regulator: rpi-panel: Add regulator/backlight driver for RPi panel

This regulator/backlight driver handles the ATTINY88 present on the
RPi 7" touchscreen panel and exposes the power/backlight interfaces.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Mark Brown <broonie@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
To: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/r/20200809105938.6388-2-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 214 insertions, 0 deletions

diff --git a/drivers/regulator/rpi-panel-attiny-regulator.c b/drivers/regulator/rpi-panel-attiny-regulator.c
new file mode 100644
index 000000000000..ee46bfbf5eee
--- /dev/null
+++ b/drivers/regulator/rpi-panel-attiny-regulator.c
@@ -0,0 +1,214 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * Based on rpi_touchscreen.c by Eric Anholt <eric@anholt.net>
+ */
+
+#include <linux/backlight.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* I2C registers of the Atmel microcontroller. */
+#define REG_ID		0x80
+#define REG_PORTA	0x81
+#define REG_PORTA_HF	BIT(2)
+#define REG_PORTA_VF	BIT(3)
+#define REG_PORTB	0x82
+#define REG_POWERON	0x85
+#define REG_PWM		0x86
+
+static const struct regmap_config attiny_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = REG_PWM,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int attiny_lcd_power_enable(struct regulator_dev *rdev)
+{
+	unsigned int data;
+
+	regmap_write(rdev->regmap, REG_POWERON, 1);
+	/* Wait for nPWRDWN to go low to indicate poweron is done. */
+	regmap_read_poll_timeout(rdev->regmap, REG_PORTB, data,
+					data & BIT(0), 10, 1000000);
+
+	/* Default to the same orientation as the closed source
+	 * firmware used for the panel.  Runtime rotation
+	 * configuration will be supported using VC4's plane
+	 * orientation bits.
+	 */
+	regmap_write(rdev->regmap, REG_PORTA, BIT(2));
+
+	return 0;
+}
+
+static int attiny_lcd_power_disable(struct regulator_dev *rdev)
+{
+	regmap_write(rdev->regmap, REG_PWM, 0);
+	regmap_write(rdev->regmap, REG_POWERON, 0);
+	udelay(1);
+	return 0;
+}
+
+static int attiny_lcd_power_is_enabled(struct regulator_dev *rdev)
+{
+	unsigned int data;
+	int ret;
+
+	ret = regmap_read(rdev->regmap, REG_POWERON, &data);
+	if (ret < 0)
+		return ret;
+
+	if (!(data & BIT(0)))
+		return 0;
+
+	ret = regmap_read(rdev->regmap, REG_PORTB, &data);
+	if (ret < 0)
+		return ret;
+
+	return data & BIT(0);
+}
+
+static const struct regulator_init_data attiny_regulator_default = {
+	.constraints = {
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+	},
+};
+
+static const struct regulator_ops attiny_regulator_ops = {
+	.enable = attiny_lcd_power_enable,
+	.disable = attiny_lcd_power_disable,
+	.is_enabled = attiny_lcd_power_is_enabled,
+};
+
+static const struct regulator_desc attiny_regulator = {
+	.name	= "tc358762-power",
+	.ops	= &attiny_regulator_ops,
+	.type	= REGULATOR_VOLTAGE,
+	.owner	= THIS_MODULE,
+};
+
+static int attiny_update_status(struct backlight_device *bl)
+{
+	struct regmap *regmap = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK ||
+	    bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	return regmap_write(regmap, REG_PWM, brightness);
+}
+
+static int attiny_get_brightness(struct backlight_device *bl)
+{
+	struct regmap *regmap = bl_get_data(bl);
+	int ret, brightness;
+
+	ret = regmap_read(regmap, REG_PWM, &brightness);
+	if (ret)
+		return ret;
+
+	return brightness;
+}
+
+static const struct backlight_ops attiny_bl = {
+	.update_status	= attiny_update_status,
+	.get_brightness	= attiny_get_brightness,
+};
+
+/*
+ * I2C driver interface functions
+ */
+static int attiny_i2c_probe(struct i2c_client *i2c,
+		const struct i2c_device_id *id)
+{
+	struct backlight_properties props = { };
+	struct regulator_config config = { };
+	struct backlight_device *bl;
+	struct regulator_dev *rdev;
+	struct regmap *regmap;
+	unsigned int data;
+	int ret;
+
+	regmap = devm_regmap_init_i2c(i2c, &attiny_regmap_config);
+	if (IS_ERR(regmap)) {
+		ret = PTR_ERR(regmap);
+		dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+			ret);
+		return ret;
+	}
+
+	ret = regmap_read(regmap, REG_ID, &data);
+	if (ret < 0) {
+		dev_err(&i2c->dev, "Failed to read REG_ID reg: %d\n", ret);
+		return ret;
+	}
+
+	switch (data) {
+	case 0xde: /* ver 1 */
+	case 0xc3: /* ver 2 */
+		break;
+	default:
+		dev_err(&i2c->dev, "Unknown Atmel firmware revision: 0x%02x\n", data);
+		return -ENODEV;
+	}
+
+	regmap_write(regmap, REG_POWERON, 0);
+	mdelay(1);
+
+	config.dev = &i2c->dev;
+	config.regmap = regmap;
+	config.of_node = i2c->dev.of_node;
+	config.init_data = &attiny_regulator_default;
+
+	rdev = devm_regulator_register(&i2c->dev, &attiny_regulator, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&i2c->dev, "Failed to register ATTINY regulator\n");
+		return PTR_ERR(rdev);
+	}
+
+	props.type = BACKLIGHT_RAW;
+	props.max_brightness = 0xff;
+	bl = devm_backlight_device_register(&i2c->dev,
+					    "7inch-touchscreen-panel-bl",
+					    &i2c->dev, regmap, &attiny_bl,
+					    &props);
+	if (IS_ERR(bl))
+		return PTR_ERR(bl);
+
+	bl->props.brightness = 0xff;
+
+	return 0;
+}
+
+static const struct of_device_id attiny_dt_ids[] = {
+	{ .compatible = "raspberrypi,7inch-touchscreen-panel-regulator" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, attiny_dt_ids);
+
+static struct i2c_driver attiny_regulator_driver = {
+	.driver = {
+		.name = "rpi_touchscreen_attiny",
+		.of_match_table = of_match_ptr(attiny_dt_ids),
+	},
+	.probe = attiny_i2c_probe,
+};
+
+module_i2c_driver(attiny_regulator_driver);
+
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
+MODULE_DESCRIPTION("Regulator device driver for Raspberry Pi 7-inch touchscreen");
+MODULE_LICENSE("GPL v2");