Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty / serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver changes for 6.0-rc1.

  It was delayed from last week as I wanted to make sure the last commit
  here got some good testing in linux-next and elsewhere as it seemed to
  show up only late in testing for some reason.

  Nothing major here, just lots of cleanups from Jiri and Ilpo to make
  the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo).

  Also included in here is the obligatory n_gsm updates from Daniel
  Starke and lots of tiny driver updates and minor fixes and tweaks for
  other smaller serial drivers.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements
  tty: amiserial: Fix comment typo
  tty: serial: document uart_get_console()
  tty: serial: serial_core, reformat kernel-doc for functions
  Documentation: serial: link uart_ops properly
  Documentation: serial: move GPIO kernel-doc to the functions
  Documentation: serial: dedup kernel-doc for uart functions
  Documentation: serial: move uart_ops documentation to the struct
  dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126
  serial: mvebu-uart: uart2 error bits clearing
  tty: serial: fsl_lpuart: correct the count of break characters
  serial: stm32: make info structs static to avoid sparse warnings
  serial: fsl_lpuart: zero out parity bit in CS7 mode
  tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate.
  serial: 8250_bcm2835aux: Add missing clk_disable_unprepare()
  tty: vt: initialize unicode screen buffer
  serial: remove VR41XX serial driver
  serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags
  serial: 8250_dwlib: remove redundant sanity check for RS485 flags
  dt_bindings: rs485: Correct delay values
  ...

1 files changed, 33 insertions, 57 deletions

diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
index 1afe47b62ad5..b7a4b47ce74e 100644
--- a/drivers/tty/serial/samsung_tty.c
+++ b/drivers/tty/serial/samsung_tty.c
@@ -48,6 +48,12 @@
 #define S3C24XX_SERIAL_MAJOR	204
 #define S3C24XX_SERIAL_MINOR	64
 
+#ifdef CONFIG_ARM64
+#define UART_NR			12
+#else
+#define UART_NR			CONFIG_SERIAL_SAMSUNG_UARTS
+#endif
+
 #define S3C24XX_TX_PIO			1
 #define S3C24XX_TX_DMA			2
 #define S3C24XX_RX_PIO			1
@@ -87,7 +93,7 @@ struct s3c24xx_uart_info {
 struct s3c24xx_serial_drv_data {
 	const struct s3c24xx_uart_info	info;
 	const struct s3c2410_uartcfg	def_cfg;
-	const unsigned int		fifosize[CONFIG_SERIAL_SAMSUNG_UARTS];
+	const unsigned int		fifosize[UART_NR];
 };
 
 struct s3c24xx_uart_dma {
@@ -1011,6 +1017,7 @@ static unsigned int s3c24xx_serial_get_mctrl(struct uart_port *port)
 static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {
 	unsigned int umcon = rd_regl(port, S3C2410_UMCON);
+	unsigned int ucon = rd_regl(port, S3C2410_UCON);
 
 	if (mctrl & TIOCM_RTS)
 		umcon |= S3C2410_UMCOM_RTS_LOW;
@@ -1018,6 +1025,13 @@ static void s3c24xx_serial_set_mctrl(struct uart_port *port, unsigned int mctrl)
 		umcon &= ~S3C2410_UMCOM_RTS_LOW;
 
 	wr_regl(port, S3C2410_UMCON, umcon);
+
+	if (mctrl & TIOCM_LOOP)
+		ucon |= S3C2410_UCON_LOOPBACK;
+	else
+		ucon &= ~S3C2410_UCON_LOOPBACK;
+
+	wr_regl(port, S3C2410_UCON, ucon);
 }
 
 static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
@@ -1801,67 +1815,27 @@ static const struct uart_ops apple_s5l_serial_ops = {
 static struct uart_driver s3c24xx_uart_drv = {
 	.owner		= THIS_MODULE,
 	.driver_name	= "s3c2410_serial",
-	.nr		= CONFIG_SERIAL_SAMSUNG_UARTS,
+	.nr		= UART_NR,
 	.cons		= S3C24XX_SERIAL_CONSOLE,
 	.dev_name	= S3C24XX_SERIAL_NAME,
 	.major		= S3C24XX_SERIAL_MAJOR,
 	.minor		= S3C24XX_SERIAL_MINOR,
 };
 
-#define __PORT_LOCK_UNLOCKED(i) \
-	__SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[i].port.lock)
-static struct s3c24xx_uart_port
-s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = {
-	[0] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(0),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 0,
-		}
-	},
-	[1] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(1),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 1,
-		}
-	},
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 2
-	[2] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(2),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 2,
-		}
-	},
-#endif
-#if CONFIG_SERIAL_SAMSUNG_UARTS > 3
-	[3] = {
-		.port = {
-			.lock		= __PORT_LOCK_UNLOCKED(3),
-			.iotype		= UPIO_MEM,
-			.uartclk	= 0,
-			.fifosize	= 16,
-			.ops		= &s3c24xx_serial_ops,
-			.flags		= UPF_BOOT_AUTOCONF,
-			.line		= 3,
-		}
-	}
-#endif
-};
-#undef __PORT_LOCK_UNLOCKED
+static struct s3c24xx_uart_port s3c24xx_serial_ports[UART_NR];
+
+static void s3c24xx_serial_init_port_default(int index) {
+	struct uart_port *port = &s3c24xx_serial_ports[index].port;
+
+	spin_lock_init(&port->lock);
+
+	port->iotype = UPIO_MEM;
+	port->uartclk = 0;
+	port->fifosize = 16;
+	port->ops = &s3c24xx_serial_ops;
+	port->flags = UPF_BOOT_AUTOCONF;
+	port->line = index;
+}
 
 /* s3c24xx_serial_resetport
  *
@@ -2177,6 +2151,8 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
 	}
 	ourport = &s3c24xx_serial_ports[index];
 
+	s3c24xx_serial_init_port_default(index);
+
 	ourport->drv_data = s3c24xx_get_driver_data(pdev);
 	if (!ourport->drv_data) {
 		dev_err(&pdev->dev, "could not find driver data\n");
@@ -2575,7 +2551,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options)
 
 	/* is this a valid port */
 
-	if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS)
+	if (co->index == -1 || co->index >= UART_NR)
 		co->index = 0;
 
 	port = &s3c24xx_serial_ports[co->index].port;