summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 21:55:47 -0700
committerLinus Torvalds <torvalds@woody.linux-foundation.org>2007-10-11 21:55:47 -0700
commite86908614f2c7fec401827e5cefd7a6ea9407f85 (patch)
treefcb5d9e52422b37bdaf0e647126ebdfc1680f162 /drivers/serial
parent547307420931344a868275bd7ea7a30f117a15a9 (diff)
parent9b4b8feb962f4b3e74768b7205f1f8f6cce87238 (diff)
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (408 commits) [POWERPC] Add memchr() to the bootwrapper [POWERPC] Implement logging of unhandled signals [POWERPC] Add legacy serial support for OPB with flattened device tree [POWERPC] Use 1TB segments [POWERPC] XilinxFB: Allow fixed framebuffer base address [POWERPC] XilinxFB: Add support for custom screen resolution [POWERPC] XilinxFB: Use pdata to pass around framebuffer parameters [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci [POWERPC] 4xx: Kilauea defconfig file [POWERPC] 4xx: Kilauea DTS [POWERPC] 4xx: Add AMCC Kilauea eval board support to platforms/40x [POWERPC] 4xx: Add AMCC 405EX support to cputable.c [POWERPC] Adjust TASK_SIZE on ppc32 systems to 3GB that are capable [POWERPC] Use PAGE_OFFSET to tell if an address is user/kernel in SW TLB handlers [POWERPC] 85xx: Enable FP emulation in MPC8560 ADS defconfig [POWERPC] 85xx: Killed <asm/mpc85xx.h> [POWERPC] 85xx: Add cpm nodes for 8541/8555 CDS [POWERPC] 85xx: Convert mpc8560ads to the new CPM binding. [POWERPC] mpc8272ads: Remove muram from the CPM reg property. [POWERPC] Make clockevents work on PPC601 processors ... Fixed up conflict in Documentation/powerpc/booting-without-of.txt manually.
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/Kconfig25
-rw-r--r--drivers/serial/cpm_uart/cpm_uart.h48
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c539
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.c18
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm1.h16
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c24
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.h16
-rw-r--r--drivers/serial/mpc52xx_uart.c2
-rw-r--r--drivers/serial/pmac_zilog.c22
-rw-r--r--drivers/serial/uartlite.c286
10 files changed, 735 insertions, 261 deletions
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 81b52b7cca21..d6ae38e55d01 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -986,6 +986,31 @@ config SERIAL_PMACZILOG
PowerMac machines.
Say Y or M if you want to be able to these serial ports.
+config SERIAL_PMACZILOG_TTYS
+ bool "Use ttySn device nodes for Zilog z85c30"
+ depends on SERIAL_PMACZILOG
+ help
+ The pmac_zilog driver for the z85C30 chip on many powermacs
+ historically used the device numbers for /dev/ttySn. The
+ 8250 serial port driver also uses these numbers, which means
+ the two drivers being unable to coexist; you could not use
+ both z85C30 and 8250 type ports at the same time.
+
+ If this option is not selected, the pmac_zilog driver will
+ use the device numbers allocated for /dev/ttyPZn. This allows
+ the pmac_zilog and 8250 drivers to co-exist, but may cause
+ existing userspace setups to break. Programs that need to
+ access the built-in serial ports on powermacs will need to
+ be reconfigured to use /dev/ttyPZn instead of /dev/ttySn.
+
+ If you enable this option, any z85c30 ports in the system will
+ be registered as ttyS0 onwards as in the past, and you will be
+ unable to use the 8250 module for PCMCIA or other 16C550-style
+ UARTs.
+
+ Say N unless you need the z85c30 ports on your powermac
+ to appear as /dev/ttySn.
+
config SERIAL_PMACZILOG_CONSOLE
bool "Console on PowerMac z85c30 serial port"
depends on SERIAL_PMACZILOG=y
diff --git a/drivers/serial/cpm_uart/cpm_uart.h b/drivers/serial/cpm_uart/cpm_uart.h
index a8f894c78194..32b9737759c4 100644
--- a/drivers/serial/cpm_uart/cpm_uart.h
+++ b/drivers/serial/cpm_uart/cpm_uart.h
@@ -56,21 +56,21 @@ struct uart_cpm_port {
u16 rx_fifosize;
u16 tx_nrfifos;
u16 tx_fifosize;
- smc_t *smcp;
- smc_uart_t *smcup;
- scc_t *sccp;
- scc_uart_t *sccup;
- volatile cbd_t *rx_bd_base;
- volatile cbd_t *rx_cur;
- volatile cbd_t *tx_bd_base;
- volatile cbd_t *tx_cur;
+ smc_t __iomem *smcp;
+ smc_uart_t __iomem *smcup;
+ scc_t __iomem *sccp;
+ scc_uart_t __iomem *sccup;
+ cbd_t __iomem *rx_bd_base;
+ cbd_t __iomem *rx_cur;
+ cbd_t __iomem *tx_bd_base;
+ cbd_t __iomem *tx_cur;
unsigned char *tx_buf;
unsigned char *rx_buf;
u32 flags;
void (*set_lineif)(struct uart_cpm_port *);
u8 brg;
uint dp_addr;
- void *mem_addr;
+ void *mem_addr;
dma_addr_t dma_addr;
u32 mem_size;
/* helpers */
@@ -80,14 +80,18 @@ struct uart_cpm_port {
int is_portb;
/* wait on close if needed */
int wait_closing;
+ /* value to combine with opcode to form cpm command */
+ u32 command;
};
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
extern int cpm_uart_port_map[UART_NR];
+#endif
extern int cpm_uart_nr;
extern struct uart_cpm_port cpm_uart_ports[UART_NR];
/* these are located in their respective files */
-void cpm_line_cr_cmd(int line, int cmd);
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd);
int cpm_uart_init_portdesc(void);
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con);
void cpm_uart_freebuf(struct uart_cpm_port *pinfo);
@@ -102,34 +106,36 @@ void scc4_lineif(struct uart_cpm_port *pinfo);
/*
virtual to phys transtalion
*/
-static inline unsigned long cpu2cpm_addr(void* addr, struct uart_cpm_port *pinfo)
+static inline unsigned long cpu2cpm_addr(void *addr,
+ struct uart_cpm_port *pinfo)
{
int offset;
u32 val = (u32)addr;
+ u32 mem = (u32)pinfo->mem_addr;
/* sane check */
- if (likely((val >= (u32)pinfo->mem_addr)) &&
- (val<((u32)pinfo->mem_addr + pinfo->mem_size))) {
- offset = val - (u32)pinfo->mem_addr;
- return pinfo->dma_addr+offset;
+ if (likely(val >= mem && val < mem + pinfo->mem_size)) {
+ offset = val - mem;
+ return pinfo->dma_addr + offset;
}
/* something nasty happened */
BUG();
return 0;
}
-static inline void *cpm2cpu_addr(unsigned long addr, struct uart_cpm_port *pinfo)
+static inline void *cpm2cpu_addr(unsigned long addr,
+ struct uart_cpm_port *pinfo)
{
int offset;
u32 val = addr;
+ u32 dma = (u32)pinfo->dma_addr;
/* sane check */
- if (likely((val >= pinfo->dma_addr) &&
- (val<(pinfo->dma_addr + pinfo->mem_size)))) {
- offset = val - (u32)pinfo->dma_addr;
- return (void*)(pinfo->mem_addr+offset);
+ if (likely(val >= dma && val < dma + pinfo->mem_size)) {
+ offset = val - dma;
+ return pinfo->mem_addr + offset;
}
/* something nasty happened */
BUG();
- return 0;
+ return NULL;
}
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cefde58dbad2..b5e4478de0e3 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -10,7 +10,7 @@
* Maintainer: Kumar Gala (galak@kernel.crashing.org) (CPM2)
* Pantelis Antoniou (panto@intracom.gr) (CPM1)
*
- * Copyright (C) 2004 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004, 2007 Freescale Semiconductor, Inc.
* (C) 2004 Intracom, S.A.
* (C) 2005-2006 MontaVista Software, Inc.
* Vitaly Bordug <vbordug@ru.mvista.com>
@@ -47,6 +47,11 @@
#include <asm/irq.h>
#include <asm/delay.h>
#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+#include <linux/of_platform.h>
+#endif
#if defined(CONFIG_SERIAL_CPM_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
@@ -57,12 +62,6 @@
#include "cpm_uart.h"
-/***********************************************************************/
-
-/* Track which ports are configured as uarts */
-int cpm_uart_port_map[UART_NR];
-/* How many ports did we config as uarts */
-int cpm_uart_nr = 0;
/**************************************************************/
@@ -73,6 +72,11 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo);
/**************************************************************/
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
+/* Track which ports are configured as uarts */
+int cpm_uart_port_map[UART_NR];
+/* How many ports did we config as uarts */
+int cpm_uart_nr;
/* Place-holder for board-specific stuff */
struct platform_device* __attribute__ ((weak)) __init
@@ -119,6 +123,7 @@ static int cpm_uart_id2nr(int id)
/* not found or invalid argument */
return -1;
}
+#endif
/*
* Check, if transmit buffers are processed
@@ -126,14 +131,14 @@ static int cpm_uart_id2nr(int id)
static unsigned int cpm_uart_tx_empty(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile cbd_t *bdp = pinfo->tx_bd_base;
+ cbd_t __iomem *bdp = pinfo->tx_bd_base;
int ret = 0;
while (1) {
- if (bdp->cbd_sc & BD_SC_READY)
+ if (in_be16(&bdp->cbd_sc) & BD_SC_READY)
break;
- if (bdp->cbd_sc & BD_SC_WRAP) {
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP) {
ret = TIOCSER_TEMT;
break;
}
@@ -162,15 +167,15 @@ static unsigned int cpm_uart_get_mctrl(struct uart_port *port)
static void cpm_uart_stop_tx(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile smc_t *smcp = pinfo->smcp;
- volatile scc_t *sccp = pinfo->sccp;
+ smc_t __iomem *smcp = pinfo->smcp;
+ scc_t __iomem *sccp = pinfo->sccp;
pr_debug("CPM uart[%d]:stop tx\n", port->line);
if (IS_SMC(pinfo))
- smcp->smc_smcm &= ~SMCM_TX;
+ clrbits8(&smcp->smc_smcm, SMCM_TX);
else
- sccp->scc_sccm &= ~UART_SCCM_TX;
+ clrbits16(&sccp->scc_sccm, UART_SCCM_TX);
}
/*
@@ -179,24 +184,24 @@ static void cpm_uart_stop_tx(struct uart_port *port)
static void cpm_uart_start_tx(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile smc_t *smcp = pinfo->smcp;
- volatile scc_t *sccp = pinfo->sccp;
+ smc_t __iomem *smcp = pinfo->smcp;
+ scc_t __iomem *sccp = pinfo->sccp;
pr_debug("CPM uart[%d]:start tx\n", port->line);
if (IS_SMC(pinfo)) {
- if (smcp->smc_smcm & SMCM_TX)
+ if (in_8(&smcp->smc_smcm) & SMCM_TX)
return;
} else {
- if (sccp->scc_sccm & UART_SCCM_TX)
+ if (in_be16(&sccp->scc_sccm) & UART_SCCM_TX)
return;
}
if (cpm_uart_tx_pump(port) != 0) {
if (IS_SMC(pinfo)) {
- smcp->smc_smcm |= SMCM_TX;
+ setbits8(&smcp->smc_smcm, SMCM_TX);
} else {
- sccp->scc_sccm |= UART_SCCM_TX;
+ setbits16(&sccp->scc_sccm, UART_SCCM_TX);
}
}
}
@@ -207,15 +212,15 @@ static void cpm_uart_start_tx(struct uart_port *port)
static void cpm_uart_stop_rx(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile smc_t *smcp = pinfo->smcp;
- volatile scc_t *sccp = pinfo->sccp;
+ smc_t __iomem *smcp = pinfo->smcp;
+ scc_t __iomem *sccp = pinfo->sccp;
pr_debug("CPM uart[%d]:stop rx\n", port->line);
if (IS_SMC(pinfo))
- smcp->smc_smcm &= ~SMCM_RX;
+ clrbits8(&smcp->smc_smcm, SMCM_RX);
else
- sccp->scc_sccm &= ~UART_SCCM_RX;
+ clrbits16(&sccp->scc_sccm, UART_SCCM_RX);
}
/*
@@ -232,15 +237,14 @@ static void cpm_uart_enable_ms(struct uart_port *port)
static void cpm_uart_break_ctl(struct uart_port *port, int break_state)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- int line = pinfo - cpm_uart_ports;
pr_debug("CPM uart[%d]:break ctrl, break_state: %d\n", port->line,
break_state);
if (break_state)
- cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
else
- cpm_line_cr_cmd(line, CPM_CR_RESTART_TX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
}
/*
@@ -259,10 +263,11 @@ static void cpm_uart_int_tx(struct uart_port *port)
static void cpm_uart_int_rx(struct uart_port *port)
{
int i;
- unsigned char ch, *cp;
+ unsigned char ch;
+ u8 *cp;
struct tty_struct *tty = port->info->tty;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile cbd_t *bdp;
+ cbd_t __iomem *bdp;
u16 status;
unsigned int flg;
@@ -274,13 +279,13 @@ static void cpm_uart_int_rx(struct uart_port *port)
bdp = pinfo->rx_cur;
for (;;) {
/* get status */
- status = bdp->cbd_sc;
+ status = in_be16(&bdp->cbd_sc);
/* If this one is empty, return happy */
if (status & BD_SC_EMPTY)
break;
/* get number of characters, and check spce in flip-buffer */
- i = bdp->cbd_datlen;
+ i = in_be16(&bdp->cbd_datlen);
/* If we have not enough room in tty flip buffer, then we try
* later, which will be the next rx-interrupt or a timeout
@@ -291,7 +296,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
}
/* get pointer */
- cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+ cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
/* loop through the buffer */
while (i-- > 0) {
@@ -311,10 +316,11 @@ static void cpm_uart_int_rx(struct uart_port *port)
} /* End while (i--) */
/* This BD is ready to be used again. Clear status. get next */
- bdp->cbd_sc &= ~(BD_SC_BR | BD_SC_FR | BD_SC_PR | BD_SC_OV | BD_SC_ID);
- bdp->cbd_sc |= BD_SC_EMPTY;
+ clrbits16(&bdp->cbd_sc, BD_SC_BR | BD_SC_FR | BD_SC_PR |
+ BD_SC_OV | BD_SC_ID);
+ setbits16(&bdp->cbd_sc, BD_SC_EMPTY);
- if (bdp->cbd_sc & BD_SC_WRAP)
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = pinfo->rx_bd_base;
else
bdp++;
@@ -322,7 +328,7 @@ static void cpm_uart_int_rx(struct uart_port *port)
} /* End for (;;) */
/* Write back buffer pointer */
- pinfo->rx_cur = (volatile cbd_t *) bdp;
+ pinfo->rx_cur = bdp;
/* activate BH processing */
tty_flip_buffer_push(tty);
@@ -376,14 +382,14 @@ static irqreturn_t cpm_uart_int(int irq, void *data)
u8 events;
struct uart_port *port = (struct uart_port *)data;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile smc_t *smcp = pinfo->smcp;
- volatile scc_t *sccp = pinfo->sccp;
+ smc_t __iomem *smcp = pinfo->smcp;
+ scc_t __iomem *sccp = pinfo->sccp;
pr_debug("CPM uart[%d]:IRQ\n", port->line);
if (IS_SMC(pinfo)) {
- events = smcp->smc_smce;
- smcp->smc_smce = events;
+ events = in_8(&smcp->smc_smce);
+ out_8(&smcp->smc_smce, events);
if (events & SMCM_BRKE)
uart_handle_break(port);
if (events & SMCM_RX)
@@ -391,8 +397,8 @@ static irqreturn_t cpm_uart_int(int irq, void *data)
if (events & SMCM_TX)
cpm_uart_int_tx(port);
} else {
- events = sccp->scc_scce;
- sccp->scc_scce = events;
+ events = in_be16(&sccp->scc_scce);
+ out_be16(&sccp->scc_scce, events);
if (events & UART_SCCM_BRKE)
uart_handle_break(port);
if (events & UART_SCCM_RX)
@@ -407,7 +413,6 @@ static int cpm_uart_startup(struct uart_port *port)
{
int retval;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- int line = pinfo - cpm_uart_ports;
pr_debug("CPM uart[%d]:startup\n", port->line);
@@ -418,15 +423,15 @@ static int cpm_uart_startup(struct uart_port *port)
/* Startup rx-int */
if (IS_SMC(pinfo)) {
- pinfo->smcp->smc_smcm |= SMCM_RX;
- pinfo->smcp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+ setbits8(&pinfo->smcp->smc_smcm, SMCM_RX);
+ setbits16(&pinfo->smcp->smc_smcmr, (SMCMR_REN | SMCMR_TEN));
} else {
- pinfo->sccp->scc_sccm |= UART_SCCM_RX;
- pinfo->sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ setbits16(&pinfo->sccp->scc_sccm, UART_SCCM_RX);
+ setbits32(&pinfo->sccp->scc_gsmrl, (SCC_GSMRL_ENR | SCC_GSMRL_ENT));
}
if (!(pinfo->flags & FLAG_CONSOLE))
- cpm_line_cr_cmd(line,CPM_CR_INIT_TRX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
return 0;
}
@@ -442,7 +447,6 @@ inline void cpm_uart_wait_until_send(struct uart_cpm_port *pinfo)
static void cpm_uart_shutdown(struct uart_port *port)
{
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- int line = pinfo - cpm_uart_ports;
pr_debug("CPM uart[%d]:shutdown\n", port->line);
@@ -462,20 +466,20 @@ static void cpm_uart_shutdown(struct uart_port *port)
/* Stop uarts */
if (IS_SMC(pinfo)) {
- volatile smc_t *smcp = pinfo->smcp;
- smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
- smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
+ smc_t __iomem *smcp = pinfo->smcp;
+ clrbits16(&smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
+ clrbits8(&smcp->smc_smcm, SMCM_RX | SMCM_TX);
} else {
- volatile scc_t *sccp = pinfo->sccp;
- sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
- sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
+ scc_t __iomem *sccp = pinfo->sccp;
+ clrbits32(&sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ clrbits16(&sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
}
/* Shut them really down and reinit buffer descriptors */
if (IS_SMC(pinfo))
- cpm_line_cr_cmd(line, CPM_CR_STOP_TX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
else
- cpm_line_cr_cmd(line, CPM_CR_GRA_STOP_TX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_GRA_STOP_TX);
cpm_uart_initbd(pinfo);
}
@@ -490,8 +494,8 @@ static void cpm_uart_set_termios(struct uart_port *port,
u16 cval, scval, prev_mode;
int bits, sbits;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
- volatile smc_t *smcp = pinfo->smcp;
- volatile scc_t *sccp = pinfo->sccp;
+ smc_t __iomem *smcp = pinfo->smcp;
+ scc_t __iomem *sccp = pinfo->sccp;
pr_debug("CPM uart[%d]:set_termios\n", port->line);
@@ -586,16 +590,15 @@ static void cpm_uart_set_termios(struct uart_port *port,
* enables, because we want to put them back if they were
* present.
*/
- prev_mode = smcp->smc_smcmr;
- smcp->smc_smcmr = smcr_mk_clen(bits) | cval | SMCMR_SM_UART;
- smcp->smc_smcmr |= (prev_mode & (SMCMR_REN | SMCMR_TEN));
+ prev_mode = in_be16(&smcp->smc_smcmr);
+ out_be16(&smcp->smc_smcmr, smcr_mk_clen(bits) | cval | SMCMR_SM_UART);
+ setbits16(&smcp->smc_smcmr, (prev_mode & (SMCMR_REN | SMCMR_TEN)));
} else {
- sccp->scc_psmr = (sbits << 12) | scval;
+ out_be16(&sccp->scc_psmr, (sbits << 12) | scval);
}
cpm_set_brg(pinfo->brg - 1, baud);
spin_unlock_irqrestore(&port->lock, flags);
-
}
static const char *cpm_uart_type(struct uart_port *port)
@@ -629,8 +632,8 @@ static int cpm_uart_verify_port(struct uart_port *port,
*/
static int cpm_uart_tx_pump(struct uart_port *port)
{
- volatile cbd_t *bdp;
- unsigned char *p;
+ cbd_t __iomem *bdp;
+ u8 *p;
int count;
struct uart_cpm_port *pinfo = (struct uart_cpm_port *)port;
struct circ_buf *xmit = &port->info->xmit;
@@ -640,13 +643,14 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
- p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+ p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
*p++ = port->x_char;
- bdp->cbd_datlen = 1;
- bdp->cbd_sc |= BD_SC_READY;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
/* Get next BD. */
- if (bdp->cbd_sc & BD_SC_WRAP)
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = pinfo->tx_bd_base;
else
bdp++;
@@ -665,9 +669,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
/* Pick next descriptor and fill from buffer */
bdp = pinfo->tx_cur;
- while (!(bdp->cbd_sc & BD_SC_READY) && (xmit->tail != xmit->head)) {
+ while (!(in_be16(&bdp->cbd_sc) & BD_SC_READY) &&
+ xmit->tail != xmit->head) {
count = 0;
- p = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
+ p = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
while (count < pinfo->tx_fifosize) {
*p++ = xmit->buf[xmit->tail];
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
@@ -676,11 +681,10 @@ static int cpm_uart_tx_pump(struct uart_port *port)
if (xmit->head == xmit->tail)
break;
}
- bdp->cbd_datlen = count;
- bdp->cbd_sc |= BD_SC_READY;
- eieio();
+ out_be16(&bdp->cbd_datlen, count);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
/* Get next BD. */
- if (bdp->cbd_sc & BD_SC_WRAP)
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = pinfo->tx_bd_base;
else
bdp++;
@@ -705,7 +709,7 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
{
int i;
u8 *mem_addr;
- volatile cbd_t *bdp;
+ cbd_t __iomem *bdp;
pr_debug("CPM uart[%d]:initbd\n", pinfo->port.line);
@@ -716,13 +720,13 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr;
bdp = pinfo->rx_cur = pinfo->rx_bd_base;
for (i = 0; i < (pinfo->rx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
- bdp->cbd_sc = BD_SC_EMPTY | BD_SC_INTRPT;
+ out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+ out_be16(&bdp->cbd_sc, BD_SC_EMPTY | BD_SC_INTRPT);
mem_addr += pinfo->rx_fifosize;
}
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
- bdp->cbd_sc = BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT;
+ out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+ out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_EMPTY | BD_SC_INTRPT);
/* Set the physical address of the host memory
* buffers in the buffer descriptors, and the
@@ -731,20 +735,19 @@ static void cpm_uart_initbd(struct uart_cpm_port *pinfo)
mem_addr = pinfo->mem_addr + L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize);
bdp = pinfo->tx_cur = pinfo->tx_bd_base;
for (i = 0; i < (pinfo->tx_nrfifos - 1); i++, bdp++) {
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
- bdp->cbd_sc = BD_SC_INTRPT;
+ out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+ out_be16(&bdp->cbd_sc, BD_SC_INTRPT);
mem_addr += pinfo->tx_fifosize;
}
- bdp->cbd_bufaddr = cpu2cpm_addr(mem_addr, pinfo);
- bdp->cbd_sc = BD_SC_WRAP | BD_SC_INTRPT;
+ out_be32(&bdp->cbd_bufaddr, cpu2cpm_addr(mem_addr, pinfo));
+ out_be16(&bdp->cbd_sc, BD_SC_WRAP | BD_SC_INTRPT);
}
static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
{
- int line = pinfo - cpm_uart_ports;
- volatile scc_t *scp;
- volatile scc_uart_t *sup;
+ scc_t __iomem *scp;
+ scc_uart_t __iomem *sup;
pr_debug("CPM uart[%d]:init_scc\n", pinfo->port.line);
@@ -752,8 +755,10 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
sup = pinfo->sccup;
/* Store address */
- pinfo->sccup->scc_genscc.scc_rbase = (unsigned char *)pinfo->rx_bd_base - DPRAM_BASE;
- pinfo->sccup->scc_genscc.scc_tbase = (unsigned char *)pinfo->tx_bd_base - DPRAM_BASE;
+ out_be16(&pinfo->sccup->scc_genscc.scc_rbase,
+ (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+ out_be16(&pinfo->sccup->scc_genscc.scc_tbase,
+ (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
/* Set up the uart parameters in the
* parameter ram.
@@ -761,51 +766,50 @@ static void cpm_uart_init_scc(struct uart_cpm_port *pinfo)
cpm_set_scc_fcr(sup);
- sup->scc_genscc.scc_mrblr = pinfo->rx_fifosize;
- sup->scc_maxidl = pinfo->rx_fifosize;
- sup->scc_brkcr = 1;
- sup->scc_parec = 0;
- sup->scc_frmec = 0;
- sup->scc_nosec = 0;
- sup->scc_brkec = 0;
- sup->scc_uaddr1 = 0;
- sup->scc_uaddr2 = 0;
- sup->scc_toseq = 0;
- sup->scc_char1 = 0x8000;
- sup->scc_char2 = 0x8000;
- sup->scc_char3 = 0x8000;
- sup->scc_char4 = 0x8000;
- sup->scc_char5 = 0x8000;
- sup->scc_char6 = 0x8000;
- sup->scc_char7 = 0x8000;
- sup->scc_char8 = 0x8000;
- sup->scc_rccm = 0xc0ff;
+ out_be16(&sup->scc_genscc.scc_mrblr, pinfo->rx_fifosize);
+ out_be16(&sup->scc_maxidl, pinfo->rx_fifosize);
+ out_be16(&sup->scc_brkcr, 1);
+ out_be16(&sup->scc_parec, 0);
+ out_be16(&sup->scc_frmec, 0);
+ out_be16(&sup->scc_nosec, 0);
+ out_be16(&sup->scc_brkec, 0);
+ out_be16(&sup->scc_uaddr1, 0);
+ out_be16(&sup->scc_uaddr2, 0);
+ out_be16(&sup->scc_toseq, 0);
+ out_be16(&sup->scc_char1, 0x8000);
+ out_be16(&sup->scc_char2, 0x8000);
+ out_be16(&sup->scc_char3, 0x8000);
+ out_be16(&sup->scc_char4, 0x8000);
+ out_be16(&sup->scc_char5, 0x8000);
+ out_be16(&sup->scc_char6, 0x8000);
+ out_be16(&sup->scc_char7, 0x8000);
+ out_be16(&sup->scc_char8, 0x8000);
+ out_be16(&sup->scc_rccm, 0xc0ff);
/* Send the CPM an initialize command.
*/
- cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
- scp->scc_gsmrh = 0;
- scp->scc_gsmrl =
- (SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
+ out_be32(&scp->scc_gsmrh, 0);
+ out_be32(&scp->scc_gsmrl,
+ SCC_GSMRL_MODE_UART | SCC_GSMRL_TDCR_16 | SCC_GSMRL_RDCR_16);
/* Enable rx interrupts and clear all pending events. */
- scp->scc_sccm = 0;
- scp->scc_scce = 0xffff;
- scp->scc_dsr = 0x7e7e;
- scp->scc_psmr = 0x3000;
+ out_be16(&scp->scc_sccm, 0);
+ out_be16(&scp->scc_scce, 0xffff);
+ out_be16(&scp->scc_dsr, 0x7e7e);
+ out_be16(&scp->scc_psmr, 0x3000);
- scp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ setbits32(&scp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
{
- int line = pinfo - cpm_uart_ports;
- volatile smc_t *sp;
- volatile smc_uart_t *up;
+ smc_t __iomem *sp;
+ smc_uart_t __iomem *up;
pr_debug("CPM uart[%d]:init_smc\n", pinfo->port.line);
@@ -813,19 +817,21 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
up = pinfo->smcup;
/* Store address */
- pinfo->smcup->smc_rbase = (u_char *)pinfo->rx_bd_base - DPRAM_BASE;
- pinfo->smcup->smc_tbase = (u_char *)pinfo->tx_bd_base - DPRAM_BASE;
+ out_be16(&pinfo->smcup->smc_rbase,
+ (u8 __iomem *)pinfo->rx_bd_base - DPRAM_BASE);
+ out_be16(&pinfo->smcup->smc_tbase,
+ (u8 __iomem *)pinfo->tx_bd_base - DPRAM_BASE);
/*
* In case SMC1 is being relocated...
*/
#if defined (CONFIG_I2C_SPI_SMC1_UCODE_PATCH)
- up->smc_rbptr = pinfo->smcup->smc_rbase;
- up->smc_tbptr = pinfo->smcup->smc_tbase;
- up->smc_rstate = 0;
- up->smc_tstate = 0;
- up->smc_brkcr = 1; /* number of break chars */
- up->smc_brkec = 0;
+ out_be16(&up->smc_rbptr, in_be16(&pinfo->smcup->smc_rbase));
+ out_be16(&up->smc_tbptr, in_be16(&pinfo->smcup->smc_tbase));
+ out_be32(&up->smc_rstate, 0);
+ out_be32(&up->smc_tstate, 0);
+ out_be16(&up->smc_brkcr, 1); /* number of break chars */
+ out_be16(&up->smc_brkec, 0);
#endif
/* Set up the uart parameters in the
@@ -834,24 +840,24 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
cpm_set_smc_fcr(up);
/* Using idle charater time requires some additional tuning. */
- up->smc_mrblr = pinfo->rx_fifosize;
- up->smc_maxidl = pinfo->rx_fifosize;
- up->smc_brklen = 0;
- up->smc_brkec = 0;
- up->smc_brkcr = 1;
+ out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
+ out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
+ out_be16(&up->smc_brklen, 0);
+ out_be16(&up->smc_brkec, 0);
+ out_be16(&up->smc_brkcr, 1);
- cpm_line_cr_cmd(line, CPM_CR_INIT_TRX);
+ cpm_line_cr_cmd(pinfo, CPM_CR_INIT_TRX);
/* Set UART mode, 8 bit, no parity, one stop.
* Enable receive and transmit.
*/
- sp->smc_smcmr = smcr_mk_clen(9) | SMCMR_SM_UART;
+ out_be16(&sp->smc_smcmr, smcr_mk_clen(9) | SMCMR_SM_UART);
/* Enable only rx interrupts clear all pending events. */
- sp->smc_smcm = 0;
- sp->smc_smce = 0xff;
+ out_8(&sp->smc_smcm, 0);
+ out_8(&sp->smc_smce, 0xff);
- sp->smc_smcmr |= (SMCMR_REN | SMCMR_TEN);
+ setbits16(&sp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
}
/*
@@ -869,11 +875,11 @@ static int cpm_uart_request_port(struct uart_port *port)
return 0;
if (IS_SMC(pinfo)) {
- pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
- pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
+ clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
} else {
- pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
- pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
ret = cpm_uart_allocbuf(pinfo, 0);
@@ -929,6 +935,86 @@ static struct uart_ops cpm_uart_pops = {
.verify_port = cpm_uart_verify_port,
};
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+struct uart_cpm_port cpm_uart_ports[UART_NR];
+
+static int cpm_uart_init_port(struct device_node *np,
+ struct uart_cpm_port *pinfo)
+{
+ const u32 *data;
+ void __iomem *mem, *pram;
+ int len;
+ int ret;
+
+ data = of_get_property(np, "fsl,cpm-brg", &len);
+ if (!data || len != 4) {
+ printk(KERN_ERR "CPM UART %s has no/invalid "
+ "fsl,cpm-brg property.\n", np->name);
+ return -EINVAL;
+ }
+ pinfo->brg = *data;
+
+ data = of_get_property(np, "fsl,cpm-command", &len);
+ if (!data || len != 4) {
+ printk(KERN_ERR "CPM UART %s has no/invalid "
+ "fsl,cpm-command property.\n", np->name);
+ return -EINVAL;
+ }
+ pinfo->command = *data;
+
+ mem = of_iomap(np, 0);
+ if (!mem)
+ return -ENOMEM;
+
+ pram = of_iomap(np, 1);
+ if (!pram) {
+ ret = -ENOMEM;
+ goto out_mem;
+ }
+
+ if (of_device_is_compatible(np, "fsl,cpm1-scc-uart") ||
+ of_device_is_compatible(np, "fsl,cpm2-scc-uart")) {
+ pinfo->sccp = mem;
+ pinfo->sccup = pram;
+ } else if (of_device_is_compatible(np, "fsl,cpm1-smc-uart") ||
+ of_device_is_compatible(np, "fsl,cpm2-smc-uart")) {
+ pinfo->flags |= FLAG_SMC;
+ pinfo->smcp = mem;
+ pinfo->smcup = pram;
+ } else {
+ ret = -ENODEV;
+ goto out_pram;
+ }
+
+ pinfo->tx_nrfifos = TX_NUM_FIFO;
+ pinfo->tx_fifosize = TX_BUF_SIZE;
+ pinfo->rx_nrfifos = RX_NUM_FIFO;
+ pinfo->rx_fifosize = RX_BUF_SIZE;
+
+ pinfo->port.uartclk = ppc_proc_freq;
+ pinfo->port.mapbase = (unsigned long)mem;
+ pinfo->port.type = PORT_CPM;
+ pinfo->port.ops = &cpm_uart_pops,
+ pinfo->port.iotype = UPIO_MEM;
+ spin_lock_init(&pinfo->port.lock);
+
+ pinfo->port.irq = of_irq_to_resource(np, 0, NULL);
+ if (pinfo->port.irq == NO_IRQ) {
+ ret = -EINVAL;
+ goto out_pram;
+ }
+
+ return cpm_uart_request_port(&pinfo->port);
+
+out_pram:
+ iounmap(pram);
+out_mem:
+ iounmap(mem);
+ return ret;
+}
+
+#else
+
struct uart_cpm_port cpm_uart_ports[UART_NR] = {
[UART_SMC1] = {
.port = {
@@ -1072,6 +1158,7 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
return 0;
}
+#endif
#ifdef CONFIG_SERIAL_CPM_CONSOLE
/*
@@ -1083,11 +1170,15 @@ int cpm_uart_drv_get_platform_data(struct platform_device *pdev, int is_con)
static void cpm_uart_console_write(struct console *co, const char *s,
u_int count)
{
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
+#else
struct uart_cpm_port *pinfo =
&cpm_uart_ports[cpm_uart_port_map[co->index]];
+#endif
unsigned int i;
- volatile cbd_t *bdp, *bdbase;
- volatile unsigned char *cp;
+ cbd_t __iomem *bdp, *bdbase;
+ unsigned char *cp;
/* Get the address of the host memory buffer.
*/
@@ -1105,37 +1196,36 @@ static void cpm_uart_console_write(struct console *co, const char *s,
* Ready indicates output is ready, and xmt is doing
* that, not that it is ready for us to send.
*/
- while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
/* Send the character out.
* If the buffer address is in the CPM DPRAM, don't
* convert it.
*/
- cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
-
+ cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
*cp = *s;
- bdp->cbd_datlen = 1;
- bdp->cbd_sc |= BD_SC_READY;
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
- if (bdp->cbd_sc & BD_SC_WRAP)
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
/* if a LF, also do CR... */
if (*s == 10) {
- while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
- cp = cpm2cpu_addr(bdp->cbd_bufaddr, pinfo);
-
+ cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
*cp = 13;
- bdp->cbd_datlen = 1;
- bdp->cbd_sc |= BD_SC_READY;
- if (bdp->cbd_sc & BD_SC_WRAP)
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
bdp = bdbase;
else
bdp++;
@@ -1146,22 +1236,56 @@ static void cpm_uart_console_write(struct console *co, const char *s,
* Finally, Wait for transmitter & holding register to empty
* and restore the IER
*/
- while ((bdp->cbd_sc & BD_SC_READY) != 0)
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
;
- pinfo->tx_cur = (volatile cbd_t *) bdp;
+ pinfo->tx_cur = bdp;
}
static int __init cpm_uart_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
- struct uart_cpm_port *pinfo;
int baud = 38400;
int bits = 8;
int parity = 'n';
int flow = 'n';
int ret;
+ struct uart_cpm_port *pinfo;
+ struct uart_port *port;
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+ struct device_node *np = NULL;
+ int i = 0;
+
+ if (co->index >= UART_NR) {
+ printk(KERN_ERR "cpm_uart: console index %d too high\n",
+ co->index);
+ return -ENODEV;
+ }
+
+ do {
+ np = of_find_node_by_type(np, "serial");
+ if (!np)
+ return -ENODEV;
+
+ if (!of_device_is_compatible(np, "fsl,cpm1-smc-uart") &&
+ !of_device_is_compatible(np, "fsl,cpm1-scc-uart") &&
+ !of_device_is_compatible(np, "fsl,cpm2-smc-uart") &&
+ !of_device_is_compatible(np, "fsl,cpm2-scc-uart"))
+ i--;
+ } while (i++ != co->index);
+
+ pinfo = &cpm_uart_ports[co->index];
+
+ pinfo->flags |= FLAG_CONSOLE;
+ port = &pinfo->port;
+
+ ret = cpm_uart_init_port(np, pinfo);
+ of_node_put(np);
+ if (ret)
+ return ret;
+
+#else
struct fs_uart_platform_info *pdata;
struct platform_device* pdev = early_uart_get_pdev(co->index);
@@ -1188,6 +1312,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
}
pinfo->flags |= FLAG_CONSOLE;
+#endif
if (options) {
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -1196,12 +1321,18 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
baud = 9600;
}
+#ifdef CONFIG_PPC_EARLY_DEBUG_CPM
+ udbg_putc = NULL;
+#endif
+
+ cpm_line_cr_cmd(pinfo, CPM_CR_STOP_TX);
+
if (IS_SMC(pinfo)) {
- pinfo->smcp->smc_smcm &= ~(SMCM_RX | SMCM_TX);
- pinfo->smcp->smc_smcmr &= ~(SMCMR_REN | SMCMR_TEN);
+ clrbits8(&pinfo->smcp->smc_smcm, SMCM_RX | SMCM_TX);
+ clrbits16(&pinfo->smcp->smc_smcmr, SMCMR_REN | SMCMR_TEN);
} else {
- pinfo->sccp->scc_sccm &= ~(UART_SCCM_TX | UART_SCCM_RX);
- pinfo->sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
+ clrbits16(&pinfo->sccp->scc_sccm, UART_SCCM_TX | UART_SCCM_RX);
+ clrbits32(&pinfo->sccp->scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
ret = cpm_uart_allocbuf(pinfo, 1);
@@ -1217,6 +1348,7 @@ static int __init cpm_uart_console_setup(struct console *co, char *options)
cpm_uart_init_scc(pinfo);
uart_set_options(port, co, baud, parity, bits, flow);
+ cpm_line_cr_cmd(pinfo, CPM_CR_RESTART_TX);
return 0;
}
@@ -1232,7 +1364,7 @@ static struct console cpm_scc_uart_console = {
.data = &cpm_reg,
};
-int __init cpm_uart_console_init(void)
+static int __init cpm_uart_console_init(void)
{
register_console(&cpm_scc_uart_console);
return 0;
@@ -1252,7 +1384,81 @@ static struct uart_driver cpm_reg = {
.major = SERIAL_CPM_MAJOR,
.minor = SERIAL_CPM_MINOR,
.cons = CPM_UART_CONSOLE,
+ .nr = UART_NR,
};
+
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+static int probe_index;
+
+static int __devinit cpm_uart_probe(struct of_device *ofdev,
+ const struct of_device_id *match)
+{
+ int index = probe_index++;
+ struct uart_cpm_port *pinfo = &cpm_uart_ports[index];
+ int ret;
+
+ pinfo->port.line = index;
+
+ if (index >= UART_NR)
+ return -ENODEV;
+
+ dev_set_drvdata(&ofdev->dev, pinfo);
+
+ ret = cpm_uart_init_port(ofdev->node, pinfo);
+ if (ret)
+ return ret;
+
+ return uart_add_one_port(&cpm_reg, &pinfo->port);
+}
+
+static int __devexit cpm_uart_remove(struct of_device *ofdev)
+{
+ struct uart_cpm_port *pinfo = dev_get_drvdata(&ofdev->dev);
+ return uart_remove_one_port(&cpm_reg, &pinfo->port);
+}
+
+static struct of_device_id cpm_uart_match[] = {
+ {
+ .compatible = "fsl,cpm1-smc-uart",
+ },
+ {
+ .compatible = "fsl,cpm1-scc-uart",
+ },
+ {
+ .compatible = "fsl,cpm2-smc-uart",
+ },
+ {
+ .compatible = "fsl,cpm2-scc-uart",
+ },
+ {}
+};
+
+static struct of_platform_driver cpm_uart_driver = {
+ .name = "cpm_uart",
+ .match_table = cpm_uart_match,
+ .probe = cpm_uart_probe,
+ .remove = cpm_uart_remove,
+ };
+
+static int __init cpm_uart_init(void)
+{
+ int ret = uart_register_driver(&cpm_reg);
+ if (ret)
+ return ret;
+
+ ret = of_register_platform_driver(&cpm_uart_driver);
+ if (ret)
+ uart_unregister_driver(&cpm_reg);
+
+ return ret;
+}
+
+static void __exit cpm_uart_exit(void)
+{
+ of_unregister_platform_driver(&cpm_uart_driver);
+ uart_unregister_driver(&cpm_reg);
+}
+#else
static int cpm_uart_drv_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -1380,6 +1586,7 @@ static void __exit cpm_uart_exit(void)
driver_unregister(&cpm_smc_uart_driver);
uart_unregister_driver(&cpm_reg);
}
+#endif
module_init(cpm_uart_init);
module_exit(cpm_uart_exit);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.c b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
index 8c6324ed0202..52fb044bb79a 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.c
@@ -49,9 +49,20 @@
/**************************************************************/
-void cpm_line_cr_cmd(int line, int cmd)
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+{
+ u16 __iomem *cpcr = &cpmp->cp_cpcr;
+
+ out_be16(cpcr, port->command | (cmd << 8) | CPM_CR_FLG);
+ while (in_be16(cpcr) & CPM_CR_FLG)
+ ;
+}
+#else
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
ushort val;
+ int line = port - cpm_uart_ports;
volatile cpm8xx_t *cp = cpmp;
switch (line) {
@@ -114,6 +125,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
/* XXX SCC4: insert port configuration here */
pinfo->brg = 4;
}
+#endif
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
@@ -167,7 +179,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
- pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->rx_bd_base = (cbd_t __iomem __force *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
@@ -184,6 +196,7 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
cpm_dpfree(pinfo->dp_addr);
}
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* Setup any dynamic params in the uart desc */
int cpm_uart_init_portdesc(void)
{
@@ -279,3 +292,4 @@ int cpm_uart_init_portdesc(void)
#endif
return 0;
}
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm1.h b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
index 2a6477834c3e..9b5465fb0bbb 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm1.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm1.h
@@ -13,30 +13,32 @@
#include <asm/commproc.h>
/* defines for IRQs */
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
#define SMC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC1)
#define SMC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SMC2)
#define SCC1_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC1)
#define SCC2_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC2)
#define SCC3_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC3)
#define SCC4_IRQ (CPM_IRQ_OFFSET + CPMVEC_SCC4)
+#endif
static inline void cpm_set_brg(int brg, int baud)
{
cpm_setbrg(brg, baud);
}
-static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+static inline void cpm_set_scc_fcr(scc_uart_t __iomem * sup)
{
- sup->scc_genscc.scc_rfcr = SMC_EB;
- sup->scc_genscc.scc_tfcr = SMC_EB;
+ out_8(&sup->scc_genscc.scc_rfcr, SMC_EB);
+ out_8(&sup->scc_genscc.scc_tfcr, SMC_EB);
}
-static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+static inline void cpm_set_smc_fcr(smc_uart_t __iomem * up)
{
- up->smc_rfcr = SMC_EB;
- up->smc_tfcr = SMC_EB;
+ out_8(&up->smc_rfcr, SMC_EB);
+ out_8(&up->smc_tfcr, SMC_EB);
}
-#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0))
+#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0))
#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 7b61d805ebe9..882dbc17d590 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -49,9 +49,22 @@
/**************************************************************/
-void cpm_line_cr_cmd(int line, int cmd)
+#ifdef CONFIG_PPC_CPM_NEW_BINDING
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
+{
+ cpm_cpm2_t __iomem *cp = cpm2_map(im_cpm);
+
+ out_be32(&cp->cp_cpcr, port->command | cmd | CPM_CR_FLG);
+ while (in_be32(&cp->cp_cpcr) & CPM_CR_FLG)
+ ;
+
+ cpm2_unmap(cp);
+}
+#else
+void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd)
{
ulong val;
+ int line = port - cpm_uart_ports;
volatile cpm_cpm2_t *cp = cpm2_map(im_cpm);
@@ -211,6 +224,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
cpm2_unmap(cpmux);
cpm2_unmap(io);
}
+#endif
/*
* Allocate DP-Ram and memory buffers. We need to allocate a transmit and
@@ -221,7 +235,7 @@ void scc4_lineif(struct uart_cpm_port *pinfo)
int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
{
int dpmemsz, memsz;
- u8 *dp_mem;
+ u8 __iomem *dp_mem;
unsigned long dp_offset;
u8 *mem_addr;
dma_addr_t dma_addr = 0;
@@ -264,7 +278,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
pinfo->tx_buf = pinfo->rx_buf + L1_CACHE_ALIGN(pinfo->rx_nrfifos
* pinfo->rx_fifosize);
- pinfo->rx_bd_base = (volatile cbd_t *)dp_mem;
+ pinfo->rx_bd_base = (cbd_t __iomem *)dp_mem;
pinfo->tx_bd_base = pinfo->rx_bd_base + pinfo->rx_nrfifos;
return 0;
@@ -275,12 +289,13 @@ void cpm_uart_freebuf(struct uart_cpm_port *pinfo)
dma_free_coherent(NULL, L1_CACHE_ALIGN(pinfo->rx_nrfifos *
pinfo->rx_fifosize) +
L1_CACHE_ALIGN(pinfo->tx_nrfifos *
- pinfo->tx_fifosize), pinfo->mem_addr,
+ pinfo->tx_fifosize), (void __force *)pinfo->mem_addr,
pinfo->dma_addr);
cpm_dpfree(pinfo->dp_addr);
}
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
/* Setup any dynamic params in the uart desc */
int cpm_uart_init_portdesc(void)
{
@@ -386,3 +401,4 @@ int cpm_uart_init_portdesc(void)
return 0;
}
+#endif
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.h b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
index 1b3219f56c81..40006a7dce46 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.h
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.h
@@ -13,30 +13,32 @@
#include <asm/cpm2.h>
/* defines for IRQs */
+#ifndef CONFIG_PPC_CPM_NEW_BINDING
#define SMC1_IRQ SIU_INT_SMC1
#define SMC2_IRQ SIU_INT_SMC2
#define SCC1_IRQ SIU_INT_SCC1
#define SCC2_IRQ SIU_INT_SCC2
#define SCC3_IRQ SIU_INT_SCC3
#define SCC4_IRQ SIU_INT_SCC4
+#endif
static inline void cpm_set_brg(int brg, int baud)
{
cpm_setbrg(brg, baud);
}
-static inline void cpm_set_scc_fcr(volatile scc_uart_t * sup)
+static inline void cpm_set_scc_fcr(scc_uart_t __iomem *sup)
{
- sup->scc_genscc.scc_rfcr = CPMFCR_GBL | CPMFCR_EB;
- sup->scc_genscc.scc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+ out_8(&sup->scc_genscc.scc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+ out_8(&sup->scc_genscc.scc_tfcr, CPMFCR_GBL | CPMFCR_EB);
}
-static inline void cpm_set_smc_fcr(volatile smc_uart_t * up)
+static inline void cpm_set_smc_fcr(smc_uart_t __iomem *up)
{
- up->smc_rfcr = CPMFCR_GBL | CPMFCR_EB;
- up->smc_tfcr = CPMFCR_GBL | CPMFCR_EB;
+ out_8(&up->smc_rfcr, CPMFCR_GBL | CPMFCR_EB);
+ out_8(&up->smc_tfcr, CPMFCR_GBL | CPMFCR_EB);
}
-#define DPRAM_BASE ((unsigned char *)cpm_dpram_addr(0))
+#define DPRAM_BASE ((u8 __iomem __force *)cpm_dpram_addr(0))
#endif
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 35f8b86cc78f..035cca028199 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -1051,7 +1051,7 @@ mpc52xx_uart_of_assign(struct device_node *np, int idx)
/* If the slot is already occupied, then swap slots */
if (mpc52xx_uart_nodes[idx] && (free_idx != -1))
mpc52xx_uart_nodes[free_idx] = mpc52xx_uart_nodes[idx];
- mpc52xx_uart_nodes[i] = np;
+ mpc52xx_uart_nodes[idx] = np;
}
static void
diff --git a/drivers/serial/pmac_zilog.c b/drivers/serial/pmac_zilog.c
index 0fa9f6761763..794bd0f50d73 100644
--- a/drivers/serial/pmac_zilog.c
+++ b/drivers/serial/pmac_zilog.c
@@ -88,6 +88,16 @@ MODULE_LICENSE("GPL");
#define PWRDBG(fmt, arg...) printk(KERN_DEBUG fmt , ## arg)
+#ifdef CONFIG_SERIAL_PMACZILOG_TTYS
+#define PMACZILOG_MAJOR TTY_MAJOR
+#define PMACZILOG_MINOR 64
+#define PMACZILOG_NAME "ttyS"
+#else
+#define PMACZILOG_MAJOR 204
+#define PMACZILOG_MINOR 192
+#define PMACZILOG_NAME "ttyPZ"
+#endif
+
/*
* For the sake of early serial console, we can do a pre-probe
@@ -99,9 +109,10 @@ static DEFINE_MUTEX(pmz_irq_mutex);
static struct uart_driver pmz_uart_reg = {
.owner = THIS_MODULE,
- .driver_name = "ttyS",
- .dev_name = "ttyS",
- .major = TTY_MAJOR,
+ .driver_name = PMACZILOG_NAME,
+ .dev_name = PMACZILOG_NAME,
+ .major = PMACZILOG_MAJOR,
+ .minor = PMACZILOG_MINOR,
};
@@ -1587,7 +1598,7 @@ static int pmz_suspend(struct macio_dev *mdev, pm_message_t pm_state)
if (pm_state.event == mdev->ofdev.dev.power.power_state.event)
return 0;
- pmz_debug("suspend, switching to state %d\n", pm_state);
+ pmz_debug("suspend, switching to state %d\n", pm_state.event);
state = pmz_uart_reg.state + uap->port.line;
@@ -1778,7 +1789,7 @@ static void pmz_console_write(struct console *con, const char *s, unsigned int c
static int __init pmz_console_setup(struct console *co, char *options);
static struct console pmz_console = {
- .name = "ttyS",
+ .name = PMACZILOG_NAME,
.write = pmz_console_write,
.device = uart_console_device,
.setup = pmz_console_setup,
@@ -1802,7 +1813,6 @@ static int __init pmz_register(void)
pmz_uart_reg.nr = pmz_ports_count;
pmz_uart_reg.cons = PMACZILOG_CONSOLE;
- pmz_uart_reg.minor = 64;
/*
* Register this driver with the serial core
diff --git a/drivers/serial/uartlite.c b/drivers/serial/uartlite.c
index f5051cf1a0c8..dfef83f14960 100644
--- a/drivers/serial/uartlite.c
+++ b/drivers/serial/uartlite.c
@@ -1,7 +1,8 @@
/*
* uartlite.c: Serial driver for Xilinx uartlite serial controller
*
- * Peter Korsgaard <jacmet@sunsite.dk>
+ * Copyright (C) 2006 Peter Korsgaard <jacmet@sunsite.dk>
+ * Copyright (C) 2007 Secret Lab Technologies Ltd.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@@ -17,14 +18,23 @@
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <asm/io.h>
+#if defined(CONFIG_OF)
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#endif
+#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
#define ULITE_MINOR 187
#define ULITE_NR_UARTS 4
-/* For register details see datasheet:
- http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
-*/
+/* ---------------------------------------------------------------------
+ * Register definitions
+ *
+ * For register details see datasheet:
+ * http://www.xilinx.com/bvdocs/ipcenter/data_sheet/opb_uartlite.pdf
+ */
+
#define ULITE_RX 0x00
#define ULITE_TX 0x04
#define ULITE_STATUS 0x08
@@ -46,7 +56,11 @@
#define ULITE_CONTROL_IE 0x10
-static struct uart_port ports[ULITE_NR_UARTS];
+static struct uart_port ulite_ports[ULITE_NR_UARTS];
+
+/* ---------------------------------------------------------------------
+ * Core UART driver operations
+ */
static int ulite_receive(struct uart_port *port, int stat)
{
@@ -307,6 +321,10 @@ static struct uart_ops ulite_ops = {
.verify_port = ulite_verify_port
};
+/* ---------------------------------------------------------------------
+ * Console driver operations
+ */
+
#ifdef CONFIG_SERIAL_UARTLITE_CONSOLE
static void ulite_console_wait_tx(struct uart_port *port)
{
@@ -329,7 +347,7 @@ static void ulite_console_putchar(struct uart_port *port, int ch)
static void ulite_console_write(struct console *co, const char *s,
unsigned int count)
{
- struct uart_port *port = &ports[co->index];
+ struct uart_port *port = &ulite_ports[co->index];
unsigned long flags;
unsigned int ier;
int locked = 1;
@@ -355,6 +373,31 @@ static void ulite_console_write(struct console *co, const char *s,
spin_unlock_irqrestore(&port->lock, flags);
}
+#if defined(CONFIG_OF)
+static inline void __init ulite_console_of_find_device(int id)
+{
+ struct device_node *np;
+ struct resource res;
+ const unsigned int *of_id;
+ int rc;
+
+ for_each_compatible_node(np, NULL, "xilinx,uartlite") {
+ of_id = of_get_property(np, "port-number", NULL);
+ if ((!of_id) || (*of_id != id))
+ continue;
+
+ rc = of_address_to_resource(np, 0, &res);
+ if (rc)
+ continue;
+
+ ulite_ports[id].mapbase = res.start;
+ return;
+ }
+}
+#else /* CONFIG_OF */
+static inline void __init ulite_console_of_find_device(int id) { /* do nothing */ }
+#endif /* CONFIG_OF */
+
static int __init ulite_console_setup(struct console *co, char *options)
{
struct uart_port *port;
@@ -366,11 +409,23 @@ static int __init ulite_console_setup(struct console *co, char *options)
if (co->index < 0 || co->index >= ULITE_NR_UARTS)
return -EINVAL;
- port = &ports[co->index];
+ port = &ulite_ports[co->index];
- /* not initialized yet? */
- if (!port->membase)
+ /* Check if it is an OF device */
+ if (!port->mapbase)
+ ulite_console_of_find_device(co->index);
+
+ /* Do we have a device now? */
+ if (!port->mapbase) {
+ pr_debug("console on ttyUL%i not present\n", co->index);
return -ENODEV;
+ }
+
+ /* not initialized yet? */
+ if (!port->membase) {
+ if (ulite_request_port(port))
+ return -ENODEV;
+ }
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
@@ -381,7 +436,7 @@ static int __init ulite_console_setup(struct console *co, char *options)
static struct uart_driver ulite_uart_driver;
static struct console ulite_console = {
- .name = "ttyUL",
+ .name = ULITE_NAME,
.write = ulite_console_write,
.device = uart_console_device,
.setup = ulite_console_setup,
@@ -403,7 +458,7 @@ console_initcall(ulite_console_init);
static struct uart_driver ulite_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "uartlite",
- .dev_name = "ttyUL",
+ .dev_name = ULITE_NAME,
.major = ULITE_MAJOR,
.minor = ULITE_MINOR,
.nr = ULITE_NR_UARTS,
@@ -412,59 +467,111 @@ static struct uart_driver ulite_uart_driver = {
#endif
};
-static int __devinit ulite_probe(struct platform_device *pdev)
+/* ---------------------------------------------------------------------
+ * Port assignment functions (mapping devices to uart_port structures)
+ */
+
+/** ulite_assign: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ * @id: requested id number. Pass -1 for automatic port assignment
+ * @base: base address of uartlite registers
+ * @irq: irq number for uartlite
+ *
+ * Returns: 0 on success, <0 otherwise
+ */
+static int __devinit ulite_assign(struct device *dev, int id, u32 base, int irq)
{
- struct resource *res, *res2;
struct uart_port *port;
+ int rc;
- if (pdev->id < 0 || pdev->id >= ULITE_NR_UARTS)
+ /* if id = -1; then scan for a free id and use that */
+ if (id < 0) {
+ for (id = 0; id < ULITE_NR_UARTS; id++)
+ if (ulite_ports[id].mapbase == 0)
+ break;
+ }
+ if (id < 0 || id >= ULITE_NR_UARTS) {
+ dev_err(dev, "%s%i too large\n", ULITE_NAME, id);
return -EINVAL;
+ }
- if (ports[pdev->id].membase)
+ if ((ulite_ports[id].mapbase) && (ulite_ports[id].mapbase != base)) {
+ dev_err(dev, "cannot assign to %s%i; it is already in use\n",
+ ULITE_NAME, id);
return -EBUSY;
+ }
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
+ port = &ulite_ports[id];
- res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!res2)
- return -ENODEV;
+ spin_lock_init(&port->lock);
+ port->fifosize = 16;
+ port->regshift = 2;
+ port->iotype = UPIO_MEM;
+ port->iobase = 1; /* mark port in use */
+ port->mapbase = base;
+ port->membase = NULL;
+ port->ops = &ulite_ops;
+ port->irq = irq;
+ port->flags = UPF_BOOT_AUTOCONF;
+ port->dev = dev;
+ port->type = PORT_UNKNOWN;
+ port->line = id;
+
+ dev_set_drvdata(dev, port);
+
+ /* Register the port */
+ rc = uart_add_one_port(&ulite_uart_driver, port);
+ if (rc) {
+ dev_err(dev, "uart_add_one_port() failed; err=%i\n", rc);
+ port->mapbase = 0;
+ dev_set_drvdata(dev, NULL);
+ return rc;
+ }
- port = &ports[pdev->id];
+ return 0;
+}
- port->fifosize = 16;
- port->regshift = 2;
- port->iotype = UPIO_MEM;
- port->iobase = 1; /* mark port in use */
- port->mapbase = res->start;
- port->membase = NULL;
- port->ops = &ulite_ops;
- port->irq = res2->start;
- port->flags = UPF_BOOT_AUTOCONF;
- port->dev = &pdev->dev;
- port->type = PORT_UNKNOWN;
- port->line = pdev->id;
+/** ulite_release: register a uartlite device with the driver
+ *
+ * @dev: pointer to device structure
+ */
+static int __devinit ulite_release(struct device *dev)
+{
+ struct uart_port *port = dev_get_drvdata(dev);
+ int rc = 0;
- uart_add_one_port(&ulite_uart_driver, port);
- platform_set_drvdata(pdev, port);
+ if (port) {
+ rc = uart_remove_one_port(&ulite_uart_driver, port);
+ dev_set_drvdata(dev, NULL);
+ port->mapbase = 0;
+ }
- return 0;
+ return rc;
}
-static int ulite_remove(struct platform_device *pdev)
+/* ---------------------------------------------------------------------
+ * Platform bus binding
+ */
+
+static int __devinit ulite_probe(struct platform_device *pdev)
{
- struct uart_port *port = platform_get_drvdata(pdev);
+ struct resource *res, *res2;
- platform_set_drvdata(pdev, NULL);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENODEV;
- if (port)
- uart_remove_one_port(&ulite_uart_driver, port);
+ res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res2)
+ return -ENODEV;
- /* mark port as free */
- port->membase = NULL;
+ return ulite_assign(&pdev->dev, pdev->id, res->start, res2->start);
+}
- return 0;
+static int ulite_remove(struct platform_device *pdev)
+{
+ return ulite_release(&pdev->dev);
}
static struct platform_driver ulite_platform_driver = {
@@ -476,24 +583,109 @@ static struct platform_driver ulite_platform_driver = {
},
};
+/* ---------------------------------------------------------------------
+ * OF bus bindings
+ */
+#if defined(CONFIG_OF)
+static int __devinit
+ulite_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct resource res;
+ const unsigned int *id;
+ int irq, rc;
+
+ dev_dbg(&op->dev, "%s(%p, %p)\n", __FUNCTION__, op, match);
+
+ rc = of_address_to_resource(op->node, 0, &res);
+ if (rc) {
+ dev_err(&op->dev, "invalid address\n");
+ return rc;
+ }
+
+ irq = irq_of_parse_and_map(op->node, 0);
+
+ id = of_get_property(op->node, "port-number", NULL);
+
+ return ulite_assign(&op->dev, id ? *id : -1, res.start+3, irq);
+}
+
+static int __devexit ulite_of_remove(struct of_device *op)
+{
+ return ulite_release(&op->dev);
+}
+
+/* Match table for of_platform binding */
+static struct of_device_id __devinit ulite_of_match[] = {
+ { .type = "serial", .compatible = "xilinx,uartlite", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, ulite_of_match);
+
+static struct of_platform_driver ulite_of_driver = {
+ .owner = THIS_MODULE,
+ .name = "uartlite",
+ .match_table = ulite_of_match,
+ .probe = ulite_of_probe,
+ .remove = __devexit_p(ulite_of_remove),
+ .driver = {
+ .name = "uartlite",
+ },
+};
+
+/* Registration helpers to keep the number of #ifdefs to a minimum */
+static inline int __init ulite_of_register(void)
+{
+ pr_debug("uartlite: calling of_register_platform_driver()\n");
+ return of_register_platform_driver(&ulite_of_driver);
+}
+
+static inline void __exit ulite_of_unregister(void)
+{
+ of_unregister_platform_driver(&ulite_of_driver);
+}
+#else /* CONFIG_OF */
+/* CONFIG_OF not enabled; do nothing helpers */
+static inline int __init ulite_of_register(void) { return 0; }
+static inline void __exit ulite_of_unregister(void) { }
+#endif /* CONFIG_OF */
+
+/* ---------------------------------------------------------------------
+ * Module setup/teardown
+ */
+
int __init ulite_init(void)
{
int ret;
+ pr_debug("uartlite: calling uart_register_driver()\n");
ret = uart_register_driver(&ulite_uart_driver);
if (ret)
- return ret;
+ goto err_uart;
+ ret = ulite_of_register();
+ if (ret)
+ goto err_of;
+
+ pr_debug("uartlite: calling platform_driver_register()\n");
ret = platform_driver_register(&ulite_platform_driver);
if (ret)
- uart_unregister_driver(&ulite_uart_driver);
+ goto err_plat;
+ return 0;
+
+err_plat:
+ ulite_of_unregister();
+err_of:
+ uart_unregister_driver(&ulite_uart_driver);
+err_uart:
+ printk(KERN_ERR "registering uartlite driver failed: err=%i", ret);
return ret;
}
void __exit ulite_exit(void)
{
platform_driver_unregister(&ulite_platform_driver);
+ ulite_of_unregister();
uart_unregister_driver(&ulite_uart_driver);
}