Merge tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB 3.5-rc1 changes from Greg Kroah-Hartman:
 "Here is the big USB 3.5-rc1 pull request for the 3.5-rc1 merge window.

  It's touches a lot of different parts of the kernel, all USB drivers,
  due to some API cleanups (getting rid of the ancient err() macro) and
  some changes that are needed for USB 3.0 power management updates.

  There are also lots of new drivers, pimarily gadget, but others as
  well.  We deleted a staging driver, which was nice, and finally
  dropped the obsolete usbfs code, which will make Al happy to never
  have to touch that again.

  There were some build errors in the tree that linux-next found a few
  days ago, but those were fixed by the most recent changes (all were
  due to us not building with CONFIG_PM disabled.)

  Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>"

* tag 'usb-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (477 commits)
  xhci: Fix DIV_ROUND_UP compile error.
  xhci: Fix compile with CONFIG_USB_SUSPEND=n
  USB: Fix core compile with CONFIG_USB_SUSPEND=n
  brcm80211: Fix compile error for .disable_hub_initiated_lpm.
  Revert "USB: EHCI: work around bug in the Philips ISP1562 controller"
  MAINTAINERS: Add myself as maintainer to the USB PHY Layer
  USB: EHCI: fix command register configuration lost problem
  USB: Remove races in devio.c
  USB: ehci-platform: remove update_device
  USB: Disable hub-initiated LPM for comms devices.
  xhci: Add Intel U1/U2 timeout policy.
  xhci: Add infrastructure for host-specific LPM policies.
  USB: Add macros for interrupt endpoint types.
  xhci: Reserve one command for USB3 LPM disable.
  xhci: Some Evaluate Context commands must succeed.
  USB: Disable USB 3.0 LPM in critical sections.
  USB: Add support to enable/disable USB3 link states.
  USB: Allow drivers to disable hub-initiated LPM.
  USB: Calculate USB 3.0 exit latencies for LPM.
  USB: Refactor code to set LPM support flag.
  ...

Conflicts:
	arch/arm/mach-exynos/mach-nuri.c
	arch/arm/mach-exynos/mach-universal_c210.c
	drivers/net/wireless/ath/ath6kl/usb.c

1 files changed, 47 insertions, 67 deletions

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index a1a9062954c4..13b8dd6481f5 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -38,8 +38,6 @@
 
 static bool debug;
 
-#define PL2303_CLOSING_WAIT	(30*HZ)
-
 static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
 	{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
@@ -97,16 +95,6 @@ static const struct usb_device_id id_table[] = {
 
 MODULE_DEVICE_TABLE(usb, id_table);
 
-static struct usb_driver pl2303_driver = {
-	.name =		"pl2303",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-	.suspend =      usb_serial_suspend,
-	.resume =       usb_serial_resume,
-	.supports_autosuspend =	1,
-};
-
 #define SET_LINE_REQUEST_TYPE		0x21
 #define SET_LINE_REQUEST		0x20
 
@@ -161,8 +149,9 @@ static int pl2303_vendor_read(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
 			value, index, buf, 1, 100);
-	dbg("0x%x:0x%x:0x%x:0x%x  %d - %x", VENDOR_READ_REQUEST_TYPE,
-			VENDOR_READ_REQUEST, value, index, res, buf[0]);
+	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d - %x\n",
+		VENDOR_READ_REQUEST_TYPE, VENDOR_READ_REQUEST, value, index,
+		res, buf[0]);
 	return res;
 }
 
@@ -172,8 +161,9 @@ static int pl2303_vendor_write(__u16 value, __u16 index,
 	int res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
 			value, index, NULL, 0, 100);
-	dbg("0x%x:0x%x:0x%x:0x%x  %d", VENDOR_WRITE_REQUEST_TYPE,
-			VENDOR_WRITE_REQUEST, value, index, res);
+	dev_dbg(&serial->dev->dev, "0x%x:0x%x:0x%x:0x%x  %d\n",
+		VENDOR_WRITE_REQUEST_TYPE, VENDOR_WRITE_REQUEST, value, index,
+		res);
 	return res;
 }
 
@@ -196,7 +186,7 @@ static int pl2303_startup(struct usb_serial *serial)
 		type = type_1;
 	else if (serial->dev->descriptor.bDeviceClass == 0xFF)
 		type = type_1;
-	dbg("device type: %d", type);
+	dev_dbg(&serial->interface->dev, "device type: %d\n", type);
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = kzalloc(sizeof(struct pl2303_private), GFP_KERNEL);
@@ -243,7 +233,8 @@ static int set_control_lines(struct usb_device *dev, u8 value)
 	retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
 				 SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
 				 value, 0, NULL, 0, 100);
-	dbg("%s - value = %d, retval = %d", __func__, value, retval);
+	dev_dbg(&dev->dev, "%s - value = %d, retval = %d\n", __func__,
+		value, retval);
 	return retval;
 }
 
@@ -265,8 +256,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	int baud_floor, baud_ceil;
 	int k;
 
-	dbg("%s -  port %d", __func__, port->number);
-
 	/* The PL2303 is reported to lose bytes if you change
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
@@ -287,7 +276,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x\n", i,
 	    buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CSIZE) {
@@ -306,7 +295,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 			buf[6] = 8;
 			break;
 		}
-		dbg("%s - data bits = %d", __func__, buf[6]);
+		dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
 	}
 
 	/* For reference buf[0]:buf[3] baud rate value */
@@ -315,7 +304,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	 *          9600 baud (at least my PL2303X always does)
 	 */
 	baud = tty_get_baud_rate(tty);
-	dbg("%s - baud requested = %d", __func__, baud);
+	dev_dbg(&port->dev, "baud requested = %d\n", baud);
 	if (baud) {
 		/* Set baudrate to nearest supported value */
 		for (k=0; k<ARRAY_SIZE(baud_sup); k++) {
@@ -341,7 +330,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 			else if (baud > 6000000)
 				baud = 6000000;
 		}
-		dbg("%s - baud set = %d", __func__, baud);
+		dev_dbg(&port->dev, "baud set = %d\n", baud);
 		if (baud <= 115200) {
 			buf[0] = baud & 0xff;
 			buf[1] = (baud >> 8) & 0xff;
@@ -372,14 +361,14 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		 */
 		if ((cflag & CSIZE) == CS5) {
 			buf[4] = 1;
-			dbg("%s - stop bits = 1.5", __func__);
+			dev_dbg(&port->dev, "stop bits = 1.5\n");
 		} else {
 			buf[4] = 2;
-			dbg("%s - stop bits = 2", __func__);
+			dev_dbg(&port->dev, "stop bits = 2\n");
 		}
 	} else {
 		buf[4] = 0;
-		dbg("%s - stop bits = 1", __func__);
+		dev_dbg(&port->dev, "stop bits = 1\n");
 	}
 
 	if (cflag & PARENB) {
@@ -391,29 +380,29 @@ static void pl2303_set_termios(struct tty_struct *tty,
 		if (cflag & PARODD) {
 			if (cflag & CMSPAR) {
 				buf[5] = 3;
-				dbg("%s - parity = mark", __func__);
+				dev_dbg(&port->dev, "parity = mark\n");
 			} else {
 				buf[5] = 1;
-				dbg("%s - parity = odd", __func__);
+				dev_dbg(&port->dev, "parity = odd\n");
 			}
 		} else {
 			if (cflag & CMSPAR) {
 				buf[5] = 4;
-				dbg("%s - parity = space", __func__);
+				dev_dbg(&port->dev, "parity = space\n");
 			} else {
 				buf[5] = 2;
-				dbg("%s - parity = even", __func__);
+				dev_dbg(&port->dev, "parity = even\n");
 			}
 		}
 	} else {
 		buf[5] = 0;
-		dbg("%s - parity = none", __func__);
+		dev_dbg(&port->dev, "parity = none\n");
 	}
 
 	i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 			    SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0x21:0x20:0:0  %d", i);
+	dev_dbg(&port->dev, "0x21:0x20:0:0  %d\n", i);
 
 	/* change control lines if we are switching to or from B0 */
 	spin_lock_irqsave(&priv->lock, flags);
@@ -435,7 +424,7 @@ static void pl2303_set_termios(struct tty_struct *tty,
 	i = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
 			    GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
 			    0, 0, buf, 7, 100);
-	dbg("0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x", i,
+	dev_dbg(&port->dev, "0xa1:0x21:0:0  %d - %x %x %x %x %x %x %x\n", i,
 	     buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6]);
 
 	if (cflag & CRTSCTS) {
@@ -473,8 +462,6 @@ static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
 
 static void pl2303_close(struct usb_serial_port *port)
 {
-	dbg("%s - port %d", __func__, port->number);
-
 	usb_serial_generic_close(port);
 	usb_kill_urb(port->interrupt_in_urb);
 }
@@ -486,8 +473,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	int result;
 
-	dbg("%s -  port %d", __func__, port->number);
-
 	if (priv->type != HX) {
 		usb_clear_halt(serial->dev, port->write_urb->pipe);
 		usb_clear_halt(serial->dev, port->read_urb->pipe);
@@ -501,7 +486,6 @@ static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
 	if (tty)
 		pl2303_set_termios(tty, port, &tmp_termios);
 
-	dbg("%s - submitting interrupt urb", __func__);
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (result) {
 		dev_err(&port->dev, "%s - failed submitting interrupt urb,"
@@ -523,12 +507,11 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 			   unsigned int set, unsigned int clear)
 {
 	struct usb_serial_port *port = tty->driver_data;
+	struct usb_serial *serial = port->serial;
 	struct pl2303_private *priv = usb_get_serial_port_data(port);
 	unsigned long flags;
 	u8 control;
-
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
+	int ret;
 
 	spin_lock_irqsave(&priv->lock, flags);
 	if (set & TIOCM_RTS)
@@ -542,7 +525,14 @@ static int pl2303_tiocmset(struct tty_struct *tty,
 	control = priv->line_control;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	return set_control_lines(port->serial->dev, control);
+	mutex_lock(&serial->disc_mutex);
+	if (!serial->disconnected)
+		ret = set_control_lines(serial->dev, control);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&serial->disc_mutex);
+
+	return ret;
 }
 
 static int pl2303_tiocmget(struct tty_struct *tty)
@@ -554,11 +544,6 @@ static int pl2303_tiocmget(struct tty_struct *tty)
 	unsigned int status;
 	unsigned int result;
 
-	dbg("%s (%d)", __func__, port->number);
-
-	if (!usb_get_intfdata(port->serial->interface))
-		return -ENODEV;
-
 	spin_lock_irqsave(&priv->lock, flags);
 	mcr = priv->line_control;
 	status = priv->line_status;
@@ -571,7 +556,7 @@ static int pl2303_tiocmget(struct tty_struct *tty)
 		  | ((status & UART_RING)	? TIOCM_RI  : 0)
 		  | ((status & UART_DCD)	? TIOCM_CD  : 0);
 
-	dbg("%s - result = %x", __func__, result);
+	dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
 
 	return result;
 }
@@ -625,7 +610,8 @@ static int pl2303_ioctl(struct tty_struct *tty,
 {
 	struct serial_struct ser;
 	struct usb_serial_port *port = tty->driver_data;
-	dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
+
+	dev_dbg(&port->dev, "%s cmd = 0x%04x\n", __func__, cmd);
 
 	switch (cmd) {
 	case TIOCGSERIAL:
@@ -641,10 +627,10 @@ static int pl2303_ioctl(struct tty_struct *tty,
 		return 0;
 
 	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__,  port->number);
+		dev_dbg(&port->dev, "%s TIOCMIWAIT\n", __func__);
 		return wait_modem_info(port, arg);
 	default:
-		dbg("%s not supported = 0x%04x", __func__, cmd);
+		dev_dbg(&port->dev, "%s not supported = 0x%04x\n", __func__, cmd);
 		break;
 	}
 	return -ENOIOCTLCMD;
@@ -657,20 +643,18 @@ static void pl2303_break_ctl(struct tty_struct *tty, int break_state)
 	u16 state;
 	int result;
 
-	dbg("%s - port %d", __func__, port->number);
-
 	if (break_state == 0)
 		state = BREAK_OFF;
 	else
 		state = BREAK_ON;
-	dbg("%s - turning break %s", __func__,
+	dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
 			state == BREAK_OFF ? "off" : "on");
 
 	result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
 				 BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
 				 0, NULL, 0, 100);
 	if (result)
-		dbg("%s - error sending break = %d", __func__, result);
+		dev_err(&port->dev, "error sending break = %d\n", result);
 }
 
 static void pl2303_release(struct usb_serial *serial)
@@ -678,8 +662,6 @@ static void pl2303_release(struct usb_serial *serial)
 	int i;
 	struct pl2303_private *priv;
 
-	dbg("%s", __func__);
-
 	for (i = 0; i < serial->num_ports; ++i) {
 		priv = usb_get_serial_port_data(serial->port[i]);
 		kfree(priv);
@@ -742,8 +724,6 @@ static void pl2303_read_int_callback(struct urb *urb)
 	int status = urb->status;
 	int retval;
 
-	dbg("%s (%d)", __func__, port->number);
-
 	switch (status) {
 	case 0:
 		/* success */
@@ -752,12 +732,12 @@ static void pl2303_read_int_callback(struct urb *urb)
 	case -ENOENT:
 	case -ESHUTDOWN:
 		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
+			__func__, status);
 		return;
 	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    status);
+		dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
+			__func__, status);
 		goto exit;
 	}
 
@@ -769,7 +749,7 @@ static void pl2303_read_int_callback(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		dev_err(&urb->dev->dev,
+		dev_err(&port->dev,
 			"%s - usb_submit_urb failed with result %d\n",
 			__func__, retval);
 }
@@ -807,7 +787,7 @@ static void pl2303_process_read_urb(struct urb *urb)
 		tty_flag = TTY_PARITY;
 	else if (line_status & UART_FRAME_ERROR)
 		tty_flag = TTY_FRAME;
-	dbg("%s - tty_flag = %d", __func__, tty_flag);
+	dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__, tty_flag);
 
 	/* overrun is special, not associated with a char */
 	if (line_status & UART_OVERRUN_ERROR)
@@ -855,7 +835,7 @@ static struct usb_serial_driver * const serial_drivers[] = {
 	&pl2303_device, NULL
 };
 
-module_usb_serial_driver(pl2303_driver, serial_drivers);
+module_usb_serial_driver(serial_drivers, id_table);
 
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");