summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-02-27 16:19:22 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-02-27 16:19:22 -0800
commitf1dd6ad599732fc89f36fdd65a2c2cf3c63a8711 (patch)
tree5092207128e47cba99dc0fe373fff6a36f4cb4b8 /drivers
parent8d37a371b6869920e6c40c495c68eabba1ef3909 (diff)
parente10b234b3c4e255d3300a486c4ac15b43253ac6d (diff)
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/i2c/busses/Kconfig10
-rw-r--r--drivers/i2c/busses/Makefile1
-rw-r--r--drivers/i2c/busses/i2c-octeon.c651
-rw-r--r--drivers/ide/au1xxx-ide.c21
-rw-r--r--drivers/mmc/host/au1xmmc.c12
-rw-r--r--drivers/mtd/maps/Kconfig6
-rw-r--r--drivers/mtd/maps/Makefile1
-rw-r--r--drivers/mtd/maps/alchemy-flash.c166
-rw-r--r--drivers/mtd/nand/au1550nd.c4
-rw-r--r--drivers/net/au1000_eth.c441
-rw-r--r--drivers/net/au1000_eth.h9
-rw-r--r--drivers/net/cpmac.c10
-rw-r--r--drivers/net/irda/au1k_ir.c14
-rw-r--r--drivers/pcmcia/Kconfig21
-rw-r--r--drivers/pcmcia/Makefile12
-rw-r--r--drivers/pcmcia/au1000_db1x00.c305
-rw-r--r--drivers/pcmcia/au1000_generic.c10
-rw-r--r--drivers/pcmcia/au1000_generic.h18
-rw-r--r--drivers/pcmcia/au1000_pb1x00.c119
-rw-r--r--drivers/pcmcia/au1000_xxs1500.c188
-rw-r--r--drivers/pcmcia/db1xxx_ss.c623
-rw-r--r--drivers/pcmcia/xxs1500_ss.c350
-rw-r--r--drivers/serial/8250.c15
-rw-r--r--drivers/spi/au1550_spi.c6
-rw-r--r--drivers/staging/octeon/Makefile1
-rw-r--r--drivers/staging/octeon/ethernet-defines.h34
-rw-r--r--drivers/staging/octeon/ethernet-mdio.c6
-rw-r--r--drivers/staging/octeon/ethernet-mdio.h1
-rw-r--r--drivers/staging/octeon/ethernet-mem.c124
-rw-r--r--drivers/staging/octeon/ethernet-proc.c144
-rw-r--r--drivers/staging/octeon/ethernet-proc.h29
-rw-r--r--drivers/staging/octeon/ethernet-rgmii.c56
-rw-r--r--drivers/staging/octeon/ethernet-rx.c384
-rw-r--r--drivers/staging/octeon/ethernet-rx.h25
-rw-r--r--drivers/staging/octeon/ethernet-sgmii.c1
-rw-r--r--drivers/staging/octeon/ethernet-spi.c1
-rw-r--r--drivers/staging/octeon/ethernet-tx.c441
-rw-r--r--drivers/staging/octeon/ethernet-tx.h29
-rw-r--r--drivers/staging/octeon/ethernet-util.h13
-rw-r--r--drivers/staging/octeon/ethernet-xaui.c1
-rw-r--r--drivers/staging/octeon/ethernet.c254
-rw-r--r--drivers/staging/octeon/octeon-ethernet.h58
-rw-r--r--drivers/staging/sm7xx/smtc2d.c2
-rw-r--r--drivers/staging/sm7xx/smtc2d.h2
-rw-r--r--drivers/staging/sm7xx/smtcfb.c2
-rw-r--r--drivers/staging/sm7xx/smtcfb.h2
-rw-r--r--drivers/watchdog/ar7_wdt.c18
47 files changed, 2682 insertions, 1959 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 5f318ce29770..737f05200b1d 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -564,6 +564,16 @@ config I2C_VERSATILE
This driver can also be built as a module. If so, the module
will be called i2c-versatile.
+config I2C_OCTEON
+ tristate "Cavium OCTEON I2C bus support"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Say yes if you want to support the I2C serial bus on Cavium
+ OCTEON SOC.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-octeon.
+
comment "External I2C/SMBus adapter drivers"
config I2C_PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 302c551977bb..c2c4ea1908d8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
+obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
new file mode 100644
index 000000000000..60375504fa49
--- /dev/null
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -0,0 +1,651 @@
+/*
+ * (C) Copyright 2009-2010
+ * Nokia Siemens Networks, michael.lawnick.ext@nsn.com
+ *
+ * Portions Copyright (C) 2010 Cavium Networks, Inc.
+ *
+ * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <asm/octeon/octeon.h>
+
+#define DRV_NAME "i2c-octeon"
+
+/* The previous out-of-tree version was implicitly version 1.0. */
+#define DRV_VERSION "2.0"
+
+/* register offsets */
+#define SW_TWSI 0x00
+#define TWSI_INT 0x10
+
+/* Controller command patterns */
+#define SW_TWSI_V 0x8000000000000000ull
+#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull
+#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull
+#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull
+#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull
+#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull
+#define SW_TWSI_R 0x0100000000000000ull
+
+/* Controller command and status bits */
+#define TWSI_CTL_CE 0x80
+#define TWSI_CTL_ENAB 0x40
+#define TWSI_CTL_STA 0x20
+#define TWSI_CTL_STP 0x10
+#define TWSI_CTL_IFLG 0x08
+#define TWSI_CTL_AAK 0x04
+
+/* Some status values */
+#define STAT_START 0x08
+#define STAT_RSTART 0x10
+#define STAT_TXADDR_ACK 0x18
+#define STAT_TXDATA_ACK 0x28
+#define STAT_RXADDR_ACK 0x40
+#define STAT_RXDATA_ACK 0x50
+#define STAT_IDLE 0xF8
+
+struct octeon_i2c {
+ wait_queue_head_t queue;
+ struct i2c_adapter adap;
+ int irq;
+ int twsi_freq;
+ int sys_freq;
+ resource_size_t twsi_phys;
+ void __iomem *twsi_base;
+ resource_size_t regsize;
+ struct device *dev;
+};
+
+/**
+ * octeon_i2c_write_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ * @data: Value to be written.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static void octeon_i2c_write_sw(struct octeon_i2c *i2c,
+ u64 eop_reg,
+ u8 data)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI);
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ } while ((tmp & SW_TWSI_V) != 0);
+}
+
+/**
+ * octeon_i2c_read_sw - write an I2C core register.
+ * @i2c: The struct octeon_i2c.
+ * @eop_reg: Register selector.
+ *
+ * Returns the data.
+ *
+ * The I2C core registers are accessed indirectly via the SW_TWSI CSR.
+ */
+static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg)
+{
+ u64 tmp;
+
+ __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI);
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI);
+ } while ((tmp & SW_TWSI_V) != 0);
+
+ return tmp & 0xFF;
+}
+
+/**
+ * octeon_i2c_write_int - write the TWSI_INT register
+ * @i2c: The struct octeon_i2c.
+ * @data: Value to be written.
+ */
+static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data)
+{
+ u64 tmp;
+
+ __raw_writeq(data, i2c->twsi_base + TWSI_INT);
+ tmp = __raw_readq(i2c->twsi_base + TWSI_INT);
+}
+
+/**
+ * octeon_i2c_int_enable - enable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ *
+ * The interrupt will be asserted when there is non-STAT_IDLE state in
+ * the SW_TWSI_EOP_TWSI_STAT register.
+ */
+static void octeon_i2c_int_enable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, 0x40);
+}
+
+/**
+ * octeon_i2c_int_disable - disable the TS interrupt.
+ * @i2c: The struct octeon_i2c.
+ */
+static void octeon_i2c_int_disable(struct octeon_i2c *i2c)
+{
+ octeon_i2c_write_int(i2c, 0);
+}
+
+/**
+ * octeon_i2c_unblock - unblock the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * If there was a reset while a device was driving 0 to bus,
+ * bus is blocked. We toggle it free manually by some clock
+ * cycles and send a stop.
+ */
+static void octeon_i2c_unblock(struct octeon_i2c *i2c)
+{
+ int i;
+
+ dev_dbg(i2c->dev, "%s\n", __func__);
+ for (i = 0; i < 9; i++) {
+ octeon_i2c_write_int(i2c, 0x0);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x200);
+ udelay(5);
+ }
+ octeon_i2c_write_int(i2c, 0x300);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x100);
+ udelay(5);
+ octeon_i2c_write_int(i2c, 0x0);
+}
+
+/**
+ * octeon_i2c_isr - the interrupt service routine.
+ * @int: The irq, unused.
+ * @dev_id: Our struct octeon_i2c.
+ */
+static irqreturn_t octeon_i2c_isr(int irq, void *dev_id)
+{
+ struct octeon_i2c *i2c = dev_id;
+
+ octeon_i2c_int_disable(i2c);
+ wake_up_interruptible(&i2c->queue);
+
+ return IRQ_HANDLED;
+}
+
+
+static int octeon_i2c_test_iflg(struct octeon_i2c *i2c)
+{
+ return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0;
+}
+
+/**
+ * octeon_i2c_wait - wait for the IFLG to be set.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_wait(struct octeon_i2c *i2c)
+{
+ int result;
+
+ octeon_i2c_int_enable(i2c);
+
+ result = wait_event_interruptible_timeout(i2c->queue,
+ octeon_i2c_test_iflg(i2c),
+ i2c->adap.timeout);
+
+ octeon_i2c_int_disable(i2c);
+
+ if (result < 0) {
+ dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__);
+ return result;
+ } else if (result == 0) {
+ dev_dbg(i2c->dev, "%s: timeout\n", __func__);
+ result = -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_start - send START to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_start(struct octeon_i2c *i2c)
+{
+ u8 data;
+ int result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+ result = octeon_i2c_wait(i2c);
+ if (result) {
+ if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) {
+ /*
+ * Controller refused to send start flag May
+ * be a client is holding SDA low - let's try
+ * to free it.
+ */
+ octeon_i2c_unblock(i2c);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STA);
+
+ result = octeon_i2c_wait(i2c);
+ }
+ if (result)
+ return result;
+ }
+
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((data != STAT_START) && (data != STAT_RSTART)) {
+ dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_stop - send STOP to the bus.
+ * @i2c: The struct octeon_i2c.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_stop(struct octeon_i2c *i2c)
+{
+ u8 data;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_STP);
+
+ data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+
+ if (data != STAT_IDLE) {
+ dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_write - send data to the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the data to be sent.
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_write(struct octeon_i2c *i2c, int target,
+ const u8 *data, int length)
+{
+ int i, result;
+ u8 tmp;
+
+ result = octeon_i2c_start(i2c);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) {
+ dev_err(i2c->dev,
+ "%s: bad status before write (0x%x)\n",
+ __func__, tmp);
+ return -EIO;
+ }
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+ }
+
+ return 0;
+}
+
+/**
+ * octeon_i2c_read - receive data from the bus.
+ * @i2c: The struct octeon_i2c.
+ * @target: Target address.
+ * @data: Pointer to the location to store the datae .
+ * @length: Length of the data.
+ *
+ * The address is sent over the bus, then the data is read.
+ *
+ * Returns 0 on success, otherwise a negative errno.
+ */
+static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
+ u8 *data, int length)
+{
+ int i, result;
+ u8 tmp;
+
+ if (length < 1)
+ return -EINVAL;
+
+ result = octeon_i2c_start(i2c);
+ if (result)
+ return result;
+
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ for (i = 0; i < length; i++) {
+ tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) {
+ dev_err(i2c->dev,
+ "%s: bad status before read (0x%x)\n",
+ __func__, tmp);
+ return -EIO;
+ }
+
+ if (i+1 < length)
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB | TWSI_CTL_AAK);
+ else
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL,
+ TWSI_CTL_ENAB);
+
+ result = octeon_i2c_wait(i2c);
+ if (result)
+ return result;
+
+ data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA);
+ }
+ return 0;
+}
+
+/**
+ * octeon_i2c_xfer - The driver's master_xfer function.
+ * @adap: Pointer to the i2c_adapter structure.
+ * @msgs: Pointer to the messages to be processed.
+ * @num: Length of the MSGS array.
+ *
+ * Returns the number of messages processed, or a negative errno on
+ * failure.
+ */
+static int octeon_i2c_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msgs,
+ int num)
+{
+ struct i2c_msg *pmsg;
+ int i;
+ int ret = 0;
+ struct octeon_i2c *i2c = i2c_get_adapdata(adap);
+
+ for (i = 0; ret == 0 && i < num; i++) {
+ pmsg = &msgs[i];
+ dev_dbg(i2c->dev,
+ "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n",
+ pmsg->flags & I2C_M_RD ? "read" : "write",
+ pmsg->len, pmsg->addr, i + 1, num);
+ if (pmsg->flags & I2C_M_RD)
+ ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ else
+ ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ }
+ octeon_i2c_stop(i2c);
+
+ return (ret != 0) ? ret : num;
+}
+
+static u32 octeon_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm octeon_i2c_algo = {
+ .master_xfer = octeon_i2c_xfer,
+ .functionality = octeon_i2c_functionality,
+};
+
+static struct i2c_adapter octeon_i2c_ops = {
+ .owner = THIS_MODULE,
+ .name = "OCTEON adapter",
+ .algo = &octeon_i2c_algo,
+ .timeout = 2,
+};
+
+/**
+ * octeon_i2c_setclock - Calculate and set clock divisors.
+ */
+static int __init octeon_i2c_setclock(struct octeon_i2c *i2c)
+{
+ int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff;
+ int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000;
+
+ for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) {
+ /*
+ * An mdiv value of less than 2 seems to not work well
+ * with ds1337 RTCs, so we constrain it to larger
+ * values.
+ */
+ for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) {
+ /*
+ * For given ndiv and mdiv values check the
+ * two closest thp values.
+ */
+ tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10;
+ tclk *= (1 << ndiv_idx);
+ thp_base = (i2c->sys_freq / (tclk * 2)) - 1;
+ for (inc = 0; inc <= 1; inc++) {
+ thp_idx = thp_base + inc;
+ if (thp_idx < 5 || thp_idx > 0xff)
+ continue;
+
+ foscl = i2c->sys_freq / (2 * (thp_idx + 1));
+ foscl = foscl / (1 << ndiv_idx);
+ foscl = foscl / (mdiv_idx + 1) / 10;
+ diff = abs(foscl - i2c->twsi_freq);
+ if (diff < delta_hz) {
+ delta_hz = diff;
+ thp = thp_idx;
+ mdiv = mdiv_idx;
+ ndiv = ndiv_idx;
+ }
+ }
+ }
+ }
+ octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp);
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv);
+
+ return 0;
+}
+
+static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c)
+{
+ u8 status;
+ int tries;
+
+ /* disable high level controller, enable bus access */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB);
+
+ /* reset controller */
+ octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0);
+
+ for (tries = 10; tries; tries--) {
+ udelay(1);
+ status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT);
+ if (status == STAT_IDLE)
+ return 0;
+ }
+ dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status);
+ return -EIO;
+}
+
+static int __devinit octeon_i2c_probe(struct platform_device *pdev)
+{
+ int irq, result = 0;
+ struct octeon_i2c *i2c;
+ struct octeon_i2c_data *i2c_data;
+ struct resource *res_mem;
+
+ /* All adaptors have an irq. */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ return irq;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c) {
+ dev_err(&pdev->dev, "kzalloc failed\n");
+ result = -ENOMEM;
+ goto out;
+ }
+ i2c->dev = &pdev->dev;
+ i2c_data = pdev->dev.platform_data;
+
+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (res_mem == NULL) {
+ dev_err(i2c->dev, "found no memory resource\n");
+ result = -ENXIO;
+ goto fail_region;
+ }
+
+ if (i2c_data == NULL) {
+ dev_err(i2c->dev, "no I2C frequency data\n");
+ result = -ENXIO;
+ goto fail_region;
+ }
+
+ i2c->twsi_phys = res_mem->start;
+ i2c->regsize = resource_size(res_mem);
+ i2c->twsi_freq = i2c_data->i2c_freq;
+ i2c->sys_freq = i2c_data->sys_freq;
+
+ if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) {
+ dev_err(i2c->dev, "request_mem_region failed\n");
+ goto fail_region;
+ }
+ i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize);
+
+ init_waitqueue_head(&i2c->queue);
+
+ i2c->irq = irq;
+
+ result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to attach interrupt\n");
+ goto fail_irq;
+ }
+
+ result = octeon_i2c_initlowlevel(i2c);
+ if (result) {
+ dev_err(i2c->dev, "init low level failed\n");
+ goto fail_add;
+ }
+
+ result = octeon_i2c_setclock(i2c);
+ if (result) {
+ dev_err(i2c->dev, "clock init failed\n");
+ goto fail_add;
+ }
+
+ i2c->adap = octeon_i2c_ops;
+ i2c->adap.dev.parent = &pdev->dev;
+ i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ platform_set_drvdata(pdev, i2c);
+
+ result = i2c_add_numbered_adapter(&i2c->adap);
+ if (result < 0) {
+ dev_err(i2c->dev, "failed to add adapter\n");
+ goto fail_add;
+ }
+
+ dev_info(i2c->dev, "version %s\n", DRV_VERSION);
+
+ return result;
+
+fail_add:
+ platform_set_drvdata(pdev, NULL);
+ free_irq(i2c->irq, i2c);
+fail_irq:
+ iounmap(i2c->twsi_base);
+ release_mem_region(i2c->twsi_phys, i2c->regsize);
+fail_region:
+ kfree(i2c);
+out:
+ return result;
+};
+
+static int __devexit octeon_i2c_remove(struct platform_device *pdev)
+{
+ struct octeon_i2c *i2c = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&i2c->adap);
+ platform_set_drvdata(pdev, NULL);
+ free_irq(i2c->irq, i2c);
+ iounmap(i2c->twsi_base);
+ release_mem_region(i2c->twsi_phys, i2c->regsize);
+ kfree(i2c);
+ return 0;
+};
+
+static struct platform_driver octeon_i2c_driver = {
+ .probe = octeon_i2c_probe,
+ .remove = __devexit_p(octeon_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init octeon_i2c_init(void)
+{
+ int rv;
+
+ rv = platform_driver_register(&octeon_i2c_driver);
+ return rv;
+}
+
+static void __exit octeon_i2c_exit(void)
+{
+ platform_driver_unregister(&octeon_i2c_driver);
+}
+
+MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>");
+MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_ALIAS("platform:" DRV_NAME);
+
+module_init(octeon_i2c_init);
+module_exit(octeon_i2c_exit);
diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c
index 87cef0c440ad..349a67bf1a36 100644
--- a/drivers/ide/au1xxx-ide.c
+++ b/drivers/ide/au1xxx-ide.c
@@ -56,8 +56,8 @@ static inline void auide_insw(unsigned long port, void *addr, u32 count)
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1,
- DDMA_FLAGS_NOIE)) {
+ if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr),
+ count << 1, DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
@@ -74,8 +74,8 @@ static inline void auide_outsw(unsigned long port, void *addr, u32 count)
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- if(!put_source_flags(ahwif->tx_chan, (void*)addr,
- count << 1, DDMA_FLAGS_NOIE)) {
+ if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr),
+ count << 1, DDMA_FLAGS_NOIE)) {
printk(KERN_ERR "%s failed %d\n", __func__, __LINE__);
return;
}
@@ -246,17 +246,14 @@ static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd)
flags = DDMA_FLAGS_NOIE;
if (iswrite) {
- if(!put_source_flags(ahwif->tx_chan,
- (void*) sg_virt(sg),
- tc, flags)) {
+ if (!au1xxx_dbdma_put_source(ahwif->tx_chan,
+ sg_phys(sg), tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__func__, __LINE__);
}
- } else
- {
- if(!put_dest_flags(ahwif->rx_chan,
- (void*) sg_virt(sg),
- tc, flags)) {
+ } else {
+ if (!au1xxx_dbdma_put_dest(ahwif->rx_chan,
+ sg_phys(sg), tc, flags)) {
printk(KERN_ERR "%s failed %d\n",
__func__, __LINE__);
}
diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c
index d3f55615c099..57b21198828f 100644
--- a/drivers/mmc/host/au1xmmc.c
+++ b/drivers/mmc/host/au1xmmc.c
@@ -650,11 +650,11 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host,
flags = DDMA_FLAGS_IE;
if (host->flags & HOST_F_XMIT) {
- ret = au1xxx_dbdma_put_source_flags(channel,
- (void *)sg_virt(sg), len, flags);
+ ret = au1xxx_dbdma_put_source(channel,
+ sg_phys(sg), len, flags);
} else {
- ret = au1xxx_dbdma_put_dest_flags(channel,
- (void *)sg_virt(sg), len, flags);
+ ret = au1xxx_dbdma_put_dest(channel,
+ sg_phys(sg), len, flags);
}
if (!ret)
@@ -1017,6 +1017,10 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev)
} else
mmc->caps |= MMC_CAP_NEEDS_POLL;
+ /* platform may not be able to use all advertised caps */
+ if (host->platdata)
+ mmc->caps &= ~(host->platdata->mask_host_caps);
+
tasklet_init(&host->data_task, au1xmmc_tasklet_data,
(unsigned long)host);
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index 2de0cc823d60..2bb03a8b9ef1 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -251,12 +251,6 @@ config MTD_NETtel
help
Support for flash chips on NETtel/SecureEdge/SnapGear boards.
-config MTD_ALCHEMY
- tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support"
- depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI
- help
- Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
-
config MTD_DILNETPC
tristate "CFI Flash device mapped on DIL/Net PC"
depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index ce315214ff2b..a44919f3f3d2 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -40,7 +40,6 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o
obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o
obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
obj-$(CONFIG_MTD_PCI) += pci.o
-obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o
obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o
obj-$(CONFIG_MTD_EDB7312) += edb7312.o
obj-$(CONFIG_MTD_IMPA7) += impa7.o
diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c
deleted file mode 100644
index 845ad4f2a542..000000000000
--- a/drivers/mtd/maps/alchemy-flash.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * Flash memory access on AMD Alchemy evaluation boards
- *
- * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com>
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_MIPS_PB1000
-#define BOARD_MAP_NAME "Pb1000 Flash"
-#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1500
-#define BOARD_MAP_NAME "Pb1500 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1100
-#define BOARD_MAP_NAME "Pb1100 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1550
-#define BOARD_MAP_NAME "Pb1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_PB1200
-#define BOARD_MAP_NAME "Pb1200 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1000
-#define BOARD_MAP_NAME "Db1000 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1500
-#define BOARD_MAP_NAME "Db1500 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1100
-#define BOARD_MAP_NAME "Db1100 Flash"
-#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1550
-#define BOARD_MAP_NAME "Db1550 Flash"
-#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#define BOARD_MAP_NAME "Db1200 Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_BOSPORUS
-#define BOARD_MAP_NAME "Bosporus Flash"
-#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */
-#define BOARD_FLASH_WIDTH 2 /* 16-bits */
-#endif
-
-#ifdef CONFIG_MIPS_MIRAGE
-#define BOARD_MAP_NAME "Mirage Flash"
-#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */
-#define BOARD_FLASH_WIDTH 4 /* 32-bits */
-#define USE_LOCAL_ACCESSORS /* why? */
-#endif
-
-static struct map_info alchemy_map = {
- .name = BOARD_MAP_NAME,
-};
-
-static struct mtd_partition alchemy_partitions[] = {
- {
- .name = "User FS",
- .size = BOARD_FLASH_SIZE - 0x00400000,
- .offset = 0x0000000
- },{
- .name = "YAMON",
- .size = 0x0100000,
- .offset = MTDPART_OFS_APPEND,
- .mask_flags = MTD_WRITEABLE
- },{
- .name = "raw kernel",
- .size = (0x300000 - 0x40000), /* last 256KB is yamon env */
- .offset = MTDPART_OFS_APPEND,
- }
-};
-
-static struct mtd_info *mymtd;
-
-static int __init alchemy_mtd_init(void)
-{
- struct mtd_partition *parts;
- int nb_parts = 0;
- unsigned long window_addr;
- unsigned long window_size;
-
- /* Default flash buswidth */
- alchemy_map.bankwidth = BOARD_FLASH_WIDTH;
-
- window_addr = 0x20000000 - BOARD_FLASH_SIZE;
- window_size = BOARD_FLASH_SIZE;
-
- /*
- * Static partition definition selection
- */
- parts = alchemy_partitions;
- nb_parts = ARRAY_SIZE(alchemy_partitions);
- alchemy_map.size = window_size;
-
- /*
- * Now let's probe for the actual flash. Do it here since
- * specific machine settings might have been set above.
- */
- printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n",
- alchemy_map.bankwidth*8);
- alchemy_map.virt = ioremap(window_addr, window_size);
- mymtd = do_map_probe("cfi_probe", &alchemy_map);
- if (!mymtd) {
- iounmap(alchemy_map.virt);
- return -ENXIO;
- }
- mymtd->owner = THIS_MODULE;
-
- add_mtd_partitions(mymtd, parts, nb_parts);
- return 0;
-}
-
-static void __exit alchemy_mtd_cleanup(void)
-{
- if (mymtd) {
- del_mtd_partitions(mymtd);
- map_destroy(mymtd);
- iounmap(alchemy_map.virt);
- }
-}
-
-module_init(alchemy_mtd_init);
-module_exit(alchemy_mtd_cleanup);
-
-MODULE_AUTHOR("Embedded Alley Solutions, Inc");
-MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
index 92c334ff4508..43d46e424040 100644
--- a/drivers/mtd/nand/au1550nd.c
+++ b/drivers/mtd/nand/au1550nd.c
@@ -19,6 +19,7 @@
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
+#include <asm/mach-db1x00/bcsr.h>
/*
* MTD structure for NAND controller
@@ -475,7 +476,8 @@ static int __init au1xxx_nand_init(void)
/* set gpio206 high */
au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR);
- boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1);
+ boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1);
+
switch (boot_swapboot) {
case 0:
case 2:
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 6bac04603a88..6e5a68ecde09 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -55,6 +55,7 @@
#include <linux/delay.h>
#include <linux/crc32.h>
#include <linux/phy.h>
+#include <linux/platform_device.h>
#include <asm/cpu.h>
#include <asm/mipsregs.h>
@@ -63,6 +64,7 @@
#include <asm/processor.h>
#include <au1000.h>
+#include <au1xxx_eth.h>
#include <prom.h>
#include "au1000_eth.h"
@@ -112,15 +114,15 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
*
* PHY detection algorithm
*
- * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is
+ * If phy_static_config is undefined, the PHY setup is
* autodetected:
*
* mii_probe() first searches the current MAC's MII bus for a PHY,
- * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is
+ * selecting the first (or last, if phy_search_highest_addr is
* defined) PHY address not already claimed by another netdev.
*
* If nothing was found that way when searching for the 2nd ethernet
- * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then
+ * controller's PHY and phy1_search_mac0 is defined, then
* the first MII bus is searched as well for an unclaimed PHY; this is
* needed in case of a dual-PHY accessible only through the MAC0's MII
* bus.
@@ -129,9 +131,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
* controller is not registered to the network subsystem.
*/
-/* autodetection defaults */
-#undef AU1XXX_PHY_SEARCH_HIGHEST_ADDR
-#define AU1XXX_PHY1_SEARCH_ON_MAC0
+/* autodetection defaults: phy1_search_mac0 */
/* static PHY setup
*
@@ -148,29 +148,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES];
* specific irq-map
*/
-#if defined(CONFIG_MIPS_BOSPORUS)
-/*
- * Micrel/Kendin 5 port switch attached to MAC0,
- * MAC0 is associated with PHY address 5 (== WAN port)
- * MAC1 is not associated with any PHY, since it's connected directly
- * to the switch.
- * no interrupts are used
- */
-# define AU1XXX_PHY_STATIC_CONFIG
-
-# define AU1XXX_PHY0_ADDR 5
-# define AU1XXX_PHY0_BUSID 0
-# undef AU1XXX_PHY0_IRQ
-
-# undef AU1XXX_PHY1_ADDR
-# undef AU1XXX_PHY1_BUSID
-# undef AU1XXX_PHY1_IRQ
-#endif
-
-#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0)
-# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet
-#endif
-
static void enable_mac(struct net_device *dev, int force_reset)
{
unsigned long flags;
@@ -390,67 +367,55 @@ static int mii_probe (struct net_device *dev)
struct au1000_private *const aup = netdev_priv(dev);
struct phy_device *phydev = NULL;
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
- BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
+ if (aup->phy_static_config) {
+ BUG_ON(aup->mac_id < 0 || aup->mac_id > 1);
- if(aup->mac_id == 0) { /* get PHY0 */
-# if defined(AU1XXX_PHY0_ADDR)
- phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus->phy_map[AU1XXX_PHY0_ADDR];
-# else
- printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
- dev->name);
- return 0;
-# endif /* defined(AU1XXX_PHY0_ADDR) */
- } else if (aup->mac_id == 1) { /* get PHY1 */
-# if defined(AU1XXX_PHY1_ADDR)
- phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus->phy_map[AU1XXX_PHY1_ADDR];
-# else
- printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
- dev->name);
+ if (aup->phy_addr)
+ phydev = aup->mii_bus->phy_map[aup->phy_addr];
+ else
+ printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n",
+ dev->name);
return 0;
-# endif /* defined(AU1XXX_PHY1_ADDR) */
- }
-
-#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */
- int phy_addr;
-
- /* find the first (lowest address) PHY on the current MAC's MII bus */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
- if (aup->mii_bus->phy_map[phy_addr]) {
- phydev = aup->mii_bus->phy_map[phy_addr];
-# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR)
- break; /* break out with first one found */
-# endif
- }
+ } else {
+ int phy_addr;
+
+ /* find the first (lowest address) PHY on the current MAC's MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++)
+ if (aup->mii_bus->phy_map[phy_addr]) {
+ phydev = aup->mii_bus->phy_map[phy_addr];
+ if (!aup->phy_search_highest_addr)
+ break; /* break out with first one found */
+ }
-# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0)
- /* try harder to find a PHY */
- if (!phydev && (aup->mac_id == 1)) {
- /* no PHY found, maybe we have a dual PHY? */
- printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
- "let's see if it's attached to MAC0...\n");
+ if (aup->phy1_search_mac0) {
+ /* try harder to find a PHY */
+ if (!phydev && (aup->mac_id == 1)) {
+ /* no PHY found, maybe we have a dual PHY? */
+ printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, "
+ "let's see if it's attached to MAC0...\n");
- BUG_ON(!au_macs[0]);
+ /* find the first (lowest address) non-attached PHY on
+ * the MAC0 MII bus */
+ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
+ struct phy_device *const tmp_phydev =
+ aup->mii_bus->phy_map[phy_addr];
- /* find the first (lowest address) non-attached PHY on
- * the MAC0 MII bus */
- for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
- struct phy_device *const tmp_phydev =
- au_macs[0]->mii_bus->phy_map[phy_addr];
+ if (aup->mac_id == 1)
+ break;
- if (!tmp_phydev)
- continue; /* no PHY here... */
+ if (!tmp_phydev)
+ continue; /* no PHY here... */
- if (tmp_phydev->attached_dev)
- continue; /* already claimed by MAC0 */
+ if (tmp_phydev->attached_dev)
+ continue; /* already claimed by MAC0 */
- phydev = tmp_phydev;
- break; /* found it */
+ phydev = tmp_phydev;
+ break; /* found it */
+ }
+ }
}
}
-# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */
-#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */
if (!phydev) {
printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name);
return -1;
@@ -578,31 +543,6 @@ setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base)
}
}
-static struct {
- u32 base_addr;
- u32 macen_addr;
- int irq;
- struct net_device *dev;
-} iflist[2] = {
-#ifdef CONFIG_SOC_AU1000
- {AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT},
- {AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1100
- {AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1500
- {AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT},
- {AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT}
-#endif
-#ifdef CONFIG_SOC_AU1550
- {AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT},
- {AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT}
-#endif
-};
-
-static int num_ifs;
-
/*
* ethtool operations
*/
@@ -711,7 +651,6 @@ static int au1000_init(struct net_device *dev)
static inline void update_rx_stats(struct net_device *dev, u32 status)
{
- struct au1000_private *aup = netdev_priv(dev);
struct net_device_stats *ps = &dev->stats;
ps->rx_packets++;
@@ -969,7 +908,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev)
}
pDB = aup->tx_db_inuse[aup->tx_head];
- skb_copy_from_linear_data(skb, pDB->vaddr, skb->len);
+ skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len);
if (skb->len < ETH_ZLEN) {
for (i=skb->len; i<ETH_ZLEN; i++) {
((char *)pDB->vaddr)[i] = 0;
@@ -1058,53 +997,59 @@ static const struct net_device_ops au1000_netdev_ops = {
.ndo_change_mtu = eth_change_mtu,
};
-static struct net_device * au1000_probe(int port_num)
+static int __devinit au1000_probe(struct platform_device *pdev)
{
static unsigned version_printed = 0;
struct au1000_private *aup = NULL;
+ struct au1000_eth_platform_data *pd;
struct net_device *dev = NULL;
db_dest_t *pDB, *pDBfree;
+ int irq, i, err = 0;
+ struct resource *base, *macen;
char ethaddr[6];
- int irq, i, err;
- u32 base, macen;
- if (port_num >= NUM_ETH_INTERFACES)
- return NULL;
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!base) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve base register\n");
+ err = -ENODEV;
+ goto out;
+ }
- base = CPHYSADDR(iflist[port_num].base_addr );
- macen = CPHYSADDR(iflist[port_num].macen_addr);
- irq = iflist[port_num].irq;
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!macen) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve MAC Enable register\n");
+ err = -ENODEV;
+ goto out;
+ }
- if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") ||
- !request_mem_region(macen, 4, "Au1x00 ENET"))
- return NULL;
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ printk(KERN_ERR DRV_NAME ": failed to retrieve IRQ\n");
+ err = -ENODEV;
+ goto out;
+ }
- if (version_printed++ == 0)
- printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+ if (!request_mem_region(base->start, resource_size(base), pdev->name)) {
+ printk(KERN_ERR DRV_NAME ": failed to request memory region for base registers\n");
+ err = -ENXIO;
+ goto out;
+ }
+
+ if (!request_mem_region(macen->start, resource_size(macen), pdev->name)) {
+ printk(KERN_ERR DRV_NAME ": failed to request memory region for MAC enable register\n");
+ err = -ENXIO;
+ goto err_request;
+ }
dev = alloc_etherdev(sizeof(struct au1000_private));
if (!dev) {
printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME);
- return NULL;
+ err = -ENOMEM;
+ goto err_alloc;
}
- dev->base_addr = base;
- dev->irq = irq;
- dev->netdev_ops = &au1000_netdev_ops;
- SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
- dev->watchdog_timeo = ETH_TX_TIMEOUT;
-
- err = register_netdev(dev);
- if (err != 0) {
- printk(KERN_ERR "%s: Cannot register net device, error %d\n",
- DRV_NAME, err);
- free_netdev(dev);
- return NULL;
- }
-
- printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n",
- dev->name, base, irq);
-
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ platform_set_drvdata(pdev, dev);
aup = netdev_priv(dev);
spin_lock_init(&aup->lock);
@@ -1115,21 +1060,29 @@ static struct net_device * au1000_probe(int port_num)
(NUM_TX_BUFFS + NUM_RX_BUFFS),
&aup->dma_addr, 0);
if (!aup->vaddr) {
- free_netdev(dev);
- release_mem_region( base, MAC_IOSIZE);
- release_mem_region(macen, 4);
- return NULL;
+ printk(KERN_ERR DRV_NAME ": failed to allocate data buffers\n");
+ err = -ENOMEM;
+ goto err_vaddr;
}
/* aup->mac is the base address of the MAC's registers */
- aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr;
+ aup->mac = (volatile mac_reg_t *)ioremap_nocache(base->start, resource_size(base));
+ if (!aup->mac) {
+ printk(KERN_ERR DRV_NAME ": failed to ioremap MAC registers\n");
+ err = -ENXIO;
+ goto err_remap1;
+ }
- /* Setup some variables for quick register address access */
- aup->enable = (volatile u32 *)iflist[port_num].macen_addr;
- aup->mac_id = port_num;
- au_macs[port_num] = aup;
+ /* Setup some variables for quick register address access */
+ aup->enable = (volatile u32 *)ioremap_nocache(macen->start, resource_size(macen));
+ if (!aup->enable) {
+ printk(KERN_ERR DRV_NAME ": failed to ioremap MAC enable register\n");
+ err = -ENXIO;
+ goto err_remap2;
+ }
+ aup->mac_id = pdev->id;
- if (port_num == 0) {
+ if (pdev->id == 0) {
if (prom_get_ethernet_addr(ethaddr) == 0)
memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr));
else {
@@ -1139,7 +1092,7 @@ static struct net_device * au1000_probe(int port_num)
}
setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR);
- } else if (port_num == 1)
+ } else if (pdev->id == 1)
setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR);
/*
@@ -1147,14 +1100,37 @@ static struct net_device * au1000_probe(int port_num)
* to match those that are printed on their stickers
*/
memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr));
- dev->dev_addr[5] += port_num;
+ dev->dev_addr[5] += pdev->id;
*aup->enable = 0;
aup->mac_enabled = 0;
+ pd = pdev->dev.platform_data;
+ if (!pd) {
+ printk(KERN_INFO DRV_NAME ": no platform_data passed, PHY search on MAC0\n");
+ aup->phy1_search_mac0 = 1;
+ } else {
+ aup->phy_static_config = pd->phy_static_config;
+ aup->phy_search_highest_addr = pd->phy_search_highest_addr;
+ aup->phy1_search_mac0 = pd->phy1_search_mac0;
+ aup->phy_addr = pd->phy_addr;
+ aup->phy_busid = pd->phy_busid;
+ aup->phy_irq = pd->phy_irq;
+ }
+
+ if (aup->phy_busid && aup->phy_busid > 0) {
+ printk(KERN_ERR DRV_NAME ": MAC0-associated PHY attached 2nd MACs MII"
+ "bus not supported yet\n");
+ err = -ENODEV;
+ goto err_mdiobus_alloc;
+ }
+
aup->mii_bus = mdiobus_alloc();
- if (aup->mii_bus == NULL)
- goto err_out;
+ if (aup->mii_bus == NULL) {
+ printk(KERN_ERR DRV_NAME ": failed to allocate mdiobus structure\n");
+ err = -ENOMEM;
+ goto err_mdiobus_alloc;
+ }
aup->mii_bus->priv = dev;
aup->mii_bus->read = au1000_mdiobus_read;
@@ -1168,23 +1144,19 @@ static struct net_device * au1000_probe(int port_num)
for(i = 0; i < PHY_MAX_ADDR; ++i)
aup->mii_bus->irq[i] = PHY_POLL;
-
/* if known, set corresponding PHY IRQs */
-#if defined(AU1XXX_PHY_STATIC_CONFIG)
-# if defined(AU1XXX_PHY0_IRQ)
- if (AU1XXX_PHY0_BUSID == aup->mac_id)
- aup->mii_bus->irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ;
-# endif
-# if defined(AU1XXX_PHY1_IRQ)
- if (AU1XXX_PHY1_BUSID == aup->mac_id)
- aup->mii_bus->irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ;
-# endif
-#endif
- mdiobus_register(aup->mii_bus);
+ if (aup->phy_static_config)
+ if (aup->phy_irq && aup->phy_busid == aup->mac_id)
+ aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq;
+
+ err = mdiobus_register(aup->mii_bus);
+ if (err) {
+ printk(KERN_ERR DRV_NAME " failed to register MDIO bus\n");
+ goto err_mdiobus_reg;
+ }
- if (mii_probe(dev) != 0) {
+ if (mii_probe(dev) != 0)
goto err_out;
- }
pDBfree = NULL;
/* setup the data buffer descriptors and attach a buffer to each one */
@@ -1216,19 +1188,35 @@ static struct net_device * au1000_probe(int port_num)
aup->tx_db_inuse[i] = pDB;
}
+ dev->base_addr = base->start;
+ dev->irq = irq;
+ dev->netdev_ops = &au1000_netdev_ops;
+ SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops);
+ dev->watchdog_timeo = ETH_TX_TIMEOUT;
+
/*
* The boot code uses the ethernet controller, so reset it to start
* fresh. au1000_init() expects that the device is in reset state.
*/
reset_mac(dev);
- return dev;
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR DRV_NAME "%s: Cannot register net device, aborting.\n",
+ dev->name);
+ goto err_out;
+ }
+
+ printk("%s: Au1xx0 Ethernet found at 0x%lx, irq %d\n",
+ dev->name, (unsigned long)base->start, irq);
+ if (version_printed++ == 0)
+ printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR);
+
+ return 0;
err_out:
- if (aup->mii_bus != NULL) {
+ if (aup->mii_bus != NULL)
mdiobus_unregister(aup->mii_bus);
- mdiobus_free(aup->mii_bus);
- }
/* here we should have a valid dev plus aup-> register addresses
* so we can reset the mac properly.*/
@@ -1242,67 +1230,84 @@ err_out:
if (aup->tx_db_inuse[i])
ReleaseDB(aup, aup->tx_db_inuse[i]);
}
+err_mdiobus_reg:
+ mdiobus_free(aup->mii_bus);
+err_mdiobus_alloc:
+ iounmap(aup->enable);
+err_remap2:
+ iounmap(aup->mac);
+err_remap1:
dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS),
(void *)aup->vaddr, aup->dma_addr);
- unregister_netdev(dev);
+err_vaddr:
free_netdev(dev);
- release_mem_region( base, MAC_IOSIZE);
- release_mem_region(macen, 4);
- return NULL;
+err_alloc:
+ release_mem_region(macen->start, resource_size(macen));
+err_request:
+ release_mem_region(base->start, resource_size(base));
+out:
+ return err;
}
-/*
- * Setup the base address and interrupt of the Au1xxx ethernet macs
- * based on cpu type and whether the interface is enabled in sys_pinfunc
- * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0.
- */
-static int __init au1000_init_module(void)
+static int __devexit au1000_remove(struct platform_device *pdev)
{
- int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4);
- struct net_device *dev;
- int i, found_one = 0;
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct au1000_private *aup = netdev_priv(dev);
+ int i;
+ struct resource *base, *macen;
- num_ifs = NUM_ETH_INTERFACES - ni;
+ platform_set_drvdata(pdev, NULL);
+
+ unregister_netdev(dev);
+ mdiobus_unregister(aup->mii_bus);
+ mdiobus_free(aup->mii_bus);
+
+ for (i = 0; i < NUM_RX_DMA; i++)
+ if (aup->rx_db_inuse[i])
+ ReleaseDB(aup, aup->rx_db_inuse[i]);
+
+ for (i = 0; i < NUM_TX_DMA; i++)
+ if (aup->tx_db_inuse[i])
+ ReleaseDB(aup, aup->tx_db_inuse[i]);
+
+ dma_free_noncoherent(NULL, MAX_BUF_SIZE *
+ (NUM_TX_BUFFS + NUM_RX_BUFFS),
+ (void *)aup->vaddr, aup->dma_addr);
+
+ iounmap(aup->mac);
+ iounmap(aup->enable);
+
+ base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(base->start, resource_size(base));
+
+ macen = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ release_mem_region(macen->start, resource_size(macen));
+
+ free_netdev(dev);
- for(i = 0; i < num_ifs; i++) {
- dev = au1000_probe(i);
- iflist[i].dev = dev;
- if (dev)
- found_one++;
- }
- if (!found_one)
- return -ENODEV;
return 0;
}
-static void __exit au1000_cleanup_module(void)
+static struct platform_driver au1000_eth_driver = {
+ .probe = au1000_probe,
+ .remove = __devexit_p(au1000_remove),
+ .driver = {
+ .name = "au1000-eth",
+ .owner = THIS_MODULE,
+ },
+};
+MODULE_ALIAS("platform:au1000-eth");
+
+
+static int __init au1000_init_module(void)
+{
+ return platform_driver_register(&au1000_eth_driver);
+}
+
+static void __exit au1000_exit_module(void)
{
- int i, j;
- struct net_device *dev;
- struct au1000_private *aup;
-
- for (i = 0; i < num_ifs; i++) {
- dev = iflist[i].dev;
- if (dev) {
- aup = netdev_priv(dev);
- unregister_netdev(dev);
- mdiobus_unregister(aup->mii_bus);
- mdiobus_free(aup->mii_bus);
- for (j = 0; j < NUM_RX_DMA; j++)
- if (aup->rx_db_inuse[j])
- ReleaseDB(aup, aup->rx_db_inuse[j]);
- for (j = 0; j < NUM_TX_DMA; j++)
- if (aup->tx_db_inuse[j])
- ReleaseDB(aup, aup->tx_db_inuse[j]);
- dma_free_noncoherent(NULL, MAX_BUF_SIZE *
- (NUM_TX_BUFFS + NUM_RX_BUFFS),
- (void *)aup->vaddr, aup->dma_addr);
- release_mem_region(dev->base_addr, MAC_IOSIZE);
- release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4);
- free_netdev(dev);
- }
- }
+ platform_driver_unregister(&au1000_eth_driver);
}
module_init(au1000_init_module);
-module_exit(au1000_cleanup_module);
+module_exit(au1000_exit_module);
diff --git a/drivers/net/au1000_eth.h b/drivers/net/au1000_eth.h
index 824ecd5ff3a8..f9d29a29b8fd 100644
--- a/drivers/net/au1000_eth.h
+++ b/drivers/net/au1000_eth.h
@@ -108,6 +108,15 @@ struct au1000_private {
struct phy_device *phy_dev;
struct mii_bus *mii_bus;
+ /* PHY configuration */
+ int phy_static_config;
+ int phy_search_highest_addr;
+ int phy1_search_mac0;
+
+ int phy_addr;
+ int phy_busid;
+ int phy_irq;
+
/* These variables are just for quick access to certain regs addresses. */
volatile mac_reg_t *mac; /* mac registers */
volatile u32 *enable; /* address of MAC Enable Register */
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 8d0be26f94e3..bf2072e54200 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -36,6 +36,7 @@
#include <linux/phy_fixed.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
+#include <linux/clk.h>
#include <asm/gpio.h>
#include <asm/atomic.h>
@@ -294,9 +295,16 @@ static int cpmac_mdio_write(struct mii_bus *bus, int phy_id,
static int cpmac_mdio_reset(struct mii_bus *bus)
{
+ struct clk *cpmac_clk;
+
+ cpmac_clk = clk_get(&bus->dev, "cpmac");
+ if (IS_ERR(cpmac_clk)) {
+ printk(KERN_ERR "unable to get cpmac clock\n");
+ return -1;
+ }
ar7_device_reset(AR7_RESET_BIT_MDIO);
cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE |
- MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1));
+ MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1));
return 0;
}
diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c
index 9b2eebdbb25b..b5cbd39d0685 100644
--- a/drivers/net/irda/au1k_ir.c
+++ b/drivers/net/irda/au1k_ir.c
@@ -36,6 +36,7 @@
#include <asm/pb1000.h>
#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
#include <asm/db1x00.h>
+#include <asm/mach-db1x00/bcsr.h>
#else
#error au1k_ir: unsupported board
#endif
@@ -66,10 +67,6 @@ static char version[] __devinitdata =
#define RUN_AT(x) (jiffies + (x))
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
-static BCSR * const bcsr = (BCSR *)0xAE000000;
-#endif
-
static DEFINE_SPINLOCK(ir_lock);
/*
@@ -282,9 +279,8 @@ static int au1k_irda_net_init(struct net_device *dev)
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
/* power on */
- bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL;
- au_sync();
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK,
+ BCSR_RESETS_IRDA_MODE_FULL);
#endif
return 0;
@@ -720,14 +716,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed)
if (speed == 4000000) {
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
- bcsr->resets |= BCSR_RESETS_FIR_SEL;
+ bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL);
#else /* Pb1000 and Pb1100 */
writel(1<<13, CPLD_AUX1);
#endif
}
else {
#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100)
- bcsr->resets &= ~BCSR_RESETS_FIR_SEL;
+ bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0);
#else /* Pb1000 and Pb1100 */
writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1);
#endif
diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig
index e8f35dac2d51..0a6601c76809 100644
--- a/drivers/pcmcia/Kconfig
+++ b/drivers/pcmcia/Kconfig
@@ -173,6 +173,27 @@ config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
+config PCMCIA_ALCHEMY_DEVBOARD
+ tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
+ depends on SOC_AU1X00 && PCMCIA
+ select 64BIT_PHYS_ADDR
+ help
+ Enable this driver of you want PCMCIA support on your Alchemy
+ Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board.
+ NOT suitable for the PB1000!
+
+ This driver is also available as a module called db1xxx_ss.ko
+
+config PCMCIA_XXS1500
+ tristate "MyCable XXS1500 PCMCIA socket support"
+ depends on PCMCIA && MIPS_XXS1500
+ select 64BIT_PHYS_ADDR
+ help
+ Support for the PCMCIA/CF socket interface on MyCable XXS1500
+ systems.
+
+ This driver is also available as a module called xxs1500_ss.ko
+
config PCMCIA_BCM63XX
tristate "bcm63xx pcmcia support"
depends on BCM63XX && PCMCIA
diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile
index 3c83f68c803a..381b031d9d75 100644
--- a/drivers/pcmcia/Makefile
+++ b/drivers/pcmcia/Makefile
@@ -35,18 +35,10 @@ obj-$(CONFIG_OMAP_CF) += omap_cf.o
obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o
obj-$(CONFIG_AT91_CF) += at91_cf.o
obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
+obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o
au1x00_ss-y += au1000_generic.o
au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o
-au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o
sa1111_cs-y += sa1111_generic.o
sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o
@@ -76,3 +68,5 @@ pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o
pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o
obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y)
+
+obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o
diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c
deleted file mode 100644
index c78d77fd7e3b..000000000000
--- a/drivers/pcmcia/au1000_db1x00.c
+++ /dev/null
@@ -1,305 +0,0 @@
-/*
- *
- * Alchemy Semi Db1x00 boards specific pcmcia routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * Copyright 2004 Pete Popov, updated the driver to 2.6.
- * Followed the sa11xx API and largely copied many of the hardware
- * independent functions.
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/device.h>
-#include <linux/init.h>
-
-#include <asm/irq.h>
-#include <asm/signal.h>
-#include <asm/mach-au1x00/au1000.h>
-
-#if defined(CONFIG_MIPS_DB1200)
- #include <db1200.h>
-#elif defined(CONFIG_MIPS_PB1200)
- #include <pb1200.h>
-#else
- #include <asm/mach-db1x00/db1x00.h>
- static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR;
-#endif
-
-#include "au1000_generic.h"
-
-#if 0
-#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args)
-#else
-#define debug(x,args...)
-#endif
-
-
-struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS];
-extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int);
-
-static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt)
-{
-#ifdef CONFIG_MIPS_DB1550
- skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3;
-#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT;
-#else
- skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2;
-#endif
- return 0;
-}
-
-static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt)
-{
- bcsr->pcmcia = 0; /* turn off power */
- au_sync_delay(2);
-}
-
-static void
-db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state)
-{
- u32 inserted;
- unsigned char vs;
-
- state->ready = 0;
- state->vs_Xv = 0;
- state->vs_3v = 0;
- state->detect = 0;
-
- switch (skt->nr) {
- case 0:
- vs = bcsr->status & 0x3;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- inserted = BOARD_CARD_INSERTED(0);
-#else
- inserted = !(bcsr->status & (1<<4));
-#endif
- break;
- case 1:
- vs = (bcsr->status & 0xC)>>2;
-#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200)
- inserted = BOARD_CARD_INSERTED(1);
-#else
- inserted = !(bcsr->status & (1<<5));
-#endif
- break;
- default:/* should never happen */
- return;
- }
-
- if (inserted)
- debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n",
- skt->nr, inserted, vs, bcsr->pcmcia);
-
- if (inserted) {
- switch (vs) {
- case 0:
- case 2:
- state->vs_3v=1;
- break;
- case 3: /* 5V */
- break;
- default:
- /* return without setting 'detect' */
- printk(KERN_ERR "db1x00 bad VS (%d)\n",
- vs);
- }
- state->detect = 1;
- state->ready = 1;
- }
- else {
- /* if the card was previously inserted and then ejected,
- * we should turn off power to it
- */
- if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) {
- bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST |
- BCSR_PCMCIA_PC0DRVEN |
- BCSR_PCMCIA_PC0VPP |
- BCSR_PCMCIA_PC0VCC);
- au_sync_delay(10);
- }
- else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) {
- bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST |
- BCSR_PCMCIA_PC1DRVEN |
- BCSR_PCMCIA_PC1VPP |
- BCSR_PCMCIA_PC1VCC);
- au_sync_delay(10);
- }
- }
-
- state->bvd1=1;
- state->bvd2=1;
- state->wrprot=0;
-}
-
-static int
-db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state)
-{
- u16 pwr;
- int sock = skt->nr;
-
- debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n",
- sock, state->Vcc, state->Vpp,
- state->flags & SS_RESET);
-
- /* pcmcia reg was set to zero at init time. Be careful when
- * initializing a socket not to wipe out the settings of the
- * other socket.
- */
- pwr = bcsr->pcmcia;
- pwr &= ~(0xf << sock*8); /* clear voltage settings */
-
- state->Vpp = 0;
- switch(state->Vcc){
- case 0: /* Vcc 0 */
- pwr |= SET_VCC_VPP(0,0,sock);
- break;
- case 50: /* Vcc 5V */
- switch(state->Vpp) {
- case 0:
- pwr |= SET_VCC_VPP(2,0,sock);
- break;
- case 50:
- pwr |= SET_VCC_VPP(2,1,sock);
- break;
- case 12:
- pwr |= SET_VCC_VPP(2,2,sock);
- break;
- case 33:
- default:
- pwr |= SET_VCC_VPP(0,0,sock);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- state->Vcc,
- state->Vpp);
- break;
- }
- break;
- case 33: /* Vcc 3.3V */
- switch(state->Vpp) {
- case 0:
- pwr |= SET_VCC_VPP(1,0,sock);
- break;
- case 12:
- pwr |= SET_VCC_VPP(1,2,sock);
- break;
- case 33:
- pwr |= SET_VCC_VPP(1,1,sock);
- break;
- case 50:
- default:
- pwr |= SET_VCC_VPP(0,0,sock);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- state->Vcc,
- state->Vpp);
- break;
- }
- break;
- default: /* what's this ? */
- pwr |= SET_VCC_VPP(0,0,sock);
- printk(KERN_ERR "%s: bad Vcc %d\n",
- __func__, state->Vcc);
- break;
- }
-
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
-
- if (sock == 0) {
- if (!(state->flags & SS_RESET)) {
- pwr |= BCSR_PCMCIA_PC0DRVEN;
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
- pwr |= BCSR_PCMCIA_PC0RST;
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- else {
- pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN);
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- }
- else {
- if (!(state->flags & SS_RESET)) {
- pwr |= BCSR_PCMCIA_PC1DRVEN;
- bcsr->pcmcia = pwr;
- au_sync_delay(300);
- pwr |= BCSR_PCMCIA_PC1RST;
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- else {
- pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN);
- bcsr->pcmcia = pwr;
- au_sync_delay(100);
- }
- }
- return 0;
-}
-
-/*
- * Enable card status IRQs on (re-)initialisation. This can
- * be called at initialisation, power management event, or
- * pcmcia event.
- */
-void db1x00_socket_init(struct au1000_pcmcia_socket *skt)
-{
- /* nothing to do for now */
-}
-
-/*
- * Disable card status IRQs and PCMCIA bus on suspend.
- */
-void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt)
-{
- /* nothing to do for now */
-}
-
-struct pcmcia_low_level db1x00_pcmcia_ops = {
- .owner = THIS_MODULE,
-
- .hw_init = db1x00_pcmcia_hw_init,
- .hw_shutdown = db1x00_pcmcia_shutdown,
-
- .socket_state = db1x00_pcmcia_socket_state,
- .configure_socket = db1x00_pcmcia_configure_socket,
-
- .socket_init = db1x00_socket_init,
- .socket_suspend = db1x00_socket_suspend
-};
-
-int au1x_board_init(struct device *dev)
-{
- int ret = -ENODEV;
- bcsr->pcmcia = 0; /* turn off power, if it's not already off */
- au_sync_delay(2);
- ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2);
- return ret;
-}
diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c
index 02088704ac2c..171c8a654887 100644
--- a/drivers/pcmcia/au1000_generic.c
+++ b/drivers/pcmcia/au1000_generic.c
@@ -405,18 +405,16 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops,
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK0_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK0_PHYS_MEM;
}
-#ifndef CONFIG_MIPS_XXS1500
else {
skt->virt_io = (void *)
(ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) -
(u32)mips_io_port_base);
- skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR;
- skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM;
+ skt->phys_attr = AU1X_SOCK1_PHYS_ATTR;
+ skt->phys_mem = AU1X_SOCK1_PHYS_MEM;
}
-#endif
pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io;
ret = ops->hw_init(skt);
diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h
index 13a4fbc58711..a324d329dea6 100644
--- a/drivers/pcmcia/au1000_generic.h
+++ b/drivers/pcmcia/au1000_generic.h
@@ -36,30 +36,14 @@
#define AU1X_SOCK0_IO 0xF00000000ULL
#define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL
#define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL
-/* pseudo 32 bit phys addresses, which get fixed up to the
- * real 36 bit address in fixup_bigphys_addr() */
-#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000
-#define AU1X_SOCK0_PSEUDO_PHYS_MEM 0xF8000000
/* pcmcia socket 1 needs external glue logic so the memory map
* differs from board to board.
*/
-#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \
- defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \
- defined(CONFIG_MIPS_PB1200)
+#if defined(CONFIG_MIPS_PB1000)
#define AU1X_SOCK1_IO 0xF08000000ULL
#define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL
#define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000
-#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
- defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \
- defined(CONFIG_MIPS_DB1200)
-#define AU1X_SOCK1_IO 0xF04000000ULL
-#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL
-#define AU1X_SOCK1_PHYS_MEM 0xF84000000ULL
-#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000
-#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8400000
#endif
struct pcmcia_state {
diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c
index b1984ed72d1d..5a979cb8f3e6 100644
--- a/drivers/pcmcia/au1000_pb1x00.c
+++ b/drivers/pcmcia/au1000_pb1x00.c
@@ -1,6 +1,6 @@
/*
*
- * Alchemy Semi Pb1x00 boards specific pcmcia routines.
+ * Alchemy Semi Pb1000 boards specific pcmcia routines.
*
* Copyright 2002 MontaVista Software Inc.
* Author: MontaVista Software, Inc.
@@ -46,20 +46,11 @@
#define debug(fmt, arg...) do { } while (0)
-#ifdef CONFIG_MIPS_PB1000
#include <asm/pb1000.h>
#define PCMCIA_IRQ AU1000_GPIO_15
-#elif defined (CONFIG_MIPS_PB1500)
-#include <asm/pb1500.h>
-#define PCMCIA_IRQ AU1500_GPIO_203
-#elif defined (CONFIG_MIPS_PB1100)
-#include <asm/pb1100.h>
-#define PCMCIA_IRQ AU1000_GPIO_11
-#endif
static int pb1x00_pcmcia_init(struct pcmcia_init *init)
{
-#ifdef CONFIG_MIPS_PB1000
u16 pcr;
pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
@@ -74,21 +65,10 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init)
au_sync_delay(20);
return PCMCIA_NUM_SOCKS;
-
-#else /* fixme -- take care of the Pb1500 at some point */
-
- u16 pcr;
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(500);
- return PCMCIA_NUM_SOCKS;
-#endif
}
static int pb1x00_pcmcia_shutdown(void)
{
-#ifdef CONFIG_MIPS_PB1000
u16 pcr;
pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST;
pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0);
@@ -96,14 +76,6 @@ static int pb1x00_pcmcia_shutdown(void)
au_writel(pcr, PB1000_PCR);
au_sync_delay(20);
return 0;
-#else
- u16 pcr;
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(2);
- return 0;
-#endif
}
static int
@@ -112,21 +84,11 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
u32 inserted0, inserted1;
u16 vs0, vs1;
-#ifdef CONFIG_MIPS_PB1000
vs0 = vs1 = (u16)au_readl(PB1000_ACR1);
inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2));
inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2));
vs0 = (vs0 >> 4) & 0x3;
vs1 = (vs1 >> 12) & 0x3;
-#else
- vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3;
-#ifdef CONFIG_MIPS_PB1500
- inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */
-#else /* Pb1100 */
- inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */
-#endif
- inserted1 = 0;
-#endif
state->ready = 0;
state->vs_Xv = 0;
@@ -203,7 +165,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-#ifdef CONFIG_MIPS_PB1000
pcr = au_readl(PB1000_PCR);
if (configure->sock == 0) {
@@ -323,84 +284,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure)
au_writel(pcr, PB1000_PCR);
au_sync_delay(300);
-#else
-
- pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf;
-
- debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n",
- configure->vcc, configure->vpp, pcr, configure->reset);
-
-
- switch(configure->vcc){
- case 0: /* Vcc 0 */
- pcr |= SET_VCC_VPP(0,0);
- break;
- case 50: /* Vcc 5V */
- switch(configure->vpp) {
- case 0:
- pcr |= SET_VCC_VPP(2,0);
- break;
- case 50:
- pcr |= SET_VCC_VPP(2,1);
- break;
- case 12:
- pcr |= SET_VCC_VPP(2,2);
- break;
- case 33:
- default:
- pcr |= SET_VCC_VPP(0,0);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- configure->vcc,
- configure->vpp);
- break;
- }
- break;
- case 33: /* Vcc 3.3V */
- switch(configure->vpp) {
- case 0:
- pcr |= SET_VCC_VPP(1,0);
- break;
- case 12:
- pcr |= SET_VCC_VPP(1,2);
- break;
- case 33:
- pcr |= SET_VCC_VPP(1,1);
- break;
- case 50:
- default:
- pcr |= SET_VCC_VPP(0,0);
- printk("%s: bad Vcc/Vpp (%d:%d)\n",
- __func__,
- configure->vcc,
- configure->vpp);
- break;
- }
- break;
- default: /* what's this ? */
- pcr |= SET_VCC_VPP(0,0);
- printk(KERN_ERR "%s: bad Vcc %d\n",
- __func__, configure->vcc);
- break;
- }
-
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(300);
-
- if (!configure->reset) {
- pcr |= PC_DRV_EN;
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- pcr |= PC_DEASSERT_RST;
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- }
- else {
- pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN);
- au_writew(pcr, PCMCIA_BOARD_REG);
- au_sync_delay(100);
- }
-#endif
return 0;
}
diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c
deleted file mode 100644
index b43d47b50819..000000000000
--- a/drivers/pcmcia/au1000_xxs1500.c
+++ /dev/null
@@ -1,188 +0,0 @@
-/*
- *
- * MyCable board specific pcmcia routines.
- *
- * Copyright 2003 MontaVista Software Inc.
- * Author: Pete Popov, MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
- *
- * ########################################################################
- *
- * This program is free software; you can distribute it and/or modify it
- * under the terms of the GNU General Public License (Version 2) as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/proc_fs.h>
-#include <linux/types.h>
-
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/ss.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/bus_ops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-
-#include <asm/au1000.h>
-#include <asm/au1000_pcmcia.h>
-
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-#define PCMCIA_IRQ AU1000_GPIO_4
-
-#if 0
-#define DEBUG(x, args...) printk(__func__ ": " x, ##args)
-#else
-#define DEBUG(x,args...)
-#endif
-
-static int xxs1500_pcmcia_init(struct pcmcia_init *init)
-{
- return PCMCIA_NUM_SOCKS;
-}
-
-static int xxs1500_pcmcia_shutdown(void)
-{
- /* turn off power */
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
- GPIO2_OUTPUT);
- au_sync_delay(100);
-
- /* assert reset */
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- return 0;
-}
-
-
-static int
-xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state)
-{
- u32 inserted; u32 vs;
- unsigned long gpio, gpio2;
-
- if(sock > PCMCIA_MAX_SOCK) return -1;
-
- gpio = au_readl(SYS_PINSTATERD);
- gpio2 = au_readl(GPIO2_PINSTATE);
-
- vs = gpio2 & ((1<<8) | (1<<9));
- inserted = (!(gpio & 0x1) && !(gpio & 0x2));
-
- state->ready = 0;
- state->vs_Xv = 0;
- state->vs_3v = 0;
- state->detect = 0;
-
- if (inserted) {
- switch (vs) {
- case 0:
- case 1:
- case 2:
- state->vs_3v=1;
- break;
- case 3: /* 5V */
- default:
- /* return without setting 'detect' */
- printk(KERN_ERR "au1x00_cs: unsupported VS\n",
- vs);
- return;
- }
- state->detect = 1;
- }
-
- if (state->detect) {
- state->ready = 1;
- }
-
- state->bvd1= gpio2 & (1<<10);
- state->bvd2 = gpio2 & (1<<11);
- state->wrprot=0;
- return 1;
-}
-
-
-static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info)
-{
-
- if(info->sock > PCMCIA_MAX_SOCK) return -1;
- info->irq = PCMCIA_IRQ;
- return 0;
-}
-
-
-static int
-xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure)
-{
-
- if(configure->sock > PCMCIA_MAX_SOCK) return -1;
-
- DEBUG("Vcc %dV Vpp %dV, reset %d\n",
- configure->vcc, configure->vpp, configure->reset);
-
- switch(configure->vcc){
- case 33: /* Vcc 3.3V */
- /* turn on power */
- DEBUG("turn on power\n");
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- break;
- case 50: /* Vcc 5V */
- default: /* what's this ? */
- printk(KERN_ERR "au1x00_cs: unsupported VCC\n");
- case 0: /* Vcc 0 */
- /* turn off power */
- au_sync_delay(100);
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30),
- GPIO2_OUTPUT);
- break;
- }
-
- if (!configure->reset) {
- DEBUG("deassert reset\n");
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20),
- GPIO2_OUTPUT);
- au_sync_delay(100);
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21),
- GPIO2_OUTPUT);
- }
- else {
- DEBUG("assert reset\n");
- au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20),
- GPIO2_OUTPUT);
- }
- au_sync_delay(100);
- return 0;
-}
-
-struct pcmcia_low_level xxs1500_pcmcia_ops = {
- xxs1500_pcmcia_init,
- xxs1500_pcmcia_shutdown,
- xxs1500_pcmcia_socket_state,
- xxs1500_pcmcia_get_irq_info,
- xxs1500_pcmcia_configure_socket
-};
diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c
new file mode 100644
index 000000000000..3889cf07d6ce
--- /dev/null
+++ b/drivers/pcmcia/db1xxx_ss.c
@@ -0,0 +1,623 @@
+/*
+ * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+/* This is a fairly generic PCMCIA socket driver suitable for the
+ * following Alchemy Development boards:
+ * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200.
+ *
+ * The Db1000 is used as a reference: Per-socket card-, carddetect- and
+ * statuschange IRQs connected to SoC GPIOs, control and status register
+ * bits arranged in per-socket groups in an external PLD. All boards
+ * listed here use this layout, including bit positions and meanings.
+ * Of course there are exceptions in later boards:
+ *
+ * - Pb1100/Pb1500: single socket only; voltage key bits VS are
+ * at STATUS[5:4] (instead of STATUS[1:0]).
+ * - Au1200-based: additional card-eject irqs, irqs not gpios!
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/ss.h>
+
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-db1x00/bcsr.h>
+
+#define MEM_MAP_SIZE 0x400000
+#define IO_MAP_SIZE 0x1000
+
+struct db1x_pcmcia_sock {
+ struct pcmcia_socket socket;
+ int nr; /* socket number */
+ void *virt_io;
+
+ /* the "pseudo" addresses of the PCMCIA space. */
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
+
+ /* previous flags for set_socket() */
+ unsigned int old_flags;
+
+ /* interrupt sources: linux irq numbers! */
+ int insert_irq; /* default carddetect irq */
+ int stschg_irq; /* card-status-change irq */
+ int card_irq; /* card irq */
+ int eject_irq; /* db1200/pb1200 have these */
+
+#define BOARD_TYPE_DEFAULT 0 /* most boards */
+#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */
+#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */
+ int board_type;
+};
+
+#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket)
+
+/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */
+static int db1200_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ unsigned short sigstat;
+
+ sigstat = bcsr_read(BCSR_SIGSTAT);
+ return sigstat & 1 << (8 + 2 * sock->nr);
+}
+
+/* carddetect gpio: low-active */
+static int db1000_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ return !gpio_get_value(irq_to_gpio(sock->insert_irq));
+}
+
+static int db1x_card_inserted(struct db1x_pcmcia_sock *sock)
+{
+ switch (sock->board_type) {
+ case BOARD_TYPE_DB1200:
+ return db1200_card_inserted(sock);
+ default:
+ return db1000_card_inserted(sock);
+ }
+}
+
+/* STSCHG tends to bounce heavily when cards are inserted/ejected.
+ * To avoid this, the interrupt is normally disabled and only enabled
+ * after reset to a card has been de-asserted.
+ */
+static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en)
+{
+ if (sock->stschg_irq != -1) {
+ if (en)
+ enable_irq(sock->stschg_irq);
+ else
+ disable_irq(sock->stschg_irq);
+ }
+}
+
+static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_STSCHG);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data)
+{
+ struct db1x_pcmcia_sock *sock = data;
+
+ /* Db/Pb1200 have separate per-socket insertion and ejection
+ * interrupts which stay asserted as long as the card is
+ * inserted/missing. The one which caused us to be called
+ * needs to be disabled and the other one enabled.
+ */
+ if (irq == sock->insert_irq) {
+ disable_irq_nosync(sock->insert_irq);
+ enable_irq(sock->eject_irq);
+ } else {
+ disable_irq_nosync(sock->eject_irq);
+ enable_irq(sock->insert_irq);
+ }
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock)
+{
+ int ret;
+ unsigned long flags;
+
+ if (sock->stschg_irq != -1) {
+ ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq,
+ 0, "pcmcia_stschg", sock);
+ if (ret)
+ return ret;
+ }
+
+ /* Db/Pb1200 have separate per-socket insertion and ejection
+ * interrupts, which should show edge behaviour but don't.
+ * So interrupts are disabled until both insertion and
+ * ejection handler have been registered and the currently
+ * active one disabled.
+ */
+ if (sock->board_type == BOARD_TYPE_DB1200) {
+ local_irq_save(flags);
+
+ ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq,
+ IRQF_DISABLED, "pcmcia_insert", sock);
+ if (ret)
+ goto out1;
+
+ ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq,
+ IRQF_DISABLED, "pcmcia_eject", sock);
+ if (ret) {
+ free_irq(sock->insert_irq, sock);
+ local_irq_restore(flags);
+ goto out1;
+ }
+
+ /* disable the currently active one */
+ if (db1200_card_inserted(sock))
+ disable_irq_nosync(sock->insert_irq);
+ else
+ disable_irq_nosync(sock->eject_irq);
+
+ local_irq_restore(flags);
+ } else {
+ /* all other (older) Db1x00 boards use a GPIO to show
+ * card detection status: use both-edge triggers.
+ */
+ set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq,
+ 0, "pcmcia_carddetect", sock);
+
+ if (ret)
+ goto out1;
+ }
+
+ return 0; /* all done */
+
+out1:
+ if (sock->stschg_irq != -1)
+ free_irq(sock->stschg_irq, sock);
+
+ return ret;
+}
+
+static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock)
+{
+ if (sock->stschg_irq != -1)
+ free_irq(sock->stschg_irq, sock);
+
+ free_irq(sock->insert_irq, sock);
+ if (sock->eject_irq != -1)
+ free_irq(sock->eject_irq, sock);
+}
+
+/*
+ * configure a PCMCIA socket on the Db1x00 series of boards (and
+ * compatibles).
+ *
+ * 2 external registers are involved:
+ * pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id
+ * pcmcia_control(offset 0x10):
+ * bits[0:1] set vcc for card
+ * bits[2:3] set vpp for card
+ * bit 4: enable data buffers
+ * bit 7: reset# for card
+ * add 8 for second socket.
+ */
+static int db1x_pcmcia_configure(struct pcmcia_socket *skt,
+ struct socket_state_t *state)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+ unsigned short cr_clr, cr_set;
+ unsigned int changed;
+ int v, p, ret;
+
+ /* card voltage setup */
+ cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */
+ cr_set = 0;
+ v = p = ret = 0;
+
+ switch (state->Vcc) {
+ case 50:
+ ++v;
+ case 33:
+ ++v;
+ case 0:
+ break;
+ default:
+ printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
+ sock->nr, state->Vcc);
+ }
+
+ switch (state->Vpp) {
+ case 12:
+ ++p;
+ case 33:
+ case 50:
+ ++p;
+ case 0:
+ break;
+ default:
+ printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
+ sock->nr, state->Vpp);
+ }
+
+ /* sanity check: Vpp must be 0, 12, or Vcc */
+ if (((state->Vcc == 33) && (state->Vpp == 50)) ||
+ ((state->Vcc == 50) && (state->Vpp == 33))) {
+ printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
+ sock->nr, state->Vcc, state->Vpp);
+ v = p = 0;
+ ret = -EINVAL;
+ }
+
+ /* create new voltage code */
+ cr_set |= ((v << 2) | p) << (sock->nr * 8);
+
+ changed = state->flags ^ sock->old_flags;
+
+ if (changed & SS_RESET) {
+ if (state->flags & SS_RESET) {
+ set_stschg(sock, 0);
+ /* assert reset, disable io buffers */
+ cr_clr |= (1 << (7 + (sock->nr * 8)));
+ cr_clr |= (1 << (4 + (sock->nr * 8)));
+ } else {
+ /* de-assert reset, enable io buffers */
+ cr_set |= 1 << (7 + (sock->nr * 8));
+ cr_set |= 1 << (4 + (sock->nr * 8));
+ }
+ }
+
+ /* update PCMCIA configuration */
+ bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set);
+
+ sock->old_flags = state->flags;
+
+ /* reset was taken away: give card time to initialize properly */
+ if ((changed & SS_RESET) && !(state->flags & SS_RESET)) {
+ msleep(500);
+ set_stschg(sock, 1);
+ }
+
+ return ret;
+}
+
+/* VCC bits at [3:2]/[11:10] */
+#define GET_VCC(cr, socknr) \
+ ((((cr) >> 2) >> ((socknr) * 8)) & 3)
+
+/* VS bits at [0:1]/[3:2] */
+#define GET_VS(sr, socknr) \
+ (((sr) >> (2 * (socknr))) & 3)
+
+/* reset bits at [7]/[15] */
+#define GET_RESET(cr, socknr) \
+ ((cr) & (1 << (7 + (8 * (socknr)))))
+
+static int db1x_pcmcia_get_status(struct pcmcia_socket *skt,
+ unsigned int *value)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+ unsigned short cr, sr;
+ unsigned int status;
+
+ status = db1x_card_inserted(sock) ? SS_DETECT : 0;
+
+ cr = bcsr_read(BCSR_PCMCIA);
+ sr = bcsr_read(BCSR_STATUS);
+
+ /* PB1100/PB1500: voltage key bits are at [5:4] */
+ if (sock->board_type == BOARD_TYPE_PB1100)
+ sr >>= 4;
+
+ /* determine card type */
+ switch (GET_VS(sr, sock->nr)) {
+ case 0:
+ case 2:
+ status |= SS_3VCARD; /* 3V card */
+ case 3:
+ break; /* 5V card: set nothing */
+ default:
+ status |= SS_XVCARD; /* treated as unsupported in core */
+ }
+
+ /* if Vcc is not zero, we have applied power to a card */
+ status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0;
+
+ /* reset de-asserted? then we're ready */
+ status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET;
+
+ *value = status;
+
+ return 0;
+}
+
+static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+ struct pccard_io_map *map)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+ map->start = (u32)sock->virt_io;
+ map->stop = map->start + IO_MAP_SIZE;
+
+ return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+ struct pccard_mem_map *map)
+{
+ struct db1x_pcmcia_sock *sock = to_db1x_socket(skt);
+
+ if (map->flags & MAP_ATTRIB)
+ map->static_start = sock->phys_attr + map->card_start;
+ else
+ map->static_start = sock->phys_mem + map->card_start;
+
+ return 0;
+}
+
+static struct pccard_operations db1x_pcmcia_operations = {
+ .init = db1x_pcmcia_sock_init,
+ .suspend = db1x_pcmcia_sock_suspend,
+ .get_status = db1x_pcmcia_get_status,
+ .set_socket = db1x_pcmcia_configure,
+ .set_io_map = au1x00_pcmcia_set_io_map,
+ .set_mem_map = au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev)
+{
+ struct db1x_pcmcia_sock *sock;
+ struct resource *r;
+ int ret, bid;
+
+ sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL);
+ if (!sock)
+ return -ENOMEM;
+
+ sock->nr = pdev->id;
+
+ bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI));
+ switch (bid) {
+ case BCSR_WHOAMI_PB1500:
+ case BCSR_WHOAMI_PB1500R2:
+ case BCSR_WHOAMI_PB1100:
+ sock->board_type = BOARD_TYPE_PB1100;
+ break;
+ case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR:
+ sock->board_type = BOARD_TYPE_DEFAULT;
+ break;
+ case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200:
+ sock->board_type = BOARD_TYPE_DB1200;
+ break;
+ default:
+ printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
+ ret = -ENODEV;
+ goto out0;
+ };
+
+ /*
+ * gather resources necessary and optional nice-to-haves to
+ * operate a socket:
+ * This includes IRQs for Carddetection/ejection, the card
+ * itself and optional status change detection.
+ * Also, the memory areas covered by a socket. For these
+ * we require the 32bit "pseudo" addresses (see the au1000.h
+ * header for more information).
+ */
+
+ /* card: irq assigned to the card itself. */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card");
+ sock->card_irq = r ? r->start : 0;
+
+ /* insert: irq which triggers on card insertion/ejection */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert");
+ sock->insert_irq = r ? r->start : -1;
+
+ /* stschg: irq which trigger on card status change (optional) */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg");
+ sock->stschg_irq = r ? r->start : -1;
+
+ /* eject: irq which triggers on ejection (DB1200/PB1200 only) */
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject");
+ sock->eject_irq = r ? r->start : -1;
+
+ ret = -ENODEV;
+
+ /*
+ * pseudo-attr: The 32bit address of the PCMCIA attribute space
+ * for this socket (usually the 36bit address shifted 4 to the
+ * right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_attr = r->start;
+
+ /*
+ * pseudo-mem: The 32bit address of the PCMCIA memory space for
+ * this socket (usually the 36bit address shifted 4 to the right)
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_mem = r->start;
+
+ /*
+ * pseudo-io: The 32bit address of the PCMCIA IO space for this
+ * socket (usually the 36bit address shifted 4 to the right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+ if (!r) {
+ printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
+ sock->nr);
+ goto out0;
+ }
+ sock->phys_io = r->start;
+
+ /*
+ * PCMCIA client drivers use the inb/outb macros to access
+ * the IO registers. Since mips_io_port_base is added
+ * to the access address of the mips implementation of
+ * inb/outb, we need to subtract it here because we want
+ * to access the I/O or MEM address directly, without
+ * going through this "mips_io_port_base" mechanism.
+ */
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+ mips_io_port_base);
+
+ if (!sock->virt_io) {
+ printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
+ sock->nr);
+ ret = -ENOMEM;
+ goto out0;
+ }
+
+ sock->socket.ops = &db1x_pcmcia_operations;
+ sock->socket.owner = THIS_MODULE;
+ sock->socket.pci_irq = sock->card_irq;
+ sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+ sock->socket.map_size = MEM_MAP_SIZE;
+ sock->socket.io_offset = (unsigned long)sock->virt_io;
+ sock->socket.dev.parent = &pdev->dev;
+ sock->socket.resource_ops = &pccard_static_ops;
+
+ platform_set_drvdata(pdev, sock);
+
+ ret = db1x_pcmcia_setup_irqs(sock);
+ if (ret) {
+ printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
+ sock->nr);
+ goto out1;
+ }
+
+ set_stschg(sock, 0);
+
+ ret = pcmcia_register_socket(&sock->socket);
+ if (ret) {
+ printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
+ goto out2;
+ }
+
+ printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
+ "(%p) %09llx %09llx card/insert/stschg/eject irqs @ %d "
+ "%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io,
+ sock->phys_attr, sock->phys_mem, sock->card_irq,
+ sock->insert_irq, sock->stschg_irq, sock->eject_irq);
+
+ return 0;
+
+out2:
+ db1x_pcmcia_free_irqs(sock);
+out1:
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+ kfree(sock);
+ return ret;
+}
+
+static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev)
+{
+ struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+ db1x_pcmcia_free_irqs(sock);
+ pcmcia_unregister_socket(&sock->socket);
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+ kfree(sock);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int db1x_pcmcia_suspend(struct device *dev)
+{
+ return pcmcia_socket_dev_suspend(dev);
+}
+
+static int db1x_pcmcia_resume(struct device *dev)
+{
+ return pcmcia_socket_dev_resume(dev);
+}
+
+static struct dev_pm_ops db1x_pcmcia_pmops = {
+ .resume = db1x_pcmcia_resume,
+ .suspend = db1x_pcmcia_suspend,
+ .thaw = db1x_pcmcia_resume,
+ .freeze = db1x_pcmcia_suspend,
+};
+
+#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops
+
+#else
+
+#define DB1XXX_SS_PMOPS NULL
+
+#endif
+
+static struct platform_driver db1x_pcmcia_socket_driver = {
+ .driver = {
+ .name = "db1xxx_pcmcia",
+ .owner = THIS_MODULE,
+ .pm = DB1XXX_SS_PMOPS
+ },
+ .probe = db1x_pcmcia_socket_probe,
+ .remove = __devexit_p(db1x_pcmcia_socket_remove),
+};
+
+int __init db1x_pcmcia_socket_load(void)
+{
+ return platform_driver_register(&db1x_pcmcia_socket_driver);
+}
+
+void __exit db1x_pcmcia_socket_unload(void)
+{
+ platform_driver_unregister(&db1x_pcmcia_socket_driver);
+}
+
+module_init(db1x_pcmcia_socket_load);
+module_exit(db1x_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c
new file mode 100644
index 000000000000..61560cd6e287
--- /dev/null
+++ b/drivers/pcmcia/xxs1500_ss.c
@@ -0,0 +1,350 @@
+/*
+ * PCMCIA socket code for the MyCable XXS1500 system.
+ *
+ * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/resource.h>
+#include <linux/spinlock.h>
+
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/ss.h>
+#include <pcmcia/cistpl.h>
+
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#define MEM_MAP_SIZE 0x400000
+#define IO_MAP_SIZE 0x1000
+
+
+/*
+ * 3.3V cards only; all interfacing is done via gpios:
+ *
+ * 0/1: carddetect (00 = card present, xx = huh)
+ * 4: card irq
+ * 204: reset (high-act)
+ * 205: buffer enable (low-act)
+ * 208/209: card voltage key (00,01,10,11)
+ * 210: battwarn
+ * 211: batdead
+ * 214: power (low-act)
+ */
+#define GPIO_CDA 0
+#define GPIO_CDB 1
+#define GPIO_CARDIRQ 4
+#define GPIO_RESET 204
+#define GPIO_OUTEN 205
+#define GPIO_VSL 208
+#define GPIO_VSH 209
+#define GPIO_BATTDEAD 210
+#define GPIO_BATTWARN 211
+#define GPIO_POWER 214
+
+struct xxs1500_pcmcia_sock {
+ struct pcmcia_socket socket;
+ void *virt_io;
+
+ phys_addr_t phys_io;
+ phys_addr_t phys_attr;
+ phys_addr_t phys_mem;
+
+ /* previous flags for set_socket() */
+ unsigned int old_flags;
+};
+
+#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket)
+
+static irqreturn_t cdirq(int irq, void *data)
+{
+ struct xxs1500_pcmcia_sock *sock = data;
+
+ pcmcia_parse_events(&sock->socket, SS_DETECT);
+
+ return IRQ_HANDLED;
+}
+
+static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt,
+ struct socket_state_t *state)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+ unsigned int changed;
+
+ /* power control */
+ switch (state->Vcc) {
+ case 0:
+ gpio_set_value(GPIO_POWER, 1); /* power off */
+ break;
+ case 33:
+ gpio_set_value(GPIO_POWER, 0); /* power on */
+ break;
+ case 50:
+ default:
+ return -EINVAL;
+ }
+
+ changed = state->flags ^ sock->old_flags;
+
+ if (changed & SS_RESET) {
+ if (state->flags & SS_RESET) {
+ gpio_set_value(GPIO_RESET, 1); /* assert reset */
+ gpio_set_value(GPIO_OUTEN, 1); /* buffers off */
+ } else {
+ gpio_set_value(GPIO_RESET, 0); /* deassert reset */
+ gpio_set_value(GPIO_OUTEN, 0); /* buffers on */
+ msleep(500);
+ }
+ }
+
+ sock->old_flags = state->flags;
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt,
+ unsigned int *value)
+{
+ unsigned int status;
+ int i;
+
+ status = 0;
+
+ /* check carddetects: GPIO[0:1] must both be low */
+ if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB))
+ status |= SS_DETECT;
+
+ /* determine card voltage: GPIO[208:209] binary value */
+ i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1);
+
+ switch (i) {
+ case 0:
+ case 1:
+ case 2:
+ status |= SS_3VCARD; /* 3V card */
+ break;
+ case 3: /* 5V card, unsupported */
+ default:
+ status |= SS_XVCARD; /* treated as unsupported in core */
+ }
+
+ /* GPIO214: low active power switch */
+ status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON;
+
+ /* GPIO204: high-active reset line */
+ status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY;
+
+ /* other stuff */
+ status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD;
+ status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN;
+
+ *value = status;
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt)
+{
+ gpio_direction_input(GPIO_CDA);
+ gpio_direction_input(GPIO_CDB);
+ gpio_direction_input(GPIO_VSL);
+ gpio_direction_input(GPIO_VSH);
+ gpio_direction_input(GPIO_BATTDEAD);
+ gpio_direction_input(GPIO_BATTWARN);
+ gpio_direction_output(GPIO_RESET, 1); /* assert reset */
+ gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */
+ gpio_direction_output(GPIO_POWER, 1); /* power off */
+
+ return 0;
+}
+
+static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt)
+{
+ return 0;
+}
+
+static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt,
+ struct pccard_io_map *map)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+ map->start = (u32)sock->virt_io;
+ map->stop = map->start + IO_MAP_SIZE;
+
+ return 0;
+}
+
+static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt,
+ struct pccard_mem_map *map)
+{
+ struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt);
+
+ if (map->flags & MAP_ATTRIB)
+ map->static_start = sock->phys_attr + map->card_start;
+ else
+ map->static_start = sock->phys_mem + map->card_start;
+
+ return 0;
+}
+
+static struct pccard_operations xxs1500_pcmcia_operations = {
+ .init = xxs1500_pcmcia_sock_init,
+ .suspend = xxs1500_pcmcia_sock_suspend,
+ .get_status = xxs1500_pcmcia_get_status,
+ .set_socket = xxs1500_pcmcia_configure,
+ .set_io_map = au1x00_pcmcia_set_io_map,
+ .set_mem_map = au1x00_pcmcia_set_mem_map,
+};
+
+static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev)
+{
+ struct xxs1500_pcmcia_sock *sock;
+ struct resource *r;
+ int ret, irq;
+
+ sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL);
+ if (!sock)
+ return -ENOMEM;
+
+ ret = -ENODEV;
+
+ /*
+ * pseudo-attr: The 32bit address of the PCMCIA attribute space
+ * for this socket (usually the 36bit address shifted 4 to the
+ * right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n");
+ goto out0;
+ }
+ sock->phys_attr = r->start;
+
+ /*
+ * pseudo-mem: The 32bit address of the PCMCIA memory space for
+ * this socket (usually the 36bit address shifted 4 to the right)
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n");
+ goto out0;
+ }
+ sock->phys_mem = r->start;
+
+ /*
+ * pseudo-io: The 32bit address of the PCMCIA IO space for this
+ * socket (usually the 36bit address shifted 4 to the right).
+ */
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io");
+ if (!r) {
+ dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n");
+ goto out0;
+ }
+ sock->phys_io = r->start;
+
+
+ /*
+ * PCMCIA client drivers use the inb/outb macros to access
+ * the IO registers. Since mips_io_port_base is added
+ * to the access address of the mips implementation of
+ * inb/outb, we need to subtract it here because we want
+ * to access the I/O or MEM address directly, without
+ * going through this "mips_io_port_base" mechanism.
+ */
+ sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) -
+ mips_io_port_base);
+
+ if (!sock->virt_io) {
+ dev_err(&pdev->dev, "cannot remap IO area\n");
+ ret = -ENOMEM;
+ goto out0;
+ }
+
+ sock->socket.ops = &xxs1500_pcmcia_operations;
+ sock->socket.owner = THIS_MODULE;
+ sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ);
+ sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
+ sock->socket.map_size = MEM_MAP_SIZE;
+ sock->socket.io_offset = (unsigned long)sock->virt_io;
+ sock->socket.dev.parent = &pdev->dev;
+ sock->socket.resource_ops = &pccard_static_ops;
+
+ platform_set_drvdata(pdev, sock);
+
+ /* setup carddetect irq: use one of the 2 GPIOs as an
+ * edge detector.
+ */
+ irq = gpio_to_irq(GPIO_CDA);
+ set_irq_type(irq, IRQ_TYPE_EDGE_BOTH);
+ ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot setup cd irq\n");
+ goto out1;
+ }
+
+ ret = pcmcia_register_socket(&sock->socket);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register\n");
+ goto out2;
+ }
+
+ printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
+
+ return 0;
+
+out2:
+ free_irq(gpio_to_irq(GPIO_CDA), sock);
+out1:
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+out0:
+ kfree(sock);
+ return ret;
+}
+
+static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev)
+{
+ struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev);
+
+ pcmcia_unregister_socket(&sock->socket);
+ free_irq(gpio_to_irq(GPIO_CDA), sock);
+ iounmap((void *)(sock->virt_io + (u32)mips_io_port_base));
+ kfree(sock);
+
+ return 0;
+}
+
+static struct platform_driver xxs1500_pcmcia_socket_driver = {
+ .driver = {
+ .name = "xxs1500_pcmcia",
+ .owner = THIS_MODULE,
+ },
+ .probe = xxs1500_pcmcia_probe,
+ .remove = __devexit_p(xxs1500_pcmcia_remove),
+};
+
+int __init xxs1500_pcmcia_socket_load(void)
+{
+ return platform_driver_register(&xxs1500_pcmcia_socket_driver);
+}
+
+void __exit xxs1500_pcmcia_socket_unload(void)
+{
+ platform_driver_unregister(&xxs1500_pcmcia_socket_driver);
+}
+
+module_init(xxs1500_pcmcia_socket_load);
+module_exit(xxs1500_pcmcia_socket_unload);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems");
+MODULE_AUTHOR("Manuel Lauss");
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e9b15c3746fa..a81ff7bc5fa1 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags)
}
#endif
-#ifdef CONFIG_SERIAL_8250_AU1X00
- /* if access method is AU, it is a 16550 with a quirk */
- if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
- up->bugs |= UART_BUG_NOMSR;
-#endif
-
serial_outp(up, UART_LCR, save_lcr);
if (up->capabilities != uart_config[up->port.type].flags) {
@@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state,
static unsigned int serial8250_port_size(struct uart_8250_port *pt)
{
if (pt->port.iotype == UPIO_AU)
- return 0x100000;
+ return 0x1000;
#ifdef CONFIG_ARCH_OMAP
if (is_omap_port(pt))
return 0x16 << pt->port.regshift;
@@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags)
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
+
+#ifdef CONFIG_SERIAL_8250_AU1X00
+ /* if access method is AU, it is a 16550 with a quirk */
+ if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU)
+ up->bugs |= UART_BUG_NOMSR;
+#endif
+
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
autoconfig_irq(up);
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index cfd5ff9508fa..ba8ac4f599d3 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -412,11 +412,13 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t)
}
/* put buffers on the ring */
- res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len);
+ res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx),
+ t->len, DDMA_FLAGS_IE);
if (!res)
dev_err(hw->dev, "rx dma put dest error\n");
- res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len);
+ res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx),
+ t->len, DDMA_FLAGS_IE);
if (!res)
dev_err(hw->dev, "tx dma put source error\n");
diff --git a/drivers/staging/octeon/Makefile b/drivers/staging/octeon/Makefile
index c0a583cc2227..87447c102fa0 100644
--- a/drivers/staging/octeon/Makefile
+++ b/drivers/staging/octeon/Makefile
@@ -14,7 +14,6 @@ obj-${CONFIG_OCTEON_ETHERNET} := octeon-ethernet.o
octeon-ethernet-objs := ethernet.o
octeon-ethernet-objs += ethernet-mdio.o
octeon-ethernet-objs += ethernet-mem.o
-octeon-ethernet-objs += ethernet-proc.o
octeon-ethernet-objs += ethernet-rgmii.o
octeon-ethernet-objs += ethernet-rx.o
octeon-ethernet-objs += ethernet-sgmii.o
diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h
index f13131b03c33..6a2cd50a17df 100644
--- a/drivers/staging/octeon/ethernet-defines.h
+++ b/drivers/staging/octeon/ethernet-defines.h
@@ -41,17 +41,10 @@
* Tells the driver to populate the packet buffers with kernel skbuffs.
* This allows the driver to receive packets without copying them. It also
* means that 32bit userspace can't access the packet buffers.
- * USE_32BIT_SHARED
- * This define tells the driver to allocate memory for buffers from the
- * 32bit sahred region instead of the kernel memory space.
* USE_HW_TCPUDP_CHECKSUM
* Controls if the Octeon TCP/UDP checksum engine is used for packet
* output. If this is zero, the kernel will perform the checksum in
* software.
- * USE_MULTICORE_RECEIVE
- * Process receive interrupts on multiple cores. This spreads the network
- * load across the first 8 processors. If ths is zero, only one core
- * processes incomming packets.
* USE_ASYNC_IOBDMA
* Use asynchronous IO access to hardware. This uses Octeon's asynchronous
* IOBDMAs to issue IO accesses without stalling. Set this to zero
@@ -75,29 +68,15 @@
#define CONFIG_CAVIUM_RESERVE32 0
#endif
-#if CONFIG_CAVIUM_RESERVE32
-#define USE_32BIT_SHARED 1
-#define USE_SKBUFFS_IN_HW 0
-#define REUSE_SKBUFFS_WITHOUT_FREE 0
-#else
-#define USE_32BIT_SHARED 0
#define USE_SKBUFFS_IN_HW 1
#ifdef CONFIG_NETFILTER
#define REUSE_SKBUFFS_WITHOUT_FREE 0
#else
#define REUSE_SKBUFFS_WITHOUT_FREE 1
#endif
-#endif
-
-/* Max interrupts per second per core */
-#define INTERRUPT_LIMIT 10000
-/* Don't limit the number of interrupts */
-/*#define INTERRUPT_LIMIT 0 */
#define USE_HW_TCPUDP_CHECKSUM 1
-#define USE_MULTICORE_RECEIVE 1
-
/* Enable Random Early Dropping under load */
#define USE_RED 1
#define USE_ASYNC_IOBDMA (CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0)
@@ -115,21 +94,12 @@
/* Use this to not have FPA frees control L2 */
/*#define DONT_WRITEBACK(x) 0 */
-/* Maximum number of packets to process per interrupt. */
-#define MAX_RX_PACKETS 120
/* Maximum number of SKBs to try to free per xmit packet. */
-#define MAX_SKB_TO_FREE 10
#define MAX_OUT_QUEUE_DEPTH 1000
-#ifndef CONFIG_SMP
-#undef USE_MULTICORE_RECEIVE
-#define USE_MULTICORE_RECEIVE 0
-#endif
-
-#define IP_PROTOCOL_TCP 6
-#define IP_PROTOCOL_UDP 0x11
+#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(uint32_t))
+#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(uint32_t))
-#define FAU_NUM_PACKET_BUFFERS_TO_FREE (CVMX_FAU_REG_END - sizeof(uint32_t))
#define TOTAL_NUMBER_OF_PORTS (CVMX_PIP_NUM_INPUT_PORTS+1)
diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c
index 05a5cc0f43ed..7e0be8d00dc3 100644
--- a/drivers/staging/octeon/ethernet-mdio.c
+++ b/drivers/staging/octeon/ethernet-mdio.c
@@ -96,11 +96,11 @@ const struct ethtool_ops cvm_oct_ethtool_ops = {
};
/**
- * IOCTL support for PHY control
- *
+ * cvm_oct_ioctl - IOCTL support for PHY control
* @dev: Device to change
* @rq: the request
* @cmd: the command
+ *
* Returns Zero on success
*/
int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
@@ -153,7 +153,7 @@ static void cvm_oct_adjust_link(struct net_device *dev)
/**
- * Setup the PHY
+ * cvm_oct_phy_setup_device - setup the PHY
*
* @dev: Device to setup
*
diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h
index 55d0614a7cd9..a417d4fce12c 100644
--- a/drivers/staging/octeon/ethernet-mdio.h
+++ b/drivers/staging/octeon/ethernet-mdio.h
@@ -32,7 +32,6 @@
#include <linux/ip.h>
#include <linux/string.h>
#include <linux/ethtool.h>
-#include <linux/mii.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <net/dst.h>
diff --git a/drivers/staging/octeon/ethernet-mem.c b/drivers/staging/octeon/ethernet-mem.c
index b595903e2af1..00cc91df6b46 100644
--- a/drivers/staging/octeon/ethernet-mem.c
+++ b/drivers/staging/octeon/ethernet-mem.c
@@ -4,7 +4,7 @@
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
@@ -26,8 +26,6 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
-#include <net/dst.h>
#include <asm/octeon/octeon.h>
@@ -36,18 +34,19 @@
#include "cvmx-fpa.h"
/**
- * Fill the supplied hardware pool with skbuffs
- *
+ * cvm_oct_fill_hw_skbuff - fill the supplied hardware pool with skbuffs
* @pool: Pool to allocate an skbuff for
* @size: Size of the buffer needed for the pool
* @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
*/
static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
{
int freed = elements;
while (freed) {
- struct sk_buff *skb = dev_alloc_skb(size + 128);
+ struct sk_buff *skb = dev_alloc_skb(size + 256);
if (unlikely(skb == NULL)) {
pr_warning
("Failed to allocate skb for hardware pool %d\n",
@@ -55,7 +54,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
break;
}
- skb_reserve(skb, 128 - (((unsigned long)skb->data) & 0x7f));
+ skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f));
*(struct sk_buff **)(skb->data - sizeof(void *)) = skb;
cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128));
freed--;
@@ -64,8 +63,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements)
}
/**
- * Free the supplied hardware pool of skbuffs
- *
+ * cvm_oct_free_hw_skbuff- free hardware pool skbuffs
* @pool: Pool to allocate an skbuff for
* @size: Size of the buffer needed for the pool
* @elements: Number of buffers to allocate
@@ -93,96 +91,76 @@ static void cvm_oct_free_hw_skbuff(int pool, int size, int elements)
}
/**
- * This function fills a hardware pool with memory. Depending
- * on the config defines, this memory might come from the
- * kernel or global 32bit memory allocated with
- * cvmx_bootmem_alloc.
- *
+ * cvm_oct_fill_hw_memory - fill a hardware pool with memory.
* @pool: Pool to populate
* @size: Size of each buffer in the pool
* @elements: Number of buffers to allocate
+ *
+ * Returns the actual number of buffers allocated.
*/
static int cvm_oct_fill_hw_memory(int pool, int size, int elements)
{
char *memory;
+ char *fpa;
int freed = elements;
- if (USE_32BIT_SHARED) {
- extern uint64_t octeon_reserve32_memory;
-
- memory =
- cvmx_bootmem_alloc_range(elements * size, 128,
- octeon_reserve32_memory,
- octeon_reserve32_memory +
- (CONFIG_CAVIUM_RESERVE32 << 20) -
- 1);
- if (memory == NULL)
- panic("Unable to allocate %u bytes for FPA pool %d\n",
- elements * size, pool);
-
- pr_notice("Memory range %p - %p reserved for "
- "hardware\n", memory,
- memory + elements * size - 1);
-
- while (freed) {
- cvmx_fpa_free(memory, pool, 0);
- memory += size;
- freed--;
- }
- } else {
- while (freed) {
- /* We need to force alignment to 128 bytes here */
- memory = kmalloc(size + 127, GFP_ATOMIC);
- if (unlikely(memory == NULL)) {
- pr_warning("Unable to allocate %u bytes for "
- "FPA pool %d\n",
- elements * size, pool);
- break;
- }
- memory = (char *)(((unsigned long)memory + 127) & -128);
- cvmx_fpa_free(memory, pool, 0);
- freed--;
+ while (freed) {
+ /*
+ * FPA memory must be 128 byte aligned. Since we are
+ * aligning we need to save the original pointer so we
+ * can feed it to kfree when the memory is returned to
+ * the kernel.
+ *
+ * We allocate an extra 256 bytes to allow for
+ * alignment and space for the original pointer saved
+ * just before the block.
+ */
+ memory = kmalloc(size + 256, GFP_ATOMIC);
+ if (unlikely(memory == NULL)) {
+ pr_warning("Unable to allocate %u bytes for FPA pool %d\n",
+ elements * size, pool);
+ break;
}
+ fpa = (char *)(((unsigned long)memory + 256) & ~0x7fUL);
+ *((char **)fpa - 1) = memory;
+ cvmx_fpa_free(fpa, pool, 0);
+ freed--;
}
return elements - freed;
}
/**
- * Free memory previously allocated with cvm_oct_fill_hw_memory
- *
+ * cvm_oct_free_hw_memory - Free memory allocated by cvm_oct_fill_hw_memory
* @pool: FPA pool to free
* @size: Size of each buffer in the pool
* @elements: Number of buffers that should be in the pool
*/
static void cvm_oct_free_hw_memory(int pool, int size, int elements)
{
- if (USE_32BIT_SHARED) {
- pr_warning("Warning: 32 shared memory is not freeable\n");
- } else {
- char *memory;
- do {
- memory = cvmx_fpa_alloc(pool);
- if (memory) {
- elements--;
- kfree(phys_to_virt(cvmx_ptr_to_phys(memory)));
- }
- } while (memory);
+ char *memory;
+ char *fpa;
+ do {
+ fpa = cvmx_fpa_alloc(pool);
+ if (fpa) {
+ elements--;
+ fpa = (char *)phys_to_virt(cvmx_ptr_to_phys(fpa));
+ memory = *((char **)fpa - 1);
+ kfree(memory);
+ }
+ } while (fpa);
- if (elements < 0)
- pr_warning("Freeing of pool %u had too many "
- "buffers (%d)\n",
- pool, elements);
- else if (elements > 0)
- pr_warning("Warning: Freeing of pool %u is "
- "missing %d buffers\n",
- pool, elements);
- }
+ if (elements < 0)
+ pr_warning("Freeing of pool %u had too many buffers (%d)\n",
+ pool, elements);
+ else if (elements > 0)
+ pr_warning("Warning: Freeing of pool %u is missing %d buffers\n",
+ pool, elements);
}
int cvm_oct_mem_fill_fpa(int pool, int size, int elements)
{
int freed;
- if (USE_SKBUFFS_IN_HW)
+ if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
freed = cvm_oct_fill_hw_skbuff(pool, size, elements);
else
freed = cvm_oct_fill_hw_memory(pool, size, elements);
@@ -191,7 +169,7 @@ int cvm_oct_mem_fill_fpa(int pool, int size, int elements)
void cvm_oct_mem_empty_fpa(int pool, int size, int elements)
{
- if (USE_SKBUFFS_IN_HW)
+ if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL)
cvm_oct_free_hw_skbuff(pool, size, elements);
else
cvm_oct_free_hw_memory(pool, size, elements);
diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c
deleted file mode 100644
index 16308d484d3b..000000000000
--- a/drivers/staging/octeon/ethernet-proc.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/**********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-**********************************************************************/
-#include <linux/kernel.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <net/dst.h>
-
-#include <asm/octeon/octeon.h>
-
-#include "octeon-ethernet.h"
-#include "ethernet-defines.h"
-
-#include "cvmx-helper.h"
-#include "cvmx-pip.h"
-
-/**
- * User is reading /proc/octeon_ethernet_stats
- *
- * @m:
- * @v:
- * Returns
- */
-static int cvm_oct_stats_show(struct seq_file *m, void *v)
-{
- struct octeon_ethernet *priv;
- int port;
-
- for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
-
- if (cvm_oct_device[port]) {
- priv = netdev_priv(cvm_oct_device[port]);
-
- seq_printf(m, "\nOcteon Port %d (%s)\n", port,
- cvm_oct_device[port]->name);
- seq_printf(m,
- "rx_packets: %12lu\t"
- "tx_packets: %12lu\n",
- priv->stats.rx_packets,
- priv->stats.tx_packets);
- seq_printf(m,
- "rx_bytes: %12lu\t"
- "tx_bytes: %12lu\n",
- priv->stats.rx_bytes, priv->stats.tx_bytes);
- seq_printf(m,
- "rx_errors: %12lu\t"
- "tx_errors: %12lu\n",
- priv->stats.rx_errors,
- priv->stats.tx_errors);
- seq_printf(m,
- "rx_dropped: %12lu\t"
- "tx_dropped: %12lu\n",
- priv->stats.rx_dropped,
- priv->stats.tx_dropped);
- seq_printf(m,
- "rx_length_errors: %12lu\t"
- "tx_aborted_errors: %12lu\n",
- priv->stats.rx_length_errors,
- priv->stats.tx_aborted_errors);
- seq_printf(m,
- "rx_over_errors: %12lu\t"
- "tx_carrier_errors: %12lu\n",
- priv->stats.rx_over_errors,
- priv->stats.tx_carrier_errors);
- seq_printf(m,
- "rx_crc_errors: %12lu\t"
- "tx_fifo_errors: %12lu\n",
- priv->stats.rx_crc_errors,
- priv->stats.tx_fifo_errors);
- seq_printf(m,
- "rx_frame_errors: %12lu\t"
- "tx_heartbeat_errors: %12lu\n",
- priv->stats.rx_frame_errors,
- priv->stats.tx_heartbeat_errors);
- seq_printf(m,
- "rx_fifo_errors: %12lu\t"
- "tx_window_errors: %12lu\n",
- priv->stats.rx_fifo_errors,
- priv->stats.tx_window_errors);
- seq_printf(m,
- "rx_missed_errors: %12lu\t"
- "multicast: %12lu\n",
- priv->stats.rx_missed_errors,
- priv->stats.multicast);
- }
- }
-
- return 0;
-}
-
-/**
- * /proc/octeon_ethernet_stats was openned. Use the single_open iterator
- *
- * @inode:
- * @file:
- * Returns
- */
-static int cvm_oct_stats_open(struct inode *inode, struct file *file)
-{
- return single_open(file, cvm_oct_stats_show, NULL);
-}
-
-static const struct file_operations cvm_oct_stats_operations = {
- .open = cvm_oct_stats_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-void cvm_oct_proc_initialize(void)
-{
- struct proc_dir_entry *entry =
- create_proc_entry("octeon_ethernet_stats", 0, NULL);
- if (entry)
- entry->proc_fops = &cvm_oct_stats_operations;
-}
-
-void cvm_oct_proc_shutdown(void)
-{
- remove_proc_entry("octeon_ethernet_stats", NULL);
-}
diff --git a/drivers/staging/octeon/ethernet-proc.h b/drivers/staging/octeon/ethernet-proc.h
deleted file mode 100644
index 82c7d9f78bc4..000000000000
--- a/drivers/staging/octeon/ethernet-proc.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*********************************************************************
- * Author: Cavium Networks
- *
- * Contact: support@caviumnetworks.com
- * This file is part of the OCTEON SDK
- *
- * Copyright (c) 2003-2007 Cavium Networks
- *
- * This file is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, Version 2, as
- * published by the Free Software Foundation.
- *
- * This file is distributed in the hope that it will be useful, but
- * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
- * NONINFRINGEMENT. See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this file; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- * or visit http://www.gnu.org/licenses/.
- *
- * This file may also be available under a different license from Cavium.
- * Contact Cavium Networks for more information
-*********************************************************************/
-
-void cvm_oct_proc_initialize(void);
-void cvm_oct_proc_shutdown(void);
diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c
index 3820f1ec11d1..a0d4d4b98bdc 100644
--- a/drivers/staging/octeon/ethernet-rgmii.c
+++ b/drivers/staging/octeon/ethernet-rgmii.c
@@ -26,7 +26,7 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
+#include <linux/phy.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
@@ -48,14 +48,20 @@ static int number_rgmii_ports;
static void cvm_oct_rgmii_poll(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
- unsigned long flags;
+ unsigned long flags = 0;
cvmx_helper_link_info_t link_info;
+ int use_global_register_lock = (priv->phydev == NULL);
- /*
- * Take the global register lock since we are going to touch
- * registers that affect more than one port.
- */
- spin_lock_irqsave(&global_register_lock, flags);
+ BUG_ON(in_interrupt());
+ if (use_global_register_lock) {
+ /*
+ * Take the global register lock since we are going to
+ * touch registers that affect more than one port.
+ */
+ spin_lock_irqsave(&global_register_lock, flags);
+ } else {
+ mutex_lock(&priv->phydev->bus->mdio_lock);
+ }
link_info = cvmx_helper_link_get(priv->port);
if (link_info.u64 == priv->link_info) {
@@ -115,7 +121,11 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
dev->name);
}
}
- spin_unlock_irqrestore(&global_register_lock, flags);
+
+ if (use_global_register_lock)
+ spin_unlock_irqrestore(&global_register_lock, flags);
+ else
+ mutex_unlock(&priv->phydev->bus->mdio_lock);
return;
}
@@ -151,7 +161,12 @@ static void cvm_oct_rgmii_poll(struct net_device *dev)
link_info = cvmx_helper_link_autoconf(priv->port);
priv->link_info = link_info.u64;
}
- spin_unlock_irqrestore(&global_register_lock, flags);
+
+ if (use_global_register_lock)
+ spin_unlock_irqrestore(&global_register_lock, flags);
+ else {
+ mutex_unlock(&priv->phydev->bus->mdio_lock);
+ }
if (priv->phydev == NULL) {
/* Tell core. */
@@ -213,8 +228,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id)
struct net_device *dev =
cvm_oct_device[cvmx_helper_get_ipd_port
(interface, index)];
- if (dev)
- cvm_oct_rgmii_poll(dev);
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_work(cvm_oct_poll_queue, &priv->port_work);
+
gmx_rx_int_reg.u64 = 0;
gmx_rx_int_reg.s.phy_dupx = 1;
gmx_rx_int_reg.s.phy_link = 1;
@@ -252,8 +270,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id)
struct net_device *dev =
cvm_oct_device[cvmx_helper_get_ipd_port
(interface, index)];
- if (dev)
- cvm_oct_rgmii_poll(dev);
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ if (dev && !atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_work(cvm_oct_poll_queue, &priv->port_work);
+
gmx_rx_int_reg.u64 = 0;
gmx_rx_int_reg.s.phy_dupx = 1;
gmx_rx_int_reg.s.phy_link = 1;
@@ -302,6 +323,12 @@ int cvm_oct_rgmii_stop(struct net_device *dev)
return 0;
}
+static void cvm_oct_rgmii_immediate_poll(struct work_struct *work)
+{
+ struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work);
+ cvm_oct_rgmii_poll(cvm_oct_device[priv->port]);
+}
+
int cvm_oct_rgmii_init(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
@@ -309,7 +336,7 @@ int cvm_oct_rgmii_init(struct net_device *dev)
cvm_oct_common_init(dev);
dev->netdev_ops->ndo_stop(dev);
-
+ INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll);
/*
* Due to GMX errata in CN3XXX series chips, it is necessary
* to take the link down immediately when the PHY changes
@@ -397,4 +424,5 @@ void cvm_oct_rgmii_uninit(struct net_device *dev)
number_rgmii_ports--;
if (number_rgmii_ports == 0)
free_irq(OCTEON_IRQ_RML, &number_rgmii_ports);
+ cancel_work_sync(&priv->port_work);
}
diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c
index 1b237b7e689d..cb38f9eb2cc0 100644
--- a/drivers/staging/octeon/ethernet-rx.c
+++ b/drivers/staging/octeon/ethernet-rx.c
@@ -4,7 +4,7 @@
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
@@ -27,16 +27,14 @@
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/cache.h>
+#include <linux/cpumask.h>
#include <linux/netdevice.h>
#include <linux/init.h>
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/string.h>
#include <linux/prefetch.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
+#include <linux/smp.h>
#include <net/dst.h>
#ifdef CONFIG_XFRM
#include <linux/xfrm.h>
@@ -48,8 +46,9 @@
#include <asm/octeon/octeon.h>
#include "ethernet-defines.h"
-#include "octeon-ethernet.h"
#include "ethernet-mem.h"
+#include "ethernet-rx.h"
+#include "octeon-ethernet.h"
#include "ethernet-util.h"
#include "cvmx-helper.h"
@@ -61,62 +60,88 @@
#include "cvmx-gmxx-defs.h"
-struct cvm_tasklet_wrapper {
- struct tasklet_struct t;
-};
+struct cvm_napi_wrapper {
+ struct napi_struct napi;
+} ____cacheline_aligned_in_smp;
-/*
- * Aligning the tasklet_struct on cachline boundries seems to decrease
- * throughput even though in theory it would reduce contantion on the
- * cache lines containing the locks.
- */
+static struct cvm_napi_wrapper cvm_oct_napi[NR_CPUS] __cacheline_aligned_in_smp;
-static struct cvm_tasklet_wrapper cvm_oct_tasklet[NR_CPUS];
+struct cvm_oct_core_state {
+ int baseline_cores;
+ /*
+ * The number of additional cores that could be processing
+ * input packtes.
+ */
+ atomic_t available_cores;
+ cpumask_t cpu_state;
+} ____cacheline_aligned_in_smp;
-/**
- * Interrupt handler. The interrupt occurs whenever the POW
- * transitions from 0->1 packets in our group.
- *
- * @cpl:
- * @dev_id:
- * @regs:
- * Returns
- */
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
+static struct cvm_oct_core_state core_state __cacheline_aligned_in_smp;
+
+static void cvm_oct_enable_napi(void *_)
{
- /* Acknowledge the interrupt */
- if (INTERRUPT_LIMIT)
- cvmx_write_csr(CVMX_POW_WQ_INT, 1 << pow_receive_group);
- else
- cvmx_write_csr(CVMX_POW_WQ_INT, 0x10001 << pow_receive_group);
- preempt_disable();
- tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
- preempt_enable();
- return IRQ_HANDLED;
+ int cpu = smp_processor_id();
+ napi_schedule(&cvm_oct_napi[cpu].napi);
+}
+
+static void cvm_oct_enable_one_cpu(void)
+{
+ int v;
+ int cpu;
+
+ /* Check to see if more CPUs are available for receive processing... */
+ v = atomic_sub_if_positive(1, &core_state.available_cores);
+ if (v < 0)
+ return;
+
+ /* ... if a CPU is available, Turn on NAPI polling for that CPU. */
+ for_each_online_cpu(cpu) {
+ if (!cpu_test_and_set(cpu, core_state.cpu_state)) {
+ v = smp_call_function_single(cpu, cvm_oct_enable_napi,
+ NULL, 0);
+ if (v)
+ panic("Can't enable NAPI.");
+ break;
+ }
+ }
+}
+
+static void cvm_oct_no_more_work(void)
+{
+ int cpu = smp_processor_id();
+
+ /*
+ * CPU zero is special. It always has the irq enabled when
+ * waiting for incoming packets.
+ */
+ if (cpu == 0) {
+ enable_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+ return;
+ }
+
+ cpu_clear(cpu, core_state.cpu_state);
+ atomic_add(1, &core_state.available_cores);
}
-#ifdef CONFIG_NET_POLL_CONTROLLER
/**
- * This is called when the kernel needs to manually poll the
- * device. For Octeon, this is simply calling the interrupt
- * handler. We actually poll all the devices, not just the
- * one supplied.
+ * cvm_oct_do_interrupt - interrupt handler.
+ *
+ * The interrupt occurs whenever the POW has packets in our group.
*
- * @dev: Device to poll. Unused
*/
-void cvm_oct_poll_controller(struct net_device *dev)
+static irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id)
{
- preempt_disable();
- tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t);
- preempt_enable();
+ /* Disable the IRQ and start napi_poll. */
+ disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+ cvm_oct_enable_napi(NULL);
+
+ return IRQ_HANDLED;
}
-#endif
/**
- * This is called on receive errors, and determines if the packet
- * can be dropped early-on in cvm_oct_tasklet_rx().
- *
+ * cvm_oct_check_rcv_error - process receive errors
* @work: Work queue entry pointing to the packet.
+ *
* Returns Non-zero if the packet can be dropped, zero otherwise.
*/
static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
@@ -199,19 +224,20 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work)
}
/**
- * Tasklet function that is scheduled on a core when an interrupt occurs.
+ * cvm_oct_napi_poll - the NAPI poll function.
+ * @napi: The NAPI instance, or null if called from cvm_oct_poll_controller
+ * @budget: Maximum number of packets to receive.
*
- * @unused:
+ * Returns the number of packets processed.
*/
-void cvm_oct_tasklet_rx(unsigned long unused)
+static int cvm_oct_napi_poll(struct napi_struct *napi, int budget)
{
- const int coreid = cvmx_get_core_num();
- uint64_t old_group_mask;
- uint64_t old_scratch;
- int rx_count = 0;
- int number_to_free;
- int num_freed;
- int packet_not_copied;
+ const int coreid = cvmx_get_core_num();
+ uint64_t old_group_mask;
+ uint64_t old_scratch;
+ int rx_count = 0;
+ int did_work_request = 0;
+ int packet_not_copied;
/* Prefetch cvm_oct_device since we know we need it soon */
prefetch(cvm_oct_device);
@@ -227,59 +253,63 @@ void cvm_oct_tasklet_rx(unsigned long unused)
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid),
(old_group_mask & ~0xFFFFull) | 1 << pow_receive_group);
- if (USE_ASYNC_IOBDMA)
+ if (USE_ASYNC_IOBDMA) {
cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+ did_work_request = 1;
+ }
- while (1) {
+ while (rx_count < budget) {
struct sk_buff *skb = NULL;
+ struct sk_buff **pskb = NULL;
int skb_in_hw;
cvmx_wqe_t *work;
- if (USE_ASYNC_IOBDMA) {
+ if (USE_ASYNC_IOBDMA && did_work_request)
work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH);
- } else {
- if ((INTERRUPT_LIMIT == 0)
- || likely(rx_count < MAX_RX_PACKETS))
- work =
- cvmx_pow_work_request_sync
- (CVMX_POW_NO_WAIT);
- else
- work = NULL;
- }
+ else
+ work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT);
+
prefetch(work);
- if (work == NULL)
+ did_work_request = 0;
+ if (work == NULL) {
+ union cvmx_pow_wq_int wq_int;
+ wq_int.u64 = 0;
+ wq_int.s.iq_dis = 1 << pow_receive_group;
+ wq_int.s.wq_int = 1 << pow_receive_group;
+ cvmx_write_csr(CVMX_POW_WQ_INT, wq_int.u64);
break;
+ }
+ pskb = (struct sk_buff **)(cvm_oct_get_buffer_ptr(work->packet_ptr) - sizeof(void *));
+ prefetch(pskb);
- /*
- * Limit each core to processing MAX_RX_PACKETS
- * packets without a break. This way the RX can't
- * starve the TX task.
- */
- if (USE_ASYNC_IOBDMA) {
-
- if ((INTERRUPT_LIMIT == 0)
- || likely(rx_count < MAX_RX_PACKETS))
- cvmx_pow_work_request_async_nocheck
- (CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
- else {
- cvmx_scratch_write64(CVMX_SCR_SCRATCH,
- 0x8000000000000000ull);
- cvmx_pow_tag_sw_null_nocheck();
- }
+ if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) {
+ cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT);
+ did_work_request = 1;
+ }
+
+ if (rx_count == 0) {
+ /*
+ * First time through, see if there is enough
+ * work waiting to merit waking another
+ * CPU.
+ */
+ union cvmx_pow_wq_int_cntx counts;
+ int backlog;
+ int cores_in_use = core_state.baseline_cores - atomic_read(&core_state.available_cores);
+ counts.u64 = cvmx_read_csr(CVMX_POW_WQ_INT_CNTX(pow_receive_group));
+ backlog = counts.s.iq_cnt + counts.s.ds_cnt;
+ if (backlog > budget * cores_in_use && napi != NULL)
+ cvm_oct_enable_one_cpu();
}
skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1;
if (likely(skb_in_hw)) {
- skb =
- *(struct sk_buff
- **)(cvm_oct_get_buffer_ptr(work->packet_ptr) -
- sizeof(void *));
+ skb = *pskb;
prefetch(&skb->head);
prefetch(&skb->len);
}
prefetch(cvm_oct_device[work->ipprt]);
- rx_count++;
/* Immediately throw away all packets with receive errors */
if (unlikely(work->word2.snoip.rcv_error)) {
if (cvm_oct_check_rcv_error(work))
@@ -292,39 +322,27 @@ void cvm_oct_tasklet_rx(unsigned long unused)
* buffer.
*/
if (likely(skb_in_hw)) {
- /*
- * This calculation was changed in case the
- * skb header is using a different address
- * aliasing type than the buffer. It doesn't
- * make any differnece now, but the new one is
- * more correct.
- */
- skb->data =
- skb->head + work->packet_ptr.s.addr -
- cvmx_ptr_to_phys(skb->head);
+ skb->data = skb->head + work->packet_ptr.s.addr - cvmx_ptr_to_phys(skb->head);
prefetch(skb->data);
skb->len = work->len;
skb_set_tail_pointer(skb, skb->len);
packet_not_copied = 1;
} else {
-
/*
* We have to copy the packet. First allocate
* an skbuff for it.
*/
skb = dev_alloc_skb(work->len);
if (!skb) {
- DEBUGPRINT("Port %d failed to allocate "
- "skbuff, packet dropped\n",
- work->ipprt);
+ DEBUGPRINT("Port %d failed to allocate skbuff, packet dropped\n",
+ work->ipprt);
cvm_oct_free_work(work);
continue;
}
/*
* Check if we've received a packet that was
- * entirely stored in the work entry. This is
- * untested.
+ * entirely stored in the work entry.
*/
if (unlikely(work->word2.s.bufs == 0)) {
uint8_t *ptr = work->packet_data;
@@ -343,15 +361,13 @@ void cvm_oct_tasklet_rx(unsigned long unused)
/* No packet buffers to free */
} else {
int segments = work->word2.s.bufs;
- union cvmx_buf_ptr segment_ptr =
- work->packet_ptr;
+ union cvmx_buf_ptr segment_ptr = work->packet_ptr;
int len = work->len;
while (segments--) {
union cvmx_buf_ptr next_ptr =
- *(union cvmx_buf_ptr *)
- cvmx_phys_to_ptr(segment_ptr.s.
- addr - 8);
+ *(union cvmx_buf_ptr *)cvmx_phys_to_ptr(segment_ptr.s.addr - 8);
+
/*
* Octeon Errata PKI-100: The segment size is
* wrong. Until it is fixed, calculate the
@@ -361,22 +377,18 @@ void cvm_oct_tasklet_rx(unsigned long unused)
* one: int segment_size =
* segment_ptr.s.size;
*/
- int segment_size =
- CVMX_FPA_PACKET_POOL_SIZE -
- (segment_ptr.s.addr -
- (((segment_ptr.s.addr >> 7) -
- segment_ptr.s.back) << 7));
- /* Don't copy more than what is left
- in the packet */
+ int segment_size = CVMX_FPA_PACKET_POOL_SIZE -
+ (segment_ptr.s.addr - (((segment_ptr.s.addr >> 7) - segment_ptr.s.back) << 7));
+ /*
+ * Don't copy more than what
+ * is left in the packet.
+ */
if (segment_size > len)
segment_size = len;
/* Copy the data into the packet */
memcpy(skb_put(skb, segment_size),
- cvmx_phys_to_ptr(segment_ptr.s.
- addr),
+ cvmx_phys_to_ptr(segment_ptr.s.addr),
segment_size);
- /* Reduce the amount of bytes left
- to copy */
len -= segment_size;
segment_ptr = next_ptr;
}
@@ -389,16 +401,15 @@ void cvm_oct_tasklet_rx(unsigned long unused)
struct net_device *dev = cvm_oct_device[work->ipprt];
struct octeon_ethernet *priv = netdev_priv(dev);
- /* Only accept packets for devices
- that are currently up */
+ /*
+ * Only accept packets for devices that are
+ * currently up.
+ */
if (likely(dev->flags & IFF_UP)) {
skb->protocol = eth_type_trans(skb, dev);
skb->dev = dev;
- if (unlikely
- (work->word2.s.not_IP
- || work->word2.s.IP_exc
- || work->word2.s.L4_error))
+ if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error))
skb->ip_summed = CHECKSUM_NONE;
else
skb->ip_summed = CHECKSUM_UNNECESSARY;
@@ -414,15 +425,13 @@ void cvm_oct_tasklet_rx(unsigned long unused)
#endif
}
netif_receive_skb(skb);
+ rx_count++;
} else {
+ /* Drop any packet received for a device that isn't up */
/*
- * Drop any packet received for a
- * device that isn't up.
- */
- /*
- DEBUGPRINT("%s: Device not up, packet dropped\n",
- dev->name);
- */
+ DEBUGPRINT("%s: Device not up, packet dropped\n",
+ dev->name);
+ */
#ifdef CONFIG_64BIT
atomic64_add(1, (atomic64_t *)&priv->stats.rx_dropped);
#else
@@ -435,9 +444,8 @@ void cvm_oct_tasklet_rx(unsigned long unused)
* Drop any packet received for a device that
* doesn't exist.
*/
- DEBUGPRINT("Port %d not controlled by Linux, packet "
- "dropped\n",
- work->ipprt);
+ DEBUGPRINT("Port %d not controlled by Linux, packet dropped\n",
+ work->ipprt);
dev_kfree_skb_irq(skb);
}
/*
@@ -459,47 +467,93 @@ void cvm_oct_tasklet_rx(unsigned long unused)
cvm_oct_free_work(work);
}
}
-
/* Restore the original POW group mask */
cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask);
if (USE_ASYNC_IOBDMA) {
/* Restore the scratch area */
cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
}
+ cvm_oct_rx_refill_pool(0);
- if (USE_SKBUFFS_IN_HW) {
- /* Refill the packet buffer pool */
- number_to_free =
- cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
-
- if (number_to_free > 0) {
- cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
- -number_to_free);
- num_freed =
- cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
- CVMX_FPA_PACKET_POOL_SIZE,
- number_to_free);
- if (num_freed != number_to_free) {
- cvmx_fau_atomic_add32
- (FAU_NUM_PACKET_BUFFERS_TO_FREE,
- number_to_free - num_freed);
- }
- }
+ if (rx_count < budget && napi != NULL) {
+ /* No more work */
+ napi_complete(napi);
+ cvm_oct_no_more_work();
}
+ return rx_count;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * cvm_oct_poll_controller - poll for receive packets
+ * device.
+ *
+ * @dev: Device to poll. Unused
+ */
+void cvm_oct_poll_controller(struct net_device *dev)
+{
+ cvm_oct_napi_poll(NULL, 16);
+}
+#endif
+
void cvm_oct_rx_initialize(void)
{
int i;
- /* Initialize all of the tasklets */
- for (i = 0; i < NR_CPUS; i++)
- tasklet_init(&cvm_oct_tasklet[i].t, cvm_oct_tasklet_rx, 0);
+ struct net_device *dev_for_napi = NULL;
+ union cvmx_pow_wq_int_thrx int_thr;
+ union cvmx_pow_wq_int_pc int_pc;
+
+ for (i = 0; i < TOTAL_NUMBER_OF_PORTS; i++) {
+ if (cvm_oct_device[i]) {
+ dev_for_napi = cvm_oct_device[i];
+ break;
+ }
+ }
+
+ if (NULL == dev_for_napi)
+ panic("No net_devices were allocated.");
+
+ if (max_rx_cpus > 1 && max_rx_cpus < num_online_cpus())
+ atomic_set(&core_state.available_cores, max_rx_cpus);
+ else
+ atomic_set(&core_state.available_cores, num_online_cpus());
+ core_state.baseline_cores = atomic_read(&core_state.available_cores);
+
+ core_state.cpu_state = CPU_MASK_NONE;
+ for_each_possible_cpu(i) {
+ netif_napi_add(dev_for_napi, &cvm_oct_napi[i].napi,
+ cvm_oct_napi_poll, rx_napi_weight);
+ napi_enable(&cvm_oct_napi[i].napi);
+ }
+ /* Register an IRQ hander for to receive POW interrupts */
+ i = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
+ cvm_oct_do_interrupt, 0, "Ethernet", cvm_oct_device);
+
+ if (i)
+ panic("Could not acquire Ethernet IRQ %d\n",
+ OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+ disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group);
+
+ int_thr.u64 = 0;
+ int_thr.s.tc_en = 1;
+ int_thr.s.tc_thr = 1;
+ /* Enable POW interrupt when our port has at least one packet */
+ cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), int_thr.u64);
+
+ int_pc.u64 = 0;
+ int_pc.s.pc_thr = 5;
+ cvmx_write_csr(CVMX_POW_WQ_INT_PC, int_pc.u64);
+
+
+ /* Scheduld NAPI now. This will indirectly enable interrupts. */
+ cvm_oct_enable_one_cpu();
}
void cvm_oct_rx_shutdown(void)
{
int i;
- /* Shutdown all of the tasklets */
- for (i = 0; i < NR_CPUS; i++)
- tasklet_kill(&cvm_oct_tasklet[i].t);
+ /* Shutdown all of the NAPIs */
+ for_each_possible_cpu(i)
+ netif_napi_del(&cvm_oct_napi[i].napi);
}
diff --git a/drivers/staging/octeon/ethernet-rx.h b/drivers/staging/octeon/ethernet-rx.h
index a9b72b87a7a6..a0743b85d54e 100644
--- a/drivers/staging/octeon/ethernet-rx.h
+++ b/drivers/staging/octeon/ethernet-rx.h
@@ -24,10 +24,29 @@
* This file may also be available under a different license from Cavium.
* Contact Cavium Networks for more information
*********************************************************************/
+#include "cvmx-fau.h"
-irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id);
void cvm_oct_poll_controller(struct net_device *dev);
-void cvm_oct_tasklet_rx(unsigned long unused);
-
void cvm_oct_rx_initialize(void);
void cvm_oct_rx_shutdown(void);
+
+static inline void cvm_oct_rx_refill_pool(int fill_threshold)
+{
+ int number_to_free;
+ int num_freed;
+ /* Refill the packet buffer pool */
+ number_to_free =
+ cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
+
+ if (number_to_free > fill_threshold) {
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+ -number_to_free);
+ num_freed = cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL,
+ CVMX_FPA_PACKET_POOL_SIZE,
+ number_to_free);
+ if (num_freed != number_to_free) {
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE,
+ number_to_free - num_freed);
+ }
+ }
+}
diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c
index 6061d01eca2d..2d8589eb461e 100644
--- a/drivers/staging/octeon/ethernet-sgmii.c
+++ b/drivers/staging/octeon/ethernet-sgmii.c
@@ -26,7 +26,6 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c
index 00dc0f4bad19..b58b8971f939 100644
--- a/drivers/staging/octeon/ethernet-spi.c
+++ b/drivers/staging/octeon/ethernet-spi.c
@@ -26,7 +26,6 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c
index 535294105f65..afc2b734d554 100644
--- a/drivers/staging/octeon/ethernet-tx.c
+++ b/drivers/staging/octeon/ethernet-tx.c
@@ -4,7 +4,7 @@
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
@@ -31,10 +31,6 @@
#include <linux/etherdevice.h>
#include <linux/ip.h>
#include <linux/string.h>
-#include <linux/ethtool.h>
-#include <linux/mii.h>
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
#include <net/dst.h>
#ifdef CONFIG_XFRM
#include <linux/xfrm.h>
@@ -52,11 +48,14 @@
#include "cvmx-wqe.h"
#include "cvmx-fau.h"
+#include "cvmx-pip.h"
#include "cvmx-pko.h"
#include "cvmx-helper.h"
#include "cvmx-gmxx-defs.h"
+#define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb))
+
/*
* You can define GET_SKBUFF_QOS() to override how the skbuff output
* function determines which output queue is used. The default
@@ -68,12 +67,81 @@
#define GET_SKBUFF_QOS(skb) 0
#endif
+static void cvm_oct_tx_do_cleanup(unsigned long arg);
+static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup, 0);
+
+/* Maximum number of SKBs to try to free per xmit packet. */
+#define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2)
+
+static inline int32_t cvm_oct_adjust_skb_to_free(int32_t skb_to_free, int fau)
+{
+ int32_t undo;
+ undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
+ if (undo > 0)
+ cvmx_fau_atomic_add32(fau, -undo);
+ skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : -skb_to_free;
+ return skb_to_free;
+}
+
+static void cvm_oct_kick_tx_poll_watchdog(void)
+{
+ union cvmx_ciu_timx ciu_timx;
+ ciu_timx.u64 = 0;
+ ciu_timx.s.one_shot = 1;
+ ciu_timx.s.len = cvm_oct_tx_poll_interval;
+ cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64);
+}
+
+void cvm_oct_free_tx_skbs(struct net_device *dev)
+{
+ int32_t skb_to_free;
+ int qos, queues_per_port;
+ int total_freed = 0;
+ int total_remaining = 0;
+ unsigned long flags;
+ struct octeon_ethernet *priv = netdev_priv(dev);
+
+ queues_per_port = cvmx_pko_get_num_queues(priv->port);
+ /* Drain any pending packets in the free list */
+ for (qos = 0; qos < queues_per_port; qos++) {
+ if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
+ continue;
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4, MAX_SKB_TO_FREE);
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
+
+
+ total_freed += skb_to_free;
+ if (skb_to_free > 0) {
+ struct sk_buff *to_free_list = NULL;
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ while (skb_to_free > 0) {
+ struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+ t->next = to_free_list;
+ to_free_list = t;
+ skb_to_free--;
+ }
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+ /* Do the actual freeing outside of the lock. */
+ while (to_free_list) {
+ struct sk_buff *t = to_free_list;
+ to_free_list = to_free_list->next;
+ dev_kfree_skb_any(t);
+ }
+ }
+ total_remaining += skb_queue_len(&priv->tx_free_list[qos]);
+ }
+ if (total_freed >= 0 && netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+ if (total_remaining)
+ cvm_oct_kick_tx_poll_watchdog();
+}
+
/**
- * Packet transmit
- *
+ * cvm_oct_xmit - transmit a packet
* @skb: Packet to send
* @dev: Device info structure
- * Returns Always returns zero
+ *
+ * Returns Always returns NETDEV_TX_OK
*/
int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
{
@@ -81,13 +149,15 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
union cvmx_buf_ptr hw_buffer;
uint64_t old_scratch;
uint64_t old_scratch2;
- int dropped;
int qos;
- int queue_it_up;
+ int i;
+ enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type;
struct octeon_ethernet *priv = netdev_priv(dev);
+ struct sk_buff *to_free_list;
int32_t skb_to_free;
- int32_t undo;
int32_t buffers_to_free;
+ u32 total_to_clean;
+ unsigned long flags;
#if REUSE_SKBUFFS_WITHOUT_FREE
unsigned char *fpa_head;
#endif
@@ -98,9 +168,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
*/
prefetch(priv);
- /* Start off assuming no drop */
- dropped = 0;
-
/*
* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to
* completely remove "qos" in the event neither interface
@@ -135,6 +202,28 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
}
/*
+ * We have space for 6 segment pointers, If there will be more
+ * than that, we must linearize.
+ */
+ if (unlikely(skb_shinfo(skb)->nr_frags > 5)) {
+ if (unlikely(__skb_linearize(skb))) {
+ queue_type = QUEUE_DROP;
+ if (USE_ASYNC_IOBDMA) {
+ /* Get the number of skbuffs in use by the hardware */
+ CVMX_SYNCIOBDMA;
+ skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
+ } else {
+ /* Get the number of skbuffs in use by the hardware */
+ skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
+ MAX_SKB_TO_FREE);
+ }
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ goto skip_xmit;
+ }
+ }
+
+ /*
* The CN3XXX series of parts has an errata (GMX-401) which
* causes the GMX block to hang if a collision occurs towards
* the end of a <68 byte packet. As a workaround for this, we
@@ -162,13 +251,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
}
}
- /* Build the PKO buffer pointer */
- hw_buffer.u64 = 0;
- hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data);
- hw_buffer.s.pool = 0;
- hw_buffer.s.size =
- (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head;
-
/* Build the PKO command */
pko_command.u64 = 0;
pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
@@ -178,7 +260,31 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
pko_command.s.subone0 = 1;
pko_command.s.dontfree = 1;
- pko_command.s.reg0 = priv->fau + qos * 4;
+
+ /* Build the PKO buffer pointer */
+ hw_buffer.u64 = 0;
+ if (skb_shinfo(skb)->nr_frags == 0) {
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.pool = 0;
+ hw_buffer.s.size = skb->len;
+ } else {
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data);
+ hw_buffer.s.pool = 0;
+ hw_buffer.s.size = skb_headlen(skb);
+ CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64;
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i;
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset));
+ hw_buffer.s.size = fs->size;
+ CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64;
+ }
+ hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb));
+ hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1;
+ pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1;
+ pko_command.s.gather = 1;
+ goto dont_put_skbuff_in_hw;
+ }
+
/*
* See if we can put this skb in the FPA pool. Any strange
* behavior from the Linux networking stack will most likely
@@ -190,7 +296,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
* shown a 25% increase in performance under some loads.
*/
#if REUSE_SKBUFFS_WITHOUT_FREE
- fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f);
+ fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f);
if (unlikely(skb->data < fpa_head)) {
/*
* printk("TX buffer beginning can't meet FPA
@@ -248,10 +354,9 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
* We can use this buffer in the FPA. We don't need the FAU
* update anymore
*/
- pko_command.s.reg0 = 0;
pko_command.s.dontfree = 0;
- hw_buffer.s.back = (skb->data - fpa_head) >> 7;
+ hw_buffer.s.back = ((unsigned long)skb->data >> 7) - ((unsigned long)fpa_head >> 7);
*(struct sk_buff **)(fpa_head - sizeof(void *)) = skb;
/*
@@ -272,16 +377,16 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev)
skb->tc_verd = 0;
#endif /* CONFIG_NET_CLS_ACT */
#endif /* CONFIG_NET_SCHED */
+#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
dont_put_skbuff_in_hw:
-#endif /* REUSE_SKBUFFS_WITHOUT_FREE */
/* Check if we can use the hardware checksumming */
if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) &&
(ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) &&
((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14))
- && ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
- || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) {
+ && ((ip_hdr(skb)->protocol == IPPROTO_TCP)
+ || (ip_hdr(skb)->protocol == IPPROTO_UDP))) {
/* Use hardware checksum calc */
pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
}
@@ -299,89 +404,116 @@ dont_put_skbuff_in_hw:
cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
}
- /*
- * We try to claim MAX_SKB_TO_FREE buffers. If there were not
- * that many available, we have to un-claim (undo) any that
- * were in excess. If skb_to_free is positive we will free
- * that many buffers.
- */
- undo = skb_to_free > 0 ?
- MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
- if (undo > 0)
- cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
- skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
- MAX_SKB_TO_FREE : -skb_to_free;
+ skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4);
/*
* If we're sending faster than the receive can free them then
* don't do the HW free.
*/
- if ((buffers_to_free < -100) && !pko_command.s.dontfree) {
+ if ((buffers_to_free < -100) && !pko_command.s.dontfree)
pko_command.s.dontfree = 1;
- pko_command.s.reg0 = priv->fau + qos * 4;
+
+ if (pko_command.s.dontfree) {
+ queue_type = QUEUE_CORE;
+ pko_command.s.reg0 = priv->fau+qos*4;
+ } else {
+ queue_type = QUEUE_HW;
}
+ if (USE_ASYNC_IOBDMA)
+ cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1);
- cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
- CVMX_PKO_LOCK_CMD_QUEUE);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
/* Drop this packet if we have too many already queued to the HW */
- if (unlikely
- (skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
- /*
- DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name);
- */
- dropped = 1;
+ if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) {
+ if (dev->tx_queue_len != 0) {
+ /* Drop the lock when notifying the core. */
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+ netif_stop_queue(dev);
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ } else {
+ /* If not using normal queueing. */
+ queue_type = QUEUE_DROP;
+ goto skip_xmit;
+ }
}
+
+ cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
+ CVMX_PKO_LOCK_NONE);
+
/* Send the packet to the output queue */
- else if (unlikely
- (cvmx_pko_send_packet_finish
- (priv->port, priv->queue + qos, pko_command, hw_buffer,
- CVMX_PKO_LOCK_CMD_QUEUE))) {
+ if (unlikely(cvmx_pko_send_packet_finish(priv->port,
+ priv->queue + qos,
+ pko_command, hw_buffer,
+ CVMX_PKO_LOCK_NONE))) {
DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
- dropped = 1;
+ queue_type = QUEUE_DROP;
+ }
+skip_xmit:
+ to_free_list = NULL;
+
+ switch (queue_type) {
+ case QUEUE_DROP:
+ skb->next = to_free_list;
+ to_free_list = skb;
+ priv->stats.tx_dropped++;
+ break;
+ case QUEUE_HW:
+ cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
+ break;
+ case QUEUE_CORE:
+ __skb_queue_tail(&priv->tx_free_list[qos], skb);
+ break;
+ default:
+ BUG();
+ }
+
+ while (skb_to_free > 0) {
+ struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]);
+ t->next = to_free_list;
+ to_free_list = t;
+ skb_to_free--;
+ }
+
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
+
+ /* Do the actual freeing outside of the lock. */
+ while (to_free_list) {
+ struct sk_buff *t = to_free_list;
+ to_free_list = to_free_list->next;
+ dev_kfree_skb_any(t);
}
if (USE_ASYNC_IOBDMA) {
+ CVMX_SYNCIOBDMA;
+ total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH);
/* Restore the scratch area */
cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch);
cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2);
- }
-
- queue_it_up = 0;
- if (unlikely(dropped)) {
- dev_kfree_skb_any(skb);
- priv->stats.tx_dropped++;
} else {
- if (USE_SKBUFFS_IN_HW) {
- /* Put this packet on the queue to be freed later */
- if (pko_command.s.dontfree)
- queue_it_up = 1;
- else
- cvmx_fau_atomic_add32
- (FAU_NUM_PACKET_BUFFERS_TO_FREE, -1);
- } else {
- /* Put this packet on the queue to be freed later */
- queue_it_up = 1;
- }
+ total_to_clean = cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1);
}
- if (queue_it_up) {
- spin_lock(&priv->tx_free_list[qos].lock);
- __skb_queue_tail(&priv->tx_free_list[qos], skb);
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 0);
- spin_unlock(&priv->tx_free_list[qos].lock);
- } else {
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
+ if (total_to_clean & 0x3ff) {
+ /*
+ * Schedule the cleanup tasklet every 1024 packets for
+ * the pathological case of high traffic on one port
+ * delaying clean up of packets on a different port
+ * that is blocked waiting for the cleanup.
+ */
+ tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
}
- return 0;
+ cvm_oct_kick_tx_poll_watchdog();
+
+ return NETDEV_TX_OK;
}
/**
- * Packet transmit to the POW
- *
+ * cvm_oct_xmit_pow - transmit a packet to the POW
* @skb: Packet to send
* @dev: Device info structure
+
* Returns Always returns zero
*/
int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
@@ -459,8 +591,8 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
work->word2.s.dec_ipcomp = 0; /* FIXME */
#endif
work->word2.s.tcp_or_udp =
- (ip_hdr(skb)->protocol == IP_PROTOCOL_TCP)
- || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP);
+ (ip_hdr(skb)->protocol == IPPROTO_TCP)
+ || (ip_hdr(skb)->protocol == IPPROTO_UDP);
#if 0
/* FIXME */
work->word2.s.dec_ipsec = 0;
@@ -529,116 +661,63 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev)
}
/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- * @qos: Index into the queues for this port to transmit on. This
- * is used to implement QoS if their are multiple queues per
- * port. This parameter must be between 0 and the number of
- * queues per port minus 1. Values outside of this range will
- * be change to zero.
+ * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX.
+ * @dev: Device being shutdown
*
- * Returns Zero on success, negative on failure.
*/
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
- int do_free, int qos)
+void cvm_oct_tx_shutdown_dev(struct net_device *dev)
{
- unsigned long flags;
- union cvmx_buf_ptr hw_buffer;
- cvmx_pko_command_word0_t pko_command;
- int dropped;
struct octeon_ethernet *priv = netdev_priv(dev);
- cvmx_wqe_t *work = work_queue_entry;
+ unsigned long flags;
+ int qos;
- if (!(dev->flags & IFF_UP)) {
- DEBUGPRINT("%s: Device not up\n", dev->name);
- if (do_free)
- cvm_oct_free_work(work);
- return -1;
+ for (qos = 0; qos < 16; qos++) {
+ spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
+ while (skb_queue_len(&priv->tx_free_list[qos]))
+ dev_kfree_skb_any(__skb_dequeue
+ (&priv->tx_free_list[qos]));
+ spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
}
+}
- /* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely
- remove "qos" in the event neither interface supports
- multiple queues per port */
- if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) ||
- (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) {
- if (qos <= 0)
- qos = 0;
- else if (qos >= cvmx_pko_get_num_queues(priv->port))
- qos = 0;
- } else
- qos = 0;
-
- /* Start off assuming no drop */
- dropped = 0;
-
- local_irq_save(flags);
- cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos,
- CVMX_PKO_LOCK_CMD_QUEUE);
-
- /* Build the PKO buffer pointer */
- hw_buffer.u64 = 0;
- hw_buffer.s.addr = work->packet_ptr.s.addr;
- hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
- hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE;
- hw_buffer.s.back = work->packet_ptr.s.back;
+static void cvm_oct_tx_do_cleanup(unsigned long arg)
+{
+ int port;
- /* Build the PKO command */
- pko_command.u64 = 0;
- pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */
- pko_command.s.dontfree = !do_free;
- pko_command.s.segs = work->word2.s.bufs;
- pko_command.s.total_bytes = work->len;
+ for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
+ if (cvm_oct_device[port]) {
+ struct net_device *dev = cvm_oct_device[port];
+ cvm_oct_free_tx_skbs(dev);
+ }
+ }
+}
- /* Check if we can use the hardware checksumming */
- if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc))
- pko_command.s.ipoffp1 = 0;
- else
- pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1;
+static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id)
+{
+ /* Disable the interrupt. */
+ cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+ /* Do the work in the tasklet. */
+ tasklet_schedule(&cvm_oct_tx_cleanup_tasklet);
+ return IRQ_HANDLED;
+}
- /* Send the packet to the output queue */
- if (unlikely
- (cvmx_pko_send_packet_finish
- (priv->port, priv->queue + qos, pko_command, hw_buffer,
- CVMX_PKO_LOCK_CMD_QUEUE))) {
- DEBUGPRINT("%s: Failed to send the packet\n", dev->name);
- dropped = -1;
- }
- local_irq_restore(flags);
+void cvm_oct_tx_initialize(void)
+{
+ int i;
- if (unlikely(dropped)) {
- if (do_free)
- cvm_oct_free_work(work);
- priv->stats.tx_dropped++;
- } else if (do_free)
- cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1));
+ /* Disable the interrupt. */
+ cvmx_write_csr(CVMX_CIU_TIMX(1), 0);
+ /* Register an IRQ hander for to receive CIU_TIMX(1) interrupts */
+ i = request_irq(OCTEON_IRQ_TIMER1,
+ cvm_oct_tx_cleanup_watchdog, 0,
+ "Ethernet", cvm_oct_device);
- return dropped;
+ if (i)
+ panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1);
}
-EXPORT_SYMBOL(cvm_oct_transmit_qos);
-/**
- * This function frees all skb that are currently queued for TX.
- *
- * @dev: Device being shutdown
- */
-void cvm_oct_tx_shutdown(struct net_device *dev)
+void cvm_oct_tx_shutdown(void)
{
- struct octeon_ethernet *priv = netdev_priv(dev);
- unsigned long flags;
- int qos;
-
- for (qos = 0; qos < 16; qos++) {
- spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags);
- while (skb_queue_len(&priv->tx_free_list[qos]))
- dev_kfree_skb_any(__skb_dequeue
- (&priv->tx_free_list[qos]));
- spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags);
- }
+ /* Free the interrupt handler */
+ free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device);
}
diff --git a/drivers/staging/octeon/ethernet-tx.h b/drivers/staging/octeon/ethernet-tx.h
index c0bebf750bc0..547680c6c371 100644
--- a/drivers/staging/octeon/ethernet-tx.h
+++ b/drivers/staging/octeon/ethernet-tx.h
@@ -29,29 +29,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev);
int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev);
int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
int do_free, int qos);
-void cvm_oct_tx_shutdown(struct net_device *dev);
-
-/**
- * Free dead transmit skbs.
- *
- * @priv: The driver data
- * @skb_to_free: The number of SKBs to free (free none if negative).
- * @qos: The queue to free from.
- * @take_lock: If true, acquire the skb list lock.
- */
-static inline void cvm_oct_free_tx_skbs(struct octeon_ethernet *priv,
- int skb_to_free,
- int qos, int take_lock)
-{
- /* Free skbuffs not in use by the hardware. */
- if (skb_to_free > 0) {
- if (take_lock)
- spin_lock(&priv->tx_free_list[qos].lock);
- while (skb_to_free > 0) {
- dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos]));
- skb_to_free--;
- }
- if (take_lock)
- spin_unlock(&priv->tx_free_list[qos].lock);
- }
-}
+void cvm_oct_tx_initialize(void);
+void cvm_oct_tx_shutdown(void);
+void cvm_oct_tx_shutdown_dev(struct net_device *dev);
diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h
index 37b665918000..23467563fe57 100644
--- a/drivers/staging/octeon/ethernet-util.h
+++ b/drivers/staging/octeon/ethernet-util.h
@@ -30,10 +30,9 @@
} while (0)
/**
- * Given a packet data address, return a pointer to the
- * beginning of the packet buffer.
- *
+ * cvm_oct_get_buffer_ptr - convert packet data address to pointer
* @packet_ptr: Packet data hardware address
+ *
* Returns Packet buffer pointer
*/
static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
@@ -43,9 +42,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr)
}
/**
- * Given an IPD/PKO port number, return the logical interface it is
- * on.
- *
+ * INTERFACE - convert IPD port to locgical interface
* @ipd_port: Port to check
*
* Returns Logical interface
@@ -65,9 +62,7 @@ static inline int INTERFACE(int ipd_port)
}
/**
- * Given an IPD/PKO port number, return the port's index on a
- * logical interface.
- *
+ * INDEX - convert IPD/PKO port number to the port's interface index
* @ipd_port: Port to check
*
* Returns Index into interface port list
diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c
index ee3dc41b2c53..3fca1cc31ed8 100644
--- a/drivers/staging/octeon/ethernet-xaui.c
+++ b/drivers/staging/octeon/ethernet-xaui.c
@@ -26,7 +26,6 @@
**********************************************************************/
#include <linux/kernel.h>
#include <linux/netdevice.h>
-#include <linux/mii.h>
#include <net/dst.h>
#include <asm/octeon/octeon.h>
diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c
index 4cfd4b136b32..02b63678811a 100644
--- a/drivers/staging/octeon/ethernet.c
+++ b/drivers/staging/octeon/ethernet.c
@@ -29,7 +29,6 @@
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
-#include <linux/delay.h>
#include <linux/phy.h>
#include <net/dst.h>
@@ -43,8 +42,6 @@
#include "ethernet-tx.h"
#include "ethernet-mdio.h"
#include "ethernet-util.h"
-#include "ethernet-proc.h"
-
#include "cvmx-pip.h"
#include "cvmx-pko.h"
@@ -104,13 +101,15 @@ MODULE_PARM_DESC(pow_send_list, "\n"
"\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n"
"\tusing the pow_send_group.");
-static int disable_core_queueing = 1;
-module_param(disable_core_queueing, int, 0444);
-MODULE_PARM_DESC(disable_core_queueing, "\n"
- "\tWhen set the networking core's tx_queue_len is set to zero. This\n"
- "\tallows packets to be sent without lock contention in the packet\n"
- "\tscheduler resulting in some cases in improved throughput.\n");
+int max_rx_cpus = -1;
+module_param(max_rx_cpus, int, 0444);
+MODULE_PARM_DESC(max_rx_cpus, "\n"
+ "\t\tThe maximum number of CPUs to use for packet reception.\n"
+ "\t\tUse -1 to use all available CPUs.");
+int rx_napi_weight = 32;
+module_param(rx_napi_weight, int, 0444);
+MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter.");
/*
* The offset from mac_addr_base that should be used for the next port
@@ -122,9 +121,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n"
static unsigned int cvm_oct_mac_addr_offset;
/**
- * Periodic timer to check auto negotiation
+ * cvm_oct_poll_queue - Workqueue for polling operations.
+ */
+struct workqueue_struct *cvm_oct_poll_queue;
+
+/**
+ * cvm_oct_poll_queue_stopping - flag to indicate polling should stop.
+ *
+ * Set to one right before cvm_oct_poll_queue is destroyed.
*/
-static struct timer_list cvm_oct_poll_timer;
+atomic_t cvm_oct_poll_queue_stopping = ATOMIC_INIT(0);
/**
* Array of every ethernet device owned by this driver indexed by
@@ -132,65 +138,44 @@ static struct timer_list cvm_oct_poll_timer;
*/
struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS];
-/**
- * Periodic timer tick for slow management operations
- *
- * @arg: Device to check
- */
-static void cvm_do_timer(unsigned long arg)
+u64 cvm_oct_tx_poll_interval;
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work);
+static DECLARE_DELAYED_WORK(cvm_oct_rx_refill_work, cvm_oct_rx_refill_worker);
+
+static void cvm_oct_rx_refill_worker(struct work_struct *work)
{
- int32_t skb_to_free, undo;
- int queues_per_port;
- int qos;
- struct octeon_ethernet *priv;
- static int port;
+ /*
+ * FPA 0 may have been drained, try to refill it if we need
+ * more than num_packet_buffers / 2, otherwise normal receive
+ * processing will refill it. If it were drained, no packets
+ * could be received so cvm_oct_napi_poll would never be
+ * invoked to do the refill.
+ */
+ cvm_oct_rx_refill_pool(num_packet_buffers / 2);
- if (port >= CVMX_PIP_NUM_INPUT_PORTS) {
- /*
- * All ports have been polled. Start the next
- * iteration through the ports in one second.
- */
- port = 0;
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
- return;
- }
- if (!cvm_oct_device[port])
- goto out;
+ if (!atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_delayed_work(cvm_oct_poll_queue,
+ &cvm_oct_rx_refill_work, HZ);
+}
+
+static void cvm_oct_periodic_worker(struct work_struct *work)
+{
+ struct octeon_ethernet *priv = container_of(work,
+ struct octeon_ethernet,
+ port_periodic_work.work);
- priv = netdev_priv(cvm_oct_device[port]);
if (priv->poll)
- priv->poll(cvm_oct_device[port]);
-
- queues_per_port = cvmx_pko_get_num_queues(port);
- /* Drain any pending packets in the free list */
- for (qos = 0; qos < queues_per_port; qos++) {
- if (skb_queue_len(&priv->tx_free_list[qos]) == 0)
- continue;
- skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4,
- MAX_SKB_TO_FREE);
- undo = skb_to_free > 0 ?
- MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE;
- if (undo > 0)
- cvmx_fau_atomic_add32(priv->fau+qos*4, -undo);
- skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ?
- MAX_SKB_TO_FREE : -skb_to_free;
- cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1);
- }
- cvm_oct_device[port]->netdev_ops->ndo_get_stats(cvm_oct_device[port]);
+ priv->poll(cvm_oct_device[priv->port]);
-out:
- port++;
- /* Poll the next port in a 50th of a second.
- This spreads the polling of ports out a little bit */
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50);
-}
+ cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]);
+
+ if (!atomic_read(&cvm_oct_poll_queue_stopping))
+ queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ);
+ }
-/**
- * Configure common hardware for all interfaces
- */
static __init void cvm_oct_configure_common_hw(void)
{
- int r;
/* Setup the FPA */
cvmx_fpa_enable();
cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE,
@@ -205,28 +190,13 @@ static __init void cvm_oct_configure_common_hw(void)
cvmx_helper_setup_red(num_packet_buffers / 4,
num_packet_buffers / 8);
- /* Enable the MII interface */
- if (!octeon_is_simulation())
- cvmx_write_csr(CVMX_SMIX_EN(0), 1);
-
- /* Register an IRQ hander for to receive POW interrupts */
- r = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group,
- cvm_oct_do_interrupt, IRQF_SHARED, "Ethernet",
- cvm_oct_device);
-
-#if defined(CONFIG_SMP) && 0
- if (USE_MULTICORE_RECEIVE) {
- irq_set_affinity(OCTEON_IRQ_WORKQ0 + pow_receive_group,
- cpu_online_mask);
- }
-#endif
}
/**
- * Free a work queue entry received in a intercept callback.
+ * cvm_oct_free_work- Free a work queue entry
+ *
+ * @work_queue_entry: Work queue entry to free
*
- * @work_queue_entry:
- * Work queue entry to free
* Returns Zero on success, Negative on failure.
*/
int cvm_oct_free_work(void *work_queue_entry)
@@ -253,9 +223,9 @@ int cvm_oct_free_work(void *work_queue_entry)
EXPORT_SYMBOL(cvm_oct_free_work);
/**
- * Get the low level ethernet statistics
- *
+ * cvm_oct_common_get_stats - get the low level ethernet statistics
* @dev: Device to get the statistics from
+ *
* Returns Pointer to the statistics
*/
static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
@@ -299,8 +269,7 @@ static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev)
}
/**
- * Change the link MTU. Unimplemented
- *
+ * cvm_oct_common_change_mtu - change the link MTU
* @dev: Device to change
* @new_mtu: The new MTU
*
@@ -364,8 +333,7 @@ static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu)
}
/**
- * Set the multicast list. Currently unimplemented.
- *
+ * cvm_oct_common_set_multicast_list - set the multicast list
* @dev: Device to work on
*/
static void cvm_oct_common_set_multicast_list(struct net_device *dev)
@@ -420,10 +388,10 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev)
}
/**
- * Set the hardware MAC address for a device
- *
- * @dev: Device to change the MAC address for
- * @addr: Address structure to change it too. MAC address is addr + 2.
+ * cvm_oct_common_set_mac_address - set the hardware MAC address for a device
+ * @dev: The device in question.
+ * @addr: Address structure to change it too.
+
* Returns Zero on success
*/
static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
@@ -470,9 +438,9 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr)
}
/**
- * Per network device initialization
- *
+ * cvm_oct_common_init - per network device initialization
* @dev: Device to initialize
+ *
* Returns Zero on success
*/
int cvm_oct_common_init(struct net_device *dev)
@@ -510,8 +478,11 @@ int cvm_oct_common_init(struct net_device *dev)
&& (always_use_pow || strstr(pow_send_list, dev->name)))
priv->queue = -1;
- if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
- dev->features |= NETIF_F_IP_CSUM;
+ if (priv->queue != -1) {
+ dev->features |= NETIF_F_SG;
+ if (USE_HW_TCPUDP_CHECKSUM)
+ dev->features |= NETIF_F_IP_CSUM;
+ }
/* We do our own locking, Linux doesn't need to */
dev->features |= NETIF_F_LLTX;
@@ -625,12 +596,6 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = {
extern void octeon_mdiobus_force_mod_depencency(void);
-/**
- * Module/ driver initialization. Creates the linux network
- * devices.
- *
- * Returns Zero on success
- */
static int __init cvm_oct_init_module(void)
{
int num_interfaces;
@@ -648,8 +613,12 @@ static int __init cvm_oct_init_module(void)
else
cvm_oct_mac_addr_offset = 0;
- cvm_oct_proc_initialize();
- cvm_oct_rx_initialize();
+ cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet");
+ if (cvm_oct_poll_queue == NULL) {
+ pr_err("octeon-ethernet: Cannot create workqueue");
+ return -ENOMEM;
+ }
+
cvm_oct_configure_common_hw();
cvmx_helper_initialize_packet_io_global();
@@ -682,6 +651,9 @@ static int __init cvm_oct_init_module(void)
*/
cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0);
+ /* Initialize the FAU used for counting tx SKBs that need to be freed */
+ cvmx_fau_atomic_write32(FAU_TOTAL_TX_TO_CLEAN, 0);
+
if ((pow_send_group != -1)) {
struct net_device *dev;
pr_info("\tConfiguring device for POW only access\n");
@@ -689,7 +661,6 @@ static int __init cvm_oct_init_module(void)
if (dev) {
/* Initialize the device private structure. */
struct octeon_ethernet *priv = netdev_priv(dev);
- memset(priv, 0, sizeof(struct octeon_ethernet));
dev->netdev_ops = &cvm_oct_pow_netdev_ops;
priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED;
@@ -700,19 +671,16 @@ static int __init cvm_oct_init_module(void)
skb_queue_head_init(&priv->tx_free_list[qos]);
if (register_netdev(dev) < 0) {
- pr_err("Failed to register ethernet "
- "device for POW\n");
+ pr_err("Failed to register ethernet device for POW\n");
kfree(dev);
} else {
cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev;
- pr_info("%s: POW send group %d, receive "
- "group %d\n",
- dev->name, pow_send_group,
- pow_receive_group);
+ pr_info("%s: POW send group %d, receive group %d\n",
+ dev->name, pow_send_group,
+ pow_receive_group);
}
} else {
- pr_err("Failed to allocate ethernet device "
- "for POW\n");
+ pr_err("Failed to allocate ethernet device for POW\n");
}
}
@@ -730,17 +698,15 @@ static int __init cvm_oct_init_module(void)
struct net_device *dev =
alloc_etherdev(sizeof(struct octeon_ethernet));
if (!dev) {
- pr_err("Failed to allocate ethernet device "
- "for port %d\n", port);
+ pr_err("Failed to allocate ethernet device for port %d\n", port);
continue;
}
- if (disable_core_queueing)
- dev->tx_queue_len = 0;
/* Initialize the device private structure. */
priv = netdev_priv(dev);
- memset(priv, 0, sizeof(struct octeon_ethernet));
+ INIT_DELAYED_WORK(&priv->port_periodic_work,
+ cvm_oct_periodic_worker);
priv->imode = imode;
priv->port = port;
priv->queue = cvmx_pko_get_base_queue(priv->port);
@@ -803,44 +769,25 @@ static int __init cvm_oct_init_module(void)
fau -=
cvmx_pko_get_num_queues(priv->port) *
sizeof(uint32_t);
+ queue_delayed_work(cvm_oct_poll_queue,
+ &priv->port_periodic_work, HZ);
}
}
}
- if (INTERRUPT_LIMIT) {
- /*
- * Set the POW timer rate to give an interrupt at most
- * INTERRUPT_LIMIT times per second.
- */
- cvmx_write_csr(CVMX_POW_WQ_INT_PC,
- octeon_bootinfo->eclock_hz / (INTERRUPT_LIMIT *
- 16 * 256) << 8);
+ cvm_oct_tx_initialize();
+ cvm_oct_rx_initialize();
- /*
- * Enable POW timer interrupt. It will count when
- * there are packets available.
- */
- cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group),
- 0x1ful << 24);
- } else {
- /* Enable POW interrupt when our port has at least one packet */
- cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0x1001);
- }
+ /*
+ * 150 uS: about 10 1500-byte packtes at 1GE.
+ */
+ cvm_oct_tx_poll_interval = 150 * (octeon_get_clock_rate() / 1000000);
- /* Enable the poll timer for checking RGMII status */
- init_timer(&cvm_oct_poll_timer);
- cvm_oct_poll_timer.data = 0;
- cvm_oct_poll_timer.function = cvm_do_timer;
- mod_timer(&cvm_oct_poll_timer, jiffies + HZ);
+ queue_delayed_work(cvm_oct_poll_queue, &cvm_oct_rx_refill_work, HZ);
return 0;
}
-/**
- * Module / driver shutdown
- *
- * Returns Zero on success
- */
static void __exit cvm_oct_cleanup_module(void)
{
int port;
@@ -853,22 +800,31 @@ static void __exit cvm_oct_cleanup_module(void)
/* Free the interrupt handler */
free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device);
- del_timer(&cvm_oct_poll_timer);
+ atomic_inc_return(&cvm_oct_poll_queue_stopping);
+ cancel_delayed_work_sync(&cvm_oct_rx_refill_work);
+
cvm_oct_rx_shutdown();
+ cvm_oct_tx_shutdown();
+
cvmx_pko_disable();
/* Free the ethernet devices */
for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) {
if (cvm_oct_device[port]) {
- cvm_oct_tx_shutdown(cvm_oct_device[port]);
- unregister_netdev(cvm_oct_device[port]);
- kfree(cvm_oct_device[port]);
+ struct net_device *dev = cvm_oct_device[port];
+ struct octeon_ethernet *priv = netdev_priv(dev);
+ cancel_delayed_work_sync(&priv->port_periodic_work);
+
+ cvm_oct_tx_shutdown_dev(dev);
+ unregister_netdev(dev);
+ kfree(dev);
cvm_oct_device[port] = NULL;
}
}
+ destroy_workqueue(cvm_oct_poll_queue);
+
cvmx_pko_shutdown();
- cvm_oct_proc_shutdown();
cvmx_ipd_free_ptr();
diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h
index 402a15b9bb0e..d58192563552 100644
--- a/drivers/staging/octeon/octeon-ethernet.h
+++ b/drivers/staging/octeon/octeon-ethernet.h
@@ -4,7 +4,7 @@
* Contact: support@caviumnetworks.com
* This file is part of the OCTEON SDK
*
- * Copyright (c) 2003-2007 Cavium Networks
+ * Copyright (c) 2003-2010 Cavium Networks
*
* This file is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License, Version 2, as
@@ -57,58 +57,12 @@ struct octeon_ethernet {
uint64_t link_info;
/* Called periodically to check link status */
void (*poll) (struct net_device *dev);
+ struct delayed_work port_periodic_work;
+ struct work_struct port_work; /* may be unused. */
};
-/**
- * Free a work queue entry received in a intercept callback.
- *
- * @work_queue_entry:
- * Work queue entry to free
- * Returns Zero on success, Negative on failure.
- */
int cvm_oct_free_work(void *work_queue_entry);
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- * @qos: Index into the queues for this port to transmit on. This
- * is used to implement QoS if their are multiple queues per
- * port. This parameter must be between 0 and the number of
- * queues per port minus 1. Values outside of this range will
- * be change to zero.
- *
- * Returns Zero on success, negative on failure.
- */
-int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry,
- int do_free, int qos);
-
-/**
- * Transmit a work queue entry out of the ethernet port. Both
- * the work queue entry and the packet data can optionally be
- * freed. The work will be freed on error as well. This simply
- * wraps cvmx_oct_transmit_qos() for backwards compatability.
- *
- * @dev: Device to transmit out.
- * @work_queue_entry:
- * Work queue entry to send
- * @do_free: True if the work queue entry and packet data should be
- * freed. If false, neither will be freed.
- *
- * Returns Zero on success, negative on failure.
- */
-static inline int cvm_oct_transmit(struct net_device *dev,
- void *work_queue_entry, int do_free)
-{
- return cvm_oct_transmit_qos(dev, work_queue_entry, do_free, 0);
-}
-
extern int cvm_oct_rgmii_init(struct net_device *dev);
extern void cvm_oct_rgmii_uninit(struct net_device *dev);
extern int cvm_oct_rgmii_open(struct net_device *dev);
@@ -134,5 +88,11 @@ extern int pow_send_group;
extern int pow_receive_group;
extern char pow_send_list[];
extern struct net_device *cvm_oct_device[];
+extern struct workqueue_struct *cvm_oct_poll_queue;
+extern atomic_t cvm_oct_poll_queue_stopping;
+extern u64 cvm_oct_tx_poll_interval;
+
+extern int max_rx_cpus;
+extern int rx_napi_weight;
#endif
diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c
index 133b86c6a678..2fff0a0052d1 100644
--- a/drivers/staging/sm7xx/smtc2d.c
+++ b/drivers/staging/sm7xx/smtc2d.c
@@ -5,7 +5,7 @@
* Author: Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h
index 38d0c335322b..02b4fa29136c 100644
--- a/drivers/staging/sm7xx/smtc2d.h
+++ b/drivers/staging/sm7xx/smtc2d.h
@@ -5,7 +5,7 @@
* Author: Ge Wang, gewang@siliconmotion.com
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c
index 161dbc9c1397..a4f6f49aef48 100644
--- a/drivers/staging/sm7xx/smtcfb.c
+++ b/drivers/staging/sm7xx/smtcfb.c
@@ -6,7 +6,7 @@
* Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h
index 7f2c34138215..7ee565c2c952 100644
--- a/drivers/staging/sm7xx/smtcfb.h
+++ b/drivers/staging/sm7xx/smtcfb.h
@@ -6,7 +6,7 @@
* Boyod boyod.yang@siliconmotion.com.cn
*
* Copyright (C) 2009 Lemote, Inc.
- * Author: Wu Zhangjin, wuzj@lemote.com
+ * Author: Wu Zhangjin, wuzhangjin@gmail.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c
index 2e94b71b20d9..2bb95cd308c1 100644
--- a/drivers/watchdog/ar7_wdt.c
+++ b/drivers/watchdog/ar7_wdt.c
@@ -34,6 +34,7 @@
#include <linux/ioport.h>
#include <linux/io.h>
#include <linux/uaccess.h>
+#include <linux/clk.h>
#include <asm/addrspace.h>
#include <asm/mach-ar7/ar7.h>
@@ -80,6 +81,8 @@ static struct resource *ar7_regs_wdt;
/* Pointer to the remapped WDT IO space */
static struct ar7_wdt *ar7_wdt;
+static struct clk *vbus_clk;
+
static void ar7_wdt_kick(u32 value)
{
WRITE_REG(ar7_wdt->kick_lock, 0x5555);
@@ -138,17 +141,19 @@ static void ar7_wdt_disable(u32 value)
static void ar7_wdt_update_margin(int new_margin)
{
u32 change;
+ u32 vbus_rate;
- change = new_margin * (ar7_vbus_freq() / prescale_value);
+ vbus_rate = clk_get_rate(vbus_clk);
+ change = new_margin * (vbus_rate / prescale_value);
if (change < 1)
change = 1;
if (change > 0xffff)
change = 0xffff;
ar7_wdt_change(change);
- margin = change * prescale_value / ar7_vbus_freq();
+ margin = change * prescale_value / vbus_rate;
printk(KERN_INFO DRVNAME
": timer margin %d seconds (prescale %d, change %d, freq %d)\n",
- margin, prescale_value, change, ar7_vbus_freq());
+ margin, prescale_value, change, vbus_rate);
}
static void ar7_wdt_enable_wdt(void)
@@ -298,6 +303,13 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev)
goto out_mem_region;
}
+ vbus_clk = clk_get(NULL, "vbus");
+ if (IS_ERR(vbus_clk)) {
+ printk(KERN_ERR DRVNAME ": could not get vbus clock\n");
+ rc = PTR_ERR(vbus_clk);
+ goto out_mem_region;
+ }
+
ar7_wdt_disable_wdt();
ar7_wdt_prescale(prescale_value);
ar7_wdt_update_margin(margin);