diff options
| author | Russell King <rmk+kernel@armlinux.org.uk> | 2020-06-21 14:48:05 +0100 |
|---|---|---|
| committer | Russell King <rmk+kernel@armlinux.org.uk> | 2020-08-03 21:43:31 +0100 |
| commit | 77c215dadb2b2fba0c799c8e83171cd21f04f782 (patch) | |
| tree | cda478da960b08487fc9bc8f1171d099c03a6b99 /drivers | |
| parent | 90168d0733a159d450cea14e3196ba27b39a52b5 (diff) | |
net: mtk_eth_soc: use resolved link config in mac_link_up()
Convert the mtk_eth_soc driver to use the finalised link parameters in
mac_link_up() rather than the parameters in mac_config().
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/ethernet/mediatek/mtk_eth_soc.c | 45 |
1 files changed, 25 insertions, 20 deletions
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index a1c45b39a230..0870fe78ea38 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -353,29 +353,9 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode, /* Setup gmac */ mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); mcr_new = mcr_cur; - mcr_new &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 | - MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC | - MAC_MCR_FORCE_RX_FC); mcr_new |= MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK; - switch (state->speed) { - case SPEED_2500: - case SPEED_1000: - mcr_new |= MAC_MCR_SPEED_1000; - break; - case SPEED_100: - mcr_new |= MAC_MCR_SPEED_100; - break; - } - if (state->duplex == DUPLEX_FULL) { - mcr_new |= MAC_MCR_FORCE_DPX; - if (state->pause & MLO_PAUSE_TX) - mcr_new |= MAC_MCR_FORCE_TX_FC; - if (state->pause & MLO_PAUSE_RX) - mcr_new |= MAC_MCR_FORCE_RX_FC; - } - /* Only update control register when needed! */ if (mcr_new != mcr_cur) mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id)); @@ -452,6 +432,31 @@ static void mtk_mac_link_up(struct phylink_config *config, phylink_config); u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); + mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 | + MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC | + MAC_MCR_FORCE_RX_FC); + + /* Configure speed */ + switch (speed) { + case SPEED_2500: + case SPEED_1000: + mcr |= MAC_MCR_SPEED_1000; + break; + case SPEED_100: + mcr |= MAC_MCR_SPEED_100; + break; + } + + /* Configure duplex */ + if (duplex == DUPLEX_FULL) + mcr |= MAC_MCR_FORCE_DPX; + + /* Configure pause modes - phylink will avoid these for half duplex */ + if (tx_pause) + mcr |= MAC_MCR_FORCE_TX_FC; + if (rx_pause) + mcr |= MAC_MCR_FORCE_RX_FC; + mcr |= MAC_MCR_TX_EN | MAC_MCR_RX_EN; mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); } |