summaryrefslogtreecommitdiff
path: root/drivers/tty/serial/clps711x.c
diff options
context:
space:
mode:
authorAlexander Shiyan <shc_work@mail.ru>2012-10-14 11:05:24 +0400
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2012-10-24 11:39:47 -0700
commit117d5d424a1ee7aedaf6ad8b0ba6eff163c57815 (patch)
tree315be11a2597c1918509bf157815976eddec671a /drivers/tty/serial/clps711x.c
parent95113728f03cc6775ae895133c7fc420221cc8a4 (diff)
serial: clps711x: Convert all static variables to dynamic
This patch converts all static variables of clps711x serial driver to dynamic allocating. In this case we are should remove console_initcall() and declare console during driver registration. Early kernel messages can be retrieved by add "earlyprintk" option to the kernel command line. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty/serial/clps711x.c')
-rw-r--r--drivers/tty/serial/clps711x.c211
1 files changed, 89 insertions, 122 deletions
diff --git a/drivers/tty/serial/clps711x.c b/drivers/tty/serial/clps711x.c
index 07fef1cbc115..de6aa33c305e 100644
--- a/drivers/tty/serial/clps711x.c
+++ b/drivers/tty/serial/clps711x.c
@@ -43,28 +43,29 @@
#include <asm/irq.h>
#define UART_CLPS711X_NAME "uart-clps711x"
+#define UART_CLPS711X_NR 2
+#define UART_CLPS711X_MAJOR 204
+#define UART_CLPS711X_MINOR 40
-#define UART_NR 2
-
-#define SERIAL_CLPS711X_MAJOR 204
-#define SERIAL_CLPS711X_MINOR 40
-#define SERIAL_CLPS711X_NR UART_NR
-
-/*
- * We use the relevant SYSCON register as a base address for these ports.
- */
-#define UBRLCR(port) ((port)->iobase + UBRLCR1 - SYSCON1)
-#define UARTDR(port) ((port)->iobase + UARTDR1 - SYSCON1)
-#define SYSFLG(port) ((port)->iobase + SYSFLG1 - SYSCON1)
-#define SYSCON(port) ((port)->iobase + SYSCON1 - SYSCON1)
-
-#define TX_IRQ(port) ((port)->irq)
-#define RX_IRQ(port) ((port)->irq + 1)
+#define UBRLCR(port) ((port)->line ? UBRLCR2 : UBRLCR1)
+#define UARTDR(port) ((port)->line ? UARTDR2 : UARTDR1)
+#define SYSFLG(port) ((port)->line ? SYSFLG2 : SYSFLG1)
+#define SYSCON(port) ((port)->line ? SYSCON2 : SYSCON1)
+#define TX_IRQ(port) ((port)->line ? IRQ_UTXINT2 : IRQ_UTXINT1)
+#define RX_IRQ(port) ((port)->line ? IRQ_URXINT2 : IRQ_URXINT1)
#define UART_ANY_ERR (UARTDR_FRMERR | UARTDR_PARERR | UARTDR_OVERR)
#define tx_enabled(port) ((port)->unused[0])
+struct clps711x_port {
+ struct uart_driver uart;
+ struct uart_port port[UART_CLPS711X_NR];
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ struct console console;
+#endif
+};
+
static void clps711xuart_stop_tx(struct uart_port *port)
{
if (tx_enabled(port)) {
@@ -382,7 +383,7 @@ static int clps711xuart_request_port(struct uart_port *port)
return 0;
}
-static struct uart_ops clps711x_pops = {
+static struct uart_ops uart_clps711x_ops = {
.tx_empty = clps711xuart_tx_empty,
.set_mctrl = clps711xuart_set_mctrl_null,
.get_mctrl = clps711xuart_get_mctrl,
@@ -400,72 +401,39 @@ static struct uart_ops clps711x_pops = {
.request_port = clps711xuart_request_port,
};
-static struct uart_port clps711x_ports[UART_NR] = {
- {
- .iobase = SYSCON1,
- .irq = IRQ_UTXINT1, /* IRQ_URXINT1, IRQ_UMSINT */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 0,
- .flags = UPF_BOOT_AUTOCONF,
- },
- {
- .iobase = SYSCON2,
- .irq = IRQ_UTXINT2, /* IRQ_URXINT2 */
- .uartclk = 3686400,
- .fifosize = 16,
- .ops = &clps711x_pops,
- .line = 1,
- .flags = UPF_BOOT_AUTOCONF,
- }
-};
-
#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
-static void clps711xuart_console_putchar(struct uart_port *port, int ch)
+static void uart_clps711x_console_putchar(struct uart_port *port, int ch)
{
while (clps_readl(SYSFLG(port)) & SYSFLG_UTXFF)
barrier();
- clps_writel(ch, UARTDR(port));
+
+ clps_writew(ch, UARTDR(port));
}
-/*
- * Print a string to the serial port trying not to disturb
- * any possible real use of the port...
- *
- * The console_lock must be held when we get here.
- *
- * Note that this is called with interrupts already disabled
- */
-static void
-clps711xuart_console_write(struct console *co, const char *s,
- unsigned int count)
+static void uart_clps711x_console_write(struct console *co, const char *c,
+ unsigned n)
{
- struct uart_port *port = clps711x_ports + co->index;
- unsigned int status, syscon;
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[co->index];
+ u32 syscon;
- /*
- * Ensure that the port is enabled.
- */
+ /* Ensure that the port is enabled */
syscon = clps_readl(SYSCON(port));
clps_writel(syscon | SYSCON_UARTEN, SYSCON(port));
- uart_console_write(port, s, count, clps711xuart_console_putchar);
+ uart_console_write(port, c, n, uart_clps711x_console_putchar);
- /*
- * Finally, wait for transmitter to become empty
- * and restore the uart state.
- */
- do {
- status = clps_readl(SYSFLG(port));
- } while (status & SYSFLG_UBUSY);
+ /* Wait for transmitter to become empty */
+ while (clps_readl(SYSFLG(port)) & SYSFLG_UBUSY)
+ barrier();
+ /* Restore the uart state */
clps_writel(syscon, SYSCON(port));
}
-static void __init
-clps711xuart_console_get_options(struct uart_port *port, int *baud,
- int *parity, int *bits)
+static void uart_clps711x_console_get_options(struct uart_port *port,
+ int *baud, int *parity,
+ int *bits)
{
if (clps_readl(SYSCON(port)) & SYSCON_UARTEN) {
unsigned int ubrlcr, quot;
@@ -490,86 +458,85 @@ clps711xuart_console_get_options(struct uart_port *port, int *baud,
}
}
-static int __init clps711xuart_console_setup(struct console *co, char *options)
+static int uart_clps711x_console_setup(struct console *co, char *options)
{
- struct uart_port *port;
- int baud = 38400;
- int bits = 8;
- int parity = 'n';
- int flow = 'n';
-
- /*
- * Check whether an invalid uart number has been specified, and
- * if so, search for the first available port that does have
- * console support.
- */
- port = uart_get_console(clps711x_ports, UART_NR, co);
+ int baud = 38400, bits = 8, parity = 'n', flow = 'n';
+ struct clps711x_port *s = (struct clps711x_port *)co->data;
+ struct uart_port *port = &s->port[(co->index > 0) ? co->index : 0];
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- clps711xuart_console_get_options(port, &baud, &parity, &bits);
+ uart_clps711x_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
-
-static struct uart_driver clps711x_reg;
-static struct console clps711x_console = {
- .name = "ttyCL",
- .write = clps711xuart_console_write,
- .device = uart_console_device,
- .setup = clps711xuart_console_setup,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .data = &clps711x_reg,
-};
-
-static int __init clps711xuart_console_init(void)
-{
- register_console(&clps711x_console);
- return 0;
-}
-console_initcall(clps711xuart_console_init);
-
-#define CLPS711X_CONSOLE &clps711x_console
-#else
-#define CLPS711X_CONSOLE NULL
#endif
-static struct uart_driver clps711x_reg = {
- .driver_name = "ttyCL",
- .dev_name = "ttyCL",
- .major = SERIAL_CLPS711X_MAJOR,
- .minor = SERIAL_CLPS711X_MINOR,
- .nr = UART_NR,
-
- .cons = CLPS711X_CONSOLE,
-};
-
static int __devinit uart_clps711x_probe(struct platform_device *pdev)
{
+ struct clps711x_port *s;
int ret, i;
- printk(KERN_INFO "Serial: CLPS711x driver\n");
+ s = devm_kzalloc(&pdev->dev, sizeof(struct clps711x_port), GFP_KERNEL);
+ if (!s) {
+ dev_err(&pdev->dev, "Error allocating port structure\n");
+ return -ENOMEM;
+ }
+ platform_set_drvdata(pdev, s);
- ret = uart_register_driver(&clps711x_reg);
- if (ret)
- return ret;
+ s->uart.owner = THIS_MODULE;
+ s->uart.dev_name = "ttyCL";
+ s->uart.major = UART_CLPS711X_MAJOR;
+ s->uart.minor = UART_CLPS711X_MINOR;
+ s->uart.nr = UART_CLPS711X_NR;
+#ifdef CONFIG_SERIAL_CLPS711X_CONSOLE
+ s->uart.cons = &s->console;
+ s->uart.cons->device = uart_console_device;
+ s->uart.cons->write = uart_clps711x_console_write;
+ s->uart.cons->setup = uart_clps711x_console_setup;
+ s->uart.cons->flags = CON_PRINTBUFFER;
+ s->uart.cons->index = -1;
+ s->uart.cons->data = s;
+ strcpy(s->uart.cons->name, "ttyCL");
+#endif
+ ret = uart_register_driver(&s->uart);
+ if (ret) {
+ dev_err(&pdev->dev, "Registering UART driver failed\n");
+ goto err_out;
+ }
- for (i = 0; i < UART_NR; i++)
- uart_add_one_port(&clps711x_reg, &clps711x_ports[i]);
+ for (i = 0; i < UART_CLPS711X_NR; i++) {
+ s->port[i].line = i;
+ s->port[i].dev = &pdev->dev;
+ s->port[i].irq = TX_IRQ(&s->port[i]);
+ s->port[i].iobase = SYSCON(&s->port[i]);
+ s->port[i].type = PORT_CLPS711X;
+ s->port[i].fifosize = 16;
+ s->port[i].flags = UPF_SKIP_TEST | UPF_FIXED_TYPE;
+ s->port[i].uartclk = 3686400;
+ s->port[i].ops = &uart_clps711x_ops;
+ WARN_ON(uart_add_one_port(&s->uart, &s->port[i]));
+ }
return 0;
+
+err_out:
+ platform_set_drvdata(pdev, NULL);
+
+ return ret;
}
static int __devexit uart_clps711x_remove(struct platform_device *pdev)
{
+ struct clps711x_port *s = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < UART_NR; i++)
- uart_remove_one_port(&clps711x_reg, &clps711x_ports[i]);
+ for (i = 0; i < UART_CLPS711X_NR; i++)
+ uart_remove_one_port(&s->uart, &s->port[i]);
- uart_unregister_driver(&clps711x_reg);
+ uart_unregister_driver(&s->uart);
+ platform_set_drvdata(pdev, NULL);
return 0;
}