summaryrefslogtreecommitdiff
path: root/drivers/phy
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@linuxfoundation.org>2019-02-12 14:59:43 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2019-02-12 14:59:43 +0100
commit0220dcd1138b77bd93ae554f651d1b61ad2403fa (patch)
tree891e7bdf8d08d9b2d0255e5d91ebdd29ca50f3b2 /drivers/phy
parenta8ded8eb7765233471b24bd23bdd65b44da5583a (diff)
parent203d9b11928cf68907344c24bd78726fa69de6cb (diff)
Merge tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
Kishon writes: phy: for 5.1 *) Add a new driver to support Armada 3700 COMPHY IP (supports SATA, USB3, PCIe) *) Add a new driver to support Armada UTMI PHY *) Add a new driver to support Cadence D-PHY *) Extend omap-usb2 PHY driver to be used for AM654 USB2 PHY *) Extend qcom-qmp PHY driver to be used for UFS PHY and USB3 PHY in Qualcomm MSM8998 *) Extend qcom-qusb2 PHY driver to support QUSB2 PHY in Qualcomm MSM8998 *) Remove module specific code that is present for drivers that can be only built-in *) Allow Freescale IMX8MQ USB to be used for multiple SoCs and not just i.MX8MQ *) Cleanups such as switch to SPDX identifier, use readl_poll_timeout macro, remove unused headers etc., Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> * tag 'phy-for-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy: (32 commits) phy: qcom-qmp: Add QMP UFS PHY support for msm8998 dt-bindings: phy-qcom-qmp: Add qcom,msm8998-qmp-ufs-phy phy: bcm-sr-pcie: Change operation when PIPEMUX=1 phy: Add Cadence D-PHY support dt-bindings: phy: Move the Cadence D-PHY bindings phy: dphy: Clarify lanes parameter documentation phy: dphy: Change units of wakeup and init parameters phy: dphy: Remove unused header MAINTAINERS: phy: fill Armada 3700 PHY drivers entry dt-bindings: phy: mvebu-utmi: add UTMI PHY bindings phy: add A3700 UTMI PHY driver MAINTAINERS: phy: add entry for Armada 3700 COMPHY driver dt-bindings: phy: mvebu-comphy: extend the file to describe a3700 bindings phy: add A3700 COMPHY support phy: mvebu-cp110-comphy: fix port check in ->xlate() phy: armada375-usb2: switch to SPDX license identifier phy: make phy-armada375-usb2 explicitly non-modular phy: make phy-mvebu-sata explicitly non-modular phy: make phy-core explicitly non-modular phy: qcom-qusb2: Add QUSB2 PHY support for msm8998 ...
Diffstat (limited to 'drivers/phy')
-rw-r--r--drivers/phy/broadcom/phy-bcm-sr-pcie.c4
-rw-r--r--drivers/phy/cadence/Kconfig13
-rw-r--r--drivers/phy/cadence/Makefile1
-rw-r--r--drivers/phy/cadence/cdns-dphy.c391
-rw-r--r--drivers/phy/freescale/Kconfig2
-rw-r--r--drivers/phy/marvell/Kconfig21
-rw-r--r--drivers/phy/marvell/Makefile2
-rw-r--r--drivers/phy/marvell/phy-armada375-usb2.c13
-rw-r--r--drivers/phy/marvell/phy-mvebu-a3700-comphy.c318
-rw-r--r--drivers/phy/marvell/phy-mvebu-a3700-utmi.c278
-rw-r--r--drivers/phy/marvell/phy-mvebu-cp110-comphy.c2
-rw-r--r--drivers/phy/marvell/phy-mvebu-sata.c9
-rw-r--r--drivers/phy/phy-core-mipi-dphy.c8
-rw-r--r--drivers/phy/phy-core.c12
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c143
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.h4
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qusb2.c40
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-i.h19
-rw-r--r--drivers/phy/rockchip/phy-rockchip-inno-usb2.c48
-rw-r--r--drivers/phy/ti/Kconfig6
-rw-r--r--drivers/phy/ti/phy-omap-usb2.c105
21 files changed, 1309 insertions, 130 deletions
diff --git a/drivers/phy/broadcom/phy-bcm-sr-pcie.c b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
index c10e95f86de5..96a3af126a78 100644
--- a/drivers/phy/broadcom/phy-bcm-sr-pcie.c
+++ b/drivers/phy/broadcom/phy-bcm-sr-pcie.c
@@ -78,8 +78,8 @@ struct sr_pcie_phy_core {
static const u8 pipemux_table[] = {
/* PIPEMUX = 0, EP 1x16 */
0x00,
- /* PIPEMUX = 1, EP 2x8 */
- 0x00,
+ /* PIPEMUX = 1, EP 1x8 + RC 1x8, core 7 */
+ 0x80,
/* PIPEMUX = 2, EP 4x4 */
0x00,
/* PIPEMUX = 3, RC 2x8, cores 0, 7 */
diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig
index 2b8c0851ff33..31f18b67dd7c 100644
--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
@@ -1,6 +1,7 @@
#
# Phy drivers for Cadence PHYs
#
+
config PHY_CADENCE_DP
tristate "Cadence MHDP DisplayPort PHY driver"
depends on OF
@@ -9,9 +10,19 @@ config PHY_CADENCE_DP
help
Support for Cadence MHDP DisplayPort PHY.
+config PHY_CADENCE_DPHY
+ tristate "Cadence D-PHY Support"
+ depends on HAS_IOMEM && OF
+ select GENERIC_PHY
+ select GENERIC_PHY_MIPI_DPHY
+ help
+ Choose this option if you have a Cadence D-PHY in your
+ system. If M is selected, the module will be called
+ cdns-dphy.
+
config PHY_CADENCE_SIERRA
tristate "Cadence Sierra PHY Driver"
depends on OF && HAS_IOMEM && RESET_CONTROLLER
select GENERIC_PHY
help
- Enable this to support the Cadence Sierra PHY driver \ No newline at end of file
+ Enable this to support the Cadence Sierra PHY driver
diff --git a/drivers/phy/cadence/Makefile b/drivers/phy/cadence/Makefile
index 412349af0492..2f9e3457b954 100644
--- a/drivers/phy/cadence/Makefile
+++ b/drivers/phy/cadence/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_PHY_CADENCE_DP) += phy-cadence-dp.o
+obj-$(CONFIG_PHY_CADENCE_DPHY) += cdns-dphy.o
obj-$(CONFIG_PHY_CADENCE_SIERRA) += phy-cadence-sierra.o
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
new file mode 100644
index 000000000000..90c4e9b5aac8
--- /dev/null
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -0,0 +1,391 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright: 2017-2018 Cadence Design Systems, Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include <linux/phy/phy.h>
+#include <linux/phy/phy-mipi-dphy.h>
+
+#define REG_WAKEUP_TIME_NS 800
+#define DPHY_PLL_RATE_HZ 108000000
+
+/* DPHY registers */
+#define DPHY_PMA_CMN(reg) (reg)
+#define DPHY_PMA_LCLK(reg) (0x100 + (reg))
+#define DPHY_PMA_LDATA(lane, reg) (0x200 + ((lane) * 0x100) + (reg))
+#define DPHY_PMA_RCLK(reg) (0x600 + (reg))
+#define DPHY_PMA_RDATA(lane, reg) (0x700 + ((lane) * 0x100) + (reg))
+#define DPHY_PCS(reg) (0xb00 + (reg))
+
+#define DPHY_CMN_SSM DPHY_PMA_CMN(0x20)
+#define DPHY_CMN_SSM_EN BIT(0)
+#define DPHY_CMN_TX_MODE_EN BIT(9)
+
+#define DPHY_CMN_PWM DPHY_PMA_CMN(0x40)
+#define DPHY_CMN_PWM_DIV(x) ((x) << 20)
+#define DPHY_CMN_PWM_LOW(x) ((x) << 10)
+#define DPHY_CMN_PWM_HIGH(x) (x)
+
+#define DPHY_CMN_FBDIV DPHY_PMA_CMN(0x4c)
+#define DPHY_CMN_FBDIV_VAL(low, high) (((high) << 11) | ((low) << 22))
+#define DPHY_CMN_FBDIV_FROM_REG (BIT(10) | BIT(21))
+
+#define DPHY_CMN_OPIPDIV DPHY_PMA_CMN(0x50)
+#define DPHY_CMN_IPDIV_FROM_REG BIT(0)
+#define DPHY_CMN_IPDIV(x) ((x) << 1)
+#define DPHY_CMN_OPDIV_FROM_REG BIT(6)
+#define DPHY_CMN_OPDIV(x) ((x) << 7)
+
+#define DPHY_PSM_CFG DPHY_PCS(0x4)
+#define DPHY_PSM_CFG_FROM_REG BIT(0)
+#define DPHY_PSM_CLK_DIV(x) ((x) << 1)
+
+#define DSI_HBP_FRAME_OVERHEAD 12
+#define DSI_HSA_FRAME_OVERHEAD 14
+#define DSI_HFP_FRAME_OVERHEAD 6
+#define DSI_HSS_VSS_VSE_FRAME_OVERHEAD 4
+#define DSI_BLANKING_FRAME_OVERHEAD 6
+#define DSI_NULL_FRAME_OVERHEAD 6
+#define DSI_EOT_PKT_SIZE 4
+
+struct cdns_dphy_cfg {
+ u8 pll_ipdiv;
+ u8 pll_opdiv;
+ u16 pll_fbdiv;
+ unsigned int nlanes;
+};
+
+enum cdns_dphy_clk_lane_cfg {
+ DPHY_CLK_CFG_LEFT_DRIVES_ALL = 0,
+ DPHY_CLK_CFG_LEFT_DRIVES_RIGHT = 1,
+ DPHY_CLK_CFG_LEFT_DRIVES_LEFT = 2,
+ DPHY_CLK_CFG_RIGHT_DRIVES_ALL = 3,
+};
+
+struct cdns_dphy;
+struct cdns_dphy_ops {
+ int (*probe)(struct cdns_dphy *dphy);
+ void (*remove)(struct cdns_dphy *dphy);
+ void (*set_psm_div)(struct cdns_dphy *dphy, u8 div);
+ void (*set_clk_lane_cfg)(struct cdns_dphy *dphy,
+ enum cdns_dphy_clk_lane_cfg cfg);
+ void (*set_pll_cfg)(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg);
+ unsigned long (*get_wakeup_time_ns)(struct cdns_dphy *dphy);
+};
+
+struct cdns_dphy {
+ struct cdns_dphy_cfg cfg;
+ void __iomem *regs;
+ struct clk *psm_clk;
+ struct clk *pll_ref_clk;
+ const struct cdns_dphy_ops *ops;
+ struct phy *phy;
+};
+
+static int cdns_dsi_get_dphy_pll_cfg(struct cdns_dphy *dphy,
+ struct cdns_dphy_cfg *cfg,
+ struct phy_configure_opts_mipi_dphy *opts,
+ unsigned int *dsi_hfp_ext)
+{
+ unsigned long pll_ref_hz = clk_get_rate(dphy->pll_ref_clk);
+ u64 dlane_bps;
+
+ memset(cfg, 0, sizeof(*cfg));
+
+ if (pll_ref_hz < 9600000 || pll_ref_hz >= 150000000)
+ return -EINVAL;
+ else if (pll_ref_hz < 19200000)
+ cfg->pll_ipdiv = 1;
+ else if (pll_ref_hz < 38400000)
+ cfg->pll_ipdiv = 2;
+ else if (pll_ref_hz < 76800000)
+ cfg->pll_ipdiv = 4;
+ else
+ cfg->pll_ipdiv = 8;
+
+ dlane_bps = opts->hs_clk_rate;
+
+ if (dlane_bps > 2500000000UL || dlane_bps < 160000000UL)
+ return -EINVAL;
+ else if (dlane_bps >= 1250000000)
+ cfg->pll_opdiv = 1;
+ else if (dlane_bps >= 630000000)
+ cfg->pll_opdiv = 2;
+ else if (dlane_bps >= 320000000)
+ cfg->pll_opdiv = 4;
+ else if (dlane_bps >= 160000000)
+ cfg->pll_opdiv = 8;
+
+ cfg->pll_fbdiv = DIV_ROUND_UP_ULL(dlane_bps * 2 * cfg->pll_opdiv *
+ cfg->pll_ipdiv,
+ pll_ref_hz);
+
+ return 0;
+}
+
+static int cdns_dphy_setup_psm(struct cdns_dphy *dphy)
+{
+ unsigned long psm_clk_hz = clk_get_rate(dphy->psm_clk);
+ unsigned long psm_div;
+
+ if (!psm_clk_hz || psm_clk_hz > 100000000)
+ return -EINVAL;
+
+ psm_div = DIV_ROUND_CLOSEST(psm_clk_hz, 1000000);
+ if (dphy->ops->set_psm_div)
+ dphy->ops->set_psm_div(dphy, psm_div);
+
+ return 0;
+}
+
+static void cdns_dphy_set_clk_lane_cfg(struct cdns_dphy *dphy,
+ enum cdns_dphy_clk_lane_cfg cfg)
+{
+ if (dphy->ops->set_clk_lane_cfg)
+ dphy->ops->set_clk_lane_cfg(dphy, cfg);
+}
+
+static void cdns_dphy_set_pll_cfg(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg)
+{
+ if (dphy->ops->set_pll_cfg)
+ dphy->ops->set_pll_cfg(dphy, cfg);
+}
+
+static unsigned long cdns_dphy_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+ return dphy->ops->get_wakeup_time_ns(dphy);
+}
+
+static unsigned long cdns_dphy_ref_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+ /* Default wakeup time is 800 ns (in a simulated environment). */
+ return 800;
+}
+
+static void cdns_dphy_ref_set_pll_cfg(struct cdns_dphy *dphy,
+ const struct cdns_dphy_cfg *cfg)
+{
+ u32 fbdiv_low, fbdiv_high;
+
+ fbdiv_low = (cfg->pll_fbdiv / 4) - 2;
+ fbdiv_high = cfg->pll_fbdiv - fbdiv_low - 2;
+
+ writel(DPHY_CMN_IPDIV_FROM_REG | DPHY_CMN_OPDIV_FROM_REG |
+ DPHY_CMN_IPDIV(cfg->pll_ipdiv) |
+ DPHY_CMN_OPDIV(cfg->pll_opdiv),
+ dphy->regs + DPHY_CMN_OPIPDIV);
+ writel(DPHY_CMN_FBDIV_FROM_REG |
+ DPHY_CMN_FBDIV_VAL(fbdiv_low, fbdiv_high),
+ dphy->regs + DPHY_CMN_FBDIV);
+ writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) |
+ DPHY_CMN_PWM_DIV(0x8),
+ dphy->regs + DPHY_CMN_PWM);
+}
+
+static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div)
+{
+ writel(DPHY_PSM_CFG_FROM_REG | DPHY_PSM_CLK_DIV(div),
+ dphy->regs + DPHY_PSM_CFG);
+}
+
+/*
+ * This is the reference implementation of DPHY hooks. Specific integration of
+ * this IP may have to re-implement some of them depending on how they decided
+ * to wire things in the SoC.
+ */
+static const struct cdns_dphy_ops ref_dphy_ops = {
+ .get_wakeup_time_ns = cdns_dphy_ref_get_wakeup_time_ns,
+ .set_pll_cfg = cdns_dphy_ref_set_pll_cfg,
+ .set_psm_div = cdns_dphy_ref_set_psm_div,
+};
+
+static int cdns_dphy_config_from_opts(struct phy *phy,
+ struct phy_configure_opts_mipi_dphy *opts,
+ struct cdns_dphy_cfg *cfg)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ unsigned int dsi_hfp_ext = 0;
+ int ret;
+
+ ret = phy_mipi_dphy_config_validate(opts);
+ if (ret)
+ return ret;
+
+ ret = cdns_dsi_get_dphy_pll_cfg(dphy, cfg,
+ opts, &dsi_hfp_ext);
+ if (ret)
+ return ret;
+
+ opts->wakeup = cdns_dphy_get_wakeup_time_ns(dphy) / 1000;
+
+ return 0;
+}
+
+static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
+ union phy_configure_opts *opts)
+{
+ struct cdns_dphy_cfg cfg = { 0 };
+
+ if (mode != PHY_MODE_MIPI_DPHY)
+ return -EINVAL;
+
+ return cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+}
+
+static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+ struct cdns_dphy_cfg cfg = { 0 };
+ int ret;
+
+ ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure the internal PSM clk divider so that the DPHY has a
+ * 1MHz clk (or something close).
+ */
+ ret = cdns_dphy_setup_psm(dphy);
+ if (ret)
+ return ret;
+
+ /*
+ * Configure attach clk lanes to data lanes: the DPHY has 2 clk lanes
+ * and 8 data lanes, each clk lane can be attache different set of
+ * data lanes. The 2 groups are named 'left' and 'right', so here we
+ * just say that we want the 'left' clk lane to drive the 'left' data
+ * lanes.
+ */
+ cdns_dphy_set_clk_lane_cfg(dphy, DPHY_CLK_CFG_LEFT_DRIVES_LEFT);
+
+ /*
+ * Configure the DPHY PLL that will be used to generate the TX byte
+ * clk.
+ */
+ cdns_dphy_set_pll_cfg(dphy, &cfg);
+
+ return 0;
+}
+
+static int cdns_dphy_power_on(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+
+ clk_prepare_enable(dphy->psm_clk);
+ clk_prepare_enable(dphy->pll_ref_clk);
+
+ /* Start TX state machine. */
+ writel(DPHY_CMN_SSM_EN | DPHY_CMN_TX_MODE_EN,
+ dphy->regs + DPHY_CMN_SSM);
+
+ return 0;
+}
+
+static int cdns_dphy_power_off(struct phy *phy)
+{
+ struct cdns_dphy *dphy = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(dphy->pll_ref_clk);
+ clk_disable_unprepare(dphy->psm_clk);
+
+ return 0;
+}
+
+static const struct phy_ops cdns_dphy_ops = {
+ .configure = cdns_dphy_configure,
+ .validate = cdns_dphy_validate,
+ .power_on = cdns_dphy_power_on,
+ .power_off = cdns_dphy_power_off,
+};
+
+static int cdns_dphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *phy_provider;
+ struct cdns_dphy *dphy;
+ struct resource *res;
+ int ret;
+
+ dphy = devm_kzalloc(&pdev->dev, sizeof(*dphy), GFP_KERNEL);
+ if (!dphy)
+ return -ENOMEM;
+ dev_set_drvdata(&pdev->dev, dphy);
+
+ dphy->ops = of_device_get_match_data(&pdev->dev);
+ if (!dphy->ops)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ dphy->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(dphy->regs))
+ return PTR_ERR(dphy->regs);
+
+ dphy->psm_clk = devm_clk_get(&pdev->dev, "psm");
+ if (IS_ERR(dphy->psm_clk))
+ return PTR_ERR(dphy->psm_clk);
+
+ dphy->pll_ref_clk = devm_clk_get(&pdev->dev, "pll_ref");
+ if (IS_ERR(dphy->pll_ref_clk))
+ return PTR_ERR(dphy->pll_ref_clk);
+
+ if (dphy->ops->probe) {
+ ret = dphy->ops->probe(dphy);
+ if (ret)
+ return ret;
+ }
+
+ dphy->phy = devm_phy_create(&pdev->dev, NULL, &cdns_dphy_ops);
+ if (IS_ERR(dphy->phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ if (dphy->ops->remove)
+ dphy->ops->remove(dphy);
+ return PTR_ERR(dphy->phy);
+ }
+
+ phy_set_drvdata(dphy->phy, dphy);
+ phy_provider = devm_of_phy_provider_register(&pdev->dev,
+ of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static int cdns_dphy_remove(struct platform_device *pdev)
+{
+ struct cdns_dphy *dphy = dev_get_drvdata(&pdev->dev);
+
+ if (dphy->ops->remove)
+ dphy->ops->remove(dphy);
+
+ return 0;
+}
+
+static const struct of_device_id cdns_dphy_of_match[] = {
+ { .compatible = "cdns,dphy", .data = &ref_dphy_ops },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, cdns_dphy_of_match);
+
+static struct platform_driver cdns_dphy_platform_driver = {
+ .probe = cdns_dphy_probe,
+ .remove = cdns_dphy_remove,
+ .driver = {
+ .name = "cdns-mipi-dphy",
+ .of_match_table = cdns_dphy_of_match,
+ },
+};
+module_platform_driver(cdns_dphy_platform_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@bootlin.com>");
+MODULE_DESCRIPTION("Cadence MIPI D-PHY Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/freescale/Kconfig b/drivers/phy/freescale/Kconfig
index f050bd4e97e0..832670b4952b 100644
--- a/drivers/phy/freescale/Kconfig
+++ b/drivers/phy/freescale/Kconfig
@@ -2,4 +2,4 @@ config PHY_FSL_IMX8MQ_USB
tristate "Freescale i.MX8M USB3 PHY"
depends on OF && HAS_IOMEM
select GENERIC_PHY
- default SOC_IMX8MQ
+ default ARCH_MXC && ARM64
diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig
index 6fb4b56e4c14..b8e9dd38ad0d 100644
--- a/drivers/phy/marvell/Kconfig
+++ b/drivers/phy/marvell/Kconfig
@@ -21,6 +21,27 @@ config PHY_BERLIN_USB
help
Enable this to support the USB PHY on Marvell Berlin SoCs.
+config PHY_MVEBU_A3700_COMPHY
+ tristate "Marvell A3700 comphy driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ depends on HAVE_ARM_SMCCC
+ default y
+ select GENERIC_PHY
+ help
+ This driver allows to control the comphy, a hardware block providing
+ shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be
+ used by various controllers: Ethernet, SATA, USB3, PCIe.
+
+config PHY_MVEBU_A3700_UTMI
+ tristate "Marvell A3700 UTMI driver"
+ depends on ARCH_MVEBU || COMPILE_TEST
+ depends on OF
+ default y
+ select GENERIC_PHY
+ help
+ Enable this to support Marvell A3700 UTMI PHY driver.
+
config PHY_MVEBU_CP110_COMPHY
tristate "Marvell CP110 comphy driver"
depends on ARCH_MVEBU || COMPILE_TEST
diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile
index 3975b144f8ec..82f291cf59ee 100644
--- a/drivers/phy/marvell/Makefile
+++ b/drivers/phy/marvell/Makefile
@@ -2,6 +2,8 @@
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
+obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o
+obj-$(CONFIG_PHY_MVEBU_A3700_UTMI) += phy-mvebu-a3700-utmi.o
obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o
obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
diff --git a/drivers/phy/marvell/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c
index 1a3db288c0a9..fa5dc9462d09 100644
--- a/drivers/phy/marvell/phy-armada375-usb2.c
+++ b/drivers/phy/marvell/phy-armada375-usb2.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0+
/*
* USB cluster support for Armada 375 platform.
*
@@ -5,10 +6,6 @@
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
- * This file is licensed under the terms of the GNU General Public
- * License version 2 or later. This program is licensed "as is"
- * without any warranty of any kind, whether express or implied.
- *
* Armada 375 comes with an USB2 host and device controller and an
* USB3 controller. The USB cluster control register allows to manage
* common features of both USB controllers.
@@ -18,7 +15,6 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
-#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
@@ -142,7 +138,6 @@ static const struct of_device_id of_usb_cluster_table[] = {
{ .compatible = "marvell,armada-375-usb-cluster", },
{ /* end of list */ },
};
-MODULE_DEVICE_TABLE(of, of_usb_cluster_table);
static struct platform_driver armada375_usb_phy_driver = {
.probe = armada375_usb_phy_probe,
@@ -151,8 +146,4 @@ static struct platform_driver armada375_usb_phy_driver = {
.name = "armada-375-usb-cluster",
}
};
-module_platform_driver(armada375_usb_phy_driver);
-
-MODULE_DESCRIPTION("Armada 375 USB cluster driver");
-MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
-MODULE_LICENSE("GPL");
+builtin_platform_driver(armada375_usb_phy_driver);
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-comphy.c b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
new file mode 100644
index 000000000000..8812a104c233
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ * Evan Wang <xswang@marvell.com>
+ * Miquèl Raynal <miquel.raynal@bootlin.com>
+ *
+ * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart.
+ * SMC call initial support done by Grzegorz Jaszczyk.
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+#define MVEBU_A3700_COMPHY_LANES 3
+#define MVEBU_A3700_COMPHY_PORTS 2
+
+/* COMPHY Fast SMC function identifiers */
+#define COMPHY_SIP_POWER_ON 0x82000001
+#define COMPHY_SIP_POWER_OFF 0x82000002
+#define COMPHY_SIP_PLL_LOCK 0x82000003
+
+#define COMPHY_FW_MODE_SATA 0x1
+#define COMPHY_FW_MODE_SGMII 0x2
+#define COMPHY_FW_MODE_HS_SGMII 0x3
+#define COMPHY_FW_MODE_USB3H 0x4
+#define COMPHY_FW_MODE_USB3D 0x5
+#define COMPHY_FW_MODE_PCIE 0x6
+#define COMPHY_FW_MODE_RXAUI 0x7
+#define COMPHY_FW_MODE_XFI 0x8
+#define COMPHY_FW_MODE_SFI 0x9
+#define COMPHY_FW_MODE_USB3 0xa
+
+#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */
+#define COMPHY_FW_SPEED_2_5G 1
+#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */
+#define COMPHY_FW_SPEED_5G 3
+#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */
+#define COMPHY_FW_SPEED_6G 5
+#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */
+#define COMPHY_FW_SPEED_MAX 0x3F
+
+#define COMPHY_FW_MODE(mode) ((mode) << 12)
+#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \
+ ((idx) << 8) | \
+ ((speed) << 2))
+#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \
+ ((width) << 18))
+
+struct mvebu_a3700_comphy_conf {
+ unsigned int lane;
+ enum phy_mode mode;
+ int submode;
+ unsigned int port;
+ u32 fw_mode;
+};
+
+#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \
+ { \
+ .lane = _lane, \
+ .mode = _mode, \
+ .submode = _smode, \
+ .port = _port, \
+ .fw_mode = _fw, \
+ }
+
+#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \
+ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw)
+
+#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \
+ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw)
+
+static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = {
+ /* lane 0 */
+ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0,
+ COMPHY_FW_MODE_USB3H),
+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1,
+ COMPHY_FW_MODE_SGMII),
+ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1,
+ COMPHY_FW_MODE_HS_SGMII),
+ /* lane 1 */
+ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0,
+ COMPHY_FW_MODE_PCIE),
+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0,
+ COMPHY_FW_MODE_SGMII),
+ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0,
+ COMPHY_FW_MODE_HS_SGMII),
+ /* lane 2 */
+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0,
+ COMPHY_FW_MODE_SATA),
+ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0,
+ COMPHY_FW_MODE_USB3H),
+};
+
+struct mvebu_a3700_comphy_lane {
+ struct device *dev;
+ unsigned int id;
+ enum phy_mode mode;
+ int submode;
+ int port;
+};
+
+static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane,
+ unsigned long mode)
+{
+ struct arm_smccc_res res;
+
+ arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res);
+
+ return res.a0;
+}
+
+static int mvebu_a3700_comphy_get_fw_mode(int lane, int port,
+ enum phy_mode mode,
+ int submode)
+{
+ int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes);
+
+ /* Unused PHY mux value is 0x0 */
+ if (mode == PHY_MODE_INVALID)
+ return -EINVAL;
+
+ for (i = 0; i < n; i++) {
+ if (mvebu_a3700_comphy_modes[i].lane == lane &&
+ mvebu_a3700_comphy_modes[i].port == port &&
+ mvebu_a3700_comphy_modes[i].mode == mode &&
+ mvebu_a3700_comphy_modes[i].submode == submode)
+ break;
+ }
+
+ if (i == n)
+ return -EINVAL;
+
+ return mvebu_a3700_comphy_modes[i].fw_mode;
+}
+
+static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ int fw_mode;
+
+ if (submode == PHY_INTERFACE_MODE_1000BASEX)
+ submode = PHY_INTERFACE_MODE_SGMII;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode,
+ submode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ /* Just remember the mode, ->power_on() will do the real setup */
+ lane->mode = mode;
+ lane->submode = submode;
+
+ return 0;
+}
+
+static int mvebu_a3700_comphy_power_on(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+ u32 fw_param;
+ int fw_mode;
+
+ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port,
+ lane->mode, lane->submode);
+ if (fw_mode < 0) {
+ dev_err(lane->dev, "invalid COMPHY mode\n");
+ return fw_mode;
+ }
+
+ switch (lane->mode) {
+ case PHY_MODE_USB_HOST_SS:
+ dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_SATA:
+ dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id);
+ fw_param = COMPHY_FW_MODE(fw_mode);
+ break;
+ case PHY_MODE_ETHERNET:
+ switch (lane->submode) {
+ case PHY_INTERFACE_MODE_SGMII:
+ dev_dbg(lane->dev, "set lane %d to SGMII mode\n",
+ lane->id);
+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+ COMPHY_FW_SPEED_1_25G);
+ break;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n",
+ lane->id);
+ fw_param = COMPHY_FW_NET(fw_mode, lane->port,
+ COMPHY_FW_SPEED_3_125G);
+ break;
+ default:
+ dev_err(lane->dev, "unsupported PHY submode (%d)\n",
+ lane->submode);
+ return -ENOTSUPP;
+ }
+ break;
+ case PHY_MODE_PCIE:
+ dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id);
+ fw_param = COMPHY_FW_PCIE(fw_mode, lane->port,
+ COMPHY_FW_SPEED_5G,
+ phy->attrs.bus_width);
+ break;
+ default:
+ dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode);
+ return -ENOTSUPP;
+ }
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param);
+}
+
+static int mvebu_a3700_comphy_power_off(struct phy *phy)
+{
+ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy);
+
+ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0);
+}
+
+static const struct phy_ops mvebu_a3700_comphy_ops = {
+ .power_on = mvebu_a3700_comphy_power_on,
+ .power_off = mvebu_a3700_comphy_power_off,
+ .set_mode = mvebu_a3700_comphy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *mvebu_a3700_comphy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+
+ if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS))
+ return ERR_PTR(-EINVAL);
+
+ phy = of_phy_simple_xlate(dev, args);
+ if (IS_ERR(phy))
+ return phy;
+
+ lane = phy_get_drvdata(phy);
+ lane->port = args->args[0];
+
+ return phy;
+}
+
+static int mvebu_a3700_comphy_probe(struct platform_device *pdev)
+{
+ struct phy_provider *provider;
+ struct device_node *child;
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+ struct mvebu_a3700_comphy_lane *lane;
+ struct phy *phy;
+ int ret;
+ u32 lane_id;
+
+ ret = of_property_read_u32(child, "reg", &lane_id);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing 'reg' property (%d)\n",
+ ret);
+ continue;
+ }
+
+ if (lane_id >= MVEBU_A3700_COMPHY_LANES) {
+ dev_err(&pdev->dev, "invalid 'reg' property\n");
+ continue;
+ }
+
+ lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL);
+ if (!lane)
+ return -ENOMEM;
+
+ phy = devm_phy_create(&pdev->dev, child,
+ &mvebu_a3700_comphy_ops);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ lane->dev = &pdev->dev;
+ lane->mode = PHY_MODE_INVALID;
+ lane->submode = PHY_INTERFACE_MODE_NA;
+ lane->id = lane_id;
+ lane->port = -1;
+ phy_set_drvdata(phy, lane);
+ }
+
+ provider = devm_of_phy_provider_register(&pdev->dev,
+ mvebu_a3700_comphy_xlate);
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = {
+ { .compatible = "marvell,comphy-a3700" },
+ { },
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table);
+
+static struct platform_driver mvebu_a3700_comphy_driver = {
+ .probe = mvebu_a3700_comphy_probe,
+ .driver = {
+ .name = "mvebu-a3700-comphy",
+ .of_match_table = mvebu_a3700_comphy_of_match_table,
+ },
+};
+module_platform_driver(mvebu_a3700_comphy_driver);
+
+MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Common PHY driver for A3700");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
new file mode 100644
index 000000000000..94a29dea57af
--- /dev/null
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell
+ *
+ * Authors:
+ * Igal Liberman <igall@marvell.com>
+ * Miquèl Raynal <miquel.raynal@bootlin.com>
+ *
+ * Marvell A3700 UTMI PHY driver
+ */
+
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+/* Armada 3700 UTMI PHY registers */
+#define USB2_PHY_PLL_CTRL_REG0 0x0
+#define PLL_REF_DIV_OFF 0
+#define PLL_REF_DIV_MASK GENMASK(6, 0)
+#define PLL_REF_DIV_5 5
+#define PLL_FB_DIV_OFF 16
+#define PLL_FB_DIV_MASK GENMASK(24, 16)
+#define PLL_FB_DIV_96 96
+#define PLL_SEL_LPFR_OFF 28
+#define PLL_SEL_LPFR_MASK GENMASK(29, 28)
+#define PLL_READY BIT(31)
+#define USB2_PHY_CAL_CTRL 0x8
+#define PHY_PLLCAL_DONE BIT(31)
+#define PHY_IMPCAL_DONE BIT(23)
+#define USB2_RX_CHAN_CTRL1 0x18
+#define USB2PHY_SQCAL_DONE BIT(31)
+#define USB2_PHY_OTG_CTRL 0x34
+#define PHY_PU_OTG BIT(4)
+#define USB2_PHY_CHRGR_DETECT 0x38
+#define PHY_CDP_EN BIT(2)
+#define PHY_DCP_EN BIT(3)
+#define PHY_PD_EN BIT(4)
+#define PHY_PU_CHRG_DTC BIT(5)
+#define PHY_CDP_DM_AUTO BIT(7)
+#define PHY_ENSWITCH_DP BIT(12)
+#define PHY_ENSWITCH_DM BIT(13)
+
+/* Armada 3700 USB miscellaneous registers */
+#define USB2_PHY_CTRL(usb32) (usb32 ? 0x20 : 0x4)
+#define RB_USB2PHY_PU BIT(0)
+#define USB2_DP_PULLDN_DEV_MODE BIT(5)
+#define USB2_DM_PULLDN_DEV_MODE BIT(6)
+#define RB_USB2PHY_SUSPM(usb32) (usb32 ? BIT(14) : BIT(7))
+
+#define PLL_LOCK_DELAY_US 10000
+#define PLL_LOCK_TIMEOUT_US 1000000
+
+/**
+ * struct mvebu_a3700_utmi_caps - PHY capabilities
+ *
+ * @usb32: Flag indicating which PHY is in use (impacts the register map):
+ * - The UTMI PHY wired to the USB3/USB2 controller (otg)
+ * - The UTMI PHY wired to the USB2 controller (host only)
+ * @ops: PHY operations
+ */
+struct mvebu_a3700_utmi_caps {
+ int usb32;
+ const struct phy_ops *ops;
+};
+
+/**
+ * struct mvebu_a3700_utmi - PHY driver data
+ *
+ * @regs: PHY registers
+ * @usb_mis: Regmap with USB miscellaneous registers including PHY ones
+ * @caps: PHY capabilities
+ * @phy: PHY handle
+ */
+struct mvebu_a3700_utmi {
+ void __iomem *regs;
+ struct regmap *usb_misc;
+ const struct mvebu_a3700_utmi_caps *caps;
+ struct phy *phy;
+};
+
+static int mvebu_a3700_utmi_phy_power_on(struct phy *phy)
+{
+ struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
+ struct device *dev = &phy->dev;
+ int usb32 = utmi->caps->usb32;
+ int ret = 0;
+ u32 reg;
+
+ /*
+ * Setup PLL. 40MHz clock used to be the default, being 25MHz now.
+ * See "PLL Settings for Typical REFCLK" table.
+ */
+ reg = readl(utmi->regs + USB2_PHY_PLL_CTRL_REG0);
+ reg &= ~(PLL_REF_DIV_MASK | PLL_FB_DIV_MASK | PLL_SEL_LPFR_MASK);
+ reg |= (PLL_REF_DIV_5 << PLL_REF_DIV_OFF) |
+ (PLL_FB_DIV_96 << PLL_FB_DIV_OFF);
+ writel(reg, utmi->regs + USB2_PHY_PLL_CTRL_REG0);
+
+ /* Enable PHY pull up and disable USB2 suspend */
+ regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
+ RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU,
+ RB_USB2PHY_SUSPM(usb32) | RB_USB2PHY_PU);
+
+ if (usb32) {
+ /* Power up OTG module */
+ reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
+ reg |= PHY_PU_OTG;
+ writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
+
+ /* Disable PHY charger detection */
+ reg = readl(utmi->regs + USB2_PHY_CHRGR_DETECT);
+ reg &= ~(PHY_CDP_EN | PHY_DCP_EN | PHY_PD_EN | PHY_PU_CHRG_DTC |
+ PHY_CDP_DM_AUTO | PHY_ENSWITCH_DP | PHY_ENSWITCH_DM);
+ writel(reg, utmi->regs + USB2_PHY_CHRGR_DETECT);
+
+ /* Disable PHY DP/DM pull-down (used for device mode) */
+ regmap_update_bits(utmi->usb_misc, USB2_PHY_CTRL(usb32),
+ USB2_DP_PULLDN_DEV_MODE |
+ USB2_DM_PULLDN_DEV_MODE, 0);
+ }
+
+ /* Wait for PLL calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
+ reg & PHY_PLLCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 PLL calibration\n");
+ return ret;
+ }
+
+ /* Wait for impedance calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_CAL_CTRL, reg,
+ reg & PHY_IMPCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 impedance calibration\n");
+ return ret;
+ }
+
+ /* Wait for squelch calibration */
+ ret = readl_poll_timeout(utmi->regs + USB2_RX_CHAN_CTRL1, reg,
+ reg & USB2PHY_SQCAL_DONE,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret) {
+ dev_err(dev, "Failed to end USB2 unknown calibration\n");
+ return ret;
+ }
+
+ /* Wait for PLL to be locked */
+ ret = readl_poll_timeout(utmi->regs + USB2_PHY_PLL_CTRL_REG0, reg,
+ reg & PLL_READY,
+ PLL_LOCK_DELAY_US, PLL_LOCK_TIMEOUT_US);
+ if (ret)
+ dev_err(dev, "Failed to lock USB2 PLL\n");
+
+ return ret;
+}
+
+static int mvebu_a3700_utmi_phy_power_off(struct phy *phy)
+{
+ struct mvebu_a3700_utmi *utmi = phy_get_drvdata(phy);
+ int usb32 = utmi->caps->usb32;
+ u32 reg;
+
+ /* Disable PHY pull-up and enable USB2 suspend */
+ reg = readl(utmi->regs + USB2_PHY_CTRL(usb32));
+ reg &= ~(RB_USB2PHY_PU | RB_USB2PHY_SUSPM(usb32));
+ writel(reg, utmi->regs + USB2_PHY_CTRL(usb32));
+
+ /* Power down OTG module */
+ if (usb32) {
+ reg = readl(utmi->regs + USB2_PHY_OTG_CTRL);
+ reg &= ~PHY_PU_OTG;
+ writel(reg, utmi->regs + USB2_PHY_OTG_CTRL);
+ }
+
+ return 0;
+}
+
+static const struct phy_ops mvebu_a3700_utmi_phy_ops = {
+ .power_on = mvebu_a3700_utmi_phy_power_on,
+ .power_off = mvebu_a3700_utmi_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_otg_phy_caps = {
+ .usb32 = true,
+ .ops = &mvebu_a3700_utmi_phy_ops,
+};
+
+static const struct mvebu_a3700_utmi_caps mvebu_a3700_utmi_host_phy_caps = {
+ .usb32 = false,
+ .ops = &mvebu_a3700_utmi_phy_ops,
+};
+
+static const struct of_device_id mvebu_a3700_utmi_of_match[] = {
+ {
+ .compatible = "marvell,a3700-utmi-otg-phy",
+ .data = &mvebu_a3700_utmi_otg_phy_caps,
+ },
+ {
+ .compatible = "marvell,a3700-utmi-host-phy",
+ .data = &mvebu_a3700_utmi_host_phy_caps,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mvebu_a3700_utmi_of_match);
+
+static int mvebu_a3700_utmi_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mvebu_a3700_utmi *utmi;
+ struct phy_provider *provider;
+ struct resource *res;
+
+ utmi = devm_kzalloc(dev, sizeof(*utmi), GFP_KERNEL);
+ if (!utmi)
+ return -ENOMEM;
+
+ /* Get UTMI memory region */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "Missing UTMI PHY memory resource\n");
+ return -ENODEV;
+ }
+
+ utmi->regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(utmi->regs))
+ return PTR_ERR(utmi->regs);
+
+ /* Get miscellaneous Host/PHY region */
+ utmi->usb_misc = syscon_regmap_lookup_by_phandle(dev->of_node,
+ "marvell,usb-misc-reg");
+ if (IS_ERR(utmi->usb_misc)) {
+ dev_err(dev,
+ "Missing USB misc purpose system controller\n");
+ return PTR_ERR(utmi->usb_misc);
+ }
+
+ /* Retrieve PHY capabilities */
+ utmi->caps = of_device_get_match_data(dev);
+
+ /* Instantiate the PHY */
+ utmi->phy = devm_phy_create(dev, NULL, utmi->caps->ops);
+ if (IS_ERR(utmi->phy)) {
+ dev_err(dev, "Failed to create the UTMI PHY\n");
+ return PTR_ERR(utmi->phy);
+ }
+
+ phy_set_drvdata(utmi->phy, utmi);
+
+ /* Ensure the PHY is powered off */
+ utmi->caps->ops->power_off(utmi->phy);
+
+ provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(provider);
+}
+
+static struct platform_driver mvebu_a3700_utmi_driver = {
+ .probe = mvebu_a3700_utmi_phy_probe,
+ .driver = {
+ .name = "mvebu-a3700-utmi-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = mvebu_a3700_utmi_of_match,
+ },
+};
+module_platform_driver(mvebu_a3700_utmi_driver);
+
+MODULE_AUTHOR("Igal Liberman <igall@marvell.com>");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Marvell EBU A3700 UTMI PHY driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
index 187cccde53b5..d98e0451f6a1 100644
--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
@@ -580,8 +580,6 @@ static struct phy *mvebu_comphy_xlate(struct device *dev,
return phy;
lane = phy_get_drvdata(phy);
- if (lane->port >= 0)
- return ERR_PTR(-EBUSY);
lane->port = args->args[0];
return phy;
diff --git a/drivers/phy/marvell/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c
index 768ce92e81ce..369fece2be7a 100644
--- a/drivers/phy/marvell/phy-mvebu-sata.c
+++ b/drivers/phy/marvell/phy-mvebu-sata.c
@@ -10,7 +10,7 @@
*/
#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/clk.h>
#include <linux/phy/phy.h>
#include <linux/io.h>
@@ -122,7 +122,6 @@ static const struct of_device_id phy_mvebu_sata_of_match[] = {
{ .compatible = "marvell,mvebu-sata-phy" },
{ },
};
-MODULE_DEVICE_TABLE(of, phy_mvebu_sata_of_match);
static struct platform_driver phy_mvebu_sata_driver = {
.probe = phy_mvebu_sata_probe,
@@ -131,8 +130,4 @@ static struct platform_driver phy_mvebu_sata_driver = {
.of_match_table = phy_mvebu_sata_of_match,
}
};
-module_platform_driver(phy_mvebu_sata_driver);
-
-MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
-MODULE_DESCRIPTION("Marvell MVEBU SATA PHY driver");
-MODULE_LICENSE("GPL v2");
+builtin_platform_driver(phy_mvebu_sata_driver);
diff --git a/drivers/phy/phy-core-mipi-dphy.c b/drivers/phy/phy-core-mipi-dphy.c
index 465fa1b91a5f..14e0551cd319 100644
--- a/drivers/phy/phy-core-mipi-dphy.c
+++ b/drivers/phy/phy-core-mipi-dphy.c
@@ -65,12 +65,12 @@ int phy_mipi_dphy_get_default_config(unsigned long pixel_clock,
*/
cfg->hs_trail = max(4 * 8 * ui, 60000 + 4 * 4 * ui);
- cfg->init = 100000000;
+ cfg->init = 100;
cfg->lpx = 60000;
cfg->ta_get = 5 * cfg->lpx;
cfg->ta_go = 4 * cfg->lpx;
cfg->ta_sure = 2 * cfg->lpx;
- cfg->wakeup = 1000000000;
+ cfg->wakeup = 1000;
cfg->hs_clk_rate = hs_clk_rate;
cfg->lanes = lanes;
@@ -143,7 +143,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
if (cfg->hs_trail < max(8 * ui, 60000 + 4 * ui))
return -EINVAL;
- if (cfg->init < 100000000)
+ if (cfg->init < 100)
return -EINVAL;
if (cfg->lpx < 50000)
@@ -158,7 +158,7 @@ int phy_mipi_dphy_config_validate(struct phy_configure_opts_mipi_dphy *cfg)
if (cfg->ta_sure < cfg->lpx || cfg->ta_sure > (2 * cfg->lpx))
return -EINVAL;
- if (cfg->wakeup < 1000000000)
+ if (cfg->wakeup < 1000)
return -EINVAL;
return 0;
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index 19b05e824ee4..cb38f6e8614c 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -1112,14 +1112,4 @@ static int __init phy_core_init(void)
return 0;
}
-module_init(phy_core_init);
-
-static void __exit phy_core_exit(void)
-{
- class_destroy(phy_class);
-}
-module_exit(phy_core_exit);
-
-MODULE_DESCRIPTION("Generic PHY Framework");
-MODULE_AUTHOR("Kishon Vijay Abraham I <kishon@ti.com>");
-MODULE_LICENSE("GPL v2");
+device_initcall(phy_core_init);
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index b4006818e1b6..08d6f6f7f039 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -687,6 +687,116 @@ static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
};
+static const struct qmp_phy_init_tbl msm8998_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BIAS_EN_CLKBUFLR_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xc9),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORECLK_DIV_MODE0, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_INITVAL, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_MODE, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE1, 0x85),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_HIGHZ_DRVR_EN, 0x10),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX, 0x00),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x18),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x43),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x75),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_ENABLES, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_VGA_CAL_CNTRL2, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_MODE_00, 0x05),
+};
+
+static const struct qmp_phy_init_tbl msm8998_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V0, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V1, 0x9f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V2, 0xb7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V3, 0x4e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_V4, 0x65),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXMGN_LS, 0x6b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TX_LARGE_AMP_DRV_LVL, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V1, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V2, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V2, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V3, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V3, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V4, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V4, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_LS, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_LS, 0x0d),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RATE_SLEW_CNTRL, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x8a),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+};
+
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -1036,6 +1146,33 @@ static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
.no_pcs_sw_reset = true,
};
+static const struct qmp_phy_cfg msm8998_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = msm8998_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(msm8998_usb3_serdes_tbl),
+ .tx_tbl = msm8998_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8998_usb3_tx_tbl),
+ .rx_tbl = msm8998_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(msm8998_usb3_rx_tbl),
+ .pcs_tbl = msm8998_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(msm8998_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+ .mask_pcs_ready = PHYSTATUS,
+
+ .is_dual_lane_phy = true,
+};
+
static void qcom_qmp_phy_configure(void __iomem *base,
const unsigned int *regs,
const struct qmp_phy_init_tbl tbl[],
@@ -1736,6 +1873,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
.compatible = "qcom,msm8996-qmp-usb3-phy",
.data = &msm8996_usb3phy_cfg,
}, {
+ .compatible = "qcom,msm8998-qmp-ufs-phy",
+ .data = &sdm845_ufsphy_cfg,
+ }, {
.compatible = "qcom,ipq8074-qmp-pcie-phy",
.data = &ipq8074_pciephy_cfg,
}, {
@@ -1747,6 +1887,9 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sdm845-qmp-ufs-phy",
.data = &sdm845_ufsphy_cfg,
+ }, {
+ .compatible = "qcom,msm8998-qmp-usb3-phy",
+ .data = &msm8998_usb3phy_cfg,
},
{ },
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index d201cc307151..a1b6cdee9a08 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -174,6 +174,7 @@
#define QSERDES_V3_COM_DIV_FRAC_START1_MODE1 0x0c4
#define QSERDES_V3_COM_DIV_FRAC_START2_MODE1 0x0c8
#define QSERDES_V3_COM_DIV_FRAC_START3_MODE1 0x0cc
+#define QSERDES_V3_COM_INTEGLOOP_INITVAL 0x0d0
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0 0x0d8
#define QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0 0x0dc
#define QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1 0x0e0
@@ -201,6 +202,7 @@
#define QSERDES_V3_COM_DEBUG_BUS2 0x170
#define QSERDES_V3_COM_DEBUG_BUS3 0x174
#define QSERDES_V3_COM_DEBUG_BUS_SEL 0x178
+#define QSERDES_V3_COM_CMN_MODE 0x184
/* Only for QMP V3 PHY - TX registers */
#define QSERDES_V3_TX_RES_CODE_LANE_OFFSET_TX 0x044
@@ -211,6 +213,7 @@
#define QSERDES_V3_TX_RCV_DETECT_LVL_2 0x0a4
/* Only for QMP V3 PHY - RX registers */
+#define QSERDES_V3_RX_UCDR_FO_GAIN 0x008
#define QSERDES_V3_RX_UCDR_SO_GAIN_HALF 0x00c
#define QSERDES_V3_RX_UCDR_SO_GAIN 0x014
#define QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF 0x024
@@ -219,6 +222,7 @@
#define QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN 0x030
#define QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE 0x034
#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW 0x03c
+#define QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_HIGH 0x040
#define QSERDES_V3_RX_UCDR_PI_CONTROLS 0x044
#define QSERDES_V3_RX_RX_TERM_BW 0x07c
#define QSERDES_V3_RX_VGA_CAL_CNTRL1 0x0bc
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 9177989f22d1..8fd7ce139772 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -152,6 +152,31 @@ static const struct qusb2_phy_init_tbl msm8996_init_tbl[] = {
QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_PWR_CTRL, 0x00),
};
+static const unsigned int msm8998_regs_layout[] = {
+ [QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
+ [QUSB2PHY_PLL_STATUS] = 0x1a0,
+ [QUSB2PHY_PORT_TUNE1] = 0x23c,
+ [QUSB2PHY_PORT_TUNE2] = 0x240,
+ [QUSB2PHY_PORT_TUNE3] = 0x244,
+ [QUSB2PHY_PORT_TUNE4] = 0x248,
+ [QUSB2PHY_PORT_TEST1] = 0x24c,
+ [QUSB2PHY_PORT_TEST2] = 0x250,
+ [QUSB2PHY_PORT_POWERDOWN] = 0x210,
+ [QUSB2PHY_INTR_CTRL] = 0x22c,
+};
+
+static const struct qusb2_phy_init_tbl msm8998_init_tbl[] = {
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_ANALOG_CONTROLS_TWO, 0x13),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CLOCK_INVERTERS, 0x7c),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_CMODE, 0x80),
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_LOCK_DELAY, 0x0a),
+
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE1, 0xa5),
+ QUSB2_PHY_INIT_CFG_L(QUSB2PHY_PORT_TUNE2, 0x09),
+
+ QUSB2_PHY_INIT_CFG(QUSB2PHY_PLL_DIGITAL_TIMERS_TWO, 0x19),
+};
+
static const unsigned int sdm845_regs_layout[] = {
[QUSB2PHY_PLL_CORE_INPUT_OVERRIDE] = 0xa8,
[QUSB2PHY_PLL_STATUS] = 0x1a0,
@@ -221,6 +246,18 @@ static const struct qusb2_phy_cfg msm8996_phy_cfg = {
.autoresume_en = BIT(3),
};
+static const struct qusb2_phy_cfg msm8998_phy_cfg = {
+ .tbl = msm8998_init_tbl,
+ .tbl_num = ARRAY_SIZE(msm8998_init_tbl),
+ .regs = msm8998_regs_layout,
+
+ .disable_ctrl = POWER_DOWN,
+ .mask_core_ready = CORE_READY_STATUS,
+ .has_pll_override = true,
+ .autoresume_en = BIT(0),
+ .update_tune1_with_efuse = true,
+};
+
static const struct qusb2_phy_cfg sdm845_phy_cfg = {
.tbl = sdm845_init_tbl,
.tbl_num = ARRAY_SIZE(sdm845_init_tbl),
@@ -734,6 +771,9 @@ static const struct of_device_id qusb2_phy_of_match_table[] = {
.compatible = "qcom,msm8996-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
+ .compatible = "qcom,msm8998-qusb2-phy",
+ .data = &msm8998_phy_cfg,
+ }, {
.compatible = "qcom,sdm845-qusb2-phy",
.data = &sdm845_phy_cfg,
},
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 681644e43248..f798fb64de94 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -23,24 +23,7 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/delay.h>
-
-#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
-({ \
- ktime_t timeout = ktime_add_us(ktime_get(), timeout_us); \
- might_sleep_if(timeout_us); \
- for (;;) { \
- (val) = readl(addr); \
- if (cond) \
- break; \
- if (timeout_us && ktime_compare(ktime_get(), timeout) > 0) { \
- (val) = readl(addr); \
- break; \
- } \
- if (sleep_us) \
- usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
- } \
- (cond) ? 0 : -ETIMEDOUT; \
-})
+#include <linux/iopoll.h>
#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
{ \
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 91fba60267a0..ba07121c3eff 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -55,16 +55,16 @@ enum rockchip_usb2phy_host_state {
};
/**
- * Different states involved in USB charger detection.
- * USB_CHG_STATE_UNDEFINED USB charger is not connected or detection
+ * enum usb_chg_state - Different states involved in USB charger detection.
+ * @USB_CHG_STATE_UNDEFINED: USB charger is not connected or detection
* process is not yet started.
- * USB_CHG_STATE_WAIT_FOR_DCD Waiting for Data pins contact.
- * USB_CHG_STATE_DCD_DONE Data pin contact is detected.
- * USB_CHG_STATE_PRIMARY_DONE Primary detection is completed (Detects
+ * @USB_CHG_STATE_WAIT_FOR_DCD: Waiting for Data pins contact.
+ * @USB_CHG_STATE_DCD_DONE: Data pin contact is detected.
+ * @USB_CHG_STATE_PRIMARY_DONE: Primary detection is completed (Detects
* between SDP and DCP/CDP).
- * USB_CHG_STATE_SECONDARY_DONE Secondary detection is completed (Detects
- * between DCP and CDP).
- * USB_CHG_STATE_DETECTED USB charger type is determined.
+ * @USB_CHG_STATE_SECONDARY_DONE: Secondary detection is completed (Detects
+ * between DCP and CDP).
+ * @USB_CHG_STATE_DETECTED: USB charger type is determined.
*/
enum usb_chg_state {
USB_CHG_STATE_UNDEFINED = 0,
@@ -94,7 +94,7 @@ struct usb2phy_reg {
};
/**
- * struct rockchip_chg_det_reg: usb charger detect registers
+ * struct rockchip_chg_det_reg - usb charger detect registers
* @cp_det: charging port detected successfully.
* @dcp_det: dedicated charging port detected successfully.
* @dp_det: assert data pin connect successfully.
@@ -120,7 +120,7 @@ struct rockchip_chg_det_reg {
};
/**
- * struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
+ * struct rockchip_usb2phy_port_cfg - usb-phy port configuration.
* @phy_sus: phy suspend register.
* @bvalid_det_en: vbus valid rise detection enable register.
* @bvalid_det_st: vbus valid rise detection status register.
@@ -148,10 +148,11 @@ struct rockchip_usb2phy_port_cfg {
};
/**
- * struct rockchip_usb2phy_cfg: usb-phy configuration.
+ * struct rockchip_usb2phy_cfg - usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
+ * @port_cfgs: usb-phy port configurations.
* @chg_det: charger detection registers.
*/
struct rockchip_usb2phy_cfg {
@@ -163,12 +164,10 @@ struct rockchip_usb2phy_cfg {
};
/**
- * struct rockchip_usb2phy_port: usb-phy port data.
+ * struct rockchip_usb2phy_port - usb-phy port data.
+ * @phy: generic phy.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
- * @utmi_avalid: utmi avalid status usage flag.
- * true - use avalid to get vbus status
- * flase - use bvalid to get vbus status
* @vbus_attached: otg device vbus status.
* @bvalid_irq: IRQ number assigned for vbus valid rise detection.
* @ls_irq: IRQ number assigned for linestate detection.
@@ -178,7 +177,7 @@ struct rockchip_usb2phy_cfg {
* @chg_work: charge detect work.
* @otg_sm_work: OTG state machine work.
* @sm_work: HOST state machine work.
- * @phy_cfg: port register configuration, assigned by driver data.
+ * @port_cfg: port register configuration, assigned by driver data.
* @event_nb: hold event notification callback.
* @state: define OTG enumeration states before device reset.
* @mode: the dr_mode of the controller.
@@ -187,7 +186,6 @@ struct rockchip_usb2phy_port {
struct phy *phy;
unsigned int port_id;
bool suspended;
- bool utmi_avalid;
bool vbus_attached;
int bvalid_irq;
int ls_irq;
@@ -203,12 +201,13 @@ struct rockchip_usb2phy_port {
};
/**
- * struct rockchip_usb2phy: usb2.0 phy driver data.
+ * struct rockchip_usb2phy - usb2.0 phy driver data.
+ * @dev: pointer to device.
* @grf: General Register Files regmap.
* @usbgrf: USB General Register Files regmap.
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
- * @clk_hw: clock struct of phy output clk management.
+ * @clk480m_hw: clock struct of phy output clk management.
* @chg_state: states involved in USB charger detection.
* @chg_type: USB charger types.
* @dcd_retries: The retry count used to track Data contact
@@ -542,12 +541,8 @@ static void rockchip_usb2phy_otg_sm_work(struct work_struct *work)
unsigned long delay;
bool vbus_attach, sch_work, notify_charger;
- if (rport->utmi_avalid)
- vbus_attach = property_enabled(rphy->grf,
- &rport->port_cfg->utmi_avalid);
- else
- vbus_attach = property_enabled(rphy->grf,
- &rport->port_cfg->utmi_bvalid);
+ vbus_attach = property_enabled(rphy->grf,
+ &rport->port_cfg->utmi_bvalid);
sch_work = false;
notify_charger = false;
@@ -1021,9 +1016,6 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
INIT_DELAYED_WORK(&rport->chg_work, rockchip_chg_detect_work);
INIT_DELAYED_WORK(&rport->otg_sm_work, rockchip_usb2phy_otg_sm_work);
- rport->utmi_avalid =
- of_property_read_bool(child_np, "rockchip,utmi-avalid");
-
/*
* Some SoCs use one interrupt with otg-id/otg-bvalid/linestate
* interrupts muxed together, so probe the otg-mux interrupt first,
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index c4709ed7fb0e..103efc456a12 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -33,12 +33,11 @@ config OMAP_CONTROL_PHY
config OMAP_USB2
tristate "OMAP USB2 PHY Driver"
- depends on ARCH_OMAP2PLUS
+ depends on ARCH_OMAP2PLUS || ARCH_K3
depends on USB_SUPPORT
select GENERIC_PHY
select USB_PHY
- select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
+ select OMAP_CONTROL_PHY if ARCH_OMAP2PLUS
help
Enable this to support the transceiver that is part of SOC. This
driver takes care of all the PHY functionality apart from comparator.
@@ -50,7 +49,6 @@ config TI_PIPE3
depends on ARCH_OMAP2PLUS || COMPILE_TEST
select GENERIC_PHY
select OMAP_CONTROL_PHY
- depends on OMAP_OCP2SCP
help
Enable this to support the PIPE3 PHY that is part of TI SOCs. This
driver takes care of all the PHY functionality apart from comparator.
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index fe909fd8144f..e871f2983a0e 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -36,6 +36,10 @@
#define USB2PHY_DISCON_BYP_LATCH (1 << 31)
#define USB2PHY_ANA_CONFIG1 0x4c
+#define AM654_USB2_OTG_PD BIT(8)
+#define AM654_USB2_VBUS_DET_EN BIT(5)
+#define AM654_USB2_VBUSVALID_DET_EN BIT(4)
+
/**
* omap_usb2_set_comparator - links the comparator present in the sytem with
* this phy
@@ -135,9 +139,9 @@ static int omap_usb_power_on(struct phy *x)
static int omap_usb2_disable_clocks(struct omap_usb *phy)
{
- clk_disable(phy->wkupclk);
+ clk_disable_unprepare(phy->wkupclk);
if (!IS_ERR(phy->optclk))
- clk_disable(phy->optclk);
+ clk_disable_unprepare(phy->optclk);
return 0;
}
@@ -146,14 +150,14 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
{
int ret;
- ret = clk_enable(phy->wkupclk);
+ ret = clk_prepare_enable(phy->wkupclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err0;
}
if (!IS_ERR(phy->optclk)) {
- ret = clk_enable(phy->optclk);
+ ret = clk_prepare_enable(phy->optclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
goto err1;
@@ -245,6 +249,15 @@ static const struct usb_phy_data am437x_usb2_data = {
.power_off = AM437X_USB2_PHY_PD | AM437X_USB2_OTG_PD,
};
+static const struct usb_phy_data am654_usb2_data = {
+ .label = "am654_usb2",
+ .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT,
+ .mask = AM654_USB2_OTG_PD | AM654_USB2_VBUS_DET_EN |
+ AM654_USB2_VBUSVALID_DET_EN,
+ .power_on = AM654_USB2_VBUS_DET_EN | AM654_USB2_VBUSVALID_DET_EN,
+ .power_off = AM654_USB2_OTG_PD,
+};
+
static const struct of_device_id omap_usb2_id_table[] = {
{
.compatible = "ti,omap-usb2",
@@ -266,6 +279,10 @@ static const struct of_device_id omap_usb2_id_table[] = {
.compatible = "ti,am437x-usb2",
.data = &am437x_usb2_data,
},
+ {
+ .compatible = "ti,am654-usb2",
+ .data = &am654_usb2_data,
+ },
{},
};
MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
@@ -346,63 +363,72 @@ static int omap_usb2_probe(struct platform_device *pdev)
}
}
- otg->set_host = omap_usb_set_host;
- otg->set_peripheral = omap_usb_set_peripheral;
- if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
- otg->set_vbus = omap_usb_set_vbus;
- if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
- otg->start_srp = omap_usb_start_srp;
- otg->usb_phy = &phy->phy;
-
- platform_set_drvdata(pdev, phy);
- pm_runtime_enable(phy->dev);
-
- generic_phy = devm_phy_create(phy->dev, NULL, &ops);
- if (IS_ERR(generic_phy)) {
- pm_runtime_disable(phy->dev);
- return PTR_ERR(generic_phy);
- }
-
- phy_set_drvdata(generic_phy, phy);
- omap_usb_power_off(generic_phy);
-
- phy_provider = devm_of_phy_provider_register(phy->dev,
- of_phy_simple_xlate);
- if (IS_ERR(phy_provider)) {
- pm_runtime_disable(phy->dev);
- return PTR_ERR(phy_provider);
- }
phy->wkupclk = devm_clk_get(phy->dev, "wkupclk");
if (IS_ERR(phy->wkupclk)) {
- dev_warn(&pdev->dev, "unable to get wkupclk, trying old name\n");
+ if (PTR_ERR(phy->wkupclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
+ dev_warn(&pdev->dev, "unable to get wkupclk %ld, trying old name\n",
+ PTR_ERR(phy->wkupclk));
phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k");
+
if (IS_ERR(phy->wkupclk)) {
- dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
- pm_runtime_disable(phy->dev);
+ if (PTR_ERR(phy->wkupclk) != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n");
return PTR_ERR(phy->wkupclk);
} else {
dev_warn(&pdev->dev,
"found usb_phy_cm_clk32k, please fix DTS\n");
}
}
- clk_prepare(phy->wkupclk);
phy->optclk = devm_clk_get(phy->dev, "refclk");
if (IS_ERR(phy->optclk)) {
+ if (PTR_ERR(phy->optclk) == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+
dev_dbg(&pdev->dev, "unable to get refclk, trying old name\n");
phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m");
+
if (IS_ERR(phy->optclk)) {
- dev_dbg(&pdev->dev,
- "unable to get usb_otg_ss_refclk960m\n");
+ if (PTR_ERR(phy->optclk) != -EPROBE_DEFER) {
+ dev_dbg(&pdev->dev,
+ "unable to get usb_otg_ss_refclk960m\n");
+ }
} else {
dev_warn(&pdev->dev,
"found usb_otg_ss_refclk960m, please fix DTS\n");
}
}
- if (!IS_ERR(phy->optclk))
- clk_prepare(phy->optclk);
+ otg->set_host = omap_usb_set_host;
+ otg->set_peripheral = omap_usb_set_peripheral;
+ if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
+ otg->set_vbus = omap_usb_set_vbus;
+ if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
+ otg->start_srp = omap_usb_start_srp;
+ otg->usb_phy = &phy->phy;
+
+ platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
+
+ generic_phy = devm_phy_create(phy->dev, NULL, &ops);
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(generic_phy);
+ }
+
+ phy_set_drvdata(generic_phy, phy);
+ omap_usb_power_off(generic_phy);
+
+ phy_provider = devm_of_phy_provider_register(phy->dev,
+ of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ pm_runtime_disable(phy->dev);
+ return PTR_ERR(phy_provider);
+ }
+
usb_add_phy_dev(&phy->phy);
@@ -413,9 +439,6 @@ static int omap_usb2_remove(struct platform_device *pdev)
{
struct omap_usb *phy = platform_get_drvdata(pdev);
- clk_unprepare(phy->wkupclk);
- if (!IS_ERR(phy->optclk))
- clk_unprepare(phy->optclk);
usb_remove_phy(&phy->phy);
pm_runtime_disable(phy->dev);