summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-08 18:49:23 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-08 18:49:23 -0700
commit8f3207c7eab9d885cc64c778416537034a7d9c5b (patch)
tree733ec3a8c62b1906a72a6075966c1f57a37b0387 /drivers
parentbf5f89463f5b3109a72ed13ca62b57e90213387d (diff)
parent8e1c21f486944bf92f2a981f23ee811a45f5eaff (diff)
Merge tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH: "Here is the "big" TTY/Serial patch updates for 4.12-rc1 Not a lot of new things here, the normal number of serial driver updates and additions, tiny bugs fixed, and some core files split up to make future changes a bit easier for Nicolas's "tiny-tty" work. All of these have been in linux-next for a while" * tag 'tty-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (62 commits) serial: small Makefile reordering tty: split job control support into a file of its own tty: move baudrate handling code to a file of its own console: move console_init() out of tty_io.c serial: 8250_early: Add earlycon support for Palmchip UART tty: pl011: use "qdf2400_e44" as the earlycon name for QDF2400 E44 vt: make mouse selection of non-ASCII consistent vt: set mouse selection word-chars to gpm's default imx-serial: Reduce RX DMA startup latency when opening for reading serial: omap: suspend device on probe errors serial: omap: fix runtime-pm handling on unbind tty: serial: omap: add UPF_BOOT_AUTOCONF flag for DT init serial: samsung: Remove useless spinlock serial: samsung: Add missing checks for dma_map_single failure serial: samsung: Use right device for DMA-mapping calls serial: imx: setup DCEDTE early and ensure DCD and RI irqs to be off tty: fix comment typo s/repsonsible/responsible/ tty: amba-pl011: Fix spurious TX interrupts serial: xuartps: Enable clocks in the pm disable case also serial: core: Re-use struct uart_port {name} field ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/tty/Makefile3
-rw-r--r--drivers/tty/hvc/hvc_console.c4
-rw-r--r--drivers/tty/hvc/hvcs.c2
-rw-r--r--drivers/tty/n_gsm.c21
-rw-r--r--drivers/tty/pty.c7
-rw-r--r--drivers/tty/serdev/core.c36
-rw-r--r--drivers/tty/serial/8250/8250_core.c2
-rw-r--r--drivers/tty/serial/8250/8250_dw.c13
-rw-r--r--drivers/tty/serial/8250/8250_early.c24
-rw-r--r--drivers/tty/serial/8250/8250_exar.c2
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c43
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c3
-rw-r--r--drivers/tty/serial/8250/8250_port.c4
-rw-r--r--drivers/tty/serial/Kconfig11
-rw-r--r--drivers/tty/serial/Makefile3
-rw-r--r--drivers/tty/serial/altera_jtaguart.c20
-rw-r--r--drivers/tty/serial/altera_uart.c32
-rw-r--r--drivers/tty/serial/amba-pl011.c54
-rw-r--r--drivers/tty/serial/atmel_serial.c7
-rw-r--r--drivers/tty/serial/atmel_serial.h169
-rw-r--r--drivers/tty/serial/fsl_lpuart.c20
-rw-r--r--drivers/tty/serial/imx.c99
-rw-r--r--drivers/tty/serial/omap-serial.c9
-rw-r--r--drivers/tty/serial/samsung.c44
-rw-r--r--drivers/tty/serial/sb1250-duart.c18
-rw-r--r--drivers/tty/serial/serial_core.c34
-rw-r--r--drivers/tty/serial/sh-sci.c43
-rw-r--r--drivers/tty/serial/sprd_serial.c2
-rw-r--r--drivers/tty/serial/st-asc.c10
-rw-r--r--drivers/tty/serial/uartlite.c2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c71
-rw-r--r--drivers/tty/tty_baudrate.c232
-rw-r--r--drivers/tty/tty_io.c633
-rw-r--r--drivers/tty/tty_ioctl.c222
-rw-r--r--drivers/tty/tty_jobctrl.c554
-rw-r--r--drivers/tty/vt/selection.c18
-rw-r--r--drivers/tty/vt/vt.c2
37 files changed, 1467 insertions, 1006 deletions
diff --git a/drivers/tty/Makefile b/drivers/tty/Makefile
index b95bed92da9f..f02becdb3e33 100644
--- a/drivers/tty/Makefile
+++ b/drivers/tty/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_TTY) += tty_io.o n_tty.o tty_ioctl.o tty_ldisc.o \
- tty_buffer.o tty_port.o tty_mutex.o tty_ldsem.o
+ tty_buffer.o tty_port.o tty_mutex.o \
+ tty_ldsem.o tty_baudrate.o tty_jobctrl.o
obj-$(CONFIG_LEGACY_PTYS) += pty.o
obj-$(CONFIG_UNIX98_PTYS) += pty.o
obj-$(CONFIG_AUDIT) += tty_audit.o
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c
index b19ae36a05ec..a8d399188242 100644
--- a/drivers/tty/hvc/hvc_console.c
+++ b/drivers/tty/hvc/hvc_console.c
@@ -920,17 +920,17 @@ int hvc_remove(struct hvc_struct *hp)
tty = tty_port_tty_get(&hp->port);
+ console_lock();
spin_lock_irqsave(&hp->lock, flags);
if (hp->index < MAX_NR_HVC_CONSOLES) {
- console_lock();
vtermnos[hp->index] = -1;
cons_ops[hp->index] = NULL;
- console_unlock();
}
/* Don't whack hp->irq because tty_hangup() will need to free the irq. */
spin_unlock_irqrestore(&hp->lock, flags);
+ console_unlock();
/*
* We 'put' the instance that was grabbed when the kref instance
diff --git a/drivers/tty/hvc/hvcs.c b/drivers/tty/hvc/hvcs.c
index 7823d6d998cf..99bb875178d7 100644
--- a/drivers/tty/hvc/hvcs.c
+++ b/drivers/tty/hvc/hvcs.c
@@ -1575,7 +1575,7 @@ static int __init hvcs_module_init(void)
*/
rc = driver_create_file(&(hvcs_vio_driver.driver), &driver_attr_rescan);
if (rc)
- pr_warning("HVCS: Failed to create rescan file (err %d)\n", rc);
+ pr_warn("HVCS: Failed to create rescan file (err %d)\n", rc);
return 0;
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index 55577cf9b6a4..2667a205a5ab 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -89,18 +89,14 @@ module_param(debug, int, 0600);
/**
* struct gsm_mux_net - network interface
* @struct gsm_dlci* dlci
- * @struct net_device_stats stats;
*
* Created when net interface is initialized.
**/
struct gsm_mux_net {
struct kref ref;
struct gsm_dlci *dlci;
- struct net_device_stats stats;
};
-#define STATS(net) (((struct gsm_mux_net *)netdev_priv(net))->stats)
-
/*
* Each block of data we have queued to go out is in the form of
* a gsm_msg which holds everything we need in a link layer independent
@@ -2613,10 +2609,6 @@ static int gsm_mux_net_close(struct net_device *net)
return 0;
}
-static struct net_device_stats *gsm_mux_net_get_stats(struct net_device *net)
-{
- return &((struct gsm_mux_net *)netdev_priv(net))->stats;
-}
static void dlci_net_free(struct gsm_dlci *dlci)
{
if (!dlci->net) {
@@ -2660,8 +2652,8 @@ static int gsm_mux_net_start_xmit(struct sk_buff *skb,
muxnet_get(mux_net);
skb_queue_head(&dlci->skb_list, skb);
- STATS(net).tx_packets++;
- STATS(net).tx_bytes += skb->len;
+ net->stats.tx_packets++;
+ net->stats.tx_bytes += skb->len;
gsm_dlci_data_kick(dlci);
/* And tell the kernel when the last transmit started. */
netif_trans_update(net);
@@ -2676,7 +2668,7 @@ static void gsm_mux_net_tx_timeout(struct net_device *net)
dev_dbg(&net->dev, "Tx timed out.\n");
/* Update statistics */
- STATS(net).tx_errors++;
+ net->stats.tx_errors++;
}
static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
@@ -2691,7 +2683,7 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
skb = dev_alloc_skb(size + NET_IP_ALIGN);
if (!skb) {
/* We got no receive buffer. */
- STATS(net).rx_dropped++;
+ net->stats.rx_dropped++;
muxnet_put(mux_net);
return;
}
@@ -2705,8 +2697,8 @@ static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
netif_rx(skb);
/* update out statistics */
- STATS(net).rx_packets++;
- STATS(net).rx_bytes += size;
+ net->stats.rx_packets++;
+ net->stats.rx_bytes += size;
muxnet_put(mux_net);
return;
}
@@ -2718,7 +2710,6 @@ static void gsm_mux_net_init(struct net_device *net)
.ndo_stop = gsm_mux_net_close,
.ndo_start_xmit = gsm_mux_net_start_xmit,
.ndo_tx_timeout = gsm_mux_net_tx_timeout,
- .ndo_get_stats = gsm_mux_net_get_stats,
};
net->netdev_ops = &gsm_netdev_ops;
diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c
index 66b59a15780d..65799575c666 100644
--- a/drivers/tty/pty.c
+++ b/drivers/tty/pty.c
@@ -216,16 +216,11 @@ static int pty_signal(struct tty_struct *tty, int sig)
static void pty_flush_buffer(struct tty_struct *tty)
{
struct tty_struct *to = tty->link;
- struct tty_ldisc *ld;
if (!to)
return;
- ld = tty_ldisc_ref(to);
- tty_buffer_flush(to, ld);
- if (ld)
- tty_ldisc_deref(ld);
-
+ tty_buffer_flush(to, NULL);
if (to->packet) {
spin_lock_irq(&tty->ctrl_lock);
tty->ctrl_status |= TIOCPKT_FLUSHWRITE;
diff --git a/drivers/tty/serdev/core.c b/drivers/tty/serdev/core.c
index 1c4829a56351..433de5ea9b02 100644
--- a/drivers/tty/serdev/core.c
+++ b/drivers/tty/serdev/core.c
@@ -116,17 +116,41 @@ void serdev_device_close(struct serdev_device *serdev)
}
EXPORT_SYMBOL_GPL(serdev_device_close);
-int serdev_device_write_buf(struct serdev_device *serdev,
- const unsigned char *buf, size_t count)
+void serdev_device_write_wakeup(struct serdev_device *serdev)
+{
+ complete(&serdev->write_comp);
+}
+EXPORT_SYMBOL_GPL(serdev_device_write_wakeup);
+
+int serdev_device_write(struct serdev_device *serdev,
+ const unsigned char *buf, size_t count,
+ unsigned long timeout)
{
struct serdev_controller *ctrl = serdev->ctrl;
+ int ret;
- if (!ctrl || !ctrl->ops->write_buf)
+ if (!ctrl || !ctrl->ops->write_buf ||
+ (timeout && !serdev->ops->write_wakeup))
return -EINVAL;
- return ctrl->ops->write_buf(ctrl, buf, count);
+ mutex_lock(&serdev->write_lock);
+ do {
+ reinit_completion(&serdev->write_comp);
+
+ ret = ctrl->ops->write_buf(ctrl, buf, count);
+ if (ret < 0)
+ break;
+
+ buf += ret;
+ count -= ret;
+
+ } while (count &&
+ (timeout = wait_for_completion_timeout(&serdev->write_comp,
+ timeout)));
+ mutex_unlock(&serdev->write_lock);
+ return ret < 0 ? ret : (count ? -ETIMEDOUT : 0);
}
-EXPORT_SYMBOL_GPL(serdev_device_write_buf);
+EXPORT_SYMBOL_GPL(serdev_device_write);
void serdev_device_write_flush(struct serdev_device *serdev)
{
@@ -262,6 +286,8 @@ struct serdev_device *serdev_device_alloc(struct serdev_controller *ctrl)
serdev->dev.parent = &ctrl->dev;
serdev->dev.bus = &serdev_bus_type;
serdev->dev.type = &serdev_device_type;
+ init_completion(&serdev->write_comp);
+ mutex_init(&serdev->write_lock);
return serdev;
}
EXPORT_SYMBOL_GPL(serdev_device_alloc);
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index 76e03a7de9cc..48a07e2f617f 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -218,7 +218,7 @@ static int serial_link_irq_chain(struct uart_8250_port *up)
spin_unlock_irq(&i->lock);
irq_flags |= up->port.irqflags;
ret = request_irq(up->port.irq, serial8250_interrupt,
- irq_flags, "serial", i);
+ irq_flags, up->port.name, i);
if (ret < 0)
serial_do_unlink(i, up);
}
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index e65808c482f1..787b1160d3a5 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -530,12 +530,11 @@ static int dw8250_probe(struct platform_device *pdev)
}
data->rst = devm_reset_control_get_optional(dev, NULL);
- if (IS_ERR(data->rst) && PTR_ERR(data->rst) == -EPROBE_DEFER) {
- err = -EPROBE_DEFER;
+ if (IS_ERR(data->rst)) {
+ err = PTR_ERR(data->rst);
goto err_pclk;
}
- if (!IS_ERR(data->rst))
- reset_control_deassert(data->rst);
+ reset_control_deassert(data->rst);
dw8250_quirks(p, data);
@@ -567,8 +566,7 @@ static int dw8250_probe(struct platform_device *pdev)
return 0;
err_reset:
- if (!IS_ERR(data->rst))
- reset_control_assert(data->rst);
+ reset_control_assert(data->rst);
err_pclk:
if (!IS_ERR(data->pclk))
@@ -589,8 +587,7 @@ static int dw8250_remove(struct platform_device *pdev)
serial8250_unregister_port(data->line);
- if (!IS_ERR(data->rst))
- reset_control_assert(data->rst);
+ reset_control_assert(data->rst);
if (!IS_ERR(data->pclk))
clk_disable_unprepare(data->pclk);
diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c
index 85a12f032402..82fc48eca1df 100644
--- a/drivers/tty/serial/8250/8250_early.c
+++ b/drivers/tty/serial/8250/8250_early.c
@@ -39,6 +39,7 @@
static unsigned int __init serial8250_early_in(struct uart_port *port, int offset)
{
+ int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
@@ -52,6 +53,8 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
return ioread32be(port->membase + offset);
case UPIO_PORT:
return inb(port->iobase + offset);
+ case UPIO_AU:
+ return port->serial_in(port, reg_offset);
default:
return 0;
}
@@ -59,6 +62,7 @@ static unsigned int __init serial8250_early_in(struct uart_port *port, int offse
static void __init serial8250_early_out(struct uart_port *port, int offset, int value)
{
+ int reg_offset = offset;
offset <<= port->regshift;
switch (port->iotype) {
@@ -77,6 +81,9 @@ static void __init serial8250_early_out(struct uart_port *port, int offset, int
case UPIO_PORT:
outb(value, port->iobase + offset);
break;
+ case UPIO_AU:
+ port->serial_out(port, reg_offset, value);
+ break;
}
}
@@ -172,3 +179,20 @@ OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
#endif
+
+#ifdef CONFIG_SERIAL_8250_RT288X
+
+unsigned int au_serial_in(struct uart_port *p, int offset);
+void au_serial_out(struct uart_port *p, int offset, int value);
+
+static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
+{
+ dev->port.serial_in = au_serial_in;
+ dev->port.serial_out = au_serial_out;
+ dev->port.iotype = UPIO_AU;
+ dev->con->write = early_serial8250_write;
+ return 0;
+}
+OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
+
+#endif
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b89c4ffc0486..1270ff163f63 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -483,5 +483,5 @@ static struct pci_driver exar_pci_driver = {
module_pci_driver(exar_pci_driver);
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Exar Serial Dricer");
+MODULE_DESCRIPTION("Exar Serial Driver");
MODULE_AUTHOR("Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>");
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index b67e7a544935..e500f7dd2470 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -61,6 +61,12 @@
* The IRQ setting mode of F81866 is not the same with F81216 series.
* Level/Low: IRQ_MODE0:0, IRQ_MODE1:0
* Edge/High: IRQ_MODE0:1, IRQ_MODE1:0
+ *
+ * Clock speeds for UART (register F2h)
+ * 00: 1.8432MHz.
+ * 01: 18.432MHz.
+ * 10: 24MHz.
+ * 11: 14.769MHz.
*/
#define F81866_IRQ_MODE 0xf0
#define F81866_IRQ_SHARE BIT(0)
@@ -72,6 +78,13 @@
#define F81866_LDN_LOW 0x10
#define F81866_LDN_HIGH 0x16
+#define F81866_UART_CLK 0xF2
+#define F81866_UART_CLK_MASK (BIT(1) | BIT(0))
+#define F81866_UART_CLK_1_8432MHZ 0
+#define F81866_UART_CLK_14_769MHZ (BIT(1) | BIT(0))
+#define F81866_UART_CLK_18_432MHZ BIT(0)
+#define F81866_UART_CLK_24MHZ BIT(1)
+
struct fintek_8250 {
u16 pid;
u16 base_port;
@@ -256,8 +269,26 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
}
}
-static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
- unsigned int irq)
+static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
+ struct fintek_8250 *pdata)
+{
+ sio_write_reg(pdata, LDN, pdata->index);
+
+ switch (pdata->pid) {
+ case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
+ sio_write_mask_reg(pdata, F81866_UART_CLK,
+ F81866_UART_CLK_MASK,
+ F81866_UART_CLK_14_769MHZ);
+
+ uart->port.uartclk = 921600 * 16;
+ break;
+ default: /* leave clock speed untouched */
+ break;
+ }
+}
+
+static int probe_setup_port(struct fintek_8250 *pdata,
+ struct uart_8250_port *uart)
{
static const u16 addr[] = {0x4e, 0x2e};
static const u8 keys[] = {0x77, 0xa0, 0x87, 0x67};
@@ -284,18 +315,20 @@ static int probe_setup_port(struct fintek_8250 *pdata, u16 io_address,
sio_write_reg(pdata, LDN, k);
aux = sio_read_reg(pdata, IO_ADDR1);
aux |= sio_read_reg(pdata, IO_ADDR2) << 8;
- if (aux != io_address)
+ if (aux != uart->port.iobase)
continue;
pdata->index = k;
- irq_data = irq_get_irq_data(irq);
+ irq_data = irq_get_irq_data(uart->port.irq);
if (irq_data)
level_mode =
irqd_is_level_type(irq_data);
fintek_8250_set_irq_mode(pdata, level_mode);
fintek_8250_set_max_fifo(pdata);
+ fintek_8250_goto_highspeed(uart, pdata);
+
fintek_8250_exit_key(addr[i]);
return 0;
@@ -330,7 +363,7 @@ int fintek_8250_probe(struct uart_8250_port *uart)
struct fintek_8250 *pdata;
struct fintek_8250 probe_data;
- if (probe_setup_port(&probe_data, uart->port.iobase, uart->port.irq))
+ if (probe_setup_port(&probe_data, uart))
return -ENODEV;
pdata = devm_kzalloc(uart->port.dev, sizeof(*pdata), GFP_KERNEL);
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index f3ea90f0e411..7dddd7e6a01c 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -183,7 +183,6 @@ static void qrk_serial_setup_dma(struct lpss8250 *lpss, struct uart_port *port)
if (ret)
return;
- pci_set_master(pdev);
pci_try_set_mwi(pdev);
/* Special DMA address for UART */
@@ -216,6 +215,8 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
struct pci_dev *pdev = to_pci_dev(port->dev);
int ret;
+ pci_set_master(pdev);
+
ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 6119516ef5fc..09a65a3ec7f7 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -328,7 +328,7 @@ static const s8 au_io_out_map[8] = {
-1, /* UART_SCR (unmapped) */
};
-static unsigned int au_serial_in(struct uart_port *p, int offset)
+unsigned int au_serial_in(struct uart_port *p, int offset)
{
if (offset >= ARRAY_SIZE(au_io_in_map))
return UINT_MAX;
@@ -338,7 +338,7 @@ static unsigned int au_serial_in(struct uart_port *p, int offset)
return __raw_readl(p->membase + (offset << p->regshift));
}
-static void au_serial_out(struct uart_port *p, int offset, int value)
+void au_serial_out(struct uart_port *p, int offset, int value)
{
if (offset >= ARRAY_SIZE(au_io_out_map))
return;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6117ac8da48f..5c8850f7a2a0 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -630,6 +630,15 @@ config SERIAL_UARTLITE_CONSOLE
console (the system console is the device which receives all kernel
messages and warnings and which allows logins in single user mode).
+config SERIAL_UARTLITE_NR_UARTS
+ int "Maximum number of uartlite serial ports"
+ depends on SERIAL_UARTLITE
+ range 1 256
+ default 1
+ help
+ Set this to the number of uartlites in your system, or the number
+ you think you might implement.
+
config SERIAL_SUNCORE
bool
depends on SPARC
@@ -1343,6 +1352,7 @@ config SERIAL_ALTERA_JTAGUART_CONSOLE
bool "Altera JTAG UART console support"
depends on SERIAL_ALTERA_JTAGUART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Enable a Altera JTAG UART port to be the system console.
@@ -1382,6 +1392,7 @@ config SERIAL_ALTERA_UART_CONSOLE
bool "Altera UART console support"
depends on SERIAL_ALTERA_UART=y
select SERIAL_CORE_CONSOLE
+ select SERIAL_EARLYCON
help
Enable a Altera UART port to be the system console.
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index 2d6288bc4554..53c03e005132 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -3,7 +3,6 @@
#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
-obj-$(CONFIG_SERIAL_21285) += 21285.o
obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o
obj-$(CONFIG_SERIAL_EARLYCON_ARM_SEMIHOST) += earlycon-arm-semihost.o
@@ -17,6 +16,8 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o
obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o
obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o
+obj-$(CONFIG_SERIAL_21285) += 21285.o
+
# Now bring in any enabled 8250/16450/16550 type drivers.
obj-$(CONFIG_SERIAL_8250) += 8250/
diff --git a/drivers/tty/serial/altera_jtaguart.c b/drivers/tty/serial/altera_jtaguart.c
index e409d7dac7ab..18e3f8342b85 100644
--- a/drivers/tty/serial/altera_jtaguart.c
+++ b/drivers/tty/serial/altera_jtaguart.c
@@ -383,6 +383,26 @@ console_initcall(altera_jtaguart_console_init);
#define ALTERA_JTAGUART_CONSOLE (&altera_jtaguart_console)
+static void altera_jtaguart_earlycon_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ uart_console_write(&dev->port, s, count, altera_jtaguart_console_putc);
+}
+
+static int __init altera_jtaguart_earlycon_setup(struct earlycon_device *dev,
+ const char *options)
+{
+ if (!dev->port.membase)
+ return -ENODEV;
+
+ dev->con->write = altera_jtaguart_earlycon_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(juart, "altr,juart-1.0", altera_jtaguart_earlycon_setup);
+
#else
#define ALTERA_JTAGUART_CONSOLE NULL
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index 820a74208696..46d3438a0d27 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -489,6 +489,38 @@ console_initcall(altera_uart_console_init);
#define ALTERA_UART_CONSOLE (&altera_uart_console)
+static void altera_uart_earlycon_write(struct console *co, const char *s,
+ unsigned int count)
+{
+ struct earlycon_device *dev = co->data;
+
+ uart_console_write(&dev->port, s, count, altera_uart_console_putc);
+}
+
+static int __init altera_uart_earlycon_setup(struct earlycon_device *dev,
+ const char *options)
+{
+ struct uart_port *port = &dev->port;
+
+ if (!port->membase)
+ return -ENODEV;
+
+ /* Enable RX interrupts now */
+ writel(ALTERA_UART_CONTROL_RRDY_MSK,
+ port->membase + ALTERA_UART_CONTROL_REG);
+
+ if (dev->baud) {
+ unsigned int baudclk = port->uartclk / dev->baud;
+
+ writel(baudclk, port->membase + ALTERA_UART_DIVISOR_REG);
+ }
+
+ dev->con->write = altera_uart_earlycon_write;
+ return 0;
+}
+
+OF_EARLYCON_DECLARE(uart, "altr,uart-1.0", altera_uart_earlycon_setup);
+
#else
#define ALTERA_UART_CONSOLE NULL
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index b0a377725d63..8a857bb34fbb 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1327,14 +1327,15 @@ static void pl011_stop_tx(struct uart_port *port)
pl011_dma_tx_stop(uap);
}
-static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
+static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq);
/* Start TX with programmed I/O only (no DMA) */
static void pl011_start_tx_pio(struct uart_amba_port *uap)
{
- uap->im |= UART011_TXIM;
- pl011_write(uap->im, uap, REG_IMSC);
- pl011_tx_chars(uap, false);
+ if (pl011_tx_chars(uap, false)) {
+ uap->im |= UART011_TXIM;
+ pl011_write(uap->im, uap, REG_IMSC);
+ }
}
static void pl011_start_tx(struct uart_port *port)
@@ -1414,25 +1415,26 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c,
return true;
}
-static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
+/* Returns true if tx interrupts have to be (kept) enabled */
+static bool pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
{
struct circ_buf *xmit = &uap->port.state->xmit;
int count = uap->fifosize >> 1;
if (uap->port.x_char) {
if (!pl011_tx_char(uap, uap->port.x_char, from_irq))
- return;
+ return true;
uap->port.x_char = 0;
--count;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
pl011_stop_tx(&uap->port);
- return;
+ return false;
}
/* If we are using DMA mode, try to send some characters. */
if (pl011_dma_tx_irq(uap))
- return;
+ return true;
do {
if (likely(from_irq) && count-- == 0)
@@ -1447,8 +1449,11 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq)
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&uap->port);
- if (uart_circ_empty(xmit))
+ if (uart_circ_empty(xmit)) {
pl011_stop_tx(&uap->port);
+ return false;
+ }
+ return true;
}
static void pl011_modem_status(struct uart_amba_port *uap)
@@ -2470,19 +2475,34 @@ static int __init pl011_early_console_setup(struct earlycon_device *device,
if (!device->port.membase)
return -ENODEV;
- /* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must
- * also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44".
- */
- if (!strcmp(device->options, "qdf2400_e44"))
- device->con->write = qdf2400_e44_early_write;
- else
- device->con->write = pl011_early_write;
+ device->con->write = pl011_early_write;
return 0;
}
OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup);
OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup);
-EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup);
+
+/*
+ * On Qualcomm Datacenter Technologies QDF2400 SOCs affected by
+ * Erratum 44, traditional earlycon can be enabled by specifying
+ * "earlycon=qdf2400_e44,<address>". Any options are ignored.
+ *
+ * Alternatively, you can just specify "earlycon", and the early console
+ * will be enabled with the information from the SPCR table. In this
+ * case, the SPCR code will detect the need for the E44 work-around,
+ * and set the console name to "qdf2400_e44".
+ */
+static int __init
+qdf2400_e44_early_console_setup(struct earlycon_device *device,
+ const char *opt)
+{
+ if (!device->port.membase)
+ return -ENODEV;
+
+ device->con->write = qdf2400_e44_early_write;
+ return 0;
+}
+EARLYCON_DECLARE(qdf2400_e44, qdf2400_e44_early_console_setup);
#else
#define AMBA_CONSOLE NULL
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 1f50a83ef958..c355ac9abafc 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -38,7 +38,6 @@
#include <linux/dma-mapping.h>
#include <linux/dmaengine.h>
#include <linux/atmel_pdc.h>
-#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
@@ -71,6 +70,7 @@
#include <linux/serial_core.h>
#include "serial_mctrl_gpio.h"
+#include "atmel_serial.h"
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
@@ -119,8 +119,9 @@ struct atmel_uart_char {
/*
* at91: 6 USARTs and one DBGU port (SAM9260)
* avr32: 4
+ * samx7: 3 USARTs and 5 UARTs
*/
-#define ATMEL_MAX_UART 7
+#define ATMEL_MAX_UART 8
/*
* We wrap our port structure around the generic uart_port.
@@ -175,6 +176,7 @@ struct atmel_uart_port {
unsigned int pending_status;
spinlock_t lock_suspended;
+#ifdef CONFIG_PM
struct {
u32 cr;
u32 mr;
@@ -185,6 +187,7 @@ struct atmel_uart_port {
u32 fmr;
u32 fimr;
} cache;
+#endif
int (*prepare_rx)(struct uart_port *port);
int (*prepare_tx)(struct uart_port *port);
diff --git a/drivers/tty/serial/atmel_serial.h b/drivers/tty/serial/atmel_serial.h
new file mode 100644
index 000000000000..bd2560502f3c
--- /dev/null
+++ b/drivers/tty/serial/atmel_serial.h
@@ -0,0 +1,169 @@
+/*
+ * include/linux/atmel_serial.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * USART registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef ATMEL_SERIAL_H
+#define ATMEL_SERIAL_H
+
+#define ATMEL_US_CR 0x00 /* Control Register */
+#define ATMEL_US_RSTRX BIT(2) /* Reset Receiver */
+#define ATMEL_US_RSTTX BIT(3) /* Reset Transmitter */
+#define ATMEL_US_RXEN BIT(4) /* Receiver Enable */
+#define ATMEL_US_RXDIS BIT(5) /* Receiver Disable */
+#define ATMEL_US_TXEN BIT(6) /* Transmitter Enable */
+#define ATMEL_US_TXDIS BIT(7) /* Transmitter Disable */
+#define ATMEL_US_RSTSTA BIT(8) /* Reset Status Bits */
+#define ATMEL_US_STTBRK BIT(9) /* Start Break */
+#define ATMEL_US_STPBRK BIT(10) /* Stop Break */
+#define ATMEL_US_STTTO BIT(11) /* Start Time-out */
+#define ATMEL_US_SENDA BIT(12) /* Send Address */
+#define ATMEL_US_RSTIT BIT(13) /* Reset Iterations */
+#define ATMEL_US_RSTNACK BIT(14) /* Reset Non Acknowledge */
+#define ATMEL_US_RETTO BIT(15) /* Rearm Time-out */
+#define ATMEL_US_DTREN BIT(16) /* Data Terminal Ready Enable */
+#define ATMEL_US_DTRDIS BIT(17) /* Data Terminal Ready Disable */
+#define ATMEL_US_RTSEN BIT(18) /* Request To Send Enable */
+#define ATMEL_US_RTSDIS BIT(19) /* Request To Send Disable */
+#define ATMEL_US_TXFCLR BIT(24) /* Transmit FIFO Clear */
+#define ATMEL_US_RXFCLR BIT(25) /* Receive FIFO Clear */
+#define ATMEL_US_TXFLCLR BIT(26) /* Transmit FIFO Lock Clear */
+#define ATMEL_US_FIFOEN BIT(30) /* FIFO enable */
+#define ATMEL_US_FIFODIS BIT(31) /* FIFO disable */
+
+#define ATMEL_US_MR 0x04 /* Mode Register */
+#define ATMEL_US_USMODE GENMASK(3, 0) /* Mode of the USART */
+#define ATMEL_US_USMODE_NORMAL 0
+#define ATMEL_US_USMODE_RS485 1
+#define ATMEL_US_USMODE_HWHS 2
+#define ATMEL_US_USMODE_MODEM 3
+#define ATMEL_US_USMODE_ISO7816_T0 4
+#define ATMEL_US_USMODE_ISO7816_T1 6
+#define ATMEL_US_USMODE_IRDA 8
+#define ATMEL_US_USCLKS GENMASK(5, 4) /* Clock Selection */
+#define ATMEL_US_USCLKS_MCK (0 << 4)
+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
+#define ATMEL_US_USCLKS_SCK (3 << 4)
+#define ATMEL_US_CHRL GENMASK(7, 6) /* Character Length */
+#define ATMEL_US_CHRL_5 (0 << 6)
+#define ATMEL_US_CHRL_6 (1 << 6)
+#define ATMEL_US_CHRL_7 (2 << 6)
+#define ATMEL_US_CHRL_8 (3 << 6)
+#define ATMEL_US_SYNC BIT(8) /* Synchronous Mode Select */
+#define ATMEL_US_PAR GENMASK(11, 9) /* Parity Type */
+#define ATMEL_US_PAR_EVEN (0 << 9)
+#define ATMEL_US_PAR_ODD (1 << 9)
+#define ATMEL_US_PAR_SPACE (2 << 9)
+#define ATMEL_US_PAR_MARK (3 << 9)
+#define ATMEL_US_PAR_NONE (4 << 9)
+#define ATMEL_US_PAR_MULTI_DROP (6 << 9)
+#define ATMEL_US_NBSTOP GENMASK(13, 12) /* Number of Stop Bits */
+#define ATMEL_US_NBSTOP_1 (0 << 12)
+#define ATMEL_US_NBSTOP_1_5 (1 << 12)
+#define ATMEL_US_NBSTOP_2 (2 << 12)
+#define ATMEL_US_CHMODE GENMASK(15, 14) /* Channel Mode */
+#define ATMEL_US_CHMODE_NORMAL (0 << 14)
+#define ATMEL_US_CHMODE_ECHO (1 << 14)
+#define ATMEL_US_CHMODE_LOC_LOOP (2 << 14)
+#define ATMEL_US_CHMODE_REM_LOOP (3 << 14)
+#define ATMEL_US_MSBF BIT(16) /* Bit Order */
+#define ATMEL_US_MODE9 BIT(17) /* 9-bit Character Length */
+#define ATMEL_US_CLKO BIT(18) /* Clock Output Select */
+#define ATMEL_US_OVER BIT(19) /* Oversampling Mode */
+#define ATMEL_US_INACK BIT(20) /* Inhibit Non Acknowledge */
+#define ATMEL_US_DSNACK BIT(21) /* Disable Successive NACK */
+#define ATMEL_US_MAX_ITER GENMASK(26, 24) /* Max Iterations */
+#define ATMEL_US_FILTER BIT(28) /* Infrared Receive Line Filter */
+
+#define ATMEL_US_IER 0x08 /* Interrupt Enable Register */
+#define ATMEL_US_RXRDY BIT(0) /* Receiver Ready */
+#define ATMEL_US_TXRDY BIT(1) /* Transmitter Ready */
+#define ATMEL_US_RXBRK BIT(2) /* Break Received / End of Break */
+#define ATMEL_US_ENDRX BIT(3) /* End of Receiver Transfer */
+#define ATMEL_US_ENDTX BIT(4) /* End of Transmitter Transfer */
+#define ATMEL_US_OVRE BIT(5) /* Overrun Error */
+#define ATMEL_US_FRAME BIT(6) /* Framing Error */
+#define ATMEL_US_PARE BIT(7) /* Parity Error */
+#define ATMEL_US_TIMEOUT BIT(8) /* Receiver Time-out */
+#define ATMEL_US_TXEMPTY BIT(9) /* Transmitter Empty */
+#define ATMEL_US_ITERATION BIT(10) /* Max number of Repetitions Reached */
+#define ATMEL_US_TXBUFE BIT(11) /* Transmission Buffer Empty */
+#define ATMEL_US_RXBUFF BIT(12) /* Reception Buffer Full */
+#define ATMEL_US_NACK BIT(13) /* Non Acknowledge */
+#define ATMEL_US_RIIC BIT(16) /* Ring Indicator Input Change */
+#define ATMEL_US_DSRIC BIT(17) /* Data Set Ready Input Change */
+#define ATMEL_US_DCDIC BIT(18) /* Data Carrier Detect Input Change */
+#define ATMEL_US_CTSIC BIT(19) /* Clear to Send Input Change */
+#define ATMEL_US_RI BIT(20) /* RI */
+#define ATMEL_US_DSR BIT(21) /* DSR */
+#define ATMEL_US_DCD BIT(22) /* DCD */
+#define ATMEL_US_CTS BIT(23) /* CTS */
+
+#define ATMEL_US_IDR 0x0c /* Interrupt Disable Register */
+#define ATMEL_US_IMR 0x10 /* Interrupt Mask Register */
+#define ATMEL_US_CSR 0x14 /* Channel Status Register */
+#define ATMEL_US_RHR 0x18 /* Receiver Holding Register */
+#define ATMEL_US_THR 0x1c /* Transmitter Holding Register */
+#define ATMEL_US_SYNH BIT(15) /* Transmit/Receive Sync */
+
+#define ATMEL_US_BRGR 0x20 /* Baud Rate Generator Register */
+#define ATMEL_US_CD GENMASK(15, 0) /* Clock Divider */
+#define ATMEL_US_FP_OFFSET 16 /* Fractional Part */
+#define ATMEL_US_FP_MASK 0x7
+
+#define ATMEL_US_RTOR 0x24 /* Receiver Time-out Register for USART */
+#define ATMEL_UA_RTOR 0x28 /* Receiver Time-out Register for UART */
+#define ATMEL_US_TO GENMASK(15, 0) /* Time-out Value */
+
+#define ATMEL_US_TTGR 0x28 /* Transmitter Timeguard Register */
+#define ATMEL_US_TG GENMASK(7, 0) /* Timeguard Value */
+
+#define ATMEL_US_FIDI 0x40 /* FI DI Ratio Register */
+#define ATMEL_US_NER 0x44 /* Number of Errors Register */
+#define ATMEL_US_IF 0x4c /* IrDA Filter Register */
+
+#define ATMEL_US_CMPR 0x90 /* Comparaison Register */
+#define ATMEL_US_FMR 0xa0 /* FIFO Mode Register */
+#define ATMEL_US_TXRDYM(data) (((data) & 0x3) << 0) /* TX Ready Mode */
+#define ATMEL_US_RXRDYM(data) (((data) & 0x3) << 4) /* RX Ready Mode */
+#define ATMEL_US_ONE_DATA 0x0
+#define ATMEL_US_TWO_DATA 0x1
+#define ATMEL_US_FOUR_DATA 0x2
+#define ATMEL_US_FRTSC BIT(7) /* FIFO RTS pin Control */
+#define ATMEL_US_TXFTHRES(thr) (((thr) & 0x3f) << 8) /* TX FIFO Threshold */
+#define ATMEL_US_RXFTHRES(thr) (((thr) & 0x3f) << 16) /* RX FIFO Threshold */
+#define ATMEL_US_RXFTHRES2(thr) (((thr) & 0x3f) << 24) /* RX FIFO Threshold2 */
+
+#define ATMEL_US_FLR 0xa4 /* FIFO Level Register */
+#define ATMEL_US_TXFL(reg) (((reg) >> 0) & 0x3f) /* TX FIFO Level */
+#define ATMEL_US_RXFL(reg) (((reg) >> 16) & 0x3f) /* RX FIFO Level */
+
+#define ATMEL_US_FIER 0xa8 /* FIFO Interrupt Enable Register */
+#define ATMEL_US_FIDR 0xac /* FIFO Interrupt Disable Register */
+#define ATMEL_US_FIMR 0xb0 /* FIFO Interrupt Mask Register */
+#define ATMEL_US_FESR 0xb4 /* FIFO Event Status Register */
+#define ATMEL_US_TXFEF BIT(0) /* Transmit FIFO Empty Flag */
+#define ATMEL_US_TXFFF BIT(1) /* Transmit FIFO Full Flag */
+#define ATMEL_US_TXFTHF BIT(2) /* Transmit FIFO Threshold Flag */
+#define ATMEL_US_RXFEF BIT(3) /* Receive FIFO Empty Flag */
+#define ATMEL_US_RXFFF BIT(4) /* Receive FIFO Full Flag */
+#define ATMEL_US_RXFTHF BIT(5) /* Receive FIFO Threshold Flag */
+#define ATMEL_US_TXFPTEF BIT(6) /* Transmit FIFO Pointer Error Flag */
+#define ATMEL_US_RXFPTEF BIT(7) /* Receive FIFO Pointer Error Flag */
+#define ATMEL_US_TXFLOCK BIT(8) /* Transmit FIFO Lock (FESR only) */
+#define ATMEL_US_RXFTHF2 BIT(9) /* Receive FIFO Threshold Flag 2 */
+
+#define ATMEL_US_NAME 0xf0 /* Ip Name */
+#define ATMEL_US_VERSION 0xfc /* Ip Version */
+
+#endif
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index f02934ffb329..15df1ba78095 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1705,6 +1705,13 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned char old_cr2, cr2;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr2 = old_cr2 = readb(sport->port.membase + UARTCR2);
@@ -1719,6 +1726,9 @@ lpuart_console_write(struct console *co, const char *s, unsigned int count)
barrier();
writeb(old_cr2, sport->port.membase + UARTCR2);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
static void
@@ -1726,6 +1736,13 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
{
struct lpuart_port *sport = lpuart_ports[co->index];
unsigned long old_cr, cr;
+ unsigned long flags;
+ int locked = 1;
+
+ if (sport->port.sysrq || oops_in_progress)
+ locked = spin_trylock_irqsave(&sport->port.lock, flags);
+ else
+ spin_lock_irqsave(&sport->port.lock, flags);
/* first save CR2 and then disable interrupts */
cr = old_cr = lpuart32_read(sport->port.membase + UARTCTRL);
@@ -1740,6 +1757,9 @@ lpuart32_console_write(struct console *co, const char *s, unsigned int count)
barrier();
lpuart32_write(old_cr, sport->port.membase + UARTCTRL);
+
+ if (locked)
+ spin_unlock_irqrestore(&sport->port.lock, flags);
}
/*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e3e152cbc75e..33509b4beaec 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -719,6 +719,27 @@ out:
return IRQ_HANDLED;
}
+static void imx_disable_rx_int(struct imx_port *sport)
+{
+ unsigned long temp;
+
+ sport->dma_is_rxing = 1;
+
+ /* disable the receiver ready and aging timer interrupts */
+ temp = readl(sport->port.membase + UCR1);
+ temp &= ~(UCR1_RRDYEN);
+ writel(temp, sport->port.membase + UCR1);
+
+ temp = readl(sport->port.membase + UCR2);
+ temp &= ~(UCR2_ATEN);
+ writel(temp, sport->port.membase + UCR2);
+
+ /* disable the rx errors interrupts */
+ temp = readl(sport->port.membase + UCR4);
+ temp &= ~UCR4_OREN;
+ writel(temp, sport->port.membase + UCR4);
+}
+
static void clear_rx_errors(struct imx_port *sport);
static int start_rx_dma(struct imx_port *sport);
/*
@@ -734,21 +755,8 @@ static void imx_dma_rxint(struct imx_port *sport)
temp = readl(sport->port.membase + USR2);
if ((temp & USR2_RDR) && !sport->dma_is_rxing) {
- sport->dma_is_rxing = 1;
- /* disable the receiver ready and aging timer interrupts */
- temp = readl(sport->port.membase + UCR1);
- temp &= ~(UCR1_RRDYEN);
- writel(temp, sport->port.membase + UCR1);
-
- temp = readl(sport->port.membase + UCR2);
- temp &= ~(UCR2_ATEN);
- writel(temp, sport->port.membase + UCR2);
-
- /* disable the rx errors interrupts */
- temp = readl(sport->port.membase + UCR4);
- temp &= ~UCR4_OREN;
- writel(temp, sport->port.membase + UCR4);
+ imx_disable_rx_int(sport);
/* tell the DMA to receive the data. */
start_rx_dma(sport);
@@ -1317,19 +1325,10 @@ static int imx_startup(struct uart_port *port)
if (!is_imx1_uart(sport)) {
temp = readl(sport->port.membase + UCR3);
- /*
- * The effect of RI and DCD differs depending on the UFCR_DCEDTE
- * bit. In DCE mode they control the outputs, in DTE mode they
- * enable the respective irqs. At least the DCD irq cannot be
- * cleared on i.MX25 at least, so it's not usable and must be
- * disabled. I don't have test hardware to check if RI has the
- * same problem but I consider this likely so it's disabled for
- * now, too.
- */
- temp |= IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP |
- UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
+ temp |= UCR3_DTRDEN | UCR3_RI | UCR3_DCD;
if (sport->dte_mode)
+ /* disable broken interrupts */
temp &= ~(UCR3_RI | UCR3_DCD);
writel(temp, sport->port.membase + UCR3);
@@ -1339,6 +1338,33 @@ static int imx_startup(struct uart_port *port)
* Enable modem status interrupts
*/
imx_enable_ms(&sport->port);
+
+ /*
+ * If the serial port is opened for reading start RX DMA immediately
+ * instead of waiting for RX FIFO interrupts. In our iMX53 the average
+ * delay for the first reception dropped from approximately 35000
+ * microseconds to 1000 microseconds.
+ */
+ if (sport->dma_is_enabled) {
+ struct tty_struct *tty = sport->port.state->port.tty;
+ struct tty_file_private *file_priv;
+ int readcnt = 0;
+
+ spin_lock(&tty->files_lock);
+
+ if (!list_empty(&tty->tty_files))
+ list_for_each_entry(file_priv, &tty->tty_files, list)
+ if (!(file_priv->file->f_flags & O_WRONLY))
+ readcnt++;
+
+ spin_unlock(&tty->files_lock);
+
+ if (readcnt > 0) {
+ imx_disable_rx_int(sport);
+ start_rx_dma(sport);
+ }
+ }
+
spin_unlock_irqrestore(&sport->port.lock, flags);
return 0;
@@ -1584,8 +1610,6 @@ imx_set_termios(struct uart_port *port, struct ktermios *termios,
ufcr = readl(sport->port.membase + UFCR);
ufcr = (ufcr & (~UFCR_RFDIV)) | UFCR_RFDIV_REG(div);
- if (sport->dte_mode)
- ufcr |= UFCR_DCEDTE;
writel(ufcr, sport->port.membase + UFCR);
writel(num, sport->port.membase + UBIR);
@@ -2153,6 +2177,27 @@ static int serial_imx_probe(struct platform_device *pdev)
UCR1_TXMPTYEN | UCR1_RTSDEN);
writel_relaxed(reg, sport->port.membase + UCR1);
+ if (!is_imx1_uart(sport) && sport->dte_mode) {
+ /*
+ * The DCEDTE bit changes the direction of DSR, DCD, DTR and RI
+ * and influences if UCR3_RI and UCR3_DCD changes the level of RI
+ * and DCD (when they are outputs) or enables the respective
+ * irqs. So set this bit early, i.e. before requesting irqs.
+ */
+ writel(UFCR_DCEDTE, sport->port.membase + UFCR);
+
+ /*
+ * Disable UCR3_RI and UCR3_DCD irqs. They are also not
+ * enabled later because they cannot be cleared
+ * (confirmed on i.MX25) which makes them unusable.
+ */
+ writel(IMX21_UCR3_RXDMUXSEL | UCR3_ADNIMP | UCR3_DSR,
+ sport->port.membase + UCR3);
+
+ } else {
+ writel(0, sport->port.membase + UFCR);
+ }
+
clk_disable_unprepare(sport->clk_ipg);
/*
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index a4734649a0f0..1ea05ac57aa7 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1770,7 +1770,8 @@ static int serial_omap_probe(struct platform_device *pdev)
return 0;
err_add_port:
- pm_runtime_put(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_qos_remove_request(&up->pm_qos_request);
device_init_wakeup(up->dev, false);
@@ -1783,9 +1784,13 @@ static int serial_omap_remove(struct platform_device *dev)
{
struct uart_omap_port *up = platform_get_drvdata(dev);
+ pm_runtime_get_sync(up->dev);
+
+ uart_remove_one_port(&serial_omap_reg, &up->port);
+
+ pm_runtime_dont_use_autosuspend(up->dev);
pm_runtime_put_sync(up->dev);
pm_runtime_disable(up->dev);
- uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
device_init_wakeup(&dev->dev, false);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 7a17aedbf902..8aca18c4cdea 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -859,7 +859,7 @@ static void s3c24xx_serial_break_ctl(struct uart_port *port, int break_state)
static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
{
struct s3c24xx_uart_dma *dma = p->dma;
- unsigned long flags;
+ int ret;
/* Default slave configuration parameters */
dma->rx_conf.direction = DMA_DEV_TO_MEM;
@@ -884,8 +884,8 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->tx_chan = dma_request_chan(p->port.dev, "tx");
if (IS_ERR(dma->tx_chan)) {
- dma_release_channel(dma->rx_chan);
- return PTR_ERR(dma->tx_chan);
+ ret = PTR_ERR(dma->tx_chan);
+ goto err_release_rx;
}
dmaengine_slave_config(dma->tx_chan, &dma->tx_conf);
@@ -894,26 +894,38 @@ static int s3c24xx_serial_request_dma(struct s3c24xx_uart_port *p)
dma->rx_size = PAGE_SIZE;
dma->rx_buf = kmalloc(dma->rx_size, GFP_KERNEL);
-
if (!dma->rx_buf) {
- dma_release_channel(dma->rx_chan);
- dma_release_channel(dma->tx_chan);
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto err_release_tx;
}
- dma->rx_addr = dma_map_single(dma->rx_chan->device->dev, dma->rx_buf,
+ dma->rx_addr = dma_map_single(p->port.dev, dma->rx_buf,
dma->rx_size, DMA_FROM_DEVICE);
-
- spin_lock_irqsave(&p->port.lock, flags);
+ if (dma_mapping_error(p->port.dev, dma->rx_addr)) {
+ ret = -EIO;
+ goto err_free_rx;
+ }
/* TX buffer */
- dma->tx_addr = dma_map_single(dma->tx_chan->device->dev,
- p->port.state->xmit.buf,
+ dma->tx_addr = dma_map_single(p->port.dev, p->port.state->xmit.buf,
UART_XMIT_SIZE, DMA_TO_DEVICE);
-
- spin_unlock_irqrestore(&p->port.lock, flags);
+ if (dma_mapping_error(p->port.dev, dma->tx_addr)) {
+ ret = -EIO;
+ goto err_unmap_rx;
+ }
return 0;
+
+err_unmap_rx:
+ dma_unmap_single(p->port.dev, dma->rx_addr, dma->rx_size,
+ DMA_FROM_DEVICE);
+err_free_rx:
+ kfree(dma->rx_buf);
+err_release_tx:
+ dma_release_channel(dma->tx_chan);
+err_release_rx:
+ dma_release_channel(dma->rx_chan);
+ return ret;
}
static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
@@ -922,7 +934,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->rx_chan) {
dmaengine_terminate_all(dma->rx_chan);
- dma_unmap_single(dma->rx_chan->device->dev, dma->rx_addr,
+ dma_unmap_single(p->port.dev, dma->rx_addr,
dma->rx_size, DMA_FROM_DEVICE);
kfree(dma->rx_buf);
dma_release_channel(dma->rx_chan);
@@ -931,7 +943,7 @@ static void s3c24xx_serial_release_dma(struct s3c24xx_uart_port *p)
if (dma->tx_chan) {
dmaengine_terminate_all(dma->tx_chan);
- dma_unmap_single(dma->tx_chan->device->dev, dma->tx_addr,
+ dma_unmap_single(p->port.dev, dma->tx_addr,
UART_XMIT_SIZE, DMA_TO_DEVICE);
dma_release_channel(dma->tx_chan);
dma->tx_chan = NULL;
diff --git a/drivers/tty/serial/sb1250-duart.c b/drivers/tty/serial/sb1250-duart.c
index 771f361c47ea..041625cc24bb 100644
--- a/drivers/tty/serial/sb1250-duart.c
+++ b/drivers/tty/serial/sb1250-duart.c
@@ -41,7 +41,7 @@
#include <linux/tty_flip.h>
#include <linux/types.h>
-#include <linux/atomic.h>
+#include <linux/refcount.h>
#include <asm/io.h>
#include <asm/war.h>
@@ -103,7 +103,7 @@ struct sbd_port {
struct sbd_duart {
struct sbd_port sport[2];
unsigned long mapctrl;
- atomic_t map_guard;
+ refcount_t map_guard;
};
#define to_sport(uport) container_of(uport, struct sbd_port, port)
@@ -654,15 +654,13 @@ static void sbd_release_port(struct uart_port *uport)
{
struct sbd_port *sport = to_sport(uport);
struct sbd_duart *duart = sport->duart;
- int map_guard;
iounmap(sport->memctrl);
sport->memctrl = NULL;
iounmap(uport->membase);
uport->membase = NULL;
- map_guard = atomic_add_return(-1, &duart->map_guard);
- if (!map_guard)
+ if(refcount_dec_and_test(&duart->map_guard))
release_mem_region(duart->mapctrl, DUART_CHANREG_SPACING);
release_mem_region(uport->mapbase, DUART_CHANREG_SPACING);
}
@@ -698,7 +696,6 @@ static int sbd_request_port(struct uart_port *uport)
{
const char *err = KERN_ERR "sbd: Unable to reserve MMIO resource\n";
struct sbd_duart *duart = to_sport(uport)->duart;
- int map_guard;
int ret = 0;
if (!request_mem_region(uport->mapbase, DUART_CHANREG_SPACING,
@@ -706,11 +703,11 @@ static int sbd_request_port(struct uart_port *uport)
printk(err);
return -EBUSY;
}
- map_guard = atomic_add_return(1, &duart->map_guard);
- if (map_guard == 1) {
+ refcount_inc(&duart->map_guard);
+ if (refcount_read(&duart->map_guard) == 1) {
if (!request_mem_region(duart->mapctrl, DUART_CHANREG_SPACING,
"sb1250-duart")) {
- atomic_add(-1, &duart->map_guard);
+ refcount_dec(&duart->map_guard);
printk(err);
ret = -EBUSY;
}
@@ -718,8 +715,7 @@ static int sbd_request_port(struct uart_port *uport)
if (!ret) {
ret = sbd_map_port(uport);
if (ret) {
- map_guard = atomic_add_return(-1, &duart->map_guard);
- if (!map_guard)
+ if (refcount_dec_and_test(&duart->map_guard))
release_mem_region(duart->mapctrl,
DUART_CHANREG_SPACING);
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 3fe56894974a..0f45b7884a2c 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -2117,9 +2117,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
for (tries = 3; !ops->tx_empty(uport) && tries; tries--)
msleep(10);
if (!tries)
- dev_err(uport->dev, "%s%d: Unable to drain transmitter\n",
- drv->dev_name,
- drv->tty_driver->name_base + uport->line);
+ dev_err(uport->dev, "%s: Unable to drain transmitter\n",
+ uport->name);
ops->shutdown(uport);
}
@@ -2248,11 +2247,10 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port)
break;
}
- printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n",
+ pr_info("%s%s%s at %s (irq = %d, base_baud = %d) is a %s\n",
port->dev ? dev_name(port->dev) : "",
port->dev ? ": " : "",
- drv->dev_name,
- drv->tty_driver->name_base + port->line,
+ port->name,
address, port->irq, port->uartclk / 16, uart_type(port));
}
@@ -2331,9 +2329,6 @@ static int uart_poll_init(struct tty_driver *driver, int line, char *options)
int flow = 'n';
int ret = 0;
- if (!state)
- return -1;
-
tport = &state->port;
mutex_lock(&tport->mutex);
@@ -2368,13 +2363,12 @@ static int uart_poll_get_char(struct tty_driver *driver, int line)
struct uart_port *port;
int ret = -1;
- if (state) {
- port = uart_port_ref(state);
- if (port) {
- ret = port->ops->poll_get_char(port);
- uart_port_deref(port);
- }
+ port = uart_port_ref(state);
+ if (port) {
+ ret = port->ops->poll_get_char(port);
+ uart_port_deref(port);
}
+
return ret;
}
@@ -2384,9 +2378,6 @@ static void uart_poll_put_char(struct tty_driver *driver, int line, char ch)
struct uart_state *state = drv->state + line;
struct uart_port *port;
- if (!state)
- return;
-
port = uart_port_ref(state);
if (!port)
return;
@@ -2751,6 +2742,12 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
state->pm_state = UART_PM_STATE_UNDEFINED;
uport->cons = drv->cons;
uport->minor = drv->tty_driver->minor_start + uport->line;
+ uport->name = kasprintf(GFP_KERNEL, "%s%d", drv->dev_name,
+ drv->tty_driver->name_base + uport->line);
+ if (!uport->name) {
+ ret = -ENOMEM;
+ goto out;
+ }
/*
* If this port is a console, then the spinlock is already
@@ -2868,6 +2865,7 @@ int uart_remove_one_port(struct uart_driver *drv, struct uart_port *uport)
if (uport->type != PORT_UNKNOWN && uport->ops->release_port)
uport->ops->release_port(uport);
kfree(uport->tty_groups);
+ kfree(uport->name);
/*
* Indicate that there isn't a port here anymore.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index 9a47cc4f16a2..71707e8e6e3f 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -683,24 +683,37 @@ static void sci_init_pins(struct uart_port *port, unsigned int cflag)
}
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
+ u16 data = serial_port_in(port, SCPDR);
u16 ctrl = serial_port_in(port, SCPCR);
/* Enable RXD and TXD pin functions */
ctrl &= ~(SCPCR_RXDC | SCPCR_TXDC);
if (to_sci_port(port)->has_rtscts) {
- /* RTS# is output, driven 1 */
- ctrl |= SCPCR_RTSC;
- serial_port_out(port, SCPDR,
- serial_port_in(port, SCPDR) | SCPDR_RTSD);
+ /* RTS# is output, active low, unless autorts */
+ if (!(port->mctrl & TIOCM_RTS)) {
+ ctrl |= SCPCR_RTSC;
+ data |= SCPDR_RTSD;
+ } else if (!s->autorts) {
+ ctrl |= SCPCR_RTSC;
+ data &= ~SCPDR_RTSD;
+ } else {
+ /* Enable RTS# pin function */
+ ctrl &= ~SCPCR_RTSC;
+ }
/* Enable CTS# pin function */
ctrl &= ~SCPCR_CTSC;
}
+ serial_port_out(port, SCPDR, data);
serial_port_out(port, SCPCR, ctrl);
} else if (sci_getreg(port, SCSPTR)->size) {
u16 status = serial_port_in(port, SCSPTR);
- /* RTS# is output, driven 1 */
- status |= SCSPTR_RTSIO | SCSPTR_RTSDT;
+ /* RTS# is always output; and active low, unless autorts */
+ status |= SCSPTR_RTSIO;
+ if (!(port->mctrl & TIOCM_RTS))
+ status |= SCSPTR_RTSDT;
+ else if (!s->autorts)
+ status &= ~SCSPTR_RTSDT;
/* CTS# and SCK are inputs */
status &= ~(SCSPTR_CTSIO | SCSPTR_SCKIO);
serial_port_out(port, SCSPTR, status);
@@ -1985,11 +1998,13 @@ static int sci_startup(struct uart_port *port)
dev_dbg(port->dev, "%s(%d)\n", __func__, port->line);
+ sci_request_dma(port);
+
ret = sci_request_irq(s);
- if (unlikely(ret < 0))
+ if (unlikely(ret < 0)) {
+ sci_free_dma(port);
return ret;
-
- sci_request_dma(port);
+ }
return 0;
}
@@ -2021,8 +2036,8 @@ static void sci_shutdown(struct uart_port *port)
}
#endif
- sci_free_dma(port);
sci_free_irq(s);
+ sci_free_dma(port);
}
static int sci_sck_calc(struct sci_port *s, unsigned int bps,
@@ -2157,10 +2172,6 @@ static void sci_reset(struct uart_port *port)
unsigned int status;
struct sci_port *s = to_sci_port(port);
- do {
- status = serial_port_in(port, SCxSR);
- } while (!(status & SCxSR_TEND(port)));
-
serial_port_out(port, SCSCR, 0x00); /* TE=0, RE=0, CKE1=0 */
reg = sci_getreg(port, SCFCR);
@@ -2374,6 +2385,10 @@ done:
serial_port_out(port, SCFCR, ctrl);
}
+ if (port->flags & UPF_HARD_FLOW) {
+ /* Refresh (Auto) RTS */
+ sci_set_mctrl(port, port->mctrl);
+ }
scr_val |= SCSCR_RE | SCSCR_TE |
(s->cfg->scscr & ~(SCSCR_CKE1 | SCSCR_CKE0));
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index d98e3dc4838e..90996ad97b37 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -36,7 +36,7 @@
#define SPRD_FIFO_SIZE 128
#define SPRD_DEF_RATE 26000000
#define SPRD_BAUD_IO_LIMIT 3000000
-#define SPRD_TIMEOUT 256
+#define SPRD_TIMEOUT 256000
/* the offset of serial registers and BITs for them */
/* data registers */
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index a93a3167a9c6..f5335be344f6 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -887,13 +887,12 @@ static void asc_console_write(struct console *co, const char *s, unsigned count)
int locked = 1;
u32 intenable;
- local_irq_save(flags);
if (port->sysrq)
locked = 0; /* asc_interrupt has already claimed the lock */
else if (oops_in_progress)
- locked = spin_trylock(&port->lock);
+ locked = spin_trylock_irqsave(&port->lock, flags);
else
- spin_lock(&port->lock);
+ spin_lock_irqsave(&port->lock, flags);
/*
* Disable interrupts so we don't get the IRQ line bouncing
@@ -911,14 +910,13 @@ static void asc_console_write(struct console *co, const char *s, unsigned count)
asc_out(port, ASC_INTEN, intenable);
if (locked)
- spin_unlock(&port->lock);
- local_irq_restore(flags);
+ spin_unlock_irqrestore(&port->lock, flags);
}
static int asc_console_setup(struct console *co, char *options)
{
struct asc_port *ascport;
- int baud = 9600;
+ int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c
index 817bb0d3f326..c9b8d702dadc 100644
--- a/drivers/tty/serial/uartlite.c
+++ b/drivers/tty/serial/uartlite.c
@@ -28,7 +28,7 @@
#define ULITE_NAME "ttyUL"
#define ULITE_MAJOR 204
#define ULITE_MINOR 187
-#define ULITE_NR_UARTS 16
+#define ULITE_NR_UARTS CONFIG_SERIAL_UARTLITE_NR_UARTS
/* ---------------------------------------------------------------------
* Register definitions
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index ad77d0ed0c46..c0539950f8d7 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -30,6 +30,7 @@
#include <linux/io.h>
#include <linux/of.h>
#include <linux/module.h>
+#include <linux/pm_runtime.h>
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
@@ -176,6 +177,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define CDNS_UART_BDIV_MIN 4
#define CDNS_UART_BDIV_MAX 255
#define CDNS_UART_CD_MAX 65535
+#define UART_AUTOSUSPEND_TIMEOUT 3000
/**
* struct cdns_uart - device data
@@ -1065,16 +1067,13 @@ static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
static void cdns_uart_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
- struct cdns_uart *cdns_uart = port->private_data;
-
switch (state) {
case UART_PM_STATE_OFF:
- clk_disable(cdns_uart->uartclk);
- clk_disable(cdns_uart->pclk);
+ pm_runtime_mark_last_busy(port->dev);
+ pm_runtime_put_autosuspend(port->dev);
break;
default:
- clk_enable(cdns_uart->pclk);
- clk_enable(cdns_uart->uartclk);
+ pm_runtime_get_sync(port->dev);
break;
}
}
@@ -1353,12 +1352,7 @@ static int cdns_uart_suspend(struct device *device)
* the suspend.
*/
uart_suspend_port(&cdns_uart_uart_driver, port);
- if (console_suspend_enabled && !may_wake) {
- struct cdns_uart *cdns_uart = port->private_data;
-
- clk_disable(cdns_uart->uartclk);
- clk_disable(cdns_uart->pclk);
- } else {
+ if (!(console_suspend_enabled && !may_wake)) {
unsigned long flags = 0;
spin_lock_irqsave(&port->lock, flags);
@@ -1423,6 +1417,8 @@ static int cdns_uart_resume(struct device *device)
ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
writel(ctrl_reg, port->membase + CDNS_UART_CR);
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
spin_unlock_irqrestore(&port->lock, flags);
} else {
spin_lock_irqsave(&port->lock, flags);
@@ -1436,9 +1432,33 @@ static int cdns_uart_resume(struct device *device)
return uart_resume_port(&cdns_uart_uart_driver, port);
}
#endif /* ! CONFIG_PM_SLEEP */
+static int __maybe_unused cdns_runtime_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct cdns_uart *cdns_uart = port->private_data;
+
+ clk_disable(cdns_uart->uartclk);
+ clk_disable(cdns_uart->pclk);
+ return 0;
+};
+
+static int __maybe_unused cdns_runtime_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct uart_port *port = platform_get_drvdata(pdev);
+ struct cdns_uart *cdns_uart = port->private_data;
-static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend,
- cdns_uart_resume);
+ clk_enable(cdns_uart->pclk);
+ clk_enable(cdns_uart->uartclk);
+ return 0;
+};
+
+static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
+ SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
+ cdns_runtime_resume, NULL)
+};
static const struct cdns_platform_data zynqmp_uart_def = {
.quirks = CDNS_UART_RXBS_SUPPORT, };
@@ -1501,12 +1521,12 @@ static int cdns_uart_probe(struct platform_device *pdev)
return PTR_ERR(cdns_uart_data->uartclk);
}
- rc = clk_prepare(cdns_uart_data->pclk);
+ rc = clk_prepare_enable(cdns_uart_data->pclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
return rc;
}
- rc = clk_prepare(cdns_uart_data->uartclk);
+ rc = clk_prepare_enable(cdns_uart_data->uartclk);
if (rc) {
dev_err(&pdev->dev, "Unable to enable device clock.\n");
goto err_out_clk_dis_pclk;
@@ -1558,6 +1578,11 @@ static int cdns_uart_probe(struct platform_device *pdev)
cdns_uart_data->port = port;
platform_set_drvdata(pdev, port);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
@@ -1573,9 +1598,12 @@ err_out_notif_unreg:
&cdns_uart_data->clk_rate_change_nb);
#endif
err_out_clk_disable:
- clk_unprepare(cdns_uart_data->uartclk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
err_out_clk_dis_pclk:
- clk_unprepare(cdns_uart_data->pclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
return rc;
}
@@ -1599,8 +1627,11 @@ static int cdns_uart_remove(struct platform_device *pdev)
#endif
rc = uart_remove_one_port(&cdns_uart_uart_driver, port);
port->mapbase = 0;
- clk_unprepare(cdns_uart_data->uartclk);
- clk_unprepare(cdns_uart_data->pclk);
+ clk_disable_unprepare(cdns_uart_data->uartclk);
+ clk_disable_unprepare(cdns_uart_data->pclk);
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_set_suspended(&pdev->dev);
+ pm_runtime_dont_use_autosuspend(&pdev->dev);
return rc;
}
diff --git a/drivers/tty/tty_baudrate.c b/drivers/tty/tty_baudrate.c
new file mode 100644
index 000000000000..5c33fd25676d
--- /dev/null
+++ b/drivers/tty/tty_baudrate.c
@@ -0,0 +1,232 @@
+/*
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/export.h>
+
+
+/*
+ * Routine which returns the baud rate of the tty
+ *
+ * Note that the baud_table needs to be kept in sync with the
+ * include/asm/termbits.h file.
+ */
+static const speed_t baud_table[] = {
+ 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
+ 9600, 19200, 38400, 57600, 115200, 230400, 460800,
+#ifdef __sparc__
+ 76800, 153600, 307200, 614400, 921600
+#else
+ 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
+ 2500000, 3000000, 3500000, 4000000
+#endif
+};
+
+#ifndef __sparc__
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B500000, B576000,
+ B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
+ B3000000, B3500000, B4000000
+};
+#else
+static const tcflag_t baud_bits[] = {
+ B0, B50, B75, B110, B134, B150, B200, B300, B600,
+ B1200, B1800, B2400, B4800, B9600, B19200, B38400,
+ B57600, B115200, B230400, B460800, B76800, B153600,
+ B307200, B614400, B921600
+};
+#endif
+
+static int n_baud_table = ARRAY_SIZE(baud_table);
+
+/**
+ * tty_termios_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_baud_rate(struct ktermios *termios)
+{
+ unsigned int cbaud;
+
+ cbaud = termios->c_cflag & CBAUD;
+
+#ifdef BOTHER
+ /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
+ if (cbaud == BOTHER)
+ return termios->c_ospeed;
+#endif
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~CBAUDEX;
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+}
+EXPORT_SYMBOL(tty_termios_baud_rate);
+
+/**
+ * tty_termios_input_baud_rate
+ * @termios: termios structure
+ *
+ * Convert termios baud rate data into a speed. This should be called
+ * with the termios lock held if this termios is a terminal termios
+ * structure. May change the termios data. Device drivers can call this
+ * function but should use ->c_[io]speed directly as they are updated.
+ *
+ * Locking: none
+ */
+
+speed_t tty_termios_input_baud_rate(struct ktermios *termios)
+{
+#ifdef IBSHIFT
+ unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
+
+ if (cbaud == B0)
+ return tty_termios_baud_rate(termios);
+
+ /* Magic token for arbitrary speed via c_ispeed*/
+ if (cbaud == BOTHER)
+ return termios->c_ispeed;
+
+ if (cbaud & CBAUDEX) {
+ cbaud &= ~CBAUDEX;
+
+ if (cbaud < 1 || cbaud + 15 > n_baud_table)
+ termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
+ else
+ cbaud += 15;
+ }
+ return baud_table[cbaud];
+#else
+ return tty_termios_baud_rate(termios);
+#endif
+}
+EXPORT_SYMBOL(tty_termios_input_baud_rate);
+
+/**
+ * tty_termios_encode_baud_rate
+ * @termios: ktermios structure holding user requested state
+ * @ispeed: input speed
+ * @ospeed: output speed
+ *
+ * Encode the speeds set into the passed termios structure. This is
+ * used as a library helper for drivers so that they can report back
+ * the actual speed selected when it differs from the speed requested
+ *
+ * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
+ * we need to carefully set the bits when the user does not get the
+ * desired speed. We allow small margins and preserve as much of possible
+ * of the input intent to keep compatibility.
+ *
+ * Locking: Caller should hold termios lock. This is already held
+ * when calling this function from the driver termios handler.
+ *
+ * The ifdefs deal with platforms whose owners have yet to update them
+ * and will all go away once this is done.
+ */
+
+void tty_termios_encode_baud_rate(struct ktermios *termios,
+ speed_t ibaud, speed_t obaud)
+{
+ int i = 0;
+ int ifound = -1, ofound = -1;
+ int iclose = ibaud/50, oclose = obaud/50;
+ int ibinput = 0;
+
+ if (obaud == 0) /* CD dropped */
+ ibaud = 0; /* Clear ibaud to be sure */
+
+ termios->c_ispeed = ibaud;
+ termios->c_ospeed = obaud;
+
+#ifdef BOTHER
+ /* If the user asked for a precise weird speed give a precise weird
+ answer. If they asked for a Bfoo speed they may have problems
+ digesting non-exact replies so fuzz a bit */
+
+ if ((termios->c_cflag & CBAUD) == BOTHER)
+ oclose = 0;
+ if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
+ iclose = 0;
+ if ((termios->c_cflag >> IBSHIFT) & CBAUD)
+ ibinput = 1; /* An input speed was specified */
+#endif
+ termios->c_cflag &= ~CBAUD;
+
+ /*
+ * Our goal is to find a close match to the standard baud rate
+ * returned. Walk the baud rate table and if we get a very close
+ * match then report back the speed as a POSIX Bxxxx value by
+ * preference
+ */
+
+ do {
+ if (obaud - oclose <= baud_table[i] &&
+ obaud + oclose >= baud_table[i]) {
+ termios->c_cflag |= baud_bits[i];
+ ofound = i;
+ }
+ if (ibaud - iclose <= baud_table[i] &&
+ ibaud + iclose >= baud_table[i]) {
+ /* For the case input == output don't set IBAUD bits
+ if the user didn't do so */
+ if (ofound == i && !ibinput)
+ ifound = i;
+#ifdef IBSHIFT
+ else {
+ ifound = i;
+ termios->c_cflag |= (baud_bits[i] << IBSHIFT);
+ }
+#endif
+ }
+ } while (++i < n_baud_table);
+
+ /*
+ * If we found no match then use BOTHER if provided or warn
+ * the user their platform maintainer needs to wake up if not.
+ */
+#ifdef BOTHER
+ if (ofound == -1)
+ termios->c_cflag |= BOTHER;
+ /* Set exact input bits only if the input and output differ or the
+ user already did */
+ if (ifound == -1 && (ibaud != obaud || ibinput))
+ termios->c_cflag |= (BOTHER << IBSHIFT);
+#else
+ if (ifound == -1 || ofound == -1)
+ pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n");
+#endif
+}
+EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
+
+/**
+ * tty_encode_baud_rate - set baud rate of the tty
+ * @ibaud: input baud rate
+ * @obad: output baud rate
+ *
+ * Update the current termios data for the tty with the new speed
+ * settings. The caller must hold the termios_rwsem for the tty in
+ * question.
+ */
+
+void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
+{
+ tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
+}
+EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c
index 309d25065bb6..0c150b5a9dd6 100644
--- a/drivers/tty/tty_io.c
+++ b/drivers/tty/tty_io.c
@@ -377,65 +377,6 @@ struct tty_driver *tty_find_polling_driver(char *name, int *line)
EXPORT_SYMBOL_GPL(tty_find_polling_driver);
#endif
-static int is_ignored(int sig)
-{
- return (sigismember(&current->blocked, sig) ||
- current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
-}
-
-/**
- * tty_check_change - check for POSIX terminal changes
- * @tty: tty to check
- *
- * If we try to write to, or set the state of, a terminal and we're
- * not in the foreground, send a SIGTTOU. If the signal is blocked or
- * ignored, go ahead and perform the operation. (POSIX 7.2)
- *
- * Locking: ctrl_lock
- */
-
-int __tty_check_change(struct tty_struct *tty, int sig)
-{
- unsigned long flags;
- struct pid *pgrp, *tty_pgrp;
- int ret = 0;
-
- if (current->signal->tty != tty)
- return 0;
-
- rcu_read_lock();
- pgrp = task_pgrp(current);
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- tty_pgrp = tty->pgrp;
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-
- if (tty_pgrp && pgrp != tty->pgrp) {
- if (is_ignored(sig)) {
- if (sig == SIGTTIN)
- ret = -EIO;
- } else if (is_current_pgrp_orphaned())
- ret = -EIO;
- else {
- kill_pgrp(pgrp, sig, 1);
- set_thread_flag(TIF_SIGPENDING);
- ret = -ERESTARTSYS;
- }
- }
- rcu_read_unlock();
-
- if (!tty_pgrp)
- tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig);
-
- return ret;
-}
-
-int tty_check_change(struct tty_struct *tty)
-{
- return __tty_check_change(tty, SIGTTOU);
-}
-EXPORT_SYMBOL(tty_check_change);
-
static ssize_t hung_up_tty_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
@@ -509,79 +450,6 @@ static const struct file_operations hung_up_tty_fops = {
static DEFINE_SPINLOCK(redirect_lock);
static struct file *redirect;
-
-void proc_clear_tty(struct task_struct *p)
-{
- unsigned long flags;
- struct tty_struct *tty;
- spin_lock_irqsave(&p->sighand->siglock, flags);
- tty = p->signal->tty;
- p->signal->tty = NULL;
- spin_unlock_irqrestore(&p->sighand->siglock, flags);
- tty_kref_put(tty);
-}
-
-/**
- * proc_set_tty - set the controlling terminal
- *
- * Only callable by the session leader and only if it does not already have
- * a controlling terminal.
- *
- * Caller must hold: tty_lock()
- * a readlock on tasklist_lock
- * sighand lock
- */
-static void __proc_set_tty(struct tty_struct *tty)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- /*
- * The session and fg pgrp references will be non-NULL if
- * tiocsctty() is stealing the controlling tty
- */
- put_pid(tty->session);
- put_pid(tty->pgrp);
- tty->pgrp = get_pid(task_pgrp(current));
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- tty->session = get_pid(task_session(current));
- if (current->signal->tty) {
- tty_debug(tty, "current tty %s not NULL!!\n",
- current->signal->tty->name);
- tty_kref_put(current->signal->tty);
- }
- put_pid(current->signal->tty_old_pgrp);
- current->signal->tty = tty_kref_get(tty);
- current->signal->tty_old_pgrp = NULL;
-}
-
-static void proc_set_tty(struct tty_struct *tty)
-{
- spin_lock_irq(&current->sighand->siglock);
- __proc_set_tty(tty);
- spin_unlock_irq(&current->sighand->siglock);
-}
-
-struct tty_struct *get_current_tty(void)
-{
- struct tty_struct *tty;
- unsigned long flags;
-
- spin_lock_irqsave(&current->sighand->siglock, flags);
- tty = tty_kref_get(current->signal->tty);
- spin_unlock_irqrestore(&current->sighand->siglock, flags);
- return tty;
-}
-EXPORT_SYMBOL_GPL(get_current_tty);
-
-static void session_clear_tty(struct pid *session)
-{
- struct task_struct *p;
- do_each_pid_task(session, PIDTYPE_SID, p) {
- proc_clear_tty(p);
- } while_each_pid_task(session, PIDTYPE_SID, p);
-}
-
/**
* tty_wakeup - request more data
* @tty: terminal
@@ -609,60 +477,6 @@ void tty_wakeup(struct tty_struct *tty)
EXPORT_SYMBOL_GPL(tty_wakeup);
/**
- * tty_signal_session_leader - sends SIGHUP to session leader
- * @tty controlling tty
- * @exit_session if non-zero, signal all foreground group processes
- *
- * Send SIGHUP and SIGCONT to the session leader and its process group.
- * Optionally, signal all processes in the foreground process group.
- *
- * Returns the number of processes in the session with this tty
- * as their controlling terminal. This value is used to drop
- * tty references for those processes.
- */
-static int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
-{
- struct task_struct *p;
- int refs = 0;
- struct pid *tty_pgrp = NULL;
-
- read_lock(&tasklist_lock);
- if (tty->session) {
- do_each_pid_task(tty->session, PIDTYPE_SID, p) {
- spin_lock_irq(&p->sighand->siglock);
- if (p->signal->tty == tty) {
- p->signal->tty = NULL;
- /* We defer the dereferences outside fo
- the tasklist lock */
- refs++;
- }
- if (!p->signal->leader) {
- spin_unlock_irq(&p->sighand->siglock);
- continue;
- }
- __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
- __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
- put_pid(p->signal->tty_old_pgrp); /* A noop */
- spin_lock(&tty->ctrl_lock);
- tty_pgrp = get_pid(tty->pgrp);
- if (tty->pgrp)
- p->signal->tty_old_pgrp = get_pid(tty->pgrp);
- spin_unlock(&tty->ctrl_lock);
- spin_unlock_irq(&p->sighand->siglock);
- } while_each_pid_task(tty->session, PIDTYPE_SID, p);
- }
- read_unlock(&tasklist_lock);
-
- if (tty_pgrp) {
- if (exit_session)
- kill_pgrp(tty_pgrp, SIGHUP, exit_session);
- put_pid(tty_pgrp);
- }
-
- return refs;
-}
-
-/**
* __tty_hangup - actual handler for hangup events
* @work: tty device
*
@@ -840,7 +654,7 @@ void tty_vhangup_self(void)
* is complete. That guarantee is necessary for security reasons.
*/
-static void tty_vhangup_session(struct tty_struct *tty)
+void tty_vhangup_session(struct tty_struct *tty)
{
tty_debug_hangup(tty, "session hangup\n");
__tty_hangup(tty, 1);
@@ -862,106 +676,6 @@ int tty_hung_up_p(struct file *filp)
EXPORT_SYMBOL(tty_hung_up_p);
/**
- * disassociate_ctty - disconnect controlling tty
- * @on_exit: true if exiting so need to "hang up" the session
- *
- * This function is typically called only by the session leader, when
- * it wants to disassociate itself from its controlling tty.
- *
- * It performs the following functions:
- * (1) Sends a SIGHUP and SIGCONT to the foreground process group
- * (2) Clears the tty from being controlling the session
- * (3) Clears the controlling tty for all processes in the
- * session group.
- *
- * The argument on_exit is set to 1 if called when a process is
- * exiting; it is 0 if called by the ioctl TIOCNOTTY.
- *
- * Locking:
- * BTM is taken for hysterical raisins, and held when
- * called from no_tty().
- * tty_mutex is taken to protect tty
- * ->siglock is taken to protect ->signal/->sighand
- * tasklist_lock is taken to walk process list for sessions
- * ->siglock is taken to protect ->signal/->sighand
- */
-
-void disassociate_ctty(int on_exit)
-{
- struct tty_struct *tty;
-
- if (!current->signal->leader)
- return;
-
- tty = get_current_tty();
- if (tty) {
- if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
- tty_vhangup_session(tty);
- } else {
- struct pid *tty_pgrp = tty_get_pgrp(tty);
- if (tty_pgrp) {
- kill_pgrp(tty_pgrp, SIGHUP, on_exit);
- if (!on_exit)
- kill_pgrp(tty_pgrp, SIGCONT, on_exit);
- put_pid(tty_pgrp);
- }
- }
- tty_kref_put(tty);
-
- } else if (on_exit) {
- struct pid *old_pgrp;
- spin_lock_irq(&current->sighand->siglock);
- old_pgrp = current->signal->tty_old_pgrp;
- current->signal->tty_old_pgrp = NULL;
- spin_unlock_irq(&current->sighand->siglock);
- if (old_pgrp) {
- kill_pgrp(old_pgrp, SIGHUP, on_exit);
- kill_pgrp(old_pgrp, SIGCONT, on_exit);
- put_pid(old_pgrp);
- }
- return;
- }
-
- spin_lock_irq(&current->sighand->siglock);
- put_pid(current->signal->tty_old_pgrp);
- current->signal->tty_old_pgrp = NULL;
-
- tty = tty_kref_get(current->signal->tty);
- if (tty) {
- unsigned long flags;
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- put_pid(tty->session);
- put_pid(tty->pgrp);
- tty->session = NULL;
- tty->pgrp = NULL;
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
- tty_kref_put(tty);
- } else
- tty_debug_hangup(tty, "no current tty\n");
-
- spin_unlock_irq(&current->sighand->siglock);
- /* Now clear signal->tty under the lock */
- read_lock(&tasklist_lock);
- session_clear_tty(task_session(current));
- read_unlock(&tasklist_lock);
-}
-
-/**
- *
- * no_tty - Ensure the current process does not have a controlling tty
- */
-void no_tty(void)
-{
- /* FIXME: Review locking here. The tty_lock never covered any race
- between a new association and proc_clear_tty but possible we need
- to protect against this anyway */
- struct task_struct *tsk = current;
- disassociate_ctty(0);
- proc_clear_tty(tsk);
-}
-
-
-/**
* stop_tty - propagate flow control
* @tty: tty to stop
*
@@ -1520,7 +1234,7 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx)
* This code guarantees that either everything succeeds and the
* TTY is ready for operation, or else the table slots are vacated
* and the allocated memory released. (Except that the termios
- * and locked termios may be retained.)
+ * may be retained.)
*/
if (!try_module_get(driver->owner))
@@ -2163,38 +1877,13 @@ retry_open:
}
clear_bit(TTY_HUPPED, &tty->flags);
-
- read_lock(&tasklist_lock);
- spin_lock_irq(&current->sighand->siglock);
noctty = (filp->f_flags & O_NOCTTY) ||
- (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
- device == MKDEV(TTYAUX_MAJOR, 1) ||
- (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
- tty->driver->subtype == PTY_TYPE_MASTER);
-
- if (!noctty &&
- current->signal->leader &&
- !current->signal->tty &&
- tty->session == NULL) {
- /*
- * Don't let a process that only has write access to the tty
- * obtain the privileges associated with having a tty as
- * controlling terminal (being able to reopen it with full
- * access through /dev/tty, being able to perform pushback).
- * Many distributions set the group of all ttys to "tty" and
- * grant write-only access to all terminals for setgid tty
- * binaries, which should not imply full privileges on all ttys.
- *
- * This could theoretically break old code that performs open()
- * on a write-only file descriptor. In that case, it might be
- * necessary to also permit this if
- * inode_permission(inode, MAY_READ) == 0.
- */
- if (filp->f_mode & FMODE_READ)
- __proc_set_tty(tty);
- }
- spin_unlock_irq(&current->sighand->siglock);
- read_unlock(&tasklist_lock);
+ (IS_ENABLED(CONFIG_VT) && device == MKDEV(TTY_MAJOR, 0)) ||
+ device == MKDEV(TTYAUX_MAJOR, 1) ||
+ (tty->driver->type == TTY_DRIVER_TYPE_PTY &&
+ tty->driver->subtype == PTY_TYPE_MASTER);
+ if (!noctty)
+ tty_open_proc_set_tty(filp, tty);
tty_unlock(tty);
return 0;
}
@@ -2457,211 +2146,6 @@ static int fionbio(struct file *file, int __user *p)
}
/**
- * tiocsctty - set controlling tty
- * @tty: tty structure
- * @arg: user argument
- *
- * This ioctl is used to manage job control. It permits a session
- * leader to set this tty as the controlling tty for the session.
- *
- * Locking:
- * Takes tty_lock() to serialize proc_set_tty() for this tty
- * Takes tasklist_lock internally to walk sessions
- * Takes ->siglock() when updating signal->tty
- */
-
-static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
-{
- int ret = 0;
-
- tty_lock(tty);
- read_lock(&tasklist_lock);
-
- if (current->signal->leader && (task_session(current) == tty->session))
- goto unlock;
-
- /*
- * The process must be a session leader and
- * not have a controlling tty already.
- */
- if (!current->signal->leader || current->signal->tty) {
- ret = -EPERM;
- goto unlock;
- }
-
- if (tty->session) {
- /*
- * This tty is already the controlling
- * tty for another session group!
- */
- if (arg == 1 && capable(CAP_SYS_ADMIN)) {
- /*
- * Steal it away
- */
- session_clear_tty(tty->session);
- } else {
- ret = -EPERM;
- goto unlock;
- }
- }
-
- /* See the comment in tty_open(). */
- if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
- ret = -EPERM;
- goto unlock;
- }
-
- proc_set_tty(tty);
-unlock:
- read_unlock(&tasklist_lock);
- tty_unlock(tty);
- return ret;
-}
-
-/**
- * tty_get_pgrp - return a ref counted pgrp pid
- * @tty: tty to read
- *
- * Returns a refcounted instance of the pid struct for the process
- * group controlling the tty.
- */
-
-struct pid *tty_get_pgrp(struct tty_struct *tty)
-{
- unsigned long flags;
- struct pid *pgrp;
-
- spin_lock_irqsave(&tty->ctrl_lock, flags);
- pgrp = get_pid(tty->pgrp);
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
-
- return pgrp;
-}
-EXPORT_SYMBOL_GPL(tty_get_pgrp);
-
-/*
- * This checks not only the pgrp, but falls back on the pid if no
- * satisfactory pgrp is found. I dunno - gdb doesn't work correctly
- * without this...
- *
- * The caller must hold rcu lock or the tasklist lock.
- */
-static struct pid *session_of_pgrp(struct pid *pgrp)
-{
- struct task_struct *p;
- struct pid *sid = NULL;
-
- p = pid_task(pgrp, PIDTYPE_PGID);
- if (p == NULL)
- p = pid_task(pgrp, PIDTYPE_PID);
- if (p != NULL)
- sid = task_session(p);
-
- return sid;
-}
-
-/**
- * tiocgpgrp - get process group
- * @tty: tty passed by user
- * @real_tty: tty side of the tty passed by the user if a pty else the tty
- * @p: returned pid
- *
- * Obtain the process group of the tty. If there is no process group
- * return an error.
- *
- * Locking: none. Reference to current->signal->tty is safe.
- */
-
-static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- struct pid *pid;
- int ret;
- /*
- * (tty == real_tty) is a cheap way of
- * testing if the tty is NOT a master pty.
- */
- if (tty == real_tty && current->signal->tty != real_tty)
- return -ENOTTY;
- pid = tty_get_pgrp(real_tty);
- ret = put_user(pid_vnr(pid), p);
- put_pid(pid);
- return ret;
-}
-
-/**
- * tiocspgrp - attempt to set process group
- * @tty: tty passed by user
- * @real_tty: tty side device matching tty passed by user
- * @p: pid pointer
- *
- * Set the process group of the tty to the session passed. Only
- * permitted where the tty session is our session.
- *
- * Locking: RCU, ctrl lock
- */
-
-static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- struct pid *pgrp;
- pid_t pgrp_nr;
- int retval = tty_check_change(real_tty);
-
- if (retval == -EIO)
- return -ENOTTY;
- if (retval)
- return retval;
- if (!current->signal->tty ||
- (current->signal->tty != real_tty) ||
- (real_tty->session != task_session(current)))
- return -ENOTTY;
- if (get_user(pgrp_nr, p))
- return -EFAULT;
- if (pgrp_nr < 0)
- return -EINVAL;
- rcu_read_lock();
- pgrp = find_vpid(pgrp_nr);
- retval = -ESRCH;
- if (!pgrp)
- goto out_unlock;
- retval = -EPERM;
- if (session_of_pgrp(pgrp) != task_session(current))
- goto out_unlock;
- retval = 0;
- spin_lock_irq(&tty->ctrl_lock);
- put_pid(real_tty->pgrp);
- real_tty->pgrp = get_pid(pgrp);
- spin_unlock_irq(&tty->ctrl_lock);
-out_unlock:
- rcu_read_unlock();
- return retval;
-}
-
-/**
- * tiocgsid - get session id
- * @tty: tty passed by user
- * @real_tty: tty side of the tty passed by the user if a pty else the tty
- * @p: pointer to returned session id
- *
- * Obtain the session id of the tty. If there is no session
- * return an error.
- *
- * Locking: none. Reference to current->signal->tty is safe.
- */
-
-static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
-{
- /*
- * (tty == real_tty) is a cheap way of
- * testing if the tty is NOT a master pty.
- */
- if (tty == real_tty && current->signal->tty != real_tty)
- return -ENOTTY;
- if (!real_tty->session)
- return -ENOTTY;
- return put_user(pid_vnr(real_tty->session), p);
-}
-
-/**
* tiocsetd - set line discipline
* @tty: tty device
* @p: pointer to user data
@@ -2843,8 +2327,8 @@ static void tty_warn_deprecated_flags(struct serial_struct __user *ss)
flags &= ASYNC_DEPRECATED;
if (flags && __ratelimit(&depr_flags))
- pr_warning("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
- __func__, get_task_comm(comm, current), flags);
+ pr_warn("%s: '%s' is using deprecated serial flags (with no effect): %.8x\n",
+ __func__, get_task_comm(comm, current), flags);
}
/*
@@ -2920,19 +2404,6 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
int excl = test_bit(TTY_EXCLUSIVE, &tty->flags);
return put_user(excl, (int __user *)p);
}
- case TIOCNOTTY:
- if (current->signal->tty != tty)
- return -ENOTTY;
- no_tty();
- return 0;
- case TIOCSCTTY:
- return tiocsctty(real_tty, file, arg);
- case TIOCGPGRP:
- return tiocgpgrp(tty, real_tty, p);
- case TIOCSPGRP:
- return tiocspgrp(tty, real_tty, p);
- case TIOCGSID:
- return tiocgsid(tty, real_tty, p);
case TIOCGETD:
return tiocgetd(tty, p);
case TIOCSETD:
@@ -2993,6 +2464,10 @@ long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
case TIOCSSERIAL:
tty_warn_deprecated_flags(p);
break;
+ default:
+ retval = tty_jobctrl_ioctl(tty, real_tty, file, cmd, arg);
+ if (retval != -ENOIOCTLCMD)
+ return retval;
}
if (tty->ops->ioctl) {
retval = tty->ops->ioctl(tty, cmd, arg);
@@ -3293,9 +2768,9 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
{
char name[64];
dev_t devt = MKDEV(driver->major, driver->minor_start) + index;
- struct device *dev = NULL;
- int retval = -ENODEV;
- bool cdev = false;
+ struct ktermios *tp;
+ struct device *dev;
+ int retval;
if (index >= driver->num) {
pr_err("%s: Attempt to register invalid tty line number (%d)\n",
@@ -3308,18 +2783,9 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
else
tty_line_name(driver, index, name);
- if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
- retval = tty_cdev_add(driver, devt, index, 1);
- if (retval)
- goto error;
- cdev = true;
- }
-
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto error;
- }
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
dev->devt = devt;
dev->class = tty_class;
@@ -3329,18 +2795,38 @@ struct device *tty_register_device_attr(struct tty_driver *driver,
dev->groups = attr_grp;
dev_set_drvdata(dev, drvdata);
+ dev_set_uevent_suppress(dev, 1);
+
retval = device_register(dev);
if (retval)
- goto error;
+ goto err_put;
+
+ if (!(driver->flags & TTY_DRIVER_DYNAMIC_ALLOC)) {
+ /*
+ * Free any saved termios data so that the termios state is
+ * reset when reusing a minor number.
+ */
+ tp = driver->termios[index];
+ if (tp) {
+ driver->termios[index] = NULL;
+ kfree(tp);
+ }
+
+ retval = tty_cdev_add(driver, devt, index, 1);
+ if (retval)
+ goto err_del;
+ }
+
+ dev_set_uevent_suppress(dev, 0);
+ kobject_uevent(&dev->kobj, KOBJ_ADD);
return dev;
-error:
+err_del:
+ device_del(dev);
+err_put:
put_device(dev);
- if (cdev) {
- cdev_del(driver->cdevs[index]);
- driver->cdevs[index] = NULL;
- }
+
return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(tty_register_device_attr);
@@ -3441,11 +2927,6 @@ static void destruct_tty_driver(struct kref *kref)
struct ktermios *tp;
if (driver->flags & TTY_DRIVER_INSTALLED) {
- /*
- * Free the termios and termios_locked structures because
- * we don't want to get memory leaks when modular tty
- * drivers are removed from the kernel.
- */
for (i = 0; i < driver->num; i++) {
tp = driver->termios[i];
if (tp) {
@@ -3578,30 +3059,6 @@ void tty_default_fops(struct file_operations *fops)
*fops = tty_fops;
}
-/*
- * Initialize the console device. This is called *early*, so
- * we can't necessarily depend on lots of kernel help here.
- * Just do some early initializations, and do the complex setup
- * later.
- */
-void __init console_init(void)
-{
- initcall_t *call;
-
- /* Setup the default TTY line discipline. */
- n_tty_init();
-
- /*
- * set up the console device so that later boot sequences can
- * inform about problems etc..
- */
- call = __con_initcall_start;
- while (call < __con_initcall_end) {
- (*call)();
- call++;
- }
-}
-
static char *tty_devnode(struct device *dev, umode_t *mode)
{
if (!mode)
diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c
index a9a978731c5b..efa96e6c4c1b 100644
--- a/drivers/tty/tty_ioctl.c
+++ b/drivers/tty/tty_ioctl.c
@@ -258,228 +258,6 @@ static void unset_locked_termios(struct tty_struct *tty, struct ktermios *old)
/* FIXME: What should we do for i/ospeed */
}
-/*
- * Routine which returns the baud rate of the tty
- *
- * Note that the baud_table needs to be kept in sync with the
- * include/asm/termbits.h file.
- */
-static const speed_t baud_table[] = {
- 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
- 9600, 19200, 38400, 57600, 115200, 230400, 460800,
-#ifdef __sparc__
- 76800, 153600, 307200, 614400, 921600
-#else
- 500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
- 2500000, 3000000, 3500000, 4000000
-#endif
-};
-
-#ifndef __sparc__
-static const tcflag_t baud_bits[] = {
- B0, B50, B75, B110, B134, B150, B200, B300, B600,
- B1200, B1800, B2400, B4800, B9600, B19200, B38400,
- B57600, B115200, B230400, B460800, B500000, B576000,
- B921600, B1000000, B1152000, B1500000, B2000000, B2500000,
- B3000000, B3500000, B4000000
-};
-#else
-static const tcflag_t baud_bits[] = {
- B0, B50, B75, B110, B134, B150, B200, B300, B600,
- B1200, B1800, B2400, B4800, B9600, B19200, B38400,
- B57600, B115200, B230400, B460800, B76800, B153600,
- B307200, B614400, B921600
-};
-#endif
-
-static int n_baud_table = ARRAY_SIZE(baud_table);
-
-/**
- * tty_termios_baud_rate
- * @termios: termios structure
- *
- * Convert termios baud rate data into a speed. This should be called
- * with the termios lock held if this termios is a terminal termios
- * structure. May change the termios data. Device drivers can call this
- * function but should use ->c_[io]speed directly as they are updated.
- *
- * Locking: none
- */
-
-speed_t tty_termios_baud_rate(struct ktermios *termios)
-{
- unsigned int cbaud;
-
- cbaud = termios->c_cflag & CBAUD;
-
-#ifdef BOTHER
- /* Magic token for arbitrary speed via c_ispeed/c_ospeed */
- if (cbaud == BOTHER)
- return termios->c_ospeed;
-#endif
- if (cbaud & CBAUDEX) {
- cbaud &= ~CBAUDEX;
-
- if (cbaud < 1 || cbaud + 15 > n_baud_table)
- termios->c_cflag &= ~CBAUDEX;
- else
- cbaud += 15;
- }
- return baud_table[cbaud];
-}
-EXPORT_SYMBOL(tty_termios_baud_rate);
-
-/**
- * tty_termios_input_baud_rate
- * @termios: termios structure
- *
- * Convert termios baud rate data into a speed. This should be called
- * with the termios lock held if this termios is a terminal termios
- * structure. May change the termios data. Device drivers can call this
- * function but should use ->c_[io]speed directly as they are updated.
- *
- * Locking: none
- */
-
-speed_t tty_termios_input_baud_rate(struct ktermios *termios)
-{
-#ifdef IBSHIFT
- unsigned int cbaud = (termios->c_cflag >> IBSHIFT) & CBAUD;
-
- if (cbaud == B0)
- return tty_termios_baud_rate(termios);
-
- /* Magic token for arbitrary speed via c_ispeed*/
- if (cbaud == BOTHER)
- return termios->c_ispeed;
-
- if (cbaud & CBAUDEX) {
- cbaud &= ~CBAUDEX;
-
- if (cbaud < 1 || cbaud + 15 > n_baud_table)
- termios->c_cflag &= ~(CBAUDEX << IBSHIFT);
- else
- cbaud += 15;
- }
- return baud_table[cbaud];
-#else
- return tty_termios_baud_rate(termios);
-#endif
-}
-EXPORT_SYMBOL(tty_termios_input_baud_rate);
-
-/**
- * tty_termios_encode_baud_rate
- * @termios: ktermios structure holding user requested state
- * @ispeed: input speed
- * @ospeed: output speed
- *
- * Encode the speeds set into the passed termios structure. This is
- * used as a library helper for drivers so that they can report back
- * the actual speed selected when it differs from the speed requested
- *
- * For maximal back compatibility with legacy SYS5/POSIX *nix behaviour
- * we need to carefully set the bits when the user does not get the
- * desired speed. We allow small margins and preserve as much of possible
- * of the input intent to keep compatibility.
- *
- * Locking: Caller should hold termios lock. This is already held
- * when calling this function from the driver termios handler.
- *
- * The ifdefs deal with platforms whose owners have yet to update them
- * and will all go away once this is done.
- */
-
-void tty_termios_encode_baud_rate(struct ktermios *termios,
- speed_t ibaud, speed_t obaud)
-{
- int i = 0;
- int ifound = -1, ofound = -1;
- int iclose = ibaud/50, oclose = obaud/50;
- int ibinput = 0;
-
- if (obaud == 0) /* CD dropped */
- ibaud = 0; /* Clear ibaud to be sure */
-
- termios->c_ispeed = ibaud;
- termios->c_ospeed = obaud;
-
-#ifdef BOTHER
- /* If the user asked for a precise weird speed give a precise weird
- answer. If they asked for a Bfoo speed they may have problems
- digesting non-exact replies so fuzz a bit */
-
- if ((termios->c_cflag & CBAUD) == BOTHER)
- oclose = 0;
- if (((termios->c_cflag >> IBSHIFT) & CBAUD) == BOTHER)
- iclose = 0;
- if ((termios->c_cflag >> IBSHIFT) & CBAUD)
- ibinput = 1; /* An input speed was specified */
-#endif
- termios->c_cflag &= ~CBAUD;
-
- /*
- * Our goal is to find a close match to the standard baud rate
- * returned. Walk the baud rate table and if we get a very close
- * match then report back the speed as a POSIX Bxxxx value by
- * preference
- */
-
- do {
- if (obaud - oclose <= baud_table[i] &&
- obaud + oclose >= baud_table[i]) {
- termios->c_cflag |= baud_bits[i];
- ofound = i;
- }
- if (ibaud - iclose <= baud_table[i] &&
- ibaud + iclose >= baud_table[i]) {
- /* For the case input == output don't set IBAUD bits
- if the user didn't do so */
- if (ofound == i && !ibinput)
- ifound = i;
-#ifdef IBSHIFT
- else {
- ifound = i;
- termios->c_cflag |= (baud_bits[i] << IBSHIFT);
- }
-#endif
- }
- } while (++i < n_baud_table);
-
- /*
- * If we found no match then use BOTHER if provided or warn
- * the user their platform maintainer needs to wake up if not.
- */
-#ifdef BOTHER
- if (ofound == -1)
- termios->c_cflag |= BOTHER;
- /* Set exact input bits only if the input and output differ or the
- user already did */
- if (ifound == -1 && (ibaud != obaud || ibinput))
- termios->c_cflag |= (BOTHER << IBSHIFT);
-#else
- if (ifound == -1 || ofound == -1)
- pr_warn_once("tty: Unable to return correct speed data as your architecture needs updating.\n");
-#endif
-}
-EXPORT_SYMBOL_GPL(tty_termios_encode_baud_rate);
-
-/**
- * tty_encode_baud_rate - set baud rate of the tty
- * @ibaud: input baud rate
- * @obad: output baud rate
- *
- * Update the current termios data for the tty with the new speed
- * settings. The caller must hold the termios_rwsem for the tty in
- * question.
- */
-
-void tty_encode_baud_rate(struct tty_struct *tty, speed_t ibaud, speed_t obaud)
-{
- tty_termios_encode_baud_rate(&tty->termios, ibaud, obaud);
-}
-EXPORT_SYMBOL_GPL(tty_encode_baud_rate);
-
/**
* tty_termios_copy_hw - copy hardware settings
* @new: New termios
diff --git a/drivers/tty/tty_jobctrl.c b/drivers/tty/tty_jobctrl.c
new file mode 100644
index 000000000000..e7032309ee87
--- /dev/null
+++ b/drivers/tty/tty_jobctrl.c
@@ -0,0 +1,554 @@
+/*
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched/signal.h>
+#include <linux/sched/task.h>
+#include <linux/tty.h>
+#include <linux/fcntl.h>
+#include <linux/uaccess.h>
+
+static int is_ignored(int sig)
+{
+ return (sigismember(&current->blocked, sig) ||
+ current->sighand->action[sig-1].sa.sa_handler == SIG_IGN);
+}
+
+/**
+ * tty_check_change - check for POSIX terminal changes
+ * @tty: tty to check
+ *
+ * If we try to write to, or set the state of, a terminal and we're
+ * not in the foreground, send a SIGTTOU. If the signal is blocked or
+ * ignored, go ahead and perform the operation. (POSIX 7.2)
+ *
+ * Locking: ctrl_lock
+ */
+int __tty_check_change(struct tty_struct *tty, int sig)
+{
+ unsigned long flags;
+ struct pid *pgrp, *tty_pgrp;
+ int ret = 0;
+
+ if (current->signal->tty != tty)
+ return 0;
+
+ rcu_read_lock();
+ pgrp = task_pgrp(current);
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ tty_pgrp = tty->pgrp;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ if (tty_pgrp && pgrp != tty->pgrp) {
+ if (is_ignored(sig)) {
+ if (sig == SIGTTIN)
+ ret = -EIO;
+ } else if (is_current_pgrp_orphaned())
+ ret = -EIO;
+ else {
+ kill_pgrp(pgrp, sig, 1);
+ set_thread_flag(TIF_SIGPENDING);
+ ret = -ERESTARTSYS;
+ }
+ }
+ rcu_read_unlock();
+
+ if (!tty_pgrp)
+ tty_warn(tty, "sig=%d, tty->pgrp == NULL!\n", sig);
+
+ return ret;
+}
+
+int tty_check_change(struct tty_struct *tty)
+{
+ return __tty_check_change(tty, SIGTTOU);
+}
+EXPORT_SYMBOL(tty_check_change);
+
+void proc_clear_tty(struct task_struct *p)
+{
+ unsigned long flags;
+ struct tty_struct *tty;
+ spin_lock_irqsave(&p->sighand->siglock, flags);
+ tty = p->signal->tty;
+ p->signal->tty = NULL;
+ spin_unlock_irqrestore(&p->sighand->siglock, flags);
+ tty_kref_put(tty);
+}
+
+/**
+ * proc_set_tty - set the controlling terminal
+ *
+ * Only callable by the session leader and only if it does not already have
+ * a controlling terminal.
+ *
+ * Caller must hold: tty_lock()
+ * a readlock on tasklist_lock
+ * sighand lock
+ */
+static void __proc_set_tty(struct tty_struct *tty)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ /*
+ * The session and fg pgrp references will be non-NULL if
+ * tiocsctty() is stealing the controlling tty
+ */
+ put_pid(tty->session);
+ put_pid(tty->pgrp);
+ tty->pgrp = get_pid(task_pgrp(current));
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty->session = get_pid(task_session(current));
+ if (current->signal->tty) {
+ tty_debug(tty, "current tty %s not NULL!!\n",
+ current->signal->tty->name);
+ tty_kref_put(current->signal->tty);
+ }
+ put_pid(current->signal->tty_old_pgrp);
+ current->signal->tty = tty_kref_get(tty);
+ current->signal->tty_old_pgrp = NULL;
+}
+
+static void proc_set_tty(struct tty_struct *tty)
+{
+ spin_lock_irq(&current->sighand->siglock);
+ __proc_set_tty(tty);
+ spin_unlock_irq(&current->sighand->siglock);
+}
+
+/*
+ * Called by tty_open() to set the controlling tty if applicable.
+ */
+void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty)
+{
+ read_lock(&tasklist_lock);
+ spin_lock_irq(&current->sighand->siglock);
+ if (current->signal->leader &&
+ !current->signal->tty &&
+ tty->session == NULL) {
+ /*
+ * Don't let a process that only has write access to the tty
+ * obtain the privileges associated with having a tty as
+ * controlling terminal (being able to reopen it with full
+ * access through /dev/tty, being able to perform pushback).
+ * Many distributions set the group of all ttys to "tty" and
+ * grant write-only access to all terminals for setgid tty
+ * binaries, which should not imply full privileges on all ttys.
+ *
+ * This could theoretically break old code that performs open()
+ * on a write-only file descriptor. In that case, it might be
+ * necessary to also permit this if
+ * inode_permission(inode, MAY_READ) == 0.
+ */
+ if (filp->f_mode & FMODE_READ)
+ __proc_set_tty(tty);
+ }
+ spin_unlock_irq(&current->sighand->siglock);
+ read_unlock(&tasklist_lock);
+}
+
+struct tty_struct *get_current_tty(void)
+{
+ struct tty_struct *tty;
+ unsigned long flags;
+
+ spin_lock_irqsave(&current->sighand->siglock, flags);
+ tty = tty_kref_get(current->signal->tty);
+ spin_unlock_irqrestore(&current->sighand->siglock, flags);
+ return tty;
+}
+EXPORT_SYMBOL_GPL(get_current_tty);
+
+/*
+ * Called from tty_release().
+ */
+void session_clear_tty(struct pid *session)
+{
+ struct task_struct *p;
+ do_each_pid_task(session, PIDTYPE_SID, p) {
+ proc_clear_tty(p);
+ } while_each_pid_task(session, PIDTYPE_SID, p);
+}
+
+/**
+ * tty_signal_session_leader - sends SIGHUP to session leader
+ * @tty controlling tty
+ * @exit_session if non-zero, signal all foreground group processes
+ *
+ * Send SIGHUP and SIGCONT to the session leader and its process group.
+ * Optionally, signal all processes in the foreground process group.
+ *
+ * Returns the number of processes in the session with this tty
+ * as their controlling terminal. This value is used to drop
+ * tty references for those processes.
+ */
+int tty_signal_session_leader(struct tty_struct *tty, int exit_session)
+{
+ struct task_struct *p;
+ int refs = 0;
+ struct pid *tty_pgrp = NULL;
+
+ read_lock(&tasklist_lock);
+ if (tty->session) {
+ do_each_pid_task(tty->session, PIDTYPE_SID, p) {
+ spin_lock_irq(&p->sighand->siglock);
+ if (p->signal->tty == tty) {
+ p->signal->tty = NULL;
+ /* We defer the dereferences outside fo
+ the tasklist lock */
+ refs++;
+ }
+ if (!p->signal->leader) {
+ spin_unlock_irq(&p->sighand->siglock);
+ continue;
+ }
+ __group_send_sig_info(SIGHUP, SEND_SIG_PRIV, p);
+ __group_send_sig_info(SIGCONT, SEND_SIG_PRIV, p);
+ put_pid(p->signal->tty_old_pgrp); /* A noop */
+ spin_lock(&tty->ctrl_lock);
+ tty_pgrp = get_pid(tty->pgrp);
+ if (tty->pgrp)
+ p->signal->tty_old_pgrp = get_pid(tty->pgrp);
+ spin_unlock(&tty->ctrl_lock);
+ spin_unlock_irq(&p->sighand->siglock);
+ } while_each_pid_task(tty->session, PIDTYPE_SID, p);
+ }
+ read_unlock(&tasklist_lock);
+
+ if (tty_pgrp) {
+ if (exit_session)
+ kill_pgrp(tty_pgrp, SIGHUP, exit_session);
+ put_pid(tty_pgrp);
+ }
+
+ return refs;
+}
+
+/**
+ * disassociate_ctty - disconnect controlling tty
+ * @on_exit: true if exiting so need to "hang up" the session
+ *
+ * This function is typically called only by the session leader, when
+ * it wants to disassociate itself from its controlling tty.
+ *
+ * It performs the following functions:
+ * (1) Sends a SIGHUP and SIGCONT to the foreground process group
+ * (2) Clears the tty from being controlling the session
+ * (3) Clears the controlling tty for all processes in the
+ * session group.
+ *
+ * The argument on_exit is set to 1 if called when a process is
+ * exiting; it is 0 if called by the ioctl TIOCNOTTY.
+ *
+ * Locking:
+ * BTM is taken for hysterical raisons, and held when
+ * called from no_tty().
+ * tty_mutex is taken to protect tty
+ * ->siglock is taken to protect ->signal/->sighand
+ * tasklist_lock is taken to walk process list for sessions
+ * ->siglock is taken to protect ->signal/->sighand
+ */
+void disassociate_ctty(int on_exit)
+{
+ struct tty_struct *tty;
+
+ if (!current->signal->leader)
+ return;
+
+ tty = get_current_tty();
+ if (tty) {
+ if (on_exit && tty->driver->type != TTY_DRIVER_TYPE_PTY) {
+ tty_vhangup_session(tty);
+ } else {
+ struct pid *tty_pgrp = tty_get_pgrp(tty);
+ if (tty_pgrp) {
+ kill_pgrp(tty_pgrp, SIGHUP, on_exit);
+ if (!on_exit)
+ kill_pgrp(tty_pgrp, SIGCONT, on_exit);
+ put_pid(tty_pgrp);
+ }
+ }
+ tty_kref_put(tty);
+
+ } else if (on_exit) {
+ struct pid *old_pgrp;
+ spin_lock_irq(&current->sighand->siglock);
+ old_pgrp = current->signal->tty_old_pgrp;
+ current->signal->tty_old_pgrp = NULL;
+ spin_unlock_irq(&current->sighand->siglock);
+ if (old_pgrp) {
+ kill_pgrp(old_pgrp, SIGHUP, on_exit);
+ kill_pgrp(old_pgrp, SIGCONT, on_exit);
+ put_pid(old_pgrp);
+ }
+ return;
+ }
+
+ spin_lock_irq(&current->sighand->siglock);
+ put_pid(current->signal->tty_old_pgrp);
+ current->signal->tty_old_pgrp = NULL;
+
+ tty = tty_kref_get(current->signal->tty);
+ if (tty) {
+ unsigned long flags;
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ put_pid(tty->session);
+ put_pid(tty->pgrp);
+ tty->session = NULL;
+ tty->pgrp = NULL;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+ tty_kref_put(tty);
+ }
+
+ spin_unlock_irq(&current->sighand->siglock);
+ /* Now clear signal->tty under the lock */
+ read_lock(&tasklist_lock);
+ session_clear_tty(task_session(current));
+ read_unlock(&tasklist_lock);
+}
+
+/**
+ *
+ * no_tty - Ensure the current process does not have a controlling tty
+ */
+void no_tty(void)
+{
+ /* FIXME: Review locking here. The tty_lock never covered any race
+ between a new association and proc_clear_tty but possible we need
+ to protect against this anyway */
+ struct task_struct *tsk = current;
+ disassociate_ctty(0);
+ proc_clear_tty(tsk);
+}
+
+/**
+ * tiocsctty - set controlling tty
+ * @tty: tty structure
+ * @arg: user argument
+ *
+ * This ioctl is used to manage job control. It permits a session
+ * leader to set this tty as the controlling tty for the session.
+ *
+ * Locking:
+ * Takes tty_lock() to serialize proc_set_tty() for this tty
+ * Takes tasklist_lock internally to walk sessions
+ * Takes ->siglock() when updating signal->tty
+ */
+static int tiocsctty(struct tty_struct *tty, struct file *file, int arg)
+{
+ int ret = 0;
+
+ tty_lock(tty);
+ read_lock(&tasklist_lock);
+
+ if (current->signal->leader && (task_session(current) == tty->session))
+ goto unlock;
+
+ /*
+ * The process must be a session leader and
+ * not have a controlling tty already.
+ */
+ if (!current->signal->leader || current->signal->tty) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
+ if (tty->session) {
+ /*
+ * This tty is already the controlling
+ * tty for another session group!
+ */
+ if (arg == 1 && capable(CAP_SYS_ADMIN)) {
+ /*
+ * Steal it away
+ */
+ session_clear_tty(tty->session);
+ } else {
+ ret = -EPERM;
+ goto unlock;
+ }
+ }
+
+ /* See the comment in tty_open_proc_set_tty(). */
+ if ((file->f_mode & FMODE_READ) == 0 && !capable(CAP_SYS_ADMIN)) {
+ ret = -EPERM;
+ goto unlock;
+ }
+
+ proc_set_tty(tty);
+unlock:
+ read_unlock(&tasklist_lock);
+ tty_unlock(tty);
+ return ret;
+}
+
+/**
+ * tty_get_pgrp - return a ref counted pgrp pid
+ * @tty: tty to read
+ *
+ * Returns a refcounted instance of the pid struct for the process
+ * group controlling the tty.
+ */
+struct pid *tty_get_pgrp(struct tty_struct *tty)
+{
+ unsigned long flags;
+ struct pid *pgrp;
+
+ spin_lock_irqsave(&tty->ctrl_lock, flags);
+ pgrp = get_pid(tty->pgrp);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
+
+ return pgrp;
+}
+EXPORT_SYMBOL_GPL(tty_get_pgrp);
+
+/*
+ * This checks not only the pgrp, but falls back on the pid if no
+ * satisfactory pgrp is found. I dunno - gdb doesn't work correctly
+ * without this...
+ *
+ * The caller must hold rcu lock or the tasklist lock.
+ */
+static struct pid *session_of_pgrp(struct pid *pgrp)
+{
+ struct task_struct *p;
+ struct pid *sid = NULL;
+
+ p = pid_task(pgrp, PIDTYPE_PGID);
+ if (p == NULL)
+ p = pid_task(pgrp, PIDTYPE_PID);
+ if (p != NULL)
+ sid = task_session(p);
+
+ return sid;
+}
+
+/**
+ * tiocgpgrp - get process group
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
+ * @p: returned pid
+ *
+ * Obtain the process group of the tty. If there is no process group
+ * return an error.
+ *
+ * Locking: none. Reference to current->signal->tty is safe.
+ */
+static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ struct pid *pid;
+ int ret;
+ /*
+ * (tty == real_tty) is a cheap way of
+ * testing if the tty is NOT a master pty.
+ */
+ if (tty == real_tty && current->signal->tty != real_tty)
+ return -ENOTTY;
+ pid = tty_get_pgrp(real_tty);
+ ret = put_user(pid_vnr(pid), p);
+ put_pid(pid);
+ return ret;
+}
+
+/**
+ * tiocspgrp - attempt to set process group
+ * @tty: tty passed by user
+ * @real_tty: tty side device matching tty passed by user
+ * @p: pid pointer
+ *
+ * Set the process group of the tty to the session passed. Only
+ * permitted where the tty session is our session.
+ *
+ * Locking: RCU, ctrl lock
+ */
+static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ struct pid *pgrp;
+ pid_t pgrp_nr;
+ int retval = tty_check_change(real_tty);
+
+ if (retval == -EIO)
+ return -ENOTTY;
+ if (retval)
+ return retval;
+ if (!current->signal->tty ||
+ (current->signal->tty != real_tty) ||
+ (real_tty->session != task_session(current)))
+ return -ENOTTY;
+ if (get_user(pgrp_nr, p))
+ return -EFAULT;
+ if (pgrp_nr < 0)
+ return -EINVAL;
+ rcu_read_lock();
+ pgrp = find_vpid(pgrp_nr);
+ retval = -ESRCH;
+ if (!pgrp)
+ goto out_unlock;
+ retval = -EPERM;
+ if (session_of_pgrp(pgrp) != task_session(current))
+ goto out_unlock;
+ retval = 0;
+ spin_lock_irq(&tty->ctrl_lock);
+ put_pid(real_tty->pgrp);
+ real_tty->pgrp = get_pid(pgrp);
+ spin_unlock_irq(&tty->ctrl_lock);
+out_unlock:
+ rcu_read_unlock();
+ return retval;
+}
+
+/**
+ * tiocgsid - get session id
+ * @tty: tty passed by user
+ * @real_tty: tty side of the tty passed by the user if a pty else the tty
+ * @p: pointer to returned session id
+ *
+ * Obtain the session id of the tty. If there is no session
+ * return an error.
+ *
+ * Locking: none. Reference to current->signal->tty is safe.
+ */
+static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t __user *p)
+{
+ /*
+ * (tty == real_tty) is a cheap way of
+ * testing if the tty is NOT a master pty.
+ */
+ if (tty == real_tty && current->signal->tty != real_tty)
+ return -ENOTTY;
+ if (!real_tty->session)
+ return -ENOTTY;
+ return put_user(pid_vnr(real_tty->session), p);
+}
+
+/*
+ * Called from tty_ioctl(). If tty is a pty then real_tty is the slave side,
+ * if not then tty == real_tty.
+ */
+long tty_jobctrl_ioctl(struct tty_struct *tty, struct tty_struct *real_tty,
+ struct file *file, unsigned int cmd, unsigned long arg)
+{
+ void __user *p = (void __user *)arg;
+
+ switch (cmd) {
+ case TIOCNOTTY:
+ if (current->signal->tty != tty)
+ return -ENOTTY;
+ no_tty();
+ return 0;
+ case TIOCSCTTY:
+ return tiocsctty(real_tty, file, arg);
+ case TIOCGPGRP:
+ return tiocgpgrp(tty, real_tty, p);
+ case TIOCSPGRP:
+ return tiocspgrp(tty, real_tty, p);
+ case TIOCGSID:
+ return tiocgsid(tty, real_tty, p);
+ }
+ return -ENOIOCTLCMD;
+}
diff --git a/drivers/tty/vt/selection.c b/drivers/tty/vt/selection.c
index 36e1b8c7680f..accbd1257bc4 100644
--- a/drivers/tty/vt/selection.c
+++ b/drivers/tty/vt/selection.c
@@ -80,21 +80,17 @@ void clear_selection(void)
/*
* User settable table: what characters are to be considered alphabetic?
- * 256 bits. Locked by the console lock.
+ * 128 bits. Locked by the console lock.
*/
-static u32 inwordLut[8]={
+static u32 inwordLut[]={
0x00000000, /* control chars */
- 0x03FF0000, /* digits */
+ 0x03FFE000, /* digits and "-./" */
0x87FFFFFE, /* uppercase and '_' */
0x07FFFFFE, /* lowercase */
- 0x00000000,
- 0x00000000,
- 0xFF7FFFFF, /* latin-1 accented letters, not multiplication sign */
- 0xFF7FFFFF /* latin-1 accented letters, not division sign */
};
static inline int inword(const u16 c) {
- return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
+ return c > 0x7f || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}
/**
@@ -106,10 +102,10 @@ static inline int inword(const u16 c) {
*/
int sel_loadlut(char __user *p)
{
- u32 tmplut[8];
- if (copy_from_user(tmplut, (u32 __user *)(p+4), 32))
+ u32 tmplut[ARRAY_SIZE(inwordLut)];
+ if (copy_from_user(tmplut, (u32 __user *)(p+4), sizeof(inwordLut)))
return -EFAULT;
- memcpy(inwordLut, tmplut, 32);
+ memcpy(inwordLut, tmplut, sizeof(inwordLut));
return 0;
}
diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c
index 5c4933bb4b53..9c9945284bcf 100644
--- a/drivers/tty/vt/vt.c
+++ b/drivers/tty/vt/vt.c
@@ -181,7 +181,7 @@ int console_blanked;
static int vesa_blank_mode; /* 0:none 1:suspendV 2:suspendH 3:powerdown */
static int vesa_off_interval;
-static int blankinterval = 10*60;
+static int blankinterval;
core_param(consoleblank, blankinterval, int, 0444);
static DECLARE_WORK(console_work, console_callback);