thunderbolt: Add additional USB4 port operations for retimer access

When accessing retimers when there is no cable connected we are going to
need additional USB4 port operations. First the port needs to be put
into offline mode, and then the sideband channel transactions must be
enabled on the SBTX line. This adds support for these operations.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 69 insertions, 0 deletions

diff --git a/drivers/thunderbolt/usb4.c b/drivers/thunderbolt/usb4.c
index 1f82af35328e..8af96dbaa7a7 100644
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -1318,6 +1318,48 @@ static int usb4_port_sb_op(struct tb_port *port, enum usb4_sb_target target,
 	return -ETIMEDOUT;
 }
 
+static int usb4_port_set_router_offline(struct tb_port *port, bool offline)
+{
+	u32 val = !offline;
+	int ret;
+
+	ret = usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
+				  USB4_SB_METADATA, &val, sizeof(val));
+	if (ret)
+		return ret;
+
+	val = USB4_SB_OPCODE_ROUTER_OFFLINE;
+	return usb4_port_sb_write(port, USB4_SB_TARGET_ROUTER, 0,
+				  USB4_SB_OPCODE, &val, sizeof(val));
+}
+
+/**
+ * usb4_port_router_offline() - Put the USB4 port to offline mode
+ * @port: USB4 port
+ *
+ * This function puts the USB4 port into offline mode. In this mode the
+ * port does not react on hotplug events anymore. This needs to be
+ * called before retimer access is done when the USB4 links is not up.
+ *
+ * Returns %0 in case of success and negative errno if there was an
+ * error.
+ */
+int usb4_port_router_offline(struct tb_port *port)
+{
+	return usb4_port_set_router_offline(port, true);
+}
+
+/**
+ * usb4_port_router_online() - Put the USB4 port back to online
+ * @port: USB4 port
+ *
+ * Makes the USB4 port functional again.
+ */
+int usb4_port_router_online(struct tb_port *port)
+{
+	return usb4_port_set_router_offline(port, false);
+}
+
 /**
  * usb4_port_enumerate_retimers() - Send RT broadcast transaction
  * @port: USB4 port
@@ -1344,6 +1386,33 @@ static inline int usb4_port_retimer_op(struct tb_port *port, u8 index,
 }
 
 /**
+ * usb4_port_retimer_set_inbound_sbtx() - Enable sideband channel transactions
+ * @port: USB4 port
+ * @index: Retimer index
+ *
+ * Enables sideband channel transations on SBTX. Can be used when USB4
+ * link does not go up, for example if there is no device connected.
+ */
+int usb4_port_retimer_set_inbound_sbtx(struct tb_port *port, u8 index)
+{
+	int ret;
+
+	ret = usb4_port_retimer_op(port, index, USB4_SB_OPCODE_SET_INBOUND_SBTX,
+				   500);
+
+	if (ret != -ENODEV)
+		return ret;
+
+	/*
+	 * Per the USB4 retimer spec, the retimer is not required to
+	 * send an RT (Retimer Transaction) response for the first
+	 * SET_INBOUND_SBTX command
+	 */
+	return usb4_port_retimer_op(port, index, USB4_SB_OPCODE_SET_INBOUND_SBTX,
+				    500);
+}
+
+/**
  * usb4_port_retimer_read() - Read from retimer sideband registers
  * @port: USB4 port
  * @index: Retimer index