diff options
| author | Alan Stern <stern@rowland.harvard.edu> | 2012-07-09 15:55:14 -0400 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-07-09 13:35:05 -0700 |
| commit | 1a49e2ac9651df7349867a5cf44e2c83de1046af (patch) | |
| tree | b4ba01d645073947dcf8bbe1972b7af740031b5b /drivers/usb/host/ehci-xilinx-of.c | |
| parent | 1530280084c3905be6fce802cbfa83fb3bbb8839 (diff) | |
EHCI: centralize controller initialization
This patch (as1564c) converts the EHCI platform drivers to use the
central ehci_setup() routine for generic controller initialization
rather than each having its own idiosyncratic approach.
The major point of difficulty lies in ehci-pci's many vendor- and
device-specific workarounds. Some of them have to be applied before
calling ehci_setup() and some after, which necessitates a fair amount
of code motion. The other platform drivers require much smaller
changes.
One point not addressed by the patch is whether ports should be
powered on or off following initialization. The different drivers
appear to handle this pretty much at random. In fact it shouldn't
matter, because the hub driver turns on power to all ports when it
binds to the root hub. Straightening that out will be left for
another day.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/usb/host/ehci-xilinx-of.c')
| -rw-r--r-- | drivers/usb/host/ehci-xilinx-of.c | 31 |
1 files changed, 1 insertions, 30 deletions
diff --git a/drivers/usb/host/ehci-xilinx-of.c b/drivers/usb/host/ehci-xilinx-of.c index e9713d589e30..39f24fa37ebe 100644 --- a/drivers/usb/host/ehci-xilinx-of.c +++ b/drivers/usb/host/ehci-xilinx-of.c @@ -32,30 +32,6 @@ #include <linux/of_address.h> /** - * ehci_xilinx_of_setup - Initialize the device for ehci_reset() - * @hcd: Pointer to the usb_hcd device to which the host controller bound - * - * called during probe() after chip reset completes. - */ -static int ehci_xilinx_of_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - retval = ehci_init(hcd); - if (retval) - return retval; - - ehci->sbrn = 0x20; - - return ehci_reset(ehci); -} - -/** * ehci_xilinx_port_handed_over - hand the port out if failed to enable it * @hcd: Pointer to the usb_hcd device to which the host controller bound * @portnum:Port number to which the device is attached. @@ -107,7 +83,7 @@ static const struct hc_driver ehci_xilinx_of_hc_driver = { /* * basic lifecycle operations */ - .reset = ehci_xilinx_of_setup, + .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -219,11 +195,6 @@ static int __devinit ehci_hcd_xilinx_of_probe(struct platform_device *op) /* Debug registers are at the first 0x100 region */ ehci->caps = hcd->regs + 0x100; - ehci->regs = hcd->regs + 0x100 + - HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase)); - - /* cache this readonly data; minimize chip reads */ - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); rv = usb_add_hcd(hcd, irq, 0); if (rv == 0) |