Merge tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "Nothing special for the power-supply subystem this time.

   - power-supply core: remove faulty cooling logic

   - convert all sysfs show() handlers from *printf() use sysfs_emit()

   - bq25890: add dual-charger support required by Lenovo Yoga Tab 3 Pro

   - bq27xxx: fix reporting critical level

   - syscon-reboot: add priority property support

   - new rt9467 charger driver

   - new rt9471 charger driver

   - new Odroid Go Ultra poweroff driver

   - misc minor fixes and cleanups"

* tag 'for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (32 commits)
  power: reset: odroid-go-ultra: fix I2C dependency
  power: supply: leds: explicitly include linux/leds.h
  dt-bindings: power: supply: pm8941-coincell: Don't require charging properties
  dt-bindings: power: supply: pm8941-coincell: Add PM8998 compatible
  power: reset: add Odroid Go Ultra poweroff driver
  power: supply: rt9467: Fix spelling mistake "attache" -> "attach"
  power: supply: rt9471: fix using wrong ce_gpio in rt9471_probe()
  power: supply: max77650: Make max77650_charger_disable() return void
  Documentation: power: rt9467: Document exported sysfs entries
  power: supply: rt9467: Add Richtek RT9467 charger driver
  dt-bindings: power: supply: Add Richtek RT9467 battery charger
  Documentation: power: rt9471: Document exported sysfs entries
  power: supply: rt9471: Add Richtek RT9471 charger driver
  dt-bindings: power: supply: Add Richtek RT9471 battery charger
  power: supply: max1721x: Use strscpy() is more robust and safer
  power: supply: test-power: use strscpy() instead of strncpy()
  power: supply: bq27xxx: fix reporting critical level
  power: supply: bq256xx: Init ichg/vbat value with chip default value
  power: supply: collie_battery: Convert to GPIO descriptors (part 2)
  power: supply: remove faulty cooling logic
  ...

1 files changed, 35 insertions, 0 deletions

diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index e2f8dfcdd2a9..6a32f022943b 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -765,6 +765,41 @@ config CHARGER_RT9455
 	help
 	  Say Y to enable support for Richtek RT9455 battery charger.
 
+config CHARGER_RT9467
+	tristate "Richtek RT9467 Battery Charger Driver"
+	depends on I2C && GPIOLIB && REGULATOR
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select LINEAR_RANGES
+	help
+	  Say Y here to enable RT9467 Battery Charger.
+	  RT9467 is a switch-mode single cell Li-Ion/Li-Polymer battery charger
+	  for portable applications. It integrates a synchronous PWM controller,
+	  power MOSFETs, input current sensing and regulation, high-accuracy
+	  voltage regulation, and charge termination. The charge current is
+	  regulated through integrated sensing resistors. It also features
+	  USB On-The-Go (OTG) support and integrates D+/D- pin for USB
+	  host/charging port detection.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called "rt9467-charger".
+
+config CHARGER_RT9471
+	tristate "Richtek RT9471 battery charger driver"
+	depends on I2C && GPIOLIB && REGULATOR
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select LINEAR_RANGES
+	help
+	  This adds support for Richtek RT9471 battery charger. RT9471 is
+	  highly-integrated switch mode battery charger which is system power
+	  patch manageable device for single cell Li-Ion and Li-polymer battery.
+	  It can support BC12 detection on DPDM, and current and voltage
+	  regulation on both charging and boost mode.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called rt9471.
+
 config CHARGER_CROS_USBPD
 	tristate "ChromeOS EC based USBPD charger"
 	depends on CROS_USBPD_NOTIFY