diff options
| author | Chaitra P B <chaitra.basappa@broadcom.com> | 2018-04-24 05:28:41 -0400 |
|---|---|---|
| committer | Martin K. Petersen <martin.petersen@oracle.com> | 2018-05-08 00:39:49 -0400 |
| commit | c1a6c5ac4278d406c112cc2f038e6e506feadff9 (patch) | |
| tree | 4bbd8b6fa1b89ca29b05369db062b131ac309018 /drivers/scsi/mpt3sas/mpt3sas_base.c | |
| parent | 65928d1f4130a48732034c2f31b2b0790694537f (diff) | |
scsi: mpt3sas: For NVME device, issue a protocol level reset
1) Manufacturing Page 11 contains parameters to control internal
firmware behavior. Based on AddlFlags2 field FW/Driver behaviour can
be changed, (flag tm_custom_handling is used for this)
a) For PCIe device, protocol level reset should be used if flag
tm_custom_handling is 0. Since Abort Task Set, LUN reset and Target
reset will result in a protocol level reset. Drivers should issue
only one type of this reset, if that fails then it should escalate to
a controller reset (diag reset/OCR).
b) If the driver has control over the TM reset timeout value, then
driver should use the value exposed in PCIe Device Page 2 for pcie
device (field ControllerResetTO).
Signed-off-by: Chaitra P B <chaitra.basappa@broadcom.com>
Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'drivers/scsi/mpt3sas/mpt3sas_base.c')
| -rw-r--r-- | drivers/scsi/mpt3sas/mpt3sas_base.c | 13 |
1 files changed, 13 insertions, 0 deletions
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c index 270b39f60c6d..bf04fa90f433 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_base.c +++ b/drivers/scsi/mpt3sas/mpt3sas_base.c @@ -4142,6 +4142,7 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) Mpi2ConfigReply_t mpi_reply; u32 iounit_pg1_flags; + ioc->nvme_abort_timeout = 30; mpt3sas_config_get_manufacturing_pg0(ioc, &mpi_reply, &ioc->manu_pg0); if (ioc->ir_firmware) mpt3sas_config_get_manufacturing_pg10(ioc, &mpi_reply, @@ -4160,6 +4161,18 @@ _base_static_config_pages(struct MPT3SAS_ADAPTER *ioc) mpt3sas_config_set_manufacturing_pg11(ioc, &mpi_reply, &ioc->manu_pg11); } + if (ioc->manu_pg11.AddlFlags2 & NVME_TASK_MNGT_CUSTOM_MASK) + ioc->tm_custom_handling = 1; + else { + ioc->tm_custom_handling = 0; + if (ioc->manu_pg11.NVMeAbortTO < NVME_TASK_ABORT_MIN_TIMEOUT) + ioc->nvme_abort_timeout = NVME_TASK_ABORT_MIN_TIMEOUT; + else if (ioc->manu_pg11.NVMeAbortTO > + NVME_TASK_ABORT_MAX_TIMEOUT) + ioc->nvme_abort_timeout = NVME_TASK_ABORT_MAX_TIMEOUT; + else + ioc->nvme_abort_timeout = ioc->manu_pg11.NVMeAbortTO; + } mpt3sas_config_get_bios_pg2(ioc, &mpi_reply, &ioc->bios_pg2); mpt3sas_config_get_bios_pg3(ioc, &mpi_reply, &ioc->bios_pg3); |