summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-04-10 12:55:20 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2020-04-10 12:55:20 -0700
commit75bdc9293dfd1c1dea297bbc65b37c7f6dcb2bd6 (patch)
tree3dd3f625688f2a473609a2caa5cd1e20f12345ed /drivers
parent6900433e0fbca146d8170bdf876271cdf3053021 (diff)
parent9cc5f232a4b6a0ef6e9b57876d61b88f61bdd7c2 (diff)
Merge tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding: "There's quite a few changes this time around. Most of these are fixes and cleanups, but there's also new chip support for some drivers and a bit of rework" * tag 'pwm/for-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (33 commits) pwm: pca9685: Fix PWM/GPIO inter-operation pwm: Make pwm_apply_state_debug() static pwm: meson: Remove redundant assignment to variable fin_freq pwm: jz4740: Allow selection of PWM channels 0 and 1 pwm: jz4740: Obtain regmap from parent node pwm: jz4740: Improve algorithm of clock calculation pwm: jz4740: Use clocks from TCU driver pwm: sun4i: Remove redundant needs_delay pwm: omap-dmtimer: Implement .apply callback pwm: omap-dmtimer: Do not disable PWM before changing period/duty_cycle pwm: omap-dmtimer: Fix PWM enabling sequence pwm: omap-dmtimer: Update description for PWM OMAP DM timer pwm: omap-dmtimer: Drop unused header file pwm: renesas-tpu: Drop confusing registered message pwm: renesas-tpu: Fix late Runtime PM enablement pwm: rcar: Fix late Runtime PM enablement dt-bindings: pwm: renesas-tpu: Document more R-Car Gen2 support pwm: meson: Fix confusing indentation pwm: pca9685: Use gpio core provided macro GPIO_LINE_DIRECTION_OUT pwm: pca9685: Replace CONFIG_PM with __maybe_unused ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/pwm/Kconfig58
-rw-r--r--drivers/pwm/core.c135
-rw-r--r--drivers/pwm/pwm-bcm2835.c1
-rw-r--r--drivers/pwm/pwm-imx-tpm.c2
-rw-r--r--drivers/pwm/pwm-imx27.c32
-rw-r--r--drivers/pwm/pwm-jz4740.c162
-rw-r--r--drivers/pwm/pwm-meson.c4
-rw-r--r--drivers/pwm/pwm-mxs.c1
-rw-r--r--drivers/pwm/pwm-omap-dmtimer.c219
-rw-r--r--drivers/pwm/pwm-pca9685.c97
-rw-r--r--drivers/pwm/pwm-rcar.c10
-rw-r--r--drivers/pwm/pwm-renesas-tpu.c11
-rw-r--r--drivers/pwm/pwm-sun4i.c13
-rw-r--r--drivers/pwm/pwm-tegra.c6
14 files changed, 518 insertions, 233 deletions
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 30190beeb6e9..eebbc917ac97 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -33,6 +33,15 @@ config PWM_SYSFS
bool
default y if SYSFS
+config PWM_DEBUG
+ bool "PWM lowlevel drivers additional checks and debug messages"
+ depends on DEBUG_KERNEL
+ help
+ This option enables some additional checks to help lowlevel driver
+ authors to get their callbacks implemented correctly.
+ It is expected to introduce some runtime overhead and diagnostic
+ output to the kernel log, so only enable while working on a driver.
+
config PWM_AB8500
tristate "AB8500 PWM support"
depends on AB8500_CORE && ARCH_U8500
@@ -44,7 +53,8 @@ config PWM_AB8500
config PWM_ATMEL
tristate "Atmel PWM support"
- depends on ARCH_AT91 && OF
+ depends on OF
+ depends on ARCH_AT91 || COMPILE_TEST
help
Generic PWM framework driver for Atmel SoC.
@@ -100,7 +110,7 @@ config PWM_BCM_KONA
config PWM_BCM2835
tristate "BCM2835 PWM support"
- depends on ARCH_BCM2835 || ARCH_BRCMSTB
+ depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
help
PWM framework driver for BCM2835 controller (Raspberry Pi)
@@ -109,7 +119,7 @@ config PWM_BCM2835
config PWM_BERLIN
tristate "Marvell Berlin PWM support"
- depends on ARCH_BERLIN
+ depends on ARCH_BERLIN || COMPILE_TEST
help
PWM framework driver for Marvell Berlin SoCs.
@@ -118,7 +128,7 @@ config PWM_BERLIN
config PWM_BRCMSTB
tristate "Broadcom STB PWM support"
- depends on ARCH_BRCMSTB || BMIPS_GENERIC
+ depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
help
Generic PWM framework driver for the Broadcom Set-top-Box
SoCs (BCM7xxx).
@@ -152,7 +162,7 @@ config PWM_CROS_EC
config PWM_EP93XX
tristate "Cirrus Logic EP93xx PWM support"
- depends on ARCH_EP93XX
+ depends on ARCH_EP93XX || COMPILE_TEST
help
Generic PWM framework driver for Cirrus Logic EP93xx.
@@ -195,7 +205,7 @@ config PWM_IMG
config PWM_IMX1
tristate "i.MX1 PWM support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Generic PWM framework driver for i.MX1 and i.MX21
@@ -204,7 +214,7 @@ config PWM_IMX1
config PWM_IMX27
tristate "i.MX27 PWM support"
- depends on ARCH_MXC
+ depends on ARCH_MXC || COMPILE_TEST
help
Generic PWM framework driver for i.MX27 and later i.MX SoCs.
@@ -225,6 +235,8 @@ config PWM_IMX_TPM
config PWM_JZ4740
tristate "Ingenic JZ47xx PWM support"
depends on MACH_INGENIC
+ depends on COMMON_CLK
+ select MFD_SYSCON
help
Generic PWM framework driver for Ingenic JZ47xx based
machines.
@@ -244,7 +256,7 @@ config PWM_LP3943
config PWM_LPC18XX_SCT
tristate "LPC18xx/43xx PWM/SCT support"
- depends on ARCH_LPC18XX
+ depends on ARCH_LPC18XX || COMPILE_TEST
help
Generic PWM framework driver for NXP LPC18xx PWM/SCT which
supports 16 channels.
@@ -256,7 +268,7 @@ config PWM_LPC18XX_SCT
config PWM_LPC32XX
tristate "LPC32XX PWM support"
- depends on ARCH_LPC32XX
+ depends on ARCH_LPC32XX || COMPILE_TEST
help
Generic PWM framework driver for LPC32XX. The LPC32XX SOC has two
PWM controllers.
@@ -289,7 +301,8 @@ config PWM_LPSS_PLATFORM
config PWM_MESON
tristate "Amlogic Meson PWM driver"
- depends on ARCH_MESON
+ depends on ARCH_MESON || COMPILE_TEST
+ depends on COMMON_CLK
help
The platform driver for Amlogic Meson PWM controller.
@@ -318,7 +331,8 @@ config PWM_MEDIATEK
config PWM_MXS
tristate "Freescale MXS PWM support"
- depends on ARCH_MXS && OF
+ depends on OF
+ depends on ARCH_MXS || COMPILE_TEST
select STMP_DEVICE
help
Generic PWM framework driver for Freescale MXS.
@@ -357,7 +371,7 @@ config PWM_PUV3
config PWM_PXA
tristate "PXA PWM support"
- depends on ARCH_PXA
+ depends on ARCH_PXA || COMPILE_TEST
help
Generic PWM framework driver for PXA.
@@ -388,14 +402,14 @@ config PWM_RENESAS_TPU
config PWM_ROCKCHIP
tristate "Rockchip PWM support"
- depends on ARCH_ROCKCHIP
+ depends on ARCH_ROCKCHIP || COMPILE_TEST
help
Generic PWM framework driver for the PWM controller found on
Rockchip SoCs.
config PWM_SAMSUNG
tristate "Samsung PWM support"
- depends on PLAT_SAMSUNG || ARCH_EXYNOS
+ depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
help
Generic PWM framework driver for Samsung.
@@ -415,7 +429,7 @@ config PWM_SIFIVE
config PWM_SPEAR
tristate "STMicroelectronics SPEAr PWM support"
- depends on PLAT_SPEAR
+ depends on PLAT_SPEAR || COMPILE_TEST
depends on OF
help
Generic PWM framework driver for the PWM controller on ST
@@ -437,7 +451,7 @@ config PWM_SPRD
config PWM_STI
tristate "STiH4xx PWM support"
- depends on ARCH_STI
+ depends on ARCH_STI || COMPILE_TEST
depends on OF
help
Generic PWM framework driver for STiH4xx SoCs.
@@ -447,7 +461,7 @@ config PWM_STI
config PWM_STM32
tristate "STMicroelectronics STM32 PWM"
- depends on MFD_STM32_TIMERS
+ depends on MFD_STM32_TIMERS || COMPILE_TEST
help
Generic PWM framework driver for STM32 SoCs.
@@ -483,7 +497,7 @@ config PWM_SUN4I
config PWM_TEGRA
tristate "NVIDIA Tegra PWM support"
- depends on ARCH_TEGRA
+ depends on ARCH_TEGRA || COMPILE_TEST
help
Generic PWM framework driver for the PWFM controller found on NVIDIA
Tegra SoCs.
@@ -493,7 +507,7 @@ config PWM_TEGRA
config PWM_TIECAP
tristate "ECAP PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_KEYSTONE || ARCH_K3 || COMPILE_TEST
help
PWM driver support for the ECAP APWM controller found on TI SOCs
@@ -502,7 +516,7 @@ config PWM_TIECAP
config PWM_TIEHRPWM
tristate "EHRPWM PWM support"
- depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3
+ depends on ARCH_OMAP2PLUS || ARCH_DAVINCI_DA8XX || ARCH_K3 || COMPILE_TEST
help
PWM driver support for the EHRPWM controller found on TI SOCs
@@ -529,7 +543,7 @@ config PWM_TWL_LED
config PWM_VT8500
tristate "vt8500 PWM support"
- depends on ARCH_VT8500
+ depends on ARCH_VT8500 || COMPILE_TEST
help
Generic PWM framework driver for vt8500.
@@ -538,7 +552,7 @@ config PWM_VT8500
config PWM_ZX
tristate "ZTE ZX PWM support"
- depends on ARCH_ZX
+ depends on ARCH_ZX || COMPILE_TEST
help
Generic PWM framework driver for ZTE ZX family SoCs.
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 5a7f6598c05f..9973c442b455 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -120,6 +120,9 @@ static int pwm_device_request(struct pwm_device *pwm, const char *label)
if (pwm->chip->ops->get_state) {
pwm->chip->ops->get_state(pwm->chip, pwm, &pwm->state);
trace_pwm_get(pwm, &pwm->state);
+
+ if (IS_ENABLED(PWM_DEBUG))
+ pwm->last = pwm->state;
}
set_bit(PWMF_REQUESTED, &pwm->flags);
@@ -232,17 +235,28 @@ void *pwm_get_chip_data(struct pwm_device *pwm)
}
EXPORT_SYMBOL_GPL(pwm_get_chip_data);
-static bool pwm_ops_check(const struct pwm_ops *ops)
+static bool pwm_ops_check(const struct pwm_chip *chip)
{
+
+ const struct pwm_ops *ops = chip->ops;
+
/* driver supports legacy, non-atomic operation */
- if (ops->config && ops->enable && ops->disable)
- return true;
+ if (ops->config && ops->enable && ops->disable) {
+ if (IS_ENABLED(CONFIG_PWM_DEBUG))
+ dev_warn(chip->dev,
+ "Driver needs updating to atomic API\n");
- /* driver supports atomic operation */
- if (ops->apply)
return true;
+ }
- return false;
+ if (!ops->apply)
+ return false;
+
+ if (IS_ENABLED(CONFIG_PWM_DEBUG) && !ops->get_state)
+ dev_warn(chip->dev,
+ "Please implement the .get_state() callback\n");
+
+ return true;
}
/**
@@ -266,7 +280,7 @@ int pwmchip_add_with_polarity(struct pwm_chip *chip,
if (!chip || !chip->dev || !chip->ops || !chip->npwm)
return -EINVAL;
- if (!pwm_ops_check(chip->ops))
+ if (!pwm_ops_check(chip))
return -EINVAL;
mutex_lock(&pwm_lock);
@@ -450,6 +464,107 @@ void pwm_free(struct pwm_device *pwm)
}
EXPORT_SYMBOL_GPL(pwm_free);
+static void pwm_apply_state_debug(struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct pwm_state *last = &pwm->last;
+ struct pwm_chip *chip = pwm->chip;
+ struct pwm_state s1, s2;
+ int err;
+
+ if (!IS_ENABLED(CONFIG_PWM_DEBUG))
+ return;
+
+ /* No reasonable diagnosis possible without .get_state() */
+ if (!chip->ops->get_state)
+ return;
+
+ /*
+ * *state was just applied. Read out the hardware state and do some
+ * checks.
+ */
+
+ chip->ops->get_state(chip, pwm, &s1);
+ trace_pwm_get(pwm, &s1);
+
+ /*
+ * The lowlevel driver either ignored .polarity (which is a bug) or as
+ * best effort inverted .polarity and fixed .duty_cycle respectively.
+ * Undo this inversion and fixup for further tests.
+ */
+ if (s1.enabled && s1.polarity != state->polarity) {
+ s2.polarity = state->polarity;
+ s2.duty_cycle = s1.period - s1.duty_cycle;
+ s2.period = s1.period;
+ s2.enabled = s1.enabled;
+ } else {
+ s2 = s1;
+ }
+
+ if (s2.polarity != state->polarity &&
+ state->duty_cycle < state->period)
+ dev_warn(chip->dev, ".apply ignored .polarity\n");
+
+ if (state->enabled &&
+ last->polarity == state->polarity &&
+ last->period > s2.period &&
+ last->period <= state->period)
+ dev_warn(chip->dev,
+ ".apply didn't pick the best available period (requested: %u, applied: %u, possible: %u)\n",
+ state->period, s2.period, last->period);
+
+ if (state->enabled && state->period < s2.period)
+ dev_warn(chip->dev,
+ ".apply is supposed to round down period (requested: %u, applied: %u)\n",
+ state->period, s2.period);
+
+ if (state->enabled &&
+ last->polarity == state->polarity &&
+ last->period == s2.period &&
+ last->duty_cycle > s2.duty_cycle &&
+ last->duty_cycle <= state->duty_cycle)
+ dev_warn(chip->dev,
+ ".apply didn't pick the best available duty cycle (requested: %u/%u, applied: %u/%u, possible: %u/%u)\n",
+ state->duty_cycle, state->period,
+ s2.duty_cycle, s2.period,
+ last->duty_cycle, last->period);
+
+ if (state->enabled && state->duty_cycle < s2.duty_cycle)
+ dev_warn(chip->dev,
+ ".apply is supposed to round down duty_cycle (requested: %u/%u, applied: %u/%u)\n",
+ state->duty_cycle, state->period,
+ s2.duty_cycle, s2.period);
+
+ if (!state->enabled && s2.enabled && s2.duty_cycle > 0)
+ dev_warn(chip->dev,
+ "requested disabled, but yielded enabled with duty > 0");
+
+ /* reapply the state that the driver reported being configured. */
+ err = chip->ops->apply(chip, pwm, &s1);
+ if (err) {
+ *last = s1;
+ dev_err(chip->dev, "failed to reapply current setting\n");
+ return;
+ }
+
+ trace_pwm_apply(pwm, &s1);
+
+ chip->ops->get_state(chip, pwm, last);
+ trace_pwm_get(pwm, last);
+
+ /* reapplication of the current state should give an exact match */
+ if (s1.enabled != last->enabled ||
+ s1.polarity != last->polarity ||
+ (s1.enabled && s1.period != last->period) ||
+ (s1.enabled && s1.duty_cycle != last->duty_cycle)) {
+ dev_err(chip->dev,
+ ".apply is not idempotent (ena=%d pol=%d %u/%u) -> (ena=%d pol=%d %u/%u)\n",
+ s1.enabled, s1.polarity, s1.duty_cycle, s1.period,
+ last->enabled, last->polarity, last->duty_cycle,
+ last->period);
+ }
+}
+
/**
* pwm_apply_state() - atomically apply a new state to a PWM device
* @pwm: PWM device
@@ -480,6 +595,12 @@ int pwm_apply_state(struct pwm_device *pwm, const struct pwm_state *state)
trace_pwm_apply(pwm, state);
pwm->state = *state;
+
+ /*
+ * only do this after pwm->state was applied as some
+ * implementations of .get_state depend on this
+ */
+ pwm_apply_state_debug(pwm, state);
} else {
/*
* FIXME: restore the initial state in case of error.
diff --git a/drivers/pwm/pwm-bcm2835.c b/drivers/pwm/pwm-bcm2835.c
index 91e24f01b54e..d78f86f8e462 100644
--- a/drivers/pwm/pwm-bcm2835.c
+++ b/drivers/pwm/pwm-bcm2835.c
@@ -166,6 +166,7 @@ static int bcm2835_pwm_probe(struct platform_device *pdev)
pc->chip.dev = &pdev->dev;
pc->chip.ops = &bcm2835_pwm_ops;
+ pc->chip.base = -1;
pc->chip.npwm = 2;
pc->chip.of_xlate = of_pwm_xlate_with_flags;
pc->chip.of_pwm_n_cells = 3;
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index 9145f6160649..5f3d7f7e6aef 100644
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -18,10 +18,8 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/io.h>
-#include <linux/log2.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 35a7ac42269c..a6e40d4c485f 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -18,7 +18,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
@@ -96,9 +95,8 @@ struct pwm_imx27_chip {
#define to_pwm_imx27_chip(chip) container_of(chip, struct pwm_imx27_chip, chip)
-static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
+static int pwm_imx27_clk_prepare_enable(struct pwm_imx27_chip *imx)
{
- struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
int ret;
ret = clk_prepare_enable(imx->clk_ipg);
@@ -114,10 +112,8 @@ static int pwm_imx27_clk_prepare_enable(struct pwm_chip *chip)
return 0;
}
-static void pwm_imx27_clk_disable_unprepare(struct pwm_chip *chip)
+static void pwm_imx27_clk_disable_unprepare(struct pwm_imx27_chip *imx)
{
- struct pwm_imx27_chip *imx = to_pwm_imx27_chip(chip);
-
clk_disable_unprepare(imx->clk_per);
clk_disable_unprepare(imx->clk_ipg);
}
@@ -130,7 +126,7 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
u64 tmp;
int ret;
- ret = pwm_imx27_clk_prepare_enable(chip);
+ ret = pwm_imx27_clk_prepare_enable(imx);
if (ret < 0)
return;
@@ -174,8 +170,7 @@ static void pwm_imx27_get_state(struct pwm_chip *chip,
tmp = NSEC_PER_SEC * (u64)(val);
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, pwm_clk);
- if (!state->enabled)
- pwm_imx27_clk_disable_unprepare(chip);
+ pwm_imx27_clk_disable_unprepare(imx);
}
static void pwm_imx27_sw_reset(struct pwm_chip *chip)
@@ -259,7 +254,7 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (cstate.enabled) {
pwm_imx27_wait_fifo_slot(chip, pwm);
} else {
- ret = pwm_imx27_clk_prepare_enable(chip);
+ ret = pwm_imx27_clk_prepare_enable(imx);
if (ret)
return ret;
@@ -289,8 +284,8 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
writel(cr, imx->mmio_base + MX3_PWMCR);
- if (!state->enabled && cstate.enabled)
- pwm_imx27_clk_disable_unprepare(chip);
+ if (!state->enabled)
+ pwm_imx27_clk_disable_unprepare(imx);
return 0;
}
@@ -310,6 +305,8 @@ MODULE_DEVICE_TABLE(of, pwm_imx27_dt_ids);
static int pwm_imx27_probe(struct platform_device *pdev)
{
struct pwm_imx27_chip *imx;
+ int ret;
+ u32 pwmcr;
imx = devm_kzalloc(&pdev->dev, sizeof(*imx), GFP_KERNEL);
if (imx == NULL)
@@ -352,6 +349,15 @@ static int pwm_imx27_probe(struct platform_device *pdev)
if (IS_ERR(imx->mmio_base))
return PTR_ERR(imx->mmio_base);
+ ret = pwm_imx27_clk_prepare_enable(imx);
+ if (ret)
+ return ret;
+
+ /* keep clks on if pwm is running */
+ pwmcr = readl(imx->mmio_base + MX3_PWMCR);
+ if (!(pwmcr & MX3_PWMCR_EN))
+ pwm_imx27_clk_disable_unprepare(imx);
+
return pwmchip_add(&imx->chip);
}
@@ -361,8 +367,6 @@ static int pwm_imx27_remove(struct platform_device *pdev)
imx = platform_get_drvdata(pdev);
- pwm_imx27_clk_disable_unprepare(&imx->chip);
-
return pwmchip_remove(&imx->chip);
}
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 9d78cc21cb12..3cd5c054ad9a 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -13,18 +13,19 @@
#include <linux/err.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
+#include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
-
-#include <asm/mach-jz4740/timer.h>
+#include <linux/regmap.h>
#define NUM_PWM 8
struct jz4740_pwm_chip {
struct pwm_chip chip;
- struct clk *clk;
+ struct regmap *map;
};
static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
@@ -32,82 +33,134 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
return container_of(chip, struct jz4740_pwm_chip, chip);
}
+static bool jz4740_pwm_can_use_chn(struct jz4740_pwm_chip *jz,
+ unsigned int channel)
+{
+ /* Enable all TCU channels for PWM use by default except channels 0/1 */
+ u32 pwm_channels_mask = GENMASK(NUM_PWM - 1, 2);
+
+ device_property_read_u32(jz->chip.dev->parent,
+ "ingenic,pwm-channels-mask",
+ &pwm_channels_mask);
+
+ return !!(pwm_channels_mask & BIT(channel));
+}
+
static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
- /*
- * Timers 0 and 1 are used for system tasks, so they are unavailable
- * for use as PWMs.
- */
- if (pwm->hwpwm < 2)
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
+ struct clk *clk;
+ char name[16];
+ int err;
+
+ if (!jz4740_pwm_can_use_chn(jz, pwm->hwpwm))
return -EBUSY;
- jz4740_timer_start(pwm->hwpwm);
+ snprintf(name, sizeof(name), "timer%u", pwm->hwpwm);
+
+ clk = clk_get(chip->dev, name);
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) != -EPROBE_DEFER)
+ dev_err(chip->dev, "Failed to get clock: %pe", clk);
+
+ return PTR_ERR(clk);
+ }
+
+ err = clk_prepare_enable(clk);
+ if (err < 0) {
+ clk_put(clk);
+ return err;
+ }
+
+ pwm_set_chip_data(pwm, clk);
return 0;
}
static void jz4740_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
- jz4740_timer_set_ctrl(pwm->hwpwm, 0);
+ struct clk *clk = pwm_get_chip_data(pwm);
- jz4740_timer_stop(pwm->hwpwm);
+ clk_disable_unprepare(clk);
+ clk_put(clk);
}
static int jz4740_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->pwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
+
+ /* Enable PWM output */
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, TCU_TCSR_PWM_EN);
- ctrl |= JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
- jz4740_timer_enable(pwm->hwpwm);
+ /* Start counter */
+ regmap_write(jz->map, TCU_REG_TESR, BIT(pwm->hwpwm));
return 0;
}
static void jz4740_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
- uint32_t ctrl = jz4740_timer_get_ctrl(pwm->hwpwm);
+ struct jz4740_pwm_chip *jz = to_jz4740(chip);
/*
* Set duty > period. This trick allows the TCU channels in TCU2 mode to
* properly return to their init level.
*/
- jz4740_timer_set_duty(pwm->hwpwm, 0xffff);
- jz4740_timer_set_period(pwm->hwpwm, 0x0);
+ regmap_write(jz->map, TCU_REG_TDHRc(pwm->hwpwm), 0xffff);
+ regmap_write(jz->map, TCU_REG_TDFRc(pwm->hwpwm), 0x0);
/*
* Disable PWM output.
* In TCU2 mode (channel 1/2 on JZ4750+), this must be done before the
* counter is stopped, while in TCU1 mode the order does not matter.
*/
- ctrl &= ~JZ_TIMER_CTRL_PWM_ENABLE;
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+ regmap_update_bits(jz->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_EN, 0);
/* Stop counter */
- jz4740_timer_disable(pwm->hwpwm);
+ regmap_write(jz->map, TCU_REG_TECR, BIT(pwm->hwpwm));
}
static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
const struct pwm_state *state)
{
struct jz4740_pwm_chip *jz4740 = to_jz4740(pwm->chip);
- unsigned long long tmp;
+ unsigned long long tmp = 0xffffull * NSEC_PER_SEC;
+ struct clk *clk = pwm_get_chip_data(pwm);
unsigned long period, duty;
- unsigned int prescaler = 0;
- uint16_t ctrl;
+ long rate;
+ int err;
- tmp = (unsigned long long)clk_get_rate(jz4740->clk) * state->period;
- do_div(tmp, 1000000000);
- period = tmp;
+ /*
+ * Limit the clock to a maximum rate that still gives us a period value
+ * which fits in 16 bits.
+ */
+ do_div(tmp, state->period);
- while (period > 0xffff && prescaler < 6) {
- period >>= 2;
- ++prescaler;
+ /*
+ * /!\ IMPORTANT NOTE:
+ * -------------------
+ * This code relies on the fact that clk_round_rate() will always round
+ * down, which is not a valid assumption given by the clk API, but only
+ * happens to be true with the clk drivers used for Ingenic SoCs.
+ *
+ * Right now, there is no alternative as the clk API does not have a
+ * round-down function (and won't have one for a while), but if it ever
+ * comes to light, a round-down function should be used instead.
+ */
+ rate = clk_round_rate(clk, tmp);
+ if (rate < 0) {
+ dev_err(chip->dev, "Unable to round rate: %ld", rate);
+ return rate;
}
- if (prescaler == 6)
- return -EINVAL;
+ /* Calculate period value */
+ tmp = (unsigned long long)rate * state->period;
+ do_div(tmp, NSEC_PER_SEC);
+ period = (unsigned long)tmp;
+ /* Calculate duty value */
tmp = (unsigned long long)period * state->duty_cycle;
do_div(tmp, state->period);
duty = period - tmp;
@@ -117,26 +170,38 @@ static int jz4740_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
jz4740_pwm_disable(chip, pwm);
- jz4740_timer_set_count(pwm->hwpwm, 0);
- jz4740_timer_set_duty(pwm->hwpwm, duty);
- jz4740_timer_set_period(pwm->hwpwm, period);
+ err = clk_set_rate(clk, rate);
+ if (err) {
+ dev_err(chip->dev, "Unable to set rate: %d", err);
+ return err;
+ }
+
+ /* Reset counter to 0 */
+ regmap_write(jz4740->map, TCU_REG_TCNTc(pwm->hwpwm), 0);
- ctrl = JZ_TIMER_CTRL_PRESCALER(prescaler) | JZ_TIMER_CTRL_SRC_EXT |
- JZ_TIMER_CTRL_PWM_ABBRUPT_SHUTDOWN;
+ /* Set duty */
+ regmap_write(jz4740->map, TCU_REG_TDHRc(pwm->hwpwm), duty);
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
+ /* Set period */
+ regmap_write(jz4740->map, TCU_REG_TDFRc(pwm->hwpwm), period);
+ /* Set abrupt shutdown */
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_SD, TCU_TCSR_PWM_SD);
+
+ /* Set polarity */
switch (state->polarity) {
case PWM_POLARITY_NORMAL:
- ctrl &= ~JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH, 0);
break;
case PWM_POLARITY_INVERSED:
- ctrl |= JZ_TIMER_CTRL_PWM_ACTIVE_LOW;
+ regmap_update_bits(jz4740->map, TCU_REG_TCSRc(pwm->hwpwm),
+ TCU_TCSR_PWM_INITL_HIGH,
+ TCU_TCSR_PWM_INITL_HIGH);
break;
}
- jz4740_timer_set_ctrl(pwm->hwpwm, ctrl);
-
if (state->enabled)
jz4740_pwm_enable(chip, pwm);
@@ -152,17 +217,20 @@ static const struct pwm_ops jz4740_pwm_ops = {
static int jz4740_pwm_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct jz4740_pwm_chip *jz4740;
- jz4740 = devm_kzalloc(&pdev->dev, sizeof(*jz4740), GFP_KERNEL);
+ jz4740 = devm_kzalloc(dev, sizeof(*jz4740), GFP_KERNEL);
if (!jz4740)
return -ENOMEM;
- jz4740->clk = devm_clk_get(&pdev->dev, "ext");
- if (IS_ERR(jz4740->clk))
- return PTR_ERR(jz4740->clk);
+ jz4740->map = device_node_to_regmap(dev->parent->of_node);
+ if (IS_ERR(jz4740->map)) {
+ dev_err(dev, "regmap not found: %ld\n", PTR_ERR(jz4740->map));
+ return PTR_ERR(jz4740->map);
+ }
- jz4740->chip.dev = &pdev->dev;
+ jz4740->chip.dev = dev;
jz4740->chip.ops = &jz4740_pwm_ops;
jz4740->chip.npwm = NUM_PWM;
jz4740->chip.base = -1;
diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c
index 6245bbdb6e6c..bd0d7336b898 100644
--- a/drivers/pwm/pwm-meson.c
+++ b/drivers/pwm/pwm-meson.c
@@ -136,7 +136,7 @@ static int meson_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
dev_err(dev, "failed to set parent %s for %s: %d\n",
__clk_get_name(channel->clk_parent),
__clk_get_name(channel->clk), err);
- return err;
+ return err;
}
}
@@ -163,7 +163,7 @@ static int meson_pwm_calc(struct meson_pwm *meson, struct pwm_device *pwm,
{
struct meson_pwm_channel *channel = pwm_get_chip_data(pwm);
unsigned int duty, period, pre_div, cnt, duty_cnt;
- unsigned long fin_freq = -1;
+ unsigned long fin_freq;
duty = state->duty_cycle;
period = state->period;
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index f2e57fcf8f8b..7ce616923c52 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -9,7 +9,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/slab.h>
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 9e4378dc6897..0d31833db2e2 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -10,7 +10,27 @@
*
* Description:
* This file is the core OMAP support for the generic, Linux
- * PWM driver / controller, using the OMAP's dual-mode timers.
+ * PWM driver / controller, using the OMAP's dual-mode timers
+ * with a timer counter that goes up. When it overflows it gets
+ * reloaded with the load value and the pwm output goes up.
+ * When counter matches with match register, the output goes down.
+ * Reference Manual: http://www.ti.com/lit/ug/spruh73q/spruh73q.pdf
+ *
+ * Limitations:
+ * - When PWM is stopped, timer counter gets stopped immediately. This
+ * doesn't allow the current PWM period to complete and stops abruptly.
+ * - When PWM is running and changing both duty cycle and period,
+ * we cannot prevent in software that the output might produce
+ * a period with mixed settings. Especially when period/duty_cyle
+ * is updated while the pwm pin is high, current pwm period/duty_cycle
+ * can get updated as below based on the current timer counter:
+ * - period for current cycle = current_period + new period
+ * - duty_cycle for current period = current period + new duty_cycle.
+ * - PWM OMAP DM timer cannot change the polarity when pwm is active. When
+ * user requests a change in polarity when in active state:
+ * - PWM is stopped abruptly(without completing the current cycle)
+ * - Polarity is changed
+ * - A fresh cycle is started.
*/
#include <linux/clk.h>
@@ -20,8 +40,8 @@
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <clocksource/timer-ti-dm.h>
#include <linux/platform_data/dmtimer-omap.h>
-#include <linux/platform_data/pwm_omap_dmtimer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
@@ -31,10 +51,20 @@
#define DM_TIMER_LOAD_MIN 0xfffffffe
#define DM_TIMER_MAX 0xffffffff
+/**
+ * struct pwm_omap_dmtimer_chip - Structure representing a pwm chip
+ * corresponding to omap dmtimer.
+ * @chip: PWM chip structure representing PWM controller
+ * @mutex: Mutex to protect pwm apply state
+ * @dm_timer: Pointer to omap dm timer.
+ * @pdata: Pointer to omap dm timer ops.
+ * dm_timer_pdev: Pointer to omap dm timer platform device
+ */
struct pwm_omap_dmtimer_chip {
struct pwm_chip chip;
+ /* Mutex to protect pwm apply state */
struct mutex mutex;
- pwm_omap_dmtimer *dm_timer;
+ struct omap_dm_timer *dm_timer;
const struct omap_dm_timer_ops *pdata;
struct platform_device *dm_timer_pdev;
};
@@ -45,11 +75,22 @@ to_pwm_omap_dmtimer_chip(struct pwm_chip *chip)
return container_of(chip, struct pwm_omap_dmtimer_chip, chip);
}
+/**
+ * pwm_omap_dmtimer_get_clock_cycles() - Get clock cycles in a time frame
+ * @clk_rate: pwm timer clock rate
+ * @ns: time frame in nano seconds.
+ *
+ * Return number of clock cycles in a given period(ins ns).
+ */
static u32 pwm_omap_dmtimer_get_clock_cycles(unsigned long clk_rate, int ns)
{
return DIV_ROUND_CLOSEST_ULL((u64)clk_rate * ns, NSEC_PER_SEC);
}
+/**
+ * pwm_omap_dmtimer_start() - Start the pwm omap dm timer in pwm mode
+ * @omap: Pointer to pwm omap dm timer chip
+ */
static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
{
/*
@@ -67,28 +108,46 @@ static void pwm_omap_dmtimer_start(struct pwm_omap_dmtimer_chip *omap)
omap->pdata->start(omap->dm_timer);
}
-static int pwm_omap_dmtimer_enable(struct pwm_chip *chip,
- struct pwm_device *pwm)
+/**
+ * pwm_omap_dmtimer_is_enabled() - Detect if the pwm is enabled.
+ * @omap: Pointer to pwm omap dm timer chip
+ *
+ * Return true if pwm is enabled else false.
+ */
+static bool pwm_omap_dmtimer_is_enabled(struct pwm_omap_dmtimer_chip *omap)
{
- struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+ u32 status;
- mutex_lock(&omap->mutex);
- pwm_omap_dmtimer_start(omap);
- mutex_unlock(&omap->mutex);
+ status = omap->pdata->get_pwm_status(omap->dm_timer);
- return 0;
+ return !!(status & OMAP_TIMER_CTRL_ST);
}
-static void pwm_omap_dmtimer_disable(struct pwm_chip *chip,
- struct pwm_device *pwm)
+/**
+ * pwm_omap_dmtimer_polarity() - Detect the polarity of pwm.
+ * @omap: Pointer to pwm omap dm timer chip
+ *
+ * Return the polarity of pwm.
+ */
+static int pwm_omap_dmtimer_polarity(struct pwm_omap_dmtimer_chip *omap)
{
- struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+ u32 status;
- mutex_lock(&omap->mutex);
- omap->pdata->stop(omap->dm_timer);
- mutex_unlock(&omap->mutex);
+ status = omap->pdata->get_pwm_status(omap->dm_timer);
+
+ return !!(status & OMAP_TIMER_CTRL_SCPWM);
}
+/**
+ * pwm_omap_dmtimer_config() - Update the configuration of pwm omap dm timer
+ * @chip: Pointer to PWM controller
+ * @pwm: Pointer to PWM channel
+ * @duty_ns: New duty cycle in nano seconds
+ * @period_ns: New period in nano seconds
+ *
+ * Return 0 if successfully changed the period/duty_cycle else appropriate
+ * error.
+ */
static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
struct pwm_device *pwm,
int duty_ns, int period_ns)
@@ -96,31 +155,26 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
u32 period_cycles, duty_cycles;
u32 load_value, match_value;
- struct clk *fclk;
unsigned long clk_rate;
- bool timer_active;
+ struct clk *fclk;
dev_dbg(chip->dev, "requested duty cycle: %d ns, period: %d ns\n",
duty_ns, period_ns);
- mutex_lock(&omap->mutex);
if (duty_ns == pwm_get_duty_cycle(pwm) &&
- period_ns == pwm_get_period(pwm)) {
- /* No change - don't cause any transients. */
- mutex_unlock(&omap->mutex);
+ period_ns == pwm_get_period(pwm))
return 0;
- }
fclk = omap->pdata->get_fclk(omap->dm_timer);
if (!fclk) {
dev_err(chip->dev, "invalid pmtimer fclk\n");
- goto err_einval;
+ return -EINVAL;
}
clk_rate = clk_get_rate(fclk);
if (!clk_rate) {
dev_err(chip->dev, "invalid pmtimer fclk rate\n");
- goto err_einval;
+ return -EINVAL;
}
dev_dbg(chip->dev, "clk rate: %luHz\n", clk_rate);
@@ -148,7 +202,7 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
dev_info(chip->dev,
"period %d ns too short for clock rate %lu Hz\n",
period_ns, clk_rate);
- goto err_einval;
+ return -EINVAL;
}
if (duty_cycles < 1) {
@@ -174,81 +228,103 @@ static int pwm_omap_dmtimer_config(struct pwm_chip *chip,
load_value = (DM_TIMER_MAX - period_cycles) + 1;
match_value = load_value + duty_cycles - 1;
- /*
- * We MUST stop the associated dual-mode timer before attempting to
- * write its registers, but calls to omap_dm_timer_start/stop must
- * be balanced so check if timer is active before calling timer_stop.
- */
- timer_active = pm_runtime_active(&omap->dm_timer_pdev->dev);
- if (timer_active)
- omap->pdata->stop(omap->dm_timer);
-
omap->pdata->set_load(omap->dm_timer, load_value);
omap->pdata->set_match(omap->dm_timer, true, match_value);
dev_dbg(chip->dev, "load value: %#08x (%d), match value: %#08x (%d)\n",
load_value, load_value, match_value, match_value);
- omap->pdata->set_pwm(omap->dm_timer,
- pwm_get_polarity(pwm) == PWM_POLARITY_INVERSED,
- true,
- PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
- true);
-
- /* If config was called while timer was running it must be reenabled. */
- if (timer_active)
- pwm_omap_dmtimer_start(omap);
+ return 0;
+}
- mutex_unlock(&omap->mutex);
+/**
+ * pwm_omap_dmtimer_set_polarity() - Changes the polarity of the pwm dm timer.
+ * @chip: Pointer to PWM controller
+ * @pwm: Pointer to PWM channel
+ * @polarity: New pwm polarity to be set
+ */
+static void pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+ bool enabled;
- return 0;
+ /* Disable the PWM before changing the polarity. */
+ enabled = pwm_omap_dmtimer_is_enabled(omap);
+ if (enabled)
+ omap->pdata->stop(omap->dm_timer);
-err_einval:
- mutex_unlock(&omap->mutex);
+ omap->pdata->set_pwm(omap->dm_timer,
+ polarity == PWM_POLARITY_INVERSED,
+ true, OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+ true);
- return -EINVAL;
+ if (enabled)
+ pwm_omap_dmtimer_start(omap);
}
-static int pwm_omap_dmtimer_set_polarity(struct pwm_chip *chip,
- struct pwm_device *pwm,
- enum pwm_polarity polarity)
+/**
+ * pwm_omap_dmtimer_apply() - Changes the state of the pwm omap dm timer.
+ * @chip: Pointer to PWM controller
+ * @pwm: Pointer to PWM channel
+ * @state: New state to apply
+ *
+ * Return 0 if successfully changed the state else appropriate error.
+ */
+static int pwm_omap_dmtimer_apply(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ const struct pwm_state *state)
{
struct pwm_omap_dmtimer_chip *omap = to_pwm_omap_dmtimer_chip(chip);
+ int ret = 0;
- /*
- * PWM core will not call set_polarity while PWM is enabled so it's
- * safe to reconfigure the timer here without stopping it first.
- */
mutex_lock(&omap->mutex);
- omap->pdata->set_pwm(omap->dm_timer,
- polarity == PWM_POLARITY_INVERSED,
- true,
- PWM_OMAP_DMTIMER_TRIGGER_OVERFLOW_AND_COMPARE,
- true);
+
+ if (pwm_omap_dmtimer_is_enabled(omap) && !state->enabled) {
+ omap->pdata->stop(omap->dm_timer);
+ goto unlock_mutex;
+ }
+
+ if (pwm_omap_dmtimer_polarity(omap) != state->polarity)
+ pwm_omap_dmtimer_set_polarity(chip, pwm, state->polarity);
+
+ ret = pwm_omap_dmtimer_config(chip, pwm, state->duty_cycle,
+ state->period);
+ if (ret)
+ goto unlock_mutex;
+
+ if (!pwm_omap_dmtimer_is_enabled(omap) && state->enabled) {
+ omap->pdata->set_pwm(omap->dm_timer,
+ state->polarity == PWM_POLARITY_INVERSED,
+ true,
+ OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE,
+ true);
+ pwm_omap_dmtimer_start(omap);
+ }
+
+unlock_mutex:
mutex_unlock(&omap->mutex);
- return 0;
+ return ret;
}
static const struct pwm_ops pwm_omap_dmtimer_ops = {
- .enable = pwm_omap_dmtimer_enable,
- .disable = pwm_omap_dmtimer_disable,
- .config = pwm_omap_dmtimer_config,
- .set_polarity = pwm_omap_dmtimer_set_polarity,
+ .apply = pwm_omap_dmtimer_apply,
.owner = THIS_MODULE,
};
static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
- struct device_node *timer;
- struct platform_device *timer_pdev;
- struct pwm_omap_dmtimer_chip *omap;
struct dmtimer_platform_data *timer_pdata;
const struct omap_dm_timer_ops *pdata;
- pwm_omap_dmtimer *dm_timer;
- u32 v;
+ struct platform_device *timer_pdev;
+ struct pwm_omap_dmtimer_chip *omap;
+ struct omap_dm_timer *dm_timer;
+ struct device_node *timer;
int ret = 0;
+ u32 v;
timer = of_parse_phandle(np, "ti,timers", 0);
if (!timer)
@@ -281,6 +357,7 @@ static int pwm_omap_dmtimer_probe(struct platform_device *pdev)
!pdata->set_load ||
!pdata->set_match ||
!pdata->set_pwm ||
+ !pdata->get_pwm_status ||
!pdata->set_prescaler ||
!pdata->write_counter) {
dev_err(&pdev->dev, "Incomplete dmtimer pdata structure\n");
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index b07bdca3d510..76cd22bd6614 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -20,6 +20,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pm_runtime.h>
+#include <linux/bitmap.h>
/*
* Because the PCA9685 has only one prescaler per chip, changing the period of
@@ -69,11 +70,11 @@
struct pca9685 {
struct pwm_chip chip;
struct regmap *regmap;
- int duty_ns;
int period_ns;
#if IS_ENABLED(CONFIG_GPIOLIB)
struct mutex lock;
struct gpio_chip gpio;
+ DECLARE_BITMAP(pwms_inuse, PCA9685_MAXCHAN + 1);
#endif
};
@@ -83,51 +84,51 @@ static inline struct pca9685 *to_pca(struct pwm_chip *chip)
}
#if IS_ENABLED(CONFIG_GPIOLIB)
-static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
+static bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca, int pwm_idx)
{
- struct pca9685 *pca = gpiochip_get_data(gpio);
- struct pwm_device *pwm;
+ bool is_inuse;
mutex_lock(&pca->lock);
-
- pwm = &pca->chip.pwms[offset];
-
- if (pwm->flags & (PWMF_REQUESTED | PWMF_EXPORTED)) {
- mutex_unlock(&pca->lock);
- return -EBUSY;
+ if (pwm_idx >= PCA9685_MAXCHAN) {
+ /*
+ * "all LEDs" channel:
+ * pretend already in use if any of the PWMs are requested
+ */
+ if (!bitmap_empty(pca->pwms_inuse, PCA9685_MAXCHAN)) {
+ is_inuse = true;
+ goto out;
+ }
+ } else {
+ /*
+ * regular channel:
+ * pretend already in use if the "all LEDs" channel is requested
+ */
+ if (test_bit(PCA9685_MAXCHAN, pca->pwms_inuse)) {
+ is_inuse = true;
+ goto out;
+ }
}
-
- pwm_set_chip_data(pwm, (void *)1);
-
+ is_inuse = test_and_set_bit(pwm_idx, pca->pwms_inuse);
+out:
mutex_unlock(&pca->lock);
- pm_runtime_get_sync(pca->chip.dev);
- return 0;
+ return is_inuse;
}
-static bool pca9685_pwm_is_gpio(struct pca9685 *pca, struct pwm_device *pwm)
+static void pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
{
- bool is_gpio = false;
-
mutex_lock(&pca->lock);
+ clear_bit(pwm_idx, pca->pwms_inuse);
+ mutex_unlock(&pca->lock);
+}
- if (pwm->hwpwm >= PCA9685_MAXCHAN) {
- unsigned int i;
-
- /*
- * Check if any of the GPIOs are requested and in that case
- * prevent using the "all LEDs" channel.
- */
- for (i = 0; i < pca->gpio.ngpio; i++)
- if (gpiochip_is_requested(&pca->gpio, i)) {
- is_gpio = true;
- break;
- }
- } else if (pwm_get_chip_data(pwm)) {
- is_gpio = true;
- }
+static int pca9685_pwm_gpio_request(struct gpio_chip *gpio, unsigned int offset)
+{
+ struct pca9685 *pca = gpiochip_get_data(gpio);
- mutex_unlock(&pca->lock);
- return is_gpio;
+ if (pca9685_pwm_test_and_set_inuse(pca, offset))
+ return -EBUSY;
+ pm_runtime_get_sync(pca->chip.dev);
+ return 0;
}
static int pca9685_pwm_gpio_get(struct gpio_chip *gpio, unsigned int offset)
@@ -162,13 +163,14 @@ static void pca9685_pwm_gpio_free(struct gpio_chip *gpio, unsigned int offset)
pca9685_pwm_gpio_set(gpio, offset, 0);
pm_runtime_put(pca->chip.dev);
+ pca9685_pwm_clear_inuse(pca, offset);
}
static int pca9685_pwm_gpio_get_direction(struct gpio_chip *chip,
unsigned int offset)
{
/* Always out */
- return 0;
+ return GPIO_LINE_DIRECTION_OUT;
}
static int pca9685_pwm_gpio_direction_input(struct gpio_chip *gpio,
@@ -213,12 +215,17 @@ static int pca9685_pwm_gpio_probe(struct pca9685 *pca)
return devm_gpiochip_add_data(dev, &pca->gpio, pca);
}
#else
-static inline bool pca9685_pwm_is_gpio(struct pca9685 *pca,
- struct pwm_device *pwm)
+static inline bool pca9685_pwm_test_and_set_inuse(struct pca9685 *pca,
+ int pwm_idx)
{
return false;
}
+static inline void
+pca9685_pwm_clear_inuse(struct pca9685 *pca, int pwm_idx)
+{
+}
+
static inline int pca9685_pwm_gpio_probe(struct pca9685 *pca)
{
return 0;
@@ -272,8 +279,6 @@ static int pca9685_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
}
}
- pca->duty_ns = duty_ns;
-
if (duty_ns < 1) {
if (pwm->hwpwm >= PCA9685_MAXCHAN)
reg = PCA9685_ALL_LED_OFF_H;
@@ -402,7 +407,7 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct pca9685 *pca = to_pca(chip);
- if (pca9685_pwm_is_gpio(pca, pwm))
+ if (pca9685_pwm_test_and_set_inuse(pca, pwm->hwpwm))
return -EBUSY;
pm_runtime_get_sync(chip->dev);
@@ -411,8 +416,11 @@ static int pca9685_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
static void pca9685_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
+ struct pca9685 *pca = to_pca(chip);
+
pca9685_pwm_disable(chip, pwm);
pm_runtime_put(chip->dev);
+ pca9685_pwm_clear_inuse(pca, pwm->hwpwm);
}
static const struct pwm_ops pca9685_pwm_ops = {
@@ -449,7 +457,6 @@ static int pca9685_pwm_probe(struct i2c_client *client,
ret);
return ret;
}
- pca->duty_ns = 0;
pca->period_ns = PCA9685_DEFAULT_PERIOD;
i2c_set_clientdata(client, pca);
@@ -512,8 +519,7 @@ static int pca9685_pwm_remove(struct i2c_client *client)
return 0;
}
-#ifdef CONFIG_PM
-static int pca9685_pwm_runtime_suspend(struct device *dev)
+static int __maybe_unused pca9685_pwm_runtime_suspend(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pca9685 *pca = i2c_get_clientdata(client);
@@ -522,7 +528,7 @@ static int pca9685_pwm_runtime_suspend(struct device *dev)
return 0;
}
-static int pca9685_pwm_runtime_resume(struct device *dev)
+static int __maybe_unused pca9685_pwm_runtime_resume(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct pca9685 *pca = i2c_get_clientdata(client);
@@ -530,7 +536,6 @@ static int pca9685_pwm_runtime_resume(struct device *dev)
pca9685_set_sleep_mode(pca, false);
return 0;
}
-#endif
static const struct i2c_device_id pca9685_id[] = {
{ "pca9685", 0 },
diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
index 2685577b6dd4..7ab9eb6616d9 100644
--- a/drivers/pwm/pwm-rcar.c
+++ b/drivers/pwm/pwm-rcar.c
@@ -229,24 +229,28 @@ static int rcar_pwm_probe(struct platform_device *pdev)
rcar_pwm->chip.base = -1;
rcar_pwm->chip.npwm = 1;
+ pm_runtime_enable(&pdev->dev);
+
ret = pwmchip_add(&rcar_pwm->chip);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register PWM chip: %d\n", ret);
+ pm_runtime_disable(&pdev->dev);
return ret;
}
- pm_runtime_enable(&pdev->dev);
-
return 0;
}
static int rcar_pwm_remove(struct platform_device *pdev)
{
struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = pwmchip_remove(&rcar_pwm->chip);
pm_runtime_disable(&pdev->dev);
- return pwmchip_remove(&rcar_pwm->chip);
+ return ret;
}
static const struct of_device_id rcar_pwm_of_table[] = {
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index 4a855a21b782..81ad5a551455 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -415,16 +415,15 @@ static int tpu_probe(struct platform_device *pdev)
tpu->chip.base = -1;
tpu->chip.npwm = TPU_CHANNEL_MAX;
+ pm_runtime_enable(&pdev->dev);
+
ret = pwmchip_add(&tpu->chip);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register PWM chip\n");
+ pm_runtime_disable(&pdev->dev);
return ret;
}
- dev_info(&pdev->dev, "TPU PWM %d registered\n", tpu->pdev->id);
-
- pm_runtime_enable(&pdev->dev);
-
return 0;
}
@@ -434,12 +433,10 @@ static int tpu_remove(struct platform_device *pdev)
int ret;
ret = pwmchip_remove(&tpu->chip);
- if (ret)
- return ret;
pm_runtime_disable(&pdev->dev);
- return 0;
+ return ret;
}
#ifdef CONFIG_OF
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index 3e3efa6c768f..5c677c563349 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -90,7 +90,6 @@ struct sun4i_pwm_chip {
spinlock_t ctrl_lock;
const struct sun4i_pwm_data *data;
unsigned long next_period[2];
- bool needs_delay[2];
};
static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
@@ -287,7 +286,6 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
sun4i_pwm->next_period[pwm->hwpwm] = jiffies +
usecs_to_jiffies(cstate.period / 1000 + 1);
- sun4i_pwm->needs_delay[pwm->hwpwm] = true;
if (state->polarity != PWM_POLARITY_NORMAL)
ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
@@ -298,7 +296,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->enabled) {
ctrl |= BIT_CH(PWM_EN, pwm->hwpwm);
- } else if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
+ } else {
ctrl &= ~BIT_CH(PWM_EN, pwm->hwpwm);
ctrl &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm);
}
@@ -310,15 +308,9 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
if (state->enabled)
return 0;
- if (!sun4i_pwm->needs_delay[pwm->hwpwm]) {
- clk_disable_unprepare(sun4i_pwm->clk);
- return 0;
- }
-
/* We need a full period to elapse before disabling the channel. */
now = jiffies;
- if (sun4i_pwm->needs_delay[pwm->hwpwm] &&
- time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
+ if (time_before(now, sun4i_pwm->next_period[pwm->hwpwm])) {
delay_us = jiffies_to_usecs(sun4i_pwm->next_period[pwm->hwpwm] -
now);
if ((delay_us / 500) > MAX_UDELAY_MS)
@@ -326,7 +318,6 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
else
usleep_range(delay_us, delay_us * 2);
}
- sun4i_pwm->needs_delay[pwm->hwpwm] = false;
spin_lock(&sun4i_pwm->ctrl_lock);
ctrl = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG);
diff --git a/drivers/pwm/pwm-tegra.c b/drivers/pwm/pwm-tegra.c
index aa12fb3ed92e..d26ed8f579ff 100644
--- a/drivers/pwm/pwm-tegra.c
+++ b/drivers/pwm/pwm-tegra.c
@@ -282,9 +282,15 @@ static const struct tegra_pwm_soc tegra186_pwm_soc = {
.max_frequency = 102000000UL,
};
+static const struct tegra_pwm_soc tegra194_pwm_soc = {
+ .num_channels = 1,
+ .max_frequency = 408000000UL,
+};
+
static const struct of_device_id tegra_pwm_of_match[] = {
{ .compatible = "nvidia,tegra20-pwm", .data = &tegra20_pwm_soc },
{ .compatible = "nvidia,tegra186-pwm", .data = &tegra186_pwm_soc },
+ { .compatible = "nvidia,tegra194-pwm", .data = &tegra194_pwm_soc },
{ }
};
MODULE_DEVICE_TABLE(of, tegra_pwm_of_match);