summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-02-06 22:14:46 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-02-06 22:14:46 -0800
commit46df55ceeaf3d28689242de2dd722857b7ea341f (patch)
treecbb0977d2fbba181464cef3b4dac344c74df6041 /drivers
parentdacd53c80525809cc9ce85e3a4ad409d15209f2a (diff)
parent89140fdaf11aec81e93d5590a993720f2ef0d26e (diff)
Merge tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH: "Here are some USB fixes for 4.5-rc3. The usual, xhci fixes for reported issues, combined with some small gadget driver fixes, and a MAINTAINERS file update. All have been in linux-next with no reported issues" * tag 'usb-4.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: xhci: harden xhci_find_next_ext_cap against device removal xhci: Fix list corruption in urb dequeue at host removal usb: host: xhci-plat: fix NULL pointer in probe for device tree case usb: xhci-mtk: fix AHB bus hang up caused by roothubs polling usb: xhci-mtk: fix bpkts value of LS/HS periodic eps not behind TT usb: xhci: apply XHCI_PME_STUCK_QUIRK to Intel Broxton-M platforms usb: xhci: set SSIC port unused only if xhci_suspend succeeds usb: xhci: add a quirk bit for ssic port unused usb: xhci: handle both SSIC ports in PME stuck quirk usb: dwc3: gadget: set the OTG flag in dwc3 gadget driver. Revert "xhci: don't finish a TD if we get a short-transfer event mid TD" MAINTAINERS: fix my email address usb: dwc2: Fix probe problem on bcm2835 Revert "usb: dwc2: Move reset into dwc2_get_hwparams()" usb: musb: ux500: Fix NULL pointer dereference at system PM usb: phy: mxs: declare variable with initialized value usb: phy: msm: fix error handling in probe.
Diffstat (limited to 'drivers')
-rw-r--r--drivers/usb/dwc2/core.c14
-rw-r--r--drivers/usb/dwc2/platform.c8
-rw-r--r--drivers/usb/dwc3/gadget.c1
-rw-r--r--drivers/usb/host/xhci-ext-caps.h4
-rw-r--r--drivers/usb/host/xhci-mtk-sch.c16
-rw-r--r--drivers/usb/host/xhci-mtk.c23
-rw-r--r--drivers/usb/host/xhci-pci.c56
-rw-r--r--drivers/usb/host/xhci-plat.c3
-rw-r--r--drivers/usb/host/xhci-ring.c10
-rw-r--r--drivers/usb/host/xhci.c4
-rw-r--r--drivers/usb/host/xhci.h1
-rw-r--r--drivers/usb/musb/ux500.c7
-rw-r--r--drivers/usb/phy/phy-msm-usb.c37
-rw-r--r--drivers/usb/phy/phy-mxs-usb.c2
14 files changed, 126 insertions, 60 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 39a0fa8a4c0a..e991d55914db 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -572,12 +572,6 @@ static bool dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;
- /*
- * If the force mode bit is already set, don't set it.
- */
- if ((gusbcfg & set) && !(gusbcfg & clear))
- return false;
-
gusbcfg &= ~clear;
gusbcfg |= set;
dwc2_writel(gusbcfg, hsotg->regs + GUSBCFG);
@@ -3278,9 +3272,6 @@ static void dwc2_get_dev_hwparams(struct dwc2_hsotg *hsotg)
/**
* During device initialization, read various hardware configuration
* registers and interpret the contents.
- *
- * This should be called during driver probe. It will perform a core
- * soft reset in order to get the reset values of the parameters.
*/
int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
{
@@ -3288,7 +3279,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
unsigned width;
u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
u32 grxfsiz;
- int retval;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
@@ -3308,10 +3298,6 @@ int dwc2_get_hwparams(struct dwc2_hsotg *hsotg)
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
- retval = dwc2_core_reset(hsotg);
- if (retval)
- return retval;
-
hwcfg1 = dwc2_readl(hsotg->regs + GHWCFG1);
hwcfg2 = dwc2_readl(hsotg->regs + GHWCFG2);
hwcfg3 = dwc2_readl(hsotg->regs + GHWCFG3);
diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index 510f787434b3..690b9fd98b55 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -530,7 +530,13 @@ static int dwc2_driver_probe(struct platform_device *dev)
if (retval)
return retval;
- /* Reset the controller and detect hardware config values */
+ /*
+ * Reset before dwc2_get_hwparams() then it could get power-on real
+ * reset value form registers.
+ */
+ dwc2_core_reset_and_force_dr_mode(hsotg);
+
+ /* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index af023a81a0b0..7d1dd82a95ac 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2789,6 +2789,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
+ dwc->gadget.is_otg = dwc->dr_mode == USB_DR_MODE_OTG;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 04ce6b156b35..e0244fb3903d 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -112,12 +112,16 @@ static inline int xhci_find_next_ext_cap(void __iomem *base, u32 start, int id)
offset = start;
if (!start || start == XHCI_HCC_PARAMS_OFFSET) {
val = readl(base + XHCI_HCC_PARAMS_OFFSET);
+ if (val == ~0)
+ return 0;
offset = XHCI_HCC_EXT_CAPS(val) << 2;
if (!offset)
return 0;
};
do {
val = readl(base + offset);
+ if (val == ~0)
+ return 0;
if (XHCI_EXT_CAPS_ID(val) == id && offset != start)
return offset;
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index c30de7c39f44..73f763c4f5f5 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -275,8 +275,9 @@ static bool need_bw_sch(struct usb_host_endpoint *ep,
return false;
/*
- * for LS & FS periodic endpoints which its device don't attach
- * to TT are also ignored, root-hub will schedule them directly
+ * for LS & FS periodic endpoints which its device is not behind
+ * a TT are also ignored, root-hub will schedule them directly,
+ * but need set @bpkts field of endpoint context to 1.
*/
if (is_fs_or_ls(speed) && !has_tt)
return false;
@@ -339,8 +340,17 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev,
GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc)),
usb_endpoint_dir_in(&ep->desc), ep);
- if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT))
+ if (!need_bw_sch(ep, udev->speed, slot_ctx->tt_info & TT_SLOT)) {
+ /*
+ * set @bpkts to 1 if it is LS or FS periodic endpoint, and its
+ * device does not connected through an external HS hub
+ */
+ if (usb_endpoint_xfer_int(&ep->desc)
+ || usb_endpoint_xfer_isoc(&ep->desc))
+ ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1));
+
return 0;
+ }
bw_index = get_bw_index(xhci, udev, ep);
sch_bw = &sch_array[bw_index];
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
index c9ab6a44c34a..9532f5aef71b 100644
--- a/drivers/usb/host/xhci-mtk.c
+++ b/drivers/usb/host/xhci-mtk.c
@@ -696,9 +696,24 @@ static int xhci_mtk_remove(struct platform_device *dev)
}
#ifdef CONFIG_PM_SLEEP
+/*
+ * if ip sleep fails, and all clocks are disabled, access register will hang
+ * AHB bus, so stop polling roothubs to avoid regs access on bus suspend.
+ * and no need to check whether ip sleep failed or not; this will cause SPM
+ * to wake up system immediately after system suspend complete if ip sleep
+ * fails, it is what we wanted.
+ */
static int xhci_mtk_suspend(struct device *dev)
{
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = mtk->hcd;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+
+ xhci_dbg(xhci, "%s: stop port polling\n", __func__);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
xhci_mtk_host_disable(mtk);
xhci_mtk_phy_power_off(mtk);
@@ -710,11 +725,19 @@ static int xhci_mtk_suspend(struct device *dev)
static int xhci_mtk_resume(struct device *dev)
{
struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
+ struct usb_hcd *hcd = mtk->hcd;
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
usb_wakeup_disable(mtk);
xhci_mtk_clks_enable(mtk);
xhci_mtk_phy_power_on(mtk);
xhci_mtk_host_enable(mtk);
+
+ xhci_dbg(xhci, "%s: restart port polling\n", __func__);
+ set_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ usb_hcd_poll_rh_status(hcd);
+ set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ usb_hcd_poll_rh_status(xhci->shared_hcd);
return 0;
}
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 58c43ed7ff3b..f0640b7a1c42 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -28,7 +28,9 @@
#include "xhci.h"
#include "xhci-trace.h"
-#define PORT2_SSIC_CONFIG_REG2 0x883c
+#define SSIC_PORT_NUM 2
+#define SSIC_PORT_CFG2 0x880c
+#define SSIC_PORT_CFG2_OFFSET 0x30
#define PROG_DONE (1 << 30)
#define SSIC_PORT_UNUSED (1 << 31)
@@ -45,6 +47,7 @@
#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
+#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
static const char hcd_name[] = "xhci_hcd";
@@ -151,9 +154,14 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
+ pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
+ if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
+ pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
+ xhci->quirks |= XHCI_SSIC_PORT_UNUSED;
+ }
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
pdev->device == PCI_DEVICE_ID_EJ168) {
xhci->quirks |= XHCI_RESET_ON_RESUME;
@@ -312,22 +320,20 @@ static void xhci_pci_remove(struct pci_dev *dev)
* SSIC PORT need to be marked as "unused" before putting xHCI
* into D3. After D3 exit, the SSIC port need to be marked as "used".
* Without this change, xHCI might not enter D3 state.
- * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
- * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
*/
-static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
+static void xhci_ssic_port_unused_quirk(struct usb_hcd *hcd, bool suspend)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
u32 val;
void __iomem *reg;
+ int i;
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
-
- reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
+ for (i = 0; i < SSIC_PORT_NUM; i++) {
+ reg = (void __iomem *) xhci->cap_regs +
+ SSIC_PORT_CFG2 +
+ i * SSIC_PORT_CFG2_OFFSET;
- /* Notify SSIC that SSIC profile programming is not done */
+ /* Notify SSIC that SSIC profile programming is not done. */
val = readl(reg) & ~PROG_DONE;
writel(val, reg);
@@ -344,6 +350,17 @@ static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
writel(val, reg);
readl(reg);
}
+}
+
+/*
+ * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
+ * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
+ */
+static void xhci_pme_quirk(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ void __iomem *reg;
+ u32 val;
reg = (void __iomem *) xhci->cap_regs + 0x80a4;
val = readl(reg);
@@ -355,6 +372,7 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ int ret;
/*
* Systems with the TI redriver that loses port status change events
@@ -364,9 +382,16 @@ static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
pdev->no_d3cold = true;
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(hcd, true);
+ xhci_pme_quirk(hcd);
+
+ if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+ xhci_ssic_port_unused_quirk(hcd, true);
- return xhci_suspend(xhci, do_wakeup);
+ ret = xhci_suspend(xhci, do_wakeup);
+ if (ret && (xhci->quirks & XHCI_SSIC_PORT_UNUSED))
+ xhci_ssic_port_unused_quirk(hcd, false);
+
+ return ret;
}
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
@@ -396,8 +421,11 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
usb_enable_intel_xhci_ports(pdev);
+ if (xhci->quirks & XHCI_SSIC_PORT_UNUSED)
+ xhci_ssic_port_unused_quirk(hcd, false);
+
if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
- xhci_pme_quirk(hcd, false);
+ xhci_pme_quirk(hcd);
retval = xhci_resume(xhci, hibernated);
return retval;
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 770b6b088797..d39d6bf1d090 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -184,7 +184,8 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct xhci_plat_priv *priv = hcd_to_xhci_priv(hcd);
/* Just copy data for now */
- *priv = *priv_match;
+ if (priv_match)
+ *priv = *priv_match;
}
if (xhci_plat_type_is(hcd, XHCI_PLAT_TYPE_MARVELL_ARMADA)) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index f1c21c40b4a6..3915657e6078 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2193,10 +2193,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
}
/* Fast path - was this the last TRB in the TD for this URB? */
} else if (event_trb == td->last_trb) {
- if (td->urb_length_set && trb_comp_code == COMP_SHORT_TX)
- return finish_td(xhci, td, event_trb, event, ep,
- status, false);
-
if (EVENT_TRB_LEN(le32_to_cpu(event->transfer_len)) != 0) {
td->urb->actual_length =
td->urb->transfer_buffer_length -
@@ -2248,12 +2244,6 @@ static int process_bulk_intr_td(struct xhci_hcd *xhci, struct xhci_td *td,
td->urb->actual_length +=
TRB_LEN(le32_to_cpu(cur_trb->generic.field[2])) -
EVENT_TRB_LEN(le32_to_cpu(event->transfer_len));
-
- if (trb_comp_code == COMP_SHORT_TX) {
- xhci_dbg(xhci, "mid bulk/intr SP, wait for last TRB event\n");
- td->urb_length_set = true;
- return 0;
- }
}
return finish_td(xhci, td, event_trb, event, ep, status, false);
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 26a44c0e969e..0c8087d3c313 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1554,7 +1554,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"HW died, freeing TD.");
urb_priv = urb->hcpriv;
- for (i = urb_priv->td_cnt; i < urb_priv->length; i++) {
+ for (i = urb_priv->td_cnt;
+ i < urb_priv->length && xhci->devs[urb->dev->slot_id];
+ i++) {
td = urb_priv->td[i];
if (!list_empty(&td->td_list))
list_del_init(&td->td_list);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 9be7348872ba..cc651383ce5a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1631,6 +1631,7 @@ struct xhci_hcd {
#define XHCI_BROKEN_STREAMS (1 << 19)
#define XHCI_PME_STUCK_QUIRK (1 << 20)
#define XHCI_MTK_HOST (1 << 21)
+#define XHCI_SSIC_PORT_UNUSED (1 << 22)
unsigned int num_active_eps;
unsigned int limit_active_eps;
/* There are two roothubs to keep track of bus suspend info for */
diff --git a/drivers/usb/musb/ux500.c b/drivers/usb/musb/ux500.c
index b2685e75a683..3eaa4ba6867d 100644
--- a/drivers/usb/musb/ux500.c
+++ b/drivers/usb/musb/ux500.c
@@ -348,7 +348,9 @@ static int ux500_suspend(struct device *dev)
struct ux500_glue *glue = dev_get_drvdata(dev);
struct musb *musb = glue_to_musb(glue);
- usb_phy_set_suspend(musb->xceiv, 1);
+ if (musb)
+ usb_phy_set_suspend(musb->xceiv, 1);
+
clk_disable_unprepare(glue->clk);
return 0;
@@ -366,7 +368,8 @@ static int ux500_resume(struct device *dev)
return ret;
}
- usb_phy_set_suspend(musb->xceiv, 0);
+ if (musb)
+ usb_phy_set_suspend(musb->xceiv, 0);
return 0;
}
diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c
index 0d19a6d61a71..970a30e155cb 100644
--- a/drivers/usb/phy/phy-msm-usb.c
+++ b/drivers/usb/phy/phy-msm-usb.c
@@ -1599,6 +1599,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg)
&motg->id.nb);
if (ret < 0) {
dev_err(&pdev->dev, "register ID notifier failed\n");
+ extcon_unregister_notifier(motg->vbus.extcon,
+ EXTCON_USB, &motg->vbus.nb);
return ret;
}
@@ -1660,15 +1662,6 @@ static int msm_otg_probe(struct platform_device *pdev)
if (!motg)
return -ENOMEM;
- pdata = dev_get_platdata(&pdev->dev);
- if (!pdata) {
- if (!np)
- return -ENXIO;
- ret = msm_otg_read_dt(pdev, motg);
- if (ret)
- return ret;
- }
-
motg->phy.otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg),
GFP_KERNEL);
if (!motg->phy.otg)
@@ -1710,6 +1703,15 @@ static int msm_otg_probe(struct platform_device *pdev)
if (!motg->regs)
return -ENOMEM;
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ if (!np)
+ return -ENXIO;
+ ret = msm_otg_read_dt(pdev, motg);
+ if (ret)
+ return ret;
+ }
+
/*
* NOTE: The PHYs can be multiplexed between the chipidea controller
* and the dwc3 controller, using a single bit. It is important that
@@ -1717,8 +1719,10 @@ static int msm_otg_probe(struct platform_device *pdev)
*/
if (motg->phy_number) {
phy_select = devm_ioremap_nocache(&pdev->dev, USB2_PHY_SEL, 4);
- if (!phy_select)
- return -ENOMEM;
+ if (!phy_select) {
+ ret = -ENOMEM;
+ goto unregister_extcon;
+ }
/* Enable second PHY with the OTG port */
writel(0x1, phy_select);
}
@@ -1728,7 +1732,8 @@ static int msm_otg_probe(struct platform_device *pdev)
motg->irq = platform_get_irq(pdev, 0);
if (motg->irq < 0) {
dev_err(&pdev->dev, "platform_get_irq failed\n");
- return motg->irq;
+ ret = motg->irq;
+ goto unregister_extcon;
}
regs[0].supply = "vddcx";
@@ -1737,7 +1742,7 @@ static int msm_otg_probe(struct platform_device *pdev)
ret = devm_regulator_bulk_get(motg->phy.dev, ARRAY_SIZE(regs), regs);
if (ret)
- return ret;
+ goto unregister_extcon;
motg->vddcx = regs[0].consumer;
motg->v3p3 = regs[1].consumer;
@@ -1834,6 +1839,12 @@ disable_clks:
clk_disable_unprepare(motg->clk);
if (!IS_ERR(motg->core_clk))
clk_disable_unprepare(motg->core_clk);
+unregister_extcon:
+ extcon_unregister_notifier(motg->id.extcon,
+ EXTCON_USB_HOST, &motg->id.nb);
+ extcon_unregister_notifier(motg->vbus.extcon,
+ EXTCON_USB, &motg->vbus.nb);
+
return ret;
}
diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c
index c2936dc48ca7..00bfea01be65 100644
--- a/drivers/usb/phy/phy-mxs-usb.c
+++ b/drivers/usb/phy/phy-mxs-usb.c
@@ -220,7 +220,7 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
/* Return true if the vbus is there */
static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
{
- unsigned int vbus_value;
+ unsigned int vbus_value = 0;
if (!mxs_phy->regmap_anatop)
return false;