diff options
author | Caleb Connolly <caleb.connolly@linaro.org> | 2023-05-26 22:44:15 +0100 |
---|---|---|
committer | Sebastian Reichel <sebastian.reichel@collabora.com> | 2023-06-09 01:20:14 +0200 |
commit | 8648aeb5d7b70e13264ff5f444f22081d37d4670 (patch) | |
tree | 4e47546f1873f03588dd9b01c55efd9559bc4a47 /drivers/power/supply/Kconfig | |
parent | 4a6598c49ab91837c218d640f95547edf0903434 (diff) |
power: supply: add Qualcomm PMI8998 SMB2 Charger driver
Add a driver for the SMB2 charger block found in the Qualcomm PMI8998
and PM660.
This driver is capable of utilising Qualcomm's Automatic Power Source
Detection (APSD) BC1.2 implementation, as well as Automatic Input
Current Limiting (AICL) to configure the maximum input current
limit of DCP (wall) chargers.
Quick Charge is not currently supported.
Most devices using the smb2 charger have a secondary dedicated charger
chip which is used in parallel to enable faster charger without
overheating. However, not all do, as a result to ensure safety until
these are supported, the maximum current is limited to ~1A via the
FAST_CHARGE_CURRENT_CFG register.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Tested-by: Joel Selvaraj <joelselvaraj.oss@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Diffstat (limited to 'drivers/power/supply/Kconfig')
-rw-r--r-- | drivers/power/supply/Kconfig | 9 |
1 files changed, 9 insertions, 0 deletions
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig index c78be9f322e6..e1828892332c 100644 --- a/drivers/power/supply/Kconfig +++ b/drivers/power/supply/Kconfig @@ -934,4 +934,13 @@ config BATTERY_UG3105 device is off or suspended, the functionality of this driver is limited to reporting capacity only. +config CHARGER_QCOM_SMB2 + tristate "Qualcomm PMI8998 PMIC charger driver" + depends on MFD_SPMI_PMIC + depends on IIO + help + Say Y here to enable the Qualcomm PMIC Charger driver. This + adds support for the SMB2 switch mode battery charger found + in PMI8998 and related PMICs. + endif # POWER_SUPPLY |