summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorJernej Skrabec <jernej.skrabec@siol.net>2021-02-09 18:58:57 +0100
committerMaxime Ripard <maxime@cerno.tech>2021-02-10 11:19:56 +0100
commit50791f5d7b6a14b388f46c8885f71d1b98216d1d (patch)
tree84da1bd23227a2b8295a8b69148fa3b40f717d07 /drivers
parent873e5bb9fbd99e4a26c448b5c7af942a6d7aa60d (diff)
drm/sun4i: tcon: set sync polarity for tcon1 channel
Channel 1 has polarity bits for vsync and hsync signals but driver never sets them. It turns out that with pre-HDMI2 controllers seemingly there is no issue if polarity is not set. However, with HDMI2 controllers (H6) there often comes to de-synchronization due to phase shift. This causes flickering screen. It's safe to assume that similar issues might happen also with pre-HDMI2 controllers. Solve issue with setting vsync and hsync polarity. Note that display stacks with tcon top have polarity bits actually in tcon0 polarity register. Fixes: 9026e0d122ac ("drm: Add Allwinner A10 Display Engine support") Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210209175900.7092-3-jernej.skrabec@siol.net
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpu/drm/sun4i/sun4i_tcon.c25
-rw-r--r--drivers/gpu/drm/sun4i/sun4i_tcon.h6
2 files changed, 31 insertions, 0 deletions
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index eaaf5d70e352..1e643bc7e786 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -689,6 +689,30 @@ static void sun4i_tcon1_mode_set(struct sun4i_tcon *tcon,
SUN4I_TCON1_BASIC5_V_SYNC(vsync) |
SUN4I_TCON1_BASIC5_H_SYNC(hsync));
+ /* Setup the polarity of multiple signals */
+ if (tcon->quirks->polarity_in_ch0) {
+ val = 0;
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= SUN4I_TCON0_IO_POL_HSYNC_POSITIVE;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= SUN4I_TCON0_IO_POL_VSYNC_POSITIVE;
+
+ regmap_write(tcon->regs, SUN4I_TCON0_IO_POL_REG, val);
+ } else {
+ /* according to vendor driver, this bit must be always set */
+ val = SUN4I_TCON1_IO_POL_UNKNOWN;
+
+ if (mode->flags & DRM_MODE_FLAG_PHSYNC)
+ val |= SUN4I_TCON1_IO_POL_HSYNC_POSITIVE;
+
+ if (mode->flags & DRM_MODE_FLAG_PVSYNC)
+ val |= SUN4I_TCON1_IO_POL_VSYNC_POSITIVE;
+
+ regmap_write(tcon->regs, SUN4I_TCON1_IO_POL_REG, val);
+ }
+
/* Map output pins to channel 1 */
regmap_update_bits(tcon->regs, SUN4I_TCON_GCTL_REG,
SUN4I_TCON_GCTL_IOMAP_MASK,
@@ -1517,6 +1541,7 @@ static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
.has_channel_1 = true,
+ .polarity_in_ch0 = true,
.set_mux = sun8i_r40_tcon_tv_set_mux,
};
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index cfbf4e6c1679..ee555318e3c2 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -153,6 +153,11 @@
#define SUN4I_TCON1_BASIC5_V_SYNC(height) (((height) - 1) & 0x3ff)
#define SUN4I_TCON1_IO_POL_REG 0xf0
+/* there is no documentation about this bit */
+#define SUN4I_TCON1_IO_POL_UNKNOWN BIT(26)
+#define SUN4I_TCON1_IO_POL_HSYNC_POSITIVE BIT(25)
+#define SUN4I_TCON1_IO_POL_VSYNC_POSITIVE BIT(24)
+
#define SUN4I_TCON1_IO_TRI_REG 0xf4
#define SUN4I_TCON_ECC_FIFO_REG 0xf8
@@ -235,6 +240,7 @@ struct sun4i_tcon_quirks {
bool needs_de_be_mux; /* sun6i needs mux to select backend */
bool needs_edp_reset; /* a80 edp reset needed for tcon0 access */
bool supports_lvds; /* Does the TCON support an LVDS output? */
+ bool polarity_in_ch0; /* some tcon1 channels have polarity bits in tcon0 pol register */
u8 dclk_min_div; /* minimum divider for TCON0 DCLK */
/* callback to handle tcon muxing options */