summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
authorElric Fu <elricfu1@gmail.com>2012-02-18 13:32:27 +0800
committerSarah Sharp <sarah.a.sharp@linux.intel.com>2012-02-21 15:45:25 -0800
commita45aa3b30583e7d54e7cf4fbcd0aa699348a6e5c (patch)
tree98a28b1d77d0425000a77f55868bc5367065107c /drivers/usb
parentcab928ee1f221c9cc48d6615070fefe2e444384a (diff)
USB: Set hub depth after USB3 hub reset
The superspeed device attached to a USB 3.0 hub(such as VIA's) doesn't respond the address device command after resume. The root cause is the superspeed hub will miss the Hub Depth value that is used as an offset into the route string to locate the bits it uses to determine the downstream port number after reset, and all packets can't be routed to the device attached to the superspeed hub. Hub driver sends a Set Hub Depth request to the superspeed hub except for USB 3.0 root hub when the hub is initialized and doesn't send the request again after reset due to the resume process. So moving the code that sends the Set Hub Depth request to the superspeed hub from hub_configure() to hub_activate() is to cover those situations include initialization and reset. The patch should be backported to kernels as old as 2.6.39. Signed-off-by: Elric Fu <elricfu1@gmail.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable@vger.kernel.org
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/hub.c30
1 files changed, 17 insertions, 13 deletions
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a0613d8f9be7..265c2f675d04 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -705,10 +705,26 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
if (type == HUB_INIT3)
goto init3;
- /* After a resume, port power should still be on.
+ /* The superspeed hub except for root hub has to use Hub Depth
+ * value as an offset into the route string to locate the bits
+ * it uses to determine the downstream port number. So hub driver
+ * should send a set hub depth request to superspeed hub after
+ * the superspeed hub is set configuration in initialization or
+ * reset procedure.
+ *
+ * After a resume, port power should still be on.
* For any other type of activation, turn it on.
*/
if (type != HUB_RESUME) {
+ if (hdev->parent && hub_is_superspeed(hdev)) {
+ ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
+ HUB_SET_DEPTH, USB_RT_HUB,
+ hdev->level - 1, 0, NULL, 0,
+ USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ dev_err(hub->intfdev,
+ "set hub depth failed\n");
+ }
/* Speed up system boot by using a delayed_work for the
* hub's initial power-up delays. This is pretty awkward
@@ -987,18 +1003,6 @@ static int hub_configure(struct usb_hub *hub,
goto fail;
}
- if (hub_is_superspeed(hdev) && (hdev->parent != NULL)) {
- ret = usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
- HUB_SET_DEPTH, USB_RT_HUB,
- hdev->level - 1, 0, NULL, 0,
- USB_CTRL_SET_TIMEOUT);
-
- if (ret < 0) {
- message = "can't set hub depth";
- goto fail;
- }
- }
-
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.