Merge tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of TTY/Serial driver updates and cleanups for
  6.9-rc1. Included in here are:

   - more tty cleanups from Jiri

   - loads of 8250 driver cleanups from Andy

   - max310x driver updates

   - samsung serial driver updates

   - uart_prepare_sysrq_char() updates for many drivers

   - platform driver remove callback void cleanups

   - stm32 driver updates

   - other small tty/serial driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'tty-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits)
  dt-bindings: serial: stm32: add power-domains property
  serial: 8250_dw: Replace ACPI device check by a quirk
  serial: Lock console when calling into driver before registration
  serial: 8250_uniphier: Switch to use uart_read_port_properties()
  serial: 8250_tegra: Switch to use uart_read_port_properties()
  serial: 8250_pxa: Switch to use uart_read_port_properties()
  serial: 8250_omap: Switch to use uart_read_port_properties()
  serial: 8250_of: Switch to use uart_read_port_properties()
  serial: 8250_lpc18xx: Switch to use uart_read_port_properties()
  serial: 8250_ingenic: Switch to use uart_read_port_properties()
  serial: 8250_dw: Switch to use uart_read_port_properties()
  serial: 8250_bcm7271: Switch to use uart_read_port_properties()
  serial: 8250_bcm2835aux: Switch to use uart_read_port_properties()
  serial: 8250_aspeed_vuart: Switch to use uart_read_port_properties()
  serial: port: Introduce a common helper to read properties
  serial: core: Add UPIO_UNKNOWN constant for unknown port type
  serial: core: Move struct uart_port::quirks closer to possible values
  serial: sh-sci: Call sci_serial_{in,out}() directly
  serial: core: only stop transmit when HW fifo is empty
  serial: pch: Use uart_prepare_sysrq_char().
  ...

1 files changed, 8 insertions, 16 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index cf2c890a560f..2fa3fb30dc6c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -348,10 +348,7 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap)
 				flag = TTY_FRAME;
 		}
 
-		uart_port_unlock(&uap->port);
-		sysrq = uart_handle_sysrq_char(&uap->port, ch & 255);
-		uart_port_lock(&uap->port);
-
+		sysrq = uart_prepare_sysrq_char(&uap->port, ch & 255);
 		if (!sysrq)
 			uart_insert_char(&uap->port, ch, UART011_DR_OE, ch, flag);
 	}
@@ -1017,7 +1014,7 @@ static void pl011_dma_rx_callback(void *data)
 	ret = pl011_dma_rx_trigger_dma(uap);
 
 	pl011_dma_rx_chars(uap, pending, lastbuf, false);
-	uart_port_unlock_irq(&uap->port);
+	uart_unlock_and_check_sysrq(&uap->port);
 	/*
 	 * Do this check after we picked the DMA chars so we don't
 	 * get some IRQ immediately from RX.
@@ -1540,11 +1537,10 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap)
 static irqreturn_t pl011_int(int irq, void *dev_id)
 {
 	struct uart_amba_port *uap = dev_id;
-	unsigned long flags;
 	unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
 	int handled = 0;
 
-	uart_port_lock_irqsave(&uap->port, &flags);
+	uart_port_lock(&uap->port);
 	status = pl011_read(uap, REG_RIS) & uap->im;
 	if (status) {
 		do {
@@ -1573,7 +1569,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
 		handled = 1;
 	}
 
-	uart_port_unlock_irqrestore(&uap->port, flags);
+	uart_unlock_and_check_sysrq(&uap->port);
 
 	return IRQ_RETVAL(handled);
 }
@@ -2322,13 +2318,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 
 	clk_enable(uap->clk);
 
-	local_irq_save(flags);
-	if (uap->port.sysrq)
-		locked = 0;
-	else if (oops_in_progress)
-		locked = uart_port_trylock(&uap->port);
+	if (oops_in_progress)
+		locked = uart_port_trylock_irqsave(&uap->port, &flags);
 	else
-		uart_port_lock(&uap->port);
+		uart_port_lock_irqsave(&uap->port, &flags);
 
 	/*
 	 *	First save the CR then disable the interrupts
@@ -2354,8 +2347,7 @@ pl011_console_write(struct console *co, const char *s, unsigned int count)
 		pl011_write(old_cr, uap, REG_CR);
 
 	if (locked)
-		uart_port_unlock(&uap->port);
-	local_irq_restore(flags);
+		uart_port_unlock_irqrestore(&uap->port, flags);
 
 	clk_disable(uap->clk);
 }