usb: gadget: fsl: properly remove remnant of MXC support

Commit a390bef7db1f ("usb: gadget: fsl_mxc_udc: Remove the driver")
didn't remove all the MXC related stuff which can cause build problem
for LS1021 when enabled again in Kconfig.  This patch remove all the
remnants.

Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Link: https://lore.kernel.org/r/20210612003128.372238-1-leoyang.li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 6 insertions, 30 deletions

diff --git a/drivers/usb/gadget/udc/fsl_udc_core.c b/drivers/usb/gadget/udc/fsl_udc_core.c
index 2b357b3f64c0..29fcb9b461d7 100644
--- a/drivers/usb/gadget/udc/fsl_udc_core.c
+++ b/drivers/usb/gadget/udc/fsl_udc_core.c
@@ -36,7 +36,6 @@
 #include <linux/platform_device.h>
 #include <linux/fsl_devices.h>
 #include <linux/dmapool.h>
-#include <linux/delay.h>
 #include <linux/of_device.h>
 
 #include <asm/byteorder.h>
@@ -323,13 +322,11 @@ static int dr_controller_setup(struct fsl_udc *udc)
 		fsl_writel(tmp, &dr_regs->endptctrl[ep_num]);
 	}
 	/* Config control enable i/o output, cpu endian register */
-#ifndef CONFIG_ARCH_MXC
 	if (udc->pdata->have_sysif_regs) {
 		ctrl = __raw_readl(&usb_sys_regs->control);
 		ctrl |= USB_CTRL_IOENB;
 		__raw_writel(ctrl, &usb_sys_regs->control);
 	}
-#endif
 
 #if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
 	/* Turn on cache snooping hardware, since some PowerPC platforms
@@ -2153,7 +2150,6 @@ static int fsl_proc_read(struct seq_file *m, void *v)
 	tmp_reg = fsl_readl(&dr_regs->endpointprime);
 	seq_printf(m, "EP Prime Reg = [0x%x]\n\n", tmp_reg);
 
-#ifndef CONFIG_ARCH_MXC
 	if (udc->pdata->have_sysif_regs) {
 		tmp_reg = usb_sys_regs->snoop1;
 		seq_printf(m, "Snoop1 Reg : = [0x%x]\n\n", tmp_reg);
@@ -2161,7 +2157,6 @@ static int fsl_proc_read(struct seq_file *m, void *v)
 		tmp_reg = usb_sys_regs->control;
 		seq_printf(m, "General Control Reg : = [0x%x]\n\n", tmp_reg);
 	}
-#endif
 
 	/* ------fsl_udc, fsl_ep, fsl_request structure information ----- */
 	ep = &udc->eps[0];
@@ -2412,28 +2407,21 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	 */
 	if (pdata->init && pdata->init(pdev)) {
 		ret = -ENODEV;
-		goto err_iounmap_noclk;
+		goto err_iounmap;
 	}
 
 	/* Set accessors only after pdata->init() ! */
 	fsl_set_accessors(pdata);
 
-#ifndef CONFIG_ARCH_MXC
 	if (pdata->have_sysif_regs)
 		usb_sys_regs = (void *)dr_regs + USB_DR_SYS_OFFSET;
-#endif
-
-	/* Initialize USB clocks */
-	ret = fsl_udc_clk_init(pdev);
-	if (ret < 0)
-		goto err_iounmap_noclk;
 
 	/* Read Device Controller Capability Parameters register */
 	dccparams = fsl_readl(&dr_regs->dccparams);
 	if (!(dccparams & DCCPARAMS_DC)) {
 		ERR("This SOC doesn't support device role\n");
 		ret = -ENODEV;
-		goto err_iounmap;
+		goto err_exit;
 	}
 	/* Get max device endpoints */
 	/* DEN is bidirectional ep number, max_ep doubles the number */
@@ -2442,7 +2430,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	ret = platform_get_irq(pdev, 0);
 	if (ret <= 0) {
 		ret = ret ? : -ENODEV;
-		goto err_iounmap;
+		goto err_exit;
 	}
 	udc_controller->irq = ret;
 
@@ -2451,7 +2439,7 @@ static int fsl_udc_probe(struct platform_device *pdev)
 	if (ret != 0) {
 		ERR("cannot request irq %d err %d\n",
 				udc_controller->irq, ret);
-		goto err_iounmap;
+		goto err_exit;
 	}
 
 	/* Initialize the udc structure including QH member and other member */
@@ -2467,10 +2455,6 @@ static int fsl_udc_probe(struct platform_device *pdev)
 		dr_controller_setup(udc_controller);
 	}
 
-	ret = fsl_udc_clk_finalize(pdev);
-	if (ret)
-		goto err_free_irq;
-
 	/* Setup gadget structure */
 	udc_controller->gadget.ops = &fsl_gadget_ops;
 	udc_controller->gadget.max_speed = USB_SPEED_HIGH;
@@ -2530,11 +2514,10 @@ err_del_udc:
 	dma_pool_destroy(udc_controller->td_pool);
 err_free_irq:
 	free_irq(udc_controller->irq, udc_controller);
-err_iounmap:
+err_exit:
 	if (pdata->exit)
 		pdata->exit(pdev);
-	fsl_udc_clk_release();
-err_iounmap_noclk:
+err_iounmap:
 	iounmap(dr_regs);
 err_release_mem_region:
 	if (pdata->operating_mode == FSL_USB2_DR_DEVICE)
@@ -2561,8 +2544,6 @@ static int fsl_udc_remove(struct platform_device *pdev)
 	udc_controller->done = &done;
 	usb_del_gadget_udc(&udc_controller->gadget);
 
-	fsl_udc_clk_release();
-
 	/* DR has been stopped in usb_gadget_unregister_driver() */
 	remove_proc_file();
 
@@ -2677,10 +2658,6 @@ static int fsl_udc_otg_resume(struct device *dev)
 --------------------------------------------------------------------------*/
 static const struct platform_device_id fsl_udc_devtype[] = {
 	{
-		.name = "imx-udc-mx27",
-	}, {
-		.name = "imx-udc-mx51",
-	}, {
 		.name = "fsl-usb2-udc",
 	}, {
 		/* sentinel */
@@ -2689,7 +2666,6 @@ static const struct platform_device_id fsl_udc_devtype[] = {
 MODULE_DEVICE_TABLE(platform, fsl_udc_devtype);
 static struct platform_driver udc_driver = {
 	.remove		= fsl_udc_remove,
-	/* Just for FSL i.mx SoC currently */
 	.id_table	= fsl_udc_devtype,
 	/* these suspend and resume are not usb suspend and resume */
 	.suspend	= fsl_udc_suspend,