Merge tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is a calm cycle, not much happened this time around: not even
  much incremental development. Some three new drivers, that is all.

  No core changes.

  New drivers:

   - NXP (ex Freescale) i.MX 8QM driver.

   - NXP (ex Freescale) i.MX 8MM driver.

   - AT91 SAM9X60 subdriver.

  Improvements:

   - Support for external interrups (EINT) on Mediatek virtual GPIOs.

   - Make BCM2835 pin config fully generic.

   - Lots of Renesas SH-PFC incremental improvements"

* tag 'pinctrl-v5.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (70 commits)
  pinctrl: imx: fix scu link errors
  dt-bindings: pinctrl: Document the i.MX50 IOMUXC binding
  pinctrl: qcom: spmi-gpio: Reorder debug print
  pinctrl: nomadik: fix possible object reference leak
  pinctrl: stm32: return error upon hwspinlock failure
  pinctrl: stm32: fix memory leak issue
  pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
  pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
  pinctrl: sh-pfc: Validate fixed-size field widths at build time
  pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
  pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
  pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
  pinctrl: sh-pfc: emev2: Add missing pinmux functions
  pinctrl: sunxi: Support I/O bias voltage setting on A80
  pinctrl: ingenic: Add LCD pins for the JZ4725B SoC
  pinctrl: samsung: Remove legacy API for handling external wakeup interrupts mask
  pinctrl: bcm2835: Direct GPIO config changes to generic pinctrl
  pinctrl: bcm2835: declare pin config as generic
  pinctrl: qcom: qcs404: Drop unused UFS_RESET macro
  dt-bindings: add documentation for slew rate
  ...

1 files changed, 41 insertions, 0 deletions

diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
index 0e7fa69e93df..8dd25caea2cf 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c
@@ -603,6 +603,45 @@ static const struct pinconf_ops sunxi_pconf_ops = {
 	.pin_config_group_set	= sunxi_pconf_group_set,
 };
 
+static int sunxi_pinctrl_set_io_bias_cfg(struct sunxi_pinctrl *pctl,
+					 unsigned pin,
+					 struct regulator *supply)
+{
+	u32 val, reg;
+	int uV;
+
+	if (!pctl->desc->has_io_bias_cfg)
+		return 0;
+
+	uV = regulator_get_voltage(supply);
+	if (uV < 0)
+		return uV;
+
+	/* Might be dummy regulator with no voltage set */
+	if (uV == 0)
+		return 0;
+
+	/* Configured value must be equal or greater to actual voltage */
+	if (uV <= 1800000)
+		val = 0x0; /* 1.8V */
+	else if (uV <= 2500000)
+		val = 0x6; /* 2.5V */
+	else if (uV <= 2800000)
+		val = 0x9; /* 2.8V */
+	else if (uV <= 3000000)
+		val = 0xA; /* 3.0V */
+	else
+		val = 0xD; /* 3.3V */
+
+	pin -= pctl->desc->pin_base;
+
+	reg = readl(pctl->membase + sunxi_grp_config_reg(pin));
+	reg &= ~IO_BIAS_MASK;
+	writel(reg | val, pctl->membase + sunxi_grp_config_reg(pin));
+
+	return 0;
+}
+
 static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev)
 {
 	struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
@@ -725,6 +764,8 @@ static int sunxi_pmx_request(struct pinctrl_dev *pctldev, unsigned offset)
 		goto out;
 	}
 
+	sunxi_pinctrl_set_io_bias_cfg(pctl, offset, reg);
+
 	s_reg->regulator = reg;
 	refcount_set(&s_reg->refcount, 1);