diff options
| author | René van Dorst <opensource@vdorst.com> | 2020-03-19 14:47:56 +0100 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2020-03-19 21:10:49 -0700 |
| commit | 22259471b51925353bd7b16f864c79fdd76e425e (patch) | |
| tree | 5f2b7b65ed8fc254f25c08844892d798d9d25d0e /drivers | |
| parent | 3ac9eb4210a95cf9b374f1d48ce99d87d79d2510 (diff) | |
net: dsa: mt7530: Change the LINK bit to reflect the link status
Andrew reported:
After a number of network port link up/down changes, sometimes the switch
port gets stuck in a state where it thinks it is still transmitting packets
but the cpu port is not actually transmitting anymore. In this state you
will see a message on the console
"mtk_soc_eth 1e100000.ethernet eth0: transmit timed out" and the Tx counter
in ifconfig will be incrementing on virtual port, but not incrementing on
cpu port.
The issue is that MAC TX/RX status has no impact on the link status or
queue manager of the switch. So the queue manager just queues up packets
of a disabled port and sends out pause frames when the queue is full.
Change the LINK bit to reflect the link status.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Reported-by: Andrew Smith <andrew.smith@digi.com>
Signed-off-by: René van Dorst <opensource@vdorst.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
| -rw-r--r-- | drivers/net/dsa/mt7530.c | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 022466ca1c19..7cbd1bd4c5a6 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -566,7 +566,7 @@ mt7530_mib_reset(struct dsa_switch *ds) static void mt7530_port_set_status(struct mt7530_priv *priv, int port, int enable) { - u32 mask = PMCR_TX_EN | PMCR_RX_EN; + u32 mask = PMCR_TX_EN | PMCR_RX_EN | PMCR_FORCE_LNK; if (enable) mt7530_set(priv, MT7530_PMCR_P(port), mask); @@ -1444,7 +1444,7 @@ static void mt7530_phylink_mac_config(struct dsa_switch *ds, int port, mcr_new &= ~(PMCR_FORCE_SPEED_1000 | PMCR_FORCE_SPEED_100 | PMCR_FORCE_FDX | PMCR_TX_FC_EN | PMCR_RX_FC_EN); mcr_new |= PMCR_IFG_XMIT(1) | PMCR_MAC_MODE | PMCR_BACKOFF_EN | - PMCR_BACKPR_EN | PMCR_FORCE_MODE | PMCR_FORCE_LNK; + PMCR_BACKPR_EN | PMCR_FORCE_MODE; /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) |