tty: move drivers/serial/ to drivers/tty/serial/

The serial drivers are really just tty drivers, so move them to
drivers/tty/ to make things a bit neater overall.

This is part of the tty/serial driver movement proceedure as proposed by
Arnd Bergmann and approved by everyone involved a number of months ago.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl>
Cc: Michael H. Warfield <mhw@wittsend.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 0 insertions, 1658 deletions

diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
deleted file mode 100644
index 53a468227056..000000000000
--- a/drivers/serial/icom.c
+++ /dev/null
@@ -1,1658 +0,0 @@
-/*
-  * icom.c
-  *
-  * Copyright (C) 2001 IBM Corporation. All rights reserved.
-  *
-  * Serial device driver.
-  *
-  * Based on code from serial.c
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2 of the License, or
-  * (at your option) any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; if not, write to the Free Software
-  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
-  *
-  */
-#define SERIAL_DO_RESTART
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/termios.h>
-#include <linux/fs.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/serial_reg.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/vmalloc.h>
-#include <linux/smp.h>
-#include <linux/spinlock.h>
-#include <linux/kref.h>
-#include <linux/firmware.h>
-#include <linux/bitops.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
-
-#include "icom.h"
-
-/*#define ICOM_TRACE		 enable port trace capabilities */
-
-#define ICOM_DRIVER_NAME "icom"
-#define ICOM_VERSION_STR "1.3.1"
-#define NR_PORTS	       128
-#define ICOM_PORT ((struct icom_port *)port)
-#define to_icom_adapter(d) container_of(d, struct icom_adapter, kref)
-
-static const struct pci_device_id icom_pci_table[] = {
-	{
-		.vendor = PCI_VENDOR_ID_IBM,
-		.device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = ADAPTER_V1,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_IBM,
-		.device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
-		.subvendor = PCI_VENDOR_ID_IBM,
-		.subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX,
-		.driver_data = ADAPTER_V2,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_IBM,
-		.device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
-		.subvendor = PCI_VENDOR_ID_IBM,
-		.subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM,
-		.driver_data = ADAPTER_V2,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_IBM,
-		.device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
-		.subvendor = PCI_VENDOR_ID_IBM,
-		.subdevice = PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL,
-		.driver_data = ADAPTER_V2,
-	},
-	{
-		.vendor = PCI_VENDOR_ID_IBM,
-		.device = PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2,
-		.subvendor = PCI_VENDOR_ID_IBM,
-		.subdevice = PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM_PCIE,
-		.driver_data = ADAPTER_V2,
-	},
-	{}
-};
-
-struct lookup_proc_table start_proc[4] = {
-	{NULL, ICOM_CONTROL_START_A},
-	{NULL, ICOM_CONTROL_START_B},
-	{NULL, ICOM_CONTROL_START_C},
-	{NULL, ICOM_CONTROL_START_D}
-};
-
-
-struct lookup_proc_table stop_proc[4] = {
-	{NULL, ICOM_CONTROL_STOP_A},
-	{NULL, ICOM_CONTROL_STOP_B},
-	{NULL, ICOM_CONTROL_STOP_C},
-	{NULL, ICOM_CONTROL_STOP_D}
-};
-
-struct lookup_int_table int_mask_tbl[4] = {
-	{NULL, ICOM_INT_MASK_PRC_A},
-	{NULL, ICOM_INT_MASK_PRC_B},
-	{NULL, ICOM_INT_MASK_PRC_C},
-	{NULL, ICOM_INT_MASK_PRC_D},
-};
-
-
-MODULE_DEVICE_TABLE(pci, icom_pci_table);
-
-static LIST_HEAD(icom_adapter_head);
-
-/* spinlock for adapter initialization and changing adapter operations */
-static spinlock_t icom_lock;
-
-#ifdef ICOM_TRACE
-static inline void trace(struct icom_port *icom_port, char *trace_pt,
-			unsigned long trace_data)
-{
-	dev_info(&icom_port->adapter->pci_dev->dev, ":%d:%s - %lx\n",
-	icom_port->port, trace_pt, trace_data);
-}
-#else
-static inline void trace(struct icom_port *icom_port, char *trace_pt, unsigned long trace_data) {};
-#endif
-static void icom_kref_release(struct kref *kref);
-
-static void free_port_memory(struct icom_port *icom_port)
-{
-	struct pci_dev *dev = icom_port->adapter->pci_dev;
-
-	trace(icom_port, "RET_PORT_MEM", 0);
-	if (icom_port->recv_buf) {
-		pci_free_consistent(dev, 4096, icom_port->recv_buf,
-				    icom_port->recv_buf_pci);
-		icom_port->recv_buf = NULL;
-	}
-	if (icom_port->xmit_buf) {
-		pci_free_consistent(dev, 4096, icom_port->xmit_buf,
-				    icom_port->xmit_buf_pci);
-		icom_port->xmit_buf = NULL;
-	}
-	if (icom_port->statStg) {
-		pci_free_consistent(dev, 4096, icom_port->statStg,
-				    icom_port->statStg_pci);
-		icom_port->statStg = NULL;
-	}
-
-	if (icom_port->xmitRestart) {
-		pci_free_consistent(dev, 4096, icom_port->xmitRestart,
-				    icom_port->xmitRestart_pci);
-		icom_port->xmitRestart = NULL;
-	}
-}
-
-static int __devinit get_port_memory(struct icom_port *icom_port)
-{
-	int index;
-	unsigned long stgAddr;
-	unsigned long startStgAddr;
-	unsigned long offset;
-	struct pci_dev *dev = icom_port->adapter->pci_dev;
-
-	icom_port->xmit_buf =
-	    pci_alloc_consistent(dev, 4096, &icom_port->xmit_buf_pci);
-	if (!icom_port->xmit_buf) {
-		dev_err(&dev->dev, "Can not allocate Transmit buffer\n");
-		return -ENOMEM;
-	}
-
-	trace(icom_port, "GET_PORT_MEM",
-	      (unsigned long) icom_port->xmit_buf);
-
-	icom_port->recv_buf =
-	    pci_alloc_consistent(dev, 4096, &icom_port->recv_buf_pci);
-	if (!icom_port->recv_buf) {
-		dev_err(&dev->dev, "Can not allocate Receive buffer\n");
-		free_port_memory(icom_port);
-		return -ENOMEM;
-	}
-	trace(icom_port, "GET_PORT_MEM",
-	      (unsigned long) icom_port->recv_buf);
-
-	icom_port->statStg =
-	    pci_alloc_consistent(dev, 4096, &icom_port->statStg_pci);
-	if (!icom_port->statStg) {
-		dev_err(&dev->dev, "Can not allocate Status buffer\n");
-		free_port_memory(icom_port);
-		return -ENOMEM;
-	}
-	trace(icom_port, "GET_PORT_MEM",
-	      (unsigned long) icom_port->statStg);
-
-	icom_port->xmitRestart =
-	    pci_alloc_consistent(dev, 4096, &icom_port->xmitRestart_pci);
-	if (!icom_port->xmitRestart) {
-		dev_err(&dev->dev,
-			"Can not allocate xmit Restart buffer\n");
-		free_port_memory(icom_port);
-		return -ENOMEM;
-	}
-
-	memset(icom_port->statStg, 0, 4096);
-
-	/* FODs: Frame Out Descriptor Queue, this is a FIFO queue that
-           indicates that frames are to be transmitted
-	*/
-
-	stgAddr = (unsigned long) icom_port->statStg;
-	for (index = 0; index < NUM_XBUFFS; index++) {
-		trace(icom_port, "FOD_ADDR", stgAddr);
-		stgAddr = stgAddr + sizeof(icom_port->statStg->xmit[0]);
-		if (index < (NUM_XBUFFS - 1)) {
-			memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
-			icom_port->statStg->xmit[index].leLengthASD =
-			    (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
-			trace(icom_port, "FOD_ADDR", stgAddr);
-			trace(icom_port, "FOD_XBUFF",
-			      (unsigned long) icom_port->xmit_buf);
-			icom_port->statStg->xmit[index].leBuffer =
-			    cpu_to_le32(icom_port->xmit_buf_pci);
-		} else if (index == (NUM_XBUFFS - 1)) {
-			memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
-			icom_port->statStg->xmit[index].leLengthASD =
-			    (unsigned short int) cpu_to_le16(XMIT_BUFF_SZ);
-			trace(icom_port, "FOD_XBUFF",
-			      (unsigned long) icom_port->xmit_buf);
-			icom_port->statStg->xmit[index].leBuffer =
-			    cpu_to_le32(icom_port->xmit_buf_pci);
-		} else {
-			memset(&icom_port->statStg->xmit[index], 0, sizeof(struct xmit_status_area));
-		}
-	}
-	/* FIDs */
-	startStgAddr = stgAddr;
-
-	/* fill in every entry, even if no buffer */
-	for (index = 0; index <  NUM_RBUFFS; index++) {
-		trace(icom_port, "FID_ADDR", stgAddr);
-		stgAddr = stgAddr + sizeof(icom_port->statStg->rcv[0]);
-		icom_port->statStg->rcv[index].leLength = 0;
-		icom_port->statStg->rcv[index].WorkingLength =
-		    (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
-		if (index < (NUM_RBUFFS - 1) ) {
-			offset = stgAddr - (unsigned long) icom_port->statStg;
-			icom_port->statStg->rcv[index].leNext =
-			      cpu_to_le32(icom_port-> statStg_pci + offset);
-			trace(icom_port, "FID_RBUFF",
-			      (unsigned long) icom_port->recv_buf);
-			icom_port->statStg->rcv[index].leBuffer =
-			    cpu_to_le32(icom_port->recv_buf_pci);
-		} else if (index == (NUM_RBUFFS -1) ) {
-			offset = startStgAddr - (unsigned long) icom_port->statStg;
-			icom_port->statStg->rcv[index].leNext =
-			    cpu_to_le32(icom_port-> statStg_pci + offset);
-			trace(icom_port, "FID_RBUFF",
-			      (unsigned long) icom_port->recv_buf + 2048);
-			icom_port->statStg->rcv[index].leBuffer =
-			    cpu_to_le32(icom_port->recv_buf_pci + 2048);
-		} else {
-			icom_port->statStg->rcv[index].leNext = 0;
-			icom_port->statStg->rcv[index].leBuffer = 0;
-		}
-	}
-
-	return 0;
-}
-
-static void stop_processor(struct icom_port *icom_port)
-{
-	unsigned long temp;
-	unsigned long flags;
-	int port;
-
-	spin_lock_irqsave(&icom_lock, flags);
-
-	port = icom_port->port;
-	if (port == 0 || port == 1)
-		stop_proc[port].global_control_reg = &icom_port->global_reg->control;
-	else
-		stop_proc[port].global_control_reg = &icom_port->global_reg->control_2;
-
-
-	if (port < 4) {
-		temp = readl(stop_proc[port].global_control_reg);
-		temp =
-			(temp & ~start_proc[port].processor_id) | stop_proc[port].processor_id;
-		writel(temp, stop_proc[port].global_control_reg);
-
-		/* write flush */
-		readl(stop_proc[port].global_control_reg);
-	} else {
-		dev_err(&icom_port->adapter->pci_dev->dev,
-                        "Invalid port assignment\n");
-	}
-
-	spin_unlock_irqrestore(&icom_lock, flags);
-}
-
-static void start_processor(struct icom_port *icom_port)
-{
-	unsigned long temp;
-	unsigned long flags;
-	int port;
-
-	spin_lock_irqsave(&icom_lock, flags);
-
-	port = icom_port->port;
-	if (port == 0 || port == 1)
-		start_proc[port].global_control_reg = &icom_port->global_reg->control;
-	else
-		start_proc[port].global_control_reg = &icom_port->global_reg->control_2;
-	if (port < 4) {
-		temp = readl(start_proc[port].global_control_reg);
-		temp =
-			(temp & ~stop_proc[port].processor_id) | start_proc[port].processor_id;
-		writel(temp, start_proc[port].global_control_reg);
-
-		/* write flush */
-		readl(start_proc[port].global_control_reg);
-	} else {
-		dev_err(&icom_port->adapter->pci_dev->dev,
-                        "Invalid port assignment\n");
-	}
-
-	spin_unlock_irqrestore(&icom_lock, flags);
-}
-
-static void load_code(struct icom_port *icom_port)
-{
-	const struct firmware *fw;
-	char __iomem *iram_ptr;
-	int index;
-	int status = 0;
-	void __iomem *dram_ptr = icom_port->dram;
-	dma_addr_t temp_pci;
-	unsigned char *new_page = NULL;
-	unsigned char cable_id = NO_CABLE;
-	struct pci_dev *dev = icom_port->adapter->pci_dev;
-
-	/* Clear out any pending interrupts */
-	writew(0x3FFF, icom_port->int_reg);
-
-	trace(icom_port, "CLEAR_INTERRUPTS", 0);
-
-	/* Stop processor */
-	stop_processor(icom_port);
-
-	/* Zero out DRAM */
-	memset_io(dram_ptr, 0, 512);
-
-	/* Load Call Setup into Adapter */
-	if (request_firmware(&fw, "icom_call_setup.bin", &dev->dev) < 0) {
-		dev_err(&dev->dev,"Unable to load icom_call_setup.bin firmware image\n");
-		status = -1;
-		goto load_code_exit;
-	}
-
-	if (fw->size > ICOM_DCE_IRAM_OFFSET) {
-		dev_err(&dev->dev, "Invalid firmware image for icom_call_setup.bin found.\n");
-		release_firmware(fw);
-		status = -1;
-		goto load_code_exit;
-	}
-
-	iram_ptr = (char __iomem *)icom_port->dram + ICOM_IRAM_OFFSET;
-	for (index = 0; index < fw->size; index++)
-		writeb(fw->data[index], &iram_ptr[index]);
-
-	release_firmware(fw);
-
-	/* Load Resident DCE portion of Adapter */
-	if (request_firmware(&fw, "icom_res_dce.bin", &dev->dev) < 0) {
-		dev_err(&dev->dev,"Unable to load icom_res_dce.bin firmware image\n");
-		status = -1;
-		goto load_code_exit;
-	}
-
-	if (fw->size > ICOM_IRAM_SIZE) {
-		dev_err(&dev->dev, "Invalid firmware image for icom_res_dce.bin found.\n");
-		release_firmware(fw);
-		status = -1;
-		goto load_code_exit;
-	}
-
-	iram_ptr = (char __iomem *) icom_port->dram + ICOM_IRAM_OFFSET;
-	for (index = ICOM_DCE_IRAM_OFFSET; index < fw->size; index++)
-		writeb(fw->data[index], &iram_ptr[index]);
-
-	release_firmware(fw);
-
-	/* Set Hardware level */
-	if (icom_port->adapter->version == ADAPTER_V2)
-		writeb(V2_HARDWARE, &(icom_port->dram->misc_flags));
-
-	/* Start the processor in Adapter */
-	start_processor(icom_port);
-
-	writeb((HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL),
-	       &(icom_port->dram->HDLCConfigReg));
-	writeb(0x04, &(icom_port->dram->FlagFillIdleTimer));	/* 0.5 seconds */
-	writeb(0x00, &(icom_port->dram->CmdReg));
-	writeb(0x10, &(icom_port->dram->async_config3));
-	writeb((ICOM_ACFG_DRIVE1 | ICOM_ACFG_NO_PARITY | ICOM_ACFG_8BPC |
-		ICOM_ACFG_1STOP_BIT), &(icom_port->dram->async_config2));
-
-	/*Set up data in icom DRAM to indicate where personality
-	 *code is located and its length.
-	 */
-	new_page = pci_alloc_consistent(dev, 4096, &temp_pci);
-
-	if (!new_page) {
-		dev_err(&dev->dev, "Can not allocate DMA buffer\n");
-		status = -1;
-		goto load_code_exit;
-	}
-
-	if (request_firmware(&fw, "icom_asc.bin", &dev->dev) < 0) {
-		dev_err(&dev->dev,"Unable to load icom_asc.bin firmware image\n");
-		status = -1;
-		goto load_code_exit;
-	}
-
-	if (fw->size > ICOM_DCE_IRAM_OFFSET) {
-		dev_err(&dev->dev, "Invalid firmware image for icom_asc.bin found.\n");
-		release_firmware(fw);
-		status = -1;
-		goto load_code_exit;
-	}
-
-	for (index = 0; index < fw->size; index++)
-		new_page[index] = fw->data[index];
-
-	release_firmware(fw);
-
-	writeb((char) ((fw->size + 16)/16), &icom_port->dram->mac_length);
-	writel(temp_pci, &icom_port->dram->mac_load_addr);
-
-	/*Setting the syncReg to 0x80 causes adapter to start downloading
-	   the personality code into adapter instruction RAM.
-	   Once code is loaded, it will begin executing and, based on
-	   information provided above, will start DMAing data from
-	   shared memory to adapter DRAM.
-	 */
-	/* the wait loop below verifies this write operation has been done
-	   and processed
-	*/
-	writeb(START_DOWNLOAD, &icom_port->dram->sync);
-
-	/* Wait max 1 Sec for data download and processor to start */
-	for (index = 0; index < 10; index++) {
-		msleep(100);
-		if (readb(&icom_port->dram->misc_flags) & ICOM_HDW_ACTIVE)
-			break;
-	}
-
-	if (index == 10)
-		status = -1;
-
-	/*
-	 * check Cable ID
-	 */
-	cable_id = readb(&icom_port->dram->cable_id);
-
-	if (cable_id & ICOM_CABLE_ID_VALID) {
-		/* Get cable ID into the lower 4 bits (standard form) */
-		cable_id = (cable_id & ICOM_CABLE_ID_MASK) >> 4;
-		icom_port->cable_id = cable_id;
-	} else {
-		dev_err(&dev->dev,"Invalid or no cable attached\n");
-		icom_port->cable_id = NO_CABLE;
-	}
-
-      load_code_exit:
-
-	if (status != 0) {
-		/* Clear out any pending interrupts */
-		writew(0x3FFF, icom_port->int_reg);
-
-		/* Turn off port */
-		writeb(ICOM_DISABLE, &(icom_port->dram->disable));
-
-		/* Stop processor */
-		stop_processor(icom_port);
-
-		dev_err(&icom_port->adapter->pci_dev->dev,"Port not opertional\n");
-	}
-
-	if (new_page != NULL)
-		pci_free_consistent(dev, 4096, new_page, temp_pci);
-}
-
-static int startup(struct icom_port *icom_port)
-{
-	unsigned long temp;
-	unsigned char cable_id, raw_cable_id;
-	unsigned long flags;
-	int port;
-
-	trace(icom_port, "STARTUP", 0);
-
-	if (!icom_port->dram) {
-		/* should NEVER be NULL */
-		dev_err(&icom_port->adapter->pci_dev->dev,
-			"Unusable Port, port configuration missing\n");
-		return -ENODEV;
-	}
-
-	/*
-	 * check Cable ID
-	 */
-	raw_cable_id = readb(&icom_port->dram->cable_id);
-	trace(icom_port, "CABLE_ID", raw_cable_id);
-
-	/* Get cable ID into the lower 4 bits (standard form) */
-	cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
-
-	/* Check for valid Cable ID */
-	if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
-	    (cable_id != icom_port->cable_id)) {
-
-		/* reload adapter code, pick up any potential changes in cable id */
-		load_code(icom_port);
-
-		/* still no sign of cable, error out */
-		raw_cable_id = readb(&icom_port->dram->cable_id);
-		cable_id = (raw_cable_id & ICOM_CABLE_ID_MASK) >> 4;
-		if (!(raw_cable_id & ICOM_CABLE_ID_VALID) ||
-		    (icom_port->cable_id == NO_CABLE))
-			return -EIO;
-	}
-
-	/*
-	 * Finally, clear and  enable interrupts
-	 */
-	spin_lock_irqsave(&icom_lock, flags);
-	port = icom_port->port;
-	if (port == 0 || port == 1)
-		int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
-	else
-		int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
-
-	if (port == 0 || port == 2)
-		writew(0x00FF, icom_port->int_reg);
-	else
-		writew(0x3F00, icom_port->int_reg);
-	if (port < 4) {
-		temp = readl(int_mask_tbl[port].global_int_mask);
-		writel(temp & ~int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
-
-		/* write flush */
-		readl(int_mask_tbl[port].global_int_mask);
-	} else {
-		dev_err(&icom_port->adapter->pci_dev->dev,
-                        "Invalid port assignment\n");
-	}
-
-	spin_unlock_irqrestore(&icom_lock, flags);
-	return 0;
-}
-
-static void shutdown(struct icom_port *icom_port)
-{
-	unsigned long temp;
-	unsigned char cmdReg;
-	unsigned long flags;
-	int port;
-
-	spin_lock_irqsave(&icom_lock, flags);
-	trace(icom_port, "SHUTDOWN", 0);
-
-	/*
-	 * disable all interrupts
-	 */
-	port = icom_port->port;
-	if (port == 0 || port == 1)
-		int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask;
-	else
-		int_mask_tbl[port].global_int_mask = &icom_port->global_reg->int_mask_2;
-
-	if (port < 4) {
-		temp = readl(int_mask_tbl[port].global_int_mask);
-		writel(temp | int_mask_tbl[port].processor_id, int_mask_tbl[port].global_int_mask);
-
-		/* write flush */
-		readl(int_mask_tbl[port].global_int_mask);
-	} else {
-		dev_err(&icom_port->adapter->pci_dev->dev,
-                        "Invalid port assignment\n");
-	}
-	spin_unlock_irqrestore(&icom_lock, flags);
-
-	/*
-	 * disable break condition
-	 */
-	cmdReg = readb(&icom_port->dram->CmdReg);
-	if (cmdReg & CMD_SND_BREAK) {
-		writeb(cmdReg & ~CMD_SND_BREAK, &icom_port->dram->CmdReg);
-	}
-}
-
-static int icom_write(struct uart_port *port)
-{
-	unsigned long data_count;
-	unsigned char cmdReg;
-	unsigned long offset;
-	int temp_tail = port->state->xmit.tail;
-
-	trace(ICOM_PORT, "WRITE", 0);
-
-	if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) &
-	    SA_FLAGS_READY_TO_XMIT) {
-		trace(ICOM_PORT, "WRITE_FULL", 0);
-		return 0;
-	}
-
-	data_count = 0;
-	while ((port->state->xmit.head != temp_tail) &&
-	       (data_count <= XMIT_BUFF_SZ)) {
-
-		ICOM_PORT->xmit_buf[data_count++] =
-		    port->state->xmit.buf[temp_tail];
-
-		temp_tail++;
-		temp_tail &= (UART_XMIT_SIZE - 1);
-	}
-
-	if (data_count) {
-		ICOM_PORT->statStg->xmit[0].flags =
-		    cpu_to_le16(SA_FLAGS_READY_TO_XMIT);
-		ICOM_PORT->statStg->xmit[0].leLength =
-		    cpu_to_le16(data_count);
-		offset =
-		    (unsigned long) &ICOM_PORT->statStg->xmit[0] -
-		    (unsigned long) ICOM_PORT->statStg;
-		*ICOM_PORT->xmitRestart =
-		    cpu_to_le32(ICOM_PORT->statStg_pci + offset);
-		cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-		writeb(cmdReg | CMD_XMIT_RCV_ENABLE,
-		       &ICOM_PORT->dram->CmdReg);
-		writeb(START_XMIT, &ICOM_PORT->dram->StartXmitCmd);
-		trace(ICOM_PORT, "WRITE_START", data_count);
-		/* write flush */
-		readb(&ICOM_PORT->dram->StartXmitCmd);
-	}
-
-	return data_count;
-}
-
-static inline void check_modem_status(struct icom_port *icom_port)
-{
-	static char old_status = 0;
-	char delta_status;
-	unsigned char status;
-
-	spin_lock(&icom_port->uart_port.lock);
-
-	/*modem input register */
-	status = readb(&icom_port->dram->isr);
-	trace(icom_port, "CHECK_MODEM", status);
-	delta_status = status ^ old_status;
-	if (delta_status) {
-		if (delta_status & ICOM_RI)
-			icom_port->uart_port.icount.rng++;
-		if (delta_status & ICOM_DSR)
-			icom_port->uart_port.icount.dsr++;
-		if (delta_status & ICOM_DCD)
-			uart_handle_dcd_change(&icom_port->uart_port,
-					       delta_status & ICOM_DCD);
-		if (delta_status & ICOM_CTS)
-			uart_handle_cts_change(&icom_port->uart_port,
-					       delta_status & ICOM_CTS);
-
-		wake_up_interruptible(&icom_port->uart_port.state->
-				      port.delta_msr_wait);
-		old_status = status;
-	}
-	spin_unlock(&icom_port->uart_port.lock);
-}
-
-static void xmit_interrupt(u16 port_int_reg, struct icom_port *icom_port)
-{
-	unsigned short int count;
-	int i;
-
-	if (port_int_reg & (INT_XMIT_COMPLETED)) {
-		trace(icom_port, "XMIT_COMPLETE", 0);
-
-		/* clear buffer in use bit */
-		icom_port->statStg->xmit[0].flags &=
-			cpu_to_le16(~SA_FLAGS_READY_TO_XMIT);
-
-		count = (unsigned short int)
-			cpu_to_le16(icom_port->statStg->xmit[0].leLength);
-		icom_port->uart_port.icount.tx += count;
-
-		for (i=0; i<count &&
-			!uart_circ_empty(&icom_port->uart_port.state->xmit); i++) {
-
-			icom_port->uart_port.state->xmit.tail++;
-			icom_port->uart_port.state->xmit.tail &=
-				(UART_XMIT_SIZE - 1);
-		}
-
-		if (!icom_write(&icom_port->uart_port))
-			/* activate write queue */
-			uart_write_wakeup(&icom_port->uart_port);
-	} else
-		trace(icom_port, "XMIT_DISABLED", 0);
-}
-
-static void recv_interrupt(u16 port_int_reg, struct icom_port *icom_port)
-{
-	short int count, rcv_buff;
-	struct tty_struct *tty = icom_port->uart_port.state->port.tty;
-	unsigned short int status;
-	struct uart_icount *icount;
-	unsigned long offset;
-	unsigned char flag;
-
-	trace(icom_port, "RCV_COMPLETE", 0);
-	rcv_buff = icom_port->next_rcv;
-
-	status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
-	while (status & SA_FL_RCV_DONE) {
-		int first = -1;
-
-		trace(icom_port, "FID_STATUS", status);
-		count = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].leLength);
-
-		trace(icom_port, "RCV_COUNT", count);
-
-		trace(icom_port, "REAL_COUNT", count);
-
-		offset =
-			cpu_to_le32(icom_port->statStg->rcv[rcv_buff].leBuffer) -
-			icom_port->recv_buf_pci;
-
-		/* Block copy all but the last byte as this may have status */
-		if (count > 0) {
-			first = icom_port->recv_buf[offset];
-			tty_insert_flip_string(tty, icom_port->recv_buf + offset, count - 1);
-		}
-
-		icount = &icom_port->uart_port.icount;
-		icount->rx += count;
-
-		/* Break detect logic */
-		if ((status & SA_FLAGS_FRAME_ERROR)
-		    && first == 0) {
-			status &= ~SA_FLAGS_FRAME_ERROR;
-			status |= SA_FLAGS_BREAK_DET;
-			trace(icom_port, "BREAK_DET", 0);
-		}
-
-		flag = TTY_NORMAL;
-
-		if (status &
-		    (SA_FLAGS_BREAK_DET | SA_FLAGS_PARITY_ERROR |
-		     SA_FLAGS_FRAME_ERROR | SA_FLAGS_OVERRUN)) {
-
-			if (status & SA_FLAGS_BREAK_DET)
-				icount->brk++;
-			if (status & SA_FLAGS_PARITY_ERROR)
-				icount->parity++;
-			if (status & SA_FLAGS_FRAME_ERROR)
-				icount->frame++;
-			if (status & SA_FLAGS_OVERRUN)
-				icount->overrun++;
-
-			/*
-			 * Now check to see if character should be
-			 * ignored, and mask off conditions which
-			 * should be ignored.
-			 */
-			if (status & icom_port->ignore_status_mask) {
-				trace(icom_port, "IGNORE_CHAR", 0);
-				goto ignore_char;
-			}
-
-			status &= icom_port->read_status_mask;
-
-			if (status & SA_FLAGS_BREAK_DET) {
-				flag = TTY_BREAK;
-			} else if (status & SA_FLAGS_PARITY_ERROR) {
-				trace(icom_port, "PARITY_ERROR", 0);
-				flag = TTY_PARITY;
-			} else if (status & SA_FLAGS_FRAME_ERROR)
-				flag = TTY_FRAME;
-
-		}
-
-		tty_insert_flip_char(tty, *(icom_port->recv_buf + offset + count - 1), flag);
-
-		if (status & SA_FLAGS_OVERRUN)
-			/*
-			 * Overrun is special, since it's
-			 * reported immediately, and doesn't
-			 * affect the current character
-			 */
-			tty_insert_flip_char(tty, 0, TTY_OVERRUN);
-ignore_char:
-		icom_port->statStg->rcv[rcv_buff].flags = 0;
-		icom_port->statStg->rcv[rcv_buff].leLength = 0;
-		icom_port->statStg->rcv[rcv_buff].WorkingLength =
-			(unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
-
-		rcv_buff++;
-		if (rcv_buff == NUM_RBUFFS)
-			rcv_buff = 0;
-
-		status = cpu_to_le16(icom_port->statStg->rcv[rcv_buff].flags);
-	}
-	icom_port->next_rcv = rcv_buff;
-	tty_flip_buffer_push(tty);
-}
-
-static void process_interrupt(u16 port_int_reg,
-			      struct icom_port *icom_port)
-{
-
-	spin_lock(&icom_port->uart_port.lock);
-	trace(icom_port, "INTERRUPT", port_int_reg);
-
-	if (port_int_reg & (INT_XMIT_COMPLETED | INT_XMIT_DISABLED))
-		xmit_interrupt(port_int_reg, icom_port);
-
-	if (port_int_reg & INT_RCV_COMPLETED)
-		recv_interrupt(port_int_reg, icom_port);
-
-	spin_unlock(&icom_port->uart_port.lock);
-}
-
-static irqreturn_t icom_interrupt(int irq, void *dev_id)
-{
-	void __iomem * int_reg;
-	u32 adapter_interrupts;
-	u16 port_int_reg;
-	struct icom_adapter *icom_adapter;
-	struct icom_port *icom_port;
-
-	/* find icom_port for this interrupt */
-	icom_adapter = (struct icom_adapter *) dev_id;
-
-	if (icom_adapter->version == ADAPTER_V2) {
-		int_reg = icom_adapter->base_addr + 0x8024;
-
-		adapter_interrupts = readl(int_reg);
-
-		if (adapter_interrupts & 0x00003FFF) {
-			/* port 2 interrupt,  NOTE:  for all ADAPTER_V2, port 2 will be active */
-			icom_port = &icom_adapter->port_info[2];
-			port_int_reg = (u16) adapter_interrupts;
-			process_interrupt(port_int_reg, icom_port);
-			check_modem_status(icom_port);
-		}
-		if (adapter_interrupts & 0x3FFF0000) {
-			/* port 3 interrupt */
-			icom_port = &icom_adapter->port_info[3];
-			if (icom_port->status == ICOM_PORT_ACTIVE) {
-				port_int_reg =
-				    (u16) (adapter_interrupts >> 16);
-				process_interrupt(port_int_reg, icom_port);
-				check_modem_status(icom_port);
-			}
-		}
-
-		/* Clear out any pending interrupts */
-		writel(adapter_interrupts, int_reg);
-
-		int_reg = icom_adapter->base_addr + 0x8004;
-	} else {
-		int_reg = icom_adapter->base_addr + 0x4004;
-	}
-
-	adapter_interrupts = readl(int_reg);
-
-	if (adapter_interrupts & 0x00003FFF) {
-		/* port 0 interrupt, NOTE:  for all adapters, port 0 will be active */
-		icom_port = &icom_adapter->port_info[0];
-		port_int_reg = (u16) adapter_interrupts;
-		process_interrupt(port_int_reg, icom_port);
-		check_modem_status(icom_port);
-	}
-	if (adapter_interrupts & 0x3FFF0000) {
-		/* port 1 interrupt */
-		icom_port = &icom_adapter->port_info[1];
-		if (icom_port->status == ICOM_PORT_ACTIVE) {
-			port_int_reg = (u16) (adapter_interrupts >> 16);
-			process_interrupt(port_int_reg, icom_port);
-			check_modem_status(icom_port);
-		}
-	}
-
-	/* Clear out any pending interrupts */
-	writel(adapter_interrupts, int_reg);
-
-	/* flush the write */
-	adapter_interrupts = readl(int_reg);
-
-	return IRQ_HANDLED;
-}
-
-/*
- * ------------------------------------------------------------------
- * Begin serial-core API
- * ------------------------------------------------------------------
- */
-static unsigned int icom_tx_empty(struct uart_port *port)
-{
-	int ret;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	if (cpu_to_le16(ICOM_PORT->statStg->xmit[0].flags) &
-	    SA_FLAGS_READY_TO_XMIT)
-		ret = TIOCSER_TEMT;
-	else
-		ret = 0;
-
-	spin_unlock_irqrestore(&port->lock, flags);
-	return ret;
-}
-
-static void icom_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
-	unsigned char local_osr;
-
-	trace(ICOM_PORT, "SET_MODEM", 0);
-	local_osr = readb(&ICOM_PORT->dram->osr);
-
-	if (mctrl & TIOCM_RTS) {
-		trace(ICOM_PORT, "RAISE_RTS", 0);
-		local_osr |= ICOM_RTS;
-	} else {
-		trace(ICOM_PORT, "LOWER_RTS", 0);
-		local_osr &= ~ICOM_RTS;
-	}
-
-	if (mctrl & TIOCM_DTR) {
-		trace(ICOM_PORT, "RAISE_DTR", 0);
-		local_osr |= ICOM_DTR;
-	} else {
-		trace(ICOM_PORT, "LOWER_DTR", 0);
-		local_osr &= ~ICOM_DTR;
-	}
-
-	writeb(local_osr, &ICOM_PORT->dram->osr);
-}
-
-static unsigned int icom_get_mctrl(struct uart_port *port)
-{
-	unsigned char status;
-	unsigned int result;
-
-	trace(ICOM_PORT, "GET_MODEM", 0);
-
-	status = readb(&ICOM_PORT->dram->isr);
-
-	result = ((status & ICOM_DCD) ? TIOCM_CAR : 0)
-	    | ((status & ICOM_RI) ? TIOCM_RNG : 0)
-	    | ((status & ICOM_DSR) ? TIOCM_DSR : 0)
-	    | ((status & ICOM_CTS) ? TIOCM_CTS : 0);
-	return result;
-}
-
-static void icom_stop_tx(struct uart_port *port)
-{
-	unsigned char cmdReg;
-
-	trace(ICOM_PORT, "STOP", 0);
-	cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-	writeb(cmdReg | CMD_HOLD_XMIT, &ICOM_PORT->dram->CmdReg);
-}
-
-static void icom_start_tx(struct uart_port *port)
-{
-	unsigned char cmdReg;
-
-	trace(ICOM_PORT, "START", 0);
-	cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-	if ((cmdReg & CMD_HOLD_XMIT) == CMD_HOLD_XMIT)
-		writeb(cmdReg & ~CMD_HOLD_XMIT,
-		       &ICOM_PORT->dram->CmdReg);
-
-	icom_write(port);
-}
-
-static void icom_send_xchar(struct uart_port *port, char ch)
-{
-	unsigned char xdata;
-	int index;
-	unsigned long flags;
-
-	trace(ICOM_PORT, "SEND_XCHAR", ch);
-
-	/* wait .1 sec to send char */
-	for (index = 0; index < 10; index++) {
-		spin_lock_irqsave(&port->lock, flags);
-		xdata = readb(&ICOM_PORT->dram->xchar);
-		if (xdata == 0x00) {
-			trace(ICOM_PORT, "QUICK_WRITE", 0);
-			writeb(ch, &ICOM_PORT->dram->xchar);
-
-			/* flush write operation */
-			xdata = readb(&ICOM_PORT->dram->xchar);
-			spin_unlock_irqrestore(&port->lock, flags);
-			break;
-		}
-		spin_unlock_irqrestore(&port->lock, flags);
-		msleep(10);
-	}
-}
-
-static void icom_stop_rx(struct uart_port *port)
-{
-	unsigned char cmdReg;
-
-	cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-	writeb(cmdReg & ~CMD_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);
-}
-
-static void icom_enable_ms(struct uart_port *port)
-{
-	/* no-op */
-}
-
-static void icom_break(struct uart_port *port, int break_state)
-{
-	unsigned char cmdReg;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	trace(ICOM_PORT, "BREAK", 0);
-	cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-	if (break_state == -1) {
-		writeb(cmdReg | CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);
-	} else {
-		writeb(cmdReg & ~CMD_SND_BREAK, &ICOM_PORT->dram->CmdReg);
-	}
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static int icom_open(struct uart_port *port)
-{
-	int retval;
-
-	kref_get(&ICOM_PORT->adapter->kref);
-	retval = startup(ICOM_PORT);
-
-	if (retval) {
-		kref_put(&ICOM_PORT->adapter->kref, icom_kref_release);
-		trace(ICOM_PORT, "STARTUP_ERROR", 0);
-		return retval;
-	}
-
-	return 0;
-}
-
-static void icom_close(struct uart_port *port)
-{
-	unsigned char cmdReg;
-
-	trace(ICOM_PORT, "CLOSE", 0);
-
-	/* stop receiver */
-	cmdReg = readb(&ICOM_PORT->dram->CmdReg);
-	writeb(cmdReg & (unsigned char) ~CMD_RCV_ENABLE,
-	       &ICOM_PORT->dram->CmdReg);
-
-	shutdown(ICOM_PORT);
-
-	kref_put(&ICOM_PORT->adapter->kref, icom_kref_release);
-}
-
-static void icom_set_termios(struct uart_port *port,
-			     struct ktermios *termios,
-			     struct ktermios *old_termios)
-{
-	int baud;
-	unsigned cflag, iflag;
-	char new_config2;
-	char new_config3 = 0;
-	char tmp_byte;
-	int index;
-	int rcv_buff, xmit_buff;
-	unsigned long offset;
-	unsigned long flags;
-
-	spin_lock_irqsave(&port->lock, flags);
-	trace(ICOM_PORT, "CHANGE_SPEED", 0);
-
-	cflag = termios->c_cflag;
-	iflag = termios->c_iflag;
-
-	new_config2 = ICOM_ACFG_DRIVE1;
-
-	/* byte size and parity */
-	switch (cflag & CSIZE) {
-	case CS5:		/* 5 bits/char */
-		new_config2 |= ICOM_ACFG_5BPC;
-		break;
-	case CS6:		/* 6 bits/char */
-		new_config2 |= ICOM_ACFG_6BPC;
-		break;
-	case CS7:		/* 7 bits/char */
-		new_config2 |= ICOM_ACFG_7BPC;
-		break;
-	case CS8:		/* 8 bits/char */
-		new_config2 |= ICOM_ACFG_8BPC;
-		break;
-	default:
-		break;
-	}
-	if (cflag & CSTOPB) {
-		/* 2 stop bits */
-		new_config2 |= ICOM_ACFG_2STOP_BIT;
-	}
-	if (cflag & PARENB) {
-		/* parity bit enabled */
-		new_config2 |= ICOM_ACFG_PARITY_ENAB;
-		trace(ICOM_PORT, "PARENB", 0);
-	}
-	if (cflag & PARODD) {
-		/* odd parity */
-		new_config2 |= ICOM_ACFG_PARITY_ODD;
-		trace(ICOM_PORT, "PARODD", 0);
-	}
-
-	/* Determine divisor based on baud rate */
-	baud = uart_get_baud_rate(port, termios, old_termios,
-				  icom_acfg_baud[0],
-				  icom_acfg_baud[BAUD_TABLE_LIMIT]);
-	if (!baud)
-		baud = 9600;	/* B0 transition handled in rs_set_termios */
-
-	for (index = 0; index < BAUD_TABLE_LIMIT; index++) {
-		if (icom_acfg_baud[index] == baud) {
-			new_config3 = index;
-			break;
-		}
-	}
-
-	uart_update_timeout(port, cflag, baud);
-
-	/* CTS flow control flag and modem status interrupts */
-	tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));
-	if (cflag & CRTSCTS)
-		tmp_byte |= HDLC_HDW_FLOW;
-	else
-		tmp_byte &= ~HDLC_HDW_FLOW;
-	writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));
-
-	/*
-	 * Set up parity check flag
-	 */
-	ICOM_PORT->read_status_mask = SA_FLAGS_OVERRUN | SA_FL_RCV_DONE;
-	if (iflag & INPCK)
-		ICOM_PORT->read_status_mask |=
-		    SA_FLAGS_FRAME_ERROR | SA_FLAGS_PARITY_ERROR;
-
-	if ((iflag & BRKINT) || (iflag & PARMRK))
-		ICOM_PORT->read_status_mask |= SA_FLAGS_BREAK_DET;
-
-	/*
-	 * Characters to ignore
-	 */
-	ICOM_PORT->ignore_status_mask = 0;
-	if (iflag & IGNPAR)
-		ICOM_PORT->ignore_status_mask |=
-		    SA_FLAGS_PARITY_ERROR | SA_FLAGS_FRAME_ERROR;
-	if (iflag & IGNBRK) {
-		ICOM_PORT->ignore_status_mask |= SA_FLAGS_BREAK_DET;
-		/*
-		 * If we're ignore parity and break indicators, ignore
-		 * overruns too.  (For real raw support).
-		 */
-		if (iflag & IGNPAR)
-			ICOM_PORT->ignore_status_mask |= SA_FLAGS_OVERRUN;
-	}
-
-	/*
-	 * !!! ignore all characters if CREAD is not set
-	 */
-	if ((cflag & CREAD) == 0)
-		ICOM_PORT->ignore_status_mask |= SA_FL_RCV_DONE;
-
-	/* Turn off Receiver to prepare for reset */
-	writeb(CMD_RCV_DISABLE, &ICOM_PORT->dram->CmdReg);
-
-	for (index = 0; index < 10; index++) {
-		if (readb(&ICOM_PORT->dram->PrevCmdReg) == 0x00) {
-			break;
-		}
-	}
-
-	/* clear all current buffers of data */
-	for (rcv_buff = 0; rcv_buff < NUM_RBUFFS; rcv_buff++) {
-		ICOM_PORT->statStg->rcv[rcv_buff].flags = 0;
-		ICOM_PORT->statStg->rcv[rcv_buff].leLength = 0;
-		ICOM_PORT->statStg->rcv[rcv_buff].WorkingLength =
-		    (unsigned short int) cpu_to_le16(RCV_BUFF_SZ);
-	}
-
-	for (xmit_buff = 0; xmit_buff < NUM_XBUFFS; xmit_buff++) {
-		ICOM_PORT->statStg->xmit[xmit_buff].flags = 0;
-	}
-
-	/* activate changes and start xmit and receiver here */
-	/* Enable the receiver */
-	writeb(new_config3, &(ICOM_PORT->dram->async_config3));
-	writeb(new_config2, &(ICOM_PORT->dram->async_config2));
-	tmp_byte = readb(&(ICOM_PORT->dram->HDLCConfigReg));
-	tmp_byte |= HDLC_PPP_PURE_ASYNC | HDLC_FF_FILL;
-	writeb(tmp_byte, &(ICOM_PORT->dram->HDLCConfigReg));
-	writeb(0x04, &(ICOM_PORT->dram->FlagFillIdleTimer));	/* 0.5 seconds */
-	writeb(0xFF, &(ICOM_PORT->dram->ier));	/* enable modem signal interrupts */
-
-	/* reset processor */
-	writeb(CMD_RESTART, &ICOM_PORT->dram->CmdReg);
-
-	for (index = 0; index < 10; index++) {
-		if (readb(&ICOM_PORT->dram->CmdReg) == 0x00) {
-			break;
-		}
-	}
-
-	/* Enable Transmitter and Reciever */
-	offset =
-	    (unsigned long) &ICOM_PORT->statStg->rcv[0] -
-	    (unsigned long) ICOM_PORT->statStg;
-	writel(ICOM_PORT->statStg_pci + offset,
-	       &ICOM_PORT->dram->RcvStatusAddr);
-	ICOM_PORT->next_rcv = 0;
-	ICOM_PORT->put_length = 0;
-	*ICOM_PORT->xmitRestart = 0;
-	writel(ICOM_PORT->xmitRestart_pci,
-	       &ICOM_PORT->dram->XmitStatusAddr);
-	trace(ICOM_PORT, "XR_ENAB", 0);
-	writeb(CMD_XMIT_RCV_ENABLE, &ICOM_PORT->dram->CmdReg);
-
-	spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static const char *icom_type(struct uart_port *port)
-{
-	return "icom";
-}
-
-static void icom_release_port(struct uart_port *port)
-{
-}
-
-static int icom_request_port(struct uart_port *port)
-{
-	return 0;
-}
-
-static void icom_config_port(struct uart_port *port, int flags)
-{
-	port->type = PORT_ICOM;
-}
-
-static struct uart_ops icom_ops = {
-	.tx_empty = icom_tx_empty,
-	.set_mctrl = icom_set_mctrl,
-	.get_mctrl = icom_get_mctrl,
-	.stop_tx = icom_stop_tx,
-	.start_tx = icom_start_tx,
-	.send_xchar = icom_send_xchar,
-	.stop_rx = icom_stop_rx,
-	.enable_ms = icom_enable_ms,
-	.break_ctl = icom_break,
-	.startup = icom_open,
-	.shutdown = icom_close,
-	.set_termios = icom_set_termios,
-	.type = icom_type,
-	.release_port = icom_release_port,
-	.request_port = icom_request_port,
-	.config_port = icom_config_port,
-};
-
-#define ICOM_CONSOLE NULL
-
-static struct uart_driver icom_uart_driver = {
-	.owner = THIS_MODULE,
-	.driver_name = ICOM_DRIVER_NAME,
-	.dev_name = "ttyA",
-	.major = ICOM_MAJOR,
-	.minor = ICOM_MINOR_START,
-	.nr = NR_PORTS,
-	.cons = ICOM_CONSOLE,
-};
-
-static int __devinit icom_init_ports(struct icom_adapter *icom_adapter)
-{
-	u32 subsystem_id = icom_adapter->subsystem_id;
-	int i;
-	struct icom_port *icom_port;
-
-	if (icom_adapter->version == ADAPTER_V1) {
-		icom_adapter->numb_ports = 2;
-
-		for (i = 0; i < 2; i++) {
-			icom_port = &icom_adapter->port_info[i];
-			icom_port->port = i;
-			icom_port->status = ICOM_PORT_ACTIVE;
-			icom_port->imbed_modem = ICOM_UNKNOWN;
-		}
-	} else {
-		if (subsystem_id == PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL) {
-			icom_adapter->numb_ports = 4;
-
-			for (i = 0; i < 4; i++) {
-				icom_port = &icom_adapter->port_info[i];
-
-				icom_port->port = i;
-				icom_port->status = ICOM_PORT_ACTIVE;
-				icom_port->imbed_modem = ICOM_IMBED_MODEM;
-			}
-		} else {
-			icom_adapter->numb_ports = 4;
-
-			icom_adapter->port_info[0].port = 0;
-			icom_adapter->port_info[0].status = ICOM_PORT_ACTIVE;
-
-			if (subsystem_id ==
-			    PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM) {
-				icom_adapter->port_info[0].imbed_modem = ICOM_IMBED_MODEM;
-			} else {
-				icom_adapter->port_info[0].imbed_modem = ICOM_RVX;
-			}
-
-			icom_adapter->port_info[1].status = ICOM_PORT_OFF;
-
-			icom_adapter->port_info[2].port = 2;
-			icom_adapter->port_info[2].status = ICOM_PORT_ACTIVE;
-			icom_adapter->port_info[2].imbed_modem = ICOM_RVX;
-			icom_adapter->port_info[3].status = ICOM_PORT_OFF;
-		}
-	}
-
-	return 0;
-}
-
-static void icom_port_active(struct icom_port *icom_port, struct icom_adapter *icom_adapter, int port_num)
-{
-	if (icom_adapter->version == ADAPTER_V1) {
-		icom_port->global_reg = icom_adapter->base_addr + 0x4000;
-		icom_port->int_reg = icom_adapter->base_addr +
-		    0x4004 + 2 - 2 * port_num;
-	} else {
-		icom_port->global_reg = icom_adapter->base_addr + 0x8000;
-		if (icom_port->port < 2)
-			icom_port->int_reg = icom_adapter->base_addr +
-			    0x8004 + 2 - 2 * icom_port->port;
-		else
-			icom_port->int_reg = icom_adapter->base_addr +
-			    0x8024 + 2 - 2 * (icom_port->port - 2);
-	}
-}
-static int __devinit icom_load_ports(struct icom_adapter *icom_adapter)
-{
-	struct icom_port *icom_port;
-	int port_num;
-
-	for (port_num = 0; port_num < icom_adapter->numb_ports; port_num++) {
-
-		icom_port = &icom_adapter->port_info[port_num];
-
-		if (icom_port->status == ICOM_PORT_ACTIVE) {
-			icom_port_active(icom_port, icom_adapter, port_num);
-			icom_port->dram = icom_adapter->base_addr +
-					0x2000 * icom_port->port;
-
-			icom_port->adapter = icom_adapter;
-
-			/* get port memory */
-			if (get_port_memory(icom_port) != 0) {
-				dev_err(&icom_port->adapter->pci_dev->dev,
-					"Memory allocation for port FAILED\n");
-			}
-		}
-	}
-	return 0;
-}
-
-static int __devinit icom_alloc_adapter(struct icom_adapter
-					**icom_adapter_ref)
-{
-	int adapter_count = 0;
-	struct icom_adapter *icom_adapter;
-	struct icom_adapter *cur_adapter_entry;
-	struct list_head *tmp;
-
-	icom_adapter = (struct icom_adapter *)
-	    kzalloc(sizeof(struct icom_adapter), GFP_KERNEL);
-
-	if (!icom_adapter) {
-		return -ENOMEM;
-	}
-
-	list_for_each(tmp, &icom_adapter_head) {
-		cur_adapter_entry =
-		    list_entry(tmp, struct icom_adapter,
-			       icom_adapter_entry);
-		if (cur_adapter_entry->index != adapter_count) {
-			break;
-		}
-		adapter_count++;
-	}
-
-	icom_adapter->index = adapter_count;
-	list_add_tail(&icom_adapter->icom_adapter_entry, tmp);
-
-	*icom_adapter_ref = icom_adapter;
-	return 0;
-}
-
-static void icom_free_adapter(struct icom_adapter *icom_adapter)
-{
-	list_del(&icom_adapter->icom_adapter_entry);
-	kfree(icom_adapter);
-}
-
-static void icom_remove_adapter(struct icom_adapter *icom_adapter)
-{
-	struct icom_port *icom_port;
-	int index;
-
-	for (index = 0; index < icom_adapter->numb_ports; index++) {
-		icom_port = &icom_adapter->port_info[index];
-
-		if (icom_port->status == ICOM_PORT_ACTIVE) {
-			dev_info(&icom_adapter->pci_dev->dev,
-				 "Device removed\n");
-
-			uart_remove_one_port(&icom_uart_driver,
-					     &icom_port->uart_port);
-
-			/* be sure that DTR and RTS are dropped */
-			writeb(0x00, &icom_port->dram->osr);
-
-			/* Wait 0.1 Sec for simple Init to complete */
-			msleep(100);
-
-			/* Stop proccessor */
-			stop_processor(icom_port);
-
-			free_port_memory(icom_port);
-		}
-	}
-
-	free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
-	iounmap(icom_adapter->base_addr);
-	pci_release_regions(icom_adapter->pci_dev);
-	icom_free_adapter(icom_adapter);
-}
-
-static void icom_kref_release(struct kref *kref)
-{
-	struct icom_adapter *icom_adapter;
-
-	icom_adapter = to_icom_adapter(kref);
-	icom_remove_adapter(icom_adapter);
-}
-
-static int __devinit icom_probe(struct pci_dev *dev,
-				const struct pci_device_id *ent)
-{
-	int index;
-	unsigned int command_reg;
-	int retval;
-	struct icom_adapter *icom_adapter;
-	struct icom_port *icom_port;
-
-	retval = pci_enable_device(dev);
-	if (retval) {
-		dev_err(&dev->dev, "Device enable FAILED\n");
-		return retval;
-	}
-
-	if ( (retval = pci_request_regions(dev, "icom"))) {
-		 dev_err(&dev->dev, "pci_request_regions FAILED\n");
-		 pci_disable_device(dev);
-		 return retval;
-	 }
-
-	pci_set_master(dev);
-
-	if ( (retval = pci_read_config_dword(dev, PCI_COMMAND, &command_reg))) {
-		dev_err(&dev->dev, "PCI Config read FAILED\n");
-		return retval;
-	}
-
-	pci_write_config_dword(dev, PCI_COMMAND,
-		command_reg | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER
- 		| PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
-
-	if (ent->driver_data == ADAPTER_V1) {
-		pci_write_config_dword(dev, 0x44, 0x8300830A);
-	} else {
-		pci_write_config_dword(dev, 0x44, 0x42004200);
-		pci_write_config_dword(dev, 0x48, 0x42004200);
-	}
-
-
-	retval = icom_alloc_adapter(&icom_adapter);
-	if (retval) {
-		 dev_err(&dev->dev, "icom_alloc_adapter FAILED\n");
-		 retval = -EIO;
-		 goto probe_exit0;
-	}
-
-	icom_adapter->base_addr_pci = pci_resource_start(dev, 0);
-	icom_adapter->pci_dev = dev;
-	icom_adapter->version = ent->driver_data;
-	icom_adapter->subsystem_id = ent->subdevice;
-
-
-	retval = icom_init_ports(icom_adapter);
-	if (retval) {
-		dev_err(&dev->dev, "Port configuration failed\n");
-		goto probe_exit1;
-	}
-
-	icom_adapter->base_addr = pci_ioremap_bar(dev, 0);
-
-	if (!icom_adapter->base_addr)
-		goto probe_exit1;
-
-	 /* save off irq and request irq line */
-	 if ( (retval = request_irq(dev->irq, icom_interrupt,
-				   IRQF_DISABLED | IRQF_SHARED, ICOM_DRIVER_NAME,
-				   (void *) icom_adapter))) {
-		  goto probe_exit2;
-	 }
-
-	retval = icom_load_ports(icom_adapter);
-
-	for (index = 0; index < icom_adapter->numb_ports; index++) {
-		icom_port = &icom_adapter->port_info[index];
-
-		if (icom_port->status == ICOM_PORT_ACTIVE) {
-			icom_port->uart_port.irq = icom_port->adapter->pci_dev->irq;
-			icom_port->uart_port.type = PORT_ICOM;
-			icom_port->uart_port.iotype = UPIO_MEM;
-			icom_port->uart_port.membase =
-					       (char *) icom_adapter->base_addr_pci;
-			icom_port->uart_port.fifosize = 16;
-			icom_port->uart_port.ops = &icom_ops;
-			icom_port->uart_port.line =
-		        icom_port->port + icom_adapter->index * 4;
-			if (uart_add_one_port (&icom_uart_driver, &icom_port->uart_port)) {
-				icom_port->status = ICOM_PORT_OFF;
-				dev_err(&dev->dev, "Device add failed\n");
-			 } else
-				dev_info(&dev->dev, "Device added\n");
-		}
-	}
-
-	kref_init(&icom_adapter->kref);
-	return 0;
-
-probe_exit2:
-	iounmap(icom_adapter->base_addr);
-probe_exit1:
-	icom_free_adapter(icom_adapter);
-
-probe_exit0:
-	pci_release_regions(dev);
-	pci_disable_device(dev);
-
-	return retval;
-}
-
-static void __devexit icom_remove(struct pci_dev *dev)
-{
-	struct icom_adapter *icom_adapter;
-	struct list_head *tmp;
-
-	list_for_each(tmp, &icom_adapter_head) {
-		icom_adapter = list_entry(tmp, struct icom_adapter,
-					  icom_adapter_entry);
-		if (icom_adapter->pci_dev == dev) {
-			kref_put(&icom_adapter->kref, icom_kref_release);
-			return;
-		}
-	}
-
-	dev_err(&dev->dev, "Unable to find device to remove\n");
-}
-
-static struct pci_driver icom_pci_driver = {
-	.name = ICOM_DRIVER_NAME,
-	.id_table = icom_pci_table,
-	.probe = icom_probe,
-	.remove = __devexit_p(icom_remove),
-};
-
-static int __init icom_init(void)
-{
-	int ret;
-
-	spin_lock_init(&icom_lock);
-
-	ret = uart_register_driver(&icom_uart_driver);
-	if (ret)
-		return ret;
-
-	ret = pci_register_driver(&icom_pci_driver);
-
-	if (ret < 0)
-		uart_unregister_driver(&icom_uart_driver);
-
-	return ret;
-}
-
-static void __exit icom_exit(void)
-{
-	pci_unregister_driver(&icom_pci_driver);
-	uart_unregister_driver(&icom_uart_driver);
-}
-
-module_init(icom_init);
-module_exit(icom_exit);
-
-MODULE_AUTHOR("Michael Anderson <mjanders@us.ibm.com>");
-MODULE_DESCRIPTION("IBM iSeries Serial IOA driver");
-MODULE_SUPPORTED_DEVICE
-    ("IBM iSeries 2745, 2771, 2772, 2742, 2793 and 2805 Communications adapters");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE("icom_call_setup.bin");
-MODULE_FIRMWARE("icom_res_dce.bin");
-MODULE_FIRMWARE("icom_asc.bin");