Merge tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Reserve ECAM so we don't assign it to PCI BARs; this works around
     bugs where BIOS included ECAM in a PNP0A03 host bridge window,
     didn't reserve it via a PNP0C02 motherboard device, and didn't
     allocate space for SR-IOV VF BARs (Bjorn Helgaas)

   - Add MMCONFIG/ECAM debug logging (Bjorn Helgaas)

   - Rename 'MMCONFIG' to 'ECAM' to match spec usage (Bjorn Helgaas)

   - Log device type (Root Port, Switch Port, etc) during enumeration
     (Bjorn Helgaas)

   - Log bridges before downstream devices so the dmesg order is more
     logical (Bjorn Helgaas)

   - Log resource names (BAR 0, VF BAR 0, bridge window, etc)
     consistently instead of a mix of names and "reg 0x10" (Puranjay
     Mohan, Bjorn Helgaas)

   - Fix 64GT/s effective data rate calculation to use 1b/1b encoding
     rather than the 8b/10b or 128b/130b used by lower rates (Ilpo
     Järvinen)

   - Use PCI_HEADER_TYPE_* instead of literals in x86, powerpc, SCSI
     lpfc (Ilpo Järvinen)

   - Clean up open-coded PCIBIOS return code mangling (Ilpo Järvinen)

  Resource management:

   - Restructure pci_dev_for_each_resource() to avoid computing the
     address of an out-of-bounds array element (the bounds check was
     performed later so the element was never actually *read*, but it's
     nicer to avoid even computing an out-of-bounds address) (Andy
     Shevchenko)

  Driver binding:

   - Convert pci-host-common.c platform .remove() callback to
     .remove_new() returning 'void' since it's not useful to return
     error codes here (Uwe Kleine-König)

   - Convert exynos, keystone, kirin from .remove() to .remove_new(),
     which returns void instead of int (Uwe Kleine-König)

   - Drop unused struct pci_driver.node member (Mathias Krause)

  Virtualization:

   - Add ACS quirk for more Zhaoxin Root Ports (LeoLiuoc)

  Error handling:

   - Log AER errors as "Correctable" (not "Corrected") or
     "Uncorrectable" to match spec terminology (Bjorn Helgaas)

   - Decode Requester ID when no error info found instead of printing
     the raw hex value (Bjorn Helgaas)

  Endpoint framework:

   - Use a unique test pattern for each BAR in the pci_endpoint_test to
     make it easier to debug address translation issues (Niklas Cassel)

  Broadcom STB PCIe controller driver:

   - Add DT property "brcm,clkreq-mode" and driver support for different
     CLKREQ# modes to make ASPM L1.x states possible (Jim Quinlan)

  Freescale Layerscape PCIe controller driver:

   - Add suspend/resume support for Layerscape LS1043a and LS1021a,
     including software-managed PME_Turn_Off and transitions between L0,
     L2/L3_Ready Link states (Frank Li)

  MediaTek PCIe controller driver:

   - Clear MSI interrupt status before handler to avoid missing MSIs
     that occur after the handler (qizhong cheng)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 translation window setup to handle MMIO space
     that is not a power of two in size (Jianjun Wang)

  Qualcomm PCIe controller driver:

   - Increase qcom iommu-map maxItems to accommodate SDX55 (five
     entries) and SDM845 (sixteen entries) (Krzysztof Kozlowski)

   - Describe qcom,pcie-sc8180x clocks and resets accurately (Krzysztof
     Kozlowski)

   - Describe qcom,pcie-sm8150 clocks and resets accurately (Krzysztof
     Kozlowski)

   - Correct the qcom "reset-name" property, previously incorrectly
     called "reset-names" (Krzysztof Kozlowski)

   - Document qcom,pcie-sm8650, based on qcom,pcie-sm8550 (Neil
     Armstrong)

  Renesas R-Car PCIe controller driver:

   - Replace of_device.h with explicit of.h include to untangle header
     usage (Rob Herring)

   - Add DT and driver support for optional miniPCIe 1.5v and 3.3v
     regulators on KingFisher (Wolfram Sang)

  SiFive FU740 PCIe controller driver:

   - Convert fu740 CONFIG_PCIE_FU740 dependency from SOC_SIFIVE to
     ARCH_SIFIVE (Conor Dooley)

  Synopsys DesignWare PCIe controller driver:

   - Align iATU mapping for endpoint MSI-X (Niklas Cassel)

   - Drop "host_" prefix from struct dw_pcie_host_ops members (Yoshihiro
     Shimoda)

   - Drop "ep_" prefix from struct dw_pcie_ep_ops members (Yoshihiro
     Shimoda)

   - Rename struct dw_pcie_ep_ops.func_conf_select() to
     .get_dbi_offset() to be more descriptive (Yoshihiro Shimoda)

   - Add Endpoint DBI accessors to encapsulate offset lookups (Yoshihiro
     Shimoda)

  TI J721E PCIe driver:

   - Add j721e DT and driver support for 'num-lanes' for devices that
     support x1, x2, or x4 Links (Matt Ranostay)

   - Add j721e DT compatible strings and driver support for j784s4 (Matt
     Ranostay)

   - Make TI J721E Kconfig depend on ARCH_K3 since the hardware is
     specific to those TI SoC parts (Peter Robinson)

  TI Keystone PCIe controller driver:

   - Hold power management references to all PHYs while enabling them to
     avoid a race when one provides clocks to others (Siddharth
     Vadapalli)

  Xilinx XDMA PCIe controller driver:

   - Remove redundant dev_err(), since platform_get_irq() and
     platform_get_irq_byname() already log errors (Yang Li)

   - Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
     (Krzysztof Wilczyński)

   - Fix xilinx_pl_dma_pcie_init_irq_domain() error return when
     irq_domain_add_linear() fails (Harshit Mogalapalli)

  MicroSemi Switchtec management driver:

   - Do dma_mrpc cleanup during switchtec_pci_remove() to match its devm
     ioremapping in switchtec_pci_probe(). Previously the cleanup was
     done in stdev_release(), which used stale pointers if stdev->cdev
     happened to be open when the PCI device was removed (Daniel
     Stodden)

  Miscellaneous:

   - Convert interrupt terminology from "legacy" to "INTx" to be more
     specific and match spec terminology (Damien Le Moal)

   - In dw-xdata-pcie, pci_endpoint_test, and vmd, replace usage of
     deprecated ida_simple_*() API with ida_alloc() and ida_free()
     (Christophe JAILLET)"

* tag 'pci-v6.8-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Fix kernel-doc issues
  PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device
  dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode"
  PCI: mediatek-gen3: Fix translation window size calculation
  PCI: mediatek: Clear interrupt status before dispatching handler
  PCI: keystone: Fix race condition when initializing PHYs
  PCI: xilinx-xdma: Fix error code in xilinx_pl_dma_pcie_init_irq_domain()
  PCI: xilinx-xdma: Fix uninitialized symbols in xilinx_pl_dma_pcie_setup_irq()
  PCI: rcar-gen4: Fix -Wvoid-pointer-to-enum-cast error
  PCI: iproc: Fix -Wvoid-pointer-to-enum-cast warning
  PCI: dwc: Add dw_pcie_ep_{read,write}_dbi[2] helpers
  PCI: dwc: Rename .func_conf_select to .get_dbi_offset in struct dw_pcie_ep_ops
  PCI: dwc: Rename .ep_init to .init in struct dw_pcie_ep_ops
  PCI: dwc: Drop host prefix from struct dw_pcie_host_ops members
  misc: pci_endpoint_test: Use a unique test pattern for each BAR
  PCI: j721e: Make TI J721E depend on ARCH_K3
  PCI: j721e: Add TI J784S4 PCIe configuration
  PCI/AER: Use explicit register sizes for struct members
  PCI/AER: Decode Requester ID when no error info found
  PCI/AER: Use 'Correctable' and 'Uncorrectable' spec terms for errors
  ...

1 files changed, 74 insertions, 11 deletions

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index ae550d71b815..43e11c9502d1 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -851,6 +851,66 @@ struct resource *pci_find_resource(struct pci_dev *dev, struct resource *res)
 EXPORT_SYMBOL(pci_find_resource);
 
 /**
+ * pci_resource_name - Return the name of the PCI resource
+ * @dev: PCI device to query
+ * @i: index of the resource
+ *
+ * Return the standard PCI resource (BAR) name according to their index.
+ */
+const char *pci_resource_name(struct pci_dev *dev, unsigned int i)
+{
+	static const char * const bar_name[] = {
+		"BAR 0",
+		"BAR 1",
+		"BAR 2",
+		"BAR 3",
+		"BAR 4",
+		"BAR 5",
+		"ROM",
+#ifdef CONFIG_PCI_IOV
+		"VF BAR 0",
+		"VF BAR 1",
+		"VF BAR 2",
+		"VF BAR 3",
+		"VF BAR 4",
+		"VF BAR 5",
+#endif
+		"bridge window",	/* "io" included in %pR */
+		"bridge window",	/* "mem" included in %pR */
+		"bridge window",	/* "mem pref" included in %pR */
+	};
+	static const char * const cardbus_name[] = {
+		"BAR 1",
+		"unknown",
+		"unknown",
+		"unknown",
+		"unknown",
+		"unknown",
+#ifdef CONFIG_PCI_IOV
+		"unknown",
+		"unknown",
+		"unknown",
+		"unknown",
+		"unknown",
+		"unknown",
+#endif
+		"CardBus bridge window 0",	/* I/O */
+		"CardBus bridge window 1",	/* I/O */
+		"CardBus bridge window 0",	/* mem */
+		"CardBus bridge window 1",	/* mem */
+	};
+
+	if (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS &&
+	    i < ARRAY_SIZE(cardbus_name))
+		return cardbus_name[i];
+
+	if (i < ARRAY_SIZE(bar_name))
+		return bar_name[i];
+
+	return "unknown";
+}
+
+/**
  * pci_wait_for_pending - wait for @mask bit(s) to clear in status word @pos
  * @dev: the PCI device to operate on
  * @pos: config space offset of status word
@@ -3299,6 +3359,7 @@ static struct resource *pci_ea_get_resource(struct pci_dev *dev, u8 bei,
 static int pci_ea_read(struct pci_dev *dev, int offset)
 {
 	struct resource *res;
+	const char *res_name;
 	int ent_size, ent_offset = offset;
 	resource_size_t start, end;
 	unsigned long flags;
@@ -3328,6 +3389,7 @@ static int pci_ea_read(struct pci_dev *dev, int offset)
 		goto out;
 
 	res = pci_ea_get_resource(dev, bei, prop);
+	res_name = pci_resource_name(dev, bei);
 	if (!res) {
 		pci_err(dev, "Unsupported EA entry BEI: %u\n", bei);
 		goto out;
@@ -3401,16 +3463,16 @@ static int pci_ea_read(struct pci_dev *dev, int offset)
 	res->flags = flags;
 
 	if (bei <= PCI_EA_BEI_BAR5)
-		pci_info(dev, "BAR %d: %pR (from Enhanced Allocation, properties %#02x)\n",
-			   bei, res, prop);
+		pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n",
+			 res_name, res, prop);
 	else if (bei == PCI_EA_BEI_ROM)
-		pci_info(dev, "ROM: %pR (from Enhanced Allocation, properties %#02x)\n",
-			   res, prop);
+		pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n",
+			 res_name, res, prop);
 	else if (bei >= PCI_EA_BEI_VF_BAR0 && bei <= PCI_EA_BEI_VF_BAR5)
-		pci_info(dev, "VF BAR %d: %pR (from Enhanced Allocation, properties %#02x)\n",
-			   bei - PCI_EA_BEI_VF_BAR0, res, prop);
+		pci_info(dev, "%s %pR: from Enhanced Allocation, properties %#02x\n",
+			 res_name, res, prop);
 	else
-		pci_info(dev, "BEI %d res: %pR (from Enhanced Allocation, properties %#02x)\n",
+		pci_info(dev, "BEI %d %pR: from Enhanced Allocation, properties %#02x\n",
 			   bei, res, prop);
 
 out:
@@ -6698,14 +6760,15 @@ static void pci_request_resource_alignment(struct pci_dev *dev, int bar,
 					   resource_size_t align, bool resize)
 {
 	struct resource *r = &dev->resource[bar];
+	const char *r_name = pci_resource_name(dev, bar);
 	resource_size_t size;
 
 	if (!(r->flags & IORESOURCE_MEM))
 		return;
 
 	if (r->flags & IORESOURCE_PCI_FIXED) {
-		pci_info(dev, "BAR%d %pR: ignoring requested alignment %#llx\n",
-			 bar, r, (unsigned long long)align);
+		pci_info(dev, "%s %pR: ignoring requested alignment %#llx\n",
+			 r_name, r, (unsigned long long)align);
 		return;
 	}
 
@@ -6741,8 +6804,8 @@ static void pci_request_resource_alignment(struct pci_dev *dev, int bar,
 	 * devices and we use the second.
 	 */
 
-	pci_info(dev, "BAR%d %pR: requesting alignment to %#llx\n",
-		 bar, r, (unsigned long long)align);
+	pci_info(dev, "%s %pR: requesting alignment to %#llx\n",
+		 r_name, r, (unsigned long long)align);
 
 	if (resize) {
 		r->start = 0;