Merge tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V updates from Palmer Dabbelt:

 - Support for the T-Head PMU via the perf subsystem

 - ftrace support for rv32

 - Support for non-volatile memory devices

 - Various fixes and cleanups

* tag 'riscv-for-linus-6.2-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (52 commits)
  Documentation: RISC-V: patch-acceptance: s/implementor/implementer
  Documentation: RISC-V: Mention the UEFI Standards
  Documentation: RISC-V: Allow patches for non-standard behavior
  Documentation: RISC-V: Fix a typo in patch-acceptance
  riscv: Fixup compile error with !MMU
  riscv: Fix P4D_SHIFT definition for 3-level page table mode
  riscv: Apply a static assert to riscv_isa_ext_id
  RISC-V: Add some comments about the shadow and overflow stacks
  RISC-V: Align the shadow stack
  RISC-V: Ensure Zicbom has a valid block size
  RISC-V: Introduce riscv_isa_extension_check
  RISC-V: Improve use of isa2hwcap[]
  riscv: Don't duplicate _ALTERNATIVE_CFG* macros
  riscv: alternatives: Drop the underscores from the assembly macro names
  riscv: alternatives: Don't name unused macro parameters
  riscv: Don't duplicate __ALTERNATIVE_CFG in __ALTERNATIVE_CFG_2
  riscv: mm: call best_map_size many times during linear-mapping
  riscv: Move cast inside kernel_mapping_[pv]a_to_[vp]a
  riscv: Fix crash during early errata patching
  riscv: boot: add zstd support
  ...

2 files changed, 26 insertions, 29 deletions

diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d07568a2c539..caa952c40ff9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -538,31 +538,14 @@ config TI_PRUSS_INTC
 	  different processors within the SoC.
 
 config RISCV_INTC
-	bool "RISC-V Local Interrupt Controller"
+	bool
 	depends on RISCV
-	default y
-	help
-	   This enables support for the per-HART local interrupt controller
-	   found in standard RISC-V systems.  The per-HART local interrupt
-	   controller handles timer interrupts, software interrupts, and
-	   hardware interrupts. Without a per-HART local interrupt controller,
-	   a RISC-V system will be unable to handle any interrupts.
-
-	   If you don't know what to do here, say Y.
 
 config SIFIVE_PLIC
-	bool "SiFive Platform-Level Interrupt Controller"
+	bool
 	depends on RISCV
 	select IRQ_DOMAIN_HIERARCHY
 	select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
-	help
-	   This enables support for the PLIC chip found in SiFive (and
-	   potentially other) RISC-V systems.  The PLIC controls devices
-	   interrupts and connects them to each core's local interrupt
-	   controller.  Aside from timer and software interrupts, all other
-	   interrupt sources are subordinate to the PLIC.
-
-	   If you don't know what to do here, say Y.
 
 config EXYNOS_IRQ_COMBINER
 	bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
diff --git a/drivers/perf/riscv_pmu_sbi.c b/drivers/perf/riscv_pmu_sbi.c
index 3852c18362f5..f6507efe2a58 100644
--- a/drivers/perf/riscv_pmu_sbi.c
+++ b/drivers/perf/riscv_pmu_sbi.c
@@ -20,6 +20,7 @@
 #include <linux/cpu_pm.h>
 #include <linux/sched/clock.h>
 
+#include <asm/errata_list.h>
 #include <asm/sbi.h>
 #include <asm/hwcap.h>
 
@@ -47,6 +48,8 @@ static const struct attribute_group *riscv_pmu_attr_groups[] = {
  * per_cpu in case of harts with different pmu counters
  */
 static union sbi_pmu_ctr_info *pmu_ctr_list;
+static bool riscv_pmu_use_irq;
+static unsigned int riscv_pmu_irq_num;
 static unsigned int riscv_pmu_irq;
 
 struct sbi_pmu_event_data {
@@ -580,7 +583,7 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 	fidx = find_first_bit(cpu_hw_evt->used_hw_ctrs, RISCV_MAX_COUNTERS);
 	event = cpu_hw_evt->events[fidx];
 	if (!event) {
-		csr_clear(CSR_SIP, SIP_LCOFIP);
+		csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
 		return IRQ_NONE;
 	}
 
@@ -588,13 +591,13 @@ static irqreturn_t pmu_sbi_ovf_handler(int irq, void *dev)
 	pmu_sbi_stop_hw_ctrs(pmu);
 
 	/* Overflow status register should only be read after counter are stopped */
-	overflow = csr_read(CSR_SSCOUNTOVF);
+	ALT_SBI_PMU_OVERFLOW(overflow);
 
 	/*
 	 * Overflow interrupt pending bit should only be cleared after stopping
 	 * all the counters to avoid any race condition.
 	 */
-	csr_clear(CSR_SIP, SIP_LCOFIP);
+	csr_clear(CSR_SIP, BIT(riscv_pmu_irq_num));
 
 	/* No overflow bit is set */
 	if (!overflow)
@@ -661,10 +664,10 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 	/* Stop all the counters so that they can be enabled from perf */
 	pmu_sbi_stop_all(pmu);
 
-	if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
+	if (riscv_pmu_use_irq) {
 		cpu_hw_evt->irq = riscv_pmu_irq;
-		csr_clear(CSR_IP, BIT(RV_IRQ_PMU));
-		csr_set(CSR_IE, BIT(RV_IRQ_PMU));
+		csr_clear(CSR_IP, BIT(riscv_pmu_irq_num));
+		csr_set(CSR_IE, BIT(riscv_pmu_irq_num));
 		enable_percpu_irq(riscv_pmu_irq, IRQ_TYPE_NONE);
 	}
 
@@ -673,9 +676,9 @@ static int pmu_sbi_starting_cpu(unsigned int cpu, struct hlist_node *node)
 
 static int pmu_sbi_dying_cpu(unsigned int cpu, struct hlist_node *node)
 {
-	if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
+	if (riscv_pmu_use_irq) {
 		disable_percpu_irq(riscv_pmu_irq);
-		csr_clear(CSR_IE, BIT(RV_IRQ_PMU));
+		csr_clear(CSR_IE, BIT(riscv_pmu_irq_num));
 	}
 
 	/* Disable all counters access for user mode now */
@@ -691,7 +694,18 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 	struct device_node *cpu, *child;
 	struct irq_domain *domain = NULL;
 
-	if (!riscv_isa_extension_available(NULL, SSCOFPMF))
+	if (riscv_isa_extension_available(NULL, SSCOFPMF)) {
+		riscv_pmu_irq_num = RV_IRQ_PMU;
+		riscv_pmu_use_irq = true;
+	} else if (IS_ENABLED(CONFIG_ERRATA_THEAD_PMU) &&
+		   riscv_cached_mvendorid(0) == THEAD_VENDOR_ID &&
+		   riscv_cached_marchid(0) == 0 &&
+		   riscv_cached_mimpid(0) == 0) {
+		riscv_pmu_irq_num = THEAD_C9XX_RV_IRQ_PMU;
+		riscv_pmu_use_irq = true;
+	}
+
+	if (!riscv_pmu_use_irq)
 		return -EOPNOTSUPP;
 
 	for_each_of_cpu_node(cpu) {
@@ -713,7 +727,7 @@ static int pmu_sbi_setup_irqs(struct riscv_pmu *pmu, struct platform_device *pde
 		return -ENODEV;
 	}
 
-	riscv_pmu_irq = irq_create_mapping(domain, RV_IRQ_PMU);
+	riscv_pmu_irq = irq_create_mapping(domain, riscv_pmu_irq_num);
 	if (!riscv_pmu_irq) {
 		pr_err("Failed to map PMU interrupt for node\n");
 		return -ENODEV;