PCI: Collect all native drivers under drivers/pci/controller/

Native PCI drivers for root complex devices were originally all in
drivers/pci/host/.  Some of these devices can also be operated in endpoint
mode.  Drivers for endpoint mode didn't seem to fit in the "host"
directory, so we put both the root complex and endpoint drivers in
per-device directories, e.g., drivers/pci/dwc/, drivers/pci/cadence/, etc.

These per-device directories contain trivial Kconfig and Makefiles and
clutter drivers/pci/.  Make a new drivers/pci/controllers/ directory and
collect all the device-specific drivers there.

No functional change intended.

Link: https://lkml.kernel.org/r/1520304202-232891-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

1 files changed, 0 insertions, 394 deletions

diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
deleted file mode 100644
index 778c4f76a884..000000000000
--- a/drivers/pci/dwc/pcie-designware.c
+++ /dev/null
@@ -1,394 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Synopsys DesignWare PCIe host controller driver
- *
- * Copyright (C) 2013 Samsung Electronics Co., Ltd.
- *		http://www.samsung.com
- *
- * Author: Jingoo Han <jg1.han@samsung.com>
- */
-
-#include <linux/delay.h>
-#include <linux/of.h>
-#include <linux/types.h>
-
-#include "pcie-designware.h"
-
-/* PCIe Port Logic registers */
-#define PLR_OFFSET			0x700
-#define PCIE_PHY_DEBUG_R1		(PLR_OFFSET + 0x2c)
-#define PCIE_PHY_DEBUG_R1_LINK_UP	(0x1 << 4)
-#define PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING	(0x1 << 29)
-
-int dw_pcie_read(void __iomem *addr, int size, u32 *val)
-{
-	if ((uintptr_t)addr & (size - 1)) {
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	if (size == 4) {
-		*val = readl(addr);
-	} else if (size == 2) {
-		*val = readw(addr);
-	} else if (size == 1) {
-		*val = readb(addr);
-	} else {
-		*val = 0;
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-	}
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-int dw_pcie_write(void __iomem *addr, int size, u32 val)
-{
-	if ((uintptr_t)addr & (size - 1))
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	if (size == 4)
-		writel(val, addr);
-	else if (size == 2)
-		writew(val, addr);
-	else if (size == 1)
-		writeb(val, addr);
-	else
-		return PCIBIOS_BAD_REGISTER_NUMBER;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-u32 __dw_pcie_read_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-		       size_t size)
-{
-	int ret;
-	u32 val;
-
-	if (pci->ops->read_dbi)
-		return pci->ops->read_dbi(pci, base, reg, size);
-
-	ret = dw_pcie_read(base + reg, size, &val);
-	if (ret)
-		dev_err(pci->dev, "Read DBI address failed\n");
-
-	return val;
-}
-
-void __dw_pcie_write_dbi(struct dw_pcie *pci, void __iomem *base, u32 reg,
-			 size_t size, u32 val)
-{
-	int ret;
-
-	if (pci->ops->write_dbi) {
-		pci->ops->write_dbi(pci, base, reg, size, val);
-		return;
-	}
-
-	ret = dw_pcie_write(base + reg, size, val);
-	if (ret)
-		dev_err(pci->dev, "Write DBI address failed\n");
-}
-
-static u32 dw_pcie_readl_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg)
-{
-	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
-
-	return dw_pcie_readl_dbi(pci, offset + reg);
-}
-
-static void dw_pcie_writel_ob_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				     u32 val)
-{
-	u32 offset = PCIE_GET_ATU_OUTB_UNR_REG_OFFSET(index);
-
-	dw_pcie_writel_dbi(pci, offset + reg, val);
-}
-
-static void dw_pcie_prog_outbound_atu_unroll(struct dw_pcie *pci, int index,
-					     int type, u64 cpu_addr,
-					     u64 pci_addr, u32 size)
-{
-	u32 retries, val;
-
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
-				 lower_32_bits(cpu_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_BASE,
-				 upper_32_bits(cpu_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LIMIT,
-				 lower_32_bits(cpu_addr + size - 1));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				 lower_32_bits(pci_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				 upper_32_bits(pci_addr));
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1,
-				 type);
-	dw_pcie_writel_ob_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				 PCIE_ATU_ENABLE);
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_ob_unroll(pci, index,
-					      PCIE_ATU_UNR_REGION_CTRL2);
-		if (val & PCIE_ATU_ENABLE)
-			return;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
-}
-
-void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
-			       u64 cpu_addr, u64 pci_addr, u32 size)
-{
-	u32 retries, val;
-
-	if (pci->ops->cpu_addr_fixup)
-		cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
-
-	if (pci->iatu_unroll_enabled) {
-		dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
-						 pci_addr, size);
-		return;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT,
-			   PCIE_ATU_REGION_OUTBOUND | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_BASE,
-			   lower_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_BASE,
-			   upper_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LIMIT,
-			   lower_32_bits(cpu_addr + size - 1));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET,
-			   lower_32_bits(pci_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET,
-			   upper_32_bits(pci_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE);
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-		if (val & PCIE_ATU_ENABLE)
-			return;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "Outbound iATU is not being enabled\n");
-}
-
-static u32 dw_pcie_readl_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg)
-{
-	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
-
-	return dw_pcie_readl_dbi(pci, offset + reg);
-}
-
-static void dw_pcie_writel_ib_unroll(struct dw_pcie *pci, u32 index, u32 reg,
-				     u32 val)
-{
-	u32 offset = PCIE_GET_ATU_INB_UNR_REG_OFFSET(index);
-
-	dw_pcie_writel_dbi(pci, offset + reg, val);
-}
-
-static int dw_pcie_prog_inbound_atu_unroll(struct dw_pcie *pci, int index,
-					   int bar, u64 cpu_addr,
-					   enum dw_pcie_as_type as_type)
-{
-	int type;
-	u32 retries, val;
-
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_LOWER_TARGET,
-				 lower_32_bits(cpu_addr));
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_UPPER_TARGET,
-				 upper_32_bits(cpu_addr));
-
-	switch (as_type) {
-	case DW_PCIE_AS_MEM:
-		type = PCIE_ATU_TYPE_MEM;
-		break;
-	case DW_PCIE_AS_IO:
-		type = PCIE_ATU_TYPE_IO;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL1, type);
-	dw_pcie_writel_ib_unroll(pci, index, PCIE_ATU_UNR_REGION_CTRL2,
-				 PCIE_ATU_ENABLE |
-				 PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_ib_unroll(pci, index,
-					      PCIE_ATU_UNR_REGION_CTRL2);
-		if (val & PCIE_ATU_ENABLE)
-			return 0;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
-
-	return -EBUSY;
-}
-
-int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
-			     u64 cpu_addr, enum dw_pcie_as_type as_type)
-{
-	int type;
-	u32 retries, val;
-
-	if (pci->iatu_unroll_enabled)
-		return dw_pcie_prog_inbound_atu_unroll(pci, index, bar,
-						       cpu_addr, as_type);
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, PCIE_ATU_REGION_INBOUND |
-			   index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_LOWER_TARGET, lower_32_bits(cpu_addr));
-	dw_pcie_writel_dbi(pci, PCIE_ATU_UPPER_TARGET, upper_32_bits(cpu_addr));
-
-	switch (as_type) {
-	case DW_PCIE_AS_MEM:
-		type = PCIE_ATU_TYPE_MEM;
-		break;
-	case DW_PCIE_AS_IO:
-		type = PCIE_ATU_TYPE_IO;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR1, type);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, PCIE_ATU_ENABLE
-			   | PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
-
-	/*
-	 * Make sure ATU enable takes effect before any subsequent config
-	 * and I/O accesses.
-	 */
-	for (retries = 0; retries < LINK_WAIT_MAX_IATU_RETRIES; retries++) {
-		val = dw_pcie_readl_dbi(pci, PCIE_ATU_CR2);
-		if (val & PCIE_ATU_ENABLE)
-			return 0;
-
-		usleep_range(LINK_WAIT_IATU_MIN, LINK_WAIT_IATU_MAX);
-	}
-	dev_err(pci->dev, "Inbound iATU is not being enabled\n");
-
-	return -EBUSY;
-}
-
-void dw_pcie_disable_atu(struct dw_pcie *pci, int index,
-			 enum dw_pcie_region_type type)
-{
-	int region;
-
-	switch (type) {
-	case DW_PCIE_REGION_INBOUND:
-		region = PCIE_ATU_REGION_INBOUND;
-		break;
-	case DW_PCIE_REGION_OUTBOUND:
-		region = PCIE_ATU_REGION_OUTBOUND;
-		break;
-	default:
-		return;
-	}
-
-	dw_pcie_writel_dbi(pci, PCIE_ATU_VIEWPORT, region | index);
-	dw_pcie_writel_dbi(pci, PCIE_ATU_CR2, ~PCIE_ATU_ENABLE);
-}
-
-int dw_pcie_wait_for_link(struct dw_pcie *pci)
-{
-	int retries;
-
-	/* Check if the link is up or not */
-	for (retries = 0; retries < LINK_WAIT_MAX_RETRIES; retries++) {
-		if (dw_pcie_link_up(pci)) {
-			dev_info(pci->dev, "Link up\n");
-			return 0;
-		}
-		usleep_range(LINK_WAIT_USLEEP_MIN, LINK_WAIT_USLEEP_MAX);
-	}
-
-	dev_err(pci->dev, "Phy link never came up\n");
-
-	return -ETIMEDOUT;
-}
-
-int dw_pcie_link_up(struct dw_pcie *pci)
-{
-	u32 val;
-
-	if (pci->ops->link_up)
-		return pci->ops->link_up(pci);
-
-	val = readl(pci->dbi_base + PCIE_PHY_DEBUG_R1);
-	return ((val & PCIE_PHY_DEBUG_R1_LINK_UP) &&
-		(!(val & PCIE_PHY_DEBUG_R1_LINK_IN_TRAINING)));
-}
-
-void dw_pcie_setup(struct dw_pcie *pci)
-{
-	int ret;
-	u32 val;
-	u32 lanes;
-	struct device *dev = pci->dev;
-	struct device_node *np = dev->of_node;
-
-	ret = of_property_read_u32(np, "num-lanes", &lanes);
-	if (ret)
-		lanes = 0;
-
-	/* Set the number of lanes */
-	val = dw_pcie_readl_dbi(pci, PCIE_PORT_LINK_CONTROL);
-	val &= ~PORT_LINK_MODE_MASK;
-	switch (lanes) {
-	case 1:
-		val |= PORT_LINK_MODE_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LINK_MODE_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LINK_MODE_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LINK_MODE_8_LANES;
-		break;
-	default:
-		dev_err(pci->dev, "num-lanes %u: invalid value\n", lanes);
-		return;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_PORT_LINK_CONTROL, val);
-
-	/* Set link width speed control register */
-	val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
-	val &= ~PORT_LOGIC_LINK_WIDTH_MASK;
-	switch (lanes) {
-	case 1:
-		val |= PORT_LOGIC_LINK_WIDTH_1_LANES;
-		break;
-	case 2:
-		val |= PORT_LOGIC_LINK_WIDTH_2_LANES;
-		break;
-	case 4:
-		val |= PORT_LOGIC_LINK_WIDTH_4_LANES;
-		break;
-	case 8:
-		val |= PORT_LOGIC_LINK_WIDTH_8_LANES;
-		break;
-	}
-	dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
-}