summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 18:19:45 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-11 18:19:45 -0700
commit8efcf34a263965e471e3999904f94d1f6799d42a (patch)
treea1fe88517cb8a4eb54b50c3ce32eaa1954518b9c /drivers
parent32bcbf8b6d09428907fd045a4ea90562ec7dc4a2 (diff)
parent14321604c82c5415a72e894b83b587a345f5bdf2 (diff)
Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC late updates from Olof Johansson: "This is a branch with a few merge requests that either came in late, or took a while longer for us to review and merge than usual and thus cut it a bit close to the merge window. We stage them in a separate branch and if things look good, we still send them up -- and that's the case here. This is mostly DT additions for Renesas platforms, adding IP block descriptions for existing and new SoCs. There are also some driver updates for Qualcomm platforms for SMEM/QMI and GENI, which is their generalized serial protocol interface" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits) soc: qcom: smem: introduce qcom_smem_virt_to_phys() soc: qcom: qmi: fix a buffer sizing bug MAINTAINERS: Update pattern for qcom_scm soc: Unconditionally include qcom Makefile soc: qcom: smem: check sooner in qcom_smem_set_global_partition() soc: qcom: smem: fix qcom_smem_set_global_partition() soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private() soc: qcom: smem: byte swap values properly soc: qcom: smem: return proper type for cached entry functions soc: qcom: smem: fix first cache entry calculation soc: qcom: cmd-db: Make endian-agnostic drivers: qcom: add command DB driver arm64: dts: renesas: salvator-common: Add ADV7482 support ARM: dts: r8a7740: Add CEU1 ARM: dts: r8a7740: Add CEU0 arm64: dts: renesas: salvator-common: enable VIN arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes arm64: dts: renesas: r8a7795-es1: add CSI-2 node ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/firmware/qcom_scm.c3
-rw-r--r--drivers/of/platform.c1
-rw-r--r--drivers/soc/Makefile2
-rw-r--r--drivers/soc/qcom/Kconfig18
-rw-r--r--drivers/soc/qcom/Makefile2
-rw-r--r--drivers/soc/qcom/cmd-db.c317
-rw-r--r--drivers/soc/qcom/qcom-geni-se.c748
-rw-r--r--drivers/soc/qcom/qmi_interface.c5
-rw-r--r--drivers/soc/qcom/smd-rpm.c1
-rw-r--r--drivers/soc/qcom/smem.c77
10 files changed, 1149 insertions, 25 deletions
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5a7d693009ef..e778af766fae 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -603,6 +603,9 @@ static const struct of_device_id qcom_scm_dt_match[] = {
{ .compatible = "qcom,scm-msm8996",
.data = NULL, /* no clocks */
},
+ { .compatible = "qcom,scm-ipq4019",
+ .data = NULL, /* no clocks */
+ },
{ .compatible = "qcom,scm",
.data = (void *)(SCM_HAS_CORE_CLK
| SCM_HAS_IFACE_CLK
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 0b49a62b38a3..59731a950c1f 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -505,6 +505,7 @@ EXPORT_SYMBOL_GPL(of_platform_default_populate);
#ifndef CONFIG_PPC
static const struct of_device_id reserved_mem_matches[] = {
{ .compatible = "qcom,rmtfs-mem" },
+ { .compatible = "qcom,cmd-db" },
{ .compatible = "ramoops" },
{}
};
diff --git a/drivers/soc/Makefile b/drivers/soc/Makefile
index 40523577bdaa..113e884697fd 100644
--- a/drivers/soc/Makefile
+++ b/drivers/soc/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_ARCH_MXC) += imx/
obj-$(CONFIG_SOC_XWAY) += lantiq/
obj-y += mediatek/
obj-$(CONFIG_ARCH_MESON) += amlogic/
-obj-$(CONFIG_ARCH_QCOM) += qcom/
+obj-y += qcom/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_SOC_SAMSUNG) += samsung/
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index d053f2634c67..9dc02f390ba3 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -3,6 +3,24 @@
#
menu "Qualcomm SoC drivers"
+config QCOM_COMMAND_DB
+ bool "Qualcomm Command DB"
+ depends on (ARCH_QCOM && OF) || COMPILE_TEST
+ help
+ Command DB queries shared memory by key string for shared system
+ resources. Platform drivers that require to set state of a shared
+ resource on a RPM-hardened platform must use this database to get
+ SoC specific identifier and information for the shared resources.
+
+config QCOM_GENI_SE
+ tristate "QCOM GENI Serial Engine Driver"
+ depends on ARCH_QCOM || COMPILE_TEST
+ help
+ This driver is used to manage Generic Interface (GENI) firmware based
+ Qualcomm Technologies, Inc. Universal Peripheral (QUP) Wrapper. This
+ driver is also used to manage the common aspects of multiple Serial
+ Engines present in the QUP.
+
config QCOM_GLINK_SSR
tristate "Qualcomm Glink SSR driver"
depends on RPMSG
diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
index 39de5dee55d9..19dcf957cb3a 100644
--- a/drivers/soc/qcom/Makefile
+++ b/drivers/soc/qcom/Makefile
@@ -1,4 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_QCOM_GENI_SE) += qcom-geni-se.o
+obj-$(CONFIG_QCOM_COMMAND_DB) += cmd-db.o
obj-$(CONFIG_QCOM_GLINK_SSR) += glink_ssr.o
obj-$(CONFIG_QCOM_GSBI) += qcom_gsbi.o
obj-$(CONFIG_QCOM_MDT_LOADER) += mdt_loader.o
diff --git a/drivers/soc/qcom/cmd-db.c b/drivers/soc/qcom/cmd-db.c
new file mode 100644
index 000000000000..a6f646295f06
--- /dev/null
+++ b/drivers/soc/qcom/cmd-db.c
@@ -0,0 +1,317 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2016-2018, The Linux Foundation. All rights reserved. */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <soc/qcom/cmd-db.h>
+
+#define NUM_PRIORITY 2
+#define MAX_SLV_ID 8
+#define SLAVE_ID_MASK 0x7
+#define SLAVE_ID_SHIFT 16
+
+/**
+ * struct entry_header: header for each entry in cmddb
+ *
+ * @id: resource's identifier
+ * @priority: unused
+ * @addr: the address of the resource
+ * @len: length of the data
+ * @offset: offset from :@data_offset, start of the data
+ */
+struct entry_header {
+ u8 id[8];
+ __le32 priority[NUM_PRIORITY];
+ __le32 addr;
+ __le16 len;
+ __le16 offset;
+};
+
+/**
+ * struct rsc_hdr: resource header information
+ *
+ * @slv_id: id for the resource
+ * @header_offset: entry's header at offset from the end of the cmd_db_header
+ * @data_offset: entry's data at offset from the end of the cmd_db_header
+ * @cnt: number of entries for HW type
+ * @version: MSB is major, LSB is minor
+ * @reserved: reserved for future use.
+ */
+struct rsc_hdr {
+ __le16 slv_id;
+ __le16 header_offset;
+ __le16 data_offset;
+ __le16 cnt;
+ __le16 version;
+ __le16 reserved[3];
+};
+
+/**
+ * struct cmd_db_header: The DB header information
+ *
+ * @version: The cmd db version
+ * @magic: constant expected in the database
+ * @header: array of resources
+ * @checksum: checksum for the header. Unused.
+ * @reserved: reserved memory
+ * @data: driver specific data
+ */
+struct cmd_db_header {
+ __le32 version;
+ u8 magic[4];
+ struct rsc_hdr header[MAX_SLV_ID];
+ __le32 checksum;
+ __le32 reserved;
+ u8 data[];
+};
+
+/**
+ * DOC: Description of the Command DB database.
+ *
+ * At the start of the command DB memory is the cmd_db_header structure.
+ * The cmd_db_header holds the version, checksum, magic key as well as an
+ * array for header for each slave (depicted by the rsc_header). Each h/w
+ * based accelerator is a 'slave' (shared resource) and has slave id indicating
+ * the type of accelerator. The rsc_header is the header for such individual
+ * slaves of a given type. The entries for each of these slaves begin at the
+ * rsc_hdr.header_offset. In addition each slave could have auxiliary data
+ * that may be needed by the driver. The data for the slave starts at the
+ * entry_header.offset to the location pointed to by the rsc_hdr.data_offset.
+ *
+ * Drivers have a stringified key to a slave/resource. They can query the slave
+ * information and get the slave id and the auxiliary data and the length of the
+ * data. Using this information, they can format the request to be sent to the
+ * h/w accelerator and request a resource state.
+ */
+
+static const u8 CMD_DB_MAGIC[] = { 0xdb, 0x30, 0x03, 0x0c };
+
+static bool cmd_db_magic_matches(const struct cmd_db_header *header)
+{
+ const u8 *magic = header->magic;
+
+ return memcmp(magic, CMD_DB_MAGIC, ARRAY_SIZE(CMD_DB_MAGIC)) == 0;
+}
+
+static struct cmd_db_header *cmd_db_header;
+
+
+static inline void *rsc_to_entry_header(struct rsc_hdr *hdr)
+{
+ u16 offset = le16_to_cpu(hdr->header_offset);
+
+ return cmd_db_header->data + offset;
+}
+
+static inline void *
+rsc_offset(struct rsc_hdr *hdr, struct entry_header *ent)
+{
+ u16 offset = le16_to_cpu(hdr->data_offset);
+ u16 loffset = le16_to_cpu(ent->offset);
+
+ return cmd_db_header->data + offset + loffset;
+}
+
+/**
+ * cmd_db_ready - Indicates if command DB is available
+ *
+ * Return: 0 on success, errno otherwise
+ */
+int cmd_db_ready(void)
+{
+ if (cmd_db_header == NULL)
+ return -EPROBE_DEFER;
+ else if (!cmd_db_magic_matches(cmd_db_header))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(cmd_db_ready);
+
+static int cmd_db_get_header(const char *id, struct entry_header *eh,
+ struct rsc_hdr *rh)
+{
+ struct rsc_hdr *rsc_hdr;
+ struct entry_header *ent;
+ int ret, i, j;
+ u8 query[8];
+
+ ret = cmd_db_ready();
+ if (ret)
+ return ret;
+
+ if (!eh || !rh)
+ return -EINVAL;
+
+ /* Pad out query string to same length as in DB */
+ strncpy(query, id, sizeof(query));
+
+ for (i = 0; i < MAX_SLV_ID; i++) {
+ rsc_hdr = &cmd_db_header->header[i];
+ if (!rsc_hdr->slv_id)
+ break;
+
+ ent = rsc_to_entry_header(rsc_hdr);
+ for (j = 0; j < le16_to_cpu(rsc_hdr->cnt); j++, ent++) {
+ if (memcmp(ent->id, query, sizeof(ent->id)) == 0)
+ break;
+ }
+
+ if (j < le16_to_cpu(rsc_hdr->cnt)) {
+ memcpy(eh, ent, sizeof(*ent));
+ memcpy(rh, rsc_hdr, sizeof(*rh));
+ return 0;
+ }
+ }
+
+ return -ENODEV;
+}
+
+/**
+ * cmd_db_read_addr() - Query command db for resource id address.
+ *
+ * @id: resource id to query for address
+ *
+ * Return: resource address on success, 0 on error
+ *
+ * This is used to retrieve resource address based on resource
+ * id.
+ */
+u32 cmd_db_read_addr(const char *id)
+{
+ int ret;
+ struct entry_header ent;
+ struct rsc_hdr rsc_hdr;
+
+ ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+
+ return ret < 0 ? 0 : le32_to_cpu(ent.addr);
+}
+EXPORT_SYMBOL(cmd_db_read_addr);
+
+/**
+ * cmd_db_read_aux_data() - Query command db for aux data.
+ *
+ * @id: Resource to retrieve AUX Data on.
+ * @data: Data buffer to copy returned aux data to. Returns size on NULL
+ * @len: Caller provides size of data buffer passed in.
+ *
+ * Return: size of data on success, errno otherwise
+ */
+int cmd_db_read_aux_data(const char *id, u8 *data, size_t len)
+{
+ int ret;
+ struct entry_header ent;
+ struct rsc_hdr rsc_hdr;
+ u16 ent_len;
+
+ if (!data)
+ return -EINVAL;
+
+ ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+ if (ret)
+ return ret;
+
+ ent_len = le16_to_cpu(ent.len);
+ if (len < ent_len)
+ return -EINVAL;
+
+ len = min_t(u16, ent_len, len);
+ memcpy(data, rsc_offset(&rsc_hdr, &ent), len);
+
+ return len;
+}
+EXPORT_SYMBOL(cmd_db_read_aux_data);
+
+/**
+ * cmd_db_read_aux_data_len - Get the length of the auxiliary data stored in DB.
+ *
+ * @id: Resource to retrieve AUX Data.
+ *
+ * Return: size on success, 0 on error
+ */
+size_t cmd_db_read_aux_data_len(const char *id)
+{
+ int ret;
+ struct entry_header ent;
+ struct rsc_hdr rsc_hdr;
+
+ ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+
+ return ret < 0 ? 0 : le16_to_cpu(ent.len);
+}
+EXPORT_SYMBOL(cmd_db_read_aux_data_len);
+
+/**
+ * cmd_db_read_slave_id - Get the slave ID for a given resource address
+ *
+ * @id: Resource id to query the DB for version
+ *
+ * Return: cmd_db_hw_type enum on success, CMD_DB_HW_INVALID on error
+ */
+enum cmd_db_hw_type cmd_db_read_slave_id(const char *id)
+{
+ int ret;
+ struct entry_header ent;
+ struct rsc_hdr rsc_hdr;
+ u32 addr;
+
+ ret = cmd_db_get_header(id, &ent, &rsc_hdr);
+ if (ret < 0)
+ return CMD_DB_HW_INVALID;
+
+ addr = le32_to_cpu(ent.addr);
+ return (addr >> SLAVE_ID_SHIFT) & SLAVE_ID_MASK;
+}
+EXPORT_SYMBOL(cmd_db_read_slave_id);
+
+static int cmd_db_dev_probe(struct platform_device *pdev)
+{
+ struct reserved_mem *rmem;
+ int ret = 0;
+
+ rmem = of_reserved_mem_lookup(pdev->dev.of_node);
+ if (!rmem) {
+ dev_err(&pdev->dev, "failed to acquire memory region\n");
+ return -EINVAL;
+ }
+
+ cmd_db_header = memremap(rmem->base, rmem->size, MEMREMAP_WB);
+ if (IS_ERR_OR_NULL(cmd_db_header)) {
+ ret = PTR_ERR(cmd_db_header);
+ cmd_db_header = NULL;
+ return ret;
+ }
+
+ if (!cmd_db_magic_matches(cmd_db_header)) {
+ dev_err(&pdev->dev, "Invalid Command DB Magic\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id cmd_db_match_table[] = {
+ { .compatible = "qcom,cmd-db" },
+ { },
+};
+
+static struct platform_driver cmd_db_dev_driver = {
+ .probe = cmd_db_dev_probe,
+ .driver = {
+ .name = "cmd-db",
+ .of_match_table = cmd_db_match_table,
+ },
+};
+
+static int __init cmd_db_device_init(void)
+{
+ return platform_driver_register(&cmd_db_dev_driver);
+}
+arch_initcall(cmd_db_device_init);
diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c
new file mode 100644
index 000000000000..feed3db21c10
--- /dev/null
+++ b/drivers/soc/qcom/qcom-geni-se.c
@@ -0,0 +1,748 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved.
+
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/qcom-geni-se.h>
+
+/**
+ * DOC: Overview
+ *
+ * Generic Interface (GENI) Serial Engine (SE) Wrapper driver is introduced
+ * to manage GENI firmware based Qualcomm Universal Peripheral (QUP) Wrapper
+ * controller. QUP Wrapper is designed to support various serial bus protocols
+ * like UART, SPI, I2C, I3C, etc.
+ */
+
+/**
+ * DOC: Hardware description
+ *
+ * GENI based QUP is a highly-flexible and programmable module for supporting
+ * a wide range of serial interfaces like UART, SPI, I2C, I3C, etc. A single
+ * QUP module can provide upto 8 serial interfaces, using its internal
+ * serial engines. The actual configuration is determined by the target
+ * platform configuration. The protocol supported by each interface is
+ * determined by the firmware loaded to the serial engine. Each SE consists
+ * of a DMA Engine and GENI sub modules which enable serial engines to
+ * support FIFO and DMA modes of operation.
+ *
+ *
+ * +-----------------------------------------+
+ * |QUP Wrapper |
+ * | +----------------------------+ |
+ * --QUP & SE Clocks--> | Serial Engine N | +-IO------>
+ * | | ... | | Interface
+ * <---Clock Perf.----+ +----+-----------------------+ | |
+ * State Interface | | Serial Engine 1 | | |
+ * | | | | |
+ * | | | | |
+ * <--------AHB-------> | | | |
+ * | | +----+ |
+ * | | | |
+ * | | | |
+ * <------SE IRQ------+ +----------------------------+ |
+ * | |
+ * +-----------------------------------------+
+ *
+ * Figure 1: GENI based QUP Wrapper
+ *
+ * The GENI submodules include primary and secondary sequencers which are
+ * used to drive TX & RX operations. On serial interfaces that operate using
+ * master-slave model, primary sequencer drives both TX & RX operations. On
+ * serial interfaces that operate using peer-to-peer model, primary sequencer
+ * drives TX operation and secondary sequencer drives RX operation.
+ */
+
+/**
+ * DOC: Software description
+ *
+ * GENI SE Wrapper driver is structured into 2 parts:
+ *
+ * geni_wrapper represents QUP Wrapper controller. This part of the driver
+ * manages QUP Wrapper information such as hardware version, clock
+ * performance table that is common to all the internal serial engines.
+ *
+ * geni_se represents serial engine. This part of the driver manages serial
+ * engine information such as clocks, containing QUP Wrapper, etc. This part
+ * of driver also supports operations (eg. initialize the concerned serial
+ * engine, select between FIFO and DMA mode of operation etc.) that are
+ * common to all the serial engines and are independent of serial interfaces.
+ */
+
+#define MAX_CLK_PERF_LEVEL 32
+#define NUM_AHB_CLKS 2
+
+/**
+ * @struct geni_wrapper - Data structure to represent the QUP Wrapper Core
+ * @dev: Device pointer of the QUP wrapper core
+ * @base: Base address of this instance of QUP wrapper core
+ * @ahb_clks: Handle to the primary & secondary AHB clocks
+ */
+struct geni_wrapper {
+ struct device *dev;
+ void __iomem *base;
+ struct clk_bulk_data ahb_clks[NUM_AHB_CLKS];
+};
+
+#define QUP_HW_VER_REG 0x4
+
+/* Common SE registers */
+#define GENI_INIT_CFG_REVISION 0x0
+#define GENI_S_INIT_CFG_REVISION 0x4
+#define GENI_OUTPUT_CTRL 0x24
+#define GENI_CGC_CTRL 0x28
+#define GENI_CLK_CTRL_RO 0x60
+#define GENI_IF_DISABLE_RO 0x64
+#define GENI_FW_S_REVISION_RO 0x6c
+#define SE_GENI_BYTE_GRAN 0x254
+#define SE_GENI_TX_PACKING_CFG0 0x260
+#define SE_GENI_TX_PACKING_CFG1 0x264
+#define SE_GENI_RX_PACKING_CFG0 0x284
+#define SE_GENI_RX_PACKING_CFG1 0x288
+#define SE_GENI_M_GP_LENGTH 0x910
+#define SE_GENI_S_GP_LENGTH 0x914
+#define SE_DMA_TX_PTR_L 0xc30
+#define SE_DMA_TX_PTR_H 0xc34
+#define SE_DMA_TX_ATTR 0xc38
+#define SE_DMA_TX_LEN 0xc3c
+#define SE_DMA_TX_IRQ_EN 0xc48
+#define SE_DMA_TX_IRQ_EN_SET 0xc4c
+#define SE_DMA_TX_IRQ_EN_CLR 0xc50
+#define SE_DMA_TX_LEN_IN 0xc54
+#define SE_DMA_TX_MAX_BURST 0xc5c
+#define SE_DMA_RX_PTR_L 0xd30
+#define SE_DMA_RX_PTR_H 0xd34
+#define SE_DMA_RX_ATTR 0xd38
+#define SE_DMA_RX_LEN 0xd3c
+#define SE_DMA_RX_IRQ_EN 0xd48
+#define SE_DMA_RX_IRQ_EN_SET 0xd4c
+#define SE_DMA_RX_IRQ_EN_CLR 0xd50
+#define SE_DMA_RX_LEN_IN 0xd54
+#define SE_DMA_RX_MAX_BURST 0xd5c
+#define SE_DMA_RX_FLUSH 0xd60
+#define SE_GSI_EVENT_EN 0xe18
+#define SE_IRQ_EN 0xe1c
+#define SE_DMA_GENERAL_CFG 0xe30
+
+/* GENI_OUTPUT_CTRL fields */
+#define DEFAULT_IO_OUTPUT_CTRL_MSK GENMASK(6, 0)
+
+/* GENI_CGC_CTRL fields */
+#define CFG_AHB_CLK_CGC_ON BIT(0)
+#define CFG_AHB_WR_ACLK_CGC_ON BIT(1)
+#define DATA_AHB_CLK_CGC_ON BIT(2)
+#define SCLK_CGC_ON BIT(3)
+#define TX_CLK_CGC_ON BIT(4)
+#define RX_CLK_CGC_ON BIT(5)
+#define EXT_CLK_CGC_ON BIT(6)
+#define PROG_RAM_HCLK_OFF BIT(8)
+#define PROG_RAM_SCLK_OFF BIT(9)
+#define DEFAULT_CGC_EN GENMASK(6, 0)
+
+/* SE_GSI_EVENT_EN fields */
+#define DMA_RX_EVENT_EN BIT(0)
+#define DMA_TX_EVENT_EN BIT(1)
+#define GENI_M_EVENT_EN BIT(2)
+#define GENI_S_EVENT_EN BIT(3)
+
+/* SE_IRQ_EN fields */
+#define DMA_RX_IRQ_EN BIT(0)
+#define DMA_TX_IRQ_EN BIT(1)
+#define GENI_M_IRQ_EN BIT(2)
+#define GENI_S_IRQ_EN BIT(3)
+
+/* SE_DMA_GENERAL_CFG */
+#define DMA_RX_CLK_CGC_ON BIT(0)
+#define DMA_TX_CLK_CGC_ON BIT(1)
+#define DMA_AHB_SLV_CFG_ON BIT(2)
+#define AHB_SEC_SLV_CLK_CGC_ON BIT(3)
+#define DUMMY_RX_NON_BUFFERABLE BIT(4)
+#define RX_DMA_ZERO_PADDING_EN BIT(5)
+#define RX_DMA_IRQ_DELAY_MSK GENMASK(8, 6)
+#define RX_DMA_IRQ_DELAY_SHFT 6
+
+/**
+ * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version
+ * @se: Pointer to the corresponding serial engine.
+ *
+ * Return: Hardware Version of the wrapper.
+ */
+u32 geni_se_get_qup_hw_version(struct geni_se *se)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+
+ return readl_relaxed(wrapper->base + QUP_HW_VER_REG);
+}
+EXPORT_SYMBOL(geni_se_get_qup_hw_version);
+
+static void geni_se_io_set_mode(void __iomem *base)
+{
+ u32 val;
+
+ val = readl_relaxed(base + SE_IRQ_EN);
+ val |= GENI_M_IRQ_EN | GENI_S_IRQ_EN;
+ val |= DMA_TX_IRQ_EN | DMA_RX_IRQ_EN;
+ writel_relaxed(val, base + SE_IRQ_EN);
+
+ val = readl_relaxed(base + SE_GENI_DMA_MODE_EN);
+ val &= ~GENI_DMA_MODE_EN;
+ writel_relaxed(val, base + SE_GENI_DMA_MODE_EN);
+
+ writel_relaxed(0, base + SE_GSI_EVENT_EN);
+}
+
+static void geni_se_io_init(void __iomem *base)
+{
+ u32 val;
+
+ val = readl_relaxed(base + GENI_CGC_CTRL);
+ val |= DEFAULT_CGC_EN;
+ writel_relaxed(val, base + GENI_CGC_CTRL);
+
+ val = readl_relaxed(base + SE_DMA_GENERAL_CFG);
+ val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CFG_ON;
+ val |= DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON;
+ writel_relaxed(val, base + SE_DMA_GENERAL_CFG);
+
+ writel_relaxed(DEFAULT_IO_OUTPUT_CTRL_MSK, base + GENI_OUTPUT_CTRL);
+ writel_relaxed(FORCE_DEFAULT, base + GENI_FORCE_DEFAULT_REG);
+}
+
+/**
+ * geni_se_init() - Initialize the GENI serial engine
+ * @se: Pointer to the concerned serial engine.
+ * @rx_wm: Receive watermark, in units of FIFO words.
+ * @rx_rfr_wm: Ready-for-receive watermark, in units of FIFO words.
+ *
+ * This function is used to initialize the GENI serial engine, configure
+ * receive watermark and ready-for-receive watermarks.
+ */
+void geni_se_init(struct geni_se *se, u32 rx_wm, u32 rx_rfr)
+{
+ u32 val;
+
+ geni_se_io_init(se->base);
+ geni_se_io_set_mode(se->base);
+
+ writel_relaxed(rx_wm, se->base + SE_GENI_RX_WATERMARK_REG);
+ writel_relaxed(rx_rfr, se->base + SE_GENI_RX_RFR_WATERMARK_REG);
+
+ val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
+ val |= M_COMMON_GENI_M_IRQ_EN;
+ writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+
+ val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+ val |= S_COMMON_GENI_S_IRQ_EN;
+ writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+}
+EXPORT_SYMBOL(geni_se_init);
+
+static void geni_se_select_fifo_mode(struct geni_se *se)
+{
+ u32 proto = geni_se_read_proto(se);
+ u32 val;
+
+ writel_relaxed(0, se->base + SE_GSI_EVENT_EN);
+ writel_relaxed(0xffffffff, se->base + SE_GENI_M_IRQ_CLEAR);
+ writel_relaxed(0xffffffff, se->base + SE_GENI_S_IRQ_CLEAR);
+ writel_relaxed(0xffffffff, se->base + SE_DMA_TX_IRQ_CLR);
+ writel_relaxed(0xffffffff, se->base + SE_DMA_RX_IRQ_CLR);
+ writel_relaxed(0xffffffff, se->base + SE_IRQ_EN);
+
+ val = readl_relaxed(se->base + SE_GENI_M_IRQ_EN);
+ if (proto != GENI_SE_UART) {
+ val |= M_CMD_DONE_EN | M_TX_FIFO_WATERMARK_EN;
+ val |= M_RX_FIFO_WATERMARK_EN | M_RX_FIFO_LAST_EN;
+ }
+ writel_relaxed(val, se->base + SE_GENI_M_IRQ_EN);
+
+ val = readl_relaxed(se->base + SE_GENI_S_IRQ_EN);
+ if (proto != GENI_SE_UART)
+ val |= S_CMD_DONE_EN;
+ writel_relaxed(val, se->base + SE_GENI_S_IRQ_EN);
+
+ val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+ val &= ~GENI_DMA_MODE_EN;
+ writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+}
+
+static void geni_se_select_dma_mode(struct geni_se *se)
+{
+ u32 val;
+
+ writel_relaxed(0, se->base + SE_GSI_EVENT_EN);
+ writel_relaxed(0xffffffff, se->base + SE_GENI_M_IRQ_CLEAR);
+ writel_relaxed(0xffffffff, se->base + SE_GENI_S_IRQ_CLEAR);
+ writel_relaxed(0xffffffff, se->base + SE_DMA_TX_IRQ_CLR);
+ writel_relaxed(0xffffffff, se->base + SE_DMA_RX_IRQ_CLR);
+ writel_relaxed(0xffffffff, se->base + SE_IRQ_EN);
+
+ val = readl_relaxed(se->base + SE_GENI_DMA_MODE_EN);
+ val |= GENI_DMA_MODE_EN;
+ writel_relaxed(val, se->base + SE_GENI_DMA_MODE_EN);
+}
+
+/**
+ * geni_se_select_mode() - Select the serial engine transfer mode
+ * @se: Pointer to the concerned serial engine.
+ * @mode: Transfer mode to be selected.
+ */
+void geni_se_select_mode(struct geni_se *se, enum geni_se_xfer_mode mode)
+{
+ WARN_ON(mode != GENI_SE_FIFO && mode != GENI_SE_DMA);
+
+ switch (mode) {
+ case GENI_SE_FIFO:
+ geni_se_select_fifo_mode(se);
+ break;
+ case GENI_SE_DMA:
+ geni_se_select_dma_mode(se);
+ break;
+ case GENI_SE_INVALID:
+ default:
+ break;
+ }
+}
+EXPORT_SYMBOL(geni_se_select_mode);
+
+/**
+ * DOC: Overview
+ *
+ * GENI FIFO packing is highly configurable. TX/RX packing/unpacking consist
+ * of up to 4 operations, each operation represented by 4 configuration vectors
+ * of 10 bits programmed in GENI_TX_PACKING_CFG0 and GENI_TX_PACKING_CFG1 for
+ * TX FIFO and in GENI_RX_PACKING_CFG0 and GENI_RX_PACKING_CFG1 for RX FIFO.
+ * Refer to below examples for detailed bit-field description.
+ *
+ * Example 1: word_size = 7, packing_mode = 4 x 8, msb_to_lsb = 1
+ *
+ * +-----------+-------+-------+-------+-------+
+ * | | vec_0 | vec_1 | vec_2 | vec_3 |
+ * +-----------+-------+-------+-------+-------+
+ * | start | 0x6 | 0xe | 0x16 | 0x1e |
+ * | direction | 1 | 1 | 1 | 1 |
+ * | length | 6 | 6 | 6 | 6 |
+ * | stop | 0 | 0 | 0 | 1 |
+ * +-----------+-------+-------+-------+-------+
+ *
+ * Example 2: word_size = 15, packing_mode = 2 x 16, msb_to_lsb = 0
+ *
+ * +-----------+-------+-------+-------+-------+
+ * | | vec_0 | vec_1 | vec_2 | vec_3 |
+ * +-----------+-------+-------+-------+-------+
+ * | start | 0x0 | 0x8 | 0x10 | 0x18 |
+ * | direction | 0 | 0 | 0 | 0 |
+ * | length | 7 | 6 | 7 | 6 |
+ * | stop | 0 | 0 | 0 | 1 |
+ * +-----------+-------+-------+-------+-------+
+ *
+ * Example 3: word_size = 23, packing_mode = 1 x 32, msb_to_lsb = 1
+ *
+ * +-----------+-------+-------+-------+-------+
+ * | | vec_0 | vec_1 | vec_2 | vec_3 |
+ * +-----------+-------+-------+-------+-------+
+ * | start | 0x16 | 0xe | 0x6 | 0x0 |
+ * | direction | 1 | 1 | 1 | 1 |
+ * | length | 7 | 7 | 6 | 0 |
+ * | stop | 0 | 0 | 1 | 0 |
+ * +-----------+-------+-------+-------+-------+
+ *
+ */
+
+#define NUM_PACKING_VECTORS 4
+#define PACKING_START_SHIFT 5
+#define PACKING_DIR_SHIFT 4
+#define PACKING_LEN_SHIFT 1
+#define PACKING_STOP_BIT BIT(0)
+#define PACKING_VECTOR_SHIFT 10
+/**
+ * geni_se_config_packing() - Packing configuration of the serial engine
+ * @se: Pointer to the concerned serial engine
+ * @bpw: Bits of data per transfer word.
+ * @pack_words: Number of words per fifo element.
+ * @msb_to_lsb: Transfer from MSB to LSB or vice-versa.
+ * @tx_cfg: Flag to configure the TX Packing.
+ * @rx_cfg: Flag to configure the RX Packing.
+ *
+ * This function is used to configure the packing rules for the current
+ * transfer.
+ */
+void geni_se_config_packing(struct geni_se *se, int bpw, int pack_words,
+ bool msb_to_lsb, bool tx_cfg, bool rx_cfg)
+{
+ u32 cfg0, cfg1, cfg[NUM_PACKING_VECTORS] = {0};
+ int len;
+ int temp_bpw = bpw;
+ int idx_start = msb_to_lsb ? bpw - 1 : 0;
+ int idx = idx_start;
+ int idx_delta = msb_to_lsb ? -BITS_PER_BYTE : BITS_PER_BYTE;
+ int ceil_bpw = ALIGN(bpw, BITS_PER_BYTE);
+ int iter = (ceil_bpw * pack_words) / BITS_PER_BYTE;
+ int i;
+
+ if (iter <= 0 || iter > NUM_PACKING_VECTORS)
+ return;
+
+ for (i = 0; i < iter; i++) {
+ len = min_t(int, temp_bpw, BITS_PER_BYTE) - 1;
+ cfg[i] = idx << PACKING_START_SHIFT;
+ cfg[i] |= msb_to_lsb << PACKING_DIR_SHIFT;
+ cfg[i] |= len << PACKING_LEN_SHIFT;
+
+ if (temp_bpw <= BITS_PER_BYTE) {
+ idx = ((i + 1) * BITS_PER_BYTE) + idx_start;
+ temp_bpw = bpw;
+ } else {
+ idx = idx + idx_delta;
+ temp_bpw = temp_bpw - BITS_PER_BYTE;
+ }
+ }
+ cfg[iter - 1] |= PACKING_STOP_BIT;
+ cfg0 = cfg[0] | (cfg[1] << PACKING_VECTOR_SHIFT);
+ cfg1 = cfg[2] | (cfg[3] << PACKING_VECTOR_SHIFT);
+
+ if (tx_cfg) {
+ writel_relaxed(cfg0, se->base + SE_GENI_TX_PACKING_CFG0);
+ writel_relaxed(cfg1, se->base + SE_GENI_TX_PACKING_CFG1);
+ }
+ if (rx_cfg) {
+ writel_relaxed(cfg0, se->base + SE_GENI_RX_PACKING_CFG0);
+ writel_relaxed(cfg1, se->base + SE_GENI_RX_PACKING_CFG1);
+ }
+
+ /*
+ * Number of protocol words in each FIFO entry
+ * 0 - 4x8, four words in each entry, max word size of 8 bits
+ * 1 - 2x16, two words in each entry, max word size of 16 bits
+ * 2 - 1x32, one word in each entry, max word size of 32 bits
+ * 3 - undefined
+ */
+ if (pack_words || bpw == 32)
+ writel_relaxed(bpw / 16, se->base + SE_GENI_BYTE_GRAN);
+}
+EXPORT_SYMBOL(geni_se_config_packing);
+
+static void geni_se_clks_off(struct geni_se *se)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+
+ clk_disable_unprepare(se->clk);
+ clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
+ wrapper->ahb_clks);
+}
+
+/**
+ * geni_se_resources_off() - Turn off resources associated with the serial
+ * engine
+ * @se: Pointer to the concerned serial engine.
+ *
+ * Return: 0 on success, standard Linux error codes on failure/error.
+ */
+int geni_se_resources_off(struct geni_se *se)
+{
+ int ret;
+
+ ret = pinctrl_pm_select_sleep_state(se->dev);
+ if (ret)
+ return ret;
+
+ geni_se_clks_off(se);
+ return 0;
+}
+EXPORT_SYMBOL(geni_se_resources_off);
+
+static int geni_se_clks_on(struct geni_se *se)
+{
+ int ret;
+ struct geni_wrapper *wrapper = se->wrapper;
+
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(wrapper->ahb_clks),
+ wrapper->ahb_clks);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(se->clk);
+ if (ret)
+ clk_bulk_disable_unprepare(ARRAY_SIZE(wrapper->ahb_clks),
+ wrapper->ahb_clks);
+ return ret;
+}
+
+/**
+ * geni_se_resources_on() - Turn on resources associated with the serial
+ * engine
+ * @se: Pointer to the concerned serial engine.
+ *
+ * Return: 0 on success, standard Linux error codes on failure/error.
+ */
+int geni_se_resources_on(struct geni_se *se)
+{
+ int ret;
+
+ ret = geni_se_clks_on(se);
+ if (ret)
+ return ret;
+
+ ret = pinctrl_pm_select_default_state(se->dev);
+ if (ret)
+ geni_se_clks_off(se);
+
+ return ret;
+}
+EXPORT_SYMBOL(geni_se_resources_on);
+
+/**
+ * geni_se_clk_tbl_get() - Get the clock table to program DFS
+ * @se: Pointer to the concerned serial engine.
+ * @tbl: Table in which the output is returned.
+ *
+ * This function is called by the protocol drivers to determine the different
+ * clock frequencies supported by serial engine core clock. The protocol
+ * drivers use the output to determine the clock frequency index to be
+ * programmed into DFS.
+ *
+ * Return: number of valid performance levels in the table on success,
+ * standard Linux error codes on failure.
+ */
+int geni_se_clk_tbl_get(struct geni_se *se, unsigned long **tbl)
+{
+ unsigned long freq = 0;
+ int i;
+
+ if (se->clk_perf_tbl) {
+ *tbl = se->clk_perf_tbl;
+ return se->num_clk_levels;
+ }
+
+ se->clk_perf_tbl = devm_kcalloc(se->dev, MAX_CLK_PERF_LEVEL,
+ sizeof(*se->clk_perf_tbl),
+ GFP_KERNEL);
+ if (!se->clk_perf_tbl)
+ return -ENOMEM;
+
+ for (i = 0; i < MAX_CLK_PERF_LEVEL; i++) {
+ freq = clk_round_rate(se->clk, freq + 1);
+ if (!freq || freq == se->clk_perf_tbl[i - 1])
+ break;
+ se->clk_perf_tbl[i] = freq;
+ }
+ se->num_clk_levels = i;
+ *tbl = se->clk_perf_tbl;
+ return se->num_clk_levels;
+}
+EXPORT_SYMBOL(geni_se_clk_tbl_get);
+
+/**
+ * geni_se_clk_freq_match() - Get the matching or closest SE clock frequency
+ * @se: Pointer to the concerned serial engine.
+ * @req_freq: Requested clock frequency.
+ * @index: Index of the resultant frequency in the table.
+ * @res_freq: Resultant frequency which matches or is closer to the
+ * requested frequency.
+ * @exact: Flag to indicate exact multiple requirement of the requested
+ * frequency.
+ *
+ * This function is called by the protocol drivers to determine the matching
+ * or exact multiple of the requested frequency, as provided by the serial
+ * engine clock in order to meet the performance requirements. If there is
+ * no matching or exact multiple of the requested frequency found, then it
+ * selects the closest floor frequency, if exact flag is not set.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq,
+ unsigned int *index, unsigned long *res_freq,
+ bool exact)
+{
+ unsigned long *tbl;
+ int num_clk_levels;
+ int i;
+
+ num_clk_levels = geni_se_clk_tbl_get(se, &tbl);
+ if (num_clk_levels < 0)
+ return num_clk_levels;
+
+ if (num_clk_levels == 0)
+ return -EINVAL;
+
+ *res_freq = 0;
+ for (i = 0; i < num_clk_levels; i++) {
+ if (!(tbl[i] % req_freq)) {
+ *index = i;
+ *res_freq = tbl[i];
+ return 0;
+ }
+
+ if (!(*res_freq) || ((tbl[i] > *res_freq) &&
+ (tbl[i] < req_freq))) {
+ *index = i;
+ *res_freq = tbl[i];
+ }
+ }
+
+ if (exact)
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL(geni_se_clk_freq_match);
+
+#define GENI_SE_DMA_DONE_EN BIT(0)
+#define GENI_SE_DMA_EOT_EN BIT(1)
+#define GENI_SE_DMA_AHB_ERR_EN BIT(2)
+#define GENI_SE_DMA_EOT_BUF BIT(0)
+/**
+ * geni_se_tx_dma_prep() - Prepare the serial engine for TX DMA transfer
+ * @se: Pointer to the concerned serial engine.
+ * @buf: Pointer to the TX buffer.
+ * @len: Length of the TX buffer.
+ * @iova: Pointer to store the mapped DMA address.
+ *
+ * This function is used to prepare the buffers for DMA TX.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_tx_dma_prep(struct geni_se *se, void *buf, size_t len,
+ dma_addr_t *iova)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+ u32 val;
+
+ *iova = dma_map_single(wrapper->dev, buf, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(wrapper->dev, *iova))
+ return -EIO;
+
+ val = GENI_SE_DMA_DONE_EN;
+ val |= GENI_SE_DMA_EOT_EN;
+ val |= GENI_SE_DMA_AHB_ERR_EN;
+ writel_relaxed(val, se->base + SE_DMA_TX_IRQ_EN_SET);
+ writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_TX_PTR_L);
+ writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_TX_PTR_H);
+ writel_relaxed(GENI_SE_DMA_EOT_BUF, se->base + SE_DMA_TX_ATTR);
+ writel_relaxed(len, se->base + SE_DMA_TX_LEN);
+ return 0;
+}
+EXPORT_SYMBOL(geni_se_tx_dma_prep);
+
+/**
+ * geni_se_rx_dma_prep() - Prepare the serial engine for RX DMA transfer
+ * @se: Pointer to the concerned serial engine.
+ * @buf: Pointer to the RX buffer.
+ * @len: Length of the RX buffer.
+ * @iova: Pointer to store the mapped DMA address.
+ *
+ * This function is used to prepare the buffers for DMA RX.
+ *
+ * Return: 0 on success, standard Linux error codes on failure.
+ */
+int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len,
+ dma_addr_t *iova)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+ u32 val;
+
+ *iova = dma_map_single(wrapper->dev, buf, len, DMA_FROM_DEVICE);
+ if (dma_mapping_error(wrapper->dev, *iova))
+ return -EIO;
+
+ val = GENI_SE_DMA_DONE_EN;
+ val |= GENI_SE_DMA_EOT_EN;
+ val |= GENI_SE_DMA_AHB_ERR_EN;
+ writel_relaxed(val, se->base + SE_DMA_RX_IRQ_EN_SET);
+ writel_relaxed(lower_32_bits(*iova), se->base + SE_DMA_RX_PTR_L);
+ writel_relaxed(upper_32_bits(*iova), se->base + SE_DMA_RX_PTR_H);
+ /* RX does not have EOT buffer type bit. So just reset RX_ATTR */
+ writel_relaxed(0, se->base + SE_DMA_RX_ATTR);
+ writel_relaxed(len, se->base + SE_DMA_RX_LEN);
+ return 0;
+}
+EXPORT_SYMBOL(geni_se_rx_dma_prep);
+
+/**
+ * geni_se_tx_dma_unprep() - Unprepare the serial engine after TX DMA transfer
+ * @se: Pointer to the concerned serial engine.
+ * @iova: DMA address of the TX buffer.
+ * @len: Length of the TX buffer.
+ *
+ * This function is used to unprepare the DMA buffers after DMA TX.
+ */
+void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+
+ if (iova && !dma_mapping_error(wrapper->dev, iova))
+ dma_unmap_single(wrapper->dev, iova, len, DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL(geni_se_tx_dma_unprep);
+
+/**
+ * geni_se_rx_dma_unprep() - Unprepare the serial engine after RX DMA transfer
+ * @se: Pointer to the concerned serial engine.
+ * @iova: DMA address of the RX buffer.
+ * @len: Length of the RX buffer.
+ *
+ * This function is used to unprepare the DMA buffers after DMA RX.
+ */
+void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len)
+{
+ struct geni_wrapper *wrapper = se->wrapper;
+
+ if (iova && !dma_mapping_error(wrapper->dev, iova))
+ dma_unmap_single(wrapper->dev, iova, len, DMA_FROM_DEVICE);
+}
+EXPORT_SYMBOL(geni_se_rx_dma_unprep);
+
+static int geni_se_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ struct geni_wrapper *wrapper;
+ int ret;
+
+ wrapper = devm_kzalloc(dev, sizeof(*wrapper), GFP_KERNEL);
+ if (!wrapper)
+ return -ENOMEM;
+
+ wrapper->dev = dev;
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ wrapper->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(wrapper->base))
+ return PTR_ERR(wrapper->base);
+
+ wrapper->ahb_clks[0].id = "m-ahb";
+ wrapper->ahb_clks[1].id = "s-ahb";
+ ret = devm_clk_bulk_get(dev, NUM_AHB_CLKS, wrapper->ahb_clks);
+ if (ret) {
+ dev_err(dev, "Err getting AHB clks %d\n", ret);
+ return ret;
+ }
+
+ dev_set_drvdata(dev, wrapper);
+ dev_dbg(dev, "GENI SE Driver probed\n");
+ return devm_of_platform_populate(dev);
+}
+
+static const struct of_device_id geni_se_dt_match[] = {
+ { .compatible = "qcom,geni-se-qup", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, geni_se_dt_match);
+
+static struct platform_driver geni_se_driver = {
+ .driver = {
+ .name = "geni_se_qup",
+ .of_match_table = geni_se_dt_match,
+ },
+ .probe = geni_se_probe,
+};
+module_platform_driver(geni_se_driver);
+
+MODULE_DESCRIPTION("GENI Serial Engine Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/soc/qcom/qmi_interface.c b/drivers/soc/qcom/qmi_interface.c
index 321982277697..938ca41c56cd 100644
--- a/drivers/soc/qcom/qmi_interface.c
+++ b/drivers/soc/qcom/qmi_interface.c
@@ -639,10 +639,11 @@ int qmi_handle_init(struct qmi_handle *qmi, size_t recv_buf_size,
if (ops)
qmi->ops = *ops;
+ /* Make room for the header */
+ recv_buf_size += sizeof(struct qmi_header);
+ /* Must also be sufficient to hold a control packet */
if (recv_buf_size < sizeof(struct qrtr_ctrl_pkt))
recv_buf_size = sizeof(struct qrtr_ctrl_pkt);
- else
- recv_buf_size += sizeof(struct qmi_header);
qmi->recv_buf_size = recv_buf_size;
qmi->recv_buf = kzalloc(recv_buf_size, GFP_KERNEL);
diff --git a/drivers/soc/qcom/smd-rpm.c b/drivers/soc/qcom/smd-rpm.c
index c2346752b3ea..93517ed83355 100644
--- a/drivers/soc/qcom/smd-rpm.c
+++ b/drivers/soc/qcom/smd-rpm.c
@@ -226,6 +226,7 @@ static const struct of_device_id qcom_smd_rpm_of_match[] = {
{ .compatible = "qcom,rpm-msm8916" },
{ .compatible = "qcom,rpm-msm8974" },
{ .compatible = "qcom,rpm-msm8996" },
+ { .compatible = "qcom,rpm-msm8998" },
{}
};
MODULE_DEVICE_TABLE(of, qcom_smd_rpm_of_match);
diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c
index 0b94d62fad2b..70b2ee80d6bd 100644
--- a/drivers/soc/qcom/smem.c
+++ b/drivers/soc/qcom/smem.c
@@ -280,7 +280,7 @@ struct qcom_smem {
struct smem_region regions[0];
};
-static struct smem_private_entry *
+static void *
phdr_to_last_uncached_entry(struct smem_partition_header *phdr)
{
void *p = phdr;
@@ -288,15 +288,18 @@ phdr_to_last_uncached_entry(struct smem_partition_header *phdr)
return p + le32_to_cpu(phdr->offset_free_uncached);
}
-static void *phdr_to_first_cached_entry(struct smem_partition_header *phdr,
+static struct smem_private_entry *
+phdr_to_first_cached_entry(struct smem_partition_header *phdr,
size_t cacheline)
{
void *p = phdr;
+ struct smem_private_entry *e;
- return p + le32_to_cpu(phdr->size) - ALIGN(sizeof(*phdr), cacheline);
+ return p + le32_to_cpu(phdr->size) - ALIGN(sizeof(*e), cacheline);
}
-static void *phdr_to_last_cached_entry(struct smem_partition_header *phdr)
+static void *
+phdr_to_last_cached_entry(struct smem_partition_header *phdr)
{
void *p = phdr;
@@ -361,14 +364,14 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
end = phdr_to_last_uncached_entry(phdr);
cached = phdr_to_last_cached_entry(phdr);
- while (hdr < end) {
- if (hdr->canary != SMEM_PRIVATE_CANARY) {
- dev_err(smem->dev,
- "Found invalid canary in hosts %d:%d partition\n",
- phdr->host0, phdr->host1);
- return -EINVAL;
- }
+ if (smem->global_partition) {
+ dev_err(smem->dev, "Already found the global partition\n");
+ return -EINVAL;
+ }
+ while (hdr < end) {
+ if (hdr->canary != SMEM_PRIVATE_CANARY)
+ goto bad_canary;
if (le16_to_cpu(hdr->item) == item)
return -EEXIST;
@@ -377,7 +380,7 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
/* Check that we don't grow into the cached region */
alloc_size = sizeof(*hdr) + ALIGN(size, 8);
- if ((void *)hdr + alloc_size >= cached) {
+ if ((void *)hdr + alloc_size > cached) {
dev_err(smem->dev, "Out of memory\n");
return -ENOSPC;
}
@@ -397,6 +400,11 @@ static int qcom_smem_alloc_private(struct qcom_smem *smem,
le32_add_cpu(&phdr->offset_free_uncached, alloc_size);
return 0;
+bad_canary:
+ dev_err(smem->dev, "Found invalid canary in hosts %hu:%hu partition\n",
+ le16_to_cpu(phdr->host0), le16_to_cpu(phdr->host1));
+
+ return -EINVAL;
}
static int qcom_smem_alloc_global(struct qcom_smem *smem,
@@ -560,8 +568,8 @@ static void *qcom_smem_get_private(struct qcom_smem *smem,
return ERR_PTR(-ENOENT);
invalid_canary:
- dev_err(smem->dev, "Found invalid canary in hosts %d:%d partition\n",
- phdr->host0, phdr->host1);
+ dev_err(smem->dev, "Found invalid canary in hosts %hu:%hu partition\n",
+ le16_to_cpu(phdr->host0), le16_to_cpu(phdr->host1));
return ERR_PTR(-EINVAL);
}
@@ -647,6 +655,33 @@ int qcom_smem_get_free_space(unsigned host)
}
EXPORT_SYMBOL(qcom_smem_get_free_space);
+/**
+ * qcom_smem_virt_to_phys() - return the physical address associated
+ * with an smem item pointer (previously returned by qcom_smem_get()
+ * @p: the virtual address to convert
+ *
+ * Returns 0 if the pointer provided is not within any smem region.
+ */
+phys_addr_t qcom_smem_virt_to_phys(void *p)
+{
+ unsigned i;
+
+ for (i = 0; i < __smem->num_regions; i++) {
+ struct smem_region *region = &__smem->regions[i];
+
+ if (p < region->virt_base)
+ continue;
+ if (p < region->virt_base + region->size) {
+ u64 offset = p - region->virt_base;
+
+ return (phys_addr_t)region->aux_base + offset;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(qcom_smem_virt_to_phys);
+
static int qcom_smem_get_sbl_version(struct qcom_smem *smem)
{
struct smem_header *header;
@@ -695,9 +730,10 @@ static u32 qcom_smem_get_item_count(struct qcom_smem *smem)
static int qcom_smem_set_global_partition(struct qcom_smem *smem)
{
struct smem_partition_header *header;
- struct smem_ptable_entry *entry = NULL;
+ struct smem_ptable_entry *entry;
struct smem_ptable *ptable;
u32 host0, host1, size;
+ bool found = false;
int i;
ptable = qcom_smem_get_ptable(smem);
@@ -709,11 +745,13 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
host0 = le16_to_cpu(entry->host0);
host1 = le16_to_cpu(entry->host1);
- if (host0 == SMEM_GLOBAL_HOST && host0 == host1)
+ if (host0 == SMEM_GLOBAL_HOST && host0 == host1) {
+ found = true;
break;
+ }
}
- if (!entry) {
+ if (!found) {
dev_err(smem->dev, "Missing entry for global partition\n");
return -EINVAL;
}
@@ -723,11 +761,6 @@ static int qcom_smem_set_global_partition(struct qcom_smem *smem)
return -EINVAL;
}
- if (smem->global_partition) {
- dev_err(smem->dev, "Already found the global partition\n");
- return -EINVAL;
- }
-
header = smem->regions[0].virt_base + le32_to_cpu(entry->offset);
host0 = le16_to_cpu(header->host0);
host1 = le16_to_cpu(header->host1);