summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2020-03-08 10:32:23 -0500
committerLinus Torvalds <torvalds@linux-foundation.org>2020-03-08 10:32:23 -0500
commitfd3f6cc9806c2f10b886f3ad78c9e192fb1bffd9 (patch)
tree0b7b022a18fc15416233dda9ffadb92d03f670e8 /drivers
parent61a09258f2e5b48ad0605131cae9a33ce4d01a9d (diff)
parent19f3c1e98bd1704fe22e5f8105c0677a1332cdef (diff)
Merge tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH: "Here are some small USB and PHY driver fixes for reported issues for 5.6-rc5. Included in here are: - phy driver fixes - new USB quirks - USB cdns3 gadget driver fixes - USB hub core fixes All of these have been in linux-next with no reported issues" * tag 'usb-5.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: dwc3: gadget: Update chain bit correctly when using sg list usb: core: port: do error out if usb_autopm_get_interface() fails usb: core: hub: do error out if usb_autopm_get_interface() fails usb: core: hub: fix unhandled return by employing a void function usb: storage: Add quirk for Samsung Fit flash usb: quirks: add NO_LPM quirk for Logitech Screen Share usb: usb251xb: fix regulator probe and error handling phy: allwinner: Fix GENMASK misuse usb: cdns3: gadget: toggle cycle bit before reset endpoint usb: cdns3: gadget: link trb should point to next request phy: mapphone-mdm6600: Fix timeouts by adding wake-up handling phy: brcm-sata: Correct MDIO operations for 40nm platforms phy: ti: gmii-sel: do not fail in case of gmii phy: ti: gmii-sel: fix set of copy-paste errors phy: core: Fix phy_get() to not return error on link creation failure phy: mapphone-mdm6600: Fix write timeouts with shorter GPIO toggle interval
Diffstat (limited to 'drivers')
-rw-r--r--drivers/phy/allwinner/phy-sun50i-usb3.c2
-rw-r--r--drivers/phy/broadcom/phy-brcm-sata.c148
-rw-r--r--drivers/phy/motorola/phy-mapphone-mdm6600.c27
-rw-r--r--drivers/phy/phy-core.c18
-rw-r--r--drivers/phy/ti/phy-gmii-sel.c10
-rw-r--r--drivers/usb/cdns3/gadget.c19
-rw-r--r--drivers/usb/core/hub.c8
-rw-r--r--drivers/usb/core/port.c10
-rw-r--r--drivers/usb/core/quirks.c3
-rw-r--r--drivers/usb/dwc3/gadget.c9
-rw-r--r--drivers/usb/misc/usb251xb.c20
-rw-r--r--drivers/usb/storage/unusual_devs.h6
12 files changed, 163 insertions, 117 deletions
diff --git a/drivers/phy/allwinner/phy-sun50i-usb3.c b/drivers/phy/allwinner/phy-sun50i-usb3.c
index 1169f3e83a6f..b1c04f71a31d 100644
--- a/drivers/phy/allwinner/phy-sun50i-usb3.c
+++ b/drivers/phy/allwinner/phy-sun50i-usb3.c
@@ -49,7 +49,7 @@
#define SUNXI_LOS_BIAS(n) ((n) << 3)
#define SUNXI_LOS_BIAS_MASK GENMASK(5, 3)
#define SUNXI_TXVBOOSTLVL(n) ((n) << 0)
-#define SUNXI_TXVBOOSTLVL_MASK GENMASK(0, 2)
+#define SUNXI_TXVBOOSTLVL_MASK GENMASK(2, 0)
struct sun50i_usb3_phy {
struct phy *phy;
diff --git a/drivers/phy/broadcom/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c
index 4710cfcc3037..18251f232172 100644
--- a/drivers/phy/broadcom/phy-brcm-sata.c
+++ b/drivers/phy/broadcom/phy-brcm-sata.c
@@ -186,29 +186,6 @@ enum sata_phy_ctrl_regs {
PHY_CTRL_1_RESET = BIT(0),
};
-static inline void __iomem *brcm_sata_pcb_base(struct brcm_sata_port *port)
-{
- struct brcm_sata_phy *priv = port->phy_priv;
- u32 size = 0;
-
- switch (priv->version) {
- case BRCM_SATA_PHY_STB_16NM:
- case BRCM_SATA_PHY_STB_28NM:
- case BRCM_SATA_PHY_IPROC_NS2:
- case BRCM_SATA_PHY_DSL_28NM:
- size = SATA_PCB_REG_28NM_SPACE_SIZE;
- break;
- case BRCM_SATA_PHY_STB_40NM:
- size = SATA_PCB_REG_40NM_SPACE_SIZE;
- break;
- default:
- dev_err(priv->dev, "invalid phy version\n");
- break;
- }
-
- return priv->phy_base + (port->portnum * size);
-}
-
static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
{
struct brcm_sata_phy *priv = port->phy_priv;
@@ -226,19 +203,34 @@ static inline void __iomem *brcm_sata_ctrl_base(struct brcm_sata_port *port)
return priv->ctrl_base + (port->portnum * size);
}
-static void brcm_sata_phy_wr(void __iomem *pcb_base, u32 bank,
+static void brcm_sata_phy_wr(struct brcm_sata_port *port, u32 bank,
u32 ofs, u32 msk, u32 value)
{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ void __iomem *pcb_base = priv->phy_base;
u32 tmp;
+ if (priv->version == BRCM_SATA_PHY_STB_40NM)
+ bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
+ else
+ pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
+
writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
tmp = readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
tmp = (tmp & msk) | value;
writel(tmp, pcb_base + SATA_PCB_REG_OFFSET(ofs));
}
-static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
+static u32 brcm_sata_phy_rd(struct brcm_sata_port *port, u32 bank, u32 ofs)
{
+ struct brcm_sata_phy *priv = port->phy_priv;
+ void __iomem *pcb_base = priv->phy_base;
+
+ if (priv->version == BRCM_SATA_PHY_STB_40NM)
+ bank += (port->portnum * SATA_PCB_REG_40NM_SPACE_SIZE);
+ else
+ pcb_base += (port->portnum * SATA_PCB_REG_28NM_SPACE_SIZE);
+
writel(bank, pcb_base + SATA_PCB_BANK_OFFSET);
return readl(pcb_base + SATA_PCB_REG_OFFSET(ofs));
}
@@ -250,16 +242,15 @@ static u32 brcm_sata_phy_rd(void __iomem *pcb_base, u32 bank, u32 ofs)
static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_pcb_base(port);
struct brcm_sata_phy *priv = port->phy_priv;
u32 tmp;
/* override the TX spread spectrum setting */
tmp = TXPMD_CONTROL1_TX_SSC_EN_FRC_VAL | TXPMD_CONTROL1_TX_SSC_EN_FRC;
- brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
+ brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_CONTROL1, ~tmp, tmp);
/* set fixed min freq */
- brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
+ brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL2,
~TXPMD_TX_FREQ_CTRL_CONTROL2_FMIN_MASK,
STB_FMIN_VAL_DEFAULT);
@@ -271,7 +262,7 @@ static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
tmp = STB_FMAX_VAL_DEFAULT;
}
- brcm_sata_phy_wr(base, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
+ brcm_sata_phy_wr(port, TXPMD_REG_BANK, TXPMD_TX_FREQ_CTRL_CONTROL3,
~TXPMD_TX_FREQ_CTRL_CONTROL3_FMAX_MASK, tmp);
}
@@ -280,7 +271,6 @@ static void brcm_stb_sata_ssc_init(struct brcm_sata_port *port)
static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_pcb_base(port);
u32 tmp = 0, reg = 0;
switch (port->rxaeq_mode) {
@@ -301,8 +291,8 @@ static int brcm_stb_sata_rxaeq_init(struct brcm_sata_port *port)
break;
}
- brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, reg, ~tmp, tmp);
- brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, reg, ~tmp, tmp);
+ brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, reg, ~tmp, tmp);
+ brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, reg, ~tmp, tmp);
return 0;
}
@@ -316,18 +306,17 @@ static int brcm_stb_sata_init(struct brcm_sata_port *port)
static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_pcb_base(port);
u32 tmp, value;
/* Reduce CP tail current to 1/16th of its default value */
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0x141);
/* Turn off CP tail current boost */
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL8, 0, 0xc006);
/* Set a specific AEQ equalizer value */
tmp = AEQ_FRC_EQ_FORCE_VAL | AEQ_FRC_EQ_FORCE;
- brcm_sata_phy_wr(base, AEQRX_REG_BANK_0, AEQ_FRC_EQ,
+ brcm_sata_phy_wr(port, AEQRX_REG_BANK_0, AEQ_FRC_EQ,
~(tmp | AEQ_RFZ_FRC_VAL |
AEQ_FRC_EQ_VAL_MASK << AEQ_FRC_EQ_VAL_SHIFT),
tmp | 32 << AEQ_FRC_EQ_VAL_SHIFT);
@@ -337,7 +326,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
value = 0x52;
else
value = 0;
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CONTROL1,
~RXPMD_RX_PPM_VAL_MASK, value);
/* Set proportional loop bandwith Gen1/2/3 */
@@ -352,7 +341,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
value = 1 << RXPMD_G1_CDR_PROP_BW_SHIFT |
1 << RXPMD_G2_CDR_PROP_BW_SHIFT |
1 << RXPMD_G3_CDR_PROB_BW_SHIFT;
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_PROP_BW, ~tmp,
value);
/* Set CDR integral loop acquisition bandwidth for Gen1/2/3 */
@@ -365,7 +354,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
1 << RXPMD_G3_CDR_ACQ_INT_BW_SHIFT;
else
value = 0;
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_ACQ_INTEG_BW,
~tmp, value);
/* Set CDR integral loop locking bandwidth to 1 for Gen 1/2/3 */
@@ -378,7 +367,7 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
1 << RXPMD_G3_CDR_LOCK_INT_BW_SHIFT;
else
value = 0;
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_CDR_CDR_LOCK_INTEG_BW,
~tmp, value);
/* Set no guard band and clamp CDR */
@@ -387,11 +376,11 @@ static int brcm_stb_sata_16nm_ssc_init(struct brcm_sata_port *port)
value = 0x51;
else
value = 0;
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
~tmp, RXPMD_MON_CORRECT_EN | value);
/* Turn on/off SSC */
- brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN,
+ brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL5, ~TX_ACTRL5_SSC_EN,
port->ssc_en ? TX_ACTRL5_SSC_EN : 0);
return 0;
@@ -411,7 +400,6 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
{
int try;
unsigned int val;
- void __iomem *base = brcm_sata_pcb_base(port);
void __iomem *ctrl_base = brcm_sata_ctrl_base(port);
struct device *dev = port->phy_priv->dev;
@@ -421,24 +409,24 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
val |= (0x4 << OOB_CTRL1_BURST_MIN_SHIFT);
val |= (0x9 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
val |= (0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
- brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+ brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
val = 0x0;
val |= (0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
val |= (0x2 << OOB_CTRL2_BURST_CNT_SHIFT);
val |= (0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
- brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+ brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
/* Configure PHY PLL register bank 1 */
val = NS2_PLL1_ACTRL2_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
val = NS2_PLL1_ACTRL3_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
val = NS2_PLL1_ACTRL4_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
/* Configure PHY BLOCK0 register bank */
/* Set oob_clk_sel to refclk/2 */
- brcm_sata_phy_wr(base, BLOCK0_REG_BANK, BLOCK0_SPARE,
+ brcm_sata_phy_wr(port, BLOCK0_REG_BANK, BLOCK0_SPARE,
~BLOCK0_SPARE_OOB_CLK_SEL_MASK,
BLOCK0_SPARE_OOB_CLK_SEL_REFBY2);
@@ -451,7 +439,7 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
/* Wait for PHY PLL lock by polling pll_lock bit */
try = 50;
while (try) {
- val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
@@ -471,9 +459,7 @@ static int brcm_ns2_sata_init(struct brcm_sata_port *port)
static int brcm_nsp_sata_init(struct brcm_sata_port *port)
{
- struct brcm_sata_phy *priv = port->phy_priv;
struct device *dev = port->phy_priv->dev;
- void __iomem *base = priv->phy_base;
unsigned int oob_bank;
unsigned int val, try;
@@ -490,36 +476,36 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port)
val |= (0x06 << OOB_CTRL1_BURST_MIN_SHIFT);
val |= (0x0f << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT);
val |= (0x06 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT);
- brcm_sata_phy_wr(base, oob_bank, OOB_CTRL1, 0x0, val);
+ brcm_sata_phy_wr(port, oob_bank, OOB_CTRL1, 0x0, val);
val = 0x0;
val |= (0x2e << OOB_CTRL2_RESET_IDLE_MAX_SHIFT);
val |= (0x02 << OOB_CTRL2_BURST_CNT_SHIFT);
val |= (0x16 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT);
- brcm_sata_phy_wr(base, oob_bank, OOB_CTRL2, 0x0, val);
+ brcm_sata_phy_wr(port, oob_bank, OOB_CTRL2, 0x0, val);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL2,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL2,
~(PLL_ACTRL2_SELDIV_MASK << PLL_ACTRL2_SELDIV_SHIFT),
0x0c << PLL_ACTRL2_SELDIV_SHIFT);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CONTROL,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CONTROL,
0xff0, 0x4f0);
val = PLLCONTROL_0_FREQ_DET_RESTART | PLLCONTROL_0_FREQ_MONITOR;
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
val = PLLCONTROL_0_SEQ_START;
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, 0);
mdelay(10);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
~val, val);
/* Wait for pll_seq_done bit */
try = 50;
while (--try) {
- val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
@@ -546,27 +532,25 @@ static int brcm_nsp_sata_init(struct brcm_sata_port *port)
static int brcm_sr_sata_init(struct brcm_sata_port *port)
{
- struct brcm_sata_phy *priv = port->phy_priv;
struct device *dev = port->phy_priv->dev;
- void __iomem *base = priv->phy_base;
unsigned int val, try;
/* Configure PHY PLL register bank 1 */
val = SR_PLL1_ACTRL2_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL2, 0x0, val);
val = SR_PLL1_ACTRL3_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL3, 0x0, val);
val = SR_PLL1_ACTRL4_MAGIC;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL4, 0x0, val);
/* Configure PHY PLL register bank 0 */
val = SR_PLL0_ACTRL6_MAGIC;
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_ACTRL6, 0x0, val);
/* Wait for PHY PLL lock by polling pll_lock bit */
try = 50;
do {
- val = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ val = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (val & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
@@ -581,7 +565,7 @@ static int brcm_sr_sata_init(struct brcm_sata_port *port)
}
/* Invert Tx polarity */
- brcm_sata_phy_wr(base, TX_REG_BANK, TX_ACTRL0,
+ brcm_sata_phy_wr(port, TX_REG_BANK, TX_ACTRL0,
~TX_ACTRL0_TXPOL_FLIP, TX_ACTRL0_TXPOL_FLIP);
/* Configure OOB control to handle 100MHz reference clock */
@@ -589,52 +573,51 @@ static int brcm_sr_sata_init(struct brcm_sata_port *port)
(0x4 << OOB_CTRL1_BURST_MIN_SHIFT) |
(0x8 << OOB_CTRL1_WAKE_IDLE_MAX_SHIFT) |
(0x3 << OOB_CTRL1_WAKE_IDLE_MIN_SHIFT));
- brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
+ brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL1, 0x0, val);
val = ((0x1b << OOB_CTRL2_RESET_IDLE_MAX_SHIFT) |
(0x2 << OOB_CTRL2_BURST_CNT_SHIFT) |
(0x9 << OOB_CTRL2_RESET_IDLE_MIN_SHIFT));
- brcm_sata_phy_wr(base, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
+ brcm_sata_phy_wr(port, OOB_REG_BANK, OOB_CTRL2, 0x0, val);
return 0;
}
static int brcm_dsl_sata_init(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_pcb_base(port);
struct device *dev = port->phy_priv->dev;
unsigned int try;
u32 tmp;
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL7, 0, 0x873);
- brcm_sata_phy_wr(base, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000);
+ brcm_sata_phy_wr(port, PLL1_REG_BANK, PLL1_ACTRL6, 0, 0xc000);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
0, 0x3089);
usleep_range(1000, 2000);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_REG_BANK_0_PLLCONTROL_0,
0, 0x3088);
usleep_range(1000, 2000);
- brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0,
+ brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL0_CTRL0,
0, 0x3000);
- brcm_sata_phy_wr(base, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0,
+ brcm_sata_phy_wr(port, AEQRX_REG_BANK_1, AEQRX_SLCAL1_CTRL0,
0, 0x3000);
usleep_range(1000, 2000);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32);
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_CAP_CHARGE_TIME, 0, 0x32);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa);
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_VCO_CAL_THRESH, 0, 0xa);
- brcm_sata_phy_wr(base, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64);
+ brcm_sata_phy_wr(port, PLL_REG_BANK_0, PLL_FREQ_DET_TIME, 0, 0x64);
usleep_range(1000, 2000);
/* Acquire PLL lock */
try = 50;
while (try) {
- tmp = brcm_sata_phy_rd(base, BLOCK0_REG_BANK,
+ tmp = brcm_sata_phy_rd(port, BLOCK0_REG_BANK,
BLOCK0_XGXSSTATUS);
if (tmp & BLOCK0_XGXSSTATUS_PLL_LOCK)
break;
@@ -687,10 +670,9 @@ static int brcm_sata_phy_init(struct phy *phy)
static void brcm_stb_sata_calibrate(struct brcm_sata_port *port)
{
- void __iomem *base = brcm_sata_pcb_base(port);
u32 tmp = BIT(8);
- brcm_sata_phy_wr(base, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
+ brcm_sata_phy_wr(port, RXPMD_REG_BANK, RXPMD_RX_FREQ_MON_CONTROL1,
~tmp, tmp);
}
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index f20524f0c21d..94a34cf75eb3 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -20,6 +20,7 @@
#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */
#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */
+#define PHY_MDM6600_WAKE_KICK_MS 600 /* time on after GPIO toggle */
#define MDM6600_MODEM_IDLE_DELAY_MS 1000 /* modem after USB suspend */
#define MDM6600_MODEM_WAKE_DELAY_MS 200 /* modem response after idle */
@@ -243,10 +244,24 @@ static irqreturn_t phy_mdm6600_wakeirq_thread(int irq, void *data)
{
struct phy_mdm6600 *ddata = data;
struct gpio_desc *mode_gpio1;
+ int error, wakeup;
mode_gpio1 = ddata->mode_gpios->desc[PHY_MDM6600_MODE1];
- dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n",
- gpiod_get_value(mode_gpio1));
+ wakeup = gpiod_get_value(mode_gpio1);
+ if (!wakeup)
+ return IRQ_NONE;
+
+ dev_dbg(ddata->dev, "OOB wake on mode_gpio1: %i\n", wakeup);
+ error = pm_runtime_get_sync(ddata->dev);
+ if (error < 0) {
+ pm_runtime_put_noidle(ddata->dev);
+
+ return IRQ_NONE;
+ }
+
+ /* Just wake-up and kick the autosuspend timer */
+ pm_runtime_mark_last_busy(ddata->dev);
+ pm_runtime_put_autosuspend(ddata->dev);
return IRQ_HANDLED;
}
@@ -496,8 +511,14 @@ static void phy_mdm6600_modem_wake(struct work_struct *work)
ddata = container_of(work, struct phy_mdm6600, modem_wake_work.work);
phy_mdm6600_wake_modem(ddata);
+
+ /*
+ * The modem does not always stay awake 1.2 seconds after toggling
+ * the wake GPIO, and sometimes it idles after about some 600 ms
+ * making writes time out.
+ */
schedule_delayed_work(&ddata->modem_wake_work,
- msecs_to_jiffies(MDM6600_MODEM_IDLE_DELAY_MS));
+ msecs_to_jiffies(PHY_MDM6600_WAKE_KICK_MS));
}
static int __maybe_unused phy_mdm6600_runtime_suspend(struct device *dev)
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index cd5a6c95dbdc..a27b8d578d7f 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -688,11 +688,9 @@ struct phy *phy_get(struct device *dev, const char *string)
get_device(&phy->dev);
link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS);
- if (!link) {
- dev_err(dev, "failed to create device link to %s\n",
+ if (!link)
+ dev_dbg(dev, "failed to create device link to %s\n",
dev_name(phy->dev.parent));
- return ERR_PTR(-EINVAL);
- }
return phy;
}
@@ -803,11 +801,9 @@ struct phy *devm_of_phy_get(struct device *dev, struct device_node *np,
}
link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS);
- if (!link) {
- dev_err(dev, "failed to create device link to %s\n",
+ if (!link)
+ dev_dbg(dev, "failed to create device link to %s\n",
dev_name(phy->dev.parent));
- return ERR_PTR(-EINVAL);
- }
return phy;
}
@@ -852,11 +848,9 @@ struct phy *devm_of_phy_get_by_index(struct device *dev, struct device_node *np,
devres_add(dev, ptr);
link = device_link_add(dev, &phy->dev, DL_FLAG_STATELESS);
- if (!link) {
- dev_err(dev, "failed to create device link to %s\n",
+ if (!link)
+ dev_dbg(dev, "failed to create device link to %s\n",
dev_name(phy->dev.parent));
- return ERR_PTR(-EINVAL);
- }
return phy;
}
diff --git a/drivers/phy/ti/phy-gmii-sel.c b/drivers/phy/ti/phy-gmii-sel.c
index a28bd15297f5..1c536fc03c83 100644
--- a/drivers/phy/ti/phy-gmii-sel.c
+++ b/drivers/phy/ti/phy-gmii-sel.c
@@ -80,20 +80,20 @@ static int phy_gmii_sel_mode(struct phy *phy, enum phy_mode mode, int submode)
break;
case PHY_INTERFACE_MODE_MII:
- mode = AM33XX_GMII_SEL_MODE_MII;
+ case PHY_INTERFACE_MODE_GMII:
+ gmii_sel_mode = AM33XX_GMII_SEL_MODE_MII;
break;
default:
- dev_warn(dev,
- "port%u: unsupported mode: \"%s\". Defaulting to MII.\n",
- if_phy->id, phy_modes(rgmii_id));
+ dev_warn(dev, "port%u: unsupported mode: \"%s\"\n",
+ if_phy->id, phy_modes(submode));
return -EINVAL;
}
if_phy->phy_if_mode = submode;
dev_dbg(dev, "%s id:%u mode:%u rgmii_id:%d rmii_clk_ext:%d\n",
- __func__, if_phy->id, mode, rgmii_id,
+ __func__, if_phy->id, submode, rgmii_id,
if_phy->rmii_clock_external);
regfield = if_phy->fields[PHY_GMII_SEL_PORT_MODE];
diff --git a/drivers/usb/cdns3/gadget.c b/drivers/usb/cdns3/gadget.c
index 736b0c6e27fe..3574dbb09366 100644
--- a/drivers/usb/cdns3/gadget.c
+++ b/drivers/usb/cdns3/gadget.c
@@ -2550,7 +2550,7 @@ found:
/* Update ring only if removed request is on pending_req_list list */
if (req_on_hw_ring) {
link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
- (priv_req->start_trb * TRB_SIZE));
+ ((priv_req->end_trb + 1) * TRB_SIZE));
link_trb->control = (link_trb->control & TRB_CYCLE) |
TRB_TYPE(TRB_LINK) | TRB_CHAIN;
@@ -2595,11 +2595,21 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
{
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
struct usb_request *request;
+ struct cdns3_request *priv_req;
+ struct cdns3_trb *trb = NULL;
int ret;
int val;
trace_cdns3_halt(priv_ep, 0, 0);
+ request = cdns3_next_request(&priv_ep->pending_req_list);
+ if (request) {
+ priv_req = to_cdns3_request(request);
+ trb = priv_req->trb;
+ if (trb)
+ trb->control = trb->control ^ TRB_CYCLE;
+ }
+
writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
/* wait for EPRST cleared */
@@ -2610,10 +2620,11 @@ int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
- request = cdns3_next_request(&priv_ep->pending_req_list);
-
- if (request)
+ if (request) {
+ if (trb)
+ trb->control = trb->control ^ TRB_CYCLE;
cdns3_rearm_transfer(priv_ep, 1);
+ }
cdns3_start_all_request(priv_dev, priv_ep);
return ret;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 1d212f82c69b..54cd8ef795ec 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -988,13 +988,17 @@ int usb_remove_device(struct usb_device *udev)
{
struct usb_hub *hub;
struct usb_interface *intf;
+ int ret;
if (!udev->parent) /* Can't remove a root hub */
return -EINVAL;
hub = usb_hub_to_struct_hub(udev->parent);
intf = to_usb_interface(hub->intfdev);
- usb_autopm_get_interface(intf);
+ ret = usb_autopm_get_interface(intf);
+ if (ret < 0)
+ return ret;
+
set_bit(udev->portnum, hub->removed_bits);
hub_port_logical_disconnect(hub, udev->portnum);
usb_autopm_put_interface(intf);
@@ -1866,7 +1870,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id)
if (id->driver_info & HUB_QUIRK_DISABLE_AUTOSUSPEND) {
hub->quirk_disable_autosuspend = 1;
- usb_autopm_get_interface(intf);
+ usb_autopm_get_interface_no_resume(intf);
}
if (hub_configure(hub, &desc->endpoint[0].desc) >= 0)
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index bbbb35fa639f..235a7c645503 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -213,7 +213,10 @@ static int usb_port_runtime_resume(struct device *dev)
if (!port_dev->is_superspeed && peer)
pm_runtime_get_sync(&peer->dev);
- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, true);
msleep(hub_power_on_good_delay(hub));
if (udev && !retval) {
@@ -266,7 +269,10 @@ static int usb_port_runtime_suspend(struct device *dev)
if (usb_port_block_power_off)
return -EBUSY;
- usb_autopm_get_interface(intf);
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ return retval;
+
retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
if (!port_dev->is_superspeed)
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2b24336a72e5..2dac3e7cdd97 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -231,6 +231,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* Logitech PTZ Pro Camera */
{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
+ /* Logitech Screen Share */
+ { USB_DEVICE(0x046d, 0x086c), .driver_info = USB_QUIRK_NO_LPM },
+
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 1b7d2f9cb673..1e00bf2d65a2 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1071,7 +1071,14 @@ static void dwc3_prepare_one_trb_sg(struct dwc3_ep *dep,
unsigned int rem = length % maxp;
unsigned chain = true;
- if (sg_is_last(s))
+ /*
+ * IOMMU driver is coalescing the list of sgs which shares a
+ * page boundary into one and giving it to USB driver. With
+ * this the number of sgs mapped is not equal to the number of
+ * sgs passed. So mark the chain bit to false if it isthe last
+ * mapped sg.
+ */
+ if (i == remaining - 1)
chain = false;
if (rem && usb_endpoint_dir_out(dep->endpoint.desc) && !chain) {
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
index 10c9e7f6273e..29fe5771c21b 100644
--- a/drivers/usb/misc/usb251xb.c
+++ b/drivers/usb/misc/usb251xb.c
@@ -424,10 +424,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
return err;
}
- hub->vdd = devm_regulator_get(dev, "vdd");
- if (IS_ERR(hub->vdd))
- return PTR_ERR(hub->vdd);
-
if (of_property_read_u16_array(np, "vendor-id", &hub->vendor_id, 1))
hub->vendor_id = USB251XB_DEF_VENDOR_ID;
@@ -640,6 +636,13 @@ static int usb251xb_get_ofdata(struct usb251xb *hub,
}
#endif /* CONFIG_OF */
+static void usb251xb_regulator_disable_action(void *data)
+{
+ struct usb251xb *hub = data;
+
+ regulator_disable(hub->vdd);
+}
+
static int usb251xb_probe(struct usb251xb *hub)
{
struct device *dev = hub->dev;
@@ -676,10 +679,19 @@ static int usb251xb_probe(struct usb251xb *hub)
if (err)
return err;
+ hub->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(hub->vdd))
+ return PTR_ERR(hub->vdd);
+
err = regulator_enable(hub->vdd);
if (err)
return err;
+ err = devm_add_action_or_reset(dev,
+ usb251xb_regulator_disable_action, hub);
+ if (err)
+ return err;
+
err = usb251xb_connect(hub);
if (err) {
dev_err(dev, "Failed to connect hub (%d)\n", err);
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1cd9b6305b06..1880f3e13f57 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -1258,6 +1258,12 @@ UNUSUAL_DEV( 0x090a, 0x1200, 0x0000, 0x9999,
USB_SC_RBC, USB_PR_BULK, NULL,
0 ),
+UNUSUAL_DEV(0x090c, 0x1000, 0x1100, 0x1100,
+ "Samsung",
+ "Flash Drive FIT",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_MAX_SECTORS_64),
+
/* aeb */
UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
"Feiya",