |
+					QCA8K_PORT_HOL_CTRL0_EG_PRI3(0x8) |
+					QCA8K_PORT_HOL_CTRL0_EG_PORT(0x19);
+			}
+			qca8k_write(priv, QCA8K_REG_PORT_HOL_CTRL0(i), mask);
+
+			mask = QCA8K_PORT_HOL_CTRL1_ING(0x6) |
+			QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+			QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+			QCA8K_PORT_HOL_CTRL1_WRED_EN;
+			qca8k_rmw(priv, QCA8K_REG_PORT_HOL_CTRL1(i),
+				  QCA8K_PORT_HOL_CTRL1_ING_BUF_MASK |
+				  QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN |
+				  QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN |
+				  QCA8K_PORT_HOL_CTRL1_WRED_EN,
+				  mask);
+		}
+
+		/* Set initial MTU for every port.
+		 * We have only have a general MTU setting. So track
+		 * every port and set the max across all port.
+		 * Set per port MTU to 1500 as the MTU change function
+		 * will add the overhead and if its set to 1518 then it
+		 * will apply the overhead again and we will end up with
+		 * MTU of 1536 instead of 1518
+		 */
+		priv->port_mtu[i] = ETH_DATA_LEN;
+	}
+
+	/* Special GLOBAL_FC_THRESH value are needed for ar8327 switch */
+	if (priv->switch_id == QCA8K_ID_QCA8327) {
+		mask = QCA8K_GLOBAL_FC_GOL_XON_THRES(288) |
+		       QCA8K_GLOBAL_FC_GOL_XOFF_THRES(496);
+		qca8k_rmw(priv, QCA8K_REG_GLOBAL_FC_THRESH,
+			  QCA8K_GLOBAL_FC_GOL_XON_THRES_MASK |
+			  QCA8K_GLOBAL_FC_GOL_XOFF_THRES_MASK,
+			  mask);
+	}
+
+	/* Setup our port MTUs to match power on defaults */
+	ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN);
+	if (ret)
+		dev_warn(priv->dev, "failed setting MTU settings");
+
+	/* Flush the FDB table */
+	qca8k_fdb_flush(priv);
+
+	/* We don't have interrupts for link changes, so we need to poll */
+	ds->pcs_poll = true;
+
+	/* Set min a max ageing value supported */
+	ds->ageing_time_min = 7000;
+	ds->ageing_time_max = 458745000;
+
+	/* Set max number of LAGs supported */
+	ds->num_lag_ids = QCA8K_NUM_LAGS;
+
+	return 0;
+}
+
 static u32 qca8k_get_phy_flags(struct dsa_switch *ds, int port)
 {
 	struct qca8k_priv *priv = ds->priv;