Merge 5.18-rc5 into usb-next

We need the USB fixes in here, and this resolves a merge issue in
drivers/usb/dwc3/drd.c

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 29 insertions, 5 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 364c64559ca4..2345a54b848b 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -275,7 +275,8 @@ int dwc3_core_soft_reset(struct dwc3 *dwc)
 
 	reg = dwc3_readl(dwc->regs, DWC3_DCTL);
 	reg |= DWC3_DCTL_CSFTRST;
-	dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+	reg &= ~DWC3_DCTL_RUN_STOP;
+	dwc3_gadget_dctl_write_safe(dwc, reg);
 
 	/*
 	 * For DWC_usb31 controller 1.90a and later, the DCTL.CSFRST bit
@@ -1377,10 +1378,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
 	u8			lpm_nyet_threshold;
 	u8			tx_de_emphasis;
 	u8			hird_threshold;
-	u8			rx_thr_num_pkt_prd;
-	u8			rx_max_burst_prd;
-	u8			tx_thr_num_pkt_prd;
-	u8			tx_max_burst_prd;
+	u8			rx_thr_num_pkt_prd = 0;
+	u8			rx_max_burst_prd = 0;
+	u8			tx_thr_num_pkt_prd = 0;
+	u8			tx_max_burst_prd = 0;
 	u8			tx_fifo_resize_max_num;
 	const char		*usb_psy_name;
 	int			ret;
@@ -1735,21 +1736,44 @@ static int dwc3_probe(struct platform_device *pdev)
 		/*
 		 * Clocks are optional, but new DT platforms should support all
 		 * clocks as required by the DT-binding.
+		 * Some devices have different clock names in legacy device trees,
+		 * check for them to retain backwards compatibility.
 		 */
 		dwc->bus_clk = devm_clk_get_optional(dev, "bus_early");
 		if (IS_ERR(dwc->bus_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
 					     "could not get bus clock\n");
 
+		if (dwc->bus_clk == NULL) {
+			dwc->bus_clk = devm_clk_get_optional(dev, "bus_clk");
+			if (IS_ERR(dwc->bus_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->bus_clk),
+						     "could not get bus clock\n");
+		}
+
 		dwc->ref_clk = devm_clk_get_optional(dev, "ref");
 		if (IS_ERR(dwc->ref_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
 					     "could not get ref clock\n");
 
+		if (dwc->ref_clk == NULL) {
+			dwc->ref_clk = devm_clk_get_optional(dev, "ref_clk");
+			if (IS_ERR(dwc->ref_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->ref_clk),
+						     "could not get ref clock\n");
+		}
+
 		dwc->susp_clk = devm_clk_get_optional(dev, "suspend");
 		if (IS_ERR(dwc->susp_clk))
 			return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
 					     "could not get suspend clock\n");
+
+		if (dwc->susp_clk == NULL) {
+			dwc->susp_clk = devm_clk_get_optional(dev, "suspend_clk");
+			if (IS_ERR(dwc->susp_clk))
+				return dev_err_probe(dev, PTR_ERR(dwc->susp_clk),
+						     "could not get suspend clock\n");
+		}
 	}
 
 	ret = reset_control_deassert(dwc->reset);