Merge tag 'asoc-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.2

This is a pretty huge set of changes, it's been a pretty active release
all round but the big thing with this release is the Sound Open Firmware
changes from Intel, providing another DSP framework for use with the
DSPs in their SoCs.  This one works with the firmware of the same name
which is free software (unlike the previous DSP firmwares and framework)
and there has been some interest in adoption by other systems already so
hopefully we will see adoption by other vendors in the future.

Other highlights include:

 - Support for MCLK/sample rate ratio setting in the generic cards.
 - Support for pin switches in the generic cards.
 - A big set of improvements to the TLV320AIC32x4 drivers from Annaliese
   McDermond.
 - New drivers for Freescale audio mixers, several Intel machines,
   several Mediatek machines, Meson G12A, Sound Open Firmware and
   Spreadtrum compressed audio and DMA devices.

1 files changed, 0 insertions, 48 deletions

diff --git a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt b/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt
deleted file mode 100644
index 596b38552697..000000000000
--- a/drivers/staging/mt7621-eth/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Mediatek Gigabit Switch
-=======================
-
-The mediatek gigabit switch can be found on Mediatek SoCs.
-
-Required properties:
-- compatible: Should be "mediatek,mt7620-gsw", "mediatek,mt7621-gsw",
-  "mediatek,mt7623-gsw"
-- reg: Address and length of the register set for the device
-- interrupts: Should contain the gigabit switches interrupt
-
-
-Additional required properties for ARM based SoCs:
-- mediatek,reset-pin: phandle describing the reset GPIO
-- clocks: the clocks used by the switch
-- clock-names: the names of the clocks listed in the clocks property
-  these should be "trgpll", "esw", "gp2", "gp1"
-- mt7530-supply: the phandle of the regulator used to power the switch
-- mediatek,pctl-regmap: phandle to the port control regmap. this is used to
-  setup the drive current
-
-
-Optional properties:
-- interrupt-parent: Should be the phandle for the interrupt controller
-  that services interrupts for this device
-
-Example:
-
-gsw: switch@1b100000 {
-	compatible = "mediatek,mt7623-gsw";
-	reg = <0 0x1b110000 0 0x300000>;
-
-	interrupt-parent = <&pio>;
-	interrupts = <168 IRQ_TYPE_EDGE_RISING>;
-
-	clocks = <&apmixedsys CLK_APMIXED_TRGPLL>,
-		 <&ethsys CLK_ETHSYS_ESW>,
-		 <&ethsys CLK_ETHSYS_GP2>,
-		 <&ethsys CLK_ETHSYS_GP1>;
-	clock-names = "trgpll", "esw", "gp2", "gp1";
-
-	mt7530-supply = <&mt6323_vpa_reg>;
-
-	mediatek,pctl-regmap = <&syscfg_pctl_a>;
-	mediatek,reset-pin = <&pio 15 0>;
-
-	status = "okay";
-};