Merge tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt subsystem updates from Thomas Gleixner:
 "Tree wide:

   - Make nr_irqs static to the core code and provide accessor functions
     to remove existing and prevent future aliasing problems with local
     variables or function arguments of the same name.

  Core code:

   - Prevent freeing an interrupt in the devres code which is not
     managed by devres in the first place.

   - Use seq_put_decimal_ull_width() for decimal values output in
     /proc/interrupts which increases performance significantly as it
     avoids parsing the format strings over and over.

   - Optimize raising the timer and hrtimer soft interrupts by using the
     'set bit only' variants instead of the combined version which
     checks whether ksoftirqd should be woken up. The latter is a
     pointless exercise as both soft interrupts are raised in the
     context of the timer interrupt and therefore never wake up
     ksoftirqd.

   - Delegate timer/hrtimer soft interrupt processing to a dedicated
     thread on RT.

     Timer and hrtimer soft interrupts are always processed in ksoftirqd
     on RT enabled kernels. This can lead to high latencies when other
     soft interrupts are delegated to ksoftirqd as well.

     The separate thread allows to run them seperately under a RT
     scheduling policy to reduce the latency overhead.

  Drivers:

   - New drivers or extensions of existing drivers to support Renesas
     RZ/V2H(P), Aspeed AST27XX, T-HEAD C900 and ATMEL sam9x7 interrupt
     chips

   - Support for multi-cluster GICs on MIPS.

     MIPS CPUs can come with multiple CPU clusters, where each CPU
     cluster has its own GIC (Generic Interrupt Controller). This
     requires to access the GIC of a remote cluster through a redirect
     register block.

     This is encapsulated into a set of helper functions to keep the
     complexity out of the actual code paths which handle the GIC
     details.

   - Support for encrypted guests in the ARM GICV3 ITS driver

     The ITS page needs to be shared with the hypervisor and therefore
     must be decrypted.

   - Small cleanups and fixes all over the place"

* tag 'irq-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
  irqchip/riscv-aplic: Prevent crash when MSI domain is missing
  genirq/proc: Use seq_put_decimal_ull_width() for decimal values
  softirq: Use a dedicated thread for timer wakeups on PREEMPT_RT.
  timers: Use __raise_softirq_irqoff() to raise the softirq.
  hrtimer: Use __raise_softirq_irqoff() to raise the softirq
  riscv: defconfig: Enable T-HEAD C900 ACLINT SSWI drivers
  irqchip: Add T-HEAD C900 ACLINT SSWI driver
  dt-bindings: interrupt-controller: Add T-HEAD C900 ACLINT SSWI device
  irqchip/stm32mp-exti: Use of_property_present() for non-boolean properties
  irqchip/mips-gic: Fix selection of GENERIC_IRQ_EFFECTIVE_AFF_MASK
  irqchip/mips-gic: Prevent indirect access to clusters without CPU cores
  irqchip/mips-gic: Multi-cluster support
  irqchip/mips-gic: Setup defaults in each cluster
  irqchip/mips-gic: Support multi-cluster in for_each_online_cpu_gic()
  irqchip/mips-gic: Replace open coded online CPU iterations
  genirq/irqdesc: Use str_enabled_disabled() helper in wakeup_show()
  genirq/devres: Don't free interrupt which is not managed by devres
  irqchip/gic-v3-its: Fix over allocation in itt_alloc_pool()
  irqchip/aspeed-intc: Add AST27XX INTC support
  dt-bindings: interrupt-controller: Add support for ASPEED AST27XX INTC
  ...

6 files changed, 6 insertions, 6 deletions

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 3509af7dc52b..0b886c0924da 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3176,7 +3176,7 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 static int
 serial8250_verify_port(struct uart_port *port, struct serial_struct *ser)
 {
-	if (ser->irq >= nr_irqs || ser->irq < 0 ||
+	if (ser->irq >= irq_get_nr_irqs() || ser->irq < 0 ||
 	    ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
 	    ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS ||
 	    ser->type == PORT_STARTECH)
diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c
index eabbf8afc9b5..c3a7fad02ac9 100644
--- a/drivers/tty/serial/amba-pl010.c
+++ b/drivers/tty/serial/amba-pl010.c
@@ -499,7 +499,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
 	int ret = 0;
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
+	if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs())
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 7d0134ecd82f..1c60850030b1 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2202,7 +2202,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
 
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
+	if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs())
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c
index a927478f581d..6eb8625de435 100644
--- a/drivers/tty/serial/cpm_uart.c
+++ b/drivers/tty/serial/cpm_uart.c
@@ -631,7 +631,7 @@ static int cpm_uart_verify_port(struct uart_port *port,
 
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
 		ret = -EINVAL;
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
+	if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs())
 		ret = -EINVAL;
 	if (ser->baud_base < 9600)
 		ret = -EINVAL;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index d94d73e45fb6..74fa02b23772 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -919,7 +919,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port,
 	if (uport->ops->verify_port)
 		retval = uport->ops->verify_port(uport, new_info);
 
-	if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) ||
+	if ((new_info->irq >= irq_get_nr_irqs()) || (new_info->irq < 0) ||
 	    (new_info->baud_base < 9600))
 		retval = -EINVAL;
 
diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c
index 53bb8c5ef499..4eed909468ff 100644
--- a/drivers/tty/serial/ucc_uart.c
+++ b/drivers/tty/serial/ucc_uart.c
@@ -1045,7 +1045,7 @@ static int qe_uart_verify_port(struct uart_port *port,
 	if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM)
 		return -EINVAL;
 
-	if (ser->irq < 0 || ser->irq >= nr_irqs)
+	if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs())
 		return -EINVAL;
 
 	if (ser->baud_base < 9600)