Merge tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
 "Here is the big set of USB and PHY driver updates for 4.15-rc1.

  There is the usual amount of gadget and xhci driver updates, along
  with phy and chipidea enhancements. There's also a lot of SPDX tags
  and license boilerplate cleanups as well, which provide some churn in
  the diffstat.

  Other major thing is the typec code that moved out of staging and into
  the "real" part of the drivers/usb/ tree, which was nice to see
  happen.

  All of these have been in linux-next with no reported issues for a
  while"

* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
  USB: usbfs: compute urb->actual_length for isochronous
  usb: core: message: remember to reset 'ret' to 0 when necessary
  USB: typec: Remove remaining redundant license text
  USB: typec: add SPDX identifiers to some files
  USB: renesas_usbhs: rcar?.h: add SPDX tags
  USB: chipidea: ci_hdrc_tegra.c: add SPDX line
  USB: host: xhci-debugfs: add SPDX lines
  USB: add SPDX identifiers to all remaining Makefiles
  usb: host: isp1362-hcd: remove a couple of redundant assignments
  USB: adutux: remove redundant variable minor
  usb: core: add a new usb_get_ptm_status() helper
  usb: core: add a 'type' parameter to usb_get_status()
  usb: core: introduce a new usb_get_std_status() helper
  usb: core: rename usb_get_status() 'type' argument to 'recip'
  usb: core: add Status Type definitions
  USB: gadget: Remove redundant license text
  USB: gadget: function: Remove redundant license text
  USB: gadget: udc: Remove redundant license text
  USB: gadget: legacy: Remove redundant license text
  ...

1 files changed, 54 insertions, 18 deletions

diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 99c65b0788ff..b1b99a8f6a7a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
  * mtu3_core.c - hardware access layer and gadget init/exit of
  *                     MediaTek usb3 Dual-Role Controller Driver
@@ -5,18 +6,9 @@
  * Copyright (C) 2016 MediaTek Inc.
  *
  * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -114,7 +106,9 @@ static int mtu3_device_enable(struct mtu3 *mtu)
 	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
 		(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
 		SSUSB_U2_PORT_HOST_SEL));
-	mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+		mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
 
 	return ssusb_check_clocks(mtu->ssusb, check_clk);
 }
@@ -129,7 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu)
 
 	mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
 		SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
-	mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+	if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+		mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
 	mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
 
@@ -236,7 +233,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
 
 void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
 {
-	if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
+	if (mtu->is_u3_ip && mtu->max_speed >= USB_SPEED_SUPER)
 		mtu3_ss_func_set(mtu, is_on);
 	else
 		mtu3_hs_softconn_set(mtu, is_on);
@@ -546,6 +543,9 @@ static void mtu3_set_speed(struct mtu3 *mtu)
 		mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
 		/* HS/FS detected by HW */
 		mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+	} else if (mtu->max_speed == USB_SPEED_SUPER) {
+		mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+			     SSUSB_U3_PORT_SSP_SPEED);
 	}
 
 	dev_info(mtu->dev, "max_speed: %s\n",
@@ -623,6 +623,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
 		udev_speed = USB_SPEED_SUPER;
 		maxpkt = 512;
 		break;
+	case MTU3_SPEED_SUPER_PLUS:
+		udev_speed = USB_SPEED_SUPER_PLUS;
+		maxpkt = 512;
+		break;
 	default:
 		udev_speed = USB_SPEED_UNKNOWN;
 		break;
@@ -759,7 +763,31 @@ static void mtu3_hw_exit(struct mtu3 *mtu)
 	mtu3_mem_free(mtu);
 }
 
-/*-------------------------------------------------------------------------*/
+/**
+ * we set 32-bit DMA mask by default, here check whether the controller
+ * supports 36-bit DMA or not, if it does, set 36-bit DMA mask.
+ */
+static int mtu3_set_dma_mask(struct mtu3 *mtu)
+{
+	struct device *dev = mtu->dev;
+	bool is_36bit = false;
+	int ret = 0;
+	u32 value;
+
+	value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL);
+	if (value & DMA_ADDR_36BIT) {
+		is_36bit = true;
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+		/* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */
+		if (ret) {
+			is_36bit = false;
+			ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		}
+	}
+	dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32");
+
+	return ret;
+}
 
 int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 {
@@ -774,9 +802,9 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 		return -ENOMEM;
 
 	mtu->irq = platform_get_irq(pdev, 0);
-	if (mtu->irq <= 0) {
+	if (mtu->irq < 0) {
 		dev_err(dev, "fail to get irq number\n");
-		return -ENODEV;
+		return mtu->irq;
 	}
 	dev_info(dev, "irq %d\n", mtu->irq);
 
@@ -800,14 +828,15 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 	case USB_SPEED_FULL:
 	case USB_SPEED_HIGH:
 	case USB_SPEED_SUPER:
+	case USB_SPEED_SUPER_PLUS:
 		break;
 	default:
 		dev_err(dev, "invalid max_speed: %s\n",
 			usb_speed_string(mtu->max_speed));
 		/* fall through */
 	case USB_SPEED_UNKNOWN:
-		/* default as SS */
-		mtu->max_speed = USB_SPEED_SUPER;
+		/* default as SSP */
+		mtu->max_speed = USB_SPEED_SUPER_PLUS;
 		break;
 	}
 
@@ -820,6 +849,12 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 		return ret;
 	}
 
+	ret = mtu3_set_dma_mask(mtu);
+	if (ret) {
+		dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret);
+		goto dma_mask_err;
+	}
+
 	ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
 	if (ret) {
 		dev_err(dev, "request irq %d failed!\n", mtu->irq);
@@ -845,6 +880,7 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
 gadget_err:
 	device_init_wakeup(dev, false);
 
+dma_mask_err:
 irq_err:
 	mtu3_hw_exit(mtu);
 	ssusb->u3d = NULL;