summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorBjörn Gerhart <oss@extracloud.de>2011-12-13 13:19:58 -0500
committerGuenter Roeck <guenter.roeck@ericsson.com>2012-01-05 08:19:32 -0800
commitf58c44e698a8362d2ab2d1c966ca80b748ff9ff9 (patch)
treebd60a488afc116ece796fa24238437dea42b55a7 /drivers
parent5cd3222a9f3742e3da6becbd1a939e1221e030c4 (diff)
hwmon: (f75375s) Add support for F75387SG/RG
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it to the F75375S driver. Fan support for F75387SG/RG has been implemented but not tested. Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/f75375s.c175
2 files changed, 130 insertions, 49 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 91be41f60809..cb351d358387 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -367,11 +367,11 @@ config SENSORS_F71882FG
will be called f71882fg.
config SENSORS_F75375S
- tristate "Fintek F75375S/SP and F75373"
+ tristate "Fintek F75375S/SP, F75373 and F75387"
depends on I2C
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F75375S/SP and F75373
+ features of the Fintek F75375S/SP, F75373 and F75387
This driver can also be built as a module. If so, the module
will be called f75375s.
diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c
index 35b570e56ff0..eedf574ab539 100644
--- a/drivers/hwmon/f75375s.c
+++ b/drivers/hwmon/f75375s.c
@@ -1,6 +1,6 @@
/*
- * f75375s.c - driver for the Fintek F75375/SP and F75373
- * hardware monitoring features
+ * f75375s.c - driver for the Fintek F75375/SP, F75373 and
+ * F75387SG/RG hardware monitoring features
* Copyright (C) 2006-2007 Riku Voipio
*
* Datasheets available at:
@@ -11,6 +11,9 @@
* f75373:
* http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf
*
+ * f75387:
+ * http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -40,7 +43,7 @@
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
-enum chips { f75373, f75375 };
+enum chips { f75373, f75375, f75387 };
/* Fintek F75375 registers */
#define F75375_REG_CONFIG0 0x0
@@ -59,6 +62,7 @@ enum chips { f75373, f75375 };
#define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
#define F75375_REG_TEMP(nr) (0x14 + (nr))
+#define F75387_REG_TEMP11_LSB(nr) (0x1a + (nr))
#define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
#define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
@@ -78,8 +82,11 @@ enum chips { f75373, f75375 };
#define F75375_REG_PWM1_DROP_DUTY 0x6B
#define F75375_REG_PWM2_DROP_DUTY 0x6C
-#define FAN_CTRL_LINEAR(nr) (4 + nr)
+#define F75375_FAN_CTRL_LINEAR(nr) (4 + nr)
+#define F75387_FAN_CTRL_LINEAR(nr) (1 + ((nr) * 4))
#define FAN_CTRL_MODE(nr) (4 + ((nr) * 2))
+#define F75387_FAN_DUTY_MODE(nr) (2 + ((nr) * 4))
+#define F75387_FAN_MANU_MODE(nr) ((nr) * 4)
/*
* Data structures and manipulation thereof
@@ -108,7 +115,12 @@ struct f75375_data {
u8 pwm[2];
u8 pwm_mode[2];
u8 pwm_enable[2];
- s8 temp[2];
+ /*
+ * f75387: For remote temperature reading, it uses signed 11-bit
+ * values with LSB = 0.125 degree Celsius, left-justified in 16-bit
+ * registers. For original 8-bit temp readings, the LSB just is 0.
+ */
+ s16 temp11[2];
s8 temp_high[2];
s8 temp_max_hyst[2];
};
@@ -122,6 +134,7 @@ static int f75375_remove(struct i2c_client *client);
static const struct i2c_device_id f75375_id[] = {
{ "f75373", f75373 },
{ "f75375", f75375 },
+ { "f75387", f75387 },
{ }
};
MODULE_DEVICE_TABLE(i2c, f75375_id);
@@ -205,8 +218,14 @@ static struct f75375_data *f75375_update_device(struct device *dev)
if (time_after(jiffies, data->last_updated + 2 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
- data->temp[nr] =
- f75375_read8(client, F75375_REG_TEMP(nr));
+ /* assign MSB, therefore shift it by 8 bits */
+ data->temp11[nr] =
+ f75375_read8(client, F75375_REG_TEMP(nr)) << 8;
+ if (data->kind == f75387)
+ /* merge F75387's temperature LSB (11-bit) */
+ data->temp11[nr] |=
+ f75375_read8(client,
+ F75387_REG_TEMP11_LSB(nr));
data->fan[nr] =
f75375_read16(client, F75375_REG_FAN(nr));
}
@@ -313,24 +332,50 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
- fanmode &= ~(3 << FAN_CTRL_MODE(nr));
-
- switch (val) {
- case 0: /* Full speed */
- fanmode |= (3 << FAN_CTRL_MODE(nr));
- data->pwm[nr] = 255;
- f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
- data->pwm[nr]);
- break;
- case 1: /* PWM */
- fanmode |= (3 << FAN_CTRL_MODE(nr));
- break;
- case 2: /* AUTOMATIC*/
- fanmode |= (2 << FAN_CTRL_MODE(nr));
- break;
- case 3: /* fan speed */
- break;
+ if (data->kind == f75387) {
+ /* clear each fanX_mode bit before setting them properly */
+ fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr));
+ fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr));
+ switch (val) {
+ case 0: /* full speed */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ data->pwm[nr] = 255;
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+ break;
+ case 1: /* PWM */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
+ case 2: /* AUTOMATIC*/
+ fanmode |= (1 << F75387_FAN_DUTY_MODE(nr));
+ break;
+ case 3: /* fan speed */
+ fanmode |= (1 << F75387_FAN_MANU_MODE(nr));
+ break;
+ }
+ } else {
+ /* clear each fanX_mode bit before setting them properly */
+ fanmode &= ~(3 << FAN_CTRL_MODE(nr));
+ switch (val) {
+ case 0: /* full speed */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ data->pwm[nr] = 255;
+ f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
+ data->pwm[nr]);
+ break;
+ case 1: /* PWM */
+ fanmode |= (3 << FAN_CTRL_MODE(nr));
+ break;
+ case 2: /* AUTOMATIC*/
+ fanmode |= (2 << FAN_CTRL_MODE(nr));
+ break;
+ case 3: /* fan speed */
+ break;
+ }
}
+
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
return 0;
@@ -364,6 +409,7 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
unsigned long val;
int err;
u8 conf;
+ char reg, ctrl;
err = kstrtoul(buf, 10, &val);
if (err < 0)
@@ -376,14 +422,23 @@ static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
if (data->kind == f75373 && val == 0)
return -EINVAL;
+ /* take care for different registers */
+ if (data->kind == f75387) {
+ reg = F75375_REG_FAN_TIMER;
+ ctrl = F75387_FAN_CTRL_LINEAR(nr);
+ } else {
+ reg = F75375_REG_CONFIG1;
+ ctrl = F75375_FAN_CTRL_LINEAR(nr);
+ }
+
mutex_lock(&data->update_lock);
- conf = f75375_read8(client, F75375_REG_CONFIG1);
- conf &= ~(1 << FAN_CTRL_LINEAR(nr));
+ conf = f75375_read8(client, reg);
+ conf &= ~(1 << ctrl);
if (val == 0)
- conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
+ conf |= (1 << ctrl);
- f75375_write8(client, F75375_REG_CONFIG1, conf);
+ f75375_write8(client, reg, conf);
data->pwm_mode[nr] = val;
mutex_unlock(&data->update_lock);
return count;
@@ -475,13 +530,14 @@ static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
}
#define TEMP_FROM_REG(val) ((val) * 1000)
#define TEMP_TO_REG(val) ((val) / 1000)
+#define TEMP11_FROM_REG(reg) ((reg) / 32 * 125)
-static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+static ssize_t show_temp11(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
- return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
+ return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
@@ -577,12 +633,12 @@ static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 3);
static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 3);
-static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 0);
-static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
@@ -664,18 +720,38 @@ static void f75375_init(struct i2c_client *client, struct f75375_data *data,
conf = f75375_read8(client, F75375_REG_CONFIG1);
mode = f75375_read8(client, F75375_REG_FAN_TIMER);
for (nr = 0; nr < 2; nr++) {
- if (!(conf & (1 << FAN_CTRL_LINEAR(nr))))
- data->pwm_mode[nr] = 1;
- switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
- case 0: /* speed */
- data->pwm_enable[nr] = 3;
- break;
- case 1: /* automatic */
- data->pwm_enable[nr] = 2;
- break;
- default: /* manual */
- data->pwm_enable[nr] = 1;
- break;
+ if (data->kind == f75387) {
+ bool manu, duty;
+
+ if (!(conf & (1 << F75387_FAN_CTRL_LINEAR(nr))))
+ data->pwm_mode[nr] = 1;
+
+ manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1);
+ duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1);
+ if (manu && duty)
+ /* speed */
+ data->pwm_enable[nr] = 3;
+ else if (!manu && duty)
+ /* automatic */
+ data->pwm_enable[nr] = 2;
+ else
+ /* manual */
+ data->pwm_enable[nr] = 1;
+ } else {
+ if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr))))
+ data->pwm_mode[nr] = 1;
+
+ switch ((mode >> FAN_CTRL_MODE(nr)) & 3) {
+ case 0: /* speed */
+ data->pwm_enable[nr] = 3;
+ break;
+ case 1: /* automatic */
+ data->pwm_enable[nr] = 2;
+ break;
+ default: /* manual */
+ data->pwm_enable[nr] = 1;
+ break;
+ }
}
}
return;
@@ -763,10 +839,15 @@ static int f75375_detect(struct i2c_client *client,
vendid = f75375_read16(client, F75375_REG_VENDOR);
chipid = f75375_read16(client, F75375_CHIP_ID);
- if (chipid == 0x0306 && vendid == 0x1934)
+ if (vendid != 0x1934)
+ return -ENODEV;
+
+ if (chipid == 0x0306)
name = "f75375";
- else if (chipid == 0x0204 && vendid == 0x1934)
+ else if (chipid == 0x0204)
name = "f75373";
+ else if (chipid == 0x0410)
+ name = "f75387";
else
return -ENODEV;
@@ -789,7 +870,7 @@ static void __exit sensors_f75375_exit(void)
MODULE_AUTHOR("Riku Voipio");
MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
+MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver");
module_init(sensors_f75375_init);
module_exit(sensors_f75375_exit);