Merge tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "There is nothing scary this cycle, mostly driver fixes and updates.

  The core fix has been in for a while and has been tested on multiple
  kernel revisions by multiple teams.

  Core:
   - Fix setting the alarm to the next expiring timer

  New drivers:
   - Mediatek MT7622 RTC
   - NXP PCF85363
   - Spreadtrum SC27xx PMIC RTC

  Drivers updates:
   - Use generic nvmem to expose the Non volatile ram for ds1305,
     ds1511, m48t86 and omap
   - abx80x: solve possible race condition at probe
   - armada38x: support trimming the RTC oscillator
   - at91rm9200: fix reading the alarm value at boot
   - ds1511: allow waking platform
   - m41t80: rework square wave output
   - pcf8523: support trimming the RTC oscillator
   - pcf8563: fix clock output rate
   - pl031: make interrupt optional
   - xgene: fix suspend/resume"

* tag 'rtc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
  dt-bindings: rtc: imxdi: Improve the bindings text
  rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
  dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
  rtc: at91rm9200: fix reading alarm value
  rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
  rtc: sysfs: Use time64_t variables to set time/alarm
  rtc: xgene: mark PM functions as __maybe_unused
  rtc: xgene: Fix suspend/resume
  rtc: pcf8563: don't alway enable the alarm
  rtc: pcf8563: fix output clock rate
  rtc: rx8010: Fix for incorrect return value
  rtc: rx8010: Specify correct address for RX8010_RESV31
  rtc: rx8010: Remove duplicate define
  rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
  rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
  rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
  rtc: m41t80: fix m41t80_sqw_round_rate return value
  rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
  rtc: add support for NXP PCF85363 real-time clock
  rtc: omap: Support scratch registers
  ...

1 files changed, 10 insertions, 8 deletions

diff --git a/drivers/rtc/rtc-rv3029c2.c b/drivers/rtc/rtc-rv3029c2.c
index aa09771de04f..3d6174eb32f6 100644
--- a/drivers/rtc/rtc-rv3029c2.c
+++ b/drivers/rtc/rtc-rv3029c2.c
@@ -282,13 +282,13 @@ static int rv3029_eeprom_read(struct device *dev, u8 reg,
 static int rv3029_eeprom_write(struct device *dev, u8 reg,
 			       u8 const buf[], size_t len)
 {
-	int ret, err;
+	int ret;
 	size_t i;
 	u8 tmp;
 
-	err = rv3029_eeprom_enter(dev);
-	if (err < 0)
-		return err;
+	ret = rv3029_eeprom_enter(dev);
+	if (ret < 0)
+		return ret;
 
 	for (i = 0; i < len; i++, reg++) {
 		ret = rv3029_read_regs(dev, reg, &tmp, 1);
@@ -304,11 +304,11 @@ static int rv3029_eeprom_write(struct device *dev, u8 reg,
 			break;
 	}
 
-	err = rv3029_eeprom_exit(dev);
-	if (err < 0)
-		return err;
+	ret = rv3029_eeprom_exit(dev);
+	if (ret < 0)
+		return ret;
 
-	return ret;
+	return 0;
 }
 
 static int rv3029_eeprom_update_bits(struct device *dev,
@@ -876,6 +876,8 @@ static const struct i2c_device_id rv3029_id[] = {
 MODULE_DEVICE_TABLE(i2c, rv3029_id);
 
 static const struct of_device_id rv3029_of_match[] = {
+	{ .compatible = "microcrystal,rv3029" },
+	/* Backward compatibility only, do not use compatibles below: */
 	{ .compatible = "rv3029" },
 	{ .compatible = "rv3029c2" },
 	{ .compatible = "mc,rv3029c2" },