Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge the 4.8 pull request state from Dave - conflicts were
getting out of hand, and Chris has some patches which outright don't
apply without everything merged together again.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

4 files changed, 98 insertions, 56 deletions

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index c06bb85c2839..3ec0025d19e7 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -103,7 +103,6 @@ config DELL_SMBIOS
 
 config DELL_LAPTOP
 	tristate "Dell Laptop Extras"
-	depends on X86
 	depends on DELL_SMBIOS
 	depends on DMI
 	depends on BACKLIGHT_CLASS_DEVICE
@@ -505,7 +504,7 @@ config THINKPAD_ACPI_HOTKEY_POLL
 
 config SENSORS_HDAPS
 	tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
-	depends on INPUT && X86
+	depends on INPUT
 	select INPUT_POLLDEV
 	default n
 	help
@@ -749,7 +748,7 @@ config TOSHIBA_WMI
 
 config ACPI_CMPC
 	tristate "CMPC Laptop Extras"
-	depends on X86 && ACPI
+	depends on ACPI
 	depends on RFKILL || RFKILL=n
 	select INPUT
 	select BACKLIGHT_CLASS_DEVICE
@@ -848,7 +847,7 @@ config INTEL_IMR
 
 config INTEL_PMC_CORE
 	bool "Intel PMC Core driver"
-	depends on X86 && PCI
+	depends on PCI
 	---help---
 	  The Intel Platform Controller Hub for Intel Core SoCs provides access
 	  to Power Management Controller registers via a PCI interface. This
@@ -860,7 +859,7 @@ config INTEL_PMC_CORE
 
 config IBM_RTL
 	tristate "Device driver to enable PRTL support"
-	depends on X86 && PCI
+	depends on PCI
 	---help---
 	 Enable support for IBM Premium Real Time Mode (PRTM).
 	 This module will allow you the enter and exit PRTM in the BIOS via
@@ -894,7 +893,6 @@ config XO15_EBOOK
 
 config SAMSUNG_LAPTOP
 	tristate "Samsung Laptop driver"
-	depends on X86
 	depends on RFKILL || RFKILL = n
 	depends on ACPI_VIDEO || ACPI_VIDEO = n
 	depends on BACKLIGHT_CLASS_DEVICE
diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c
index 4034d2d4c507..a66be137324c 100644
--- a/drivers/platform/x86/apple-gmux.c
+++ b/drivers/platform/x86/apple-gmux.c
@@ -31,19 +31,21 @@
 /**
  * DOC: Overview
  *
- * :1:  http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx
- * :2:  http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp
- *
  * gmux is a microcontroller built into the MacBook Pro to support dual GPUs:
- * A {1}[Lattice XP2] on pre-retinas, a {2}[Renesas R4F2113] on retinas.
+ * A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on retinas.
  *
  * (The MacPro6,1 2013 also has a gmux, however it is unclear why since it has
  * dual GPUs but no built-in display.)
  *
  * gmux is connected to the LPC bus of the southbridge. Its I/O ports are
  * accessed differently depending on the microcontroller: Driver functions
- * to access a pre-retina gmux are infixed `_pio_`, those for a retina gmux
- * are infixed `_index_`.
+ * to access a pre-retina gmux are infixed ``_pio_``, those for a retina gmux
+ * are infixed ``_index_``.
+ *
+ * .. _Lattice XP2:
+ *     http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx
+ * .. _Renesas R4F2113:
+ *     http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp
  */
 
 struct apple_gmux_data {
@@ -272,15 +274,15 @@ static bool gmux_is_indexed(struct apple_gmux_data *gmux_data)
 /**
  * DOC: Backlight control
  *
- * :3:  http://www.ti.com/lit/ds/symlink/lp8543.pdf
- * :4:  http://www.ti.com/lit/ds/symlink/lp8545.pdf
- *
  * On single GPU MacBooks, the PWM signal for the backlight is generated by
  * the GPU. On dual GPU MacBook Pros by contrast, either GPU may be suspended
  * to conserve energy. Hence the PWM signal needs to be generated by a separate
  * backlight driver which is controlled by gmux. The earliest generation
- * MBP5 2008/09 uses a {3}[TI LP8543] backlight driver. All newer models
- * use a {4}[TI LP8545].
+ * MBP5 2008/09 uses a `TI LP8543`_ backlight driver. All newer models
+ * use a `TI LP8545`_.
+ *
+ * .. _TI LP8543: http://www.ti.com/lit/ds/symlink/lp8543.pdf
+ * .. _TI LP8545: http://www.ti.com/lit/ds/symlink/lp8545.pdf
  */
 
 static int gmux_get_brightness(struct backlight_device *bd)
@@ -312,28 +314,20 @@ static const struct backlight_ops gmux_bl_ops = {
 /**
  * DOC: Graphics mux
  *
- * :5:  http://pimg-fpiw.uspto.gov/fdd/07/870/086/0.pdf
- * :6:  http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
- * :7:  http://www.ti.com/lit/ds/symlink/hd3ss212.pdf
- * :8:  https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf
- * :9:  http://www.ti.com/lit/ds/symlink/sn74lv4066a.pdf
- * :10: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-SW16/DSASW00308511.pdf
- * :11: http://www.ti.com/lit/ds/symlink/ts3ds10224.pdf
- *
  * On pre-retinas, the LVDS outputs of both GPUs feed into gmux which muxes
  * either of them to the panel. One of the tricks gmux has up its sleeve is
  * to lengthen the blanking interval of its output during a switch to
  * synchronize it with the GPU switched to. This allows for a flicker-free
- * switch that is imperceptible by the user ({5}[US 8,687,007 B2]).
+ * switch that is imperceptible by the user (`US 8,687,007 B2`_).
  *
  * On retinas, muxing is no longer done by gmux itself, but by a separate
  * chip which is controlled by gmux. The chip is triple sourced, it is
- * either an {6}[NXP CBTL06142], {7}[TI HD3SS212] or {8}[Pericom PI3VDP12412].
+ * either an `NXP CBTL06142`_, `TI HD3SS212`_ or `Pericom PI3VDP12412`_.
  * The panel is driven with eDP instead of LVDS since the pixel clock
  * required for retina resolution exceeds LVDS' limits.
  *
  * Pre-retinas are able to switch the panel's DDC pins separately.
- * This is handled by a {9}[TI SN74LV4066A] which is controlled by gmux.
+ * This is handled by a `TI SN74LV4066A`_ which is controlled by gmux.
  * The inactive GPU can thus probe the panel's EDID without switching over
  * the entire panel. Retinas lack this functionality as the chips used for
  * eDP muxing are incapable of switching the AUX channel separately (see
@@ -344,15 +338,15 @@ static const struct backlight_ops gmux_bl_ops = {
  *
  * The external DP port is only fully switchable on the first two unibody
  * MacBook Pro generations, MBP5 2008/09 and MBP6 2010. This is done by an
- * {6}[NXP CBTL06141] which is controlled by gmux. It's the predecessor of the
+ * `NXP CBTL06141`_ which is controlled by gmux. It's the predecessor of the
  * eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s.
  *
  * The following MacBook Pro generations replaced the external DP port with a
  * combined DP/Thunderbolt port and lost the ability to switch it between GPUs,
  * connecting it either to the discrete GPU or the Thunderbolt controller.
  * Oddly enough, while the full port is no longer switchable, AUX and HPD
- * are still switchable by way of an {10}[NXP CBTL03062] (on pre-retinas
- * MBP8 2011 and MBP9 2012) or two {11}[TI TS3DS10224] (on retinas) under the
+ * are still switchable by way of an `NXP CBTL03062`_ (on pre-retinas
+ * MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on retinas) under the
  * control of gmux. Since the integrated GPU is missing the main link,
  * external displays appear to it as phantoms which fail to link-train.
  *
@@ -365,10 +359,19 @@ static const struct backlight_ops gmux_bl_ops = {
  * of this feature.
  *
  * gmux' initial switch state on bootup is user configurable via the EFI
- * variable `gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9` (5th byte,
+ * variable ``gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9`` (5th byte,
  * 1 = IGD, 0 = DIS). Based on this setting, the EFI firmware tells gmux to
  * switch the panel and the external DP connector and allocates a framebuffer
  * for the selected GPU.
+ *
+ * .. _US 8,687,007 B2: http://pimg-fpiw.uspto.gov/fdd/07/870/086/0.pdf
+ * .. _NXP CBTL06141:   http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
+ * .. _NXP CBTL06142:   http://www.nxp.com/documents/data_sheet/CBTL06141.pdf
+ * .. _TI HD3SS212:     http://www.ti.com/lit/ds/symlink/hd3ss212.pdf
+ * .. _Pericom PI3VDP12412: https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf
+ * .. _TI SN74LV4066A:  http://www.ti.com/lit/ds/symlink/sn74lv4066a.pdf
+ * .. _NXP CBTL03062:   http://pdf.datasheetarchive.com/indexerfiles/Datasheets-SW16/DSASW00308511.pdf
+ * .. _TI TS3DS10224:   http://www.ti.com/lit/ds/symlink/ts3ds10224.pdf
  */
 
 static void gmux_read_switch_state(struct apple_gmux_data *gmux_data)
diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c
index 4a23fbc66b71..d1a091b93192 100644
--- a/drivers/platform/x86/ideapad-laptop.c
+++ b/drivers/platform/x86/ideapad-laptop.c
@@ -567,6 +567,7 @@ static void ideapad_sysfs_exit(struct ideapad_private *priv)
 static const struct key_entry ideapad_keymap[] = {
 	{ KE_KEY, 6,  { KEY_SWITCHVIDEOMODE } },
 	{ KE_KEY, 7,  { KEY_CAMERA } },
+	{ KE_KEY, 8,  { KEY_MICMUTE } },
 	{ KE_KEY, 11, { KEY_F16 } },
 	{ KE_KEY, 13, { KEY_WLAN } },
 	{ KE_KEY, 16, { KEY_PROG1 } },
@@ -809,6 +810,7 @@ static void ideapad_acpi_notify(acpi_handle handle, u32 event, void *data)
 				break;
 			case 13:
 			case 11:
+			case 8:
 			case 7:
 			case 6:
 				ideapad_input_report(priv, vpc_bit);
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index c3bfa1fe95bf..b65ce7519411 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -2043,6 +2043,7 @@ static int hotkey_autosleep_ack;
 
 static u32 hotkey_orig_mask;		/* events the BIOS had enabled */
 static u32 hotkey_all_mask;		/* all events supported in fw */
+static u32 hotkey_adaptive_all_mask;	/* all adaptive events supported in fw */
 static u32 hotkey_reserved_mask;	/* events better left disabled */
 static u32 hotkey_driver_mask;		/* events needed by the driver */
 static u32 hotkey_user_mask;		/* events visible to userspace */
@@ -2742,6 +2743,17 @@ static ssize_t hotkey_all_mask_show(struct device *dev,
 
 static DEVICE_ATTR_RO(hotkey_all_mask);
 
+/* sysfs hotkey all_mask ----------------------------------------------- */
+static ssize_t hotkey_adaptive_all_mask_show(struct device *dev,
+			   struct device_attribute *attr,
+			   char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "0x%08x\n",
+			hotkey_adaptive_all_mask | hotkey_source_mask);
+}
+
+static DEVICE_ATTR_RO(hotkey_adaptive_all_mask);
+
 /* sysfs hotkey recommended_mask --------------------------------------- */
 static ssize_t hotkey_recommended_mask_show(struct device *dev,
 					    struct device_attribute *attr,
@@ -2985,6 +2997,7 @@ static struct attribute *hotkey_attributes[] __initdata = {
 	&dev_attr_wakeup_hotunplug_complete.attr,
 	&dev_attr_hotkey_mask.attr,
 	&dev_attr_hotkey_all_mask.attr,
+	&dev_attr_hotkey_adaptive_all_mask.attr,
 	&dev_attr_hotkey_recommended_mask.attr,
 #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
 	&dev_attr_hotkey_source_mask.attr,
@@ -3321,20 +3334,6 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	if (!tp_features.hotkey)
 		return 1;
 
-	/*
-	 * Check if we have an adaptive keyboard, like on the
-	 * Lenovo Carbon X1 2014 (2nd Gen).
-	 */
-	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
-		if ((hkeyv >> 8) == 2) {
-			tp_features.has_adaptive_kbd = true;
-			res = sysfs_create_group(&tpacpi_pdev->dev.kobj,
-					&adaptive_kbd_attr_group);
-			if (res)
-				goto err_exit;
-		}
-	}
-
 	quirks = tpacpi_check_quirks(tpacpi_hotkey_qtable,
 				     ARRAY_SIZE(tpacpi_hotkey_qtable));
 
@@ -3357,30 +3356,70 @@ static int __init hotkey_init(struct ibm_init_struct *iibm)
 	   A30, R30, R31, T20-22, X20-21, X22-24.  Detected by checking
 	   for HKEY interface version 0x100 */
 	if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
-		if ((hkeyv >> 8) != 1) {
-			pr_err("unknown version of the HKEY interface: 0x%x\n",
-			       hkeyv);
-			pr_err("please report this to %s\n", TPACPI_MAIL);
-		} else {
+		vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
+			    "firmware HKEY interface version: 0x%x\n",
+			    hkeyv);
+
+		switch (hkeyv >> 8) {
+		case 1:
 			/*
 			 * MHKV 0x100 in A31, R40, R40e,
 			 * T4x, X31, and later
 			 */
-			vdbg_printk(TPACPI_DBG_INIT | TPACPI_DBG_HKEY,
-				"firmware HKEY interface version: 0x%x\n",
-				hkeyv);
 
 			/* Paranoia check AND init hotkey_all_mask */
 			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
 					"MHKA", "qd")) {
-				pr_err("missing MHKA handler, "
-				       "please report this to %s\n",
+				pr_err("missing MHKA handler, please report this to %s\n",
 				       TPACPI_MAIL);
 				/* Fallback: pre-init for FN+F3,F4,F12 */
 				hotkey_all_mask = 0x080cU;
 			} else {
 				tp_features.hotkey_mask = 1;
 			}
+			break;
+
+		case 2:
+			/*
+			 * MHKV 0x200 in X1, T460s, X260, T560, X1 Tablet (2016)
+			 */
+
+			/* Paranoia check AND init hotkey_all_mask */
+			if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+					"MHKA", "dd", 1)) {
+				pr_err("missing MHKA handler, please report this to %s\n",
+				       TPACPI_MAIL);
+				/* Fallback: pre-init for FN+F3,F4,F12 */
+				hotkey_all_mask = 0x080cU;
+			} else {
+				tp_features.hotkey_mask = 1;
+			}
+
+			/*
+			 * Check if we have an adaptive keyboard, like on the
+			 * Lenovo Carbon X1 2014 (2nd Gen).
+			 */
+			if (acpi_evalf(hkey_handle, &hotkey_adaptive_all_mask,
+				       "MHKA", "dd", 2)) {
+				if (hotkey_adaptive_all_mask != 0) {
+					tp_features.has_adaptive_kbd = true;
+					res = sysfs_create_group(
+						&tpacpi_pdev->dev.kobj,
+						&adaptive_kbd_attr_group);
+					if (res)
+						goto err_exit;
+				}
+			} else {
+				tp_features.has_adaptive_kbd = false;
+				hotkey_adaptive_all_mask = 0x0U;
+			}
+			break;
+
+		default:
+			pr_err("unknown version of the HKEY interface: 0x%x\n",
+			       hkeyv);
+			pr_err("please report this to %s\n", TPACPI_MAIL);
+			break;
 		}
 	}