summaryrefslogtreecommitdiff
path: root/drivers/usb/serial
diff options
context:
space:
mode:
authorJohan Hovold <jhovold@gmail.com>2011-04-04 11:38:07 +0200
committerGreg Kroah-Hartman <gregkh@suse.de>2011-04-13 16:48:25 -0700
commitb750106bafbf9e8cb888a2b3681f444d8183a296 (patch)
treede555f59a1644c6715454fbfafb273efd88fdc69 /drivers/usb/serial
parenta87103a6d4a91cbb9be49d3bbd2f35dcf5510da1 (diff)
Revert "USB: sam-ba: add driver for Atmel SAM Boot Assistant (SAM-BA)"
This reverts commit 90593899de83a6e6fdea563d058acd2f4334e3f9. SAM-BA devices identify themselves CDC-ACM devices and should be using the cdc-acm driver. Since commit 5b239f0aebd4dd6f85b13decf5e18e86e35d57f0 (USB: cdc-acm: Add pseudo modem without AT command capabilities) cdc-acm also binds to them. Note that the Atmel SAM-BA tools expect to use a USB-serial driver and thus require a symlink from /dev/ttyACMn to some /dev/ttyUSBm (with m < 30) to be able to select the device. This is simply a UI-issue that should be fixed by Atmel. Tested with the SAM-BA 2.10 tools and an Atmel at91sam9260-ek. Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Sven Köhler <sven.koehler@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/usb/serial')
-rw-r--r--drivers/usb/serial/Kconfig9
-rw-r--r--drivers/usb/serial/Makefile1
-rw-r--r--drivers/usb/serial/sam-ba.c206
3 files changed, 0 insertions, 216 deletions
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index c2b29761fa98..b71e309116a3 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -527,15 +527,6 @@ config USB_SERIAL_SAFE_PADDED
bool "USB Secure Encapsulated Driver - Padded"
depends on USB_SERIAL_SAFE
-config USB_SERIAL_SAMBA
- tristate "USB Atmel SAM Boot Assistant (SAM-BA) driver"
- help
- Say Y here if you want to access the SAM-BA boot application of an
- Atmel AT91SAM device.
-
- To compile this driver as a module, choose M here: the
- module will be called sam-ba.
-
config USB_SERIAL_SIEMENS_MPI
tristate "USB Siemens MPI driver"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 9a2117f2b06e..9e536eefb32c 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -48,7 +48,6 @@ obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o
obj-$(CONFIG_USB_SERIAL_QCAUX) += qcaux.o
obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o
obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o
-obj-$(CONFIG_USB_SERIAL_SAMBA) += sam-ba.o
obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o
obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o
obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o
diff --git a/drivers/usb/serial/sam-ba.c b/drivers/usb/serial/sam-ba.c
deleted file mode 100644
index e3bba64afc57..000000000000
--- a/drivers/usb/serial/sam-ba.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Atmel SAM Boot Assistant (SAM-BA) driver
- *
- * Copyright (C) 2010 Johan Hovold <jhovold@gmail.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License version
- * 2 as published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define DRIVER_VERSION "v1.0"
-#define DRIVER_AUTHOR "Johan Hovold <jhovold@gmail.com>"
-#define DRIVER_DESC "Atmel SAM Boot Assistant (SAM-BA) driver"
-
-#define SAMBA_VENDOR_ID 0x3eb
-#define SAMBA_PRODUCT_ID 0x6124
-
-
-static int debug;
-
-static const struct usb_device_id id_table[] = {
- /*
- * NOTE: Only match the CDC Data interface.
- */
- { USB_DEVICE_AND_INTERFACE_INFO(SAMBA_VENDOR_ID, SAMBA_PRODUCT_ID,
- USB_CLASS_CDC_DATA, 0, 0) },
- { }
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-static struct usb_driver samba_driver = {
- .name = "sam-ba",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
- .no_dynamic_id = 1,
-};
-
-
-/*
- * NOTE: The SAM-BA firmware cannot handle merged write requests so we cannot
- * use the generic write implementation (which uses the port write fifo).
- */
-static int samba_write(struct tty_struct *tty, struct usb_serial_port *port,
- const unsigned char *buf, int count)
-{
- struct urb *urb;
- unsigned long flags;
- int result;
- int i;
-
- if (!count)
- return 0;
-
- count = min_t(int, count, port->bulk_out_size);
-
- spin_lock_irqsave(&port->lock, flags);
- if (!port->write_urbs_free) {
- spin_unlock_irqrestore(&port->lock, flags);
- return 0;
- }
- i = find_first_bit(&port->write_urbs_free,
- ARRAY_SIZE(port->write_urbs));
- __clear_bit(i, &port->write_urbs_free);
- port->tx_bytes += count;
- spin_unlock_irqrestore(&port->lock, flags);
-
- urb = port->write_urbs[i];
- memcpy(urb->transfer_buffer, buf, count);
- urb->transfer_buffer_length = count;
- usb_serial_debug_data(debug, &port->dev, __func__, count,
- urb->transfer_buffer);
- result = usb_submit_urb(urb, GFP_ATOMIC);
- if (result) {
- dev_err(&port->dev, "%s - error submitting urb: %d\n",
- __func__, result);
- spin_lock_irqsave(&port->lock, flags);
- __set_bit(i, &port->write_urbs_free);
- port->tx_bytes -= count;
- spin_unlock_irqrestore(&port->lock, flags);
-
- return result;
- }
-
- return count;
-}
-
-static int samba_write_room(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- unsigned long flags;
- unsigned long free;
- int count;
- int room;
-
- spin_lock_irqsave(&port->lock, flags);
- free = port->write_urbs_free;
- spin_unlock_irqrestore(&port->lock, flags);
-
- count = hweight_long(free);
- room = count * port->bulk_out_size;
-
- dbg("%s - returns %d", __func__, room);
-
- return room;
-}
-
-static int samba_chars_in_buffer(struct tty_struct *tty)
-{
- struct usb_serial_port *port = tty->driver_data;
- unsigned long flags;
- int chars;
-
- spin_lock_irqsave(&port->lock, flags);
- chars = port->tx_bytes;
- spin_unlock_irqrestore(&port->lock, flags);
-
- dbg("%s - returns %d", __func__, chars);
-
- return chars;
-}
-
-static void samba_write_bulk_callback(struct urb *urb)
-{
- struct usb_serial_port *port = urb->context;
- unsigned long flags;
- int i;
-
- dbg("%s - port %d", __func__, port->number);
-
- for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) {
- if (port->write_urbs[i] == urb)
- break;
- }
- spin_lock_irqsave(&port->lock, flags);
- __set_bit(i, &port->write_urbs_free);
- port->tx_bytes -= urb->transfer_buffer_length;
- spin_unlock_irqrestore(&port->lock, flags);
-
- if (urb->status)
- dbg("%s - non-zero urb status: %d", __func__, urb->status);
-
- usb_serial_port_softint(port);
-}
-
-static struct usb_serial_driver samba_device = {
- .driver = {
- .owner = THIS_MODULE,
- .name = "sam-ba",
- },
- .usb_driver = &samba_driver,
- .id_table = id_table,
- .num_ports = 1,
- .bulk_in_size = 512,
- .bulk_out_size = 2048,
- .write = samba_write,
- .write_room = samba_write_room,
- .chars_in_buffer = samba_chars_in_buffer,
- .write_bulk_callback = samba_write_bulk_callback,
- .throttle = usb_serial_generic_throttle,
- .unthrottle = usb_serial_generic_unthrottle,
-};
-
-static int __init samba_init(void)
-{
- int retval;
-
- retval = usb_serial_register(&samba_device);
- if (retval)
- return retval;
-
- retval = usb_register(&samba_driver);
- if (retval) {
- usb_serial_deregister(&samba_device);
- return retval;
- }
-
- printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ": "
- DRIVER_DESC "\n");
- return 0;
-}
-
-static void __exit samba_exit(void)
-{
- usb_deregister(&samba_driver);
- usb_serial_deregister(&samba_device);
-}
-
-module_init(samba_init);
-module_exit(samba_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL");
-
-module_param(debug, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "Enable verbose debugging messages");