Merge tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging/IIO driver updates from Greg KH:
 "Here is the big staging and IIO driver update for 4.14-rc1.

  Lots of staging driver fixes and cleanups, including some reorginizing
  of the lustre header files to try to impose some sanity on what is,
  and what is not, the uapi for that filesystem.

  There are some tty core changes in here as well, as the speakup
  drivers need them, and that's ok with me, they are sane and the
  speakup code is getting nicer because of it.

  There is also the addition of the obiligatory new wifi driver, just
  because it has been a release or two since we added our last one...

  Other than that, lots and lots of small coding style fixes, as usual.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (612 commits)
  staging:rtl8188eu:core Fix remove unneccessary else block
  staging: typec: fusb302: make structure fusb302_psy_desc static
  staging: unisys: visorbus: make two functions static
  staging: fsl-dpaa2/eth: fix off-by-one FD ctrl bitmaks
  staging: r8822be: Simplify deinit_priv()
  staging: r8822be: Remove some dead code
  staging: vboxvideo: Use CONFIG_DRM_KMS_FB_HELPER to check for fbdefio availability
  staging:rtl8188eu Fix comparison to NULL
  staging: rts5208: rename mmc_ddr_tunning_rx_cmd to mmc_ddr_tuning_rx_cmd
  Staging: Pi433: style fix - tabs and spaces
  staging: pi433: fix spelling mistake: "preample" -> "preamble"
  staging:rtl8188eu:core Fix Code Indent
  staging: typec: fusb302: Export current-limit through a power_supply class dev
  staging: typec: fusb302: Add support for USB2 charger detection through extcon
  staging: typec: fusb302: Use client->irq as irq if set
  staging: typec: fusb302: Get max snk mv/ma/mw from device-properties
  staging: typec: fusb302: Set max supply voltage to 5V
  staging: typec: tcpm: Add get_current_limit tcpc_dev callback
  staging:rtl8188eu Use __func__ instead of function name
  staging: lustre: coding style fixes found by checkpatch.pl
  ...

1 files changed, 1007 insertions, 0 deletions

diff --git a/drivers/staging/rtlwifi/ps.c b/drivers/staging/rtlwifi/ps.c
new file mode 100644
index 000000000000..9172cee45f74
--- /dev/null
+++ b/drivers/staging/rtlwifi/ps.c
@@ -0,0 +1,1007 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2012  Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "ps.h"
+#include <linux/export.h>
+#include "btcoexist/rtl_btc.h"
+
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw));
+
+	/*<1> reset trx ring */
+	if (rtlhal->interface == INTF_PCI)
+		rtlpriv->intf_ops->reset_trx_ring(hw);
+
+	if (is_hal_stop(rtlhal))
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "Driver is already down!\n");
+
+	/*<2> Enable Adapter */
+	if (rtlpriv->cfg->ops->hw_init(hw))
+		return false;
+	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_RETRY_LIMIT,
+			&rtlmac->retry_long);
+	RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+
+	/*<2.1> Switch Channel & Bandwidth to last rtl_op_config setting*/
+	rtlpriv->cfg->ops->switch_channel(hw);
+	rtlpriv->cfg->ops->set_channel_access(hw);
+	rtlpriv->cfg->ops->set_bw_mode(hw,
+			cfg80211_get_chandef_type(&hw->conf.chandef));
+
+	/*<3> Enable Interrupt */
+	rtlpriv->cfg->ops->enable_interrupt(hw);
+
+	/*<enable timer> */
+	rtl_watch_dog_timer_callback((unsigned long)hw);
+
+	return true;
+}
+
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/*<1> Stop all timer */
+	rtl_deinit_deferred_work(hw);
+
+	/*<2> Disable Interrupt */
+	rtlpriv->cfg->ops->disable_interrupt(hw);
+	tasklet_kill(&rtlpriv->works.irq_tasklet);
+
+	/*<3> Disable Adapter */
+	rtlpriv->cfg->ops->hw_disable(hw);
+
+	return true;
+}
+
+static bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+				enum rf_pwrstate state_toset,
+				u32 changesource)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+	bool actionallowed = false;
+	u16 rfwait_cnt = 0;
+
+	/*Only one thread can change
+	 *the RF state at one time, and others
+	 *should wait to be executed.
+	 */
+	while (true) {
+		spin_lock(&rtlpriv->locks.rf_ps_lock);
+		if (ppsc->rfchange_inprogress) {
+			spin_unlock(&rtlpriv->locks.rf_ps_lock);
+
+			RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+				 "RF Change in progress! Wait to set..state_toset(%d).\n",
+				  state_toset);
+
+			/* Set RF after the previous action is done.  */
+			while (ppsc->rfchange_inprogress) {
+				rfwait_cnt++;
+				mdelay(1);
+				/*Wait too long, return false to avoid
+				 *to be stuck here.
+				 */
+				if (rfwait_cnt > 100)
+					return false;
+			}
+		} else {
+			ppsc->rfchange_inprogress = true;
+			spin_unlock(&rtlpriv->locks.rf_ps_lock);
+			break;
+		}
+	}
+
+	rtstate = ppsc->rfpwr_state;
+
+	switch (state_toset) {
+	case ERFON:
+		ppsc->rfoff_reason &= (~changesource);
+
+		if ((changesource == RF_CHANGE_BY_HW) &&
+		    (ppsc->hwradiooff)) {
+			ppsc->hwradiooff = false;
+		}
+
+		if (!ppsc->rfoff_reason) {
+			ppsc->rfoff_reason = 0;
+			actionallowed = true;
+		}
+		break;
+	case ERFOFF:
+		if ((changesource == RF_CHANGE_BY_HW) && !ppsc->hwradiooff)
+			ppsc->hwradiooff = true;
+
+		ppsc->rfoff_reason |= changesource;
+		actionallowed = true;
+		break;
+	case ERFSLEEP:
+		ppsc->rfoff_reason |= changesource;
+		actionallowed = true;
+		break;
+	default:
+		pr_err("switch case %#x not processed\n", state_toset);
+		break;
+	}
+
+	if (actionallowed)
+		rtlpriv->cfg->ops->set_rf_power_state(hw, state_toset);
+
+	spin_lock(&rtlpriv->locks.rf_ps_lock);
+	ppsc->rfchange_inprogress = false;
+	spin_unlock(&rtlpriv->locks.rf_ps_lock);
+
+	return actionallowed;
+}
+
+static void _rtl_ps_inactive_ps(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+	ppsc->swrf_processing = true;
+
+	if (ppsc->inactive_pwrstate == ERFON &&
+	    rtlhal->interface == INTF_PCI) {
+		if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+		    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
+		    rtlhal->interface == INTF_PCI) {
+			rtlpriv->intf_ops->disable_aspm(hw);
+			RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+		}
+	}
+
+	rtl_ps_set_rf_state(hw, ppsc->inactive_pwrstate,
+			    RF_CHANGE_BY_IPS);
+
+	if (ppsc->inactive_pwrstate == ERFOFF &&
+	    rtlhal->interface == INTF_PCI) {
+		if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
+		    !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
+			rtlpriv->intf_ops->enable_aspm(hw);
+			RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+		}
+	}
+
+	ppsc->swrf_processing = false;
+}
+
+void rtl_ips_nic_off_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks =
+	    container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+
+	if (mac->opmode != NL80211_IFTYPE_STATION) {
+		RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+			 "not station return\n");
+		return;
+	}
+
+	if (mac->p2p_in_use)
+		return;
+
+	if (mac->link_state > MAC80211_NOLINK)
+		return;
+
+	if (is_hal_stop(rtlhal))
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (rtlpriv->cfg->ops->bt_coex_off_before_lps)
+		rtlpriv->cfg->ops->bt_coex_off_before_lps(hw);
+
+	if (ppsc->inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		/*
+		 *Do not enter IPS in the following conditions:
+		 *(1) RF is already OFF or Sleep
+		 *(2) swrf_processing (indicates the IPS is still under going)
+		 *(3) Connectted (only disconnected can trigger IPS)
+		 *(4) IBSS (send Beacon)
+		 *(5) AP mode (send Beacon)
+		 *(6) monitor mode (rcv packet)
+		 */
+
+		if (rtstate == ERFON &&
+		    !ppsc->swrf_processing &&
+		    (mac->link_state == MAC80211_NOLINK) &&
+		    !mac->act_scanning) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+				 "IPSEnter(): Turn off RF\n");
+
+			ppsc->inactive_pwrstate = ERFOFF;
+			ppsc->in_powersavemode = true;
+
+			/* call before RF off */
+			if (rtlpriv->cfg->ops->get_btc_status())
+				rtlpriv->btcoexist.btc_ops->btc_ips_notify(rtlpriv,
+									ppsc->inactive_pwrstate);
+
+			/*rtl_pci_reset_trx_ring(hw); */
+			_rtl_ps_inactive_ps(hw);
+		}
+	}
+}
+
+void rtl_ips_nic_off(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	/* because when link with ap, mac80211 will ask us
+	 * to disable nic quickly after scan before linking,
+	 * this will cause link failed, so we delay 100ms here
+	 */
+	queue_delayed_work(rtlpriv->works.rtl_wq,
+			   &rtlpriv->works.ips_nic_off_wq, MSECS(100));
+}
+
+/* NOTICE: any opmode should exc nic_on, or disable without
+ * nic_on may something wrong, like adhoc TP
+ */
+void rtl_ips_nic_on(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	enum rf_pwrstate rtstate;
+
+	cancel_delayed_work(&rtlpriv->works.ips_nic_off_wq);
+
+	mutex_lock(&rtlpriv->locks.ips_mutex);
+	if (ppsc->inactiveps) {
+		rtstate = ppsc->rfpwr_state;
+
+		if (rtstate != ERFON &&
+		    !ppsc->swrf_processing &&
+		    ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {
+			ppsc->inactive_pwrstate = ERFON;
+			ppsc->in_powersavemode = false;
+			_rtl_ps_inactive_ps(hw);
+			/* call after RF on */
+			if (rtlpriv->phydm.ops)
+				rtlpriv->phydm.ops->phydm_reset_dm(rtlpriv);
+			if (rtlpriv->cfg->ops->get_btc_status())
+				rtlpriv->btcoexist.btc_ops->btc_ips_notify(rtlpriv,
+									ppsc->inactive_pwrstate);
+		}
+	}
+	mutex_unlock(&rtlpriv->locks.ips_mutex);
+}
+
+/*for FW LPS*/
+
+/*
+ *Determine if we can set Fw into PS mode
+ *in current condition.Return TRUE if it
+ *can enter PS mode.
+ */
+static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u32 ps_timediff;
+
+	ps_timediff = jiffies_to_msecs(jiffies -
+				       ppsc->last_delaylps_stamp_jiffies);
+
+	if (ps_timediff < 2000) {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+			 "Delay enter Fw LPS for DHCP, ARP, or EAPOL exchanging state\n");
+		return false;
+	}
+
+	if (mac->link_state != MAC80211_LINKED)
+		return false;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return false;
+
+	return true;
+}
+
+/* Change current and default preamble mode.*/
+void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	bool enter_fwlps;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	if (ppsc->dot11_psmode == rt_psmode && rt_psmode == EACTIVE)
+		return;
+
+	/* Update power save mode configured. */
+	ppsc->dot11_psmode = rt_psmode;
+
+	/*
+	 *<FW control LPS>
+	 *1. Enter PS mode
+	 *   Set RPWM to Fw to turn RF off and send H2C fw_pwrmode
+	 *   cmd to set Fw into PS mode.
+	 *2. Leave PS mode
+	 *   Send H2C fw_pwrmode cmd to Fw to set Fw into Active
+	 *   mode and set RPWM to turn RF on.
+	 */
+
+	if ((ppsc->fwctrl_lps) && ppsc->report_linked) {
+		if (ppsc->dot11_psmode == EACTIVE) {
+			RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+				 "FW LPS leave ps_mode:%x\n",
+				  FW_PS_ACTIVE_MODE);
+			enter_fwlps = false;
+			ppsc->pwr_mode = FW_PS_ACTIVE_MODE;
+			ppsc->smart_ps = 0;
+			rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_FW_LPS_ACTION,
+						      (u8 *)(&enter_fwlps));
+			if (ppsc->p2p_ps_info.opp_ps)
+				rtl_p2p_ps_cmd(hw, P2P_PS_ENABLE);
+
+			if (rtlpriv->cfg->ops->get_btc_status())
+				rtlpriv->btcoexist.btc_ops->btc_lps_notify(rtlpriv, rt_psmode);
+		} else {
+			if (rtl_get_fwlps_doze(hw)) {
+				RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+					 "FW LPS enter ps_mode:%x\n",
+					 ppsc->fwctrl_psmode);
+				if (rtlpriv->cfg->ops->get_btc_status())
+					rtlpriv->btcoexist.btc_ops->btc_lps_notify(rtlpriv, rt_psmode);
+				enter_fwlps = true;
+				ppsc->pwr_mode = ppsc->fwctrl_psmode;
+				ppsc->smart_ps = 2;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+							HW_VAR_FW_LPS_ACTION,
+							(u8 *)(&enter_fwlps));
+
+			} else {
+				/* Reset the power save related parameters. */
+				ppsc->dot11_psmode = EACTIVE;
+			}
+		}
+	}
+}
+
+/* Interrupt safe routine to enter the leisure power save mode.*/
+static void rtl_lps_enter_core(struct ieee80211_hw *hw)
+{
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (!ppsc->fwctrl_lps)
+		return;
+
+	if (rtlpriv->sec.being_setkey)
+		return;
+
+	if (rtlpriv->link_info.busytraffic)
+		return;
+
+	/*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+	if (mac->cnt_after_linked < 5)
+		return;
+
+	if (mac->opmode == NL80211_IFTYPE_ADHOC)
+		return;
+
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	mutex_lock(&rtlpriv->locks.lps_mutex);
+
+	/* Don't need to check (ppsc->dot11_psmode == EACTIVE), because
+	 * bt_ccoexist may ask to enter lps.
+	 * In normal case, this constraint move to rtl_lps_set_psmode().
+	 */
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+		 "Enter 802.11 power save mode...\n");
+	rtl_lps_set_psmode(hw, EAUTOPS);
+
+	mutex_unlock(&rtlpriv->locks.lps_mutex);
+}
+
+/* Interrupt safe routine to leave the leisure power save mode.*/
+static void rtl_lps_leave_core(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+	mutex_lock(&rtlpriv->locks.lps_mutex);
+
+	if (ppsc->fwctrl_lps) {
+		if (ppsc->dot11_psmode != EACTIVE) {
+			/*FIX ME */
+			/*rtlpriv->cfg->ops->enable_interrupt(hw); */
+
+			if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+			    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM) &&
+			    rtlhal->interface == INTF_PCI) {
+				rtlpriv->intf_ops->disable_aspm(hw);
+				RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+			}
+
+			RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+				 "Busy Traffic,Leave 802.11 power save..\n");
+
+			rtl_lps_set_psmode(hw, EACTIVE);
+		}
+	}
+	mutex_unlock(&rtlpriv->locks.lps_mutex);
+}
+
+/* For sw LPS*/
+void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct ieee80211_hdr *hdr = data;
+	struct ieee80211_tim_ie *tim_ie;
+	u8 *tim;
+	u8 tim_len;
+	bool u_buffed;
+	bool m_buffed;
+
+	if (mac->opmode != NL80211_IFTYPE_STATION)
+		return;
+
+	if (!rtlpriv->psc.swctrl_lps)
+		return;
+
+	if (rtlpriv->mac80211.link_state != MAC80211_LINKED)
+		return;
+
+	if (!rtlpriv->psc.sw_ps_enabled)
+		return;
+
+	if (rtlpriv->psc.fwctrl_lps)
+		return;
+
+	if (likely(!(hw->conf.flags & IEEE80211_CONF_PS)))
+		return;
+
+	/* check if this really is a beacon */
+	if (!ieee80211_is_beacon(hdr->frame_control))
+		return;
+
+	/* min. beacon length + FCS_LEN */
+	if (len <= 40 + FCS_LEN)
+		return;
+
+	/* and only beacons from the associated BSSID, please */
+	if (!ether_addr_equal_64bits(hdr->addr3, rtlpriv->mac80211.bssid))
+		return;
+
+	rtlpriv->psc.last_beacon = jiffies;
+
+	tim = rtl_find_ie(data, len - FCS_LEN, WLAN_EID_TIM);
+	if (!tim)
+		return;
+
+	if (tim[1] < sizeof(*tim_ie))
+		return;
+
+	tim_len = tim[1];
+	tim_ie = (struct ieee80211_tim_ie *)&tim[2];
+
+	if (!WARN_ON_ONCE(!hw->conf.ps_dtim_period))
+		rtlpriv->psc.dtim_counter = tim_ie->dtim_count;
+
+	/* Check whenever the PHY can be turned off again. */
+
+	/* 1. What about buffered unicast traffic for our AID? */
+	u_buffed = ieee80211_check_tim(tim_ie, tim_len,
+				       rtlpriv->mac80211.assoc_id);
+
+	/* 2. Maybe the AP wants to send multicast/broadcast data? */
+	m_buffed = tim_ie->bitmap_ctrl & 0x01;
+	rtlpriv->psc.multi_buffered = m_buffed;
+
+	/* unicast will process by mac80211 through
+	 * set ~IEEE80211_CONF_PS, So we just check
+	 * multicast frames here
+	 */
+	if (!m_buffed) {
+		/* back to low-power land. and delay is
+		 * prevent null power save frame tx fail
+		 */
+		queue_delayed_work(rtlpriv->works.rtl_wq,
+				   &rtlpriv->works.ps_work, MSECS(5));
+	} else {
+		RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+			 "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed);
+	}
+}
+
+void rtl_swlps_rf_awake(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+
+	if (!rtlpriv->psc.swctrl_lps)
+		return;
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+
+	if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+	    RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
+		rtlpriv->intf_ops->disable_aspm(hw);
+		RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+	}
+
+	mutex_lock(&rtlpriv->locks.lps_mutex);
+	rtl_ps_set_rf_state(hw, ERFON, RF_CHANGE_BY_PS);
+	mutex_unlock(&rtlpriv->locks.lps_mutex);
+}
+
+void rtl_swlps_rfon_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks =
+	    container_of_dwork_rtl(data, struct rtl_works, ps_rfon_wq);
+	struct ieee80211_hw *hw = rtlworks->hw;
+
+	rtl_swlps_rf_awake(hw);
+}
+
+void rtl_swlps_rf_sleep(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+	u8 sleep_intv;
+
+	if (!rtlpriv->psc.sw_ps_enabled)
+		return;
+
+	if ((rtlpriv->sec.being_setkey) ||
+	    (mac->opmode == NL80211_IFTYPE_ADHOC))
+		return;
+
+	/*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+	if ((mac->link_state != MAC80211_LINKED) || (mac->cnt_after_linked < 5))
+		return;
+
+	if (rtlpriv->link_info.busytraffic)
+		return;
+
+	spin_lock(&rtlpriv->locks.rf_ps_lock);
+	if (rtlpriv->psc.rfchange_inprogress) {
+		spin_unlock(&rtlpriv->locks.rf_ps_lock);
+		return;
+	}
+	spin_unlock(&rtlpriv->locks.rf_ps_lock);
+
+	mutex_lock(&rtlpriv->locks.lps_mutex);
+	rtl_ps_set_rf_state(hw, ERFSLEEP, RF_CHANGE_BY_PS);
+	mutex_unlock(&rtlpriv->locks.lps_mutex);
+
+	if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM &&
+	    !RT_IN_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM)) {
+		rtlpriv->intf_ops->enable_aspm(hw);
+		RT_SET_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM);
+	}
+
+	/* here is power save alg, when this beacon is DTIM
+	 * we will set sleep time to dtim_period * n;
+	 * when this beacon is not DTIM, we will set sleep
+	 * time to sleep_intv = rtlpriv->psc.dtim_counter or
+	 * MAX_SW_LPS_SLEEP_INTV(default set to 5)
+	 */
+
+	if (rtlpriv->psc.dtim_counter == 0) {
+		if (hw->conf.ps_dtim_period == 1)
+			sleep_intv = hw->conf.ps_dtim_period * 2;
+		else
+			sleep_intv = hw->conf.ps_dtim_period;
+	} else {
+		sleep_intv = rtlpriv->psc.dtim_counter;
+	}
+
+	if (sleep_intv > MAX_SW_LPS_SLEEP_INTV)
+		sleep_intv = MAX_SW_LPS_SLEEP_INTV;
+
+	/* this print should always be dtim_conter = 0 &
+	 * sleep  = dtim_period, that meaons, we should
+	 * awake before every dtim
+	 */
+	RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+		 "dtim_counter:%x will sleep :%d beacon_intv\n",
+		  rtlpriv->psc.dtim_counter, sleep_intv);
+
+	/* we tested that 40ms is enough for sw & hw sw delay */
+	queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_rfon_wq,
+			   MSECS(sleep_intv *
+				 mac->vif->bss_conf.beacon_int - 40));
+}
+
+void rtl_lps_change_work_callback(struct work_struct *work)
+{
+	struct rtl_works *rtlworks =
+	    container_of(work, struct rtl_works, lps_change_work);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (rtlpriv->enter_ps)
+		rtl_lps_enter_core(hw);
+	else
+		rtl_lps_leave_core(hw);
+}
+
+void rtl_lps_enter(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (!in_interrupt())
+		return rtl_lps_enter_core(hw);
+	rtlpriv->enter_ps = true;
+	schedule_work(&rtlpriv->works.lps_change_work);
+}
+
+void rtl_lps_leave(struct ieee80211_hw *hw)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+	if (!in_interrupt())
+		return rtl_lps_leave_core(hw);
+	rtlpriv->enter_ps = false;
+	schedule_work(&rtlpriv->works.lps_change_work);
+}
+
+void rtl_swlps_wq_callback(void *data)
+{
+	struct rtl_works *rtlworks = container_of_dwork_rtl(data,
+				     struct rtl_works,
+				     ps_work);
+	struct ieee80211_hw *hw = rtlworks->hw;
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	bool ps = false;
+
+	ps = (hw->conf.flags & IEEE80211_CONF_PS);
+
+	/* we can sleep after ps null send ok */
+	if (rtlpriv->psc.state_inap) {
+		rtl_swlps_rf_sleep(hw);
+
+		if (rtlpriv->psc.state && !ps) {
+			rtlpriv->psc.sleep_ms = jiffies_to_msecs(jiffies -
+						 rtlpriv->psc.last_action);
+		}
+
+		if (ps)
+			rtlpriv->psc.last_slept = jiffies;
+
+		rtlpriv->psc.last_action = jiffies;
+		rtlpriv->psc.state = ps;
+	}
+}
+
+static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data,
+			   unsigned int len)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct ieee80211_mgmt *mgmt = data;
+	struct rtl_p2p_ps_info *p2pinfo = &rtlpriv->psc.p2p_ps_info;
+	u8 *pos, *end, *ie;
+	u16 noa_len;
+	static u8 p2p_oui_ie_type[4] = {0x50, 0x6f, 0x9a, 0x09};
+	u8 noa_num, index, i, noa_index = 0;
+	bool find_p2p_ie = false, find_p2p_ps_ie = false;
+
+	pos = (u8 *)mgmt->u.beacon.variable;
+	end = data + len;
+	ie = NULL;
+
+	while (pos + 1 < end) {
+		if (pos + 2 + pos[1] > end)
+			return;
+
+		if (pos[0] == 221 && pos[1] > 4) {
+			if (memcmp(&pos[2], p2p_oui_ie_type, 4) == 0) {
+				ie = pos + 2 + 4;
+				break;
+			}
+		}
+		pos += 2 + pos[1];
+	}
+
+	if (!ie)
+		return;
+	find_p2p_ie = true;
+	/*to find noa ie*/
+	while (ie + 1 < end) {
+		noa_len = READEF2BYTE((__le16 *)&ie[1]);
+		if (ie + 3 + ie[1] > end)
+			return;
+
+		if (ie[0] == 12) {
+			find_p2p_ps_ie = true;
+			if ((noa_len - 2) % 13 != 0) {
+				RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+					 "P2P notice of absence: invalid length.%d\n",
+					 noa_len);
+				return;
+			}
+			noa_num = (noa_len - 2) / 13;
+			noa_index = ie[3];
+			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
+			    P2P_PS_NONE || noa_index != p2pinfo->noa_index) {
+				RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
+					 "update NOA ie.\n");
+				p2pinfo->noa_index = noa_index;
+				p2pinfo->opp_ps = (ie[4] >> 7);
+				p2pinfo->ctwindow = ie[4] & 0x7F;
+				p2pinfo->noa_num = noa_num;
+				index = 5;
+				for (i = 0; i < noa_num; i++) {
+					p2pinfo->noa_count_type[i] =
+					    READEF1BYTE(ie + index);
+					index += 1;
+					p2pinfo->noa_duration[i] =
+					     READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+					p2pinfo->noa_interval[i] =
+					    READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+					p2pinfo->noa_start_time[i] =
+					     READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+				}
+
+				if (p2pinfo->opp_ps == 1) {
+					p2pinfo->p2p_ps_mode = P2P_PS_CTWINDOW;
+					/* Driver should wait LPS entering
+					 * CTWindow
+					 */
+					if (rtlpriv->psc.fw_current_inpsmode)
+						rtl_p2p_ps_cmd(hw,
+							       P2P_PS_ENABLE);
+				} else if (p2pinfo->noa_num > 0) {
+					p2pinfo->p2p_ps_mode = P2P_PS_NOA;
+					rtl_p2p_ps_cmd(hw, P2P_PS_ENABLE);
+				} else if (p2pinfo->p2p_ps_mode > P2P_PS_NONE) {
+					rtl_p2p_ps_cmd(hw, P2P_PS_DISABLE);
+				}
+			}
+			break;
+		}
+		ie += 3 + noa_len;
+	}
+
+	if (find_p2p_ie) {
+		if ((p2pinfo->p2p_ps_mode > P2P_PS_NONE) &&
+		    (!find_p2p_ps_ie))
+			rtl_p2p_ps_cmd(hw, P2P_PS_DISABLE);
+	}
+}
+
+static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data,
+			      unsigned int len)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct ieee80211_mgmt *mgmt = data;
+	struct rtl_p2p_ps_info *p2pinfo = &rtlpriv->psc.p2p_ps_info;
+	u8 noa_num, index, i, noa_index = 0;
+	u8 *pos, *end, *ie;
+	u16 noa_len;
+	static u8 p2p_oui_ie_type[4] = {0x50, 0x6f, 0x9a, 0x09};
+
+	pos = (u8 *)&mgmt->u.action.category;
+	end = data + len;
+	ie = NULL;
+
+	if (pos[0] == 0x7f) {
+		if (memcmp(&pos[1], p2p_oui_ie_type, 4) == 0)
+			ie = pos + 3 + 4;
+	}
+
+	if (!ie)
+		return;
+
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n");
+	/*to find noa ie*/
+	while (ie + 1 < end) {
+		noa_len = READEF2BYTE((__le16 *)&ie[1]);
+		if (ie + 3 + ie[1] > end)
+			return;
+
+		if (ie[0] == 12) {
+			RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "find NOA IE.\n");
+			RT_PRINT_DATA(rtlpriv, COMP_FW, DBG_LOUD, "noa ie ",
+				      ie, noa_len);
+			if ((noa_len - 2) % 13 != 0) {
+				RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
+					 "P2P notice of absence: invalid length.%d\n",
+					 noa_len);
+				return;
+			}
+			noa_num = (noa_len - 2) / 13;
+			noa_index = ie[3];
+			if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode ==
+			    P2P_PS_NONE || noa_index != p2pinfo->noa_index) {
+				p2pinfo->noa_index = noa_index;
+				p2pinfo->opp_ps = (ie[4] >> 7);
+				p2pinfo->ctwindow = ie[4] & 0x7F;
+				p2pinfo->noa_num = noa_num;
+				index = 5;
+				for (i = 0; i < noa_num; i++) {
+					p2pinfo->noa_count_type[i] =
+					    READEF1BYTE(ie + index);
+					index += 1;
+					p2pinfo->noa_duration[i] =
+					     READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+					p2pinfo->noa_interval[i] =
+					     READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+					p2pinfo->noa_start_time[i] =
+					     READEF4BYTE((__le32 *)ie + index);
+					index += 4;
+				}
+
+				if (p2pinfo->opp_ps == 1) {
+					p2pinfo->p2p_ps_mode = P2P_PS_CTWINDOW;
+					/* Driver should wait LPS entering
+					 * CTWindow
+					 */
+					if (rtlpriv->psc.fw_current_inpsmode)
+						rtl_p2p_ps_cmd(hw,
+							       P2P_PS_ENABLE);
+				} else if (p2pinfo->noa_num > 0) {
+					p2pinfo->p2p_ps_mode = P2P_PS_NOA;
+					rtl_p2p_ps_cmd(hw, P2P_PS_ENABLE);
+				} else if (p2pinfo->p2p_ps_mode > P2P_PS_NONE) {
+					rtl_p2p_ps_cmd(hw, P2P_PS_DISABLE);
+				}
+			}
+			break;
+		}
+		ie += 3 + noa_len;
+	}
+}
+
+void rtl_p2p_ps_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw));
+	struct rtl_p2p_ps_info  *p2pinfo = &rtlpriv->psc.p2p_ps_info;
+
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "p2p state %x\n", p2p_ps_state);
+	switch (p2p_ps_state) {
+	case P2P_PS_DISABLE:
+		p2pinfo->p2p_ps_state = p2p_ps_state;
+		rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+					      &p2p_ps_state);
+		p2pinfo->noa_index = 0;
+		p2pinfo->ctwindow = 0;
+		p2pinfo->opp_ps = 0;
+		p2pinfo->noa_num = 0;
+		p2pinfo->p2p_ps_mode = P2P_PS_NONE;
+		if (rtlps->fw_current_inpsmode) {
+			if (rtlps->smart_ps == 0) {
+				rtlps->smart_ps = 2;
+				rtlpriv->cfg->ops->set_hw_reg(hw,
+					 HW_VAR_H2C_FW_PWRMODE,
+					 &rtlps->pwr_mode);
+			}
+		}
+		break;
+	case P2P_PS_ENABLE:
+		if (p2pinfo->p2p_ps_mode > P2P_PS_NONE) {
+			p2pinfo->p2p_ps_state = p2p_ps_state;
+
+			if (p2pinfo->ctwindow > 0) {
+				if (rtlps->smart_ps != 0) {
+					rtlps->smart_ps = 0;
+					rtlpriv->cfg->ops->set_hw_reg(hw,
+						 HW_VAR_H2C_FW_PWRMODE,
+						 &rtlps->pwr_mode);
+				}
+			}
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+				 HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+				 &p2p_ps_state);
+		}
+		break;
+	case P2P_PS_SCAN:
+	case P2P_PS_SCAN_DONE:
+	case P2P_PS_ALLSTASLEEP:
+		if (p2pinfo->p2p_ps_mode > P2P_PS_NONE) {
+			p2pinfo->p2p_ps_state = p2p_ps_state;
+			rtlpriv->cfg->ops->set_hw_reg(hw,
+				 HW_VAR_H2C_FW_P2P_PS_OFFLOAD,
+				 &p2p_ps_state);
+		}
+		break;
+	default:
+		break;
+	}
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
+		 "ctwindow %x oppps %x\n",
+		 p2pinfo->ctwindow, p2pinfo->opp_ps);
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD,
+		 "count %x duration %x index %x interval %x start time %x noa num %x\n",
+		 p2pinfo->noa_count_type[0],
+		 p2pinfo->noa_duration[0],
+		 p2pinfo->noa_index,
+		 p2pinfo->noa_interval[0],
+		 p2pinfo->noa_start_time[0],
+		 p2pinfo->noa_num);
+	RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "end\n");
+}
+
+void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len)
+{
+	struct rtl_priv *rtlpriv = rtl_priv(hw);
+	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+	struct ieee80211_hdr *hdr = data;
+
+	if (!mac->p2p)
+		return;
+	if (mac->link_state != MAC80211_LINKED)
+		return;
+	/* min. beacon length + FCS_LEN */
+	if (len <= 40 + FCS_LEN)
+		return;
+
+	/* and only beacons from the associated BSSID, please */
+	if (!ether_addr_equal_64bits(hdr->addr3, rtlpriv->mac80211.bssid))
+		return;
+
+	/* check if this really is a beacon */
+	if (!(ieee80211_is_beacon(hdr->frame_control) ||
+	      ieee80211_is_probe_resp(hdr->frame_control) ||
+	      ieee80211_is_action(hdr->frame_control)))
+		return;
+
+	if (ieee80211_is_action(hdr->frame_control))
+		rtl_p2p_action_ie(hw, data, len - FCS_LEN);
+	else
+		rtl_p2p_noa_ie(hw, data, len - FCS_LEN);
+}