serial: sirf: workaround rx process to avoid possible data loss

when UART works in DMA mode and left bytes in rx fifo less than
a dma transfer unit, DMA engine can't transfer the bytes out
to rx DMA buffer. so it need a way to fetch them out and
flush them into tty buffer in time.

in the above case, we want UART switch from DMA mode to PIO mode and
fetch && flush bytes into tty layer buffer until rxfifo become empty,
after that done let UART switch from PIO mode back to DMA mode.
(record as method1)

method1 result in the next receive result wrong. for example in PIO part
of method1, we fetched && pushed X1...X3 bytes, when UART rxfifo newly
received Y1...Y4 bytes, UART trigger a DMA unit transfer, the DMA unit's
content is X1...X3Y1 and rxfifo fifo status is empty, so X1X2X3 pushed
twice by PIO way and DMA way also the bytes Y2Y3Y4 missed. add rxfifo
reset operation before UART switch back to DMA mode would resolve the
issue. ([method1 + do fifo reset] record as method2)

before the commit, UART driver use method2. but methd2 have a risk of
data loss, as if UART's shift register receive a complete byte and
transfer it into rxfifo before rxfifo reset operation the byte will
loss.

UART and USP have the similar bits CLEAR_RX_ADDR_EN(uart)/FRADDR_CLR_EN(usp),
When found UART controller changing I/O to DMA mode, UART controller
clears the two low bits of read point (rx_fifo_addr[1:0]).
when enable the bit + method1(record as method3), in above example
the DMA unit's content is X1...X3Y1 and there are Y2Y3Y4 in rxfifo by
experiment, we just push bytes in rx DMA buffer.

BTW, the workaround works only for UART receive DMA channel use SINGLE
DMA mode.

Signed-off-by: Qipan Li <Qipan.Li@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 62 insertions, 18 deletions

diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
index 653cdd5fb508..8cac7ac497e8 100644
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ b/drivers/tty/serial/sirfsoc_uart.c
@@ -886,9 +886,13 @@ static void sirfsoc_uart_set_termios(struct uart_port *port,
 	else
 		wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
 	if (sirfport->rx_dma_chan)
-		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_DMA_MODE);
+		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
+			~SIRFUART_IO_MODE);
 	else
-		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl, SIRFUART_IO_MODE);
+		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+			SIRFUART_IO_MODE);
 	sirfport->rx_period_time = 20000000;
 	/* Reset Rx/Tx FIFO Threshold level for proper baudrate */
 	if (set_baud < 1000000)
@@ -958,9 +962,9 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 	wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
 	if (sirfport->rx_dma_chan)
 		wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
-			SIRFUART_RX_FIFO_CHK_SC(port->line, 0x4) |
-			SIRFUART_RX_FIFO_CHK_LC(port->line, 0xe) |
-			SIRFUART_RX_FIFO_CHK_HC(port->line, 0x1b));
+			SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) |
+			SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) |
+			SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4));
 	if (sirfport->tx_dma_chan) {
 		sirfport->tx_dma_state = TX_DMA_IDLE;
 		wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
@@ -981,10 +985,21 @@ static int sirfsoc_uart_startup(struct uart_port *port)
 			goto init_rx_err;
 		}
 	}
+	if (sirfport->uart_reg->uart_type == SIRF_REAL_UART &&
+		sirfport->rx_dma_chan)
+		wr_regl(port, ureg->sirfsoc_swh_dma_io,
+			SIRFUART_CLEAR_RX_ADDR_EN);
+	if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
+			sirfport->rx_dma_chan)
+		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
+			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
+			SIRFSOC_USP_FRADDR_CLR_EN);
 	enable_irq(port->irq);
 	if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) {
 		sirfport->is_hrt_enabled = true;
 		sirfport->rx_period_time = 20000000;
+		sirfport->rx_last_pos = -1;
+		sirfport->pio_fetch_cnt = 0;
 		sirfport->rx_dma_items.xmit.tail =
 			sirfport->rx_dma_items.xmit.head = 0;
 		hrtimer_start(&sirfport->hrt,
@@ -1003,6 +1018,9 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
 {
 	struct sirfsoc_uart_port *sirfport = to_sirfport(port);
 	struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
+	struct circ_buf *xmit;
+
+	xmit = &sirfport->rx_dma_items.xmit;
 	if (!sirfport->is_atlas7)
 		wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
 	else
@@ -1019,8 +1037,10 @@ static void sirfsoc_uart_shutdown(struct uart_port *port)
 	if (sirfport->tx_dma_chan)
 		sirfport->tx_dma_state = TX_DMA_IDLE;
 	if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) {
-		while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
-			SIRFUART_RX_FIFO_MASK) > 0)
+		while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+			SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) &&
+			!CIRC_CNT(xmit->head, xmit->tail,
+			SIRFSOC_RX_DMA_BUF_SIZE))
 			;
 		sirfport->is_hrt_enabled = false;
 		hrtimer_cancel(&sirfport->hrt);
@@ -1169,6 +1189,8 @@ static enum hrtimer_restart
 	struct tty_struct *tty;
 	struct sirfsoc_register *ureg;
 	struct circ_buf *xmit;
+	struct sirfsoc_fifo_status *ufifo_st;
+	int max_pio_cnt;
 
 	sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt);
 	port = &sirfport->port;
@@ -1176,9 +1198,16 @@ static enum hrtimer_restart
 	tty = port->state->port.tty;
 	ureg = &sirfport->uart_reg->uart_reg;
 	xmit = &sirfport->rx_dma_items.xmit;
+	ufifo_st = &sirfport->uart_reg->fifo_status;
+
 	dmaengine_tx_status(sirfport->rx_dma_chan,
-		sirfport->rx_dma_items.cookie, &tx_state);
-	xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
+			sirfport->rx_dma_items.cookie, &tx_state);
+	if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue !=
+		sirfport->rx_last_pos) {
+		xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
+		sirfport->rx_last_pos = xmit->head;
+		sirfport->pio_fetch_cnt = 0;
+	}
 	count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
 			SIRFSOC_RX_DMA_BUF_SIZE);
 	while (count > 0) {
@@ -1200,23 +1229,38 @@ static enum hrtimer_restart
 	 */
 	if (!inserted && !count &&
 		((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
-		SIRFUART_RX_FIFO_MASK) > 0)) {
+		SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) {
+		dmaengine_pause(sirfport->rx_dma_chan);
 		/* switch to pio mode */
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
 			SIRFUART_IO_MODE);
-		while ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
-			SIRFUART_RX_FIFO_MASK) > 0) {
-			if (sirfsoc_uart_pio_rx_chars(port, 16) > 0)
-				tty_flip_buffer_push(tty->port);
+		/*
+		 * UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN
+		 * When found changing I/O to DMA mode, it clears
+		 * two low bits of read point;
+		 * USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL.
+		 * Fetch data out from rxfifo into DMA buffer in PIO mode,
+		 * while switch back to DMA mode, the data fetched will override
+		 * by DMA, as hardware have a strange behaviour:
+		 * after switch back to DMA mode, check rxfifo status it will
+		 * be the number PIO fetched, so record the fetched data count
+		 * to avoid the repeated fetch
+		 */
+		max_pio_cnt = 3;
+		while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
+			ufifo_st->ff_empty(port)) && max_pio_cnt--) {
+			xmit->buf[xmit->head] =
+				rd_regl(port, ureg->sirfsoc_rx_fifo_data);
+			xmit->head = (xmit->head + 1) &
+					(SIRFSOC_RX_DMA_BUF_SIZE - 1);
+			sirfport->pio_fetch_cnt++;
 		}
-		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
-		wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
-		wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
 		/* switch back to dma mode */
 		wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
 			rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
 			~SIRFUART_IO_MODE);
+		dmaengine_resume(sirfport->rx_dma_chan);
 	}
 next_hrt:
 	hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time));
@@ -1239,7 +1283,7 @@ static int sirfsoc_uart_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 	struct dma_slave_config slv_cfg = {
-		.src_maxburst = 2,
+		.src_maxburst = 1,
 	};
 	struct dma_slave_config tx_slv_cfg = {
 		.dst_maxburst = 2,