staging/atomisp: Add support for the Intel IPU v2

This patch adds support for the Intel IPU v2 as found on Android and IoT
Baytrail-T and Baytrail-CR platforms (those with the IPU PCI mapped). You
will also need the firmware files from your device (Android usually puts
them into /etc) - or you can find them in the downloadable restore/upgrade
kits if you blew them away for some reason.

It may be possible to extend the driver to handle the BYT/T windows
platforms such as the ASUS T100TA. These platforms don't expose the IPU via
the PCI interface but via ACPI buried in the GPU description and with the
camera information somewhere unknown so would need a platform driver
interface adding to the codebase *IFF* the firmware works on such devices.

To get good results you also need a suitable support library such as
libxcam. The camera is intended to be driven from Android so it has a lot of
features that many desktop apps don't fully spport.

In theory all the pieces are there to build it with -DISP2401 and some
differing files to get CherryTrail/T support, but unifying the drivers
properlly is a work in progress.

The IPU driver represents the work of a lot of people within Intel over many
years. It's historical goal was portability rather than Linux upstream. Any
queries about the upstream aimed driver should be sent to me not to the
original authors.

Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 245 insertions, 0 deletions

diff --git a/drivers/staging/media/atomisp/pci/atomisp2/atomisp_file.c b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_file.c
new file mode 100644
index 000000000000..c766119bf798
--- /dev/null
+++ b/drivers/staging/media/atomisp/pci/atomisp2/atomisp_file.c
@@ -0,0 +1,245 @@
+/*
+ * Support for Medifield PNW Camera Imaging ISP subsystem.
+ *
+ * Copyright (c) 2010 Intel Corporation. All Rights Reserved.
+ *
+ * Copyright (c) 2010 Silicon Hive www.siliconhive.com.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <media/v4l2-event.h>
+#include <media/v4l2-mediabus.h>
+
+#include <media/videobuf-vmalloc.h>
+#include <linux/delay.h>
+
+#include "ia_css.h"
+
+#include "atomisp_cmd.h"
+#include "atomisp_common.h"
+#include "atomisp_file.h"
+#include "atomisp_internal.h"
+#include "atomisp_ioctl.h"
+
+static void file_work(struct work_struct *work)
+{
+	struct atomisp_file_device *file_dev =
+			container_of(work, struct atomisp_file_device, work);
+	struct atomisp_device *isp = file_dev->isp;
+	/* only support file injection on subdev0 */
+	struct atomisp_sub_device *asd = &isp->asd[0];
+	struct atomisp_video_pipe *out_pipe = &asd->video_in;
+	unsigned short *buf = videobuf_to_vmalloc(out_pipe->outq.bufs[0]);
+	struct v4l2_mbus_framefmt isp_sink_fmt;
+
+	if (asd->streaming != ATOMISP_DEVICE_STREAMING_ENABLED)
+		return;
+
+	dev_dbg(isp->dev, ">%s: ready to start streaming\n", __func__);
+	isp_sink_fmt = *atomisp_subdev_get_ffmt(&asd->subdev, NULL,
+						V4L2_SUBDEV_FORMAT_ACTIVE,
+						ATOMISP_SUBDEV_PAD_SINK);
+
+	while (!atomisp_css_isp_has_started())
+		usleep_range(1000, 1500);
+
+	atomisp_css_send_input_frame(asd, buf, isp_sink_fmt.width,
+				     isp_sink_fmt.height);
+	dev_dbg(isp->dev, "<%s: streaming done\n", __func__);
+}
+
+static int file_input_s_stream(struct v4l2_subdev *sd, int enable)
+{
+	struct atomisp_file_device *file_dev = v4l2_get_subdevdata(sd);
+	struct atomisp_device *isp = file_dev->isp;
+	/* only support file injection on subdev0 */
+	struct atomisp_sub_device *asd = &isp->asd[0];
+
+	dev_dbg(isp->dev, "%s: enable %d\n", __func__, enable);
+	if (enable) {
+		if (asd->streaming != ATOMISP_DEVICE_STREAMING_ENABLED)
+			return 0;
+
+		queue_work(file_dev->work_queue, &file_dev->work);
+		return 0;
+	}
+	cancel_work_sync(&file_dev->work);
+	return 0;
+}
+
+static int file_input_g_parm(struct v4l2_subdev *sd,
+		struct v4l2_streamparm *param)
+{
+	/*to fake*/
+	return 0;
+}
+
+static int file_input_s_parm(struct v4l2_subdev *sd,
+		struct v4l2_streamparm *param)
+{
+	/*to fake*/
+	return 0;
+}
+
+static int file_input_get_fmt(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt = &format->format;
+	struct atomisp_file_device *file_dev = v4l2_get_subdevdata(sd);
+	struct atomisp_device *isp = file_dev->isp;
+	/* only support file injection on subdev0 */
+	struct atomisp_sub_device *asd = &isp->asd[0];
+	struct v4l2_mbus_framefmt *isp_sink_fmt;
+	if (format->pad)
+		return -EINVAL;
+	isp_sink_fmt = atomisp_subdev_get_ffmt(&asd->subdev, NULL,
+					       V4L2_SUBDEV_FORMAT_ACTIVE,
+					       ATOMISP_SUBDEV_PAD_SINK);
+
+	fmt->width = isp_sink_fmt->width;
+	fmt->height = isp_sink_fmt->height;
+	fmt->code = isp_sink_fmt->code;
+
+	return 0;
+}
+
+static int file_input_set_fmt(struct v4l2_subdev *sd,
+			      struct v4l2_subdev_pad_config *cfg,
+			      struct v4l2_subdev_format *format)
+{
+	struct v4l2_mbus_framefmt *fmt = &format->format;
+	if (format->pad)
+		return -EINVAL;
+	file_input_get_fmt(sd, cfg, format);
+	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
+		cfg->try_fmt = *fmt;
+	return 0;
+}
+
+static int file_input_log_status(struct v4l2_subdev *sd)
+{
+	/*to fake*/
+	return 0;
+}
+
+static int file_input_s_power(struct v4l2_subdev *sd, int on)
+{
+	/* to fake */
+	return 0;
+}
+
+static int file_input_enum_mbus_code(struct v4l2_subdev *sd,
+				     struct v4l2_subdev_pad_config *cfg,
+				     struct v4l2_subdev_mbus_code_enum *code)
+{
+	/*to fake*/
+	return 0;
+}
+
+static int file_input_enum_frame_size(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_pad_config *cfg,
+				      struct v4l2_subdev_frame_size_enum *fse)
+{
+	/*to fake*/
+	return 0;
+}
+
+static int file_input_enum_frame_ival(struct v4l2_subdev *sd,
+				      struct v4l2_subdev_pad_config *cfg,
+				      struct v4l2_subdev_frame_interval_enum
+				      *fie)
+{
+	/*to fake*/
+	return 0;
+}
+
+static const struct v4l2_subdev_video_ops file_input_video_ops = {
+	.s_stream = file_input_s_stream,
+	.g_parm = file_input_g_parm,
+	.s_parm = file_input_s_parm,
+};
+
+static const struct v4l2_subdev_core_ops file_input_core_ops = {
+	.log_status = file_input_log_status,
+	.s_power = file_input_s_power,
+};
+
+static const struct v4l2_subdev_pad_ops file_input_pad_ops = {
+	.enum_mbus_code = file_input_enum_mbus_code,
+	.enum_frame_size = file_input_enum_frame_size,
+	.enum_frame_interval = file_input_enum_frame_ival,
+	.get_fmt = file_input_get_fmt,
+	.set_fmt = file_input_set_fmt,
+};
+
+static const struct v4l2_subdev_ops file_input_ops = {
+	.core = &file_input_core_ops,
+	.video = &file_input_video_ops,
+	.pad = &file_input_pad_ops,
+};
+
+void
+atomisp_file_input_unregister_entities(struct atomisp_file_device *file_dev)
+{
+	media_entity_cleanup(&file_dev->sd.entity);
+	v4l2_device_unregister_subdev(&file_dev->sd);
+}
+
+int atomisp_file_input_register_entities(struct atomisp_file_device *file_dev,
+			struct v4l2_device *vdev)
+{
+	/* Register the subdev and video nodes. */
+	return  v4l2_device_register_subdev(vdev, &file_dev->sd);
+}
+
+void atomisp_file_input_cleanup(struct atomisp_device *isp)
+{
+	struct atomisp_file_device *file_dev = &isp->file_dev;
+
+	if (file_dev->work_queue) {
+		destroy_workqueue(file_dev->work_queue);
+		file_dev->work_queue = NULL;
+	}
+}
+
+int atomisp_file_input_init(struct atomisp_device *isp)
+{
+	struct atomisp_file_device *file_dev = &isp->file_dev;
+	struct v4l2_subdev *sd = &file_dev->sd;
+	struct media_pad *pads = file_dev->pads;
+	struct media_entity *me = &sd->entity;
+
+	file_dev->isp = isp;
+	file_dev->work_queue = alloc_workqueue(isp->v4l2_dev.name, 0, 1);
+	if (file_dev->work_queue == NULL) {
+		dev_err(isp->dev, "Failed to initialize file inject workq\n");
+		return -ENOMEM;
+	}
+
+	INIT_WORK(&file_dev->work, file_work);
+
+	v4l2_subdev_init(sd, &file_input_ops);
+	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
+	strcpy(sd->name, "file_input_subdev");
+	v4l2_set_subdevdata(sd, file_dev);
+
+	pads[0].flags = MEDIA_PAD_FL_SINK;
+	me->function = MEDIA_ENT_F_V4L2_SUBDEV_UNKNOWN;
+
+	return media_entity_pads_init(me, 1, pads);
+}