Merge tag 'usb-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next

Felipe writes:

usb: changes for v3.14 merge window

This pull request is quite extensive, containing
105 non-merge commits. Because of that, we describe
the changes in sections below:

New drivers:
	- Keystone PHY driver and DWC3 Glue Layer
	- Aeroflex Gaisler GRUSBDC
	- Tahvo PHY driver for N770
	- JZ4740 MUSB gluer Layer
	- Broadcom PHY Driver

Important new features:
	- MUSB DSPS learned about suspend/resume
	- New quirk_ep_out_aligned_size flag added to struct usb_gadget
	- DWC3 initializes the new quirk flag so gadget drivers can use it.
	- AM335x PHY Driver learns about remote wakeup
	- Renesas USBHS now requests DMA Engine only once
	- s3c-hsotg is now re-used on Broadcom devices
	- USB PHY layer now makes sure to initialize the notifier for all
		drivers
	- omap-control learned about TI's new AM437x devices
	- few other usb gadget/function drivers learned about the new
		configfs-based binding.

Misc Fixes and Clean Ups:
	- Several sparse fixes all over the place
	- Removal of redundant of_match_ptr()
	- r-car gen2 phy now uses usb_add_phy_dev()
	- removal of DEFINE_PCI_DEVICE_TABLE() from a few drivers
	- conversion to clk_prepare/clk_unprepare on r8a66597-udc
	- some randconfig errors and build warnings were fixed
	- removal of unnecessary lock on dwc3-omap.c

Signed-of-by: Felipe Balbi <balbi@ti.com>

1 files changed, 59 insertions, 22 deletions

diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index e20bc109fdd7..c0ff1cb91f20 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -30,14 +30,14 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of_platform.h>
+#include <linux/phy/phy.h>
+#include <linux/usb/phy.h>
 
 #include <linux/usb/ch9.h>
 #include <linux/usb/gadget.h>
 #include <linux/usb/phy.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
-#include <mach/map.h>
-
 #include "s3c-hsotg.h"
 
 static const char * const s3c_hsotg_supply_names[] = {
@@ -140,11 +140,13 @@ struct s3c_hsotg_ep {
  * @dev: The parent device supplied to the probe function
  * @driver: USB gadget driver
  * @phy: The otg phy transceiver structure for phy control.
+ * @uphy: The otg phy transceiver structure for old USB phy control.
  * @plat: The platform specific configuration data. This can be removed once
  * all SoCs support usb transceiver.
  * @regs: The memory area mapped for accessing registers.
  * @irq: The IRQ number we are using
  * @supplies: Definition of USB power supplies
+ * @phyif: PHY interface width
  * @dedicated_fifos: Set if the hardware has dedicated IN-EP fifos.
  * @num_of_eps: Number of available EPs (excluding EP0)
  * @debug_root: root directrory for debugfs.
@@ -161,7 +163,8 @@ struct s3c_hsotg_ep {
 struct s3c_hsotg {
 	struct device		 *dev;
 	struct usb_gadget_driver *driver;
-	struct usb_phy		*phy;
+	struct phy		 *phy;
+	struct usb_phy		 *uphy;
 	struct s3c_hsotg_plat	 *plat;
 
 	spinlock_t              lock;
@@ -172,6 +175,7 @@ struct s3c_hsotg {
 
 	struct regulator_bulk_data supplies[ARRAY_SIZE(s3c_hsotg_supply_names)];
 
+	u32			phyif;
 	unsigned int		dedicated_fifos:1;
 	unsigned char           num_of_eps;
 
@@ -2086,13 +2090,13 @@ static void s3c_hsotg_irq_enumdone(struct s3c_hsotg *hsotg)
 	case DSTS_EnumSpd_FS48:
 		hsotg->gadget.speed = USB_SPEED_FULL;
 		ep0_mps = EP0_MPS_LIMIT;
-		ep_mps = 64;
+		ep_mps = 1023;
 		break;
 
 	case DSTS_EnumSpd_HS:
 		hsotg->gadget.speed = USB_SPEED_HIGH;
 		ep0_mps = EP0_MPS_LIMIT;
-		ep_mps = 512;
+		ep_mps = 1024;
 		break;
 
 	case DSTS_EnumSpd_LS:
@@ -2156,6 +2160,9 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
 		s3c_hsotg_complete_request(hsotg, ep, req,
 					   result);
 	}
+	if(hsotg->dedicated_fifos)
+		if ((readl(hsotg->regs + DTXFSTS(ep->index)) & 0xffff) * 4 < 3072)
+			s3c_hsotg_txfifo_flush(hsotg, ep->index);
 }
 
 #define call_gadget(_hs, _entry) \
@@ -2283,7 +2290,7 @@ static void s3c_hsotg_core_init(struct s3c_hsotg *hsotg)
 	 */
 
 	/* set the PLL on, remove the HNP/SRP and set the PHY */
-	writel(GUSBCFG_PHYIf16 | GUSBCFG_TOutCal(7) |
+	writel(hsotg->phyif | GUSBCFG_TOutCal(7) |
 	       (0x5 << 10), hsotg->regs + GUSBCFG);
 
 	s3c_hsotg_init_fifo(hsotg);
@@ -2908,8 +2915,11 @@ static void s3c_hsotg_phy_enable(struct s3c_hsotg *hsotg)
 
 	dev_dbg(hsotg->dev, "pdev 0x%p\n", pdev);
 
-	if (hsotg->phy)
-		usb_phy_init(hsotg->phy);
+	if (hsotg->phy) {
+		phy_init(hsotg->phy);
+		phy_power_on(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_init(hsotg->uphy);
 	else if (hsotg->plat->phy_init)
 		hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
 }
@@ -2925,8 +2935,11 @@ static void s3c_hsotg_phy_disable(struct s3c_hsotg *hsotg)
 {
 	struct platform_device *pdev = to_platform_device(hsotg->dev);
 
-	if (hsotg->phy)
-		usb_phy_shutdown(hsotg->phy);
+	if (hsotg->phy) {
+		phy_power_off(hsotg->phy);
+		phy_exit(hsotg->phy);
+	} else if (hsotg->uphy)
+		usb_phy_shutdown(hsotg->uphy);
 	else if (hsotg->plat->phy_exit)
 		hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
 }
@@ -3152,7 +3165,7 @@ static void s3c_hsotg_initep(struct s3c_hsotg *hsotg,
 
 	hs_ep->parent = hsotg;
 	hs_ep->ep.name = hs_ep->name;
-	hs_ep->ep.maxpacket = epnum ? 1024 : EP0_MPS_LIMIT;
+	usb_ep_set_maxpacket_limit(&hs_ep->ep, epnum ? 1024 : EP0_MPS_LIMIT);
 	hs_ep->ep.ops = &s3c_hsotg_ep_ops;
 
 	/*
@@ -3533,7 +3546,8 @@ static void s3c_hsotg_delete_debug(struct s3c_hsotg *hsotg)
 static int s3c_hsotg_probe(struct platform_device *pdev)
 {
 	struct s3c_hsotg_plat *plat = dev_get_platdata(&pdev->dev);
-	struct usb_phy *phy;
+	struct phy *phy;
+	struct usb_phy *uphy;
 	struct device *dev = &pdev->dev;
 	struct s3c_hsotg_ep *eps;
 	struct s3c_hsotg *hsotg;
@@ -3548,19 +3562,26 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
-	phy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+	/*
+	 * Attempt to find a generic PHY, then look for an old style
+	 * USB PHY, finally fall back to pdata
+	 */
+	phy = devm_phy_get(&pdev->dev, "usb2-phy");
 	if (IS_ERR(phy)) {
-		/* Fallback for pdata */
-		plat = dev_get_platdata(&pdev->dev);
-		if (!plat) {
-			dev_err(&pdev->dev, "no platform data or transceiver defined\n");
-			return -EPROBE_DEFER;
-		} else {
+		uphy = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2);
+		if (IS_ERR(uphy)) {
+			/* Fallback for pdata */
+			plat = dev_get_platdata(&pdev->dev);
+			if (!plat) {
+				dev_err(&pdev->dev,
+				"no platform data or transceiver defined\n");
+				return -EPROBE_DEFER;
+			}
 			hsotg->plat = plat;
-		}
-	} else {
+		} else
+			hsotg->uphy = uphy;
+	} else
 		hsotg->phy = phy;
-	}
 
 	hsotg->dev = dev;
 
@@ -3627,6 +3648,19 @@ static int s3c_hsotg_probe(struct platform_device *pdev)
 		goto err_supplies;
 	}
 
+	/* Set default UTMI width */
+	hsotg->phyif = GUSBCFG_PHYIf16;
+
+	/*
+	 * If using the generic PHY framework, check if the PHY bus
+	 * width is 8-bit and set the phyif appropriately.
+	 */
+	if (hsotg->phy && (phy_get_bus_width(phy) == 8))
+		hsotg->phyif = GUSBCFG_PHYIf8;
+
+	if (hsotg->phy)
+		phy_init(hsotg->phy);
+
 	/* usb phy enable */
 	s3c_hsotg_phy_enable(hsotg);
 
@@ -3720,6 +3754,8 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 	}
 
 	s3c_hsotg_phy_disable(hsotg);
+	if (hsotg->phy)
+		phy_exit(hsotg->phy);
 	clk_disable_unprepare(hsotg->clk);
 
 	return 0;
@@ -3733,6 +3769,7 @@ static int s3c_hsotg_remove(struct platform_device *pdev)
 #ifdef CONFIG_OF
 static const struct of_device_id s3c_hsotg_of_ids[] = {
 	{ .compatible = "samsung,s3c6400-hsotg", },
+	{ .compatible = "snps,dwc2", },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, s3c_hsotg_of_ids);