spi: fsl-espi: improve and extend register bit definitions

Add definition of further register bits for use in upcoming
driver extensions and improve current bit definitions:
- use BIT macro
- use bit names as in the chip spec

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 33 insertions, 19 deletions

diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index 328b04a36328..a7984aeede6b 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -37,18 +37,18 @@
 #define ESPI_SPMODEx(x)	(ESPI_SPMODE0 + (x) * 4)
 
 /* eSPI Controller mode register definitions */
-#define SPMODE_ENABLE		(1 << 31)
-#define SPMODE_LOOP		(1 << 30)
+#define SPMODE_ENABLE		BIT(31)
+#define SPMODE_LOOP		BIT(30)
 #define SPMODE_TXTHR(x)		((x) << 8)
 #define SPMODE_RXTHR(x)		((x) << 0)
 
 /* eSPI Controller CS mode register definitions */
-#define CSMODE_CI_INACTIVEHIGH	(1 << 31)
-#define CSMODE_CP_BEGIN_EDGECLK	(1 << 30)
-#define CSMODE_REV		(1 << 29)
-#define CSMODE_DIV16		(1 << 28)
+#define CSMODE_CI_INACTIVEHIGH	BIT(31)
+#define CSMODE_CP_BEGIN_EDGECLK	BIT(30)
+#define CSMODE_REV		BIT(29)
+#define CSMODE_DIV16		BIT(28)
 #define CSMODE_PM(x)		((x) << 24)
-#define CSMODE_POL_1		(1 << 20)
+#define CSMODE_POL_1		BIT(20)
 #define CSMODE_LEN(x)		((x) << 16)
 #define CSMODE_BEF(x)		((x) << 12)
 #define CSMODE_AFT(x)		((x) << 8)
@@ -60,18 +60,32 @@
 		| CSMODE_AFT(0) | CSMODE_CG(1))
 
 /* SPIE register values */
-#define	SPIE_NE		0x00000200	/* Not empty */
-#define	SPIE_NF		0x00000100	/* Not full */
-
-/* SPIM register values */
-#define	SPIM_NE		0x00000200	/* Not empty */
-#define	SPIM_NF		0x00000100	/* Not full */
 #define SPIE_RXCNT(reg)     ((reg >> 24) & 0x3F)
 #define SPIE_TXCNT(reg)     ((reg >> 16) & 0x3F)
+#define	SPIE_TXE		BIT(15)	/* TX FIFO empty */
+#define	SPIE_DON		BIT(14)	/* TX done */
+#define	SPIE_RXT		BIT(13)	/* RX FIFO threshold */
+#define	SPIE_RXF		BIT(12)	/* RX FIFO full */
+#define	SPIE_TXT		BIT(11)	/* TX FIFO threshold*/
+#define	SPIE_RNE		BIT(9)	/* RX FIFO not empty */
+#define	SPIE_TNF		BIT(8)	/* TX FIFO not full */
+
+/* SPIM register values */
+#define	SPIM_TXE		BIT(15)	/* TX FIFO empty */
+#define	SPIM_DON		BIT(14)	/* TX done */
+#define	SPIM_RXT		BIT(13)	/* RX FIFO threshold */
+#define	SPIM_RXF		BIT(12)	/* RX FIFO full */
+#define	SPIM_TXT		BIT(11)	/* TX FIFO threshold*/
+#define	SPIM_RNE		BIT(9)	/* RX FIFO not empty */
+#define	SPIM_TNF		BIT(8)	/* TX FIFO not full */
 
 /* SPCOM register values */
 #define SPCOM_CS(x)		((x) << 30)
+#define SPCOM_DO		BIT(28) /* Dual output */
+#define SPCOM_TO		BIT(27) /* TX only */
+#define SPCOM_RXSKIP(x)		((x) << 16)
 #define SPCOM_TRANLEN(x)	((x) << 0)
+
 #define	SPCOM_TRANLEN_MAX	0x10000	/* Max transaction length */
 
 #define AUTOSUSPEND_TIMEOUT 2000
@@ -263,7 +277,7 @@ static int fsl_espi_bufs(struct spi_device *spi, struct spi_transfer *t)
 		(SPCOM_CS(spi->chip_select) | SPCOM_TRANLEN(t->len - 1)));
 
 	/* enable rx ints */
-	fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_NE);
+	fsl_espi_write_reg(mpc8xxx_spi, ESPI_SPIM, SPIM_RNE);
 
 	/* transmit word */
 	word = mpc8xxx_spi->get_tx(mpc8xxx_spi);
@@ -405,7 +419,7 @@ static void fsl_espi_cleanup(struct spi_device *spi)
 static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
 {
 	/* We need handle RX first */
-	if (events & SPIE_NE) {
+	if (events & SPIE_RNE) {
 		u32 rx_data, tmp;
 		u8 rx_data_8;
 		int rx_nr_bytes = 4;
@@ -427,7 +441,7 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
 			rx_data = fsl_espi_read_reg(mspi, ESPI_SPIRF);
 		} else if (mspi->len <= 0) {
 			dev_err(mspi->dev,
-				"unexpected RX(SPIE_NE) interrupt occurred,\n"
+				"unexpected RX(SPIE_RNE) interrupt occurred,\n"
 				"(local rxlen %d bytes, reg rxlen %d bytes)\n",
 				min(4, mspi->len), SPIE_RXCNT(events));
 			rx_nr_bytes = 0;
@@ -450,14 +464,14 @@ static void fsl_espi_cpu_irq(struct mpc8xxx_spi *mspi, u32 events)
 			mspi->get_rx(rx_data, mspi);
 	}
 
-	if (!(events & SPIE_NF)) {
+	if (!(events & SPIE_TNF)) {
 		int ret;
 
 		/* spin until TX is done */
 		ret = spin_event_timeout(((events = fsl_espi_read_reg(
-				mspi, ESPI_SPIE)) & SPIE_NF), 1000, 0);
+				mspi, ESPI_SPIE)) & SPIE_TNF), 1000, 0);
 		if (!ret) {
-			dev_err(mspi->dev, "tired waiting for SPIE_NF\n");
+			dev_err(mspi->dev, "tired waiting for SPIE_TNF\n");
 			complete(&mspi->done);
 			return;
 		}