summaryrefslogtreecommitdiff
path: root/drivers/soc
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-05-17 16:26:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2016-05-17 16:26:30 -0700
commita7fd20d1c476af4563e66865213474a2f9f473a4 (patch)
treefb1399e2f82842450245fb058a8fb23c52865f43 /drivers/soc
parentb80fed9595513384424cd141923c9161c4b5021b (diff)
parent917fa5353da05e8a0045b8acacba8d50400d5b12 (diff)
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller: "Highlights: 1) Support SPI based w5100 devices, from Akinobu Mita. 2) Partial Segmentation Offload, from Alexander Duyck. 3) Add GMAC4 support to stmmac driver, from Alexandre TORGUE. 4) Allow cls_flower stats offload, from Amir Vadai. 5) Implement bpf blinding, from Daniel Borkmann. 6) Optimize _ASYNC_ bit twiddling on sockets, unless the socket is actually using FASYNC these atomics are superfluous. From Eric Dumazet. 7) Run TCP more preemptibly, also from Eric Dumazet. 8) Support LED blinking, EEPROM dumps, and rxvlan offloading in mlx5e driver, from Gal Pressman. 9) Allow creating ppp devices via rtnetlink, from Guillaume Nault. 10) Improve BPF usage documentation, from Jesper Dangaard Brouer. 11) Support tunneling offloads in qed, from Manish Chopra. 12) aRFS offloading in mlx5e, from Maor Gottlieb. 13) Add RFS and RPS support to SCTP protocol, from Marcelo Ricardo Leitner. 14) Add MSG_EOR support to TCP, this allows controlling packet coalescing on application record boundaries for more accurate socket timestamp sampling. From Martin KaFai Lau. 15) Fix alignment of 64-bit netlink attributes across the board, from Nicolas Dichtel. 16) Per-vlan stats in bridging, from Nikolay Aleksandrov. 17) Several conversions of drivers to ethtool ksettings, from Philippe Reynes. 18) Checksum neutral ILA in ipv6, from Tom Herbert. 19) Factorize all of the various marvell dsa drivers into one, from Vivien Didelot 20) Add VF support to qed driver, from Yuval Mintz" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1649 commits) Revert "phy dp83867: Fix compilation with CONFIG_OF_MDIO=m" Revert "phy dp83867: Make rgmii parameters optional" r8169: default to 64-bit DMA on recent PCIe chips phy dp83867: Make rgmii parameters optional phy dp83867: Fix compilation with CONFIG_OF_MDIO=m bpf: arm64: remove callee-save registers use for tmp registers asix: Fix offset calculation in asix_rx_fixup() causing slow transmissions switchdev: pass pointer to fib_info instead of copy net_sched: close another race condition in tcf_mirred_release() tipc: fix nametable publication field in nl compat drivers: net: Don't print unpopulated net_device name qed: add support for dcbx. ravb: Add missing free_irq() calls to ravb_close() qed: Remove a stray tab net: ethernet: fec-mpc52xx: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fec-mpc52xx: use phydev from struct net_device bpf, doc: fix typo on bpf_asm descriptions stmmac: hardware TX COE doesn't work when force_thresh_dma_mode is set net: ethernet: fs-enet: use phy_ethtool_{get|set}_link_ksettings net: ethernet: fs-enet: use phydev from struct net_device ...
Diffstat (limited to 'drivers/soc')
-rw-r--r--drivers/soc/qcom/smd-rpm.c9
-rw-r--r--drivers/soc/qcom/smd.c247
-rw-r--r--drivers/soc/qcom/smem.c3
-rw-r--r--drivers/soc/qcom/spm.c8
-rw-r--r--drivers/soc/qcom/wcnss_ctrl.c8
5 files changed, 202 insertions, 73 deletions
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index 731fa066f712..6609d7e0edb0 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -33,6 +33,7 @@
*/
struct qcom_smd_rpm {
struct qcom_smd_channel *rpm_channel;
+ struct device *dev;
struct completion ack;
struct mutex lock;
@@ -149,14 +150,14 @@ out:
}
EXPORT_SYMBOL(qcom_rpm_smd_write);
-static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev,
+static int qcom_smd_rpm_callback(struct qcom_smd_channel *channel,
const void *data,
size_t count)
{
const struct qcom_rpm_header *hdr = data;
size_t hdr_length = le32_to_cpu(hdr->length);
const struct qcom_rpm_message *msg;
- struct qcom_smd_rpm *rpm = dev_get_drvdata(&qsdev->dev);
+ struct qcom_smd_rpm *rpm = qcom_smd_get_drvdata(channel);
const u8 *buf = data + sizeof(struct qcom_rpm_header);
const u8 *end = buf + hdr_length;
char msgbuf[32];
@@ -165,7 +166,7 @@ static int qcom_smd_rpm_callback(struct qcom_smd_device *qsdev,
if (le32_to_cpu(hdr->service_type) != RPM_SERVICE_TYPE_REQUEST ||
hdr_length < sizeof(struct qcom_rpm_message)) {
- dev_err(&qsdev->dev, "invalid request\n");
+ dev_err(rpm->dev, "invalid request\n");
return 0;
}
@@ -206,7 +207,9 @@ static int qcom_smd_rpm_probe(struct qcom_smd_device *sdev)
mutex_init(&rpm->lock);
init_completion(&rpm->ack);
+ rpm->dev = &sdev->dev;
rpm->rpm_channel = sdev->channel;
+ qcom_smd_set_drvdata(sdev->channel, rpm);
dev_set_drvdata(&sdev->dev, rpm);
diff --git a/drivers/soc/qcom/smd.c b/drivers/soc/qcom/smd.c
index 498fd0581a45..ac1957dfdf24 100644
--- a/drivers/soc/qcom/smd.c
+++ b/drivers/soc/qcom/smd.c
@@ -106,9 +106,9 @@ static const struct {
* @channels: list of all channels detected on this edge
* @channels_lock: guard for modifications of @channels
* @allocated: array of bitmaps representing already allocated channels
- * @need_rescan: flag that the @work needs to scan smem for new channels
* @smem_available: last available amount of smem triggering a channel scan
- * @work: work item for edge house keeping
+ * @scan_work: work item for discovering new channels
+ * @state_work: work item for edge state changes
*/
struct qcom_smd_edge {
struct qcom_smd *smd;
@@ -127,10 +127,12 @@ struct qcom_smd_edge {
DECLARE_BITMAP(allocated[SMD_ALLOC_TBL_COUNT], SMD_ALLOC_TBL_SIZE);
- bool need_rescan;
unsigned smem_available;
- struct work_struct work;
+ wait_queue_head_t new_channel_event;
+
+ struct work_struct scan_work;
+ struct work_struct state_work;
};
/*
@@ -186,13 +188,16 @@ struct qcom_smd_channel {
int fifo_size;
void *bounce_buffer;
- int (*cb)(struct qcom_smd_device *, const void *, size_t);
+ qcom_smd_cb_t cb;
spinlock_t recv_lock;
int pkt_size;
+ void *drvdata;
+
struct list_head list;
+ struct list_head dev_list;
};
/**
@@ -378,6 +383,19 @@ static void qcom_smd_channel_reset(struct qcom_smd_channel *channel)
}
/*
+ * Set the callback for a channel, with appropriate locking
+ */
+static void qcom_smd_channel_set_callback(struct qcom_smd_channel *channel,
+ qcom_smd_cb_t cb)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&channel->recv_lock, flags);
+ channel->cb = cb;
+ spin_unlock_irqrestore(&channel->recv_lock, flags);
+};
+
+/*
* Calculate the amount of data available in the rx fifo
*/
static size_t qcom_smd_channel_get_rx_avail(struct qcom_smd_channel *channel)
@@ -497,7 +515,6 @@ static void qcom_smd_channel_advance(struct qcom_smd_channel *channel,
*/
static int qcom_smd_channel_recv_single(struct qcom_smd_channel *channel)
{
- struct qcom_smd_device *qsdev = channel->qsdev;
unsigned tail;
size_t len;
void *ptr;
@@ -517,7 +534,7 @@ static int qcom_smd_channel_recv_single(struct qcom_smd_channel *channel)
len = channel->pkt_size;
}
- ret = channel->cb(qsdev, ptr, len);
+ ret = channel->cb(channel, ptr, len);
if (ret < 0)
return ret;
@@ -601,7 +618,8 @@ static irqreturn_t qcom_smd_edge_intr(int irq, void *data)
struct qcom_smd_edge *edge = data;
struct qcom_smd_channel *channel;
unsigned available;
- bool kick_worker = false;
+ bool kick_scanner = false;
+ bool kick_state = false;
/*
* Handle state changes or data on each of the channels on this edge
@@ -609,7 +627,7 @@ static irqreturn_t qcom_smd_edge_intr(int irq, void *data)
spin_lock(&edge->channels_lock);
list_for_each_entry(channel, &edge->channels, list) {
spin_lock(&channel->recv_lock);
- kick_worker |= qcom_smd_channel_intr(channel);
+ kick_state |= qcom_smd_channel_intr(channel);
spin_unlock(&channel->recv_lock);
}
spin_unlock(&edge->channels_lock);
@@ -622,12 +640,13 @@ static irqreturn_t qcom_smd_edge_intr(int irq, void *data)
available = qcom_smem_get_free_space(edge->remote_pid);
if (available != edge->smem_available) {
edge->smem_available = available;
- edge->need_rescan = true;
- kick_worker = true;
+ kick_scanner = true;
}
- if (kick_worker)
- schedule_work(&edge->work);
+ if (kick_scanner)
+ schedule_work(&edge->scan_work);
+ if (kick_state)
+ schedule_work(&edge->state_work);
return IRQ_HANDLED;
}
@@ -793,18 +812,12 @@ static int qcom_smd_dev_match(struct device *dev, struct device_driver *drv)
}
/*
- * Probe the smd client.
- *
- * The remote side have indicated that it want the channel to be opened, so
- * complete the state handshake and probe our client driver.
+ * Helper for opening a channel
*/
-static int qcom_smd_dev_probe(struct device *dev)
+static int qcom_smd_channel_open(struct qcom_smd_channel *channel,
+ qcom_smd_cb_t cb)
{
- struct qcom_smd_device *qsdev = to_smd_device(dev);
- struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
- struct qcom_smd_channel *channel = qsdev->channel;
size_t bb_size;
- int ret;
/*
* Packets are maximum 4k, but reduce if the fifo is smaller
@@ -814,12 +827,44 @@ static int qcom_smd_dev_probe(struct device *dev)
if (!channel->bounce_buffer)
return -ENOMEM;
- channel->cb = qsdrv->callback;
-
+ qcom_smd_channel_set_callback(channel, cb);
qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENING);
-
qcom_smd_channel_set_state(channel, SMD_CHANNEL_OPENED);
+ return 0;
+}
+
+/*
+ * Helper for closing and resetting a channel
+ */
+static void qcom_smd_channel_close(struct qcom_smd_channel *channel)
+{
+ qcom_smd_channel_set_callback(channel, NULL);
+
+ kfree(channel->bounce_buffer);
+ channel->bounce_buffer = NULL;
+
+ qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);
+ qcom_smd_channel_reset(channel);
+}
+
+/*
+ * Probe the smd client.
+ *
+ * The remote side have indicated that it want the channel to be opened, so
+ * complete the state handshake and probe our client driver.
+ */
+static int qcom_smd_dev_probe(struct device *dev)
+{
+ struct qcom_smd_device *qsdev = to_smd_device(dev);
+ struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
+ struct qcom_smd_channel *channel = qsdev->channel;
+ int ret;
+
+ ret = qcom_smd_channel_open(channel, qsdrv->callback);
+ if (ret)
+ return ret;
+
ret = qsdrv->probe(qsdev);
if (ret)
goto err;
@@ -831,11 +876,7 @@ static int qcom_smd_dev_probe(struct device *dev)
err:
dev_err(&qsdev->dev, "probe failed\n");
- channel->cb = NULL;
- kfree(channel->bounce_buffer);
- channel->bounce_buffer = NULL;
-
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);
+ qcom_smd_channel_close(channel);
return ret;
}
@@ -850,16 +891,15 @@ static int qcom_smd_dev_remove(struct device *dev)
struct qcom_smd_device *qsdev = to_smd_device(dev);
struct qcom_smd_driver *qsdrv = to_smd_driver(dev);
struct qcom_smd_channel *channel = qsdev->channel;
- unsigned long flags;
+ struct qcom_smd_channel *tmp;
+ struct qcom_smd_channel *ch;
qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSING);
/*
* Make sure we don't race with the code receiving data.
*/
- spin_lock_irqsave(&channel->recv_lock, flags);
- channel->cb = NULL;
- spin_unlock_irqrestore(&channel->recv_lock, flags);
+ qcom_smd_channel_set_callback(channel, NULL);
/* Wake up any sleepers in qcom_smd_send() */
wake_up_interruptible(&channel->fblockread_event);
@@ -872,15 +912,14 @@ static int qcom_smd_dev_remove(struct device *dev)
qsdrv->remove(qsdev);
/*
- * The client is now gone, cleanup and reset the channel state.
+ * The client is now gone, close and release all channels associated
+ * with this sdev
*/
- channel->qsdev = NULL;
- kfree(channel->bounce_buffer);
- channel->bounce_buffer = NULL;
-
- qcom_smd_channel_set_state(channel, SMD_CHANNEL_CLOSED);
-
- qcom_smd_channel_reset(channel);
+ list_for_each_entry_safe(ch, tmp, &channel->dev_list, dev_list) {
+ qcom_smd_channel_close(ch);
+ list_del(&ch->dev_list);
+ ch->qsdev = NULL;
+ }
return 0;
}
@@ -996,6 +1035,18 @@ int qcom_smd_driver_register(struct qcom_smd_driver *qsdrv)
}
EXPORT_SYMBOL(qcom_smd_driver_register);
+void *qcom_smd_get_drvdata(struct qcom_smd_channel *channel)
+{
+ return channel->drvdata;
+}
+EXPORT_SYMBOL(qcom_smd_get_drvdata);
+
+void qcom_smd_set_drvdata(struct qcom_smd_channel *channel, void *data)
+{
+ channel->drvdata = data;
+}
+EXPORT_SYMBOL(qcom_smd_set_drvdata);
+
/**
* qcom_smd_driver_unregister - unregister a smd driver
* @qsdrv: qcom_smd_driver struct
@@ -1006,6 +1057,78 @@ void qcom_smd_driver_unregister(struct qcom_smd_driver *qsdrv)
}
EXPORT_SYMBOL(qcom_smd_driver_unregister);
+static struct qcom_smd_channel *
+qcom_smd_find_channel(struct qcom_smd_edge *edge, const char *name)
+{
+ struct qcom_smd_channel *channel;
+ struct qcom_smd_channel *ret = NULL;
+ unsigned long flags;
+ unsigned state;
+
+ spin_lock_irqsave(&edge->channels_lock, flags);
+ list_for_each_entry(channel, &edge->channels, list) {
+ if (strcmp(channel->name, name))
+ continue;
+
+ state = GET_RX_CHANNEL_INFO(channel, state);
+ if (state != SMD_CHANNEL_OPENING &&
+ state != SMD_CHANNEL_OPENED)
+ continue;
+
+ ret = channel;
+ break;
+ }
+ spin_unlock_irqrestore(&edge->channels_lock, flags);
+
+ return ret;
+}
+
+/**
+ * qcom_smd_open_channel() - claim additional channels on the same edge
+ * @sdev: smd_device handle
+ * @name: channel name
+ * @cb: callback method to use for incoming data
+ *
+ * Returns a channel handle on success, or -EPROBE_DEFER if the channel isn't
+ * ready.
+ */
+struct qcom_smd_channel *qcom_smd_open_channel(struct qcom_smd_channel *parent,
+ const char *name,
+ qcom_smd_cb_t cb)
+{
+ struct qcom_smd_channel *channel;
+ struct qcom_smd_device *sdev = parent->qsdev;
+ struct qcom_smd_edge *edge = parent->edge;
+ int ret;
+
+ /* Wait up to HZ for the channel to appear */
+ ret = wait_event_interruptible_timeout(edge->new_channel_event,
+ (channel = qcom_smd_find_channel(edge, name)) != NULL,
+ HZ);
+ if (!ret)
+ return ERR_PTR(-ETIMEDOUT);
+
+ if (channel->state != SMD_CHANNEL_CLOSED) {
+ dev_err(&sdev->dev, "channel %s is busy\n", channel->name);
+ return ERR_PTR(-EBUSY);
+ }
+
+ channel->qsdev = sdev;
+ ret = qcom_smd_channel_open(channel, cb);
+ if (ret) {
+ channel->qsdev = NULL;
+ return ERR_PTR(ret);
+ }
+
+ /*
+ * Append the list of channel to the channels associated with the sdev
+ */
+ list_add_tail(&channel->dev_list, &sdev->channel->dev_list);
+
+ return channel;
+}
+EXPORT_SYMBOL(qcom_smd_open_channel);
+
/*
* Allocate the qcom_smd_channel object for a newly found smd channel,
* retrieving and validating the smem items involved.
@@ -1027,6 +1150,7 @@ static struct qcom_smd_channel *qcom_smd_create_channel(struct qcom_smd_edge *ed
if (!channel)
return ERR_PTR(-ENOMEM);
+ INIT_LIST_HEAD(&channel->dev_list);
channel->edge = edge;
channel->name = devm_kstrdup(smd->dev, name, GFP_KERNEL);
if (!channel->name)
@@ -1089,8 +1213,9 @@ free_name_and_channel:
* qcom_smd_create_channel() to create representations of these and add
* them to the edge's list of channels.
*/
-static void qcom_discover_channels(struct qcom_smd_edge *edge)
+static void qcom_channel_scan_worker(struct work_struct *work)
{
+ struct qcom_smd_edge *edge = container_of(work, struct qcom_smd_edge, scan_work);
struct qcom_smd_alloc_entry *alloc_tbl;
struct qcom_smd_alloc_entry *entry;
struct qcom_smd_channel *channel;
@@ -1140,10 +1265,12 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge)
dev_dbg(smd->dev, "new channel found: '%s'\n", channel->name);
set_bit(i, edge->allocated[tbl]);
+
+ wake_up_interruptible(&edge->new_channel_event);
}
}
- schedule_work(&edge->work);
+ schedule_work(&edge->state_work);
}
/*
@@ -1151,29 +1278,23 @@ static void qcom_discover_channels(struct qcom_smd_edge *edge)
* then scans all registered channels for state changes that should be handled
* by creating or destroying smd client devices for the registered channels.
*
- * LOCKING: edge->channels_lock is not needed to be held during the traversal
- * of the channels list as it's done synchronously with the only writer.
+ * LOCKING: edge->channels_lock only needs to cover the list operations, as the
+ * worker is killed before any channels are deallocated
*/
static void qcom_channel_state_worker(struct work_struct *work)
{
struct qcom_smd_channel *channel;
struct qcom_smd_edge *edge = container_of(work,
struct qcom_smd_edge,
- work);
+ state_work);
unsigned remote_state;
-
- /*
- * Rescan smem if we have reason to belive that there are new channels.
- */
- if (edge->need_rescan) {
- edge->need_rescan = false;
- qcom_discover_channels(edge);
- }
+ unsigned long flags;
/*
* Register a device for any closed channel where the remote processor
* is showing interest in opening the channel.
*/
+ spin_lock_irqsave(&edge->channels_lock, flags);
list_for_each_entry(channel, &edge->channels, list) {
if (channel->state != SMD_CHANNEL_CLOSED)
continue;
@@ -1183,7 +1304,9 @@ static void qcom_channel_state_worker(struct work_struct *work)
remote_state != SMD_CHANNEL_OPENED)
continue;
+ spin_unlock_irqrestore(&edge->channels_lock, flags);
qcom_smd_create_device(channel);
+ spin_lock_irqsave(&edge->channels_lock, flags);
}
/*
@@ -1200,8 +1323,11 @@ static void qcom_channel_state_worker(struct work_struct *work)
remote_state == SMD_CHANNEL_OPENED)
continue;
+ spin_unlock_irqrestore(&edge->channels_lock, flags);
qcom_smd_destroy_device(channel);
+ spin_lock_irqsave(&edge->channels_lock, flags);
}
+ spin_unlock_irqrestore(&edge->channels_lock, flags);
}
/*
@@ -1219,7 +1345,8 @@ static int qcom_smd_parse_edge(struct device *dev,
INIT_LIST_HEAD(&edge->channels);
spin_lock_init(&edge->channels_lock);
- INIT_WORK(&edge->work, qcom_channel_state_worker);
+ INIT_WORK(&edge->scan_work, qcom_channel_scan_worker);
+ INIT_WORK(&edge->state_work, qcom_channel_state_worker);
edge->of_node = of_node_get(node);
@@ -1303,13 +1430,13 @@ static int qcom_smd_probe(struct platform_device *pdev)
for_each_available_child_of_node(pdev->dev.of_node, node) {
edge = &smd->edges[i++];
edge->smd = smd;
+ init_waitqueue_head(&edge->new_channel_event);
ret = qcom_smd_parse_edge(&pdev->dev, node, edge);
if (ret)
continue;
- edge->need_rescan = true;
- schedule_work(&edge->work);
+ schedule_work(&edge->scan_work);
}
platform_set_drvdata(pdev, smd);
@@ -1332,8 +1459,10 @@ static int qcom_smd_remove(struct platform_device *pdev)
edge = &smd->edges[i];
disable_irq(edge->irq);
- cancel_work_sync(&edge->work);
+ cancel_work_sync(&edge->scan_work);
+ cancel_work_sync(&edge->state_work);
+ /* No need to lock here, because the writer is gone */
list_for_each_entry(channel, &edge->channels, list) {
if (!channel->qsdev)
continue;
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 19019aa092e8..2e1aa9f130f4 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -684,8 +684,7 @@ static int qcom_smem_map_memory(struct qcom_smem *smem, struct device *dev,
smem->regions[i].aux_base = (u32)r.start;
smem->regions[i].size = resource_size(&r);
- smem->regions[i].virt_base = devm_ioremap_nocache(dev, r.start,
- resource_size(&r));
+ smem->regions[i].virt_base = devm_ioremap_wc(dev, r.start, resource_size(&r));
if (!smem->regions[i].virt_base)
return -ENOMEM;
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index 1fcbb22a4a1c..f9d7a85b2822 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -2,6 +2,8 @@
* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
* Copyright (c) 2014,2015, Linaro Ltd.
*
+ * SAW power controller driver
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
* only version 2 as published by the Free Software Foundation.
@@ -12,7 +14,6 @@
* GNU General Public License for more details.
*/
-#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -378,8 +379,5 @@ static struct platform_driver spm_driver = {
.of_match_table = spm_match_table,
},
};
-module_platform_driver(spm_driver);
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("SAW power controller driver");
-MODULE_ALIAS("platform:saw");
+builtin_platform_driver(spm_driver);
diff --git a/drivers/soc/qcom/wcnss_ctrl.c b/drivers/soc/qcom/wcnss_ctrl.c
index 7a986f881d5c..c544f3d2c6ee 100644
--- a/drivers/soc/qcom/wcnss_ctrl.c
+++ b/drivers/soc/qcom/wcnss_ctrl.c
@@ -100,17 +100,17 @@ struct wcnss_download_nv_resp {
/**
* wcnss_ctrl_smd_callback() - handler from SMD responses
- * @qsdev: smd device handle
+ * @channel: smd channel handle
* @data: pointer to the incoming data packet
* @count: size of the incoming data packet
*
* Handles any incoming packets from the remote WCNSS_CTRL service.
*/
-static int wcnss_ctrl_smd_callback(struct qcom_smd_device *qsdev,
+static int wcnss_ctrl_smd_callback(struct qcom_smd_channel *channel,
const void *data,
size_t count)
{
- struct wcnss_ctrl *wcnss = dev_get_drvdata(&qsdev->dev);
+ struct wcnss_ctrl *wcnss = qcom_smd_get_drvdata(channel);
const struct wcnss_download_nv_resp *nvresp;
const struct wcnss_version_resp *version;
const struct wcnss_msg_hdr *hdr = data;
@@ -246,7 +246,7 @@ static int wcnss_ctrl_probe(struct qcom_smd_device *sdev)
init_completion(&wcnss->ack);
INIT_WORK(&wcnss->download_nv_work, wcnss_download_nv);
- dev_set_drvdata(&sdev->dev, wcnss);
+ qcom_smd_set_drvdata(sdev->channel, wcnss);
return wcnss_request_version(wcnss);
}