Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...

1 files changed, 38 insertions, 21 deletions

diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index b26fffc58446..3c888d942a9f 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3.h - MediaTek USB3 DRD header
  *
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
 #ifndef __MTU3_H__
@@ -46,6 +37,9 @@ struct mtu3_request;
 #define	MU3D_EP_RXCR1(epnum)	(U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
 #define	MU3D_EP_RXCR2(epnum)	(U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
 
+#define USB_QMU_TQHIAR(epnum)	(U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
+#define USB_QMU_RQHIAR(epnum)	(U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
+
 #define USB_QMU_RQCSR(epnum)	(U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
 #define USB_QMU_RQSAR(epnum)	(U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
 #define USB_QMU_RQCPR(epnum)	(U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
@@ -91,6 +85,7 @@ enum mtu3_speed {
 	MTU3_SPEED_FULL = 1,
 	MTU3_SPEED_HIGH = 3,
 	MTU3_SPEED_SUPER = 4,
+	MTU3_SPEED_SUPER_PLUS = 5,
 };
 
 /**
@@ -112,6 +107,19 @@ enum mtu3_g_ep0_state {
 };
 
 /**
+ * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
+ *		by IDPIN signal.
+ * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
+ *		IDPIN signal.
+ * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
+ */
+enum mtu3_dr_force_mode {
+	MTU3_DR_FORCE_NONE = 0,
+	MTU3_DR_FORCE_HOST,
+	MTU3_DR_FORCE_DEVICE,
+};
+
+/**
  * @base: the base address of fifo
  * @limit: the bitmap size in bits
  * @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
@@ -138,23 +146,33 @@ struct mtu3_fifo_info {
  *	Checksum value is calculated over the 16 bytes of the GPD by default;
  * @data_buf_len (RX ONLY): This value indicates the length of
  *	the assigned data buffer
+ * @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer,
+ *	[7:4] are 4 extension bits of @next_gpd
  * @next_gpd: Physical address of the next GPD
  * @buffer: Physical address of the data buffer
  * @buf_len:
  *	(TX): This value indicates the length of the assigned data buffer
  *	(RX): The total length of data received
  * @ext_len: reserved
+ * @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer,
+ *	[7:4] are 4 extension bits of @next_gpd
  * @ext_flag:
  *	bit5 (TX ONLY): Zero Length Packet (ZLP),
  */
 struct qmu_gpd {
 	__u8 flag;
 	__u8 chksum;
-	__le16 data_buf_len;
+	union {
+		__le16 data_buf_len;
+		__le16 tx_ext_addr;
+	};
 	__le32 next_gpd;
 	__le32 buffer;
 	__le16 buf_len;
-	__u8 ext_len;
+	union {
+		__u8 ext_len;
+		__u8 rx_ext_addr;
+	};
 	__u8 ext_flag;
 } __packed;
 
@@ -183,7 +201,6 @@ struct mtu3_gpd_ring {
 *		xHCI driver initialization, it's necessary for system bootup
 *		as device.
 * @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
-* @id_*: used to maually switch between host and device modes by idpin
 * @manual_drd_enabled: it's true when supports dual-role device by debugfs
 *		to switch host/device modes depending on user input.
 */
@@ -194,10 +211,6 @@ struct otg_switch_mtk {
 	struct notifier_block id_nb;
 	struct delayed_work extcon_reg_dwork;
 	bool is_u3_drd;
-	/* dual-role switch by debugfs */
-	struct pinctrl *id_pinctrl;
-	struct pinctrl_state *id_float;
-	struct pinctrl_state *id_ground;
 	bool manual_drd_enabled;
 };
 
@@ -206,14 +219,17 @@ struct otg_switch_mtk {
  * @ippc_base: register base address of IP Power and Clock interface (IPPC)
  * @vusb33: usb3.3V shared by device/host IP
  * @sys_clk: system clock of mtu3, shared by device/host IP
+ * @ref_clk: reference clock
+ * @mcu_clk: mcu_bus_ck clock for AHB bus etc
+ * @dma_clk: dma_bus_ck clock for AXI bus etc
  * @dr_mode: works in which mode:
  *		host only, device only or dual-role mode
  * @u2_ports: number of usb2.0 host ports
  * @u3_ports: number of usb3.0 host ports
+ * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
+ *		disable u3port0, bit1==1 to disable u3port1,... etc
  * @dbgfs_root: only used when supports manual dual-role switch via debugfs
  * @wakeup_en: it's true when supports remote wakeup in host mode
- * @wk_deb_p0: port0's wakeup debounce clock
- * @wk_deb_p1: it's optional, and depends on port1 is supported or not
  */
 struct ssusb_mtk {
 	struct device *dev;
@@ -226,17 +242,18 @@ struct ssusb_mtk {
 	struct regulator *vusb33;
 	struct clk *sys_clk;
 	struct clk *ref_clk;
+	struct clk *mcu_clk;
+	struct clk *dma_clk;
 	/* otg */
 	struct otg_switch_mtk otg_switch;
 	enum usb_dr_mode dr_mode;
 	bool is_host;
 	int u2_ports;
 	int u3_ports;
+	int u3p_dis_msk;
 	struct dentry *dbgfs_root;
 	/* usb wakeup for host mode */
 	bool wakeup_en;
-	struct clk *wk_deb_p0;
-	struct clk *wk_deb_p1;
 	struct regmap *pericfg;
 };