Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

12 files changed, 166 insertions, 51 deletions

diff --git a/drivers/scsi/qla2xxx/Kconfig b/drivers/scsi/qla2xxx/Kconfig
index 113e6c9826a1..33f60c92e20e 100644
--- a/drivers/scsi/qla2xxx/Kconfig
+++ b/drivers/scsi/qla2xxx/Kconfig
@@ -18,6 +18,9 @@ config SCSI_QLA_FC
 	2322, 6322        ql2322_fw.bin
 	24xx, 54xx        ql2400_fw.bin
 	25xx              ql2500_fw.bin
+	2031              ql2600_fw.bin
+	8031              ql8300_fw.bin
+	27xx              ql2700_fw.bin
 
 	Upon request, the driver caches the firmware image until
 	the driver is unloaded.
diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c
index d77fe43793b6..0e6ee3ca30e6 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.c
+++ b/drivers/scsi/qla2xxx/qla_dbg.c
@@ -11,9 +11,9 @@
  * ----------------------------------------------------------------------
  * |             Level            |   Last Value Used  |     Holes	|
  * ----------------------------------------------------------------------
- * | Module Init and Probe        |       0x017d       | 0x0144,0x0146	|
+ * | Module Init and Probe        |       0x017f       | 0x0146         |
  * |                              |                    | 0x015b-0x0160	|
- * |                              |                    | 0x016e-0x0170	|
+ * |                              |                    | 0x016e-0x0170  |
  * | Mailbox commands             |       0x118d       | 0x1115-0x1116	|
  * |                              |                    | 0x111a-0x111b  |
  * | Device Discovery             |       0x2016       | 0x2020-0x2022, |
@@ -60,7 +60,7 @@
  * |                              |                    | 0xb13c-0xb140  |
  * |                              |                    | 0xb149		|
  * | MultiQ                       |       0xc00c       |		|
- * | Misc                         |       0xd213       | 0xd011-0xd017	|
+ * | Misc                         |       0xd300       | 0xd016-0xd017	|
  * |                              |                    | 0xd021,0xd024	|
  * |                              |                    | 0xd025,0xd029	|
  * |                              |                    | 0xd02a,0xd02e	|
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 5f6b2960cccb..e86201d3b8c6 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2163,7 +2163,7 @@ struct ct_fdmi_hba_attr {
 		uint8_t node_name[WWN_SIZE];
 		uint8_t manufacturer[64];
 		uint8_t serial_num[32];
-		uint8_t model[16];
+		uint8_t model[16+1];
 		uint8_t model_desc[80];
 		uint8_t hw_version[32];
 		uint8_t driver_version[32];
@@ -2184,9 +2184,9 @@ struct ct_fdmiv2_hba_attr {
 	uint16_t len;
 	union {
 		uint8_t node_name[WWN_SIZE];
-		uint8_t manufacturer[32];
+		uint8_t manufacturer[64];
 		uint8_t serial_num[32];
-		uint8_t model[16];
+		uint8_t model[16+1];
 		uint8_t model_desc[80];
 		uint8_t hw_version[16];
 		uint8_t driver_version[32];
@@ -2252,7 +2252,7 @@ struct ct_fdmiv2_port_attr {
 		uint32_t cur_speed;
 		uint32_t max_frame_size;
 		uint8_t os_dev_name[32];
-		uint8_t host_name[32];
+		uint8_t host_name[256];
 		uint8_t node_name[WWN_SIZE];
 		uint8_t port_name[WWN_SIZE];
 		uint8_t port_sym_name[128];
@@ -2283,7 +2283,7 @@ struct ct_fdmi_port_attr {
 		uint32_t cur_speed;
 		uint32_t max_frame_size;
 		uint8_t os_dev_name[32];
-		uint8_t host_name[32];
+		uint8_t host_name[256];
 	} a;
 };
 
@@ -3132,7 +3132,8 @@ struct qla_hw_data {
 				IS_QLA25XX(ha) || IS_QLA81XX(ha) || \
 				IS_QLA82XX(ha) || IS_QLA83XX(ha) || \
 				IS_QLA8044(ha) || IS_QLA27XX(ha))
-#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha))
+#define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
+				IS_QLA27XX(ha))
 #define IS_NOPOLLING_TYPE(ha)	(IS_QLA81XX(ha) && (ha)->flags.msix_enabled)
 #define IS_FAC_REQUIRED(ha)	(IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
 				IS_QLA27XX(ha))
@@ -3300,6 +3301,8 @@ struct qla_hw_data {
 #define RISC_RDY_AFT_RESET	3
 #define RISC_SRAM_DUMP_CMPL	4
 #define RISC_EXT_MEM_DUMP_CMPL	5
+#define ISP_MBX_RDY		6
+#define ISP_SOFT_RESET_CMPL	7
 	int		fw_dump_reading;
 	int		prev_minidump_failed;
 	dma_addr_t	eft_dma;
@@ -3587,6 +3590,7 @@ typedef struct scsi_qla_host {
 #define VP_BIND_NEEDED		2
 #define VP_DELETE_NEEDED	3
 #define VP_SCR_NEEDED		4	/* State Change Request registration */
+#define VP_CONFIG_OK		5	/* Flag to cfg VP, if FW is ready */
 	atomic_t 		vp_state;
 #define VP_OFFLINE		0
 #define VP_ACTIVE		1
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index e59f25bff7ab..285cb204f300 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1121,7 +1121,7 @@ qla81xx_reset_mpi(scsi_qla_host_t *vha)
  *
  * Returns 0 on success.
  */
-static inline void
+static inline int
 qla24xx_reset_risc(scsi_qla_host_t *vha)
 {
 	unsigned long flags = 0;
@@ -1130,6 +1130,7 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	uint32_t cnt, d2;
 	uint16_t wd;
 	static int abts_cnt; /* ISP abort retry counts */
+	int rval = QLA_SUCCESS;
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
@@ -1142,26 +1143,57 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 		udelay(10);
 	}
 
+	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE))
+		set_bit(DMA_SHUTDOWN_CMPL, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017e,
+	    "HCCR: 0x%x, Control Status %x, DMA active status:0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->ctrl_status),
+	    (RD_REG_DWORD(&reg->ctrl_status) & CSRX_DMA_ACTIVE));
+
 	WRT_REG_DWORD(&reg->ctrl_status,
 	    CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
 	pci_read_config_word(ha->pdev, PCI_COMMAND, &wd);
 
 	udelay(100);
+
 	/* Wait for firmware to complete NVRAM accesses. */
 	d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
-	for (cnt = 10000 ; cnt && d2; cnt--) {
-		udelay(5);
-		d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+	for (cnt = 10000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+	    rval == QLA_SUCCESS; cnt--) {
 		barrier();
+		if (cnt)
+			udelay(5);
+		else
+			rval = QLA_FUNCTION_TIMEOUT;
 	}
 
+	if (rval == QLA_SUCCESS)
+		set_bit(ISP_MBX_RDY, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x017f,
+	    "HCCR: 0x%x, MailBox0 Status 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->mailbox0));
+
 	/* Wait for soft-reset to complete. */
 	d2 = RD_REG_DWORD(&reg->ctrl_status);
-	for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
-		udelay(5);
-		d2 = RD_REG_DWORD(&reg->ctrl_status);
+	for (cnt = 0; cnt < 6000000; cnt++) {
 		barrier();
+		if ((RD_REG_DWORD(&reg->ctrl_status) &
+		    CSRX_ISP_SOFT_RESET) == 0)
+			break;
+
+		udelay(5);
 	}
+	if (!(RD_REG_DWORD(&reg->ctrl_status) & CSRX_ISP_SOFT_RESET))
+		set_bit(ISP_SOFT_RESET_CMPL, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015d,
+	    "HCCR: 0x%x, Soft Reset status: 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	    RD_REG_DWORD(&reg->ctrl_status));
 
 	/* If required, do an MPI FW reset now */
 	if (test_and_clear_bit(MPI_RESET_NEEDED, &vha->dpc_flags)) {
@@ -1190,16 +1222,32 @@ qla24xx_reset_risc(scsi_qla_host_t *vha)
 	RD_REG_DWORD(&reg->hccr);
 
 	d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
-	for (cnt = 6000000 ; cnt && d2; cnt--) {
-		udelay(5);
-		d2 = (uint32_t) RD_REG_WORD(&reg->mailbox0);
+	for (cnt = 6000000; RD_REG_WORD(&reg->mailbox0) != 0 &&
+	    rval == QLA_SUCCESS; cnt--) {
 		barrier();
+		if (cnt)
+			udelay(5);
+		else
+			rval = QLA_FUNCTION_TIMEOUT;
 	}
+	if (rval == QLA_SUCCESS)
+		set_bit(RISC_RDY_AFT_RESET, &ha->fw_dump_cap_flags);
+
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015e,
+	    "Host Risc 0x%x, mailbox0 0x%x\n",
+	    RD_REG_DWORD(&reg->hccr),
+	     RD_REG_WORD(&reg->mailbox0));
 
 	spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
+	ql_dbg(ql_dbg_init + ql_dbg_verbose, vha, 0x015f,
+	    "Driver in %s mode\n",
+	    IS_NOPOLLING_TYPE(ha) ? "Interrupt" : "Polling");
+
 	if (IS_NOPOLLING_TYPE(ha))
 		ha->isp_ops->enable_intrs(ha);
+
+	return rval;
 }
 
 static void
@@ -2243,8 +2291,11 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 
 	rval = QLA_SUCCESS;
 
-	/* 20 seconds for loop down. */
-	min_wait = 20;
+	/* Time to wait for loop down */
+	if (IS_P3P_TYPE(ha))
+		min_wait = 30;
+	else
+		min_wait = 20;
 
 	/*
 	 * Firmware should take at most one RATOV to login, plus 5 seconds for
@@ -5364,7 +5415,7 @@ qla2x00_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	blob = qla2x00_request_firmware(vha);
 	if (!blob) {
 		ql_log(ql_log_info, vha, 0x0083,
-		    "Fimware image unavailable.\n");
+		    "Firmware image unavailable.\n");
 		ql_log(ql_log_info, vha, 0x0084,
 		    "Firmware images can be retrieved from: "QLA_FW_URL ".\n");
 		return QLA_FUNCTION_FAILED;
@@ -5467,7 +5518,7 @@ qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr)
 	blob = qla2x00_request_firmware(vha);
 	if (!blob) {
 		ql_log(ql_log_warn, vha, 0x0090,
-		    "Fimware image unavailable.\n");
+		    "Firmware image unavailable.\n");
 		ql_log(ql_log_warn, vha, 0x0091,
 		    "Firmware images can be retrieved from: "
 		    QLA_FW_URL ".\n");
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index a04a1b1f7f32..6dc14cd782b2 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -756,11 +756,21 @@ skip_rio:
 			/*
 			 * In case of loop down, restore WWPN from
 			 * NVRAM in case of FA-WWPN capable ISP
+			 * Restore for Physical Port only
 			 */
-			if (ha->flags.fawwpn_enabled) {
-				void *wwpn = ha->init_cb->port_name;
+			if (!vha->vp_idx) {
+				if (ha->flags.fawwpn_enabled) {
+					void *wwpn = ha->init_cb->port_name;
+					memcpy(vha->port_name, wwpn, WWN_SIZE);
+					fc_host_port_name(vha->host) =
+					    wwn_to_u64(vha->port_name);
+					ql_dbg(ql_dbg_init + ql_dbg_verbose,
+					    vha, 0x0144, "LOOP DOWN detected,"
+					    "restore WWPN %016llx\n",
+					    wwn_to_u64(vha->port_name));
+				}
 
-				memcpy(vha->port_name, wwpn, WWN_SIZE);
+				clear_bit(VP_CONFIG_OK, &vha->vp_flags);
 			}
 
 			vha->device_flags |= DFLG_NO_CABLE;
@@ -947,6 +957,7 @@ skip_rio:
 
 		set_bit(LOOP_RESYNC_NEEDED, &vha->dpc_flags);
 		set_bit(LOCAL_LOOP_UPDATE, &vha->dpc_flags);
+		set_bit(VP_CONFIG_OK, &vha->vp_flags);
 
 		qlt_async_event(mb[0], vha, mb);
 		break;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 72971daa2552..02b1c1c5355b 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -33,7 +33,7 @@
 static int
 qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 {
-	int		rval;
+	int		rval, i;
 	unsigned long    flags = 0;
 	device_reg_t *reg;
 	uint8_t		abort_active;
@@ -43,10 +43,12 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	uint16_t __iomem *optr;
 	uint32_t	cnt;
 	uint32_t	mboxes;
+	uint16_t __iomem *mbx_reg;
 	unsigned long	wait_time;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
+
 	ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
 
 	if (ha->pdev->error_state > pci_channel_io_frozen) {
@@ -376,6 +378,18 @@ mbx_done:
 		ql_dbg(ql_dbg_disc, base_vha, 0x1020,
 		    "**** Failed mbx[0]=%x, mb[1]=%x, mb[2]=%x, mb[3]=%x, cmd=%x ****.\n",
 		    mcp->mb[0], mcp->mb[1], mcp->mb[2], mcp->mb[3], command);
+
+		ql_dbg(ql_dbg_disc, vha, 0x1115,
+		    "host status: 0x%x, flags:0x%lx, intr ctrl reg:0x%x, intr status:0x%x\n",
+		    RD_REG_DWORD(&reg->isp24.host_status),
+		    ha->fw_dump_cap_flags,
+		    RD_REG_DWORD(&reg->isp24.ictrl),
+		    RD_REG_DWORD(&reg->isp24.istatus));
+
+		mbx_reg = &reg->isp24.mailbox0;
+		for (i = 0; i < 6; i++)
+			ql_dbg(ql_dbg_disc + ql_dbg_verbose, vha, 0x1116,
+			    "mbox[%d] 0x%04x\n", i, RD_REG_WORD(mbx_reg++));
 	} else {
 		ql_dbg(ql_dbg_mbx, base_vha, 0x1021, "Done %s.\n", __func__);
 	}
@@ -2838,7 +2852,7 @@ qla2x00_write_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t data)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (!IS_QLA2031(vha->hw))
+	if (!IS_QLA2031(vha->hw) && !IS_QLA27XX(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1182,
@@ -2846,7 +2860,11 @@ qla2x00_write_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t data)
 
 	mcp->mb[0] = MBC_WRITE_SERDES;
 	mcp->mb[1] = addr;
-	mcp->mb[2] = data & 0xff;
+	if (IS_QLA2031(vha->hw))
+		mcp->mb[2] = data & 0xff;
+	else
+		mcp->mb[2] = data;
+
 	mcp->mb[3] = 0;
 	mcp->out_mb = MBX_3|MBX_2|MBX_1|MBX_0;
 	mcp->in_mb = MBX_0;
@@ -2872,7 +2890,7 @@ qla2x00_read_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t *data)
 	mbx_cmd_t mc;
 	mbx_cmd_t *mcp = &mc;
 
-	if (!IS_QLA2031(vha->hw))
+	if (!IS_QLA2031(vha->hw) && !IS_QLA27XX(vha->hw))
 		return QLA_FUNCTION_FAILED;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1185,
@@ -2887,7 +2905,10 @@ qla2x00_read_serdes_word(scsi_qla_host_t *vha, uint16_t addr, uint16_t *data)
 	mcp->flags = 0;
 	rval = qla2x00_mailbox_command(vha, mcp);
 
-	*data = mcp->mb[1] & 0xff;
+	if (IS_QLA2031(vha->hw))
+		*data = mcp->mb[1] & 0xff;
+	else
+		*data = mcp->mb[1];
 
 	if (rval != QLA_SUCCESS) {
 		ql_dbg(ql_dbg_mbx, vha, 0x1186,
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index 5c2e0317f1c0..cc94192511cf 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -306,19 +306,25 @@ qla2x00_vp_abort_isp(scsi_qla_host_t *vha)
 static int
 qla2x00_do_dpc_vp(scsi_qla_host_t *vha)
 {
+	struct qla_hw_data *ha = vha->hw;
+	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
+
 	ql_dbg(ql_dbg_dpc + ql_dbg_verbose, vha, 0x4012,
 	    "Entering %s vp_flags: 0x%lx.\n", __func__, vha->vp_flags);
 
 	qla2x00_do_work(vha);
 
-	if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) {
-		/* VP acquired. complete port configuration */
-		ql_dbg(ql_dbg_dpc, vha, 0x4014,
-		    "Configure VP scheduled.\n");
-		qla24xx_configure_vp(vha);
-		ql_dbg(ql_dbg_dpc, vha, 0x4015,
-		    "Configure VP end.\n");
-		return 0;
+	/* Check if Fw is ready to configure VP first */
+	if (test_bit(VP_CONFIG_OK, &base_vha->vp_flags)) {
+		if (test_and_clear_bit(VP_IDX_ACQUIRED, &vha->vp_flags)) {
+			/* VP acquired. complete port configuration */
+			ql_dbg(ql_dbg_dpc, vha, 0x4014,
+			    "Configure VP scheduled.\n");
+			qla24xx_configure_vp(vha);
+			ql_dbg(ql_dbg_dpc, vha, 0x4015,
+			    "Configure VP end.\n");
+			return 0;
+		}
 	}
 
 	if (test_bit(FCPORT_UPDATE_NEEDED, &vha->dpc_flags)) {
@@ -788,7 +794,7 @@ qla25xx_create_rsp_que(struct qla_hw_data *ha, uint16_t options,
 		rsp->msix = &ha->msix_entries[que_id + 1];
 	else
 		ql_log(ql_log_warn, base_vha, 0x00e3,
-		    "MSIX not enalbled.\n");
+		    "MSIX not enabled.\n");
 
 	ha->rsp_q_map[que_id] = rsp;
 	rsp->rid = rid;
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index 54cb2ac9339b..7d2b18f2675c 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -1274,7 +1274,7 @@ qla82xx_pinit_from_rom(scsi_qla_host_t *vha)
 
 		if (off == ADDR_ERROR) {
 			ql_log(ql_log_fatal, vha, 0x0116,
-			    "Unknow addr: 0x%08lx.\n", buf[i].addr);
+			    "Unknown addr: 0x%08lx.\n", buf[i].addr);
 			continue;
 		}
 
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index cce1cbc1a927..7462dd70b150 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -446,11 +446,11 @@ static int qla25xx_setup_mode(struct scsi_qla_host *vha)
 		}
 		ha->flags.cpu_affinity_enabled = 1;
 		ql_dbg(ql_dbg_multiq, vha, 0xc007,
-		    "CPU affinity mode enalbed, "
+		    "CPU affinity mode enabled, "
 		    "no. of response queues:%d no. of request queues:%d.\n",
 		    ha->max_rsp_queues, ha->max_req_queues);
 		ql_dbg(ql_dbg_init, vha, 0x00e9,
-		    "CPU affinity mode enalbed, "
+		    "CPU affinity mode enabled, "
 		    "no. of response queues:%d no. of request queues:%d.\n",
 		    ha->max_rsp_queues, ha->max_req_queues);
 	}
@@ -4102,7 +4102,7 @@ qla83xx_schedule_work(scsi_qla_host_t *base_vha, int work_code)
 		break;
 	default:
 		ql_log(ql_log_warn, base_vha, 0xb05f,
-		    "Unknow work-code=0x%x.\n", work_code);
+		    "Unknown work-code=0x%x.\n", work_code);
 	}
 
 	return;
@@ -4702,7 +4702,7 @@ qla83xx_idc_state_handler(scsi_qla_host_t *base_vha)
 			break;
 		default:
 			ql_log(ql_log_warn, base_vha, 0xb071,
-			    "Unknow Device State: %x.\n", dev_state);
+			    "Unknown Device State: %x.\n", dev_state);
 			qla83xx_idc_unlock(base_vha, 0);
 			qla8xxx_dev_failed_handler(base_vha);
 			rval = QLA_FUNCTION_FAILED;
@@ -5834,3 +5834,6 @@ MODULE_FIRMWARE(FW_FILE_ISP2300);
 MODULE_FIRMWARE(FW_FILE_ISP2322);
 MODULE_FIRMWARE(FW_FILE_ISP24XX);
 MODULE_FIRMWARE(FW_FILE_ISP25XX);
+MODULE_FIRMWARE(FW_FILE_ISP2031);
+MODULE_FIRMWARE(FW_FILE_ISP8031);
+MODULE_FIRMWARE(FW_FILE_ISP27XX);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index b656a05613e8..028e8c8a7de9 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1718,13 +1718,16 @@ qla83xx_beacon_blink(struct scsi_qla_host *vha)
 	uint16_t orig_led_cfg[6];
 	uint32_t led_10_value, led_43_value;
 
-	if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha))
+	if (!IS_QLA83XX(ha) && !IS_QLA81XX(ha) && !IS_QLA27XX(ha))
 		return;
 
 	if (!ha->beacon_blink_led)
 		return;
 
-	if (IS_QLA2031(ha)) {
+	if (IS_QLA27XX(ha)) {
+		qla2x00_write_ram_word(vha, 0x1003, 0x40000230);
+		qla2x00_write_ram_word(vha, 0x1004, 0x40000230);
+	} else if (IS_QLA2031(ha)) {
 		led_select_value = qla83xx_select_led_port(ha);
 
 		qla83xx_wr_reg(vha, led_select_value, 0x40000230);
@@ -1811,7 +1814,7 @@ qla24xx_beacon_on(struct scsi_qla_host *vha)
 			return QLA_FUNCTION_FAILED;
 		}
 
-		if (IS_QLA2031(ha))
+		if (IS_QLA2031(ha) || IS_QLA27XX(ha))
 			goto skip_gpio;
 
 		spin_lock_irqsave(&ha->hardware_lock, flags);
@@ -1848,7 +1851,7 @@ qla24xx_beacon_off(struct scsi_qla_host *vha)
 
 	ha->beacon_blink_led = 0;
 
-	if (IS_QLA2031(ha))
+	if (IS_QLA2031(ha) || IS_QLA27XX(ha))
 		goto set_fw_options;
 
 	if (IS_QLA8031(ha) || IS_QLA81XX(ha))
diff --git a/drivers/scsi/qla2xxx/qla_tmpl.c b/drivers/scsi/qla2xxx/qla_tmpl.c
index a8c0c7362e48..962cb89fe0ae 100644
--- a/drivers/scsi/qla2xxx/qla_tmpl.c
+++ b/drivers/scsi/qla2xxx/qla_tmpl.c
@@ -190,7 +190,7 @@ static inline void
 qla27xx_write_reg(__iomem struct device_reg_24xx *reg,
 	uint offset, uint32_t data, void *buf)
 {
-	__iomem void *window = reg + offset;
+	__iomem void *window = (void __iomem *)reg + offset;
 
 	if (buf) {
 		WRT_REG_DWORD(window, data);
@@ -219,6 +219,8 @@ qla27xx_skip_entry(struct qla27xx_fwdt_entry *ent, void *buf)
 {
 	if (buf)
 		ent->hdr.driver_flags |= DRIVER_FLAG_SKIP_ENTRY;
+	ql_dbg(ql_dbg_misc + ql_dbg_verbose, NULL, 0xd011,
+	    "Skipping entry %d\n", ent->hdr.entry_type);
 }
 
 static int
@@ -784,6 +786,13 @@ qla27xx_walk_template(struct scsi_qla_host *vha,
 
 	ql_dbg(ql_dbg_misc, vha, 0xd01b,
 	    "%s: len=%lx\n", __func__, *len);
+
+	if (buf) {
+		ql_log(ql_log_warn, vha, 0xd015,
+		    "Firmware dump saved to temp buffer (%ld/%p)\n",
+		    vha->host_no, vha->hw->fw_dump);
+		qla2x00_post_uevent_work(vha, QLA_UEVENT_CODE_FW_DUMP);
+	}
 }
 
 static void
@@ -938,6 +947,10 @@ qla27xx_fwdump(scsi_qla_host_t *vha, int hardware_locked)
 		ql_log(ql_log_warn, vha, 0xd01e, "fwdump buffer missing.\n");
 	else if (!vha->hw->fw_dump_template)
 		ql_log(ql_log_warn, vha, 0xd01f, "fwdump template missing.\n");
+	else if (vha->hw->fw_dumped)
+		ql_log(ql_log_warn, vha, 0xd300,
+		    "Firmware has been previously dumped (%p),"
+		    " -- ignoring request\n", vha->hw->fw_dump);
 	else
 		qla27xx_execute_fwdt_template(vha);
 
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index d88b86214ec5..2ed9ab90a455 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.07.00.16-k"
+#define QLA2XXX_VERSION      "8.07.00.18-k"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	7