summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 11:18:24 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-12-13 11:18:24 -0800
commit5266e70335dac35c35b5ca9cea4251c1389d4a68 (patch)
treec8bfdcc37b922a0978ea7aab4a43685ee9f33c3e /drivers
parent03f8d4cca352fd41f26b5c88dec1e4d3f507f5de (diff)
parenta9b01b5823f73dc741b623dfc52ccd68f8139b55 (diff)
Merge tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH: "Here's the tty/serial patchset for 4.10-rc1. It's been a quiet kernel cycle for this subsystem, just a small number of changes. A few new serial drivers, and some cleanups to the old vgacon logic, and other minor serial driver changes as well. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (54 commits) serial: 8250_mid fix calltrace when hotplug 8250 serial controller console: Move userspace I/O out of console_lock to fix lockdep warning tty: nozomi: avoid sprintf buffer overflow serial: 8250_pci: Detach low-level driver during PCI error recovery serial: core: don't check port twice in a row mxs-auart: count FIFO overrun errors serial: 8250_dw: Add support for IrDA SIR mode serial: 8250: Expose set_ldisc function serial: 8250: Add IrDA to UART capabilities serial: 8250_dma: power off device after TX is done serial: 8250_port: export serial8250_rpm_{get|put}_tx() serial: sunsu: Free memory when probe fails serial: sunhv: Free memory when remove() is called vt: fix Scroll Lock LED trigger name tty: typo in comments in drivers/tty/vt/keyboard.c tty: amba-pl011: Add earlycon support for SBSA UART tty: nozomi: use permission-specific DEVICE_ATTR variants tty: serial: Make the STM32 serial port depend on it's arch serial: ifx6x60: Free memory when probe fails serial: ioc4_serial: Free memory when kzalloc fails during probe ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/amiserial.c2
-rw-r--r--drivers/tty/nozomi.c51
-rw-r--r--drivers/tty/rocket.c4
-rw-r--r--drivers/tty/serial/8250/8250.h6
-rw-r--r--drivers/tty/serial/8250/8250_core.c7
-rw-r--r--drivers/tty/serial/8250/8250_dma.c9
-rw-r--r--drivers/tty/serial/8250/8250_dw.c22
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c231
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c7
-rw-r--r--drivers/tty/serial/8250/8250_mid.c4
-rw-r--r--drivers/tty/serial/8250/8250_of.c2
-rw-r--r--drivers/tty/serial/8250/8250_pci.c57
-rw-r--r--drivers/tty/serial/8250/8250_port.c18
-rw-r--r--drivers/tty/serial/8250/8250_pxa.c190
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c46
-rw-r--r--drivers/tty/serial/8250/Kconfig10
-rw-r--r--drivers/tty/serial/8250/Makefile1
-rw-r--r--drivers/tty/serial/Kconfig19
-rw-r--r--drivers/tty/serial/Makefile7
-rw-r--r--drivers/tty/serial/amba-pl011.c56
-rw-r--r--drivers/tty/serial/crisv10.c2
-rw-r--r--drivers/tty/serial/fsl_lpuart.c64
-rw-r--r--drivers/tty/serial/ifx6x60.c1
-rw-r--r--drivers/tty/serial/ioc4_serial.c7
-rw-r--r--drivers/tty/serial/mxs-auart.c2
-rw-r--r--drivers/tty/serial/pxa.c2
-rw-r--r--drivers/tty/serial/sc16is7xx.c2
-rw-r--r--drivers/tty/serial/serial_core.c17
-rw-r--r--drivers/tty/serial/sh-sci.c20
-rw-r--r--drivers/tty/serial/sunhv.c3
-rw-r--r--drivers/tty/serial/sunsu.c1
-rw-r--r--drivers/tty/vt/consolemap.c115
-rw-r--r--drivers/tty/vt/keyboard.c4
-rw-r--r--drivers/tty/vt/vt.c85
-rw-r--r--drivers/usb/misc/sisusbvga/sisusb_con.c55
-rw-r--r--drivers/video/console/fbcon.c18
-rw-r--r--drivers/video/console/mdacon.c7
-rw-r--r--drivers/video/console/newport_con.c8
-rw-r--r--drivers/video/console/sticon.c7
-rw-r--r--drivers/video/console/vgacon.c133
40 files changed, 892 insertions, 410 deletions
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 208f573495dc..dfbb974927f2 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -1012,8 +1012,6 @@ static int get_serial_info(struct tty_struct *tty, struct serial_state *state,
{
struct serial_struct tmp;
- if (!retinfo)
- return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tty_lock(tty);
tmp.line = tty->index;
diff --git a/drivers/tty/nozomi.c b/drivers/tty/nozomi.c
index d6fd0e802ef5..39b3723a32a6 100644
--- a/drivers/tty/nozomi.c
+++ b/drivers/tty/nozomi.c
@@ -63,44 +63,23 @@
#define VERSION_STRING DRIVER_DESC " 2.1d"
-/* Macros definitions */
-
/* Default debug printout level */
#define NOZOMI_DEBUG_LEVEL 0x00
-
-#define P_BUF_SIZE 128
-#define NFO(_err_flag_, args...) \
-do { \
- char tmp[P_BUF_SIZE]; \
- snprintf(tmp, sizeof(tmp), ##args); \
- printk(_err_flag_ "[%d] %s(): %s\n", __LINE__, \
- __func__, tmp); \
-} while (0)
-
-#define DBG1(args...) D_(0x01, ##args)
-#define DBG2(args...) D_(0x02, ##args)
-#define DBG3(args...) D_(0x04, ##args)
-#define DBG4(args...) D_(0x08, ##args)
-#define DBG5(args...) D_(0x10, ##args)
-#define DBG6(args...) D_(0x20, ##args)
-#define DBG7(args...) D_(0x40, ##args)
-#define DBG8(args...) D_(0x80, ##args)
-
-#ifdef DEBUG
-/* Do we need this settable at runtime? */
static int debug = NOZOMI_DEBUG_LEVEL;
+module_param(debug, int, S_IRUGO | S_IWUSR);
-#define D(lvl, args...) do \
- {if (lvl & debug) NFO(KERN_DEBUG, ##args); } \
- while (0)
-#define D_(lvl, args...) D(lvl, ##args)
-
-/* These printouts are always printed */
+/* Macros definitions */
+#define DBG_(lvl, fmt, args...) \
+do { \
+ if (lvl & debug) \
+ pr_debug("[%d] %s(): " fmt "\n", \
+ __LINE__, __func__, ##args); \
+} while (0)
-#else
-static int debug;
-#define D_(lvl, args...)
-#endif
+#define DBG1(args...) DBG_(0x01, ##args)
+#define DBG2(args...) DBG_(0x02, ##args)
+#define DBG3(args...) DBG_(0x04, ##args)
+#define DBG4(args...) DBG_(0x08, ##args)
/* TODO: rewrite to optimize macros... */
@@ -1320,7 +1299,7 @@ static ssize_t card_type_show(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%d\n", dc->card_type);
}
-static DEVICE_ATTR(card_type, S_IRUGO, card_type_show, NULL);
+static DEVICE_ATTR_RO(card_type);
static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
char *buf)
@@ -1329,7 +1308,7 @@ static ssize_t open_ttys_show(struct device *dev, struct device_attribute *attr,
return sprintf(buf, "%u\n", dc->open_ttys);
}
-static DEVICE_ATTR(open_ttys, S_IRUGO, open_ttys_show, NULL);
+static DEVICE_ATTR_RO(open_ttys);
static void make_sysfs_files(struct nozomi *dc)
{
@@ -1943,7 +1922,5 @@ static __exit void nozomi_exit(void)
module_init(nozomi_init);
module_exit(nozomi_exit);
-module_param(debug, int, S_IRUGO | S_IWUSR);
-
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c
index b0cc47c77b40..d66c1edd9892 100644
--- a/drivers/tty/rocket.c
+++ b/drivers/tty/rocket.c
@@ -1189,8 +1189,6 @@ static int get_config(struct r_port *info, struct rocket_config __user *retinfo)
{
struct rocket_config tmp;
- if (!retinfo)
- return -EFAULT;
memset(&tmp, 0, sizeof (tmp));
mutex_lock(&info->port.mutex);
tmp.line = info->line;
@@ -1255,8 +1253,6 @@ static int get_ports(struct r_port *info, struct rocket_ports __user *retports)
struct rocket_ports tmp;
int board;
- if (!retports)
- return -EFAULT;
memset(&tmp, 0, sizeof (tmp));
tmp.tty_major = rocket_driver->major;
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index a697a8585ddc..ce8d4ffcc425 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -80,6 +80,7 @@ struct serial8250_config {
#define UART_CAP_RTOIE (1 << 13) /* UART needs IER bit 4 set (Xscale, Tegra) */
#define UART_CAP_HFIFO (1 << 14) /* UART has a "hidden" FIFO */
#define UART_CAP_RPM (1 << 15) /* Runtime PM is active while idle */
+#define UART_CAP_IRDA (1 << 16) /* UART supports IrDA line discipline */
#define UART_BUG_QUOT (1 << 0) /* UART has buggy quot LSB */
#define UART_BUG_TXEN (1 << 1) /* UART has buggy TX IIR status */
@@ -129,8 +130,13 @@ static inline void serial_dl_write(struct uart_8250_port *up, int value)
}
struct uart_8250_port *serial8250_get_port(int line);
+
void serial8250_rpm_get(struct uart_8250_port *p);
void serial8250_rpm_put(struct uart_8250_port *p);
+
+void serial8250_rpm_get_tx(struct uart_8250_port *p);
+void serial8250_rpm_put_tx(struct uart_8250_port *p);
+
int serial8250_em485_init(struct uart_8250_port *p);
void serial8250_em485_destroy(struct uart_8250_port *p);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 240a361b674f..61569a765d9e 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -425,10 +425,10 @@ struct uart_8250_port *serial8250_get_port(int line)
EXPORT_SYMBOL_GPL(serial8250_get_port);
static void (*serial8250_isa_config)(int port, struct uart_port *up,
- unsigned short *capabilities);
+ u32 *capabilities);
void serial8250_set_isa_configurator(
- void (*v)(int port, struct uart_port *up, unsigned short *capabilities))
+ void (*v)(int port, struct uart_port *up, u32 *capabilities))
{
serial8250_isa_config = v;
}
@@ -830,6 +830,7 @@ static int serial8250_probe(struct platform_device *dev)
uart.port.handle_irq = p->handle_irq;
uart.port.handle_break = p->handle_break;
uart.port.set_termios = p->set_termios;
+ uart.port.set_ldisc = p->set_ldisc;
uart.port.get_mctrl = p->get_mctrl;
uart.port.pm = p->pm;
uart.port.dev = &dev->dev;
@@ -1023,6 +1024,8 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
/* Possibly override set_termios call */
if (up->port.set_termios)
uart->port.set_termios = up->port.set_termios;
+ if (up->port.set_ldisc)
+ uart->port.set_ldisc = up->port.set_ldisc;
if (up->port.get_mctrl)
uart->port.get_mctrl = up->port.get_mctrl;
if (up->port.set_mctrl)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index fdbddbc6375d..26f17456b0d7 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -72,10 +72,15 @@ int serial8250_tx_dma(struct uart_8250_port *p)
struct dma_async_tx_descriptor *desc;
int ret;
- if (uart_tx_stopped(&p->port) || dma->tx_running ||
- uart_circ_empty(xmit))
+ if (dma->tx_running)
return 0;
+ if (uart_tx_stopped(&p->port) || uart_circ_empty(xmit)) {
+ /* We have been called from __dma_tx_complete() */
+ serial8250_rpm_put_tx(p);
+ return 0;
+ }
+
dma->tx_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
desc = dmaengine_prep_slave_single(dma->txchan,
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 459d726f9d59..c89fafc972b6 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -53,6 +53,8 @@
/* Helper for fifo size calculation */
#define DW_UART_CPR_FIFO_SIZE(a) (((a >> 16) & 0xff) * 16)
+/* DesignWare specific register fields */
+#define DW_UART_MCR_SIRE BIT(6)
struct dw8250_data {
u8 usr_reg;
@@ -254,6 +256,22 @@ out:
serial8250_do_set_termios(p, termios, old);
}
+static void dw8250_set_ldisc(struct uart_port *p, struct ktermios *termios)
+{
+ struct uart_8250_port *up = up_to_u8250p(p);
+ unsigned int mcr = p->serial_in(p, UART_MCR);
+
+ if (up->capabilities & UART_CAP_IRDA) {
+ if (termios->c_line == N_IRDA)
+ mcr |= DW_UART_MCR_SIRE;
+ else
+ mcr &= ~DW_UART_MCR_SIRE;
+
+ p->serial_out(p, UART_MCR, mcr);
+ }
+ serial8250_do_set_ldisc(p, termios);
+}
+
/*
* dw8250_fallback_dma_filter will prevent the UART from getting just any free
* channel on platforms that have DMA engines, but don't have any channels
@@ -357,6 +375,9 @@ static void dw8250_setup_port(struct uart_port *p)
if (reg & DW_UART_CPR_AFCE_MODE)
up->capabilities |= UART_CAP_AFE;
+
+ if (reg & DW_UART_CPR_SIR_MODE)
+ up->capabilities |= UART_CAP_IRDA;
}
static int dw8250_probe(struct platform_device *pdev)
@@ -392,6 +413,7 @@ static int dw8250_probe(struct platform_device *pdev)
p->iotype = UPIO_MEM;
p->serial_in = dw8250_serial_in;
p->serial_out = dw8250_serial_out;
+ p->set_ldisc = dw8250_set_ldisc;
p->membase = devm_ioremap(dev, regs->start, resource_size(regs));
if (!p->membase)
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 0facc789fe7d..b67e7a544935 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -21,8 +21,11 @@
#define EXIT_KEY 0xAA
#define CHIP_ID1 0x20
#define CHIP_ID2 0x21
-#define CHIP_ID_0 0x1602
-#define CHIP_ID_1 0x0501
+#define CHIP_ID_F81865 0x0407
+#define CHIP_ID_F81866 0x1010
+#define CHIP_ID_F81216AD 0x1602
+#define CHIP_ID_F81216H 0x0501
+#define CHIP_ID_F81216 0x0802
#define VENDOR_ID1 0x23
#define VENDOR_ID1_VAL 0x19
#define VENDOR_ID2 0x24
@@ -43,12 +46,60 @@
#define RXW4C_IRA BIT(3)
#define TXW4C_IRA BIT(2)
+#define FIFO_CTRL 0xF6
+#define FIFO_MODE_MASK (BIT(1) | BIT(0))
+#define FIFO_MODE_128 (BIT(1) | BIT(0))
+#define RXFTHR_MODE_MASK (BIT(5) | BIT(4))
+#define RXFTHR_MODE_4X BIT(5)
+
+#define F81216_LDN_LOW 0x0
+#define F81216_LDN_HIGH 0x4
+
+/*
+ * F81866 registers
+ *
+ * The IRQ setting mode of F81866 is not the same with F81216 series.
+ * Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
+ * Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ */
+#define F81866_IRQ_MODE 0xf0
+#define F81866_IRQ_SHARE BIT(0)
+#define F81866_IRQ_MODE0 BIT(1)
+
+#define F81866_FIFO_CTRL FIFO_CTRL
+#define F81866_IRQ_MODE1 BIT(3)
+
+#define F81866_LDN_LOW 0x10
+#define F81866_LDN_HIGH 0x16
+
struct fintek_8250 {
+ u16 pid;
u16 base_port;
u8 index;
u8 key;
};
+static u8 sio_read_reg(struct fintek_8250 *pdata, u8 reg)
+{
+ outb(reg, pdata->base_port + ADDR_PORT);
+ return inb(pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_reg(struct fintek_8250 *pdata, u8 reg, u8 data)
+{
+ outb(reg, pdata->base_port + ADDR_PORT);
+ outb(data, pdata->base_port + DATA_PORT);
+}
+
+static void sio_write_mask_reg(struct fintek_8250 *pdata, u8 reg, u8 mask,
+ u8 data)
+{
+ u8 tmp;
+
+ tmp = (sio_read_reg(pdata, reg) & ~mask) | (mask & data);
+ sio_write_reg(pdata, reg, tmp);
+}
+
static int fintek_8250_enter_key(u16 base_port, u8 key)
{
if (!request_muxed_region(base_port, 2, "8250_fintek"))
@@ -66,29 +117,55 @@ static void fintek_8250_exit_key(u16 base_port)
release_region(base_port + ADDR_PORT, 2);
}
-static int fintek_8250_check_id(u16 base_port)
+static int fintek_8250_check_id(struct fintek_8250 *pdata)
{
u16 chip;
- outb(VENDOR_ID1, base_port + ADDR_PORT);
- if (inb(base_port + DATA_PORT) != VENDOR_ID1_VAL)
+ if (sio_read_reg(pdata, VENDOR_ID1) != VENDOR_ID1_VAL)
return -ENODEV;
- outb(VENDOR_ID2, base_port + ADDR_PORT);
- if (inb(base_port + DATA_PORT) != VENDOR_ID2_VAL)
+ if (sio_read_reg(pdata, VENDOR_ID2) != VENDOR_ID2_VAL)
return -ENODEV;
- outb(CHIP_ID1, base_port + ADDR_PORT);
- chip = inb(base_port + DATA_PORT);
- outb(CHIP_ID2, base_port + ADDR_PORT);
- chip |= inb(base_port + DATA_PORT) << 8;
-
- if (chip != CHIP_ID_0 && chip != CHIP_ID_1)
+ chip = sio_read_reg(pdata, CHIP_ID1);
+ chip |= sio_read_reg(pdata, CHIP_ID2) << 8;
+
+ switch (chip) {
+ case CHIP_ID_F81865:
+ case CHIP_ID_F81866:
+ case CHIP_ID_F81216AD:
+ case CHIP_ID_F81216H:
+ case CHIP_ID_F81216:
+ break;
+ default:
return -ENODEV;
+ }
+ pdata->pid = chip;
return 0;
}
+static int fintek_8250_get_ldn_range(struct fintek_8250 *pdata, int *min,
+ int *max)
+{
+ switch (pdata->pid) {
+ case CHIP_ID_F81865:
+ case CHIP_ID_F81866:
+ *min = F81866_LDN_LOW;
+ *max = F81866_LDN_HIGH;
+ return 0;
+
+ case CHIP_ID_F81216AD:
+ case CHIP_ID_F81216H:
+ case CHIP_ID_F81216:
+ *min = F81216_LDN_LOW;
+ *max = F81216_LDN_HIGH;
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
static int fintek_8250_rs485_config(struct uart_port *port,
struct serial_rs485 *rs485)
{
@@ -128,10 +205,8 @@ static int fintek_8250_rs485_config(struct uart_port *port,
if (fintek_8250_enter_key(pdata->base_port, pdata->key))
return -EBUSY;
- outb(LDN, pdata->base_port + ADDR_PORT);
- outb(pdata->index, pdata->base_port + DATA_PORT);
- outb(RS485, pdata->base_port + ADDR_PORT);
- outb(config, pdata->base_port + DATA_PORT);
+ sio_write_reg(pdata, LDN, pdata->index);
+ sio_write_reg(pdata, RS485, config);
fintek_8250_exit_key(pdata->base_port);
port->rs485 = *rs485;
@@ -139,40 +214,90 @@ static int fintek_8250_rs485_config(struct uart_port *port,
return 0;
}
-static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
+static void fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool is_level)
+{
+ sio_write_reg(pdata, LDN, pdata->index);
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81866:
+ sio_write_mask_reg(pdata, F81866_FIFO_CTRL, F81866_IRQ_MODE1,
+ 0);
+ /* fall through */
+ case CHIP_ID_F81865:
+ sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_SHARE,
+ F81866_IRQ_SHARE);
+ sio_write_mask_reg(pdata, F81866_IRQ_MODE, F81866_IRQ_MODE0,
+ is_level ? 0 : F81866_IRQ_MODE0);
+ break;
+
+ case CHIP_ID_F81216AD:
+ case CHIP_ID_F81216H:
+ case CHIP_ID_F81216:
+ sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_SHARE,
+ IRQ_SHARE);
+ sio_write_mask_reg(pdata, FINTEK_IRQ_MODE, IRQ_MODE_MASK,
+ is_level ? IRQ_LEVEL_LOW : IRQ_EDGE_HIGH);
+ break;
+ }
+}
+
+static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
+{
+ switch (pdata->pid) {
+ case CHIP_ID_F81216H: /* 128Bytes FIFO */
+ case CHIP_ID_F81866:
+ sio_write_mask_reg(pdata, FIFO_CTRL,
+ FIFO_MODE_MASK | RXFTHR_MODE_MASK,
+ FIFO_MODE_128 | RXFTHR_MODE_4X);
+ break;
+
+ default: /* Default 16Bytes FIFO */
+ break;
+ }
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
+ unsigned int irq)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
- int i, j, k;
+ struct irq_data *irq_data;
+ bool level_mode = false;
+ int i, j, k, min, max;
for (i = 0; i < ARRAY_SIZE(addr); i++) {
for (j = 0; j < ARRAY_SIZE(keys); j++) {
+ pdata->base_port = addr[i];
+ pdata->key = keys[j];
if (fintek_8250_enter_key(addr[i], keys[j]))
continue;
- if (fintek_8250_check_id(addr[i])) {
+ if (fintek_8250_check_id(pdata) ||
+ fintek_8250_get_ldn_range(pdata, &min, &max)) {
fintek_8250_exit_key(addr[i]);
continue;
}
- for (k = 0; k < 4; k++) {
+ for (k = min; k < max; k++) {
u16 aux;
- outb(LDN, addr[i] + ADDR_PORT);
- outb(k, addr[i] + DATA_PORT);
-
- outb(IO_ADDR1, addr[i] + ADDR_PORT);
- aux = inb(addr[i] + DATA_PORT);
- outb(IO_ADDR2, addr[i] + ADDR_PORT);
- aux |= inb(addr[i] + DATA_PORT) << 8;
+ sio_write_reg(pdata, LDN, k);
+ aux = sio_read_reg(pdata, IO_ADDR1);
+ aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
if (aux != io_address)
continue;
- fintek_8250_exit_key(addr[i]);
- pdata->key = keys[j];
- pdata->base_port = addr[i];
pdata->index = k;
+ irq_data = irq_get_irq_data(irq);
+ if (irq_data)
+ level_mode =
+ irqd_is_level_type(irq_data);
+
+ fintek_8250_set_irq_mode(pdata, level_mode);
+ fintek_8250_set_max_fifo(pdata);
+ fintek_8250_exit_key(addr[i]);
+
return 0;
}
@@ -183,39 +308,29 @@ static int find_base_port(struct fintek_8250 *pdata, u16 io_address)
return -ENODEV;
}
-static int fintek_8250_set_irq_mode(struct fintek_8250 *pdata, bool level_mode)
+static void fintek_8250_set_rs485_handler(struct uart_8250_port *uart)
{
- int status;
- u8 tmp;
-
- status = fintek_8250_enter_key(pdata->base_port, pdata->key);
- if (status)
- return status;
-
- outb(LDN, pdata->base_port + ADDR_PORT);
- outb(pdata->index, pdata->base_port + DATA_PORT);
-
- outb(FINTEK_IRQ_MODE, pdata->base_port + ADDR_PORT);
- tmp = inb(pdata->base_port + DATA_PORT);
-
- tmp &= ~IRQ_MODE_MASK;
- tmp |= IRQ_SHARE;
- if (!level_mode)
- tmp |= IRQ_EDGE_HIGH;
-
- outb(tmp, pdata->base_port + DATA_PORT);
- fintek_8250_exit_key(pdata->base_port);
- return 0;
+ struct fintek_8250 *pdata = uart->port.private_data;
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81216AD:
+ case CHIP_ID_F81216H:
+ case CHIP_ID_F81866:
+ case CHIP_ID_F81865:
+ uart->port.rs485_config = fintek_8250_rs485_config;
+ break;
+
+ default: /* No RS485 Auto direction functional */
+ break;
+ }
}
int fintek_8250_probe(struct uart_8250_port *uart)
{
struct fintek_8250 *pdata;
struct fintek_8250 probe_data;
- struct irq_data *irq_data = irq_get_irq_data(uart->port.irq);
- bool level_mode = irqd_is_level_type(irq_data);
- if (find_base_port(&probe_data, uart->port.iobase))
+ if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
return -ENODEV;
pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
@@ -223,8 +338,8 @@ int fintek_8250_probe(struct uart_8250_port *uart)
return -ENOMEM;
memcpy(pdata, &probe_data, sizeof(probe_data));
- uart->port.rs485_config = fintek_8250_rs485_config;
uart->port.private_data = pdata;
+ fintek_8250_set_rs485_handler(uart);
- return fintek_8250_set_irq_mode(pdata, level_mode);
+ return 0;
}
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index b9923464599f..f607946fd996 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -174,7 +174,7 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
int ret;
chip->dev = &pdev->dev;
- chip->irq = pdev->irq;
+ chip->irq = pci_irq_vector(pdev, 0);
chip->regs = pci_ioremap_bar(pdev, 1);
chip->pdata = &qrk_serial_dma_pdata;
@@ -183,6 +183,9 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
if (ret)
return;
+ pci_set_master(pdev);
+ pci_try_set_mwi(pdev);
+
/* Special DMA address for UART */
dma->rx_dma_addr = 0xfffff000;
dma->tx_dma_addr = 0xfffff000;
@@ -280,8 +283,6 @@ static int lpss8250_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (ret)
return ret;
- pci_set_master(pdev);
-
lpss = devm_kzalloc(&pdev->dev, sizeof(*lpss), GFP_KERNEL);
if (!lpss)
return -ENOMEM;
diff --git a/drivers/tty/serial/8250/8250_mid.c b/drivers/tty/serial/8250/8250_mid.c
index 39c2324484dd..ac013edf4992 100644
--- a/drivers/tty/serial/8250/8250_mid.c
+++ b/drivers/tty/serial/8250/8250_mid.c
@@ -303,10 +303,10 @@ static void mid8250_remove(struct pci_dev *pdev)
{
struct mid8250 *mid = pci_get_drvdata(pdev);
+ serial8250_unregister_port(mid->line);
+
if (mid->board->exit)
mid->board->exit(mid);
-
- serial8250_unregister_port(mid->line);
}
static const struct mid8250_board pnw_board = {
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 7a8b5fc81a19..d25ab1cd4295 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -332,8 +332,6 @@ static const struct of_device_id of_platform_serial_table[] = {
.data = (void *)PORT_ALTR_16550_F128, },
{ .compatible = "mrvl,mmp-uart",
.data = (void *)PORT_XSCALE, },
- { .compatible = "mrvl,pxa-uart",
- .data = (void *)PORT_XSCALE, },
{ /* end of list */ },
};
MODULE_DEVICE_TABLE(of, of_platform_serial_table);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index b98c1578f45a..aa0166b6d450 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -52,6 +52,7 @@ struct serial_private {
struct pci_dev *dev;
unsigned int nr;
struct pci_serial_quirk *quirk;
+ const struct pciserial_board *board;
int line[0];
};
@@ -1329,6 +1330,30 @@ static int pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_pericom_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ if (idx==3)
+ offset = 0x38;
+
+ maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+ (board->reg_shift + 3);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2096,6 +2121,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
/*
+ * Pericom (Only 7954 - It have a offset jump for port 4)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PERICOM,
+ .device = PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ /*
* PLX
*/
{
@@ -3862,6 +3897,7 @@ pciserial_init_ports(struct pci_dev *dev, const struct pciserial_board *board)
}
}
priv->nr = i;
+ priv->board = board;
return priv;
err_deinit:
@@ -3872,7 +3908,7 @@ err_out:
}
EXPORT_SYMBOL_GPL(pciserial_init_ports);
-void pciserial_remove_ports(struct serial_private *priv)
+void pciserial_detach_ports(struct serial_private *priv)
{
struct pci_serial_quirk *quirk;
int i;
@@ -3886,7 +3922,11 @@ void pciserial_remove_ports(struct serial_private *priv)
quirk = find_quirk(priv->dev);
if (quirk->exit)
quirk->exit(priv->dev);
+}
+void pciserial_remove_ports(struct serial_private *priv)
+{
+ pciserial_detach_ports(priv);
kfree(priv);
}
EXPORT_SYMBOL_GPL(pciserial_remove_ports);
@@ -5577,7 +5617,7 @@ static pci_ers_result_t serial8250_io_error_detected(struct pci_dev *dev,
return PCI_ERS_RESULT_DISCONNECT;
if (priv)
- pciserial_suspend_ports(priv);
+ pciserial_detach_ports(priv);
pci_disable_device(dev);
@@ -5602,9 +5642,18 @@ static pci_ers_result_t serial8250_io_slot_reset(struct pci_dev *dev)
static void serial8250_io_resume(struct pci_dev *dev)
{
struct serial_private *priv = pci_get_drvdata(dev);
+ const struct pciserial_board *board;
- if (priv)
- pciserial_resume_ports(priv);
+ if (!priv)
+ return;
+
+ board = priv->board;
+ kfree(priv);
+ priv = pciserial_init_ports(dev, board);
+
+ if (!IS_ERR(priv)) {
+ pci_set_drvdata(dev, priv);
+ }
}
static const struct pci_error_handlers serial8250_err_handler = {
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1731b98d2471..fe4399b41df6 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -636,7 +636,7 @@ EXPORT_SYMBOL_GPL(serial8250_em485_destroy);
* once and disable_runtime_pm_tx() will still disable RPM because the fifo is
* empty and the HW can idle again.
*/
-static void serial8250_rpm_get_tx(struct uart_8250_port *p)
+void serial8250_rpm_get_tx(struct uart_8250_port *p)
{
unsigned char rpm_active;
@@ -648,8 +648,9 @@ static void serial8250_rpm_get_tx(struct uart_8250_port *p)
return;
pm_runtime_get_sync(p->port.dev);
}
+EXPORT_SYMBOL_GPL(serial8250_rpm_get_tx);
-static void serial8250_rpm_put_tx(struct uart_8250_port *p)
+void serial8250_rpm_put_tx(struct uart_8250_port *p)
{
unsigned char rpm_active;
@@ -662,6 +663,7 @@ static void serial8250_rpm_put_tx(struct uart_8250_port *p)
pm_runtime_mark_last_busy(p->port.dev);
pm_runtime_put_autosuspend(p->port.dev);
}
+EXPORT_SYMBOL_GPL(serial8250_rpm_put_tx);
/*
* IER sleep support. UARTs which have EFRs need the "extended
@@ -2691,8 +2693,7 @@ serial8250_set_termios(struct uart_port *port, struct ktermios *termios,
serial8250_do_set_termios(port, termios, old);
}
-static void
-serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
+void serial8250_do_set_ldisc(struct uart_port *port, struct ktermios *termios)
{
if (termios->c_line == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
@@ -2708,7 +2709,16 @@ serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
}
}
}
+EXPORT_SYMBOL_GPL(serial8250_do_set_ldisc);
+static void
+serial8250_set_ldisc(struct uart_port *port, struct ktermios *termios)
+{
+ if (port->set_ldisc)
+ port->set_ldisc(port, termios);
+ else
+ serial8250_do_set_ldisc(port, termios);
+}
void serial8250_do_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
new file mode 100644
index 000000000000..4d68731af534
--- /dev/null
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -0,0 +1,190 @@
+/*
+ * drivers/tty/serial/8250/8250_pxa.c -- driver for PXA on-board UARTS
+ * Copyright: (C) 2013 Sergei Ianovich <ynvich@gmail.com>
+ *
+ * replaces drivers/serial/pxa.c by Nicolas Pitre
+ * Created: Feb 20, 2003
+ * Copyright: (C) 2003 Monta Vista Software, Inc.
+ *
+ * Based on drivers/serial/8250.c by Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/pm_runtime.h>
+
+#include "8250.h"
+
+struct pxa8250_data {
+ int line;
+ struct clk *clk;
+};
+
+static int __maybe_unused serial_pxa_suspend(struct device *dev)
+{
+ struct pxa8250_data *data = dev_get_drvdata(dev);
+
+ serial8250_suspend_port(data->line);
+
+ return 0;
+}
+
+static int __maybe_unused serial_pxa_resume(struct device *dev)
+{
+ struct pxa8250_data *data = dev_get_drvdata(dev);
+
+ serial8250_resume_port(data->line);
+
+ return 0;
+}
+
+static const struct dev_pm_ops serial_pxa_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(serial_pxa_suspend, serial_pxa_resume)
+};
+
+static const struct of_device_id serial_pxa_dt_ids[] = {
+ { .compatible = "mrvl,pxa-uart", },
+ { .compatible = "mrvl,mmp-uart", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, serial_pxa_dt_ids);
+
+/* Uart divisor latch write */
+static void serial_pxa_dl_write(struct uart_8250_port *up, int value)
+{
+ unsigned int dll;
+
+ serial_out(up, UART_DLL, value & 0xff);
+ /*
+ * work around Erratum #74 according to Marvel(R) PXA270M Processor
+ * Specification Update (April 19, 2010)
+ */
+ dll = serial_in(up, UART_DLL);
+ WARN_ON(dll != (value & 0xff));
+
+ serial_out(up, UART_DLM, value >> 8 & 0xff);
+}
+
+
+static void serial_pxa_pm(struct uart_port *port, unsigned int state,
+ unsigned int oldstate)
+{
+ struct pxa8250_data *data = port->private_data;
+
+ if (!state)
+ clk_prepare_enable(data->clk);
+ else
+ clk_disable_unprepare(data->clk);
+}
+
+static int serial_pxa_probe(struct platform_device *pdev)
+{
+ struct uart_8250_port uart = {};
+ struct pxa8250_data *data;
+ struct resource *mmres, *irqres;
+ int ret;
+
+ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irqres = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!mmres || !irqres)
+ return -ENODEV;
+
+ data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->clk))
+ return PTR_ERR(data->clk);
+
+ ret = clk_prepare(data->clk);
+ if (ret)
+ return ret;
+
+ uart.port.type = PORT_XSCALE;
+ uart.port.iotype = UPIO_MEM32;
+ uart.port.mapbase = mmres->start;
+ uart.port.regshift = 2;
+ uart.port.irq = irqres->start;
+ uart.port.fifosize = 64;
+ uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST;
+ uart.port.dev = &pdev->dev;
+ uart.port.uartclk = clk_get_rate(data->clk);
+ uart.port.pm = serial_pxa_pm;
+ uart.port.private_data = data;
+ uart.dl_write = serial_pxa_dl_write;
+
+ ret = serial8250_register_8250_port(&uart);
+ if (ret < 0)
+ goto err_clk;
+
+ data->line = ret;
+
+ platform_set_drvdata(pdev, data);
+
+ return 0;
+
+ err_clk:
+ clk_unprepare(data->clk);
+ return ret;
+}
+
+static int serial_pxa_remove(struct platform_device *pdev)
+{
+ struct pxa8250_data *data = platform_get_drvdata(pdev);
+
+ serial8250_unregister_port(data->line);
+
+ clk_unprepare(data->clk);
+
+ return 0;
+}
+
+static struct platform_driver serial_pxa_driver = {
+ .probe = serial_pxa_probe,
+ .remove = serial_pxa_remove,
+
+ .driver = {
+ .name = "pxa2xx-uart",
+ .pm = &serial_pxa_pm_ops,
+ .of_match_table = serial_pxa_dt_ids,
+ },
+};
+
+module_platform_driver(serial_pxa_driver);
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init early_serial_pxa_setup(struct earlycon_device *device,
+ const char *options)
+{
+ struct uart_port *port = &device->port;
+
+ if (!(device->port.membase || device->port.iobase))
+ return -ENODEV;
+
+ port->regshift = 2;
+ return early_serial8250_setup(device, NULL);
+}
+OF_EARLYCON_DECLARE(early_pxa, "mrvl,pxa-uart", early_serial_pxa_setup);
+#endif
+
+MODULE_AUTHOR("Sergei Ianovich");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pxa2xx-uart");
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 417d9e7038e1..746680ebf90c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -24,10 +24,22 @@
/* Most (but not all) of UniPhier UART devices have 64-depth FIFO. */
#define UNIPHIER_UART_DEFAULT_FIFO_SIZE 64
-#define UNIPHIER_UART_CHAR_FCR 3 /* Character / FIFO Control Register */
-#define UNIPHIER_UART_LCR_MCR 4 /* Line/Modem Control Register */
-#define UNIPHIER_UART_LCR_SHIFT 8
-#define UNIPHIER_UART_DLR 9 /* Divisor Latch Register */
+/*
+ * This hardware is similar to 8250, but its register map is a bit different:
+ * - MMIO32 (regshift = 2)
+ * - FCR is not at 2, but 3
+ * - LCR and MCR are not at 3 and 4, they share 4
+ * - Divisor latch at 9, no divisor latch access bit
+ */
+
+#define UNIPHIER_UART_REGSHIFT 2
+
+/* bit[15:8] = CHAR (not used), bit[7:0] = FCR */
+#define UNIPHIER_UART_CHAR_FCR (3 << (UNIPHIER_UART_REGSHIFT))
+/* bit[15:8] = LCR, bit[7:0] = MCR */
+#define UNIPHIER_UART_LCR_MCR (4 << (UNIPHIER_UART_REGSHIFT))
+/* Divisor Latch Register */
+#define UNIPHIER_UART_DLR (9 << (UNIPHIER_UART_REGSHIFT))
struct uniphier8250_priv {
int line;
@@ -44,7 +56,7 @@ static int __init uniphier_early_console_setup(struct earlycon_device *device,
/* This hardware always expects MMIO32 register interface. */
device->port.iotype = UPIO_MEM32;
- device->port.regshift = 2;
+ device->port.regshift = UNIPHIER_UART_REGSHIFT;
/*
* Do not touch the divisor register in early_serial8250_setup();
@@ -68,17 +80,16 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
switch (offset) {
case UART_LCR:
- valshift = UNIPHIER_UART_LCR_SHIFT;
+ valshift = 8;
/* fall through */
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
break;
default:
+ offset <<= UNIPHIER_UART_REGSHIFT;
break;
}
- offset <<= p->regshift;
-
/*
* The return value must be masked with 0xff because LCR and MCR reside
* in the same register that must be accessed by 32-bit write/read.
@@ -90,27 +101,26 @@ static unsigned int uniphier_serial_in(struct uart_port *p, int offset)
static void uniphier_serial_out(struct uart_port *p, int offset, int value)
{
unsigned int valshift = 0;
- bool normal = false;
+ bool normal = true;
switch (offset) {
case UART_FCR:
offset = UNIPHIER_UART_CHAR_FCR;
break;
case UART_LCR:
- valshift = UNIPHIER_UART_LCR_SHIFT;
+ valshift = 8;
/* Divisor latch access bit does not exist. */
value &= ~UART_LCR_DLAB;
/* fall through */
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
+ normal = false;
break;
default:
- normal = true;
+ offset <<= UNIPHIER_UART_REGSHIFT;
break;
}
- offset <<= p->regshift;
-
if (normal) {
writel(value, p->membase + offset);
} else {
@@ -139,16 +149,12 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
*/
static int uniphier_serial_dl_read(struct uart_8250_port *up)
{
- int offset = UNIPHIER_UART_DLR << up->port.regshift;
-
- return readl(up->port.membase + offset);
+ return readl(up->port.membase + UNIPHIER_UART_DLR);
}
static void uniphier_serial_dl_write(struct uart_8250_port *up, int value)
{
- int offset = UNIPHIER_UART_DLR << up->port.regshift;
-
- writel(value, up->port.membase + offset);
+ writel(value, up->port.membase + UNIPHIER_UART_DLR);
}
static int uniphier_of_serial_setup(struct device *dev, struct uart_port *port,
@@ -234,7 +240,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
up.port.type = PORT_16550A;
up.port.iotype = UPIO_MEM32;
- up.port.regshift = 2;
+ up.port.regshift = UNIPHIER_UART_REGSHIFT;
up.port.flags = UPF_FIXED_PORT | UPF_FIXED_TYPE;
up.capabilities = UART_CAP_FIFO;
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index 899834776b36..0b8b6740ba43 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -439,6 +439,16 @@ config SERIAL_8250_MOXA
This driver can also be built as a module. The module will be called
8250_moxa. If you want to do that, say M here.
+config SERIAL_8250_PXA
+ tristate "PXA serial port support"
+ depends on SERIAL_8250
+ depends on ARCH_PXA || ARCH_MMP
+ help
+ If you have a machine based on an Intel XScale PXA2xx CPU you can
+ enable its onboard serial ports by enabling this option. The option is
+ applicable to both devicetree and legacy boards, and early console is
+ part of its support.
+
config SERIAL_OF_PLATFORM
tristate "Devicetree based probing for 8250 ports"
depends on SERIAL_8250 && OF
diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile
index 276c6fb60337..850e721877a9 100644
--- a/drivers/tty/serial/8250/Makefile
+++ b/drivers/tty/serial/8250/Makefile
@@ -31,6 +31,7 @@ obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o
obj-$(CONFIG_SERIAL_8250_LPSS) += 8250_lpss.o
obj-$(CONFIG_SERIAL_8250_MID) += 8250_mid.o
obj-$(CONFIG_SERIAL_8250_MOXA) += 8250_moxa.o
+obj-$(CONFIG_SERIAL_8250_PXA) += 8250_pxa.o
obj-$(CONFIG_SERIAL_OF_PLATFORM) += 8250_of.o
CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 25c1d7bc0100..e9cf5b67f1b7 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -438,17 +438,27 @@ config SERIAL_MPSC_CONSOLE
Say Y here if you want to support a serial console on a Marvell MPSC.
config SERIAL_PXA
- bool "PXA serial port support"
+ bool "PXA serial port support (DEPRECATED)"
depends on ARCH_PXA || ARCH_MMP
select SERIAL_CORE
+ select SERIAL_8250_PXA if SERIAL_8250=y
+ select SERIAL_PXA_NON8250 if !SERIAL_8250=y
help
If you have a machine based on an Intel XScale PXA2xx CPU you
can enable its onboard serial ports by enabling this option.
+ Unless you have a specific need, you should use SERIAL_8250_PXA
+ instead of this.
+
+config SERIAL_PXA_NON8250
+ bool
+ depends on !SERIAL_8250
+
config SERIAL_PXA_CONSOLE
- bool "Console on PXA serial port"
+ bool "Console on PXA serial port (DEPRECATED)"
depends on SERIAL_PXA
select SERIAL_CORE_CONSOLE
+ select SERIAL_8250_CONSOLE if SERIAL_8250=y
help
If you have enabled the serial port on the Intel XScale PXA
CPU you can make it the console by answering Y to this option.
@@ -460,6 +470,9 @@ config SERIAL_PXA_CONSOLE
your boot loader (lilo or loadlin) about how to pass options to the
kernel at boot time.)
+ Unless you have a specific need, you should use SERIAL_8250_PXA
+ and SERIAL_8250_CONSOLE instead of this.
+
config SERIAL_SA1100
bool "SA1100 serial port support"
depends on ARCH_SA1100
@@ -1626,7 +1639,7 @@ config SERIAL_STM32
tristate "STMicroelectronics STM32 serial port support"
select SERIAL_CORE
depends on HAS_DMA
- depends on ARM || COMPILE_TEST
+ depends on ARCH_STM32 || COMPILE_TEST
help
This driver is for the on-chip Serial Controller on
STMicroelectronics STM32 MCUs.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 1278d376da50..2d6288bc4554 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -23,7 +23,7 @@ obj-$(CONFIG_SERIAL_8250) += 8250/
obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o
obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o
obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
-obj-$(CONFIG_SERIAL_PXA) += pxa.o
+obj-$(CONFIG_SERIAL_PXA_NON8250) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
@@ -62,13 +62,11 @@ obj-$(CONFIG_SERIAL_ATMEL) += atmel_serial.o
obj-$(CONFIG_SERIAL_UARTLITE) += uartlite.o
obj-$(CONFIG_SERIAL_MSM) += msm_serial.o
obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
-obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
obj-$(CONFIG_SERIAL_OMAP) += omap-serial.o
obj-$(CONFIG_SERIAL_ALTERA_UART) += altera_uart.o
obj-$(CONFIG_SERIAL_ST_ASC) += st-asc.o
obj-$(CONFIG_SERIAL_TILEGX) += tilegx.o
-obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
obj-$(CONFIG_SERIAL_QE) += ucc_uart.o
obj-$(CONFIG_SERIAL_TIMBERDALE) += timbuart.o
obj-$(CONFIG_SERIAL_GRLIB_GAISLER_APBUART) += apbuart.o
@@ -96,3 +94,6 @@ obj-$(CONFIG_SERIAL_MPS2_UART) += mps2-uart.o
# GPIOLIB helpers for modem control lines
obj-$(CONFIG_SERIAL_MCTRL_GPIO) += serial_mctrl_gpio.o
+
+obj-$(CONFIG_SERIAL_KGDB_NMI) += kgdb_nmi.o
+obj-$(CONFIG_KGDB_SERIAL_CONSOLE) += kgdboc.o
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e2c33b9528d8..d4171d71a258 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2315,12 +2315,67 @@ static int __init pl011_console_setup(struct console *co, char *options)
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
}
+/**
+ * pl011_console_match - non-standard console matching
+ * @co: registering console
+ * @name: name from console command line
+ * @idx: index from console command line
+ * @options: ptr to option string from console command line
+ *
+ * Only attempts to match console command lines of the form:
+ * console=pl011,mmio|mmio32,<addr>[,<options>]
+ * console=pl011,0x<addr>[,<options>]
+ * This form is used to register an initial earlycon boot console and
+ * replace it with the amba_console at pl011 driver init.
+ *
+ * Performs console setup for a match (as required by interface)
+ * If no <options> are specified, then assume the h/w is already setup.
+ *
+ * Returns 0 if console matches; otherwise non-zero to use default matching
+ */
+static int __init pl011_console_match(struct console *co, char *name, int idx,
+ char *options)
+{
+ unsigned char iotype;
+ resource_size_t addr;
+ int i;
+
+ if (strcmp(name, "pl011") != 0)
+ return -ENODEV;
+
+ if (uart_parse_earlycon(options, &iotype, &addr, &options))
+ return -ENODEV;
+
+ if (iotype != UPIO_MEM && iotype != UPIO_MEM32)
+ return -ENODEV;
+
+ /* try to match the port specified on the command line */
+ for (i = 0; i < ARRAY_SIZE(amba_ports); i++) {
+ struct uart_port *port;
+
+ if (!amba_ports[i])
+ continue;
+
+ port = &amba_ports[i]->port;
+
+ if (port->mapbase != addr)
+ continue;
+
+ co->index = i;
+ port->cons = co;
+ return pl011_console_setup(co, options);
+ }
+
+ return -ENODEV;
+}
+
static struct uart_driver amba_reg;
static struct console amba_console = {
.name = "ttyAMA",
.write = pl011_console_write,
.device = uart_console_device,
.setup = pl011_console_setup,
+ .match = pl011_console_match,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &amba_reg,
@@ -2357,6 +2412,7 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
return 0;
}
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
+OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
#else
#define AMBA_CONSOLE NULL
diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c
index 6450a38cb1aa..e92c23470e51 100644
--- a/drivers/tty/serial/crisv10.c
+++ b/drivers/tty/serial/crisv10.c
@@ -3213,8 +3213,6 @@ get_serial_info(struct e100_serial * info,
* should set them to something else than 0.
*/
- if (!retinfo)
- return -EFAULT;
memset(&tmp, 0, sizeof(tmp));
tmp.type = info->type;
tmp.line = info->line;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 76103f2c4a80..a1c6519837a4 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -430,6 +430,65 @@ static void lpuart_flush_buffer(struct uart_port *port)
}
}
+#if defined(CONFIG_CONSOLE_POLL)
+
+static int lpuart_poll_init(struct uart_port *port)
+{
+ struct lpuart_port *sport = container_of(port,
+ struct lpuart_port, port);
+ unsigned long flags;
+ unsigned char temp;
+
+ sport->port.fifosize = 0;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+ /* Disable Rx & Tx */
+ writeb(0, sport->port.membase + UARTCR2);
+
+ temp = readb(sport->port.membase + UARTPFIFO);
+ /* Enable Rx and Tx FIFO */
+ writeb(temp | UARTPFIFO_RXFE | UARTPFIFO_TXFE,
+ sport->port.membase + UARTPFIFO);
+
+ /* flush Tx and Rx FIFO */
+ writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH,
+ sport->port.membase + UARTCFIFO);
+
+ /* explicitly clear RDRF */
+ if (readb(sport->port.membase + UARTSR1) & UARTSR1_RDRF) {
+ readb(sport->port.membase + UARTDR);
+ writeb(UARTSFIFO_RXUF, sport->port.membase + UARTSFIFO);
+ }
+
+ writeb(0, sport->port.membase + UARTTWFIFO);
+ writeb(1, sport->port.membase + UARTRWFIFO);
+
+ /* Enable Rx and Tx */
+ writeb(UARTCR2_RE | UARTCR2_TE, sport->port.membase + UARTCR2);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ return 0;
+}
+
+static void lpuart_poll_put_char(struct uart_port *port, unsigned char c)
+{
+ /* drain */
+ while (!(readb(port->membase + UARTSR1) & UARTSR1_TDRE))
+ barrier();
+
+ writeb(c, port->membase + UARTDR);
+}
+
+static int lpuart_poll_get_char(struct uart_port *port)
+{
+ if (!(readb(port->membase + UARTSR1) & UARTSR1_RDRF))
+ return NO_POLL_CHAR;
+
+ return readb(port->membase + UARTDR);
+}
+
+#endif
+
static inline void lpuart_transmit_buffer(struct lpuart_port *sport)
{
struct circ_buf *xmit = &sport->port.state->xmit;
@@ -1595,6 +1654,11 @@ static const struct uart_ops lpuart_pops = {
.config_port = lpuart_config_port,
.verify_port = lpuart_verify_port,
.flush_buffer = lpuart_flush_buffer,
+#if defined(CONFIG_CONSOLE_POLL)
+ .poll_init = lpuart_poll_init,
+ .poll_get_char = lpuart_poll_get_char,
+ .poll_put_char = lpuart_poll_put_char,
+#endif
};
static const struct uart_ops lpuart32_pops = {
diff --git a/drivers/tty/serial/ifx6x60.c b/drivers/tty/serial/ifx6x60.c
index d386346248de..157883653256 100644
--- a/drivers/tty/serial/ifx6x60.c
+++ b/drivers/tty/serial/ifx6x60.c
@@ -1042,6 +1042,7 @@ static int ifx_spi_spi_probe(struct spi_device *spi)
ret = spi_setup(spi);
if (ret) {
dev_err(&spi->dev, "SPI setup wasn't successful %d", ret);
+ kfree(ifx_dev);
return -ENODEV;
}
diff --git a/drivers/tty/serial/ioc4_serial.c b/drivers/tty/serial/ioc4_serial.c
index e5c42fef69d2..3be051abb2a2 100644
--- a/drivers/tty/serial/ioc4_serial.c
+++ b/drivers/tty/serial/ioc4_serial.c
@@ -1082,7 +1082,7 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
if (!port) {
printk(KERN_WARNING
"IOC4 serial memory not available for port\n");
- return -ENOMEM;
+ goto free;
}
spin_lock_init(&port->ip_lock);
@@ -1190,6 +1190,11 @@ static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
handle_dma_error_intr, port);
}
return 0;
+
+free:
+ while (port_number)
+ kfree(ports[--port_number]);
+ return -ENOMEM;
}
/**
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index 770454e0dfa3..8c1c9112b3fd 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1016,7 +1016,7 @@ static void mxs_auart_settermios(struct uart_port *u,
ctrl |= AUART_LINECTRL_EPS;
}
- u->read_status_mask = 0;
+ u->read_status_mask = AUART_STAT_OERR;
if (termios->c_iflag & INPCK)
u->read_status_mask |= AUART_STAT_PERR;
diff --git a/drivers/tty/serial/pxa.c b/drivers/tty/serial/pxa.c
index cd9d9e878475..75952811c0da 100644
--- a/drivers/tty/serial/pxa.c
+++ b/drivers/tty/serial/pxa.c
@@ -925,6 +925,8 @@ static struct platform_driver serial_pxa_driver = {
},
};
+
+/* 8250 driver for PXA serial ports should be used */
static int __init serial_pxa_init(void)
{
int ret;
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index fb0672554123..793395451982 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1264,7 +1264,7 @@ static int sc16is7xx_probe(struct device *dev,
/* Setup interrupt */
ret = devm_request_irq(dev, irq, sc16is7xx_irq,
- IRQF_ONESHOT | flags, dev_name(dev), s);
+ flags, dev_name(dev), s);
if (!ret)
return 0;
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index f2303f390345..d0847375ea64 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -73,7 +73,7 @@ static inline struct uart_port *uart_port_ref(struct uart_state *state)
static inline void uart_port_deref(struct uart_port *uport)
{
- if (uport && atomic_dec_and_test(&uport->state->refcount))
+ if (atomic_dec_and_test(&uport->state->refcount))
wake_up(&uport->state->remove_wait);
}
@@ -88,9 +88,10 @@ static inline void uart_port_deref(struct uart_port *uport)
#define uart_port_unlock(uport, flags) \
({ \
struct uart_port *__uport = uport; \
- if (__uport) \
+ if (__uport) { \
spin_unlock_irqrestore(&__uport->lock, flags); \
- uart_port_deref(__uport); \
+ uart_port_deref(__uport); \
+ } \
})
static inline struct uart_port *uart_port_check(struct uart_state *state)
@@ -1515,7 +1516,10 @@ static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
unsigned long char_time, expire;
port = uart_port_ref(state);
- if (!port || port->type == PORT_UNKNOWN || port->fifosize == 0) {
+ if (!port)
+ return;
+
+ if (port->type == PORT_UNKNOWN || port->fifosize == 0) {
uart_port_deref(port);
return;
}
@@ -2365,9 +2369,10 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
if (state) {
port = uart_port_ref(state);
- if (port)
+ if (port) {
ret = port->ops->poll_get_char(port);
- uart_port_deref(port);
+ uart_port_deref(port);
+ }
}
return ret;
}
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 4b26252c2885..91e7dddbf72c 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1142,11 +1142,8 @@ static int sci_dma_rx_push(struct sci_port *s, void *buf, size_t count)
int copied;
copied = tty_insert_flip_string(tport, buf, count);
- if (copied < count) {
- dev_warn(port->dev, "Rx overrun: dropping %zu bytes\n",
- count - copied);
+ if (copied < count)
port->icount.buf_overrun++;
- }
port->icount.rx += copied;
@@ -1161,8 +1158,6 @@ static int sci_dma_rx_find_active(struct sci_port *s)
if (s->active_rx == s->cookie_rx[i])
return i;
- dev_err(s->port.dev, "%s: Rx cookie %d not found!\n", __func__,
- s->active_rx);
return -1;
}
@@ -1223,9 +1218,9 @@ static void sci_dma_rx_complete(void *arg)
dma_async_issue_pending(chan);
+ spin_unlock_irqrestore(&port->lock, flags);
dev_dbg(port->dev, "%s: cookie %d #%d, new active cookie %d\n",
__func__, s->cookie_rx[active], active, s->active_rx);
- spin_unlock_irqrestore(&port->lock, flags);
return;
fail:
@@ -1273,8 +1268,6 @@ static void sci_submit_rx(struct sci_port *s)
if (dma_submit_error(s->cookie_rx[i]))
goto fail;
- dev_dbg(s->port.dev, "%s(): cookie %d to #%d\n", __func__,
- s->cookie_rx[i], i);
}
s->active_rx = s->cookie_rx[0];
@@ -1288,7 +1281,6 @@ fail:
for (i = 0; i < 2; i++)
s->cookie_rx[i] = -EINVAL;
s->active_rx = -EINVAL;
- dev_warn(s->port.dev, "Failed to re-start Rx DMA, using PIO\n");
sci_rx_dma_release(s, true);
}
@@ -1358,10 +1350,10 @@ static void rx_timer_fn(unsigned long arg)
int active, count;
u16 scr;
- spin_lock_irqsave(&port->lock, flags);
-
dev_dbg(port->dev, "DMA Rx timed out\n");
+ spin_lock_irqsave(&port->lock, flags);
+
active = sci_dma_rx_find_active(s);
if (active < 0) {
spin_unlock_irqrestore(&port->lock, flags);
@@ -1370,9 +1362,9 @@ static void rx_timer_fn(unsigned long arg)
status = dmaengine_tx_status(s->chan_rx, s->active_rx, &state);
if (status == DMA_COMPLETE) {
+ spin_unlock_irqrestore(&port->lock, flags);
dev_dbg(port->dev, "Cookie %d #%d has already completed\n",
s->active_rx, active);
- spin_unlock_irqrestore(&port->lock, flags);
/* Let packet complete handler take care of the packet */
return;
@@ -1396,8 +1388,6 @@ static void rx_timer_fn(unsigned long arg)
/* Handle incomplete DMA receive */
dmaengine_terminate_all(s->chan_rx);
read = sg_dma_len(&s->sg_rx[active]) - state.residue;
- dev_dbg(port->dev, "Read %u bytes with cookie %d\n", read,
- s->active_rx);
if (read) {
count = sci_dma_rx_push(s, s->rx_buf[active], read);
diff --git a/drivers/tty/serial/sunhv.c b/drivers/tty/serial/sunhv.c
index 4e603d060e80..99ef5c6e4766 100644
--- a/drivers/tty/serial/sunhv.c
+++ b/drivers/tty/serial/sunhv.c
@@ -598,7 +598,8 @@ static int hv_remove(struct platform_device *dev)
uart_remove_one_port(&sunhv_reg, port);
sunserial_unregister_minors(&sunhv_reg, 1);
-
+ kfree(con_read_page);
+ kfree(con_write_page);
kfree(port);
sunhv_port = NULL;
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 9ad98eaa35bf..72df2e1b88af 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1500,6 +1500,7 @@ static int su_probe(struct platform_device *op)
out_unmap:
of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+ kfree(up);
return err;
}
diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c
index 9d7ab7b66a8a..71e81406ef71 100644
--- a/drivers/tty/vt/consolemap.c
+++ b/drivers/tty/vt/consolemap.c
@@ -9,6 +9,17 @@
* Support for multiple unimaps by Jakub Jelinek <jj@ultra.linux.cz>, July 1998
*
* Fix bug in inverse translation. Stanislav Voronyi <stas@cnti.uanet.kharkov.ua>, Dec 1998
+ *
+ * In order to prevent the following circular lock dependency:
+ * &mm->mmap_sem --> cpu_hotplug.lock --> console_lock --> &mm->mmap_sem
+ *
+ * We cannot allow page fault to happen while holding the console_lock.
+ * Therefore, all the userspace copy operations have to be done outside
+ * the console_lock critical sections.
+ *
+ * As all the affected functions are all called directly from vt_ioctl(), we
+ * can allocate some small buffers directly on stack without worrying about
+ * stack overflow.
*/
#include <linux/module.h>
@@ -22,6 +33,7 @@
#include <linux/console.h>
#include <linux/consolemap.h>
#include <linux/vt_kern.h>
+#include <linux/string.h>
static unsigned short translations[][256] = {
/* 8-bit Latin-1 mapped to Unicode -- trivial mapping */
@@ -309,18 +321,19 @@ static void update_user_maps(void)
int con_set_trans_old(unsigned char __user * arg)
{
int i;
- unsigned short *p = translations[USER_MAP];
+ unsigned short inbuf[E_TABSZ];
if (!access_ok(VERIFY_READ, arg, E_TABSZ))
return -EFAULT;
- console_lock();
- for (i=0; i<E_TABSZ ; i++) {
+ for (i = 0; i < E_TABSZ ; i++) {
unsigned char uc;
__get_user(uc, arg+i);
- p[i] = UNI_DIRECT_BASE | uc;
+ inbuf[i] = UNI_DIRECT_BASE | uc;
}
+ console_lock();
+ memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
update_user_maps();
console_unlock();
return 0;
@@ -330,35 +343,37 @@ int con_get_trans_old(unsigned char __user * arg)
{
int i, ch;
unsigned short *p = translations[USER_MAP];
+ unsigned char outbuf[E_TABSZ];
if (!access_ok(VERIFY_WRITE, arg, E_TABSZ))
return -EFAULT;
console_lock();
- for (i=0; i<E_TABSZ ; i++)
+ for (i = 0; i < E_TABSZ ; i++)
{
ch = conv_uni_to_pc(vc_cons[fg_console].d, p[i]);
- __put_user((ch & ~0xff) ? 0 : ch, arg+i);
+ outbuf[i] = (ch & ~0xff) ? 0 : ch;
}
console_unlock();
+
+ for (i = 0; i < E_TABSZ ; i++)
+ __put_user(outbuf[i], arg+i);
return 0;
}
int con_set_trans_new(ushort __user * arg)
{
int i;
- unsigned short *p = translations[USER_MAP];
+ unsigned short inbuf[E_TABSZ];
if (!access_ok(VERIFY_READ, arg, E_TABSZ*sizeof(unsigned short)))
return -EFAULT;
- console_lock();
- for (i=0; i<E_TABSZ ; i++) {
- unsigned short us;
- __get_user(us, arg+i);
- p[i] = us;
- }
+ for (i = 0; i < E_TABSZ ; i++)
+ __get_user(inbuf[i], arg+i);
+ console_lock();
+ memcpy(translations[USER_MAP], inbuf, sizeof(inbuf));
update_user_maps();
console_unlock();
return 0;
@@ -367,16 +382,17 @@ int con_set_trans_new(ushort __user * arg)
int con_get_trans_new(ushort __user * arg)
{
int i;
- unsigned short *p = translations[USER_MAP];
+ unsigned short outbuf[E_TABSZ];
if (!access_ok(VERIFY_WRITE, arg, E_TABSZ*sizeof(unsigned short)))
return -EFAULT;
console_lock();
- for (i=0; i<E_TABSZ ; i++)
- __put_user(p[i], arg+i);
+ memcpy(outbuf, translations[USER_MAP], sizeof(outbuf));
console_unlock();
-
+
+ for (i = 0; i < E_TABSZ ; i++)
+ __put_user(outbuf[i], arg+i);
return 0;
}
@@ -536,10 +552,20 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
{
int err = 0, err1, i;
struct uni_pagedir *p, *q;
+ struct unipair *unilist, *plist;
if (!ct)
return 0;
+ unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
+ if (!unilist)
+ return -ENOMEM;
+
+ for (i = ct, plist = unilist; i; i--, plist++, list++) {
+ __get_user(plist->unicode, &list->unicode);
+ __get_user(plist->fontpos, &list->fontpos);
+ }
+
console_lock();
/* Save original vc_unipagdir_loc in case we allocate a new one */
@@ -557,8 +583,8 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
err1 = con_do_clear_unimap(vc);
if (err1) {
- console_unlock();
- return err1;
+ err = err1;
+ goto out_unlock;
}
/*
@@ -592,8 +618,8 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
*vc->vc_uni_pagedir_loc = p;
con_release_unimap(q);
kfree(q);
- console_unlock();
- return err1;
+ err = err1;
+ goto out_unlock;
}
}
} else {
@@ -617,22 +643,17 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
/*
* Insert user specified unicode pairs into new table.
*/
- while (ct--) {
- unsigned short unicode, fontpos;
- __get_user(unicode, &list->unicode);
- __get_user(fontpos, &list->fontpos);
- if ((err1 = con_insert_unipair(p, unicode,fontpos)) != 0)
+ for (plist = unilist; ct; ct--, plist++) {
+ err1 = con_insert_unipair(p, plist->unicode, plist->fontpos);
+ if (err1)
err = err1;
- list++;
}
/*
* Merge with fontmaps of any other virtual consoles.
*/
- if (con_unify_unimap(vc, p)) {
- console_unlock();
- return err;
- }
+ if (con_unify_unimap(vc, p))
+ goto out_unlock;
for (i = 0; i <= 3; i++)
set_inverse_transl(vc, p, i); /* Update inverse translations */
@@ -640,6 +661,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list)
out_unlock:
console_unlock();
+ kfree(unilist);
return err;
}
@@ -735,9 +757,15 @@ EXPORT_SYMBOL(con_copy_unimap);
*/
int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct unipair __user *list)
{
- int i, j, k, ect;
+ int i, j, k;
+ ushort ect;
u16 **p1, *p2;
struct uni_pagedir *p;
+ struct unipair *unilist, *plist;
+
+ unilist = kmalloc_array(ct, sizeof(struct unipair), GFP_KERNEL);
+ if (!unilist)
+ return -ENOMEM;
console_lock();
@@ -750,21 +778,26 @@ int con_get_unimap(struct vc_data *vc, ushort ct, ushort __user *uct, struct uni
for (j = 0; j < 32; j++) {
p2 = *(p1++);
if (p2)
- for (k = 0; k < 64; k++) {
- if (*p2 < MAX_GLYPH && ect++ < ct) {
- __put_user((u_short)((i<<11)+(j<<6)+k),
- &list->unicode);
- __put_user((u_short) *p2,
- &list->fontpos);
- list++;
+ for (k = 0; k < 64; k++, p2++) {
+ if (*p2 >= MAX_GLYPH)
+ continue;
+ if (ect < ct) {
+ unilist[ect].unicode =
+ (i<<11)+(j<<6)+k;
+ unilist[ect].fontpos = *p2;
}
- p2++;
+ ect++;
}
}
}
}
- __put_user(ect, uct);
console_unlock();
+ for (i = min(ect, ct), plist = unilist; i; i--, list++, plist++) {
+ __put_user(plist->unicode, &list->unicode);
+ __put_user(plist->fontpos, &list->fontpos);
+ }
+ __put_user(ect, uct);
+ kfree(unilist);
return ((ect <= ct) ? 0 : -ENOMEM);
}
diff --git a/drivers/tty/vt/keyboard.c b/drivers/tty/vt/keyboard.c
index 0f8caae4267d..3dd6a491cdba 100644
--- a/drivers/tty/vt/keyboard.c
+++ b/drivers/tty/vt/keyboard.c
@@ -982,7 +982,7 @@ static void kbd_led_trigger_activate(struct led_classdev *cdev)
KBD_LED_TRIGGER((_led_bit) + 8, _name)
static struct kbd_led_trigger kbd_led_triggers[] = {
- KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrollock"),
+ KBD_LED_TRIGGER(VC_SCROLLOCK, "kbd-scrolllock"),
KBD_LED_TRIGGER(VC_NUMLOCK, "kbd-numlock"),
KBD_LED_TRIGGER(VC_CAPSLOCK, "kbd-capslock"),
KBD_LED_TRIGGER(VC_KANALOCK, "kbd-kanalock"),
@@ -1256,7 +1256,7 @@ static int emulate_raw(struct vc_data *vc, unsigned int keycode,
case KEY_SYSRQ:
/*
* Real AT keyboards (that's what we're trying
- * to emulate here emit 0xe0 0x2a 0xe0 0x37 when
+ * to emulate here) emit 0xe0 0x2a 0xe0 0x37 when
* pressing PrtSc/SysRq alone, but simply 0x54
* when pressing Alt+PrtSc/SysRq.
*/
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 8c3bf3d613c0..623264445100 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -315,38 +315,27 @@ void schedule_console_callback(void)
schedule_work(&console_work);
}
-static void scrup(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
+static void con_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int nr)
{
- unsigned short *d, *s;
+ u16 *clear, *d, *s;
- if (t+nr >= b)
+ if (t + nr >= b)
nr = b - t - 1;
if (b > vc->vc_rows || t >= b || nr < 1)
return;
- if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, SM_UP, nr))
+ if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, dir, nr))
return;
- d = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
- s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * (t + nr));
- scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(d + (b - t - nr) * vc->vc_cols, vc->vc_video_erase_char,
- vc->vc_size_row * nr);
-}
-static void scrdown(struct vc_data *vc, unsigned int t, unsigned int b, int nr)
-{
- unsigned short *s;
- unsigned int step;
+ s = clear = (u16 *)(vc->vc_origin + vc->vc_size_row * t);
+ d = (u16 *)(vc->vc_origin + vc->vc_size_row * (t + nr));
- if (t+nr >= b)
- nr = b - t - 1;
- if (b > vc->vc_rows || t >= b || nr < 1)
- return;
- if (con_is_visible(vc) && vc->vc_sw->con_scroll(vc, t, b, SM_DOWN, nr))
- return;
- s = (unsigned short *)(vc->vc_origin + vc->vc_size_row * t);
- step = vc->vc_cols * nr;
- scr_memmovew(s + step, s, (b - t - nr) * vc->vc_size_row);
- scr_memsetw(s, vc->vc_video_erase_char, 2 * step);
+ if (dir == SM_UP) {
+ clear = s + (b - t - nr) * vc->vc_cols;
+ swap(s, d);
+ }
+ scr_memmovew(d, s, (b - t - nr) * vc->vc_size_row);
+ scr_memsetw(clear, vc->vc_video_erase_char, vc->vc_size_row * nr);
}
static void do_update_region(struct vc_data *vc, unsigned long start, int count)
@@ -1120,7 +1109,7 @@ static void lf(struct vc_data *vc)
* if below scrolling region
*/
if (vc->vc_y + 1 == vc->vc_bottom)
- scrup(vc, vc->vc_top, vc->vc_bottom, 1);
+ con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_UP, 1);
else if (vc->vc_y < vc->vc_rows - 1) {
vc->vc_y++;
vc->vc_pos += vc->vc_size_row;
@@ -1135,7 +1124,7 @@ static void ri(struct vc_data *vc)
* if above scrolling region
*/
if (vc->vc_y == vc->vc_top)
- scrdown(vc, vc->vc_top, vc->vc_bottom, 1);
+ con_scroll(vc, vc->vc_top, vc->vc_bottom, SM_DOWN, 1);
else if (vc->vc_y > 0) {
vc->vc_y--;
vc->vc_pos -= vc->vc_size_row;
@@ -1631,7 +1620,7 @@ static void csi_L(struct vc_data *vc, unsigned int nr)
nr = vc->vc_rows - vc->vc_y;
else if (!nr)
nr = 1;
- scrdown(vc, vc->vc_y, vc->vc_bottom, nr);
+ con_scroll(vc, vc->vc_y, vc->vc_bottom, SM_DOWN, nr);
vc->vc_need_wrap = 0;
}
@@ -1652,7 +1641,7 @@ static void csi_M(struct vc_data *vc, unsigned int nr)
nr = vc->vc_rows - vc->vc_y;
else if (!nr)
nr=1;
- scrup(vc, vc->vc_y, vc->vc_bottom, nr);
+ con_scroll(vc, vc->vc_y, vc->vc_bottom, SM_UP, nr);
vc->vc_need_wrap = 0;
}
@@ -4295,6 +4284,46 @@ void vcs_scr_updated(struct vc_data *vc)
notify_update(vc);
}
+void vc_scrolldelta_helper(struct vc_data *c, int lines,
+ unsigned int rolled_over, void *base, unsigned int size)
+{
+ unsigned long ubase = (unsigned long)base;
+ ptrdiff_t scr_end = (void *)c->vc_scr_end - base;
+ ptrdiff_t vorigin = (void *)c->vc_visible_origin - base;
+ ptrdiff_t origin = (void *)c->vc_origin - base;
+ int margin = c->vc_size_row * 4;
+ int from, wrap, from_off, avail;
+
+ /* Turn scrollback off */
+ if (!lines) {
+ c->vc_visible_origin = c->vc_origin;
+ return;
+ }
+
+ /* Do we have already enough to allow jumping from 0 to the end? */
+ if (rolled_over > scr_end + margin) {
+ from = scr_end;
+ wrap = rolled_over + c->vc_size_row;
+ } else {
+ from = 0;
+ wrap = size;
+ }
+
+ from_off = (vorigin - from + wrap) % wrap + lines * c->vc_size_row;
+ avail = (origin - from + wrap) % wrap;
+
+ /* Only a little piece would be left? Show all incl. the piece! */
+ if (avail < 2 * margin)
+ margin = 0;
+ if (from_off < margin)
+ from_off = 0;
+ if (from_off > avail - margin)
+ from_off = avail;
+
+ c->vc_visible_origin = ubase + (from + from_off) % wrap;
+}
+EXPORT_SYMBOL_GPL(vc_scrolldelta_helper);
+
/*
* Visible symbols for modules
*/
diff --git a/drivers/usb/misc/sisusbvga/sisusb_con.c b/drivers/usb/misc/sisusbvga/sisusb_con.c
index 460cebf322e3..4b5777ec1501 100644
--- a/drivers/usb/misc/sisusbvga/sisusb_con.c
+++ b/drivers/usb/misc/sisusbvga/sisusb_con.c
@@ -686,8 +686,6 @@ static void
sisusbcon_scrolldelta(struct vc_data *c, int lines)
{
struct sisusb_usb_data *sisusb;
- int margin = c->vc_size_row * 4;
- int ul, we, p, st;
sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
if (!sisusb)
@@ -700,39 +698,8 @@ sisusbcon_scrolldelta(struct vc_data *c, int lines)
return;
}
- if (!lines) /* Turn scrollback off */
- c->vc_visible_origin = c->vc_origin;
- else {
-
- if (sisusb->con_rolled_over >
- (c->vc_scr_end - sisusb->scrbuf) + margin) {
-
- ul = c->vc_scr_end - sisusb->scrbuf;
- we = sisusb->con_rolled_over + c->vc_size_row;
-
- } else {
-
- ul = 0;
- we = sisusb->scrbuf_size;
-
- }
-
- p = (c->vc_visible_origin - sisusb->scrbuf - ul + we) % we +
- lines * c->vc_size_row;
-
- st = (c->vc_origin - sisusb->scrbuf - ul + we) % we;
-
- if (st < 2 * margin)
- margin = 0;
-
- if (p < margin)
- p = 0;
-
- if (p > st - margin)
- p = st;
-
- c->vc_visible_origin = sisusb->scrbuf + (p + ul) % we;
- }
+ vc_scrolldelta_helper(c, lines, sisusb->con_rolled_over,
+ (void *)sisusb->scrbuf, sisusb->scrbuf_size);
sisusbcon_set_start_address(sisusb, c);
@@ -808,9 +775,10 @@ sisusbcon_cursor(struct vc_data *c, int mode)
mutex_unlock(&sisusb->lock);
}
-static int
+static bool
sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
- int t, int b, int dir, int lines)
+ unsigned int t, unsigned int b, enum con_scroll dir,
+ unsigned int lines)
{
int cols = sisusb->sisusb_num_columns;
int length = ((b - t) * cols) * 2;
@@ -852,8 +820,9 @@ sisusbcon_scroll_area(struct vc_data *c, struct sisusb_usb_data *sisusb,
}
/* Interface routine */
-static int
-sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+static bool
+sisusbcon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int lines)
{
struct sisusb_usb_data *sisusb;
u16 eattr = c->vc_video_erase_char;
@@ -870,17 +839,17 @@ sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
*/
if (!lines)
- return 1;
+ return true;
sisusb = sisusb_get_sisusb_lock_and_check(c->vc_num);
if (!sisusb)
- return 0;
+ return false;
/* sisusb->lock is down */
if (sisusb_is_inactive(c, sisusb)) {
mutex_unlock(&sisusb->lock);
- return 0;
+ return false;
}
/* Special case */
@@ -971,7 +940,7 @@ sisusbcon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
mutex_unlock(&sisusb->lock);
- return 1;
+ return true;
}
/* Interface routine */
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index b87f5cfdaea5..a44f5627b82a 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -164,8 +164,6 @@ static void fbcon_putcs(struct vc_data *vc, const unsigned short *s,
int count, int ypos, int xpos);
static void fbcon_clear_margins(struct vc_data *vc, int bottom_only);
static void fbcon_cursor(struct vc_data *vc, int mode);
-static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
- int count);
static void fbcon_bmove(struct vc_data *vc, int sy, int sx, int dy, int dx,
int height, int width);
static int fbcon_switch(struct vc_data *vc);
@@ -1795,15 +1793,15 @@ static inline void fbcon_softback_note(struct vc_data *vc, int t,
softback_curr = softback_in;
}
-static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
- int count)
+static bool fbcon_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int count)
{
struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
struct display *p = &fb_display[vc->vc_num];
int scroll_partial = info->flags & FBINFO_PARTIAL_PAN_OK;
if (fbcon_is_inactive(vc, info))
- return -EINVAL;
+ return true;
fbcon_cursor(vc, CM_ERASE);
@@ -1831,7 +1829,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
(b - count)),
vc->vc_video_erase_char,
vc->vc_size_row * count);
- return 1;
+ return true;
break;
case SCROLL_WRAP_MOVE:
@@ -1903,7 +1901,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
(b - count)),
vc->vc_video_erase_char,
vc->vc_size_row * count);
- return 1;
+ return true;
}
break;
@@ -1922,7 +1920,7 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
t),
vc->vc_video_erase_char,
vc->vc_size_row * count);
- return 1;
+ return true;
break;
case SCROLL_WRAP_MOVE:
@@ -1992,10 +1990,10 @@ static int fbcon_scroll(struct vc_data *vc, int t, int b, int dir,
t),
vc->vc_video_erase_char,
vc->vc_size_row * count);
- return 1;
+ return true;
}
}
- return 0;
+ return false;
}
diff --git a/drivers/video/console/mdacon.c b/drivers/video/console/mdacon.c
index bacbb044d77c..ec192a1bf297 100644
--- a/drivers/video/console/mdacon.c
+++ b/drivers/video/console/mdacon.c
@@ -488,12 +488,13 @@ static void mdacon_cursor(struct vc_data *c, int mode)
}
}
-static int mdacon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
+static bool mdacon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int lines)
{
u16 eattr = mda_convert_attr(c->vc_video_erase_char);
if (!lines)
- return 0;
+ return false;
if (lines > c->vc_rows) /* maximum realistic size */
lines = c->vc_rows;
@@ -514,7 +515,7 @@ static int mdacon_scroll(struct vc_data *c, int t, int b, int dir, int lines)
break;
}
- return 0;
+ return false;
}
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index e3b9521e4ec3..1e11614322fe 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -574,8 +574,8 @@ static int newport_font_set(struct vc_data *vc, struct console_font *font, unsig
return newport_set_font(vc->vc_num, font);
}
-static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
- int lines)
+static bool newport_scroll(struct vc_data *vc, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int lines)
{
int count, x, y;
unsigned short *s, *d;
@@ -595,7 +595,7 @@ static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
(vc->vc_color & 0xf0) >> 4);
}
npregs->cset.topscan = (topscan - 1) & 0x3ff;
- return 0;
+ return false;
}
count = (b - t - lines) * vc->vc_cols;
@@ -670,7 +670,7 @@ static int newport_scroll(struct vc_data *vc, int t, int b, int dir,
}
}
}
- return 1;
+ return true;
}
static int newport_dummy(struct vc_data *c)
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 3a10ac19598f..79c9bd8d3025 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -153,12 +153,13 @@ static void sticon_cursor(struct vc_data *conp, int mode)
}
}
-static int sticon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
+static bool sticon_scroll(struct vc_data *conp, unsigned int t,
+ unsigned int b, enum con_scroll dir, unsigned int count)
{
struct sti_struct *sti = sticon_sti;
if (vga_is_gfx)
- return 0;
+ return false;
sticon_cursor(conp, CM_ERASE);
@@ -174,7 +175,7 @@ static int sticon_scroll(struct vc_data *conp, int t, int b, int dir, int count)
break;
}
- return 0;
+ return false;
}
static void sticon_init(struct vc_data *c, int init)
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index 11576611a974..c22a56232b7c 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -60,15 +60,6 @@ static struct vgastate vgastate;
#define BLANK 0x0020
-#define CAN_LOAD_EGA_FONTS /* undefine if the user must not do this */
-#define CAN_LOAD_PALETTE /* undefine if the user must not do this */
-
-/* You really do _NOT_ want to define this, unless you have buggy
- * Trident VGA which will resize cursor when moving it between column
- * 15 & 16. If you define this and your VGA is OK, inverse bug will
- * appear.
- */
-#undef TRIDENT_GLITCH
#define VGA_FONTWIDTH 8 /* VGA does not support fontwidths != 8 */
/*
* Interface used by the world
@@ -83,14 +74,12 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch);
static void vgacon_scrolldelta(struct vc_data *c, int lines);
static int vgacon_set_origin(struct vc_data *c);
static void vgacon_save_screen(struct vc_data *c);
-static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
- int lines);
static void vgacon_invert_region(struct vc_data *c, u16 * p, int count);
static struct uni_pagedir *vgacon_uni_pagedir;
static int vgacon_refcount;
/* Description of the hardware situation */
-static int vga_init_done __read_mostly;
+static bool vga_init_done;
static unsigned long vga_vram_base __read_mostly; /* Base of video memory */
static unsigned long vga_vram_end __read_mostly; /* End of video memory */
static unsigned int vga_vram_size __read_mostly; /* Size of video memory */
@@ -98,31 +87,31 @@ static u16 vga_video_port_reg __read_mostly; /* Video register select port */
static u16 vga_video_port_val __read_mostly; /* Video register value port */
static unsigned int vga_video_num_columns; /* Number of text columns */
static unsigned int vga_video_num_lines; /* Number of text lines */
-static int vga_can_do_color __read_mostly; /* Do we support colors? */
+static bool vga_can_do_color; /* Do we support colors? */
static unsigned int vga_default_font_height __read_mostly; /* Height of default screen font */
static unsigned char vga_video_type __read_mostly; /* Card type */
-static unsigned char vga_hardscroll_enabled __read_mostly;
-static unsigned char vga_hardscroll_user_enable __read_mostly = 1;
-static unsigned char vga_font_is_default = 1;
+static bool vga_font_is_default = true;
static int vga_vesa_blanked;
-static int vga_palette_blanked;
-static int vga_is_gfx;
-static int vga_512_chars;
+static bool vga_palette_blanked;
+static bool vga_is_gfx;
+static bool vga_512_chars;
static int vga_video_font_height;
static int vga_scan_lines __read_mostly;
static unsigned int vga_rolled_over;
-static int vgacon_text_mode_force;
+static bool vgacon_text_mode_force;
+static bool vga_hardscroll_enabled;
+static bool vga_hardscroll_user_enable = true;
bool vgacon_text_force(void)
{
- return vgacon_text_mode_force ? true : false;
+ return vgacon_text_mode_force;
}
EXPORT_SYMBOL(vgacon_text_force);
static int __init text_mode(char *str)
{
- vgacon_text_mode_force = 1;
+ vgacon_text_mode_force = true;
return 1;
}
@@ -136,7 +125,7 @@ static int __init no_scroll(char *str)
* Braille reader made by F.H. Papenmeier (Germany).
* Use the "no-scroll" bootflag.
*/
- vga_hardscroll_user_enable = vga_hardscroll_enabled = 0;
+ vga_hardscroll_user_enable = vga_hardscroll_enabled = false;
return 1;
}
@@ -159,18 +148,10 @@ static inline void write_vga(unsigned char reg, unsigned int val)
* handlers, thus the write has to be IRQ-atomic.
*/
raw_spin_lock_irqsave(&vga_lock, flags);
-
-#ifndef SLOW_VGA
v1 = reg + (val & 0xff00);
v2 = reg + 1 + ((val << 8) & 0xff00);
outw(v1, vga_video_port_reg);
outw(v2, vga_video_port_reg);
-#else
- outb_p(reg, vga_video_port_reg);
- outb_p(val >> 8, vga_video_port_val);
- outb_p(reg + 1, vga_video_port_reg);
- outb_p(val & 0xff, vga_video_port_val);
-#endif
raw_spin_unlock_irqrestore(&vga_lock, flags);
}
@@ -334,31 +315,8 @@ static void vgacon_restore_screen(struct vc_data *c)
static void vgacon_scrolldelta(struct vc_data *c, int lines)
{
- if (!lines) /* Turn scrollback off */
- c->vc_visible_origin = c->vc_origin;
- else {
- int margin = c->vc_size_row * 4;
- int ul, we, p, st;
-
- if (vga_rolled_over >
- (c->vc_scr_end - vga_vram_base) + margin) {
- ul = c->vc_scr_end - vga_vram_base;
- we = vga_rolled_over + c->vc_size_row;
- } else {
- ul = 0;
- we = vga_vram_size;
- }
- p = (c->vc_visible_origin - vga_vram_base - ul + we) % we +
- lines * c->vc_size_row;
- st = (c->vc_origin - vga_vram_base - ul + we) % we;
- if (st < 2 * margin)
- margin = 0;
- if (p < margin)
- p = 0;
- if (p > st - margin)
- p = st;
- c->vc_visible_origin = vga_vram_base + (p + ul) % we;
- }
+ vc_scrolldelta_helper(c, lines, vga_rolled_over, (void *)vga_vram_base,
+ vga_vram_size);
vga_set_mem_top(c);
}
#endif /* CONFIG_VGACON_SOFT_SCROLLBACK */
@@ -427,7 +385,7 @@ static const char *vgacon_startup(void)
}
} else {
/* If not, it is color. */
- vga_can_do_color = 1;
+ vga_can_do_color = true;
vga_vram_base = 0xb8000;
vga_video_port_reg = VGA_CRT_IC;
vga_video_port_val = VGA_CRT_DC;
@@ -451,18 +409,6 @@ static const char *vgacon_startup(void)
request_resource(&ioport_resource,
&vga_console_resource);
-#ifdef VGA_CAN_DO_64KB
- /*
- * get 64K rather than 32K of video RAM.
- * This doesn't actually work on all "VGA"
- * controllers (it seems like setting MM=01
- * and COE=1 isn't necessarily a good idea)
- */
- vga_vram_base = 0xa0000;
- vga_vram_size = 0x10000;
- outb_p(6, VGA_GFX_I);
- outb_p(6, VGA_GFX_D);
-#endif
/*
* Normalise the palette registers, to point
* the 16 screen colours to the first 16
@@ -542,7 +488,7 @@ static const char *vgacon_startup(void)
if (!vga_init_done) {
vgacon_scrollback_startup();
- vga_init_done = 1;
+ vga_init_done = true;
}
return display_desc;
@@ -634,7 +580,7 @@ static u8 vgacon_build_attr(struct vc_data *c, u8 color, u8 intensity,
static void vgacon_invert_region(struct vc_data *c, u16 * p, int count)
{
- int col = vga_can_do_color;
+ const bool col = vga_can_do_color;
while (count--) {
u16 a = scr_readw(p);
@@ -652,11 +598,6 @@ static void vgacon_set_cursor_size(int xpos, int from, int to)
unsigned long flags;
int curs, cure;
-#ifdef TRIDENT_GLITCH
- if (xpos < 16)
- from--, to--;
-#endif
-
if ((from == cursor_size_lastfrom) && (to == cursor_size_lastto))
return;
cursor_size_lastfrom = from;
@@ -858,12 +799,10 @@ static void vga_set_palette(struct vc_data *vc, const unsigned char *table)
static void vgacon_set_palette(struct vc_data *vc, const unsigned char *table)
{
-#ifdef CAN_LOAD_PALETTE
if (vga_video_type != VIDEO_TYPE_VGAC || vga_palette_blanked
|| !con_is_visible(vc))
return;
vga_set_palette(vc, table);
-#endif
}
/* structure holding original VGA register settings */
@@ -1006,24 +945,24 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch)
}
if (vga_palette_blanked) {
vga_set_palette(c, color_table);
- vga_palette_blanked = 0;
+ vga_palette_blanked = false;
return 0;
}
- vga_is_gfx = 0;
+ vga_is_gfx = false;
/* Tell console.c that it has to restore the screen itself */
return 1;
case 1: /* Normal blanking */
case -1: /* Obsolete */
if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) {
vga_pal_blank(&vgastate);
- vga_palette_blanked = 1;
+ vga_palette_blanked = true;
return 0;
}
vgacon_set_origin(c);
scr_memsetw((void *) vga_vram_base, BLANK,
c->vc_screenbuf_size);
if (mode_switch)
- vga_is_gfx = 1;
+ vga_is_gfx = true;
return 1;
default: /* VESA blanking */
if (vga_video_type == VIDEO_TYPE_VGAC) {
@@ -1046,15 +985,14 @@ static int vgacon_blank(struct vc_data *c, int blank, int mode_switch)
* (sizif@botik.yaroslavl.su).
*/
-#ifdef CAN_LOAD_EGA_FONTS
-
#define colourmap 0xa0000
/* Pauline Middelink <middelin@polyware.iaf.nl> reports that we
should use 0xA0000 for the bwmap as well.. */
#define blackwmap 0xa0000
#define cmapsz 8192
-static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
+static int vgacon_do_font_op(struct vgastate *state, char *arg, int set,
+ bool ch512)
{
unsigned short video_port_status = vga_video_port_reg + 6;
int font_select = 0x00, beg, i;
@@ -1063,10 +1001,6 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
if (vga_video_type != VIDEO_TYPE_EGAM) {
charmap = (char *) VGA_MAP_MEM(colourmap, 0);
beg = 0x0e;
-#ifdef VGA_CAN_DO_64KB
- if (vga_video_type == VIDEO_TYPE_VGAC)
- beg = 0x06;
-#endif
} else {
charmap = (char *) VGA_MAP_MEM(blackwmap, 0);
beg = 0x0a;
@@ -1080,7 +1014,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
if (!arg)
return -EINVAL; /* Return to default font not supported */
- vga_font_is_default = 0;
+ vga_font_is_default = false;
font_select = ch512 ? 0x04 : 0x00;
#else
/*
@@ -1091,7 +1025,7 @@ static int vgacon_do_font_op(struct vgastate *state,char *arg,int set,int ch512)
if (set) {
vga_font_is_default = !arg;
if (!arg)
- ch512 = 0; /* Default font is always 256 */
+ ch512 = false; /* Default font is always 256 */
font_select = arg ? (ch512 ? 0x0e : 0x0a) : 0x00;
}
@@ -1295,13 +1229,6 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font)
return vgacon_do_font_op(&vgastate, font->data, 0, vga_512_chars);
}
-#else
-
-#define vgacon_font_set NULL
-#define vgacon_font_get NULL
-
-#endif
-
static int vgacon_resize(struct vc_data *c, unsigned int width,
unsigned int height, unsigned int user)
{
@@ -1350,17 +1277,17 @@ static void vgacon_save_screen(struct vc_data *c)
c->vc_screenbuf_size > vga_vram_size ? vga_vram_size : c->vc_screenbuf_size);
}
-static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
- int lines)
+static bool vgacon_scroll(struct vc_data *c, unsigned int t, unsigned int b,
+ enum con_scroll dir, unsigned int lines)
{
unsigned long oldo;
unsigned int delta;
if (t || b != c->vc_rows || vga_is_gfx || c->vc_mode != KD_TEXT)
- return 0;
+ return false;
if (!vga_hardscroll_enabled || lines >= c->vc_rows / 2)
- return 0;
+ return false;
vgacon_restore_screen(c);
oldo = c->vc_origin;
@@ -1396,7 +1323,7 @@ static int vgacon_scroll(struct vc_data *c, int t, int b, int dir,
c->vc_visible_origin = c->vc_origin;
vga_set_mem_top(c);
c->vc_pos = (c->vc_pos - oldo) + c->vc_origin;
- return 1;
+ return true;
}