summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2023-04-27 12:07:50 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2023-04-27 12:07:50 -0700
commitcec24b8b6bb841a19b5c5555b600a511a8988100 (patch)
treeb12115ba8e6e6929cea0658ee3c9dae9aad8a82d /drivers
parent556eb8b79190151506187bf0b16dda423c34d9a8 (diff)
parent2025b2ca8004c04861903d076c67a73a0ec6dfca (diff)
Merge tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc drivers updates from Greg KH: "Here is the "big" set of char/misc and other driver subsystems for 6.4-rc1. It's pretty big, but due to the removal of pcmcia drivers, almost breaks even for number of lines added vs. removed, a nice change. Included in here are: - removal of unused PCMCIA drivers (finally!) - Interconnect driver updates and additions - Lots of IIO driver updates and additions - MHI driver updates - Coresight driver updates - NVMEM driver updates, which required some OF updates - W1 driver updates and a new maintainer to manage the subsystem - FPGA driver updates - New driver subsystem, CDX, for AMD systems - lots of other small driver updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (196 commits) mcb-lpc: Reallocate memory region to avoid memory overlapping mcb-pci: Reallocate memory region to avoid memory overlapping mcb: Return actual parsed size when reading chameleon table kernel/configs: Drop Android config fragments virt: acrn: Replace obsolete memalign() with posix_memalign() spmi: Add a check for remove callback when removing a SPMI driver spmi: fix W=1 kernel-doc warnings spmi: mtk-pmif: Drop of_match_ptr for ID table spmi: pmic-arb: Convert to platform remove callback returning void spmi: mtk-pmif: Convert to platform remove callback returning void spmi: hisi-spmi-controller: Convert to platform remove callback returning void w1: gpio: remove unnecessary ENOMEM messages w1: omap-hdq: remove unnecessary ENOMEM messages w1: omap-hdq: add SPDX tag w1: omap-hdq: allow compile testing w1: matrox: remove unnecessary ENOMEM messages w1: matrox: use inline over __inline__ w1: matrox: switch from asm to linux header w1: ds2482: do not use assignment in if condition w1: ds2482: drop unnecessary header ...
Diffstat (limited to 'drivers')
-rw-r--r--drivers/Kconfig2
-rw-r--r--drivers/Makefile1
-rw-r--r--drivers/acpi/bus.c7
-rw-r--r--drivers/bus/mhi/ep/main.c4
-rw-r--r--drivers/bus/mhi/host/boot.c16
-rw-r--r--drivers/bus/mhi/host/init.c16
-rw-r--r--drivers/bus/mhi/host/main.c25
-rw-r--r--drivers/bus/mhi/host/pci_generic.c28
-rw-r--r--drivers/cdx/Kconfig19
-rw-r--r--drivers/cdx/Makefile8
-rw-r--r--drivers/cdx/cdx.c535
-rw-r--r--drivers/cdx/cdx.h62
-rw-r--r--drivers/cdx/controller/Kconfig31
-rw-r--r--drivers/cdx/controller/Makefile9
-rw-r--r--drivers/cdx/controller/bitfield.h90
-rw-r--r--drivers/cdx/controller/cdx_controller.c230
-rw-r--r--drivers/cdx/controller/cdx_controller.h30
-rw-r--r--drivers/cdx/controller/cdx_rpmsg.c202
-rw-r--r--drivers/cdx/controller/mc_cdx_pcol.h590
-rw-r--r--drivers/cdx/controller/mcdi.c903
-rw-r--r--drivers/cdx/controller/mcdi.h248
-rw-r--r--drivers/cdx/controller/mcdi_functions.c139
-rw-r--r--drivers/cdx/controller/mcdi_functions.h61
-rw-r--r--drivers/char/Kconfig2
-rw-r--r--drivers/char/Makefile1
-rw-r--r--drivers/char/pcmcia/Kconfig68
-rw-r--r--drivers/char/pcmcia/Makefile11
-rw-r--r--drivers/char/pcmcia/cm4000_cs.c1912
-rw-r--r--drivers/char/pcmcia/cm4040_cs.c684
-rw-r--r--drivers/char/pcmcia/cm4040_cs.h48
-rw-r--r--drivers/char/pcmcia/scr24x_cs.c359
-rw-r--r--drivers/char/pcmcia/synclink_cs.c4290
-rw-r--r--drivers/firmware/dmi-sysfs.c4
-rw-r--r--drivers/firmware/edd.c2
-rw-r--r--drivers/firmware/stratix10-svc.c4
-rw-r--r--drivers/firmware/xilinx/zynqmp.c33
-rw-r--r--drivers/fpga/fpga-bridge.c2
-rw-r--r--drivers/fpga/zynqmp-fpga.c21
-rw-r--r--drivers/gpu/drm/drm_mipi_dsi.c2
-rw-r--r--drivers/hsi/hsi_core.c2
-rw-r--r--drivers/hwtracing/coresight/coresight-etm-perf.c1
-rw-r--r--drivers/i2c/busses/i2c-powermac.c2
-rw-r--r--drivers/i2c/i2c-core-of.c2
-rw-r--r--drivers/iio/Kconfig3
-rw-r--r--drivers/iio/Makefile1
-rw-r--r--drivers/iio/accel/bma400_core.c2
-rw-r--r--drivers/iio/accel/kionix-kx022a.c3
-rw-r--r--drivers/iio/accel/mma8452.c2
-rw-r--r--drivers/iio/accel/msa311.c2
-rw-r--r--drivers/iio/accel/st_accel.h1
-rw-r--r--drivers/iio/accel/st_accel_core.c1
-rw-r--r--drivers/iio/accel/st_accel_i2c.c5
-rw-r--r--drivers/iio/accel/st_accel_spi.c5
-rw-r--r--drivers/iio/adc/Kconfig10
-rw-r--r--drivers/iio/adc/Makefile1
-rw-r--r--drivers/iio/adc/ad7606.c2
-rw-r--r--drivers/iio/adc/at91-sama5d2_adc.c8
-rw-r--r--drivers/iio/adc/axp20x_adc.c77
-rw-r--r--drivers/iio/adc/max11410.c2
-rw-r--r--drivers/iio/adc/meson_saradc.c21
-rw-r--r--drivers/iio/adc/palmas_gpadc.c615
-rw-r--r--drivers/iio/adc/qcom-pm8xxx-xoadc.c2
-rw-r--r--drivers/iio/adc/rcar-gyroadc.c2
-rw-r--r--drivers/iio/adc/stm32-adc.c6
-rw-r--r--drivers/iio/adc/ti-ads1100.c445
-rw-r--r--drivers/iio/addac/Kconfig2
-rw-r--r--drivers/iio/addac/ad74413r.c44
-rw-r--r--drivers/iio/addac/stx104.c462
-rw-r--r--drivers/iio/chemical/sps30_i2c.c6
-rw-r--r--drivers/iio/common/st_sensors/st_sensors_trigger.c4
-rw-r--r--drivers/iio/dac/Kconfig1
-rw-r--r--drivers/iio/dac/ad5592r-base.c5
-rw-r--r--drivers/iio/dac/cio-dac.c68
-rw-r--r--drivers/iio/dac/max5522.c2
-rw-r--r--drivers/iio/frequency/admv1013.c21
-rw-r--r--drivers/iio/gyro/fxas21002c_core.c2
-rw-r--r--drivers/iio/gyro/mpu3050-core.c2
-rw-r--r--drivers/iio/humidity/hts221_buffer.c2
-rw-r--r--drivers/iio/imu/adis16475.c6
-rw-r--r--drivers/iio/imu/st_lsm6dsx/Kconfig4
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h15
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c59
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c99
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c21
-rw-r--r--drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c5
-rw-r--r--drivers/iio/industrialio-gts-helper.c1077
-rw-r--r--drivers/iio/industrialio-trigger.c17
-rw-r--r--drivers/iio/light/Kconfig14
-rw-r--r--drivers/iio/light/Makefile1
-rw-r--r--drivers/iio/light/acpi-als.c2
-rw-r--r--drivers/iio/light/max44009.c13
-rw-r--r--drivers/iio/light/rohm-bu27034.c1497
-rw-r--r--drivers/iio/light/rpr0521.c2
-rw-r--r--drivers/iio/light/st_uvis25_core.c2
-rw-r--r--drivers/iio/light/vcnl4000.c2
-rw-r--r--drivers/iio/light/vcnl4035.c2
-rw-r--r--drivers/iio/potentiostat/lmp91000.c2
-rw-r--r--drivers/iio/pressure/Kconfig6
-rw-r--r--drivers/iio/pressure/bmp280-core.c765
-rw-r--r--drivers/iio/pressure/bmp280-i2c.c45
-rw-r--r--drivers/iio/pressure/bmp280-regmap.c60
-rw-r--r--drivers/iio/pressure/bmp280-spi.c47
-rw-r--r--drivers/iio/pressure/bmp280.h273
-rw-r--r--drivers/iio/pressure/zpa2326.c2
-rw-r--r--drivers/iio/proximity/as3935.c2
-rw-r--r--drivers/iio/proximity/sx9324.c96
-rw-r--r--drivers/iio/proximity/sx9360.c32
-rw-r--r--drivers/iio/proximity/sx9500.c4
-rw-r--r--drivers/iio/proximity/sx_common.c21
-rw-r--r--drivers/iio/proximity/sx_common.h6
-rw-r--r--drivers/iio/temperature/tmp117.c80
-rw-r--r--drivers/iio/trigger/iio-trig-loop.c2
-rw-r--r--drivers/interconnect/core.c81
-rw-r--r--drivers/interconnect/qcom/Kconfig2
-rw-r--r--drivers/interconnect/qcom/icc-rpm.c38
-rw-r--r--drivers/interconnect/qcom/icc-rpm.h17
-rw-r--r--drivers/interconnect/qcom/msm8996.c1
-rw-r--r--drivers/interconnect/qcom/osm-l3.c7
-rw-r--r--drivers/interconnect/qcom/sc7180.h2
-rw-r--r--drivers/interconnect/qcom/sc7280.h2
-rw-r--r--drivers/interconnect/qcom/sc8180x.h2
-rw-r--r--drivers/interconnect/qcom/sdm845.h2
-rw-r--r--drivers/interconnect/qcom/sm8150.h2
-rw-r--r--drivers/interconnect/qcom/sm8250.h2
-rw-r--r--drivers/iommu/iommu.c4
-rw-r--r--drivers/mcb/mcb-lpc.c35
-rw-r--r--drivers/mcb/mcb-parse.c15
-rw-r--r--drivers/mcb/mcb-pci.c27
-rw-r--r--drivers/misc/cardreader/alcor_pci.c167
-rw-r--r--drivers/misc/genwqe/card_base.c2
-rw-r--r--drivers/misc/hpilo.c6
-rw-r--r--drivers/misc/lis3lv02d/lis3lv02d.c66
-rw-r--r--drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c10
-rw-r--r--drivers/misc/mei/bus-fixup.c2
-rw-r--r--drivers/misc/mei/hdcp/mei_hdcp.c2
-rw-r--r--drivers/misc/mei/hw.h2
-rw-r--r--drivers/misc/mei/main.c1
-rw-r--r--drivers/misc/mei/pxp/mei_pxp.c2
-rw-r--r--drivers/misc/sgi-xp/xpc_main.c24
-rw-r--r--drivers/misc/smpro-errmon.c82
-rw-r--r--drivers/misc/sram.c28
-rw-r--r--drivers/misc/sram.h1
-rw-r--r--drivers/misc/vmw_vmci/vmci_host.c8
-rw-r--r--drivers/nvmem/Kconfig7
-rw-r--r--drivers/nvmem/Makefile1
-rw-r--r--drivers/nvmem/bcm-ocotp.c4
-rw-r--r--drivers/nvmem/core.c169
-rw-r--r--drivers/nvmem/imx-ocotp.c30
-rw-r--r--drivers/nvmem/layouts/Kconfig23
-rw-r--r--drivers/nvmem/layouts/Makefile7
-rw-r--r--drivers/nvmem/layouts/onie-tlv.c244
-rw-r--r--drivers/nvmem/layouts/sl28vpd.c153
-rw-r--r--drivers/nvmem/mtk-efuse.c53
-rw-r--r--drivers/nvmem/nintendo-otp.c4
-rw-r--r--drivers/nvmem/stm32-romem.c2
-rw-r--r--drivers/nvmem/u-boot-env.c26
-rw-r--r--drivers/nvmem/vf610-ocotp.c3
-rw-r--r--drivers/of/Makefile2
-rw-r--r--drivers/of/base.c18
-rw-r--r--drivers/of/device.c75
-rw-r--r--drivers/of/module.c74
-rw-r--r--drivers/spi/spi.c4
-rw-r--r--drivers/spmi/hisi-spmi-controller.c5
-rw-r--r--drivers/spmi/spmi-mtk-pmif.c7
-rw-r--r--drivers/spmi/spmi-pmic-arb.c9
-rw-r--r--drivers/spmi/spmi.c8
-rw-r--r--drivers/staging/iio/Kconfig1
-rw-r--r--drivers/staging/iio/Makefile1
-rw-r--r--drivers/staging/iio/meter/Kconfig37
-rw-r--r--drivers/staging/iio/meter/Makefile8
-rw-r--r--drivers/staging/iio/meter/ade7854-i2c.c153
-rw-r--r--drivers/staging/iio/meter/ade7854-spi.c160
-rw-r--r--drivers/staging/iio/meter/ade7854.c556
-rw-r--r--drivers/staging/iio/meter/ade7854.h173
-rw-r--r--drivers/staging/iio/meter/meter.h398
-rw-r--r--drivers/tty/Kconfig9
-rw-r--r--drivers/usb/common/ulpi.c2
-rw-r--r--drivers/w1/masters/Kconfig2
-rw-r--r--drivers/w1/masters/ds2482.c13
-rw-r--r--drivers/w1/masters/ds2490.c13
-rw-r--r--drivers/w1/masters/matrox_w1.c16
-rw-r--r--drivers/w1/masters/omap_hdq.c14
-rw-r--r--drivers/w1/masters/w1-gpio.c4
-rw-r--r--drivers/w1/slaves/w1_ds2406.c35
-rw-r--r--drivers/w1/slaves/w1_ds2408.c12
-rw-r--r--drivers/w1/slaves/w1_ds2413.c8
-rw-r--r--drivers/w1/slaves/w1_ds2433.c23
-rw-r--r--drivers/w1/slaves/w1_ds2780.c1
-rw-r--r--drivers/w1/slaves/w1_ds2781.c1
-rw-r--r--drivers/w1/slaves/w1_ds2805.c2
-rw-r--r--drivers/w1/slaves/w1_ds28e04.c21
-rw-r--r--drivers/w1/slaves/w1_ds28e17.c6
192 files changed, 9752 insertions, 10311 deletions
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 968bd0a6fd78..514ae6b24cb2 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -241,4 +241,6 @@ source "drivers/peci/Kconfig"
source "drivers/hte/Kconfig"
+source "drivers/cdx/Kconfig"
+
endmenu
diff --git a/drivers/Makefile b/drivers/Makefile
index 20b118dca999..7241d80a7b29 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -194,3 +194,4 @@ obj-$(CONFIG_MOST) += most/
obj-$(CONFIG_PECI) += peci/
obj-$(CONFIG_HTE) += hte/
obj-$(CONFIG_DRM_ACCEL) += accel/
+obj-$(CONFIG_CDX_BUS) += cdx/
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index c32a06bcac0c..d161ff707de4 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -810,9 +810,10 @@ static bool acpi_of_modalias(struct acpi_device *adev,
* @modalias: Pointer to buffer that modalias value will be copied into
* @len: Length of modalias buffer
*
- * This is a counterpart of of_modalias_node() for struct acpi_device objects.
- * If there is a compatible string for @adev, it will be copied to @modalias
- * with the vendor prefix stripped; otherwise, @default_id will be used.
+ * This is a counterpart of of_alias_from_compatible() for struct acpi_device
+ * objects. If there is a compatible string for @adev, it will be copied to
+ * @modalias with the vendor prefix stripped; otherwise, @default_id will be
+ * used.
*/
void acpi_set_modalias(struct acpi_device *adev, const char *default_id,
char *modalias, size_t len)
diff --git a/drivers/bus/mhi/ep/main.c b/drivers/bus/mhi/ep/main.c
index a6a48e515478..600881808982 100644
--- a/drivers/bus/mhi/ep/main.c
+++ b/drivers/bus/mhi/ep/main.c
@@ -126,7 +126,7 @@ static int mhi_ep_process_cmd_ring(struct mhi_ep_ring *ring, struct mhi_ring_ele
/* Check if the channel is supported by the controller */
if ((ch_id >= mhi_cntrl->max_chan) || !mhi_cntrl->mhi_chan[ch_id].name) {
- dev_err(dev, "Channel (%u) not supported!\n", ch_id);
+ dev_dbg(dev, "Channel (%u) not supported!\n", ch_id);
return -ENODEV;
}
@@ -702,7 +702,7 @@ static void mhi_ep_cmd_ring_worker(struct work_struct *work)
el = &ring->ring_cache[ring->rd_offset];
ret = mhi_ep_process_cmd_ring(ring, el);
- if (ret)
+ if (ret && ret != -ENODEV)
dev_err(dev, "Error processing cmd ring element: %zu\n", ring->rd_offset);
mhi_ep_ring_inc_index(ring);
diff --git a/drivers/bus/mhi/host/boot.c b/drivers/bus/mhi/host/boot.c
index 1c69feee1703..d2a19b07ccb8 100644
--- a/drivers/bus/mhi/host/boot.c
+++ b/drivers/bus/mhi/host/boot.c
@@ -391,6 +391,7 @@ void mhi_fw_load_handler(struct mhi_controller *mhi_cntrl)
{
const struct firmware *firmware = NULL;
struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ enum mhi_pm_state new_state;
const char *fw_name;
void *buf;
dma_addr_t dma_addr;
@@ -508,14 +509,18 @@ error_ready_state:
}
error_fw_load:
- mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
- wake_up_all(&mhi_cntrl->state_event);
+ write_lock_irq(&mhi_cntrl->pm_lock);
+ new_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_FW_DL_ERR);
+ write_unlock_irq(&mhi_cntrl->pm_lock);
+ if (new_state == MHI_PM_FW_DL_ERR)
+ wake_up_all(&mhi_cntrl->state_event);
}
int mhi_download_amss_image(struct mhi_controller *mhi_cntrl)
{
struct image_info *image_info = mhi_cntrl->fbc_image;
struct device *dev = &mhi_cntrl->mhi_dev->dev;
+ enum mhi_pm_state new_state;
int ret;
if (!image_info)
@@ -526,8 +531,11 @@ int mhi_download_amss_image(struct mhi_controller *mhi_cntrl)
&image_info->mhi_buf[image_info->entries - 1]);
if (ret) {
dev_err(dev, "MHI did not load AMSS, ret:%d\n", ret);
- mhi_cntrl->pm_state = MHI_PM_FW_DL_ERR;
- wake_up_all(&mhi_cntrl->state_event);
+ write_lock_irq(&mhi_cntrl->pm_lock);
+ new_state = mhi_tryset_pm_state(mhi_cntrl, MHI_PM_FW_DL_ERR);
+ write_unlock_irq(&mhi_cntrl->pm_lock);
+ if (new_state == MHI_PM_FW_DL_ERR)
+ wake_up_all(&mhi_cntrl->state_event);
}
return ret;
diff --git a/drivers/bus/mhi/host/init.c b/drivers/bus/mhi/host/init.c
index 3d779ee6396d..f72fcb66f408 100644
--- a/drivers/bus/mhi/host/init.c
+++ b/drivers/bus/mhi/host/init.c
@@ -516,6 +516,12 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
return -EIO;
}
+ if (val >= mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB)) {
+ dev_err(dev, "CHDB offset: 0x%x is out of range: 0x%zx\n",
+ val, mhi_cntrl->reg_len - (8 * MHI_DEV_WAKE_DB));
+ return -ERANGE;
+ }
+
/* Setup wake db */
mhi_cntrl->wake_db = base + val + (8 * MHI_DEV_WAKE_DB);
mhi_cntrl->wake_set = false;
@@ -532,6 +538,12 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
return -EIO;
}
+ if (val >= mhi_cntrl->reg_len - (8 * mhi_cntrl->total_ev_rings)) {
+ dev_err(dev, "ERDB offset: 0x%x is out of range: 0x%zx\n",
+ val, mhi_cntrl->reg_len - (8 * mhi_cntrl->total_ev_rings));
+ return -ERANGE;
+ }
+
/* Setup event db address for each ev_ring */
mhi_event = mhi_cntrl->mhi_event;
for (i = 0; i < mhi_cntrl->total_ev_rings; i++, val += 8, mhi_event++) {
@@ -1100,7 +1112,7 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
if (bhi_off >= mhi_cntrl->reg_len) {
dev_err(dev, "BHI offset: 0x%x is out of range: 0x%zx\n",
bhi_off, mhi_cntrl->reg_len);
- ret = -EINVAL;
+ ret = -ERANGE;
goto error_reg_offset;
}
mhi_cntrl->bhi = mhi_cntrl->regs + bhi_off;
@@ -1117,7 +1129,7 @@ int mhi_prepare_for_power_up(struct mhi_controller *mhi_cntrl)
dev_err(dev,
"BHIe offset: 0x%x is out of range: 0x%zx\n",
bhie_off, mhi_cntrl->reg_len);
- ret = -EINVAL;
+ ret = -ERANGE;
goto error_reg_offset;
}
mhi_cntrl->bhie = mhi_cntrl->regs + bhie_off;
diff --git a/drivers/bus/mhi/host/main.c b/drivers/bus/mhi/host/main.c
index df0fbfee7b78..74a75439c713 100644
--- a/drivers/bus/mhi/host/main.c
+++ b/drivers/bus/mhi/host/main.c
@@ -503,7 +503,7 @@ irqreturn_t mhi_intvec_threaded_handler(int irq_number, void *priv)
}
write_unlock_irq(&mhi_cntrl->pm_lock);
- if (pm_state != MHI_PM_SYS_ERR_DETECT || ee == mhi_cntrl->ee)
+ if (pm_state != MHI_PM_SYS_ERR_DETECT)
goto exit_intvec;
switch (ee) {
@@ -961,7 +961,9 @@ int mhi_process_ctrl_ev_ring(struct mhi_controller *mhi_cntrl,
}
read_lock_bh(&mhi_cntrl->pm_lock);
- if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
+
+ /* Ring EV DB only if there is any pending element to process */
+ if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)) && count)
mhi_ring_er_db(mhi_event);
read_unlock_bh(&mhi_cntrl->pm_lock);
@@ -1031,7 +1033,9 @@ int mhi_process_data_event_ring(struct mhi_controller *mhi_cntrl,
count++;
}
read_lock_bh(&mhi_cntrl->pm_lock);
- if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)))
+
+ /* Ring EV DB only if there is any pending element to process */
+ if (likely(MHI_DB_ACCESS_VALID(mhi_cntrl)) && count)
mhi_ring_er_db(mhi_event);
read_unlock_bh(&mhi_cntrl->pm_lock);
@@ -1679,18 +1683,3 @@ void mhi_unprepare_from_transfer(struct mhi_device *mhi_dev)
}
}
EXPORT_SYMBOL_GPL(mhi_unprepare_from_transfer);
-
-int mhi_poll(struct mhi_device *mhi_dev, u32 budget)
-{
- struct mhi_controller *mhi_cntrl = mhi_dev->mhi_cntrl;
- struct mhi_chan *mhi_chan = mhi_dev->dl_chan;
- struct mhi_event *mhi_event = &mhi_cntrl->mhi_event[mhi_chan->er_index];
- int ret;
-
- spin_lock_bh(&mhi_event->lock);
- ret = mhi_event->process_event(mhi_cntrl, mhi_event, budget);
- spin_unlock_bh(&mhi_event->lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(mhi_poll);
diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
index f39657f71483..db0a0b062d8e 100644
--- a/drivers/bus/mhi/host/pci_generic.c
+++ b/drivers/bus/mhi/host/pci_generic.c
@@ -8,7 +8,6 @@
* Copyright (C) 2020 Linaro Ltd <loic.poulain@linaro.org>
*/
-#include <linux/aer.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/mhi.h>
@@ -344,8 +343,6 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
- MHI_CHANNEL_CONFIG_UL(92, "DUN2", 32, 1),
- MHI_CHANNEL_CONFIG_DL(93, "DUN2", 32, 1),
MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
};
@@ -366,6 +363,15 @@ static const struct mhi_controller_config modem_foxconn_sdx55_config = {
.event_cfg = mhi_foxconn_sdx55_events,
};
+static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = {
+ .name = "foxconn-sdx24",
+ .config = &modem_foxconn_sdx55_config,
+ .bar_num = MHI_PCI_DEFAULT_BAR_NUM,
+ .dma_data_width = 32,
+ .mru_default = 32768,
+ .sideband_wake = false,
+};
+
static const struct mhi_pci_dev_info mhi_foxconn_sdx55_info = {
.name = "foxconn-sdx55",
.fw = "qcom/sdx55m/sbl1.mbn",
@@ -590,6 +596,15 @@ static const struct pci_device_id mhi_pci_id_table[] = {
/* T99W373 (sdx62) */
{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0d9),
.driver_data = (kernel_ulong_t) &mhi_foxconn_sdx65_info },
+ /* T99W510 (sdx24), variant 1 */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f0),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
+ /* T99W510 (sdx24), variant 2 */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f1),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
+ /* T99W510 (sdx24), variant 3 */
+ { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xe0f2),
+ .driver_data = (kernel_ulong_t) &mhi_foxconn_sdx24_info },
/* MV31-W (Cinterion) */
{ PCI_DEVICE(PCI_VENDOR_ID_THALES, 0x00b3),
.driver_data = (kernel_ulong_t) &mhi_mv31_info },
@@ -903,11 +918,9 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
mhi_pdev->pci_state = pci_store_saved_state(pdev);
pci_load_saved_state(pdev, NULL);
- pci_enable_pcie_error_reporting(pdev);
-
err = mhi_register_controller(mhi_cntrl, mhi_cntrl_config);
if (err)
- goto err_disable_reporting;
+ return err;
/* MHI bus does not power up the controller by default */
err = mhi_prepare_for_power_up(mhi_cntrl);
@@ -941,8 +954,6 @@ err_unprepare:
mhi_unprepare_after_power_down(mhi_cntrl);
err_unregister:
mhi_unregister_controller(mhi_cntrl);
-err_disable_reporting:
- pci_disable_pcie_error_reporting(pdev);
return err;
}
@@ -965,7 +976,6 @@ static void mhi_pci_remove(struct pci_dev *pdev)
pm_runtime_get_noresume(&pdev->dev);
mhi_unregister_controller(mhi_cntrl);
- pci_disable_pcie_error_reporting(pdev);
}
static void mhi_pci_shutdown(struct pci_dev *pdev)
diff --git a/drivers/cdx/Kconfig b/drivers/cdx/Kconfig
new file mode 100644
index 000000000000..a08958485e31
--- /dev/null
+++ b/drivers/cdx/Kconfig
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# CDX bus configuration
+#
+# Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+#
+
+config CDX_BUS
+ bool "CDX Bus driver"
+ depends on OF && ARM64
+ help
+ Driver to enable Composable DMA Transfer(CDX) Bus. CDX bus
+ exposes Fabric devices which uses composable DMA IP to the
+ APU. CDX bus provides a mechanism for scanning and probing
+ of CDX devices. CDX devices are memory mapped on system bus
+ for embedded CPUs. CDX bus uses CDX controller and firmware
+ to scan these CDX devices.
+
+source "drivers/cdx/controller/Kconfig"
diff --git a/drivers/cdx/Makefile b/drivers/cdx/Makefile
new file mode 100644
index 000000000000..0324e4914f6e
--- /dev/null
+++ b/drivers/cdx/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for CDX
+#
+# Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+#
+
+obj-$(CONFIG_CDX_BUS) += cdx.o controller/
diff --git a/drivers/cdx/cdx.c b/drivers/cdx/cdx.c
new file mode 100644
index 000000000000..67c32cb2c006
--- /dev/null
+++ b/drivers/cdx/cdx.c
@@ -0,0 +1,535 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CDX bus driver.
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+/*
+ * Architecture Overview
+ * =====================
+ * CDX is a Hardware Architecture designed for AMD FPGA devices. It
+ * consists of sophisticated mechanism for interaction between FPGA,
+ * Firmware and the APUs (Application CPUs).
+ *
+ * Firmware resides on RPU (Realtime CPUs) which interacts with
+ * the FPGA program manager and the APUs. The RPU provides memory-mapped
+ * interface (RPU if) which is used to communicate with APUs.
+ *
+ * The diagram below shows an overview of the CDX architecture:
+ *
+ * +--------------------------------------+
+ * | Application CPUs (APU) |
+ * | |
+ * | CDX device drivers|
+ * | Linux OS | |
+ * | CDX bus |
+ * | | |
+ * | CDX controller |
+ * | | |
+ * +-----------------------------|--------+
+ * | (discover, config,
+ * | reset, rescan)
+ * |
+ * +------------------------| RPU if |----+
+ * | | |
+ * | V |
+ * | Realtime CPUs (RPU) |
+ * | |
+ * +--------------------------------------+
+ * |
+ * +---------------------|----------------+
+ * | FPGA | |
+ * | +-----------------------+ |
+ * | | | | |
+ * | +-------+ +-------+ +-------+ |
+ * | | dev 1 | | dev 2 | | dev 3 | |
+ * | +-------+ +-------+ +-------+ |
+ * +--------------------------------------+
+ *
+ * The RPU firmware extracts the device information from the loaded FPGA
+ * image and implements a mechanism that allows the APU drivers to
+ * enumerate such devices (device personality and resource details) via
+ * a dedicated communication channel. RPU mediates operations such as
+ * discover, reset and rescan of the FPGA devices for the APU. This is
+ * done using memory mapped interface provided by the RPU to APU.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/xarray.h>
+#include <linux/cdx/cdx_bus.h>
+#include "cdx.h"
+
+/* Default DMA mask for devices on a CDX bus */
+#define CDX_DEFAULT_DMA_MASK (~0ULL)
+#define MAX_CDX_CONTROLLERS 16
+
+/* CDX controllers registered with the CDX bus */
+static DEFINE_XARRAY_ALLOC(cdx_controllers);
+
+/**
+ * cdx_dev_reset - Reset a CDX device
+ * @dev: CDX device
+ *
+ * Return: -errno on failure, 0 on success.
+ */
+int cdx_dev_reset(struct device *dev)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+ struct cdx_controller *cdx = cdx_dev->cdx;
+ struct cdx_device_config dev_config = {0};
+ struct cdx_driver *cdx_drv;
+ int ret;
+
+ cdx_drv = to_cdx_driver(dev->driver);
+ /* Notify driver that device is being reset */
+ if (cdx_drv && cdx_drv->reset_prepare)
+ cdx_drv->reset_prepare(cdx_dev);
+
+ dev_config.type = CDX_DEV_RESET_CONF;
+ ret = cdx->ops->dev_configure(cdx, cdx_dev->bus_num,
+ cdx_dev->dev_num, &dev_config);
+ if (ret)
+ dev_err(dev, "cdx device reset failed\n");
+
+ /* Notify driver that device reset is complete */
+ if (cdx_drv && cdx_drv->reset_done)
+ cdx_drv->reset_done(cdx_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cdx_dev_reset);
+
+/**
+ * cdx_unregister_device - Unregister a CDX device
+ * @dev: CDX device
+ * @data: This is always passed as NULL, and is not used in this API,
+ * but is required here as the bus_for_each_dev() API expects
+ * the passed function (cdx_unregister_device) to have this
+ * as an argument.
+ *
+ * Return: 0 on success.
+ */
+static int cdx_unregister_device(struct device *dev,
+ void *data)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+
+ kfree(cdx_dev->driver_override);
+ cdx_dev->driver_override = NULL;
+ /*
+ * Do not free cdx_dev here as it would be freed in
+ * cdx_device_release() called from within put_device().
+ */
+ device_del(&cdx_dev->dev);
+ put_device(&cdx_dev->dev);
+
+ return 0;
+}
+
+static void cdx_unregister_devices(struct bus_type *bus)
+{
+ /* Reset all the devices attached to cdx bus */
+ bus_for_each_dev(bus, NULL, NULL, cdx_unregister_device);
+}
+
+/**
+ * cdx_match_one_device - Tell if a CDX device structure has a matching
+ * CDX device id structure
+ * @id: single CDX device id structure to match
+ * @dev: the CDX device structure to match against
+ *
+ * Return: matching cdx_device_id structure or NULL if there is no match.
+ */
+static inline const struct cdx_device_id *
+cdx_match_one_device(const struct cdx_device_id *id,
+ const struct cdx_device *dev)
+{
+ /* Use vendor ID and device ID for matching */
+ if ((id->vendor == CDX_ANY_ID || id->vendor == dev->vendor) &&
+ (id->device == CDX_ANY_ID || id->device == dev->device))
+ return id;
+ return NULL;
+}
+
+/**
+ * cdx_match_id - See if a CDX device matches a given cdx_id table
+ * @ids: array of CDX device ID structures to search in
+ * @dev: the CDX device structure to match against.
+ *
+ * Used by a driver to check whether a CDX device is in its list of
+ * supported devices. Returns the matching cdx_device_id structure or
+ * NULL if there is no match.
+ *
+ * Return: matching cdx_device_id structure or NULL if there is no match.
+ */
+static inline const struct cdx_device_id *
+cdx_match_id(const struct cdx_device_id *ids, struct cdx_device *dev)
+{
+ if (ids) {
+ while (ids->vendor || ids->device) {
+ if (cdx_match_one_device(ids, dev))
+ return ids;
+ ids++;
+ }
+ }
+ return NULL;
+}
+
+/**
+ * cdx_bus_match - device to driver matching callback
+ * @dev: the cdx device to match against
+ * @drv: the device driver to search for matching cdx device
+ * structures
+ *
+ * Return: true on success, false otherwise.
+ */
+static int cdx_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+ struct cdx_driver *cdx_drv = to_cdx_driver(drv);
+ const struct cdx_device_id *found_id = NULL;
+ const struct cdx_device_id *ids;
+
+ ids = cdx_drv->match_id_table;
+
+ /* When driver_override is set, only bind to the matching driver */
+ if (cdx_dev->driver_override && strcmp(cdx_dev->driver_override, drv->name))
+ return false;
+
+ found_id = cdx_match_id(ids, cdx_dev);
+ if (!found_id)
+ return false;
+
+ do {
+ /*
+ * In case override_only was set, enforce driver_override
+ * matching.
+ */
+ if (!found_id->override_only)
+ return true;
+ if (cdx_dev->driver_override)
+ return true;
+
+ ids = found_id + 1;
+ found_id = cdx_match_id(ids, cdx_dev);
+ } while (found_id);
+
+ return false;
+}
+
+static int cdx_probe(struct device *dev)
+{
+ struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver);
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+ int error;
+
+ error = cdx_drv->probe(cdx_dev);
+ if (error) {
+ dev_err_probe(dev, error, "%s failed\n", __func__);
+ return error;
+ }
+
+ return 0;
+}
+
+static void cdx_remove(struct device *dev)
+{
+ struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver);
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+
+ if (cdx_drv && cdx_drv->remove)
+ cdx_drv->remove(cdx_dev);
+}
+
+static void cdx_shutdown(struct device *dev)
+{
+ struct cdx_driver *cdx_drv = to_cdx_driver(dev->driver);
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+
+ if (cdx_drv && cdx_drv->shutdown)
+ cdx_drv->shutdown(cdx_dev);
+}
+
+static int cdx_dma_configure(struct device *dev)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+ u32 input_id = cdx_dev->req_id;
+ int ret;
+
+ ret = of_dma_configure_id(dev, dev->parent->of_node, 0, &input_id);
+ if (ret && ret != -EPROBE_DEFER) {
+ dev_err(dev, "of_dma_configure_id() failed\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+/* show configuration fields */
+#define cdx_config_attr(field, format_string) \
+static ssize_t \
+field##_show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+ struct cdx_device *cdx_dev = to_cdx_device(dev); \
+ return sysfs_emit(buf, format_string, cdx_dev->field); \
+} \
+static DEVICE_ATTR_RO(field)
+
+cdx_config_attr(vendor, "0x%04x\n");
+cdx_config_attr(device, "0x%04x\n");
+
+static ssize_t remove_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ bool val;
+
+ if (kstrtobool(buf, &val) < 0)
+ return -EINVAL;
+
+ if (!val)
+ return -EINVAL;
+
+ if (device_remove_file_self(dev, attr)) {
+ int ret;
+
+ ret = cdx_unregister_device(dev, NULL);
+ if (ret)
+ return ret;
+ }
+
+ return count;
+}
+static DEVICE_ATTR_WO(remove);
+
+static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ bool val;
+ int ret;
+
+ if (kstrtobool(buf, &val) < 0)
+ return -EINVAL;
+
+ if (!val)
+ return -EINVAL;
+
+ ret = cdx_dev_reset(dev);
+ if (ret)
+ return ret;
+
+ return count;
+}
+static DEVICE_ATTR_WO(reset);
+
+static ssize_t driver_override_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+ int ret;
+
+ if (WARN_ON(dev->bus != &cdx_bus_type))
+ return -EINVAL;
+
+ ret = driver_set_override(dev, &cdx_dev->driver_override, buf, count);
+ if (ret)
+ return ret;
+
+ return count;
+}
+
+static ssize_t driver_override_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+
+ return sysfs_emit(buf, "%s\n", cdx_dev->driver_override);
+}
+static DEVICE_ATTR_RW(driver_override);
+
+static struct attribute *cdx_dev_attrs[] = {
+ &dev_attr_remove.attr,
+ &dev_attr_reset.attr,
+ &dev_attr_vendor.attr,
+ &dev_attr_device.attr,
+ &dev_attr_driver_override.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cdx_dev);
+
+static ssize_t rescan_store(struct bus_type *bus,
+ const char *buf, size_t count)
+{
+ struct cdx_controller *cdx;
+ unsigned long index;
+ bool val;
+
+ if (kstrtobool(buf, &val) < 0)
+ return -EINVAL;
+
+ if (!val)
+ return -EINVAL;
+
+ /* Unregister all the devices on the bus */
+ cdx_unregister_devices(&cdx_bus_type);
+
+ /* Rescan all the devices */
+ xa_for_each(&cdx_controllers, index, cdx) {
+ int ret;
+
+ ret = cdx->ops->scan(cdx);
+ if (ret)
+ dev_err(cdx->dev, "cdx bus scanning failed\n");
+ }
+
+ return count;
+}
+static BUS_ATTR_WO(rescan);
+
+static struct attribute *cdx_bus_attrs[] = {
+ &bus_attr_rescan.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(cdx_bus);
+
+struct bus_type cdx_bus_type = {
+ .name = "cdx",
+ .match = cdx_bus_match,
+ .probe = cdx_probe,
+ .remove = cdx_remove,
+ .shutdown = cdx_shutdown,
+ .dma_configure = cdx_dma_configure,
+ .bus_groups = cdx_bus_groups,
+ .dev_groups = cdx_dev_groups,
+};
+EXPORT_SYMBOL_GPL(cdx_bus_type);
+
+int __cdx_driver_register(struct cdx_driver *cdx_driver,
+ struct module *owner)
+{
+ int error;
+
+ cdx_driver->driver.owner = owner;
+ cdx_driver->driver.bus = &cdx_bus_type;
+
+ error = driver_register(&cdx_driver->driver);
+ if (error) {
+ pr_err("driver_register() failed for %s: %d\n",
+ cdx_driver->driver.name, error);
+ return error;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__cdx_driver_register);
+
+void cdx_driver_unregister(struct cdx_driver *cdx_driver)
+{
+ driver_unregister(&cdx_driver->driver);
+}
+EXPORT_SYMBOL_GPL(cdx_driver_unregister);
+
+static void cdx_device_release(struct device *dev)
+{
+ struct cdx_device *cdx_dev = to_cdx_device(dev);
+
+ kfree(cdx_dev);
+}
+
+int cdx_device_add(struct cdx_dev_params *dev_params)
+{
+ struct cdx_controller *cdx = dev_params->cdx;
+ struct device *parent = cdx->dev;
+ struct cdx_device *cdx_dev;
+ int ret;
+
+ cdx_dev = kzalloc(sizeof(*cdx_dev), GFP_KERNEL);
+ if (!cdx_dev)
+ return -ENOMEM;
+
+ /* Populate resource */
+ memcpy(cdx_dev->res, dev_params->res, sizeof(struct resource) *
+ dev_params->res_count);
+ cdx_dev->res_count = dev_params->res_count;
+
+ /* Populate CDX dev params */
+ cdx_dev->req_id = dev_params->req_id;
+ cdx_dev->vendor = dev_params->vendor;
+ cdx_dev->device = dev_params->device;
+ cdx_dev->bus_num = dev_params->bus_num;
+ cdx_dev->dev_num = dev_params->dev_num;
+ cdx_dev->cdx = dev_params->cdx;
+ cdx_dev->dma_mask = CDX_DEFAULT_DMA_MASK;
+
+ /* Initialize generic device */
+ device_initialize(&cdx_dev->dev);
+ cdx_dev->dev.parent = parent;
+ cdx_dev->dev.bus = &cdx_bus_type;
+ cdx_dev->dev.dma_mask = &cdx_dev->dma_mask;
+ cdx_dev->dev.release = cdx_device_release;
+
+ /* Set Name */
+ dev_set_name(&cdx_dev->dev, "cdx-%02x:%02x",
+ ((cdx->id << CDX_CONTROLLER_ID_SHIFT) | (cdx_dev->bus_num & CDX_BUS_NUM_MASK)),
+ cdx_dev->dev_num);
+
+ ret = device_add(&cdx_dev->dev);
+ if (ret) {
+ dev_err(&cdx_dev->dev,
+ "cdx device add failed: %d", ret);
+ goto fail;
+ }
+
+ return 0;
+fail:
+ /*
+ * Do not free cdx_dev here as it would be freed in
+ * cdx_device_release() called from put_device().
+ */
+ put_device(&cdx_dev->dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(cdx_device_add);
+
+int cdx_register_controller(struct cdx_controller *cdx)
+{
+ int ret;
+
+ ret = xa_alloc(&cdx_controllers, &cdx->id, cdx,
+ XA_LIMIT(0, MAX_CDX_CONTROLLERS - 1), GFP_KERNEL);
+ if (ret) {
+ dev_err(cdx->dev,
+ "No free index available. Maximum controllers already registered\n");
+ cdx->id = (u8)MAX_CDX_CONTROLLERS;
+ return ret;
+ }
+
+ /* Scan all the devices */
+ cdx->ops->scan(cdx);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cdx_register_controller);
+
+void cdx_unregister_controller(struct cdx_controller *cdx)
+{
+ if (cdx->id >= MAX_CDX_CONTROLLERS)
+ return;
+
+ device_for_each_child(cdx->dev, NULL, cdx_unregister_device);
+ xa_erase(&cdx_controllers, cdx->id);
+}
+EXPORT_SYMBOL_GPL(cdx_unregister_controller);
+
+static int __init cdx_bus_init(void)
+{
+ return bus_register(&cdx_bus_type);
+}
+postcore_initcall(cdx_bus_init);
diff --git a/drivers/cdx/cdx.h b/drivers/cdx/cdx.h
new file mode 100644
index 000000000000..c436ac7ac86f
--- /dev/null
+++ b/drivers/cdx/cdx.h
@@ -0,0 +1,62 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Header file for the CDX Bus
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef _CDX_H_
+#define _CDX_H_
+
+#include <linux/cdx/cdx_bus.h>
+
+/**
+ * struct cdx_dev_params - CDX device parameters
+ * @cdx: CDX controller associated with the device
+ * @parent: Associated CDX controller
+ * @vendor: Vendor ID for CDX device
+ * @device: Device ID for CDX device
+ * @bus_num: Bus number for this CDX device
+ * @dev_num: Device number for this device
+ * @res: array of MMIO region entries
+ * @res_count: number of valid MMIO regions
+ * @req_id: Requestor ID associated with CDX device
+ */
+struct cdx_dev_params {
+ struct cdx_controller *cdx;
+ u16 vendor;
+ u16 device;
+ u8 bus_num;
+ u8 dev_num;
+ struct resource res[MAX_CDX_DEV_RESOURCES];
+ u8 res_count;
+ u32 req_id;
+};
+
+/**
+ * cdx_register_controller - Register a CDX controller and its ports
+ * on the CDX bus.
+ * @cdx: The CDX controller to register
+ *
+ * Return: -errno on failure, 0 on success.
+ */
+int cdx_register_controller(struct cdx_controller *cdx);
+
+/**
+ * cdx_unregister_controller - Unregister a CDX controller
+ * @cdx: The CDX controller to unregister
+ */
+void cdx_unregister_controller(struct cdx_controller *cdx);
+
+/**
+ * cdx_device_add - Add a CDX device. This function adds a CDX device
+ * on the CDX bus as per the device parameters provided
+ * by caller. It also creates and registers an associated
+ * Linux generic device.
+ * @dev_params: device parameters associated with the device to be created.
+ *
+ * Return: -errno on failure, 0 on success.
+ */
+int cdx_device_add(struct cdx_dev_params *dev_params);
+
+#endif /* _CDX_H_ */
diff --git a/drivers/cdx/controller/Kconfig b/drivers/cdx/controller/Kconfig
new file mode 100644
index 000000000000..c3e3b9ff8dfe
--- /dev/null
+++ b/drivers/cdx/controller/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# CDX controller configuration
+#
+# Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+#
+
+if CDX_BUS
+
+config CDX_CONTROLLER
+ tristate "CDX bus controller"
+ select REMOTEPROC
+ select RPMSG
+ help
+ CDX controller drives the CDX bus. It interacts with
+ firmware to get the hardware devices and registers with
+ the CDX bus. Say Y to enable the CDX hardware driver.
+
+ If unsure, say N.
+
+config MCDI_LOGGING
+ bool "MCDI Logging for the CDX controller"
+ depends on CDX_CONTROLLER
+ help
+ Enable MCDI Logging for
+ the CDX Controller for debug
+ purpose.
+
+ If unsure, say N.
+
+endif
diff --git a/drivers/cdx/controller/Makefile b/drivers/cdx/controller/Makefile
new file mode 100644
index 000000000000..f071be411d96
--- /dev/null
+++ b/drivers/cdx/controller/Makefile
@@ -0,0 +1,9 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for CDX controller drivers
+#
+# Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+#
+
+obj-$(CONFIG_CDX_CONTROLLER) += cdx-controller.o
+cdx-controller-objs := cdx_controller.o cdx_rpmsg.o mcdi.o mcdi_functions.o
diff --git a/drivers/cdx/controller/bitfield.h b/drivers/cdx/controller/bitfield.h
new file mode 100644
index 000000000000..567f8ec47582
--- /dev/null
+++ b/drivers/cdx/controller/bitfield.h
@@ -0,0 +1,90 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2013 Solarflare Communications Inc.
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef CDX_BITFIELD_H
+#define CDX_BITFIELD_H
+
+#include <linux/bitfield.h>
+
+/* Lowest bit numbers and widths */
+#define CDX_DWORD_LBN 0
+#define CDX_DWORD_WIDTH 32
+
+/* Specified attribute (e.g. LBN) of the specified field */
+#define CDX_VAL(field, attribute) field ## _ ## attribute
+/* Low bit number of the specified field */
+#define CDX_LOW_BIT(field) CDX_VAL(field, LBN)
+/* Bit width of the specified field */
+#define CDX_WIDTH(field) CDX_VAL(field, WIDTH)
+/* High bit number of the specified field */
+#define CDX_HIGH_BIT(field) (CDX_LOW_BIT(field) + CDX_WIDTH(field) - 1)
+
+/* A doubleword (i.e. 4 byte) datatype - little-endian in HW */
+struct cdx_dword {
+ __le32 cdx_u32;
+};
+
+/* Value expanders for printk */
+#define CDX_DWORD_VAL(dword) \
+ ((unsigned int)le32_to_cpu((dword).cdx_u32))
+
+/*
+ * Extract bit field portion [low,high) from the 32-bit little-endian
+ * element which contains bits [min,max)
+ */
+#define CDX_DWORD_FIELD(dword, field) \
+ (FIELD_GET(GENMASK(CDX_HIGH_BIT(field), CDX_LOW_BIT(field)), \
+ le32_to_cpu((dword).cdx_u32)))
+
+/*
+ * Creates the portion of the named bit field that lies within the
+ * range [min,max).
+ */
+#define CDX_INSERT_FIELD(field, value) \
+ (FIELD_PREP(GENMASK(CDX_HIGH_BIT(field), \
+ CDX_LOW_BIT(field)), value))
+
+/*
+ * Creates the portion of the named bit fields that lie within the
+ * range [min,max).
+ */
+#define CDX_INSERT_FIELDS(field1, value1, \
+ field2, value2, \
+ field3, value3, \
+ field4, value4, \
+ field5, value5, \
+ field6, value6, \
+ field7, value7) \
+ (CDX_INSERT_FIELD(field1, (value1)) | \
+ CDX_INSERT_FIELD(field2, (value2)) | \
+ CDX_INSERT_FIELD(field3, (value3)) | \
+ CDX_INSERT_FIELD(field4, (value4)) | \
+ CDX_INSERT_FIELD(field5, (value5)) | \
+ CDX_INSERT_FIELD(field6, (value6)) | \
+ CDX_INSERT_FIELD(field7, (value7)))
+
+#define CDX_POPULATE_DWORD(dword, ...) \
+ (dword).cdx_u32 = cpu_to_le32(CDX_INSERT_FIELDS(__VA_ARGS__))
+
+/* Populate a dword field with various numbers of arguments */
+#define CDX_POPULATE_DWORD_7 CDX_POPULATE_DWORD
+#define CDX_POPULATE_DWORD_6(dword, ...) \
+ CDX_POPULATE_DWORD_7(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_POPULATE_DWORD_5(dword, ...) \
+ CDX_POPULATE_DWORD_6(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_POPULATE_DWORD_4(dword, ...) \
+ CDX_POPULATE_DWORD_5(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_POPULATE_DWORD_3(dword, ...) \
+ CDX_POPULATE_DWORD_4(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_POPULATE_DWORD_2(dword, ...) \
+ CDX_POPULATE_DWORD_3(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_POPULATE_DWORD_1(dword, ...) \
+ CDX_POPULATE_DWORD_2(dword, CDX_DWORD, 0, __VA_ARGS__)
+#define CDX_SET_DWORD(dword) \
+ CDX_POPULATE_DWORD_1(dword, CDX_DWORD, 0xffffffff)
+
+#endif /* CDX_BITFIELD_H */
diff --git a/drivers/cdx/controller/cdx_controller.c b/drivers/cdx/controller/cdx_controller.c
new file mode 100644
index 000000000000..dc52f95f8978
--- /dev/null
+++ b/drivers/cdx/controller/cdx_controller.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * CDX host controller driver for AMD versal-net platform.
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/cdx/cdx_bus.h>
+
+#include "cdx_controller.h"
+#include "../cdx.h"
+#include "mcdi_functions.h"
+#include "mcdi.h"
+
+static unsigned int cdx_mcdi_rpc_timeout(struct cdx_mcdi *cdx, unsigned int cmd)
+{
+ return MCDI_RPC_TIMEOUT;
+}
+
+static void cdx_mcdi_request(struct cdx_mcdi *cdx,
+ const struct cdx_dword *hdr, size_t hdr_len,
+ const struct cdx_dword *sdu, size_t sdu_len)
+{
+ if (cdx_rpmsg_send(cdx, hdr, hdr_len, sdu, sdu_len))
+ dev_err(&cdx->rpdev->dev, "Failed to send rpmsg data\n");
+}
+
+static const struct cdx_mcdi_ops mcdi_ops = {
+ .mcdi_rpc_timeout = cdx_mcdi_rpc_timeout,
+ .mcdi_request = cdx_mcdi_request,
+};
+
+void cdx_rpmsg_post_probe(struct cdx_controller *cdx)
+{
+ /* Register CDX controller with CDX bus driver */
+ if (cdx_register_controller(cdx))
+ dev_err(cdx->dev, "Failed to register CDX controller\n");
+}
+
+void cdx_rpmsg_pre_remove(struct cdx_controller *cdx)
+{
+ cdx_unregister_controller(cdx);
+ cdx_mcdi_wait_for_quiescence(cdx->priv, MCDI_RPC_TIMEOUT);
+}
+
+static int cdx_configure_device(struct cdx_controller *cdx,
+ u8 bus_num, u8 dev_num,
+ struct cdx_device_config *dev_config)
+{
+ int ret = 0;
+
+ switch (dev_config->type) {
+ case CDX_DEV_RESET_CONF:
+ ret = cdx_mcdi_reset_device(cdx->priv, bus_num, dev_num);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+static int cdx_scan_devices(struct cdx_controller *cdx)
+{
+ struct cdx_mcdi *cdx_mcdi = cdx->priv;
+ u8 bus_num, dev_num, num_cdx_bus;
+ int ret;
+
+ /* MCDI FW Read: Fetch the number of CDX buses on this controller */
+ ret = cdx_mcdi_get_num_buses(cdx_mcdi);
+ if (ret < 0) {
+ dev_err(cdx->dev,
+ "Get number of CDX buses failed: %d\n", ret);
+ return ret;
+ }
+ num_cdx_bus = (u8)ret;
+
+ for (bus_num = 0; bus_num < num_cdx_bus; bus_num++) {
+ u8 num_cdx_dev;
+
+ /* MCDI FW Read: Fetch the number of devices present */
+ ret = cdx_mcdi_get_num_devs(cdx_mcdi, bus_num);
+ if (ret < 0) {
+ dev_err(cdx->dev,
+ "Get devices on CDX bus %d failed: %d\n", bus_num, ret);
+ continue;
+ }
+ num_cdx_dev = (u8)ret;
+
+ for (dev_num = 0; dev_num < num_cdx_dev; dev_num++) {
+ struct cdx_dev_params dev_params;
+
+ /* MCDI FW: Get the device config */
+ ret = cdx_mcdi_get_dev_config(cdx_mcdi, bus_num,
+ dev_num, &dev_params);
+ if (ret) {
+ dev_err(cdx->dev,
+ "CDX device config get failed for %d(bus):%d(dev), %d\n",
+ bus_num, dev_num, ret);
+ continue;
+ }
+ dev_params.cdx = cdx;
+
+ /* Add the device to the cdx bus */
+ ret = cdx_device_add(&dev_params);
+ if (ret) {
+ dev_err(cdx->dev, "registering cdx dev: %d failed: %d\n",
+ dev_num, ret);
+ continue;
+ }
+
+ dev_dbg(cdx->dev, "CDX dev: %d on cdx bus: %d created\n",
+ dev_num, bus_num);
+ }
+ }
+
+ return 0;
+}
+
+static struct cdx_ops cdx_ops = {
+ .scan = cdx_scan_devices,
+ .dev_configure = cdx_configure_device,
+};
+
+static int xlnx_cdx_probe(struct platform_device *pdev)
+{
+ struct cdx_controller *cdx;
+ struct cdx_mcdi *cdx_mcdi;
+ int ret;
+
+ cdx_mcdi = kzalloc(sizeof(*cdx_mcdi), GFP_KERNEL);
+ if (!cdx_mcdi)
+ return -ENOMEM;
+
+ /* Store the MCDI ops */
+ cdx_mcdi->mcdi_ops = &mcdi_ops;
+ /* MCDI FW: Initialize the FW path */
+ ret = cdx_mcdi_init(cdx_mcdi);
+ if (ret) {
+ dev_err_probe(&pdev->dev, ret, "MCDI Initialization failed\n");
+ goto mcdi_init_fail;
+ }
+
+ cdx = kzalloc(sizeof(*cdx), GFP_KERNEL);
+ if (!cdx) {
+ ret = -ENOMEM;
+ goto cdx_alloc_fail;
+ }
+ platform_set_drvdata(pdev, cdx);
+
+ cdx->dev = &pdev->dev;
+ cdx->priv = cdx_mcdi;
+ cdx->ops = &cdx_ops;
+
+ ret = cdx_setup_rpmsg(pdev);
+ if (ret) {
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev, "Failed to register CDX RPMsg transport\n");
+ goto cdx_rpmsg_fail;
+ }
+
+ dev_info(&pdev->dev, "Successfully registered CDX controller with RPMsg as transport\n");
+ return 0;
+
+cdx_rpmsg_fail:
+ kfree(cdx);
+cdx_alloc_fail:
+ cdx_mcdi_finish(cdx_mcdi);
+mcdi_init_fail:
+ kfree(cdx_mcdi);
+
+ return ret;
+}
+
+static int xlnx_cdx_remove(struct platform_device *pdev)
+{
+ struct cdx_controller *cdx = platform_get_drvdata(pdev);
+ struct cdx_mcdi *cdx_mcdi = cdx->priv;
+
+ cdx_destroy_rpmsg(pdev);
+
+ kfree(cdx);
+
+ cdx_mcdi_finish(cdx_mcdi);
+ kfree(cdx_mcdi);
+
+ return 0;
+}
+
+static const struct of_device_id cdx_match_table[] = {
+ {.compatible = "xlnx,versal-net-cdx",},
+ { },
+};
+
+MODULE_DEVICE_TABLE(of, cdx_match_table);
+
+static struct platform_driver cdx_pdriver = {
+ .driver = {
+ .name = "cdx-controller",
+ .pm = NULL,
+ .of_match_table = cdx_match_table,
+ },
+ .probe = xlnx_cdx_probe,
+ .remove = xlnx_cdx_remove,
+};
+
+static int __init cdx_controller_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&cdx_pdriver);
+ if (ret)
+ pr_err("platform_driver_register() failed: %d\n", ret);
+
+ return ret;
+}
+
+static void __exit cdx_controller_exit(void)
+{
+ platform_driver_unregister(&cdx_pdriver);
+}
+
+module_init(cdx_controller_init);
+module_exit(cdx_controller_exit);
+
+MODULE_AUTHOR("AMD Inc.");
+MODULE_DESCRIPTION("CDX controller for AMD devices");
+MODULE_LICENSE("GPL");
diff --git a/drivers/cdx/controller/cdx_controller.h b/drivers/cdx/controller/cdx_controller.h
new file mode 100644
index 000000000000..43b7c742df87
--- /dev/null
+++ b/drivers/cdx/controller/cdx_controller.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Header file for the CDX Controller
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef _CDX_CONTROLLER_H_
+#define _CDX_CONTROLLER_H_
+
+#include <linux/cdx/cdx_bus.h>
+#include "mcdi_functions.h"
+
+void cdx_rpmsg_post_probe(struct cdx_controller *cdx);
+
+void cdx_rpmsg_pre_remove(struct cdx_controller *cdx);
+
+int cdx_rpmsg_send(struct cdx_mcdi *cdx_mcdi,
+ const struct cdx_dword *hdr, size_t hdr_len,
+ const struct cdx_dword *sdu, size_t sdu_len);
+
+void cdx_rpmsg_read_resp(struct cdx_mcdi *cdx_mcdi,
+ struct cdx_dword *outbuf, size_t offset,
+ size_t outlen);
+
+int cdx_setup_rpmsg(struct platform_device *pdev);
+
+void cdx_destroy_rpmsg(struct platform_device *pdev);
+
+#endif /* _CDX_CONT_PRIV_H_ */
diff --git a/drivers/cdx/controller/cdx_rpmsg.c b/drivers/cdx/controller/cdx_rpmsg.c
new file mode 100644
index 000000000000..f37e639d6ce3
--- /dev/null
+++ b/drivers/cdx/controller/cdx_rpmsg.c
@@ -0,0 +1,202 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Platform driver for CDX bus.
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/rpmsg.h>
+#include <linux/remoteproc.h>
+#include <linux/of_platform.h>
+#include <linux/cdx/cdx_bus.h>
+#include <linux/module.h>
+
+#include "../cdx.h"
+#include "cdx_controller.h"
+#include "mcdi_functions.h"
+#include "mcdi.h"
+
+static struct rpmsg_device_id cdx_rpmsg_id_table[] = {
+ { .name = "mcdi_ipc" },
+ { },
+};
+MODULE_DEVICE_TABLE(rpmsg, cdx_rpmsg_id_table);
+
+int cdx_rpmsg_send(struct cdx_mcdi *cdx_mcdi,
+ const struct cdx_dword *hdr, size_t hdr_len,
+ const struct cdx_dword *sdu, size_t sdu_len)
+{
+ unsigned char *send_buf;
+ int ret;
+
+ send_buf = kzalloc(hdr_len + sdu_len, GFP_KERNEL);
+ if (!send_buf)
+ return -ENOMEM;
+
+ memcpy(send_buf, hdr, hdr_len);
+ memcpy(send_buf + hdr_len, sdu, sdu_len);
+
+ ret = rpmsg_send(cdx_mcdi->ept, send_buf, hdr_len + sdu_len);
+ kfree(send_buf);
+
+ return ret;
+}
+
+static int cdx_attach_to_rproc(struct platform_device *pdev)
+{
+ struct device_node *r5_core_node;
+ struct cdx_controller *cdx_c;
+ struct cdx_mcdi *cdx_mcdi;
+ struct device *dev;
+ struct rproc *rp;
+ int ret;
+
+ dev = &pdev->dev;
+ cdx_c = platform_get_drvdata(pdev);
+ cdx_mcdi = cdx_c->priv;
+
+ r5_core_node = of_parse_phandle(dev->of_node, "xlnx,rproc", 0);
+ if (!r5_core_node) {
+ dev_err(&pdev->dev, "xlnx,rproc: invalid phandle\n");
+ return -EINVAL;
+ }
+
+ rp = rproc_get_by_phandle(r5_core_node->phandle);
+ if (!rp) {
+ ret = -EPROBE_DEFER;
+ goto pdev_err;
+ }
+
+ /* Attach to remote processor */
+ ret = rproc_boot(rp);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to attach to remote processor\n");
+ rproc_put(rp);
+ goto pdev_err;
+ }
+
+ cdx_mcdi->r5_rproc = rp;
+pdev_err:
+ of_node_put(r5_core_node);
+ return ret;
+}
+
+static void cdx_detach_to_r5(struct platform_device *pdev)
+{
+ struct cdx_controller *cdx_c;
+ struct cdx_mcdi *cdx_mcdi;
+
+ cdx_c = platform_get_drvdata(pdev);
+ cdx_mcdi = cdx_c->priv;
+
+ rproc_detach(cdx_mcdi->r5_rproc);
+ rproc_put(cdx_mcdi->r5_rproc);
+}
+
+static int cdx_rpmsg_cb(struct rpmsg_device *rpdev, void *data,
+ int len, void *priv, u32 src)
+{
+ struct cdx_controller *cdx_c = dev_get_drvdata(&rpdev->dev);
+ struct cdx_mcdi *cdx_mcdi = cdx_c->priv;
+
+ if (len > MCDI_BUF_LEN)
+ return -EINVAL;
+
+ cdx_mcdi_process_cmd(cdx_mcdi, (struct cdx_dword *)data, len);
+
+ return 0;
+}
+
+static void cdx_rpmsg_post_probe_work(struct work_struct *work)
+{
+ struct cdx_controller *cdx_c;
+ struct cdx_mcdi *cdx_mcdi;
+
+ cdx_mcdi = container_of(work, struct cdx_mcdi, work);
+ cdx_c = dev_get_drvdata(&cdx_mcdi->rpdev->dev);
+ cdx_rpmsg_post_probe(cdx_c);
+}
+
+static int cdx_rpmsg_probe(struct rpmsg_device *rpdev)
+{
+ struct rpmsg_channel_info chinfo = {0};
+ struct cdx_controller *cdx_c;
+ struct cdx_mcdi *cdx_mcdi;
+
+ cdx_c = (struct cdx_controller *)cdx_rpmsg_id_table[0].driver_data;
+ cdx_mcdi = cdx_c->priv;
+
+ chinfo.src = RPMSG_ADDR_ANY;
+ chinfo.dst = rpdev->dst;
+ strscpy(chinfo.name, cdx_rpmsg_id_table[0].name,
+ strlen(cdx_rpmsg_id_table[0].name));
+
+ cdx_mcdi->ept = rpmsg_create_ept(rpdev, cdx_rpmsg_cb, NULL, chinfo);
+ if (!cdx_mcdi->ept) {
+ dev_err_probe(&rpdev->dev, -ENXIO,
+ "Failed to create ept for channel %s\n",
+ chinfo.name);
+ return -EINVAL;
+ }
+
+ cdx_mcdi->rpdev = rpdev;
+ dev_set_drvdata(&rpdev->dev, cdx_c);
+
+ schedule_work(&cdx_mcdi->work);
+ return 0;
+}
+
+static void cdx_rpmsg_remove(struct rpmsg_device *rpdev)
+{
+ struct cdx_controller *cdx_c = dev_get_drvdata(&rpdev->dev);
+ struct cdx_mcdi *cdx_mcdi = cdx_c->priv;
+
+ flush_work(&cdx_mcdi->work);
+ cdx_rpmsg_pre_remove(cdx_c);
+
+ rpmsg_destroy_ept(cdx_mcdi->ept);
+ dev_set_drvdata(&rpdev->dev, NULL);
+}
+
+static struct rpmsg_driver cdx_rpmsg_driver = {
+ .drv.name = KBUILD_MODNAME,
+ .id_table = cdx_rpmsg_id_table,
+ .probe = cdx_rpmsg_probe,
+ .remove = cdx_rpmsg_remove,
+ .callback = cdx_rpmsg_cb,
+};
+
+int cdx_setup_rpmsg(struct platform_device *pdev)
+{
+ struct cdx_controller *cdx_c;
+ struct cdx_mcdi *cdx_mcdi;
+ int ret;
+
+ /* Attach to remote processor */
+ ret = cdx_attach_to_rproc(pdev);
+ if (ret)
+ return ret;
+
+ cdx_c = platform_get_drvdata(pdev);
+ cdx_mcdi = cdx_c->priv;
+
+ /* Register RPMsg driver */
+ cdx_rpmsg_id_table[0].driver_data = (kernel_ulong_t)cdx_c;
+
+ INIT_WORK(&cdx_mcdi->work, cdx_rpmsg_post_probe_work);
+ ret = register_rpmsg_driver(&cdx_rpmsg_driver);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to register cdx RPMsg driver: %d\n", ret);
+ cdx_detach_to_r5(pdev);
+ }
+
+ return ret;
+}
+
+void cdx_destroy_rpmsg(struct platform_device *pdev)
+{
+ unregister_rpmsg_driver(&cdx_rpmsg_driver);
+
+ cdx_detach_to_r5(pdev);
+}
diff --git a/drivers/cdx/controller/mc_cdx_pcol.h b/drivers/cdx/controller/mc_cdx_pcol.h
new file mode 100644
index 000000000000..4ccb7b52951b
--- /dev/null
+++ b/drivers/cdx/controller/mc_cdx_pcol.h
@@ -0,0 +1,590 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Driver for AMD network controllers and boards
+ *
+ * Copyright (C) 2021, Xilinx, Inc.
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef MC_CDX_PCOL_H
+#define MC_CDX_PCOL_H
+
+/* The current version of the MCDI protocol. */
+#define MCDI_PCOL_VERSION 2
+
+/*
+ * Each MCDI request starts with an MCDI_HEADER, which is a 32bit
+ * structure, filled in by the client.
+ *
+ * 0 7 8 16 20 22 23 24 31
+ * | CODE | R | LEN | SEQ | Rsvd | E | R | XFLAGS |
+ * | | |
+ * | | \--- Response
+ * | \------- Error
+ * \------------------------------ Resync (always set)
+ *
+ * The client writes its request into MC shared memory, and rings the
+ * doorbell. Each request is completed either by the MC writing
+ * back into shared memory, or by writing out an event.
+ *
+ * All MCDI commands support completion by shared memory response. Each
+ * request may also contain additional data (accounted for by HEADER.LEN),
+ * and some responses may also contain additional data (again, accounted
+ * for by HEADER.LEN).
+ *
+ * Some MCDI commands support completion by event, in which any associated
+ * response data is included in the event.
+ *
+ * The protocol requires one response to be delivered for every request; a
+ * request should not be sent unless the response for the previous request
+ * has been received (either by polling shared memory, or by receiving
+ * an event).
+ */
+
+/** Request/Response structure */
+#define MCDI_HEADER_OFST 0
+#define MCDI_HEADER_CODE_LBN 0
+#define MCDI_HEADER_CODE_WIDTH 7
+#define MCDI_HEADER_RESYNC_LBN 7
+#define MCDI_HEADER_RESYNC_WIDTH 1
+#define MCDI_HEADER_DATALEN_LBN 8
+#define MCDI_HEADER_DATALEN_WIDTH 8
+#define MCDI_HEADER_SEQ_LBN 16
+#define MCDI_HEADER_SEQ_WIDTH 4
+#define MCDI_HEADER_RSVD_LBN 20
+#define MCDI_HEADER_RSVD_WIDTH 1
+#define MCDI_HEADER_NOT_EPOCH_LBN 21
+#define MCDI_HEADER_NOT_EPOCH_WIDTH 1
+#define MCDI_HEADER_ERROR_LBN 22
+#define MCDI_HEADER_ERROR_WIDTH 1
+#define MCDI_HEADER_RESPONSE_LBN 23
+#define MCDI_HEADER_RESPONSE_WIDTH 1
+#define MCDI_HEADER_XFLAGS_LBN 24
+#define MCDI_HEADER_XFLAGS_WIDTH 8
+/* Request response using event */
+#define MCDI_HEADER_XFLAGS_EVREQ 0x01
+/* Request (and signal) early doorbell return */
+#define MCDI_HEADER_XFLAGS_DBRET 0x02
+
+/* Maximum number of payload bytes */
+#define MCDI_CTL_SDU_LEN_MAX_V2 0x400
+
+#define MCDI_CTL_SDU_LEN_MAX MCDI_CTL_SDU_LEN_MAX_V2
+
+/*
+ * The MC can generate events for two reasons:
+ * - To advance a shared memory request if XFLAGS_EVREQ was set
+ * - As a notification (link state, i2c event), controlled
+ * via MC_CMD_LOG_CTRL
+ *
+ * Both events share a common structure:
+ *
+ * 0 32 33 36 44 52 60
+ * | Data | Cont | Level | Src | Code | Rsvd |
+ * |
+ * \ There is another event pending in this notification
+ *
+ * If Code==CMDDONE, then the fields are further interpreted as:
+ *
+ * - LEVEL==INFO Command succeeded
+ * - LEVEL==ERR Command failed
+ *
+ * 0 8 16 24 32
+ * | Seq | Datalen | Errno | Rsvd |
+ *
+ * These fields are taken directly out of the standard MCDI header, i.e.,
+ * LEVEL==ERR, Datalen == 0 => Reboot
+ *
+ * Events can be squirted out of the UART (using LOG_CTRL) without a
+ * MCDI header. An event can be distinguished from a MCDI response by
+ * examining the first byte which is 0xc0. This corresponds to the
+ * non-existent MCDI command MC_CMD_DEBUG_LOG.
+ *
+ * 0 7 8
+ * | command | Resync | = 0xc0
+ *
+ * Since the event is written in big-endian byte order, this works
+ * providing bits 56-63 of the event are 0xc0.
+ *
+ * 56 60 63
+ * | Rsvd | Code | = 0xc0
+ *
+ * Which means for convenience the event code is 0xc for all MC
+ * generated events.
+ */
+
+/*
+ * the errno value may be followed by the (0-based) number of the
+ * first argument that could not be processed.
+ */
+#define MC_CMD_ERR_ARG_OFST 4
+
+/* MC_CMD_ERR MCDI error codes. */
+/* Operation not permitted. */
+#define MC_CMD_ERR_EPERM 0x1
+/* Non-existent command target */
+#define MC_CMD_ERR_ENOENT 0x2
+/* assert() has killed the MC */
+#define MC_CMD_ERR_EINTR 0x4
+/* I/O failure */
+#define MC_CMD_ERR_EIO 0x5
+/* Already exists */
+#define MC_CMD_ERR_EEXIST 0x6
+/* Try again */
+#define MC_CMD_ERR_EAGAIN 0xb
+/* Out of memory */
+#define MC_CMD_ERR_ENOMEM 0xc
+/* Caller does not hold required locks */
+#define MC_CMD_ERR_EACCES 0xd
+/* Resource is currently unavailable (e.g. lock contention) */
+#define MC_CMD_ERR_EBUSY 0x10
+/* No such device */
+#define MC_CMD_ERR_ENODEV 0x13
+/* Invalid argument to target */
+#define MC_CMD_ERR_EINVAL 0x16
+/* No space */
+#define MC_CMD_ERR_ENOSPC 0x1c
+/* Read-only */
+#define MC_CMD_ERR_EROFS 0x1e
+/* Broken pipe */
+#define MC_CMD_ERR_EPIPE 0x20
+/* Out of range */
+#define MC_CMD_ERR_ERANGE 0x22
+/* Non-recursive resource is already acquired */
+#define MC_CMD_ERR_EDEADLK 0x23
+/* Operation not implemented */
+#define MC_CMD_ERR_ENOSYS 0x26
+/* Operation timed out */
+#define MC_CMD_ERR_ETIME 0x3e
+/* Link has been severed */
+#define MC_CMD_ERR_ENOLINK 0x43
+/* Protocol error */
+#define MC_CMD_ERR_EPROTO 0x47
+/* Bad message */
+#define MC_CMD_ERR_EBADMSG 0x4a
+/* Operation not supported */
+#define MC_CMD_ERR_ENOTSUP 0x5f
+/* Address not available */
+#define MC_CMD_ERR_EADDRNOTAVAIL 0x63
+/* Not connected */
+#define MC_CMD_ERR_ENOTCONN 0x6b
+/* Operation already in progress */
+#define MC_CMD_ERR_EALREADY 0x72
+/* Stale handle. The handle references resource that no longer exists */
+#define MC_CMD_ERR_ESTALE 0x74
+/* Resource allocation failed. */
+#define MC_CMD_ERR_ALLOC_FAIL 0x1000
+/* V-adaptor not found. */
+#define MC_CMD_ERR_NO_VADAPTOR 0x1001
+/* EVB port not found. */
+#define MC_CMD_ERR_NO_EVB_PORT 0x1002
+/* V-switch not found. */
+#define MC_CMD_ERR_NO_VSWITCH 0x1003
+/* Too many VLAN tags. */
+#define MC_CMD_ERR_VLAN_LIMIT 0x1004
+/* Bad PCI function number. */
+#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005
+/* Invalid VLAN mode. */
+#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006
+/* Invalid v-switch type. */
+#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007
+/* Invalid v-port type. */
+#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008
+/* MAC address exists. */
+#define MC_CMD_ERR_MAC_EXIST 0x1009
+/* Slave core not present */
+#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a
+/* The datapath is disabled. */
+#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b
+/* The requesting client is not a function */
+#define MC_CMD_ERR_CLIENT_NOT_FN 0x100c
+/*
+ * The requested operation might require the command to be passed between
+ * MCs, and the transport doesn't support that. Should only ever been seen over
+ * the UART.
+ */
+#define MC_CMD_ERR_NO_PRIVILEGE 0x1013
+/*
+ * Workaround 26807 could not be turned on/off because some functions
+ * have already installed filters. See the comment at
+ * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as
+ * sub-variant switching.
+ */
+#define MC_CMD_ERR_FILTERS_PRESENT 0x1014
+/* The clock whose frequency you've attempted to set doesn't exist */
+#define MC_CMD_ERR_NO_CLOCK 0x1015
+/*
+ * Returned by MC_CMD_TESTASSERT if the action that should have caused an
+ * assertion failed to do so.
+ */
+#define MC_CMD_ERR_UNREACHABLE 0x1016
+/*
+ * This command needs to be processed in the background but there were no
+ * resources to do so. Send it again after a command has completed.
+ */
+#define MC_CMD_ERR_QUEUE_FULL 0x1017
+/*
+ * The operation could not be completed because the PCIe link has gone
+ * away. This error code is never expected to be returned over the TLP
+ * transport.
+ */
+#define MC_CMD_ERR_NO_PCIE 0x1018
+/*
+ * The operation could not be completed because the datapath has gone
+ * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the
+ * datapath absence may be temporary
+ */
+#define MC_CMD_ERR_NO_DATAPATH 0x1019
+/* The operation could not complete because some VIs are allocated */
+#define MC_CMD_ERR_VIS_PRESENT 0x101a
+/*
+ * The operation could not complete because some PIO buffers are
+ * allocated
+ */
+#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b
+
+/***********************************/
+/*
+ * MC_CMD_CDX_BUS_ENUM_BUSES
+ * CDX bus hosts devices (functions) that are implemented using the Composable
+ * DMA subsystem and directly mapped into the memory space of the FGPA PSX
+ * Application Processors (APUs). As such, they only apply to the PSX APU side,
+ * not the host (PCIe). Unlike PCIe, these devices have no native configuration
+ * space or enumeration mechanism, so this message set provides a minimal
+ * interface for discovery and management (bus reset, FLR, BME) of such
+ * devices. This command returns the number of CDX buses present in the system.
+ */
+#define MC_CMD_CDX_BUS_ENUM_BUSES 0x1
+#define MC_CMD_CDX_BUS_ENUM_BUSES_MSGSET 0x1
+#undef MC_CMD_0x1_PRIVILEGE_CTG
+
+#define MC_CMD_0x1_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_BUS_ENUM_BUSES_IN msgrequest */
+#define MC_CMD_CDX_BUS_ENUM_BUSES_IN_LEN 0
+
+/* MC_CMD_CDX_BUS_ENUM_BUSES_OUT msgresponse */
+#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN 4
+/*
+ * Number of CDX buses present in the system. Buses are numbered 0 to
+ * BUS_COUNT-1
+ */
+#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_OFST 0
+#define MC_CMD_CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT_LEN 4
+
+/***********************************/
+/*
+ * MC_CMD_CDX_BUS_ENUM_DEVICES
+ * Enumerate CDX bus devices on a given bus
+ */
+#define MC_CMD_CDX_BUS_ENUM_DEVICES 0x2
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_MSGSET 0x2
+#undef MC_CMD_0x2_PRIVILEGE_CTG
+
+#define MC_CMD_0x2_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_BUS_ENUM_DEVICES_IN msgrequest */
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN 4
+/*
+ * Bus number to enumerate, in range 0 to BUS_COUNT-1, as returned by
+ * MC_CMD_CDX_BUS_ENUM_BUSES_OUT
+ */
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_OFST 0
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_IN_BUS_LEN 4
+
+/* MC_CMD_CDX_BUS_ENUM_DEVICES_OUT msgresponse */
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN 4
+/*
+ * Number of devices present on the bus. Devices on the bus are numbered 0 to
+ * DEVICE_COUNT-1. Returns EAGAIN if number of devices unknown or if the target
+ * devices are not ready (e.g. undergoing a bus reset)
+ */
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_OFST 0
+#define MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT_LEN 4
+
+/***********************************/
+/*
+ * MC_CMD_CDX_BUS_GET_DEVICE_CONFIG
+ * Returns device identification and MMIO/MSI resource data for a CDX device.
+ * The expected usage is for the caller to first retrieve the number of devices
+ * on the bus using MC_CMD_BUS_ENUM_DEVICES, then loop through the range (0,
+ * DEVICE_COUNT - 1), retrieving device resource data. May return EAGAIN if the
+ * number of exposed devices or device resources change during enumeration (due
+ * to e.g. a PL reload / bus reset), in which case the caller is expected to
+ * restart the enumeration loop. MMIO addresses are specified in terms of bus
+ * addresses (prior to any potential IOMMU translation). For versal-net, these
+ * are equivalent to APU physical addresses. Implementation note - for this to
+ * work, the implementation needs to keep state (generation count) per client.
+ */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG 0x3
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_MSGSET 0x3
+#undef MC_CMD_0x3_PRIVILEGE_CTG
+
+#define MC_CMD_0x3_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN msgrequest */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN 8
+/* Device bus number, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_OFST 0
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_BUS_LEN 4
+/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_OFST 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE_LEN 4
+
+/* MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT msgresponse */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN 88
+/* 16-bit Vendor identifier, compliant with PCI-SIG VendorID assignment. */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_OFST 0
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID_LEN 2
+/* 16-bit Device ID assigned by the vendor */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_OFST 2
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID_LEN 2
+/*
+ * 16-bit Subsystem Vendor ID, , compliant with PCI-SIG VendorID assignment.
+ * For further device differentiation, as required. 0 if unused.
+ */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_OFST 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_VENDOR_ID_LEN 2
+/*
+ * 16-bit Subsystem Device ID assigned by the vendor. For further device
+ * differentiation, as required. 0 if unused.
+ */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_OFST 6
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_SUBSYS_DEVICE_ID_LEN 2
+/* 24-bit Device Class code, compliant with PCI-SIG Device Class codes */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_OFST 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_CLASS_LEN 3
+/* 8-bit vendor-assigned revision */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_OFST 11
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_REVISION_LEN 1
+/* Reserved (alignment) */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_OFST 12
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_RESERVED_LEN 4
+/* MMIO region 0 base address (bus address), 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_OFST 16
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_OFST 16
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_LBN 128
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_OFST 20
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_LBN 160
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE_HI_WIDTH 32
+/* MMIO region 0 size, 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_OFST 24
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_OFST 24
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_LBN 192
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_OFST 28
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_LBN 224
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE_HI_WIDTH 32
+/* MMIO region 1 base address (bus address), 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_OFST 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_OFST 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_LBN 256
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_OFST 36
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_LBN 288
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE_HI_WIDTH 32
+/* MMIO region 1 size, 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_OFST 40
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_OFST 40
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_LBN 320
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_OFST 44
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_LBN 352
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE_HI_WIDTH 32
+/* MMIO region 2 base address (bus address), 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_OFST 48
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_OFST 48
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_LBN 384
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_OFST 52
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_LBN 416
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE_HI_WIDTH 32
+/* MMIO region 2 size, 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_OFST 56
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_OFST 56
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_LBN 448
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_OFST 60
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_LBN 480
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE_HI_WIDTH 32
+/* MMIO region 3 base address (bus address), 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_OFST 64
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_OFST 64
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_LBN 512
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_OFST 68
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_LBN 544
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE_HI_WIDTH 32
+/* MMIO region 3 size, 0 if unused */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_OFST 72
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LEN 8
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_OFST 72
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_LBN 576
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_LO_WIDTH 32
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_OFST 76
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LEN 4
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_LBN 608
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE_HI_WIDTH 32
+/* MSI vector count */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_OFST 80
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_MSI_COUNT_LEN 4
+/* Requester ID used by device (SMMU StreamID, GIC ITS DeviceID) */
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_OFST 84
+#define MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID_LEN 4
+
+/***********************************/
+/*
+ * MC_CMD_CDX_DEVICE_RESET
+ * After this call completes, device DMA and interrupts are quiesced, devices
+ * logic is reset in a hardware-specific way and DMA bus mastering is disabled.
+ */
+#define MC_CMD_CDX_DEVICE_RESET 0x6
+#define MC_CMD_CDX_DEVICE_RESET_MSGSET 0x6
+#undef MC_CMD_0x6_PRIVILEGE_CTG
+
+#define MC_CMD_0x6_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_DEVICE_RESET_IN msgrequest */
+#define MC_CMD_CDX_DEVICE_RESET_IN_LEN 8
+/* Device bus number, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_OFST 0
+#define MC_CMD_CDX_DEVICE_RESET_IN_BUS_LEN 4
+/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */
+#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_OFST 4
+#define MC_CMD_CDX_DEVICE_RESET_IN_DEVICE_LEN 4
+
+/*
+ * MC_CMD_CDX_DEVICE_RESET_OUT msgresponse: The device is quiesced and all
+ * pending device initiated DMA has completed.
+ */
+#define MC_CMD_CDX_DEVICE_RESET_OUT_LEN 0
+
+/***********************************/
+/*
+ * MC_CMD_CDX_DEVICE_CONTROL_SET
+ * If BUS_MASTER is set to disabled, device DMA and interrupts are quiesced.
+ * Pending DMA requests and MSI interrupts are flushed and no further DMA or
+ * interrupts are issued after this command returns. If BUS_MASTER is set to
+ * enabled, device is allowed to initiate DMA. Whether interrupts are enabled
+ * also depends on the value of MSI_ENABLE bit. Note that, in this case, the
+ * device may start DMA before the host receives and processes the MCDI
+ * response. MSI_ENABLE masks or unmasks device interrupts only. Note that for
+ * interrupts to be delivered to the host, both BUS_MASTER and MSI_ENABLE needs
+ * to be set. MMIO_REGIONS_ENABLE enables or disables host accesses to device
+ * MMIO regions. Note that an implementation is allowed to permanently set this
+ * bit to 1, in which case MC_CMD_CDX_DEVICE_CONTROL_GET will always return 1
+ * for this bit, regardless of the value set here.
+ */
+#define MC_CMD_CDX_DEVICE_CONTROL_SET 0x7
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_MSGSET 0x7
+#undef MC_CMD_0x7_PRIVILEGE_CTG
+
+#define MC_CMD_0x7_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_DEVICE_CONTROL_SET_IN msgrequest */
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_LEN 12
+/* Device bus number, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_LEN 4
+/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_OFST 4
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_DEVICE_LEN 4
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_OFST 8
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_FLAGS_LEN 4
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_OFST 8
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_LBN 0
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_BUS_MASTER_ENABLE_WIDTH 1
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_OFST 8
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_LBN 1
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MSI_ENABLE_WIDTH 1
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_OFST 8
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_LBN 2
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_IN_MMIO_REGIONS_ENABLE_WIDTH 1
+
+/* MC_CMD_CDX_DEVICE_CONTROL_SET_OUT msgresponse */
+#define MC_CMD_CDX_DEVICE_CONTROL_SET_OUT_LEN 0
+
+/***********************************/
+/*
+ * MC_CMD_CDX_DEVICE_CONTROL_GET
+ * Returns device DMA, interrupt and MMIO region access control bits. See
+ * MC_CMD_CDX_DEVICE_CONTROL_SET for definition of the available control bits.
+ */
+#define MC_CMD_CDX_DEVICE_CONTROL_GET 0x8
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_MSGSET 0x8
+#undef MC_CMD_0x8_PRIVILEGE_CTG
+
+#define MC_CMD_0x8_PRIVILEGE_CTG SRIOV_CTG_ADMIN
+
+/* MC_CMD_CDX_DEVICE_CONTROL_GET_IN msgrequest */
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_LEN 8
+/* Device bus number, in range 0 to BUS_COUNT-1 */
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_BUS_LEN 4
+/* Device number relative to the bus, in range 0 to DEVICE_COUNT-1 for that bus */
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_OFST 4
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_IN_DEVICE_LEN 4
+
+/* MC_CMD_CDX_DEVICE_CONTROL_GET_OUT msgresponse */
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_LEN 4
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_FLAGS_LEN 4
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_LBN 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_BUS_MASTER_ENABLE_WIDTH 1
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_LBN 1
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MSI_ENABLE_WIDTH 1
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_OFST 0
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_LBN 2
+#define MC_CMD_CDX_DEVICE_CONTROL_GET_OUT_MMIO_REGIONS_ENABLE_WIDTH 1
+
+/***********************************/
+/* MC_CMD_V2_EXTN - Encapsulation for a v2 extended command */
+#define MC_CMD_V2_EXTN 0x7f
+
+/* MC_CMD_V2_EXTN_IN msgrequest */
+#define MC_CMD_V2_EXTN_IN_LEN 4
+/* the extended command number */
+#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_LBN 0
+#define MC_CMD_V2_EXTN_IN_EXTENDED_CMD_WIDTH 15
+#define MC_CMD_V2_EXTN_IN_UNUSED_LBN 15
+#define MC_CMD_V2_EXTN_IN_UNUSED_WIDTH 1
+/* the actual length of the encapsulated command */
+#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_LBN 16
+#define MC_CMD_V2_EXTN_IN_ACTUAL_LEN_WIDTH 10
+#define MC_CMD_V2_EXTN_IN_UNUSED2_LBN 26
+#define MC_CMD_V2_EXTN_IN_UNUSED2_WIDTH 2
+/* Type of command/response */
+#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_LBN 28
+#define MC_CMD_V2_EXTN_IN_MESSAGE_TYPE_WIDTH 4
+/*
+ * enum: MCDI command directed to versal-net. MCDI responses of this type
+ * are not defined.
+ */
+#define MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM 0x2
+
+#endif /* MC_CDX_PCOL_H */
diff --git a/drivers/cdx/controller/mcdi.c b/drivers/cdx/controller/mcdi.c
new file mode 100644
index 000000000000..a211a2ca762e
--- /dev/null
+++ b/drivers/cdx/controller/mcdi.c
@@ -0,0 +1,903 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Management-Controller-to-Driver Interface
+ *
+ * Copyright 2008-2013 Solarflare Communications Inc.
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/device.h>
+#include <linux/rwsem.h>
+#include <linux/vmalloc.h>
+#include <net/netevent.h>
+#include <linux/log2.h>
+#include <linux/net_tstamp.h>
+#include <linux/wait.h>
+
+#include "bitfield.h"
+#include "mcdi.h"
+
+struct cdx_mcdi_copy_buffer {
+ struct cdx_dword buffer[DIV_ROUND_UP(MCDI_CTL_SDU_LEN_MAX, 4)];
+};
+
+#ifdef CONFIG_MCDI_LOGGING
+#define LOG_LINE_MAX (1024 - 32)
+#endif
+
+static void cdx_mcdi_cancel_cmd(struct cdx_mcdi *cdx, struct cdx_mcdi_cmd *cmd);
+static void cdx_mcdi_wait_for_cleanup(struct cdx_mcdi *cdx);
+static int cdx_mcdi_rpc_async_internal(struct cdx_mcdi *cdx,
+ struct cdx_mcdi_cmd *cmd,
+ unsigned int *handle);
+static void cdx_mcdi_start_or_queue(struct cdx_mcdi_iface *mcdi,
+ bool allow_retry);
+static void cdx_mcdi_cmd_start_or_queue(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd);
+static bool cdx_mcdi_complete_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct cdx_dword *outbuf,
+ int len,
+ struct list_head *cleanup_list);
+static void cdx_mcdi_timeout_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct list_head *cleanup_list);
+static void cdx_mcdi_cmd_work(struct work_struct *context);
+static void cdx_mcdi_mode_fail(struct cdx_mcdi *cdx, struct list_head *cleanup_list);
+static void _cdx_mcdi_display_error(struct cdx_mcdi *cdx, unsigned int cmd,
+ size_t inlen, int raw, int arg, int err_no);
+
+static bool cdx_cmd_cancelled(struct cdx_mcdi_cmd *cmd)
+{
+ return cmd->state == MCDI_STATE_RUNNING_CANCELLED;
+}
+
+static void cdx_mcdi_cmd_release(struct kref *ref)
+{
+ kfree(container_of(ref, struct cdx_mcdi_cmd, ref));
+}
+
+static unsigned int cdx_mcdi_cmd_handle(struct cdx_mcdi_cmd *cmd)
+{
+ return cmd->handle;
+}
+
+static void _cdx_mcdi_remove_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct list_head *cleanup_list)
+{
+ /* if cancelled, the completers have already been called */
+ if (cdx_cmd_cancelled(cmd))
+ return;
+
+ if (cmd->completer) {
+ list_add_tail(&cmd->cleanup_list, cleanup_list);
+ ++mcdi->outstanding_cleanups;
+ kref_get(&cmd->ref);
+ }
+}
+
+static void cdx_mcdi_remove_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct list_head *cleanup_list)
+{
+ list_del(&cmd->list);
+ _cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list);
+ cmd->state = MCDI_STATE_FINISHED;
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ if (list_empty(&mcdi->cmd_list))
+ wake_up(&mcdi->cmd_complete_wq);
+}
+
+static unsigned long cdx_mcdi_rpc_timeout(struct cdx_mcdi *cdx, unsigned int cmd)
+{
+ if (!cdx->mcdi_ops->mcdi_rpc_timeout)
+ return MCDI_RPC_TIMEOUT;
+ else
+ return cdx->mcdi_ops->mcdi_rpc_timeout(cdx, cmd);
+}
+
+int cdx_mcdi_init(struct cdx_mcdi *cdx)
+{
+ struct cdx_mcdi_iface *mcdi;
+ int rc = -ENOMEM;
+
+ cdx->mcdi = kzalloc(sizeof(*cdx->mcdi), GFP_KERNEL);
+ if (!cdx->mcdi)
+ goto fail;
+
+ mcdi = cdx_mcdi_if(cdx);
+ mcdi->cdx = cdx;
+
+#ifdef CONFIG_MCDI_LOGGING
+ mcdi->logging_buffer = kmalloc(LOG_LINE_MAX, GFP_KERNEL);
+ if (!mcdi->logging_buffer)
+ goto fail2;
+#endif
+ mcdi->workqueue = alloc_ordered_workqueue("mcdi_wq", 0);
+ if (!mcdi->workqueue)
+ goto fail3;
+ mutex_init(&mcdi->iface_lock);
+ mcdi->mode = MCDI_MODE_EVENTS;
+ INIT_LIST_HEAD(&mcdi->cmd_list);
+ init_waitqueue_head(&mcdi->cmd_complete_wq);
+
+ mcdi->new_epoch = true;
+
+ return 0;
+fail3:
+#ifdef CONFIG_MCDI_LOGGING
+ kfree(mcdi->logging_buffer);
+fail2:
+#endif
+ kfree(cdx->mcdi);
+ cdx->mcdi = NULL;
+fail:
+ return rc;
+}
+
+void cdx_mcdi_finish(struct cdx_mcdi *cdx)
+{
+ struct cdx_mcdi_iface *mcdi;
+
+ mcdi = cdx_mcdi_if(cdx);
+ if (!mcdi)
+ return;
+
+ cdx_mcdi_wait_for_cleanup(cdx);
+
+#ifdef CONFIG_MCDI_LOGGING
+ kfree(mcdi->logging_buffer);
+#endif
+
+ destroy_workqueue(mcdi->workqueue);
+ kfree(cdx->mcdi);
+ cdx->mcdi = NULL;
+}
+
+static bool cdx_mcdi_flushed(struct cdx_mcdi_iface *mcdi, bool ignore_cleanups)
+{
+ bool flushed;
+
+ mutex_lock(&mcdi->iface_lock);
+ flushed = list_empty(&mcdi->cmd_list) &&
+ (ignore_cleanups || !mcdi->outstanding_cleanups);
+ mutex_unlock(&mcdi->iface_lock);
+ return flushed;
+}
+
+/* Wait for outstanding MCDI commands to complete. */
+static void cdx_mcdi_wait_for_cleanup(struct cdx_mcdi *cdx)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+
+ if (!mcdi)
+ return;
+
+ wait_event(mcdi->cmd_complete_wq,
+ cdx_mcdi_flushed(mcdi, false));
+}
+
+int cdx_mcdi_wait_for_quiescence(struct cdx_mcdi *cdx,
+ unsigned int timeout_jiffies)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
+ int rc = 0;
+
+ if (!mcdi)
+ return -EINVAL;
+
+ flush_workqueue(mcdi->workqueue);
+
+ add_wait_queue(&mcdi->cmd_complete_wq, &wait);
+
+ while (!cdx_mcdi_flushed(mcdi, true)) {
+ rc = wait_woken(&wait, TASK_IDLE, timeout_jiffies);
+ if (rc)
+ continue;
+ break;
+ }
+
+ remove_wait_queue(&mcdi->cmd_complete_wq, &wait);
+
+ if (rc > 0)
+ rc = 0;
+ else if (rc == 0)
+ rc = -ETIMEDOUT;
+
+ return rc;
+}
+
+static u8 cdx_mcdi_payload_csum(const struct cdx_dword *hdr, size_t hdr_len,
+ const struct cdx_dword *sdu, size_t sdu_len)
+{
+ u8 *p = (u8 *)hdr;
+ u8 csum = 0;
+ int i;
+
+ for (i = 0; i < hdr_len; i++)
+ csum += p[i];
+
+ p = (u8 *)sdu;
+ for (i = 0; i < sdu_len; i++)
+ csum += p[i];
+
+ return ~csum & 0xff;
+}
+
+static void cdx_mcdi_send_request(struct cdx_mcdi *cdx,
+ struct cdx_mcdi_cmd *cmd)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+ const struct cdx_dword *inbuf = cmd->inbuf;
+ size_t inlen = cmd->inlen;
+ struct cdx_dword hdr[2];
+ size_t hdr_len;
+ bool not_epoch;
+ u32 xflags;
+#ifdef CONFIG_MCDI_LOGGING
+ char *buf;
+#endif
+
+ if (!mcdi)
+ return;
+#ifdef CONFIG_MCDI_LOGGING
+ buf = mcdi->logging_buffer; /* page-sized */
+#endif
+
+ mcdi->prev_seq = cmd->seq;
+ mcdi->seq_held_by[cmd->seq] = cmd;
+ mcdi->db_held_by = cmd;
+ cmd->started = jiffies;
+
+ not_epoch = !mcdi->new_epoch;
+ xflags = 0;
+
+ /* MCDI v2 */
+ WARN_ON(inlen > MCDI_CTL_SDU_LEN_MAX_V2);
+ CDX_POPULATE_DWORD_7(hdr[0],
+ MCDI_HEADER_RESPONSE, 0,
+ MCDI_HEADER_RESYNC, 1,
+ MCDI_HEADER_CODE, MC_CMD_V2_EXTN,
+ MCDI_HEADER_DATALEN, 0,
+ MCDI_HEADER_SEQ, cmd->seq,
+ MCDI_HEADER_XFLAGS, xflags,
+ MCDI_HEADER_NOT_EPOCH, not_epoch);
+ CDX_POPULATE_DWORD_3(hdr[1],
+ MC_CMD_V2_EXTN_IN_EXTENDED_CMD, cmd->cmd,
+ MC_CMD_V2_EXTN_IN_ACTUAL_LEN, inlen,
+ MC_CMD_V2_EXTN_IN_MESSAGE_TYPE,
+ MC_CMD_V2_EXTN_IN_MCDI_MESSAGE_TYPE_PLATFORM);
+ hdr_len = 8;
+
+#ifdef CONFIG_MCDI_LOGGING
+ if (!WARN_ON_ONCE(!buf)) {
+ const struct cdx_dword *frags[] = { hdr, inbuf };
+ const size_t frag_len[] = { hdr_len, round_up(inlen, 4) };
+ int bytes = 0;
+ int i, j;
+
+ for (j = 0; j < ARRAY_SIZE(frags); j++) {
+ const struct cdx_dword *frag;
+
+ frag = frags[j];
+ for (i = 0;
+ i < frag_len[j] / 4;
+ i++) {
+ /*
+ * Do not exceed the internal printk limit.
+ * The string before that is just over 70 bytes.
+ */
+ if ((bytes + 75) > LOG_LINE_MAX) {
+ pr_info("MCDI RPC REQ:%s \\\n", buf);
+ bytes = 0;
+ }
+ bytes += snprintf(buf + bytes,
+ LOG_LINE_MAX - bytes, " %08x",
+ le32_to_cpu(frag[i].cdx_u32));
+ }
+ }
+
+ pr_info("MCDI RPC REQ:%s\n", buf);
+ }
+#endif
+ hdr[0].cdx_u32 |= (__force __le32)(cdx_mcdi_payload_csum(hdr, hdr_len, inbuf, inlen) <<
+ MCDI_HEADER_XFLAGS_LBN);
+ cdx->mcdi_ops->mcdi_request(cdx, hdr, hdr_len, inbuf, inlen);
+
+ mcdi->new_epoch = false;
+}
+
+static int cdx_mcdi_errno(struct cdx_mcdi *cdx, unsigned int mcdi_err)
+{
+ switch (mcdi_err) {
+ case 0:
+ case MC_CMD_ERR_QUEUE_FULL:
+ return mcdi_err;
+ case MC_CMD_ERR_EPERM:
+ return -EPERM;
+ case MC_CMD_ERR_ENOENT:
+ return -ENOENT;
+ case MC_CMD_ERR_EINTR:
+ return -EINTR;
+ case MC_CMD_ERR_EAGAIN:
+ return -EAGAIN;
+ case MC_CMD_ERR_EACCES:
+ return -EACCES;
+ case MC_CMD_ERR_EBUSY:
+ return -EBUSY;
+ case MC_CMD_ERR_EINVAL:
+ return -EINVAL;
+ case MC_CMD_ERR_ERANGE:
+ return -ERANGE;
+ case MC_CMD_ERR_EDEADLK:
+ return -EDEADLK;
+ case MC_CMD_ERR_ENOSYS:
+ return -EOPNOTSUPP;
+ case MC_CMD_ERR_ETIME:
+ return -ETIME;
+ case MC_CMD_ERR_EALREADY:
+ return -EALREADY;
+ case MC_CMD_ERR_ENOSPC:
+ return -ENOSPC;
+ case MC_CMD_ERR_ENOMEM:
+ return -ENOMEM;
+ case MC_CMD_ERR_ENOTSUP:
+ return -EOPNOTSUPP;
+ case MC_CMD_ERR_ALLOC_FAIL:
+ return -ENOBUFS;
+ case MC_CMD_ERR_MAC_EXIST:
+ return -EADDRINUSE;
+ case MC_CMD_ERR_NO_EVB_PORT:
+ return -EAGAIN;
+ default:
+ return -EPROTO;
+ }
+}
+
+static void cdx_mcdi_process_cleanup_list(struct cdx_mcdi *cdx,
+ struct list_head *cleanup_list)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+ unsigned int cleanups = 0;
+
+ if (!mcdi)
+ return;
+
+ while (!list_empty(cleanup_list)) {
+ struct cdx_mcdi_cmd *cmd =
+ list_first_entry(cleanup_list,
+ struct cdx_mcdi_cmd, cleanup_list);
+ cmd->completer(cdx, cmd->cookie, cmd->rc,
+ cmd->outbuf, cmd->outlen);
+ list_del(&cmd->cleanup_list);
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ ++cleanups;
+ }
+
+ if (cleanups) {
+ bool all_done;
+
+ mutex_lock(&mcdi->iface_lock);
+ CDX_WARN_ON_PARANOID(cleanups > mcdi->outstanding_cleanups);
+ all_done = (mcdi->outstanding_cleanups -= cleanups) == 0;
+ mutex_unlock(&mcdi->iface_lock);
+ if (all_done)
+ wake_up(&mcdi->cmd_complete_wq);
+ }
+}
+
+static void _cdx_mcdi_cancel_cmd(struct cdx_mcdi_iface *mcdi,
+ unsigned int handle,
+ struct list_head *cleanup_list)
+{
+ struct cdx_mcdi_cmd *cmd;
+
+ list_for_each_entry(cmd, &mcdi->cmd_list, list)
+ if (cdx_mcdi_cmd_handle(cmd) == handle) {
+ switch (cmd->state) {
+ case MCDI_STATE_QUEUED:
+ case MCDI_STATE_RETRY:
+ pr_debug("command %#x inlen %zu cancelled in queue\n",
+ cmd->cmd, cmd->inlen);
+ /* if not yet running, properly cancel it */
+ cmd->rc = -EPIPE;
+ cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list);
+ break;
+ case MCDI_STATE_RUNNING:
+ case MCDI_STATE_RUNNING_CANCELLED:
+ case MCDI_STATE_FINISHED:
+ default:
+ /* invalid state? */
+ WARN_ON(1);
+ }
+ break;
+ }
+}
+
+static void cdx_mcdi_cancel_cmd(struct cdx_mcdi *cdx, struct cdx_mcdi_cmd *cmd)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+ LIST_HEAD(cleanup_list);
+
+ if (!mcdi)
+ return;
+
+ mutex_lock(&mcdi->iface_lock);
+ cdx_mcdi_timeout_cmd(mcdi, cmd, &cleanup_list);
+ mutex_unlock(&mcdi->iface_lock);
+ cdx_mcdi_process_cleanup_list(cdx, &cleanup_list);
+}
+
+struct cdx_mcdi_blocking_data {
+ struct kref ref;
+ bool done;
+ wait_queue_head_t wq;
+ int rc;
+ struct cdx_dword *outbuf;
+ size_t outlen;
+ size_t outlen_actual;
+};
+
+static void cdx_mcdi_blocking_data_release(struct kref *ref)
+{
+ kfree(container_of(ref, struct cdx_mcdi_blocking_data, ref));
+}
+
+static void cdx_mcdi_rpc_completer(struct cdx_mcdi *cdx, unsigned long cookie,
+ int rc, struct cdx_dword *outbuf,
+ size_t outlen_actual)
+{
+ struct cdx_mcdi_blocking_data *wait_data =
+ (struct cdx_mcdi_blocking_data *)cookie;
+
+ wait_data->rc = rc;
+ memcpy(wait_data->outbuf, outbuf,
+ min(outlen_actual, wait_data->outlen));
+ wait_data->outlen_actual = outlen_actual;
+ /* memory barrier */
+ smp_wmb();
+ wait_data->done = true;
+ wake_up(&wait_data->wq);
+ kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release);
+}
+
+static int cdx_mcdi_rpc_sync(struct cdx_mcdi *cdx, unsigned int cmd,
+ const struct cdx_dword *inbuf, size_t inlen,
+ struct cdx_dword *outbuf, size_t outlen,
+ size_t *outlen_actual, bool quiet)
+{
+ struct cdx_mcdi_blocking_data *wait_data;
+ struct cdx_mcdi_cmd *cmd_item;
+ unsigned int handle;
+ int rc;
+
+ if (outlen_actual)
+ *outlen_actual = 0;
+
+ wait_data = kmalloc(sizeof(*wait_data), GFP_KERNEL);
+ if (!wait_data)
+ return -ENOMEM;
+
+ cmd_item = kmalloc(sizeof(*cmd_item), GFP_KERNEL);
+ if (!cmd_item) {
+ kfree(wait_data);
+ return -ENOMEM;
+ }
+
+ kref_init(&wait_data->ref);
+ wait_data->done = false;
+ init_waitqueue_head(&wait_data->wq);
+ wait_data->outbuf = outbuf;
+ wait_data->outlen = outlen;
+
+ kref_init(&cmd_item->ref);
+ cmd_item->quiet = quiet;
+ cmd_item->cookie = (unsigned long)wait_data;
+ cmd_item->completer = &cdx_mcdi_rpc_completer;
+ cmd_item->cmd = cmd;
+ cmd_item->inlen = inlen;
+ cmd_item->inbuf = inbuf;
+
+ /* Claim an extra reference for the completer to put. */
+ kref_get(&wait_data->ref);
+ rc = cdx_mcdi_rpc_async_internal(cdx, cmd_item, &handle);
+ if (rc) {
+ kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release);
+ goto out;
+ }
+
+ if (!wait_event_timeout(wait_data->wq, wait_data->done,
+ cdx_mcdi_rpc_timeout(cdx, cmd)) &&
+ !wait_data->done) {
+ pr_err("MC command 0x%x inlen %zu timed out (sync)\n",
+ cmd, inlen);
+
+ cdx_mcdi_cancel_cmd(cdx, cmd_item);
+
+ wait_data->rc = -ETIMEDOUT;
+ wait_data->outlen_actual = 0;
+ }
+
+ if (outlen_actual)
+ *outlen_actual = wait_data->outlen_actual;
+ rc = wait_data->rc;
+
+out:
+ kref_put(&wait_data->ref, cdx_mcdi_blocking_data_release);
+
+ return rc;
+}
+
+static bool cdx_mcdi_get_seq(struct cdx_mcdi_iface *mcdi, unsigned char *seq)
+{
+ *seq = mcdi->prev_seq;
+ do {
+ *seq = (*seq + 1) % ARRAY_SIZE(mcdi->seq_held_by);
+ } while (mcdi->seq_held_by[*seq] && *seq != mcdi->prev_seq);
+ return !mcdi->seq_held_by[*seq];
+}
+
+static int cdx_mcdi_rpc_async_internal(struct cdx_mcdi *cdx,
+ struct cdx_mcdi_cmd *cmd,
+ unsigned int *handle)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+ LIST_HEAD(cleanup_list);
+
+ if (!mcdi) {
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ return -ENETDOWN;
+ }
+
+ if (mcdi->mode == MCDI_MODE_FAIL) {
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ return -ENETDOWN;
+ }
+
+ cmd->mcdi = mcdi;
+ INIT_WORK(&cmd->work, cdx_mcdi_cmd_work);
+ INIT_LIST_HEAD(&cmd->list);
+ INIT_LIST_HEAD(&cmd->cleanup_list);
+ cmd->rc = 0;
+ cmd->outbuf = NULL;
+ cmd->outlen = 0;
+
+ queue_work(mcdi->workqueue, &cmd->work);
+ return 0;
+}
+
+static void cdx_mcdi_cmd_start_or_queue(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd)
+{
+ struct cdx_mcdi *cdx = mcdi->cdx;
+ u8 seq;
+
+ if (!mcdi->db_held_by &&
+ cdx_mcdi_get_seq(mcdi, &seq)) {
+ cmd->seq = seq;
+ cmd->reboot_seen = false;
+ cdx_mcdi_send_request(cdx, cmd);
+ cmd->state = MCDI_STATE_RUNNING;
+ } else {
+ cmd->state = MCDI_STATE_QUEUED;
+ }
+}
+
+/* try to advance other commands */
+static void cdx_mcdi_start_or_queue(struct cdx_mcdi_iface *mcdi,
+ bool allow_retry)
+{
+ struct cdx_mcdi_cmd *cmd, *tmp;
+
+ list_for_each_entry_safe(cmd, tmp, &mcdi->cmd_list, list)
+ if (cmd->state == MCDI_STATE_QUEUED ||
+ (cmd->state == MCDI_STATE_RETRY && allow_retry))
+ cdx_mcdi_cmd_start_or_queue(mcdi, cmd);
+}
+
+void cdx_mcdi_process_cmd(struct cdx_mcdi *cdx, struct cdx_dword *outbuf, int len)
+{
+ struct cdx_mcdi_iface *mcdi;
+ struct cdx_mcdi_cmd *cmd;
+ LIST_HEAD(cleanup_list);
+ unsigned int respseq;
+
+ if (!len || !outbuf) {
+ pr_err("Got empty MC response\n");
+ return;
+ }
+
+ mcdi = cdx_mcdi_if(cdx);
+ if (!mcdi)
+ return;
+
+ respseq = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_SEQ);
+
+ mutex_lock(&mcdi->iface_lock);
+ cmd = mcdi->seq_held_by[respseq];
+
+ if (cmd) {
+ if (cmd->state == MCDI_STATE_FINISHED) {
+ mutex_unlock(&mcdi->iface_lock);
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ return;
+ }
+
+ cdx_mcdi_complete_cmd(mcdi, cmd, outbuf, len, &cleanup_list);
+ } else {
+ pr_err("MC response unexpected for seq : %0X\n", respseq);
+ }
+
+ mutex_unlock(&mcdi->iface_lock);
+
+ cdx_mcdi_process_cleanup_list(mcdi->cdx, &cleanup_list);
+}
+
+static void cdx_mcdi_cmd_work(struct work_struct *context)
+{
+ struct cdx_mcdi_cmd *cmd =
+ container_of(context, struct cdx_mcdi_cmd, work);
+ struct cdx_mcdi_iface *mcdi = cmd->mcdi;
+
+ mutex_lock(&mcdi->iface_lock);
+
+ cmd->handle = mcdi->prev_handle++;
+ list_add_tail(&cmd->list, &mcdi->cmd_list);
+ cdx_mcdi_cmd_start_or_queue(mcdi, cmd);
+
+ mutex_unlock(&mcdi->iface_lock);
+}
+
+/*
+ * Returns true if the MCDI module is finished with the command.
+ * (examples of false would be if the command was proxied, or it was
+ * rejected by the MC due to lack of resources and requeued).
+ */
+static bool cdx_mcdi_complete_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct cdx_dword *outbuf,
+ int len,
+ struct list_head *cleanup_list)
+{
+ size_t resp_hdr_len, resp_data_len;
+ struct cdx_mcdi *cdx = mcdi->cdx;
+ unsigned int respcmd, error;
+ bool completed = false;
+ int rc;
+
+ /* ensure the command can't go away before this function returns */
+ kref_get(&cmd->ref);
+
+ respcmd = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_CODE);
+ error = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_ERROR);
+
+ if (respcmd != MC_CMD_V2_EXTN) {
+ resp_hdr_len = 4;
+ resp_data_len = CDX_DWORD_FIELD(outbuf[0], MCDI_HEADER_DATALEN);
+ } else {
+ resp_data_len = 0;
+ resp_hdr_len = 8;
+ if (len >= 8)
+ resp_data_len =
+ CDX_DWORD_FIELD(outbuf[1], MC_CMD_V2_EXTN_IN_ACTUAL_LEN);
+ }
+
+ if ((resp_hdr_len + resp_data_len) > len) {
+ pr_warn("Incomplete MCDI response received %d. Expected %zu\n",
+ len, (resp_hdr_len + resp_data_len));
+ resp_data_len = 0;
+ }
+
+#ifdef CONFIG_MCDI_LOGGING
+ if (!WARN_ON_ONCE(!mcdi->logging_buffer)) {
+ char *log = mcdi->logging_buffer;
+ int i, bytes = 0;
+ size_t rlen;
+
+ WARN_ON_ONCE(resp_hdr_len % 4);
+
+ rlen = resp_hdr_len / 4 + DIV_ROUND_UP(resp_data_len, 4);
+
+ for (i = 0; i < rlen; i++) {
+ if ((bytes + 75) > LOG_LINE_MAX) {
+ pr_info("MCDI RPC RESP:%s \\\n", log);
+ bytes = 0;
+ }
+ bytes += snprintf(log + bytes, LOG_LINE_MAX - bytes,
+ " %08x", le32_to_cpu(outbuf[i].cdx_u32));
+ }
+
+ pr_info("MCDI RPC RESP:%s\n", log);
+ }
+#endif
+
+ if (error && resp_data_len == 0) {
+ /* MC rebooted during command */
+ rc = -EIO;
+ } else {
+ if (WARN_ON_ONCE(error && resp_data_len < 4))
+ resp_data_len = 4;
+ if (error) {
+ rc = CDX_DWORD_FIELD(outbuf[resp_hdr_len / 4], CDX_DWORD);
+ if (!cmd->quiet) {
+ int err_arg = 0;
+
+ if (resp_data_len >= MC_CMD_ERR_ARG_OFST + 4) {
+ int offset = (resp_hdr_len + MC_CMD_ERR_ARG_OFST) / 4;
+
+ err_arg = CDX_DWORD_VAL(outbuf[offset]);
+ }
+
+ _cdx_mcdi_display_error(cdx, cmd->cmd,
+ cmd->inlen, rc, err_arg,
+ cdx_mcdi_errno(cdx, rc));
+ }
+ rc = cdx_mcdi_errno(cdx, rc);
+ } else {
+ rc = 0;
+ }
+ }
+
+ /* free doorbell */
+ if (mcdi->db_held_by == cmd)
+ mcdi->db_held_by = NULL;
+
+ if (cdx_cmd_cancelled(cmd)) {
+ list_del(&cmd->list);
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+ completed = true;
+ } else if (rc == MC_CMD_ERR_QUEUE_FULL) {
+ cmd->state = MCDI_STATE_RETRY;
+ } else {
+ cmd->rc = rc;
+ cmd->outbuf = outbuf + DIV_ROUND_UP(resp_hdr_len, 4);
+ cmd->outlen = resp_data_len;
+ cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list);
+ completed = true;
+ }
+
+ /* free sequence number and buffer */
+ mcdi->seq_held_by[cmd->seq] = NULL;
+
+ cdx_mcdi_start_or_queue(mcdi, rc != MC_CMD_ERR_QUEUE_FULL);
+
+ /* wake up anyone waiting for flush */
+ wake_up(&mcdi->cmd_complete_wq);
+
+ kref_put(&cmd->ref, cdx_mcdi_cmd_release);
+
+ return completed;
+}
+
+static void cdx_mcdi_timeout_cmd(struct cdx_mcdi_iface *mcdi,
+ struct cdx_mcdi_cmd *cmd,
+ struct list_head *cleanup_list)
+{
+ struct cdx_mcdi *cdx = mcdi->cdx;
+
+ pr_err("MC command 0x%x inlen %zu state %d timed out after %u ms\n",
+ cmd->cmd, cmd->inlen, cmd->state,
+ jiffies_to_msecs(jiffies - cmd->started));
+
+ cmd->rc = -ETIMEDOUT;
+ cdx_mcdi_remove_cmd(mcdi, cmd, cleanup_list);
+
+ cdx_mcdi_mode_fail(cdx, cleanup_list);
+}
+
+/**
+ * cdx_mcdi_rpc - Issue an MCDI command and wait for completion
+ * @cdx: NIC through which to issue the command
+ * @cmd: Command type number
+ * @inbuf: Command parameters
+ * @inlen: Length of command parameters, in bytes. Must be a multiple
+ * of 4 and no greater than %MCDI_CTL_SDU_LEN_MAX_V1.
+ * @outbuf: Response buffer. May be %NULL if @outlen is 0.
+ * @outlen: Length of response buffer, in bytes. If the actual
+ * response is longer than @outlen & ~3, it will be truncated
+ * to that length.
+ * @outlen_actual: Pointer through which to return the actual response
+ * length. May be %NULL if this is not needed.
+ *
+ * This function may sleep and therefore must be called in process
+ * context.
+ *
+ * Return: A negative error code, or zero if successful. The error
+ * code may come from the MCDI response or may indicate a failure
+ * to communicate with the MC. In the former case, the response
+ * will still be copied to @outbuf and *@outlen_actual will be
+ * set accordingly. In the latter case, *@outlen_actual will be
+ * set to zero.
+ */
+int cdx_mcdi_rpc(struct cdx_mcdi *cdx, unsigned int cmd,
+ const struct cdx_dword *inbuf, size_t inlen,
+ struct cdx_dword *outbuf, size_t outlen,
+ size_t *outlen_actual)
+{
+ return cdx_mcdi_rpc_sync(cdx, cmd, inbuf, inlen, outbuf, outlen,
+ outlen_actual, false);
+}
+
+/**
+ * cdx_mcdi_rpc_async - Schedule an MCDI command to run asynchronously
+ * @cdx: NIC through which to issue the command
+ * @cmd: Command type number
+ * @inbuf: Command parameters
+ * @inlen: Length of command parameters, in bytes
+ * @complete: Function to be called on completion or cancellation.
+ * @cookie: Arbitrary value to be passed to @complete.
+ *
+ * This function does not sleep and therefore may be called in atomic
+ * context. It will fail if event queues are disabled or if MCDI
+ * event completions have been disabled due to an error.
+ *
+ * If it succeeds, the @complete function will be called exactly once
+ * in process context, when one of the following occurs:
+ * (a) the completion event is received (in process context)
+ * (b) event queues are disabled (in the process that disables them)
+ */
+int
+cdx_mcdi_rpc_async(struct cdx_mcdi *cdx, unsigned int cmd,
+ const struct cdx_dword *inbuf, size_t inlen,
+ cdx_mcdi_async_completer *complete, unsigned long cookie)
+{
+ struct cdx_mcdi_cmd *cmd_item =
+ kmalloc(sizeof(struct cdx_mcdi_cmd) + inlen, GFP_ATOMIC);
+
+ if (!cmd_item)
+ return -ENOMEM;
+
+ kref_init(&cmd_item->ref);
+ cmd_item->quiet = true;
+ cmd_item->cookie = cookie;
+ cmd_item->completer = complete;
+ cmd_item->cmd = cmd;
+ cmd_item->inlen = inlen;
+ /* inbuf is probably not valid after return, so take a copy */
+ cmd_item->inbuf = (struct cdx_dword *)(cmd_item + 1);
+ memcpy(cmd_item + 1, inbuf, inlen);
+
+ return cdx_mcdi_rpc_async_internal(cdx, cmd_item, NULL);
+}
+
+static void _cdx_mcdi_display_error(struct cdx_mcdi *cdx, unsigned int cmd,
+ size_t inlen, int raw, int arg, int err_no)
+{
+ pr_err("MC command 0x%x inlen %d failed err_no=%d (raw=%d) arg=%d\n",
+ cmd, (int)inlen, err_no, raw, arg);
+}
+
+/*
+ * Set MCDI mode to fail to prevent any new commands, then cancel any
+ * outstanding commands.
+ * Caller must hold the mcdi iface_lock.
+ */
+static void cdx_mcdi_mode_fail(struct cdx_mcdi *cdx, struct list_head *cleanup_list)
+{
+ struct cdx_mcdi_iface *mcdi = cdx_mcdi_if(cdx);
+
+ if (!mcdi)
+ return;
+
+ mcdi->mode = MCDI_MODE_FAIL;
+
+ while (!list_empty(&mcdi->cmd_list)) {
+ struct cdx_mcdi_cmd *cmd;
+
+ cmd = list_first_entry(&mcdi->cmd_list, struct cdx_mcdi_cmd,
+ list);
+ _cdx_mcdi_cancel_cmd(mcdi, cdx_mcdi_cmd_handle(cmd), cleanup_list);
+ }
+}
diff --git a/drivers/cdx/controller/mcdi.h b/drivers/cdx/controller/mcdi.h
new file mode 100644
index 000000000000..0bfbeab04e43
--- /dev/null
+++ b/drivers/cdx/controller/mcdi.h
@@ -0,0 +1,248 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2008-2013 Solarflare Communications Inc.
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef CDX_MCDI_H
+#define CDX_MCDI_H
+
+#include <linux/mutex.h>
+#include <linux/kref.h>
+#include <linux/rpmsg.h>
+
+#include "bitfield.h"
+#include "mc_cdx_pcol.h"
+
+#ifdef DEBUG
+#define CDX_WARN_ON_ONCE_PARANOID(x) WARN_ON_ONCE(x)
+#define CDX_WARN_ON_PARANOID(x) WARN_ON(x)
+#else
+#define CDX_WARN_ON_ONCE_PARANOID(x) do {} while (0)
+#define CDX_WARN_ON_PARANOID(x) do {} while (0)
+#endif
+
+/**
+ * enum cdx_mcdi_mode - MCDI transaction mode
+ * @MCDI_MODE_EVENTS: wait for an mcdi response callback.
+ * @MCDI_MODE_FAIL: we think MCDI is dead, so fail-fast all calls
+ */
+enum cdx_mcdi_mode {
+ MCDI_MODE_EVENTS,
+ MCDI_MODE_FAIL,
+};
+
+#define MCDI_RPC_TIMEOUT (10 * HZ)
+#define MCDI_RPC_LONG_TIMEOU (60 * HZ)
+#define MCDI_RPC_POST_RST_TIME (10 * HZ)
+
+#define MCDI_BUF_LEN (8 + MCDI_CTL_SDU_LEN_MAX)
+
+/**
+ * enum cdx_mcdi_cmd_state - State for an individual MCDI command
+ * @MCDI_STATE_QUEUED: Command not started and is waiting to run.
+ * @MCDI_STATE_RETRY: Command was submitted and MC rejected with no resources,
+ * as MC have too many outstanding commands. Command will be retried once
+ * another command returns.
+ * @MCDI_STATE_RUNNING: Command was accepted and is running.
+ * @MCDI_STATE_RUNNING_CANCELLED: Command is running but the issuer cancelled
+ * the command.
+ * @MCDI_STATE_FINISHED: Processing of this command has completed.
+ */
+
+enum cdx_mcdi_cmd_state {
+ MCDI_STATE_QUEUED,
+ MCDI_STATE_RETRY,
+ MCDI_STATE_RUNNING,
+ MCDI_STATE_RUNNING_CANCELLED,
+ MCDI_STATE_FINISHED,
+};
+
+/**
+ * struct cdx_mcdi - CDX MCDI Firmware interface, to interact
+ * with CDX controller.
+ * @mcdi: MCDI interface
+ * @mcdi_ops: MCDI operations
+ * @r5_rproc : R5 Remoteproc device handle
+ * @rpdev: RPMsg device
+ * @ept: RPMsg endpoint
+ * @work: Post probe work
+ */
+struct cdx_mcdi {
+ /* MCDI interface */
+ struct cdx_mcdi_data *mcdi;
+ const struct cdx_mcdi_ops *mcdi_ops;
+
+ struct rproc *r5_rproc;
+ struct rpmsg_device *rpdev;
+ struct rpmsg_endpoint *ept;
+ struct work_struct work;
+};
+
+struct cdx_mcdi_ops {
+ void (*mcdi_request)(struct cdx_mcdi *cdx,
+ const struct cdx_dword *hdr, size_t hdr_len,
+ const struct cdx_dword *sdu, size_t sdu_len);
+ unsigned int (*mcdi_rpc_timeout)(struct cdx_mcdi *cdx, unsigned int cmd);
+};
+
+typedef void cdx_mcdi_async_completer(struct cdx_mcdi *cdx,
+ unsigned long cookie, int rc,
+ struct cdx_dword *outbuf,
+ size_t outlen_actual);
+
+/**
+ * struct cdx_mcdi_cmd - An outstanding MCDI command
+ * @ref: Reference count. There will be one reference if the command is
+ * in the mcdi_iface cmd_list, another if it's on a cleanup list,
+ * and a third if it's queued in the work queue.
+ * @list: The data for this entry in mcdi->cmd_list
+ * @cleanup_list: The data for this entry in a cleanup list
+ * @work: The work item for this command, queued in mcdi->workqueue
+ * @mcdi: The mcdi_iface for this command
+ * @state: The state of this command
+ * @inlen: inbuf length
+ * @inbuf: Input buffer
+ * @quiet: Whether to silence errors
+ * @reboot_seen: Whether a reboot has been seen during this command,
+ * to prevent duplicates
+ * @seq: Sequence number
+ * @started: Jiffies this command was started at
+ * @cookie: Context for completion function
+ * @completer: Completion function
+ * @handle: Command handle
+ * @cmd: Command number
+ * @rc: Return code
+ * @outlen: Length of output buffer
+ * @outbuf: Output buffer
+ */
+struct cdx_mcdi_cmd {
+ struct kref ref;
+ struct list_head list;
+ struct list_head cleanup_list;
+ struct work_struct work;
+ struct cdx_mcdi_iface *mcdi;
+ enum cdx_mcdi_cmd_state state;
+ size_t inlen;
+ const struct cdx_dword *inbuf;
+ bool quiet;
+ bool reboot_seen;
+ u8 seq;
+ unsigned long started;
+ unsigned long cookie;
+ cdx_mcdi_async_completer *completer;
+ unsigned int handle;
+ unsigned int cmd;
+ int rc;
+ size_t outlen;
+ struct cdx_dword *outbuf;
+ /* followed by inbuf data if necessary */
+};
+
+/**
+ * struct cdx_mcdi_iface - MCDI protocol context
+ * @cdx: The associated NIC
+ * @iface_lock: Serialise access to this structure
+ * @outstanding_cleanups: Count of cleanups
+ * @cmd_list: List of outstanding and running commands
+ * @workqueue: Workqueue used for delayed processing
+ * @cmd_complete_wq: Waitqueue for command completion
+ * @db_held_by: Command the MC doorbell is in use by
+ * @seq_held_by: Command each sequence number is in use by
+ * @prev_handle: The last used command handle
+ * @mode: Poll for mcdi completion, or wait for an mcdi_event
+ * @prev_seq: The last used sequence number
+ * @new_epoch: Indicates start of day or start of MC reboot recovery
+ * @logging_buffer: Buffer that may be used to build MCDI tracing messages
+ * @logging_enabled: Whether to trace MCDI
+ */
+struct cdx_mcdi_iface {
+ struct cdx_mcdi *cdx;
+ /* Serialise access */
+ struct mutex iface_lock;
+ unsigned int outstanding_cleanups;
+ struct list_head cmd_list;
+ struct workqueue_struct *workqueue;
+ wait_queue_head_t cmd_complete_wq;
+ struct cdx_mcdi_cmd *db_held_by;
+ struct cdx_mcdi_cmd *seq_held_by[16];
+ unsigned int prev_handle;
+ enum cdx_mcdi_mode mode;
+ u8 prev_seq;
+ bool new_epoch;
+#ifdef CONFIG_MCDI_LOGGING
+ bool logging_enabled;
+ char *logging_buffer;
+#endif
+};
+
+/**
+ * struct cdx_mcdi_data - extra state for NICs that implement MCDI
+ * @iface: Interface/protocol state
+ * @fn_flags: Flags for this function, as returned by %MC_CMD_DRV_ATTACH.
+ */
+struct cdx_mcdi_data {
+ struct cdx_mcdi_iface iface;
+ u32 fn_flags;
+};
+
+static inline struct cdx_mcdi_iface *cdx_mcdi_if(struct cdx_mcdi *cdx)
+{
+ return cdx->mcdi ? &cdx->mcdi->iface : NULL;
+}
+
+int cdx_mcdi_init(struct cdx_mcdi *cdx);
+void cdx_mcdi_finish(struct cdx_mcdi *cdx);
+
+void cdx_mcdi_process_cmd(struct cdx_mcdi *cdx, struct cdx_dword *outbuf, int len);
+int cdx_mcdi_rpc(struct cdx_mcdi *cdx, unsigned int cmd,
+ const struct cdx_dword *inbuf, size_t inlen,
+ struct cdx_dword *outbuf, size_t outlen, size_t *outlen_actual);
+int cdx_mcdi_rpc_async(struct cdx_mcdi *cdx, unsigned int cmd,
+ const struct cdx_dword *inbuf, size_t inlen,
+ cdx_mcdi_async_completer *complete,
+ unsigned long cookie);
+int cdx_mcdi_wait_for_quiescence(struct cdx_mcdi *cdx,
+ unsigned int timeout_jiffies);
+
+/*
+ * We expect that 16- and 32-bit fields in MCDI requests and responses
+ * are appropriately aligned, but 64-bit fields are only
+ * 32-bit-aligned.
+ */
+#define MCDI_DECLARE_BUF(_name, _len) struct cdx_dword _name[DIV_ROUND_UP(_len, 4)] = {{0}}
+#define _MCDI_PTR(_buf, _offset) \
+ ((u8 *)(_buf) + (_offset))
+#define MCDI_PTR(_buf, _field) \
+ _MCDI_PTR(_buf, MC_CMD_ ## _field ## _OFST)
+#define _MCDI_CHECK_ALIGN(_ofst, _align) \
+ ((void)BUILD_BUG_ON_ZERO((_ofst) & ((_align) - 1)), \
+ (_ofst))
+#define _MCDI_DWORD(_buf, _field) \
+ ((_buf) + (_MCDI_CHECK_ALIGN(MC_CMD_ ## _field ## _OFST, 4) >> 2))
+
+#define MCDI_BYTE(_buf, _field) \
+ ((void)BUILD_BUG_ON_ZERO(MC_CMD_ ## _field ## _LEN != 1), \
+ *MCDI_PTR(_buf, _field))
+#define MCDI_WORD(_buf, _field) \
+ ((void)BUILD_BUG_ON_ZERO(MC_CMD_ ## _field ## _LEN != 2), \
+ le16_to_cpu(*(__force const __le16 *)MCDI_PTR(_buf, _field)))
+#define MCDI_SET_DWORD(_buf, _field, _value) \
+ CDX_POPULATE_DWORD_1(*_MCDI_DWORD(_buf, _field), CDX_DWORD, _value)
+#define MCDI_DWORD(_buf, _field) \
+ CDX_DWORD_FIELD(*_MCDI_DWORD(_buf, _field), CDX_DWORD)
+#define MCDI_POPULATE_DWORD_1(_buf, _field, _name1, _value1) \
+ CDX_POPULATE_DWORD_1(*_MCDI_DWORD(_buf, _field), \
+ MC_CMD_ ## _name1, _value1)
+#define MCDI_SET_QWORD(_buf, _field, _value) \
+ do { \
+ CDX_POPULATE_DWORD_1(_MCDI_DWORD(_buf, _field)[0], \
+ CDX_DWORD, (u32)(_value)); \
+ CDX_POPULATE_DWORD_1(_MCDI_DWORD(_buf, _field)[1], \
+ CDX_DWORD, (u64)(_value) >> 32); \
+ } while (0)
+#define MCDI_QWORD(_buf, _field) \
+ (CDX_DWORD_FIELD(_MCDI_DWORD(_buf, _field)[0], CDX_DWORD) | \
+ (u64)CDX_DWORD_FIELD(_MCDI_DWORD(_buf, _field)[1], CDX_DWORD) << 32)
+
+#endif /* CDX_MCDI_H */
diff --git a/drivers/cdx/controller/mcdi_functions.c b/drivers/cdx/controller/mcdi_functions.c
new file mode 100644
index 000000000000..0158f26533dd
--- /dev/null
+++ b/drivers/cdx/controller/mcdi_functions.c
@@ -0,0 +1,139 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#include <linux/module.h>
+
+#include "mcdi.h"
+#include "mcdi_functions.h"
+
+int cdx_mcdi_get_num_buses(struct cdx_mcdi *cdx)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN);
+ size_t outlen;
+ int ret;
+
+ ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_ENUM_BUSES, NULL, 0,
+ outbuf, sizeof(outbuf), &outlen);
+ if (ret)
+ return ret;
+
+ if (outlen != MC_CMD_CDX_BUS_ENUM_BUSES_OUT_LEN)
+ return -EIO;
+
+ return MCDI_DWORD(outbuf, CDX_BUS_ENUM_BUSES_OUT_BUS_COUNT);
+}
+
+int cdx_mcdi_get_num_devs(struct cdx_mcdi *cdx, int bus_num)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN);
+ MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_ENUM_DEVICES_IN_LEN);
+ size_t outlen;
+ int ret;
+
+ MCDI_SET_DWORD(inbuf, CDX_BUS_ENUM_DEVICES_IN_BUS, bus_num);
+
+ ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_ENUM_DEVICES, inbuf, sizeof(inbuf),
+ outbuf, sizeof(outbuf), &outlen);
+ if (ret)
+ return ret;
+
+ if (outlen != MC_CMD_CDX_BUS_ENUM_DEVICES_OUT_LEN)
+ return -EIO;
+
+ return MCDI_DWORD(outbuf, CDX_BUS_ENUM_DEVICES_OUT_DEVICE_COUNT);
+}
+
+int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx,
+ u8 bus_num, u8 dev_num,
+ struct cdx_dev_params *dev_params)
+{
+ MCDI_DECLARE_BUF(outbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN);
+ MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_IN_LEN);
+ struct resource *res = &dev_params->res[0];
+ size_t outlen;
+ u32 req_id;
+ int ret;
+
+ MCDI_SET_DWORD(inbuf, CDX_BUS_GET_DEVICE_CONFIG_IN_BUS, bus_num);
+ MCDI_SET_DWORD(inbuf, CDX_BUS_GET_DEVICE_CONFIG_IN_DEVICE, dev_num);
+
+ ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_BUS_GET_DEVICE_CONFIG, inbuf, sizeof(inbuf),
+ outbuf, sizeof(outbuf), &outlen);
+ if (ret)
+ return ret;
+
+ if (outlen != MC_CMD_CDX_BUS_GET_DEVICE_CONFIG_OUT_LEN)
+ return -EIO;
+
+ dev_params->bus_num = bus_num;
+ dev_params->dev_num = dev_num;
+
+ req_id = MCDI_DWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_REQUESTER_ID);
+ dev_params->req_id = req_id;
+
+ dev_params->res_count = 0;
+ if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE) != 0) {
+ res[dev_params->res_count].start =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE);
+ res[dev_params->res_count].end =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_BASE) +
+ MCDI_QWORD(outbuf,
+ CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION0_SIZE) - 1;
+ res[dev_params->res_count].flags = IORESOURCE_MEM;
+ dev_params->res_count++;
+ }
+
+ if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE) != 0) {
+ res[dev_params->res_count].start =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE);
+ res[dev_params->res_count].end =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_BASE) +
+ MCDI_QWORD(outbuf,
+ CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION1_SIZE) - 1;
+ res[dev_params->res_count].flags = IORESOURCE_MEM;
+ dev_params->res_count++;
+ }
+
+ if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE) != 0) {
+ res[dev_params->res_count].start =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE);
+ res[dev_params->res_count].end =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_BASE) +
+ MCDI_QWORD(outbuf,
+ CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION2_SIZE) - 1;
+ res[dev_params->res_count].flags = IORESOURCE_MEM;
+ dev_params->res_count++;
+ }
+
+ if (MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE) != 0) {
+ res[dev_params->res_count].start =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE);
+ res[dev_params->res_count].end =
+ MCDI_QWORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_BASE) +
+ MCDI_QWORD(outbuf,
+ CDX_BUS_GET_DEVICE_CONFIG_OUT_MMIO_REGION3_SIZE) - 1;
+ res[dev_params->res_count].flags = IORESOURCE_MEM;
+ dev_params->res_count++;
+ }
+
+ dev_params->vendor = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_VENDOR_ID);
+ dev_params->device = MCDI_WORD(outbuf, CDX_BUS_GET_DEVICE_CONFIG_OUT_DEVICE_ID);
+
+ return 0;
+}
+
+int cdx_mcdi_reset_device(struct cdx_mcdi *cdx, u8 bus_num, u8 dev_num)
+{
+ MCDI_DECLARE_BUF(inbuf, MC_CMD_CDX_DEVICE_RESET_IN_LEN);
+ int ret;
+
+ MCDI_SET_DWORD(inbuf, CDX_DEVICE_RESET_IN_BUS, bus_num);
+ MCDI_SET_DWORD(inbuf, CDX_DEVICE_RESET_IN_DEVICE, dev_num);
+
+ ret = cdx_mcdi_rpc(cdx, MC_CMD_CDX_DEVICE_RESET, inbuf, sizeof(inbuf),
+ NULL, 0, NULL);
+
+ return ret;
+}
diff --git a/drivers/cdx/controller/mcdi_functions.h b/drivers/cdx/controller/mcdi_functions.h
new file mode 100644
index 000000000000..7440ace5539a
--- /dev/null
+++ b/drivers/cdx/controller/mcdi_functions.h
@@ -0,0 +1,61 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Header file for MCDI FW interaction for CDX bus.
+ *
+ * Copyright (C) 2022-2023, Advanced Micro Devices, Inc.
+ */
+
+#ifndef CDX_MCDI_FUNCTIONS_H
+#define CDX_MCDI_FUNCTIONS_H
+
+#include "mcdi.h"
+#include "../cdx.h"
+
+/**
+ * cdx_mcdi_get_num_buses - Get the total number of buses on
+ * the controller.
+ * @cdx: pointer to MCDI interface.
+ *
+ * Return: total number of buses available on the controller,
+ * <0 on failure
+ */
+int cdx_mcdi_get_num_buses(struct cdx_mcdi *cdx);
+
+/**
+ * cdx_mcdi_get_num_devs - Get the total number of devices on
+ * a particular bus of the controller.
+ * @cdx: pointer to MCDI interface.
+ * @bus_num: Bus number.
+ *
+ * Return: total number of devices available on the bus, <0 on failure
+ */
+int cdx_mcdi_get_num_devs(struct cdx_mcdi *cdx, int bus_num);
+
+/**
+ * cdx_mcdi_get_dev_config - Get configuration for a particular
+ * bus_num:dev_num
+ * @cdx: pointer to MCDI interface.
+ * @bus_num: Bus number.
+ * @dev_num: Device number.
+ * @dev_params: Pointer to cdx_dev_params, this is populated by this
+ * device with the configuration corresponding to the provided
+ * bus_num:dev_num.
+ *
+ * Return: 0 total number of devices available on the bus, <0 on failure
+ */
+int cdx_mcdi_get_dev_config(struct cdx_mcdi *cdx,
+ u8 bus_num, u8 dev_num,
+ struct cdx_dev_params *dev_params);
+
+/**
+ * cdx_mcdi_reset_device - Reset cdx device represented by bus_num:dev_num
+ * @cdx: pointer to MCDI interface.
+ * @bus_num: Bus number.
+ * @dev_num: Device number.
+ *
+ * Return: 0 on success, <0 on failure
+ */
+int cdx_mcdi_reset_device(struct cdx_mcdi *cdx,
+ u8 bus_num, u8 dev_num);
+
+#endif /* CDX_MCDI_FUNCTIONS_H */
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 30fe9848dac1..801d6c83f896 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -247,8 +247,6 @@ config SONYPI
To compile this driver as a module, choose M here: the
module will be called sonypi.
-source "drivers/char/pcmcia/Kconfig"
-
config MWAVE
tristate "ACP Modem (Mwave) support"
depends on X86 && TTY
diff --git a/drivers/char/Makefile b/drivers/char/Makefile
index 1b35d1724565..c5f532e412f1 100644
--- a/drivers/char/Makefile
+++ b/drivers/char/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_TELCLOCK) += tlclk.o
obj-$(CONFIG_MWAVE) += mwave/
obj-y += agp/
-obj-$(CONFIG_PCMCIA) += pcmcia/
obj-$(CONFIG_HANGCHECK_TIMER) += hangcheck-timer.o
obj-$(CONFIG_TCG_TPM) += tpm/
diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig
deleted file mode 100644
index f5d589b2be44..000000000000
--- a/drivers/char/pcmcia/Kconfig
+++ /dev/null
@@ -1,68 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# PCMCIA character device configuration
-#
-
-menu "PCMCIA character devices"
- depends on PCMCIA!=n
-
-config SYNCLINK_CS
- tristate "SyncLink PC Card support"
- depends on PCMCIA && TTY
- help
- Enable support for the SyncLink PC Card serial adapter, running
- asynchronous and HDLC communications up to 512Kbps. The port is
- selectable for RS-232, V.35, RS-449, RS-530, and X.21
-
- This driver may be built as a module ( = code which can be
- inserted in and removed from the running kernel whenever you want).
- The module will be called synclink_cs. If you want to do that, say M
- here.
-
-config CARDMAN_4000
- tristate "Omnikey Cardman 4000 support"
- depends on PCMCIA
- select BITREVERSE
- help
- Enable support for the Omnikey Cardman 4000 PCMCIA Smartcard
- reader.
-
- This kernel driver requires additional userspace support, either
- by the vendor-provided PC/SC ifd_handler (http://www.omnikey.com/),
- or via the cm4000 backend of OpenCT (http://www.opensc-project.org/opensc).
-
-config CARDMAN_4040
- tristate "Omnikey CardMan 4040 support"
- depends on PCMCIA
- help
- Enable support for the Omnikey CardMan 4040 PCMCIA Smartcard
- reader.
-
- This card is basically a USB CCID device connected to a FIFO
- in I/O space. To use the kernel driver, you will need either the
- PC/SC ifdhandler provided from the Omnikey homepage
- (http://www.omnikey.com/), or a current development version of OpenCT
- (http://www.opensc-project.org/opensc).
-
-config SCR24X
- tristate "SCR24x Chip Card Interface support"
- depends on PCMCIA
- help
- Enable support for the SCR24x PCMCIA Chip Card Interface.
-
- To compile this driver as a module, choose M here.
- The module will be called scr24x_cs..
-
- If unsure say N.
-
-config IPWIRELESS
- tristate "IPWireless 3G UMTS PCMCIA card support"
- depends on PCMCIA && NETDEVICES && TTY
- select PPP
- help
- This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
- some countries (for example Czech Republic, T-Mobile ISP) this card
- is shipped for service called UMTS 4G.
-
-endmenu
-
diff --git a/drivers/char/pcmcia/Makefile b/drivers/char/pcmcia/Makefile
deleted file mode 100644
index 024eed1c4ca5..000000000000
--- a/drivers/char/pcmcia/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0-only
-#
-# drivers/char/pcmcia/Makefile
-#
-# Makefile for the Linux PCMCIA char device drivers.
-#
-
-obj-$(CONFIG_SYNCLINK_CS) += synclink_cs.o
-obj-$(CONFIG_CARDMAN_4000) += cm4000_cs.o
-obj-$(CONFIG_CARDMAN_4040) += cm4040_cs.o
-obj-$(CONFIG_SCR24X) += scr24x_cs.o
diff --git a/drivers/char/pcmcia/cm4000_cs.c b/drivers/char/pcmcia/cm4000_cs.c
deleted file mode 100644
index 7f96d8571a53..000000000000
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ /dev/null
@@ -1,1912 +0,0 @@
- /*
- * A driver for the PCMCIA Smartcard Reader "Omnikey CardMan Mobile 4000"
- *
- * cm4000_cs.c support.linux@omnikey.com
- *
- * Tue Oct 23 11:32:43 GMT 2001 herp - cleaned up header files
- * Sun Jan 20 10:11:15 MET 2002 herp - added modversion header files
- * Thu Nov 14 16:34:11 GMT 2002 mh - added PPS functionality
- * Tue Nov 19 16:36:27 GMT 2002 mh - added SUSPEND/RESUME functionailty
- * Wed Jul 28 12:55:01 CEST 2004 mh - kernel 2.6 adjustments
- *
- * current version: 2.4.0gm4
- *
- * (C) 2000,2001,2002,2003,2004 Omnikey AG
- *
- * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
- * - Adhere to Kernel process/coding-style.rst
- * - Port to 2.6.13 "new" style PCMCIA
- * - Check for copy_{from,to}_user return values
- * - Use nonseekable_open()
- * - add class interface for udev device creation
- *
- * All rights reserved. Licensed under dual BSD/GPL license.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/bitrev.h>
-#include <linux/mutex.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-
-#include <linux/cm4000_cs.h>
-
-/* #define ATR_CSUM */
-
-#define reader_to_dev(x) (&x->p_dev->dev)
-
-/* n (debug level) is ignored */
-/* additional debug output may be enabled by re-compiling with
- * CM4000_DEBUG set */
-/* #define CM4000_DEBUG */
-#define DEBUGP(n, rdr, x, args...) do { \
- dev_dbg(reader_to_dev(rdr), "%s:" x, \
- __func__ , ## args); \
- } while (0)
-
-static DEFINE_MUTEX(cmm_mutex);
-
-#define T_1SEC (HZ)
-#define T_10MSEC msecs_to_jiffies(10)
-#define T_20MSEC msecs_to_jiffies(20)
-#define T_40MSEC msecs_to_jiffies(40)
-#define T_50MSEC msecs_to_jiffies(50)
-#define T_100MSEC msecs_to_jiffies(100)
-#define T_500MSEC msecs_to_jiffies(500)
-
-static void cm4000_release(struct pcmcia_device *link);
-
-static int major; /* major number we get from the kernel */
-
-/* note: the first state has to have number 0 always */
-
-#define M_FETCH_ATR 0
-#define M_TIMEOUT_WAIT 1
-#define M_READ_ATR_LEN 2
-#define M_READ_ATR 3
-#define M_ATR_PRESENT 4
-#define M_BAD_CARD 5
-#define M_CARDOFF 6
-
-#define LOCK_IO 0
-#define LOCK_MONITOR 1
-
-#define IS_AUTOPPS_ACT 6
-#define IS_PROCBYTE_PRESENT 7
-#define IS_INVREV 8
-#define IS_ANY_T0 9
-#define IS_ANY_T1 10
-#define IS_ATR_PRESENT 11
-#define IS_ATR_VALID 12
-#define IS_CMM_ABSENT 13
-#define IS_BAD_LENGTH 14
-#define IS_BAD_CSUM 15
-#define IS_BAD_CARD 16
-
-#define REG_FLAGS0(x) (x + 0)
-#define REG_FLAGS1(x) (x + 1)
-#define REG_NUM_BYTES(x) (x + 2)
-#define REG_BUF_ADDR(x) (x + 3)
-#define REG_BUF_DATA(x) (x + 4)
-#define REG_NUM_SEND(x) (x + 5)
-#define REG_BAUDRATE(x) (x + 6)
-#define REG_STOPBITS(x) (x + 7)
-
-struct cm4000_dev {
- struct pcmcia_device *p_dev;
-
- unsigned char atr[MAX_ATR];
- unsigned char rbuf[512];
- unsigned char sbuf[512];
-
- wait_queue_head_t devq; /* when removing cardman must not be
- zeroed! */
-
- wait_queue_head_t ioq; /* if IO is locked, wait on this Q */
- wait_queue_head_t atrq; /* wait for ATR valid */
- wait_queue_head_t readq; /* used by write to wake blk.read */
-
- /* warning: do not move this struct group.
- * initialising to zero depends on it - see ZERO_DEV below. */
- struct_group(init,
- unsigned char atr_csum;
- unsigned char atr_len_retry;
- unsigned short atr_len;
- unsigned short rlen; /* bytes avail. after write */
- unsigned short rpos; /* latest read pos. write zeroes */
- unsigned char procbyte; /* T=0 procedure byte */
- unsigned char mstate; /* state of card monitor */
- unsigned char cwarn; /* slow down warning */
- unsigned char flags0; /* cardman IO-flags 0 */
- unsigned char flags1; /* cardman IO-flags 1 */
- unsigned int mdelay; /* variable monitor speeds, in jiffies */
-
- unsigned int baudv; /* baud value for speed */
- unsigned char ta1;
- unsigned char proto; /* T=0, T=1, ... */
- unsigned long flags; /* lock+flags (MONITOR,IO,ATR) * for concurrent
- access */
-
- unsigned char pts[4];
-
- struct timer_list timer; /* used to keep monitor running */
- int monitor_running;
- );
-};
-
-#define ZERO_DEV(dev) memset(&((dev)->init), 0, sizeof((dev)->init))
-
-static struct pcmcia_device *dev_table[CM4000_MAX_DEV];
-static struct class *cmm_class;
-
-/* This table doesn't use spaces after the comma between fields and thus
- * violates process/coding-style.rst. However, I don't really think wrapping it around will
- * make it any clearer to read -HW */
-static unsigned char fi_di_table[10][14] = {
-/*FI 00 01 02 03 04 05 06 07 08 09 10 11 12 13 */
-/*DI */
-/* 0 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-/* 1 */ {0x01,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x91,0x11,0x11,0x11,0x11},
-/* 2 */ {0x02,0x12,0x22,0x32,0x11,0x11,0x11,0x11,0x11,0x92,0xA2,0xB2,0x11,0x11},
-/* 3 */ {0x03,0x13,0x23,0x33,0x43,0x53,0x63,0x11,0x11,0x93,0xA3,0xB3,0xC3,0xD3},
-/* 4 */ {0x04,0x14,0x24,0x34,0x44,0x54,0x64,0x11,0x11,0x94,0xA4,0xB4,0xC4,0xD4},
-/* 5 */ {0x00,0x15,0x25,0x35,0x45,0x55,0x65,0x11,0x11,0x95,0xA5,0xB5,0xC5,0xD5},
-/* 6 */ {0x06,0x16,0x26,0x36,0x46,0x56,0x66,0x11,0x11,0x96,0xA6,0xB6,0xC6,0xD6},
-/* 7 */ {0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11,0x11},
-/* 8 */ {0x08,0x11,0x28,0x38,0x48,0x58,0x68,0x11,0x11,0x98,0xA8,0xB8,0xC8,0xD8},
-/* 9 */ {0x09,0x19,0x29,0x39,0x49,0x59,0x69,0x11,0x11,0x99,0xA9,0xB9,0xC9,0xD9}
-};
-
-#ifndef CM4000_DEBUG
-#define xoutb outb
-#define xinb inb
-#else
-static inline void xoutb(unsigned char val, unsigned short port)
-{
- pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
- outb(val, port);
-}
-static inline unsigned char xinb(unsigned short port)
-{
- unsigned char val;
-
- val = inb(port);
- pr_debug("%.2x=inb(%.4x)\n", val, port);
-
- return val;
-}
-#endif
-
-static inline unsigned char invert_revert(unsigned char ch)
-{
- return bitrev8(~ch);
-}
-
-static void str_invert_revert(unsigned char *b, int len)
-{
- int i;
-
- for (i = 0; i < len; i++)
- b[i] = invert_revert(b[i]);
-}
-
-#define ATRLENCK(dev,pos) \
- if (pos>=dev->atr_len || pos>=MAX_ATR) \
- goto return_0;
-
-static unsigned int calc_baudv(unsigned char fidi)
-{
- unsigned int wcrcf, wbrcf, fi_rfu, di_rfu;
-
- fi_rfu = 372;
- di_rfu = 1;
-
- /* FI */
- switch ((fidi >> 4) & 0x0F) {
- case 0x00:
- wcrcf = 372;
- break;
- case 0x01:
- wcrcf = 372;
- break;
- case 0x02:
- wcrcf = 558;
- break;
- case 0x03:
- wcrcf = 744;
- break;
- case 0x04:
- wcrcf = 1116;
- break;
- case 0x05:
- wcrcf = 1488;
- break;
- case 0x06:
- wcrcf = 1860;
- break;
- case 0x07:
- wcrcf = fi_rfu;
- break;
- case 0x08:
- wcrcf = fi_rfu;
- break;
- case 0x09:
- wcrcf = 512;
- break;
- case 0x0A:
- wcrcf = 768;
- break;
- case 0x0B:
- wcrcf = 1024;
- break;
- case 0x0C:
- wcrcf = 1536;
- break;
- case 0x0D:
- wcrcf = 2048;
- break;
- default:
- wcrcf = fi_rfu;
- break;
- }
-
- /* DI */
- switch (fidi & 0x0F) {
- case 0x00:
- wbrcf = di_rfu;
- break;
- case 0x01:
- wbrcf = 1;
- break;
- case 0x02:
- wbrcf = 2;
- break;
- case 0x03:
- wbrcf = 4;
- break;
- case 0x04:
- wbrcf = 8;
- break;
- case 0x05:
- wbrcf = 16;
- break;
- case 0x06:
- wbrcf = 32;
- break;
- case 0x07:
- wbrcf = di_rfu;
- break;
- case 0x08:
- wbrcf = 12;
- break;
- case 0x09:
- wbrcf = 20;
- break;
- default:
- wbrcf = di_rfu;
- break;
- }
-
- return (wcrcf / wbrcf);
-}
-
-static unsigned short io_read_num_rec_bytes(unsigned int iobase,
- unsigned short *s)
-{
- unsigned short tmp;
-
- tmp = *s = 0;
- do {
- *s = tmp;
- tmp = inb(REG_NUM_BYTES(iobase)) |
- (inb(REG_FLAGS0(iobase)) & 4 ? 0x100 : 0);
- } while (tmp != *s);
-
- return *s;
-}
-
-static int parse_atr(struct cm4000_dev *dev)
-{
- unsigned char any_t1, any_t0;
- unsigned char ch, ifno;
- int ix, done;
-
- DEBUGP(3, dev, "-> parse_atr: dev->atr_len = %i\n", dev->atr_len);
-
- if (dev->atr_len < 3) {
- DEBUGP(5, dev, "parse_atr: atr_len < 3\n");
- return 0;
- }
-
- if (dev->atr[0] == 0x3f)
- set_bit(IS_INVREV, &dev->flags);
- else
- clear_bit(IS_INVREV, &dev->flags);
- ix = 1;
- ifno = 1;
- ch = dev->atr[1];
- dev->proto = 0; /* XXX PROTO */
- any_t1 = any_t0 = done = 0;
- dev->ta1 = 0x11; /* defaults to 9600 baud */
- do {
- if (ifno == 1 && (ch & 0x10)) {
- /* read first interface byte and TA1 is present */
- dev->ta1 = dev->atr[2];
- DEBUGP(5, dev, "Card says FiDi is 0x%.2x\n", dev->ta1);
- ifno++;
- } else if ((ifno == 2) && (ch & 0x10)) { /* TA(2) */
- dev->ta1 = 0x11;
- ifno++;
- }
-
- DEBUGP(5, dev, "Yi=%.2x\n", ch & 0xf0);
- ix += ((ch & 0x10) >> 4) /* no of int.face chars */
- +((ch & 0x20) >> 5)
- + ((ch & 0x40) >> 6)
- + ((ch & 0x80) >> 7);
- /* ATRLENCK(dev,ix); */
- if (ch & 0x80) { /* TDi */
- ch = dev->atr[ix];
- if ((ch & 0x0f)) {
- any_t1 = 1;
- DEBUGP(5, dev, "card is capable of T=1\n");
- } else {
- any_t0 = 1;
- DEBUGP(5, dev, "card is capable of T=0\n");
- }
- } else
- done = 1;
- } while (!done);
-
- DEBUGP(5, dev, "ix=%d noHist=%d any_t1=%d\n",
- ix, dev->atr[1] & 15, any_t1);
- if (ix + 1 + (dev->atr[1] & 0x0f) + any_t1 != dev->atr_len) {
- DEBUGP(5, dev, "length error\n");
- return 0;
- }
- if (any_t0)
- set_bit(IS_ANY_T0, &dev->flags);
-
- if (any_t1) { /* compute csum */
- dev->atr_csum = 0;
-#ifdef ATR_CSUM
- for (i = 1; i < dev->atr_len; i++)
- dev->atr_csum ^= dev->atr[i];
- if (dev->atr_csum) {
- set_bit(IS_BAD_CSUM, &dev->flags);
- DEBUGP(5, dev, "bad checksum\n");
- goto return_0;
- }
-#endif
- if (any_t0 == 0)
- dev->proto = 1; /* XXX PROTO */
- set_bit(IS_ANY_T1, &dev->flags);
- }
-
- return 1;
-}
-
-struct card_fixup {
- char atr[12];
- u_int8_t atr_len;
- u_int8_t stopbits;
-};
-
-static struct card_fixup card_fixups[] = {
- { /* ACOS */
- .atr = { 0x3b, 0xb3, 0x11, 0x00, 0x00, 0x41, 0x01 },
- .atr_len = 7,
- .stopbits = 0x03,
- },
- { /* Motorola */
- .atr = {0x3b, 0x76, 0x13, 0x00, 0x00, 0x80, 0x62, 0x07,
- 0x41, 0x81, 0x81 },
- .atr_len = 11,
- .stopbits = 0x04,
- },
-};
-
-static void set_cardparameter(struct cm4000_dev *dev)
-{
- int i;
- unsigned int iobase = dev->p_dev->resource[0]->start;
- u_int8_t stopbits = 0x02; /* ISO default */
-
- DEBUGP(3, dev, "-> set_cardparameter\n");
-
- dev->flags1 = dev->flags1 | (((dev->baudv - 1) & 0x0100) >> 8);
- xoutb(dev->flags1, REG_FLAGS1(iobase));
- DEBUGP(5, dev, "flags1 = 0x%02x\n", dev->flags1);
-
- /* set baudrate */
- xoutb((unsigned char)((dev->baudv - 1) & 0xFF), REG_BAUDRATE(iobase));
-
- DEBUGP(5, dev, "baudv = %i -> write 0x%02x\n", dev->baudv,
- ((dev->baudv - 1) & 0xFF));
-
- /* set stopbits */
- for (i = 0; i < ARRAY_SIZE(card_fixups); i++) {
- if (!memcmp(dev->atr, card_fixups[i].atr,
- card_fixups[i].atr_len))
- stopbits = card_fixups[i].stopbits;
- }
- xoutb(stopbits, REG_STOPBITS(iobase));
-
- DEBUGP(3, dev, "<- set_cardparameter\n");
-}
-
-static int set_protocol(struct cm4000_dev *dev, struct ptsreq *ptsreq)
-{
-
- unsigned long tmp, i;
- unsigned short num_bytes_read;
- unsigned char pts_reply[4];
- ssize_t rc;
- unsigned int iobase = dev->p_dev->resource[0]->start;
-
- rc = 0;
-
- DEBUGP(3, dev, "-> set_protocol\n");
- DEBUGP(5, dev, "ptsreq->Protocol = 0x%.8x, ptsreq->Flags=0x%.8x, "
- "ptsreq->pts1=0x%.2x, ptsreq->pts2=0x%.2x, "
- "ptsreq->pts3=0x%.2x\n", (unsigned int)ptsreq->protocol,
- (unsigned int)ptsreq->flags, ptsreq->pts1, ptsreq->pts2,
- ptsreq->pts3);
-
- /* Fill PTS structure */
- dev->pts[0] = 0xff;
- dev->pts[1] = 0x00;
- tmp = ptsreq->protocol;
- while ((tmp = (tmp >> 1)) > 0)
- dev->pts[1]++;
- dev->proto = dev->pts[1]; /* Set new protocol */
- dev->pts[1] = (0x01 << 4) | (dev->pts[1]);
-
- /* Correct Fi/Di according to CM4000 Fi/Di table */
- DEBUGP(5, dev, "Ta(1) from ATR is 0x%.2x\n", dev->ta1);
- /* set Fi/Di according to ATR TA(1) */
- dev->pts[2] = fi_di_table[dev->ta1 & 0x0F][(dev->ta1 >> 4) & 0x0F];
-
- /* Calculate PCK character */
- dev->pts[3] = dev->pts[0] ^ dev->pts[1] ^ dev->pts[2];
-
- DEBUGP(5, dev, "pts0=%.2x, pts1=%.2x, pts2=%.2x, pts3=%.2x\n",
- dev->pts[0], dev->pts[1], dev->pts[2], dev->pts[3]);
-
- /* check card convention */
- if (test_bit(IS_INVREV, &dev->flags))
- str_invert_revert(dev->pts, 4);
-
- /* reset SM */
- xoutb(0x80, REG_FLAGS0(iobase));
-
- /* Enable access to the message buffer */
- DEBUGP(5, dev, "Enable access to the messages buffer\n");
- dev->flags1 = 0x20 /* T_Active */
- | (test_bit(IS_INVREV, &dev->flags) ? 0x02 : 0x00) /* inv parity */
- | ((dev->baudv >> 8) & 0x01); /* MSB-baud */
- xoutb(dev->flags1, REG_FLAGS1(iobase));
-
- DEBUGP(5, dev, "Enable message buffer -> flags1 = 0x%.2x\n",
- dev->flags1);
-
- /* write challenge to the buffer */
- DEBUGP(5, dev, "Write challenge to buffer: ");
- for (i = 0; i < 4; i++) {
- xoutb(i, REG_BUF_ADDR(iobase));
- xoutb(dev->pts[i], REG_BUF_DATA(iobase)); /* buf data */
-#ifdef CM4000_DEBUG
- pr_debug("0x%.2x ", dev->pts[i]);
- }
- pr_debug("\n");
-#else
- }
-#endif
-
- /* set number of bytes to write */
- DEBUGP(5, dev, "Set number of bytes to write\n");
- xoutb(0x04, REG_NUM_SEND(iobase));
-
- /* Trigger CARDMAN CONTROLLER */
- xoutb(0x50, REG_FLAGS0(iobase));
-
- /* Monitor progress */
- /* wait for xmit done */
- DEBUGP(5, dev, "Waiting for NumRecBytes getting valid\n");
-
- for (i = 0; i < 100; i++) {
- if (inb(REG_FLAGS0(iobase)) & 0x08) {
- DEBUGP(5, dev, "NumRecBytes is valid\n");
- break;
- }
- /* can not sleep as this is in atomic context */
- mdelay(10);
- }
- if (i == 100) {
- DEBUGP(5, dev, "Timeout waiting for NumRecBytes getting "
- "valid\n");
- rc = -EIO;
- goto exit_setprotocol;
- }
-
- DEBUGP(5, dev, "Reading NumRecBytes\n");
- for (i = 0; i < 100; i++) {
- io_read_num_rec_bytes(iobase, &num_bytes_read);
- if (num_bytes_read >= 4) {
- DEBUGP(2, dev, "NumRecBytes = %i\n", num_bytes_read);
- if (num_bytes_read > 4) {
- rc = -EIO;
- goto exit_setprotocol;
- }
- break;
- }
- /* can not sleep as this is in atomic context */
- mdelay(10);
- }
-
- /* check whether it is a short PTS reply? */
- if (num_bytes_read == 3)
- i = 0;
-
- if (i == 100) {
- DEBUGP(5, dev, "Timeout reading num_bytes_read\n");
- rc = -EIO;
- goto exit_setprotocol;
- }
-
- DEBUGP(5, dev, "Reset the CARDMAN CONTROLLER\n");
- xoutb(0x80, REG_FLAGS0(iobase));
-
- /* Read PPS reply */
- DEBUGP(5, dev, "Read PPS reply\n");
- for (i = 0; i < num_bytes_read; i++) {
- xoutb(i, REG_BUF_ADDR(iobase));
- pts_reply[i] = inb(REG_BUF_DATA(iobase));
- }
-
-#ifdef CM4000_DEBUG
- DEBUGP(2, dev, "PTSreply: ");
- for (i = 0; i < num_bytes_read; i++) {
- pr_debug("0x%.2x ", pts_reply[i]);
- }
- pr_debug("\n");
-#endif /* CM4000_DEBUG */
-
- DEBUGP(5, dev, "Clear Tactive in Flags1\n");
- xoutb(0x20, REG_FLAGS1(iobase));
-
- /* Compare ptsreq and ptsreply */
- if ((dev->pts[0] == pts_reply[0]) &&
- (dev->pts[1] == pts_reply[1]) &&
- (dev->pts[2] == pts_reply[2]) && (dev->pts[3] == pts_reply[3])) {
- /* setcardparameter according to PPS */
- dev->baudv = calc_baudv(dev->pts[2]);
- set_cardparameter(dev);
- } else if ((dev->pts[0] == pts_reply[0]) &&
- ((dev->pts[1] & 0xef) == pts_reply[1]) &&
- ((pts_reply[0] ^ pts_reply[1]) == pts_reply[2])) {
- /* short PTS reply, set card parameter to default values */
- dev->baudv = calc_baudv(0x11);
- set_cardparameter(dev);
- } else
- rc = -EIO;
-
-exit_setprotocol:
- DEBUGP(3, dev, "<- set_protocol\n");
- return rc;
-}
-
-static int io_detect_cm4000(unsigned int iobase, struct cm4000_dev *dev)
-{
-
- /* note: statemachine is assumed to be reset */
- if (inb(REG_FLAGS0(iobase)) & 8) {
- clear_bit(IS_ATR_VALID, &dev->flags);
- set_bit(IS_CMM_ABSENT, &dev->flags);
- return 0; /* detect CMM = 1 -> failure */
- }
- /* xoutb(0x40, REG_FLAGS1(iobase)); detectCMM */
- xoutb(dev->flags1 | 0x40, REG_FLAGS1(iobase));
- if ((inb(REG_FLAGS0(iobase)) & 8) == 0) {
- clear_bit(IS_ATR_VALID, &dev->flags);
- set_bit(IS_CMM_ABSENT, &dev->flags);
- return 0; /* detect CMM=0 -> failure */
- }
- /* clear detectCMM again by restoring original flags1 */
- xoutb(dev->flags1, REG_FLAGS1(iobase));
- return 1;
-}
-
-static void terminate_monitor(struct cm4000_dev *dev)
-{
-
- /* tell the monitor to stop and wait until
- * it terminates.
- */
- DEBUGP(3, dev, "-> terminate_monitor\n");
- wait_event_interruptible(dev->devq,
- test_and_set_bit(LOCK_MONITOR,
- (void *)&dev->flags));
-
- /* now, LOCK_MONITOR has been set.
- * allow a last cycle in the monitor.
- * the monitor will indicate that it has
- * finished by clearing this bit.
- */
- DEBUGP(5, dev, "Now allow last cycle of monitor!\n");
- while (test_bit(LOCK_MONITOR, (void *)&dev->flags))
- msleep(25);
-
- DEBUGP(5, dev, "Delete timer\n");
- del_timer_sync(&dev->timer);
-#ifdef CM4000_DEBUG
- dev->monitor_running = 0;
-#endif
-
- DEBUGP(3, dev, "<- terminate_monitor\n");
-}
-
-/*
- * monitor the card every 50msec. as a side-effect, retrieve the
- * atr once a card is inserted. another side-effect of retrieving the
- * atr is that the card will be powered on, so there is no need to
- * power on the card explicitly from the application: the driver
- * is already doing that for you.
- */
-
-static void monitor_card(struct timer_list *t)
-{
- struct cm4000_dev *dev = from_timer(dev, t, timer);
- unsigned int iobase = dev->p_dev->resource[0]->start;
- unsigned short s;
- struct ptsreq ptsreq;
- int i, atrc;
-
- DEBUGP(7, dev, "-> monitor_card\n");
-
- /* if someone has set the lock for us: we're done! */
- if (test_and_set_bit(LOCK_MONITOR, &dev->flags)) {
- DEBUGP(4, dev, "About to stop monitor\n");
- /* no */
- dev->rlen =
- dev->rpos =
- dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
- dev->mstate = M_FETCH_ATR;
- clear_bit(LOCK_MONITOR, &dev->flags);
- /* close et al. are sleeping on devq, so wake it */
- wake_up_interruptible(&dev->devq);
- DEBUGP(2, dev, "<- monitor_card (we are done now)\n");
- return;
- }
-
- /* try to lock io: if it is already locked, just add another timer */
- if (test_and_set_bit(LOCK_IO, (void *)&dev->flags)) {
- DEBUGP(4, dev, "Couldn't get IO lock\n");
- goto return_with_timer;
- }
-
- /* is a card/a reader inserted at all ? */
- dev->flags0 = xinb(REG_FLAGS0(iobase));
- DEBUGP(7, dev, "dev->flags0 = 0x%2x\n", dev->flags0);
- DEBUGP(7, dev, "smartcard present: %s\n",
- dev->flags0 & 1 ? "yes" : "no");
- DEBUGP(7, dev, "cardman present: %s\n",
- dev->flags0 == 0xff ? "no" : "yes");
-
- if ((dev->flags0 & 1) == 0 /* no smartcard inserted */
- || dev->flags0 == 0xff) { /* no cardman inserted */
- /* no */
- dev->rlen =
- dev->rpos =
- dev->atr_csum = dev->atr_len_retry = dev->cwarn = 0;
- dev->mstate = M_FETCH_ATR;
-
- dev->flags &= 0x000000ff; /* only keep IO and MONITOR locks */
-
- if (dev->flags0 == 0xff) {
- DEBUGP(4, dev, "set IS_CMM_ABSENT bit\n");
- set_bit(IS_CMM_ABSENT, &dev->flags);
- } else if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
- DEBUGP(4, dev, "clear IS_CMM_ABSENT bit "
- "(card is removed)\n");
- clear_bit(IS_CMM_ABSENT, &dev->flags);
- }
-
- goto release_io;
- } else if ((dev->flags0 & 1) && test_bit(IS_CMM_ABSENT, &dev->flags)) {
- /* cardman and card present but cardman was absent before
- * (after suspend with inserted card) */
- DEBUGP(4, dev, "clear IS_CMM_ABSENT bit (card is inserted)\n");
- clear_bit(IS_CMM_ABSENT, &dev->flags);
- }
-
- if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
- DEBUGP(7, dev, "believe ATR is already valid (do nothing)\n");
- goto release_io;
- }
-
- switch (dev->mstate) {
- case M_CARDOFF: {
- unsigned char flags0;
-
- DEBUGP(4, dev, "M_CARDOFF\n");
- flags0 = inb(REG_FLAGS0(iobase));
- if (flags0 & 0x02) {
- /* wait until Flags0 indicate power is off */
- dev->mdelay = T_10MSEC;
- } else {
- /* Flags0 indicate power off and no card inserted now;
- * Reset CARDMAN CONTROLLER */
- xoutb(0x80, REG_FLAGS0(iobase));
-
- /* prepare for fetching ATR again: after card off ATR
- * is read again automatically */
- dev->rlen =
- dev->rpos =
- dev->atr_csum =
- dev->atr_len_retry = dev->cwarn = 0;
- dev->mstate = M_FETCH_ATR;
-
- /* minimal gap between CARDOFF and read ATR is 50msec */
- dev->mdelay = T_50MSEC;
- }
- break;
- }
- case M_FETCH_ATR:
- DEBUGP(4, dev, "M_FETCH_ATR\n");
- xoutb(0x80, REG_FLAGS0(iobase));
- DEBUGP(4, dev, "Reset BAUDV to 9600\n");
- dev->baudv = 0x173; /* 9600 */
- xoutb(0x02, REG_STOPBITS(iobase)); /* stopbits=2 */
- xoutb(0x73, REG_BAUDRATE(iobase)); /* baud value */
- xoutb(0x21, REG_FLAGS1(iobase)); /* T_Active=1, baud
- value */
- /* warm start vs. power on: */
- xoutb(dev->flags0 & 2 ? 0x46 : 0x44, REG_FLAGS0(iobase));
- dev->mdelay = T_40MSEC;
- dev->mstate = M_TIMEOUT_WAIT;
- break;
- case M_TIMEOUT_WAIT:
- DEBUGP(4, dev, "M_TIMEOUT_WAIT\n");
- /* numRecBytes */
- io_read_num_rec_bytes(iobase, &dev->atr_len);
- dev->mdelay = T_10MSEC;
- dev->mstate = M_READ_ATR_LEN;
- break;
- case M_READ_ATR_LEN:
- DEBUGP(4, dev, "M_READ_ATR_LEN\n");
- /* infinite loop possible, since there is no timeout */
-
-#define MAX_ATR_LEN_RETRY 100
-
- if (dev->atr_len == io_read_num_rec_bytes(iobase, &s)) {
- if (dev->atr_len_retry++ >= MAX_ATR_LEN_RETRY) { /* + XX msec */
- dev->mdelay = T_10MSEC;
- dev->mstate = M_READ_ATR;
- }
- } else {
- dev->atr_len = s;
- dev->atr_len_retry = 0; /* set new timeout */
- }
-
- DEBUGP(4, dev, "Current ATR_LEN = %i\n", dev->atr_len);
- break;
- case M_READ_ATR:
- DEBUGP(4, dev, "M_READ_ATR\n");
- xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */
- for (i = 0; i < dev->atr_len; i++) {
- xoutb(i, REG_BUF_ADDR(iobase));
- dev->atr[i] = inb(REG_BUF_DATA(iobase));
- }
- /* Deactivate T_Active flags */
- DEBUGP(4, dev, "Deactivate T_Active flags\n");
- dev->flags1 = 0x01;
- xoutb(dev->flags1, REG_FLAGS1(iobase));
-
- /* atr is present (which doesn't mean it's valid) */
- set_bit(IS_ATR_PRESENT, &dev->flags);
- if (dev->atr[0] == 0x03)
- str_invert_revert(dev->atr, dev->atr_len);
- atrc = parse_atr(dev);
- if (atrc == 0) { /* atr invalid */
- dev->mdelay = 0;
- dev->mstate = M_BAD_CARD;
- } else {
- dev->mdelay = T_50MSEC;
- dev->mstate = M_ATR_PRESENT;
- set_bit(IS_ATR_VALID, &dev->flags);
- }
-
- if (test_bit(IS_ATR_VALID, &dev->flags) == 1) {
- DEBUGP(4, dev, "monitor_card: ATR valid\n");
- /* if ta1 == 0x11, no PPS necessary (default values) */
- /* do not do PPS with multi protocol cards */
- if ((test_bit(IS_AUTOPPS_ACT, &dev->flags) == 0) &&
- (dev->ta1 != 0x11) &&
- !(test_bit(IS_ANY_T0, &dev->flags) &&
- test_bit(IS_ANY_T1, &dev->flags))) {
- DEBUGP(4, dev, "Perform AUTOPPS\n");
- set_bit(IS_AUTOPPS_ACT, &dev->flags);
- ptsreq.protocol = (0x01 << dev->proto);
- ptsreq.flags = 0x01;
- ptsreq.pts1 = 0x00;
- ptsreq.pts2 = 0x00;
- ptsreq.pts3 = 0x00;
- if (set_protocol(dev, &ptsreq) == 0) {
- DEBUGP(4, dev, "AUTOPPS ret SUCC\n");
- clear_bit(IS_AUTOPPS_ACT, &dev->flags);
- wake_up_interruptible(&dev->atrq);
- } else {
- DEBUGP(4, dev, "AUTOPPS failed: "
- "repower using defaults\n");
- /* prepare for repowering */
- clear_bit(IS_ATR_PRESENT, &dev->flags);
- clear_bit(IS_ATR_VALID, &dev->flags);
- dev->rlen =
- dev->rpos =
- dev->atr_csum =
- dev->atr_len_retry = dev->cwarn = 0;
- dev->mstate = M_FETCH_ATR;
-
- dev->mdelay = T_50MSEC;
- }
- } else {
- /* for cards which use slightly different
- * params (extra guard time) */
- set_cardparameter(dev);
- if (test_bit(IS_AUTOPPS_ACT, &dev->flags) == 1)
- DEBUGP(4, dev, "AUTOPPS already active "
- "2nd try:use default values\n");
- if (dev->ta1 == 0x11)
- DEBUGP(4, dev, "No AUTOPPS necessary "
- "TA(1)==0x11\n");
- if (test_bit(IS_ANY_T0, &dev->flags)
- && test_bit(IS_ANY_T1, &dev->flags))
- DEBUGP(4, dev, "Do NOT perform AUTOPPS "
- "with multiprotocol cards\n");
- clear_bit(IS_AUTOPPS_ACT, &dev->flags);
- wake_up_interruptible(&dev->atrq);
- }
- } else {
- DEBUGP(4, dev, "ATR invalid\n");
- wake_up_interruptible(&dev->atrq);
- }
- break;
- case M_BAD_CARD:
- DEBUGP(4, dev, "M_BAD_CARD\n");
- /* slow down warning, but prompt immediately after insertion */
- if (dev->cwarn == 0 || dev->cwarn == 10) {
- set_bit(IS_BAD_CARD, &dev->flags);
- dev_warn(&dev->p_dev->dev, MODULE_NAME ": ");
- if (test_bit(IS_BAD_CSUM, &dev->flags)) {
- DEBUGP(4, dev, "ATR checksum (0x%.2x, should "
- "be zero) failed\n", dev->atr_csum);
- }
-#ifdef CM4000_DEBUG
- else if (test_bit(IS_BAD_LENGTH, &dev->flags)) {
- DEBUGP(4, dev, "ATR length error\n");
- } else {
- DEBUGP(4, dev, "card damaged or wrong way "
- "inserted\n");
- }
-#endif
- dev->cwarn = 0;
- wake_up_interruptible(&dev->atrq); /* wake open */
- }
- dev->cwarn++;
- dev->mdelay = T_100MSEC;
- dev->mstate = M_FETCH_ATR;
- break;
- default:
- DEBUGP(7, dev, "Unknown action\n");
- break; /* nothing */
- }
-
-release_io:
- DEBUGP(7, dev, "release_io\n");
- clear_bit(LOCK_IO, &dev->flags);
- wake_up_interruptible(&dev->ioq); /* whoever needs IO */
-
-return_with_timer:
- DEBUGP(7, dev, "<- monitor_card (returns with timer)\n");
- mod_timer(&dev->timer, jiffies + dev->mdelay);
- clear_bit(LOCK_MONITOR, &dev->flags);
-}
-
-/* Interface to userland (file_operations) */
-
-static ssize_t cmm_read(struct file *filp, __user char *buf, size_t count,
- loff_t *ppos)
-{
- struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->resource[0]->start;
- ssize_t rc;
- int i, j, k;
-
- DEBUGP(2, dev, "-> cmm_read(%s,%d)\n", current->comm, current->pid);
-
- if (count == 0) /* according to manpage */
- return 0;
-
- if (!pcmcia_dev_present(dev->p_dev) || /* device removed */
- test_bit(IS_CMM_ABSENT, &dev->flags))
- return -ENODEV;
-
- if (test_bit(IS_BAD_CSUM, &dev->flags))
- return -EIO;
-
- /* also see the note about this in cmm_write */
- if (wait_event_interruptible
- (dev->atrq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
- if (test_bit(IS_ATR_VALID, &dev->flags) == 0)
- return -EIO;
-
- /* this one implements blocking IO */
- if (wait_event_interruptible
- (dev->readq,
- ((filp->f_flags & O_NONBLOCK) || (dev->rpos < dev->rlen)))) {
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
- /* lock io */
- if (wait_event_interruptible
- (dev->ioq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
- rc = 0;
- dev->flags0 = inb(REG_FLAGS0(iobase));
- if ((dev->flags0 & 1) == 0 /* no smartcard inserted */
- || dev->flags0 == 0xff) { /* no cardman inserted */
- clear_bit(IS_ATR_VALID, &dev->flags);
- if (dev->flags0 & 1) {
- set_bit(IS_CMM_ABSENT, &dev->flags);
- rc = -ENODEV;
- } else {
- rc = -EIO;
- }
- goto release_io;
- }
-
- DEBUGP(4, dev, "begin read answer\n");
- j = min(count, (size_t)(dev->rlen - dev->rpos));
- k = dev->rpos;
- if (k + j > 255)
- j = 256 - k;
- DEBUGP(4, dev, "read1 j=%d\n", j);
- for (i = 0; i < j; i++) {
- xoutb(k++, REG_BUF_ADDR(iobase));
- dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
- }
- j = min(count, (size_t)(dev->rlen - dev->rpos));
- if (k + j > 255) {
- DEBUGP(4, dev, "read2 j=%d\n", j);
- dev->flags1 |= 0x10; /* MSB buf addr set */
- xoutb(dev->flags1, REG_FLAGS1(iobase));
- for (; i < j; i++) {
- xoutb(k++, REG_BUF_ADDR(iobase));
- dev->rbuf[i] = xinb(REG_BUF_DATA(iobase));
- }
- }
-
- if (dev->proto == 0 && count > dev->rlen - dev->rpos && i) {
- DEBUGP(4, dev, "T=0 and count > buffer\n");
- dev->rbuf[i] = dev->rbuf[i - 1];
- dev->rbuf[i - 1] = dev->procbyte;
- j++;
- }
- count = j;
-
- dev->rpos = dev->rlen + 1;
-
- /* Clear T1Active */
- DEBUGP(4, dev, "Clear T1Active\n");
- dev->flags1 &= 0xdf;
- xoutb(dev->flags1, REG_FLAGS1(iobase));
-
- xoutb(0, REG_FLAGS1(iobase)); /* clear detectCMM */
- /* last check before exit */
- if (!io_detect_cm4000(iobase, dev)) {
- rc = -ENODEV;
- goto release_io;
- }
-
- if (test_bit(IS_INVREV, &dev->flags) && count > 0)
- str_invert_revert(dev->rbuf, count);
-
- if (copy_to_user(buf, dev->rbuf, count))
- rc = -EFAULT;
-
-release_io:
- clear_bit(LOCK_IO, &dev->flags);
- wake_up_interruptible(&dev->ioq);
-
- DEBUGP(2, dev, "<- cmm_read returns: rc = %zi\n",
- (rc < 0 ? rc : count));
- return rc < 0 ? rc : count;
-}
-
-static ssize_t cmm_write(struct file *filp, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->resource[0]->start;
- unsigned short s;
- unsigned char infolen;
- unsigned char sendT0;
- unsigned short nsend;
- unsigned short nr;
- ssize_t rc;
- int i;
-
- DEBUGP(2, dev, "-> cmm_write(%s,%d)\n", current->comm, current->pid);
-
- if (count == 0) /* according to manpage */
- return 0;
-
- if (dev->proto == 0 && count < 4) {
- /* T0 must have at least 4 bytes */
- DEBUGP(4, dev, "T0 short write\n");
- return -EIO;
- }
-
- nr = count & 0x1ff; /* max bytes to write */
-
- sendT0 = dev->proto ? 0 : nr > 5 ? 0x08 : 0;
-
- if (!pcmcia_dev_present(dev->p_dev) || /* device removed */
- test_bit(IS_CMM_ABSENT, &dev->flags))
- return -ENODEV;
-
- if (test_bit(IS_BAD_CSUM, &dev->flags)) {
- DEBUGP(4, dev, "bad csum\n");
- return -EIO;
- }
-
- /*
- * wait for atr to become valid.
- * note: it is important to lock this code. if we dont, the monitor
- * could be run between test_bit and the call to sleep on the
- * atr-queue. if *then* the monitor detects atr valid, it will wake up
- * any process on the atr-queue, *but* since we have been interrupted,
- * we do not yet sleep on this queue. this would result in a missed
- * wake_up and the calling process would sleep forever (until
- * interrupted). also, do *not* restore_flags before sleep_on, because
- * this could result in the same situation!
- */
- if (wait_event_interruptible
- (dev->atrq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags) != 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
- if (test_bit(IS_ATR_VALID, &dev->flags) == 0) { /* invalid atr */
- DEBUGP(4, dev, "invalid ATR\n");
- return -EIO;
- }
-
- /* lock io */
- if (wait_event_interruptible
- (dev->ioq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_and_set_bit(LOCK_IO, (void *)&dev->flags) == 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- return -EAGAIN;
- return -ERESTARTSYS;
- }
-
- if (copy_from_user(dev->sbuf, buf, ((count > 512) ? 512 : count)))
- return -EFAULT;
-
- rc = 0;
- dev->flags0 = inb(REG_FLAGS0(iobase));
- if ((dev->flags0 & 1) == 0 /* no smartcard inserted */
- || dev->flags0 == 0xff) { /* no cardman inserted */
- clear_bit(IS_ATR_VALID, &dev->flags);
- if (dev->flags0 & 1) {
- set_bit(IS_CMM_ABSENT, &dev->flags);
- rc = -ENODEV;
- } else {
- DEBUGP(4, dev, "IO error\n");
- rc = -EIO;
- }
- goto release_io;
- }
-
- xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */
-
- if (!io_detect_cm4000(iobase, dev)) {
- rc = -ENODEV;
- goto release_io;
- }
-
- /* reflect T=0 send/read mode in flags1 */
- dev->flags1 |= (sendT0);
-
- set_cardparameter(dev);
-
- /* dummy read, reset flag procedure received */
- inb(REG_FLAGS1(iobase));
-
- dev->flags1 = 0x20 /* T_Active */
- | (sendT0)
- | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)/* inverse parity */
- | (((dev->baudv - 1) & 0x0100) >> 8); /* MSB-Baud */
- DEBUGP(1, dev, "set dev->flags1 = 0x%.2x\n", dev->flags1);
- xoutb(dev->flags1, REG_FLAGS1(iobase));
-
- /* xmit data */
- DEBUGP(4, dev, "Xmit data\n");
- for (i = 0; i < nr; i++) {
- if (i >= 256) {
- dev->flags1 = 0x20 /* T_Active */
- | (sendT0) /* SendT0 */
- /* inverse parity: */
- | (test_bit(IS_INVREV, &dev->flags) ? 2 : 0)
- | (((dev->baudv - 1) & 0x0100) >> 8) /* MSB-Baud */
- | 0x10; /* set address high */
- DEBUGP(4, dev, "dev->flags = 0x%.2x - set address "
- "high\n", dev->flags1);
- xoutb(dev->flags1, REG_FLAGS1(iobase));
- }
- if (test_bit(IS_INVREV, &dev->flags)) {
- DEBUGP(4, dev, "Apply inverse convention for 0x%.2x "
- "-> 0x%.2x\n", (unsigned char)dev->sbuf[i],
- invert_revert(dev->sbuf[i]));
- xoutb(i, REG_BUF_ADDR(iobase));
- xoutb(invert_revert(dev->sbuf[i]),
- REG_BUF_DATA(iobase));
- } else {
- xoutb(i, REG_BUF_ADDR(iobase));
- xoutb(dev->sbuf[i], REG_BUF_DATA(iobase));
- }
- }
- DEBUGP(4, dev, "Xmit done\n");
-
- if (dev->proto == 0) {
- /* T=0 proto: 0 byte reply */
- if (nr == 4) {
- DEBUGP(4, dev, "T=0 assumes 0 byte reply\n");
- xoutb(i, REG_BUF_ADDR(iobase));
- if (test_bit(IS_INVREV, &dev->flags))
- xoutb(0xff, REG_BUF_DATA(iobase));
- else
- xoutb(0x00, REG_BUF_DATA(iobase));
- }
-
- /* numSendBytes */
- if (sendT0)
- nsend = nr;
- else {
- if (nr == 4)
- nsend = 5;
- else {
- nsend = 5 + (unsigned char)dev->sbuf[4];
- if (dev->sbuf[4] == 0)
- nsend += 0x100;
- }
- }
- } else
- nsend = nr;
-
- /* T0: output procedure byte */
- if (test_bit(IS_INVREV, &dev->flags)) {
- DEBUGP(4, dev, "T=0 set Procedure byte (inverse-reverse) "
- "0x%.2x\n", invert_revert(dev->sbuf[1]));
- xoutb(invert_revert(dev->sbuf[1]), REG_NUM_BYTES(iobase));
- } else {
- DEBUGP(4, dev, "T=0 set Procedure byte 0x%.2x\n", dev->sbuf[1]);
- xoutb(dev->sbuf[1], REG_NUM_BYTES(iobase));
- }
-
- DEBUGP(1, dev, "set NumSendBytes = 0x%.2x\n",
- (unsigned char)(nsend & 0xff));
- xoutb((unsigned char)(nsend & 0xff), REG_NUM_SEND(iobase));
-
- DEBUGP(1, dev, "Trigger CARDMAN CONTROLLER (0x%.2x)\n",
- 0x40 /* SM_Active */
- | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */
- |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */
- |(nsend & 0x100) >> 8 /* MSB numSendBytes */ );
- xoutb(0x40 /* SM_Active */
- | (dev->flags0 & 2 ? 0 : 4) /* power on if needed */
- |(dev->proto ? 0x10 : 0x08) /* T=1/T=0 */
- |(nsend & 0x100) >> 8, /* MSB numSendBytes */
- REG_FLAGS0(iobase));
-
- /* wait for xmit done */
- if (dev->proto == 1) {
- DEBUGP(4, dev, "Wait for xmit done\n");
- for (i = 0; i < 1000; i++) {
- if (inb(REG_FLAGS0(iobase)) & 0x08)
- break;
- msleep_interruptible(10);
- }
- if (i == 1000) {
- DEBUGP(4, dev, "timeout waiting for xmit done\n");
- rc = -EIO;
- goto release_io;
- }
- }
-
- /* T=1: wait for infoLen */
-
- infolen = 0;
- if (dev->proto) {
- /* wait until infoLen is valid */
- for (i = 0; i < 6000; i++) { /* max waiting time of 1 min */
- io_read_num_rec_bytes(iobase, &s);
- if (s >= 3) {
- infolen = inb(REG_FLAGS1(iobase));
- DEBUGP(4, dev, "infolen=%d\n", infolen);
- break;
- }
- msleep_interruptible(10);
- }
- if (i == 6000) {
- DEBUGP(4, dev, "timeout waiting for infoLen\n");
- rc = -EIO;
- goto release_io;
- }
- } else
- clear_bit(IS_PROCBYTE_PRESENT, &dev->flags);
-
- /* numRecBytes | bit9 of numRecytes */
- io_read_num_rec_bytes(iobase, &dev->rlen);
- for (i = 0; i < 600; i++) { /* max waiting time of 2 sec */
- if (dev->proto) {
- if (dev->rlen >= infolen + 4)
- break;
- }
- msleep_interruptible(10);
- /* numRecBytes | bit9 of numRecytes */
- io_read_num_rec_bytes(iobase, &s);
- if (s > dev->rlen) {
- DEBUGP(1, dev, "NumRecBytes inc (reset timeout)\n");
- i = 0; /* reset timeout */
- dev->rlen = s;
- }
- /* T=0: we are done when numRecBytes doesn't
- * increment any more and NoProcedureByte
- * is set and numRecBytes == bytes sent + 6
- * (header bytes + data + 1 for sw2)
- * except when the card replies an error
- * which means, no data will be sent back.
- */
- else if (dev->proto == 0) {
- if ((inb(REG_BUF_ADDR(iobase)) & 0x80)) {
- /* no procedure byte received since last read */
- DEBUGP(1, dev, "NoProcedure byte set\n");
- /* i=0; */
- } else {
- /* procedure byte received since last read */
- DEBUGP(1, dev, "NoProcedure byte unset "
- "(reset timeout)\n");
- dev->procbyte = inb(REG_FLAGS1(iobase));
- DEBUGP(1, dev, "Read procedure byte 0x%.2x\n",
- dev->procbyte);
- i = 0; /* resettimeout */
- }
- if (inb(REG_FLAGS0(iobase)) & 0x08) {
- DEBUGP(1, dev, "T0Done flag (read reply)\n");
- break;
- }
- }
- if (dev->proto)
- infolen = inb(REG_FLAGS1(iobase));
- }
- if (i == 600) {
- DEBUGP(1, dev, "timeout waiting for numRecBytes\n");
- rc = -EIO;
- goto release_io;
- } else {
- if (dev->proto == 0) {
- DEBUGP(1, dev, "Wait for T0Done bit to be set\n");
- for (i = 0; i < 1000; i++) {
- if (inb(REG_FLAGS0(iobase)) & 0x08)
- break;
- msleep_interruptible(10);
- }
- if (i == 1000) {
- DEBUGP(1, dev, "timeout waiting for T0Done\n");
- rc = -EIO;
- goto release_io;
- }
-
- dev->procbyte = inb(REG_FLAGS1(iobase));
- DEBUGP(4, dev, "Read procedure byte 0x%.2x\n",
- dev->procbyte);
-
- io_read_num_rec_bytes(iobase, &dev->rlen);
- DEBUGP(4, dev, "Read NumRecBytes = %i\n", dev->rlen);
-
- }
- }
- /* T=1: read offset=zero, T=0: read offset=after challenge */
- dev->rpos = dev->proto ? 0 : nr == 4 ? 5 : nr > dev->rlen ? 5 : nr;
- DEBUGP(4, dev, "dev->rlen = %i, dev->rpos = %i, nr = %i\n",
- dev->rlen, dev->rpos, nr);
-
-release_io:
- DEBUGP(4, dev, "Reset SM\n");
- xoutb(0x80, REG_FLAGS0(iobase)); /* reset SM */
-
- if (rc < 0) {
- DEBUGP(4, dev, "Write failed but clear T_Active\n");
- dev->flags1 &= 0xdf;
- xoutb(dev->flags1, REG_FLAGS1(iobase));
- }
-
- clear_bit(LOCK_IO, &dev->flags);
- wake_up_interruptible(&dev->ioq);
- wake_up_interruptible(&dev->readq); /* tell read we have data */
-
- /* ITSEC E2: clear write buffer */
- memset((char *)dev->sbuf, 0, 512);
-
- /* return error or actually written bytes */
- DEBUGP(2, dev, "<- cmm_write\n");
- return rc < 0 ? rc : nr;
-}
-
-static void start_monitor(struct cm4000_dev *dev)
-{
- DEBUGP(3, dev, "-> start_monitor\n");
- if (!dev->monitor_running) {
- DEBUGP(5, dev, "create, init and add timer\n");
- timer_setup(&dev->timer, monitor_card, 0);
- dev->monitor_running = 1;
- mod_timer(&dev->timer, jiffies);
- } else
- DEBUGP(5, dev, "monitor already running\n");
- DEBUGP(3, dev, "<- start_monitor\n");
-}
-
-static void stop_monitor(struct cm4000_dev *dev)
-{
- DEBUGP(3, dev, "-> stop_monitor\n");
- if (dev->monitor_running) {
- DEBUGP(5, dev, "stopping monitor\n");
- terminate_monitor(dev);
- /* reset monitor SM */
- clear_bit(IS_ATR_VALID, &dev->flags);
- clear_bit(IS_ATR_PRESENT, &dev->flags);
- } else
- DEBUGP(5, dev, "monitor already stopped\n");
- DEBUGP(3, dev, "<- stop_monitor\n");
-}
-
-static long cmm_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
-{
- struct cm4000_dev *dev = filp->private_data;
- unsigned int iobase = dev->p_dev->resource[0]->start;
- struct inode *inode = file_inode(filp);
- struct pcmcia_device *link;
- int rc;
- void __user *argp = (void __user *)arg;
-#ifdef CM4000_DEBUG
- char *ioctl_names[CM_IOC_MAXNR + 1] = {
- [_IOC_NR(CM_IOCGSTATUS)] "CM_IOCGSTATUS",
- [_IOC_NR(CM_IOCGATR)] "CM_IOCGATR",
- [_IOC_NR(CM_IOCARDOFF)] "CM_IOCARDOFF",
- [_IOC_NR(CM_IOCSPTS)] "CM_IOCSPTS",
- [_IOC_NR(CM_IOSDBGLVL)] "CM4000_DBGLVL",
- };
- DEBUGP(3, dev, "cmm_ioctl(device=%d.%d) %s\n", imajor(inode),
- iminor(inode), ioctl_names[_IOC_NR(cmd)]);
-#endif
-
- mutex_lock(&cmm_mutex);
- rc = -ENODEV;
- link = dev_table[iminor(inode)];
- if (!pcmcia_dev_present(link)) {
- DEBUGP(4, dev, "DEV_OK false\n");
- goto out;
- }
-
- if (test_bit(IS_CMM_ABSENT, &dev->flags)) {
- DEBUGP(4, dev, "CMM_ABSENT flag set\n");
- goto out;
- }
- rc = -EINVAL;
-
- if (_IOC_TYPE(cmd) != CM_IOC_MAGIC) {
- DEBUGP(4, dev, "ioctype mismatch\n");
- goto out;
- }
- if (_IOC_NR(cmd) > CM_IOC_MAXNR) {
- DEBUGP(4, dev, "iocnr mismatch\n");
- goto out;
- }
- rc = 0;
-
- switch (cmd) {
- case CM_IOCGSTATUS:
- DEBUGP(4, dev, " ... in CM_IOCGSTATUS\n");
- {
- int status;
-
- /* clear other bits, but leave inserted & powered as
- * they are */
- status = dev->flags0 & 3;
- if (test_bit(IS_ATR_PRESENT, &dev->flags))
- status |= CM_ATR_PRESENT;
- if (test_bit(IS_ATR_VALID, &dev->flags))
- status |= CM_ATR_VALID;
- if (test_bit(IS_CMM_ABSENT, &dev->flags))
- status |= CM_NO_READER;
- if (test_bit(IS_BAD_CARD, &dev->flags))
- status |= CM_BAD_CARD;
- if (copy_to_user(argp, &status, sizeof(int)))
- rc = -EFAULT;
- }
- break;
- case CM_IOCGATR:
- DEBUGP(4, dev, "... in CM_IOCGATR\n");
- {
- struct atreq __user *atreq = argp;
- int tmp;
- /* allow nonblocking io and being interrupted */
- if (wait_event_interruptible
- (dev->atrq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
- != 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- rc = -EAGAIN;
- else
- rc = -ERESTARTSYS;
- break;
- }
-
- rc = -EFAULT;
- if (test_bit(IS_ATR_VALID, &dev->flags) == 0) {
- tmp = -1;
- if (copy_to_user(&(atreq->atr_len), &tmp,
- sizeof(int)))
- break;
- } else {
- if (copy_to_user(atreq->atr, dev->atr,
- dev->atr_len))
- break;
-
- tmp = dev->atr_len;
- if (copy_to_user(&(atreq->atr_len), &tmp, sizeof(int)))
- break;
- }
- rc = 0;
- break;
- }
- case CM_IOCARDOFF:
-
-#ifdef CM4000_DEBUG
- DEBUGP(4, dev, "... in CM_IOCARDOFF\n");
- if (dev->flags0 & 0x01) {
- DEBUGP(4, dev, " Card inserted\n");
- } else {
- DEBUGP(2, dev, " No card inserted\n");
- }
- if (dev->flags0 & 0x02) {
- DEBUGP(4, dev, " Card powered\n");
- } else {
- DEBUGP(2, dev, " Card not powered\n");
- }
-#endif
-
- /* is a card inserted and powered? */
- if ((dev->flags0 & 0x01) && (dev->flags0 & 0x02)) {
-
- /* get IO lock */
- if (wait_event_interruptible
- (dev->ioq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
- == 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- rc = -EAGAIN;
- else
- rc = -ERESTARTSYS;
- break;
- }
- /* Set Flags0 = 0x42 */
- DEBUGP(4, dev, "Set Flags0=0x42 \n");
- xoutb(0x42, REG_FLAGS0(iobase));
- clear_bit(IS_ATR_PRESENT, &dev->flags);
- clear_bit(IS_ATR_VALID, &dev->flags);
- dev->mstate = M_CARDOFF;
- clear_bit(LOCK_IO, &dev->flags);
- if (wait_event_interruptible
- (dev->atrq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_bit(IS_ATR_VALID, (void *)&dev->flags) !=
- 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- rc = -EAGAIN;
- else
- rc = -ERESTARTSYS;
- break;
- }
- }
- /* release lock */
- clear_bit(LOCK_IO, &dev->flags);
- wake_up_interruptible(&dev->ioq);
-
- rc = 0;
- break;
- case CM_IOCSPTS:
- {
- struct ptsreq krnptsreq;
-
- if (copy_from_user(&krnptsreq, argp,
- sizeof(struct ptsreq))) {
- rc = -EFAULT;
- break;
- }
-
- rc = 0;
- DEBUGP(4, dev, "... in CM_IOCSPTS\n");
- /* wait for ATR to get valid */
- if (wait_event_interruptible
- (dev->atrq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_bit(IS_ATR_PRESENT, (void *)&dev->flags)
- != 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- rc = -EAGAIN;
- else
- rc = -ERESTARTSYS;
- break;
- }
- /* get IO lock */
- if (wait_event_interruptible
- (dev->ioq,
- ((filp->f_flags & O_NONBLOCK)
- || (test_and_set_bit(LOCK_IO, (void *)&dev->flags)
- == 0)))) {
- if (filp->f_flags & O_NONBLOCK)
- rc = -EAGAIN;
- else
- rc = -ERESTARTSYS;
- break;
- }
-
- if ((rc = set_protocol(dev, &krnptsreq)) != 0) {
- /* auto power_on again */
- dev->mstate = M_FETCH_ATR;
- clear_bit(IS_ATR_VALID, &dev->flags);
- }
- /* release lock */
- clear_bit(LOCK_IO, &dev->flags);
- wake_up_interruptible(&dev->ioq);
-
- }
- break;
-#ifdef CM4000_DEBUG
- case CM_IOSDBGLVL:
- rc = -ENOTTY;
- break;
-#endif
- default:
- DEBUGP(4, dev, "... in default (unknown IOCTL code)\n");
- rc = -ENOTTY;
- }
-out:
- mutex_unlock(&cmm_mutex);
- return rc;
-}
-
-static int cmm_open(struct inode *inode, struct file *filp)
-{
- struct cm4000_dev *dev;
- struct pcmcia_device *link;
- int minor = iminor(inode);
- int ret;
-
- if (minor >= CM4000_MAX_DEV)
- return -ENODEV;
-
- mutex_lock(&cmm_mutex);
- link = dev_table[minor];
- if (link == NULL || !pcmcia_dev_present(link)) {
- ret = -ENODEV;
- goto out;
- }
-
- if (link->open) {
- ret = -EBUSY;
- goto out;
- }
-
- dev = link->priv;
- filp->private_data = dev;
-
- DEBUGP(2, dev, "-> cmm_open(device=%d.%d process=%s,%d)\n",
- imajor(inode), minor, current->comm, current->pid);
-
- /* init device variables, they may be "polluted" after close
- * or, the device may never have been closed (i.e. open failed)
- */
-
- ZERO_DEV(dev);
-
- /* opening will always block since the
- * monitor will be started by open, which
- * means we have to wait for ATR becoming
- * valid = block until valid (or card
- * inserted)
- */
- if (filp->f_flags & O_NONBLOCK) {
- ret = -EAGAIN;
- goto out;
- }
-
- dev->mdelay = T_50MSEC;
-
- /* start monitoring the cardstatus */
- start_monitor(dev);
-
- link->open = 1; /* only one open per device */
-
- DEBUGP(2, dev, "<- cmm_open\n");
- ret = stream_open(inode, filp);
-out:
- mutex_unlock(&cmm_mutex);
- return ret;
-}
-
-static int cmm_close(struct inode *inode, struct file *filp)
-{
- struct cm4000_dev *dev;
- struct pcmcia_device *link;
- int minor = iminor(inode);
-
- if (minor >= CM4000_MAX_DEV)
- return -ENODEV;
-
- link = dev_table[minor];
- if (link == NULL)
- return -ENODEV;
-
- dev = link->priv;
-
- DEBUGP(2, dev, "-> cmm_close(maj/min=%d.%d)\n",
- imajor(inode), minor);
-
- stop_monitor(dev);
-
- ZERO_DEV(dev);
-
- link->open = 0; /* only one open per device */
- wake_up(&dev->devq); /* socket removed? */
-
- DEBUGP(2, dev, "cmm_close\n");
- return 0;
-}
-
-static void cmm_cm4000_release(struct pcmcia_device * link)
-{
- struct cm4000_dev *dev = link->priv;
-
- /* dont terminate the monitor, rather rely on
- * close doing that for us.
- */
- DEBUGP(3, dev, "-> cmm_cm4000_release\n");
- while (link->open) {
- printk(KERN_INFO MODULE_NAME ": delaying release until "
- "process has terminated\n");
- /* note: don't interrupt us:
- * close the applications which own
- * the devices _first_ !
- */
- wait_event(dev->devq, (link->open == 0));
- }
- /* dev->devq=NULL; this cannot be zeroed earlier */
- DEBUGP(3, dev, "<- cmm_cm4000_release\n");
- return;
-}
-
-/*==== Interface to PCMCIA Layer =======================================*/
-
-static int cm4000_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- return pcmcia_request_io(p_dev);
-}
-
-static int cm4000_config(struct pcmcia_device * link, int devno)
-{
- link->config_flags |= CONF_AUTO_SET_IO;
-
- /* read the config-tuples */
- if (pcmcia_loop_config(link, cm4000_config_check, NULL))
- goto cs_release;
-
- if (pcmcia_enable_device(link))
- goto cs_release;
-
- return 0;
-
-cs_release:
- cm4000_release(link);
- return -ENODEV;
-}
-
-static int cm4000_suspend(struct pcmcia_device *link)
-{
- struct cm4000_dev *dev;
-
- dev = link->priv;
- stop_monitor(dev);
-
- return 0;
-}
-
-static int cm4000_resume(struct pcmcia_device *link)
-{
- struct cm4000_dev *dev;
-
- dev = link->priv;
- if (link->open)
- start_monitor(dev);
-
- return 0;
-}
-
-static void cm4000_release(struct pcmcia_device *link)
-{
- cmm_cm4000_release(link); /* delay release until device closed */
- pcmcia_disable_device(link);
-}
-
-static int cm4000_probe(struct pcmcia_device *link)
-{
- struct cm4000_dev *dev;
- int i, ret;
-
- for (i = 0; i < CM4000_MAX_DEV; i++)
- if (dev_table[i] == NULL)
- break;
-
- if (i == CM4000_MAX_DEV) {
- printk(KERN_NOTICE MODULE_NAME ": all devices in use\n");
- return -ENODEV;
- }
-
- /* create a new cm4000_cs device */
- dev = kzalloc(sizeof(struct cm4000_dev), GFP_KERNEL);
- if (dev == NULL)
- return -ENOMEM;
-
- dev->p_dev = link;
- link->priv = dev;
- dev_table[i] = link;
-
- init_waitqueue_head(&dev->devq);
- init_waitqueue_head(&dev->ioq);
- init_waitqueue_head(&dev->atrq);
- init_waitqueue_head(&dev->readq);
-
- ret = cm4000_config(link, i);
- if (ret) {
- dev_table[i] = NULL;
- kfree(dev);
- return ret;
- }
-
- device_create(cmm_class, NULL, MKDEV(major, i), NULL, "cmm%d", i);
-
- return 0;
-}
-
-static void cm4000_detach(struct pcmcia_device *link)
-{
- struct cm4000_dev *dev = link->priv;
- int devno;
-
- /* find device */
- for (devno = 0; devno < CM4000_MAX_DEV; devno++)
- if (dev_table[devno] == link)
- break;
- if (devno == CM4000_MAX_DEV)
- return;
-
- stop_monitor(dev);
-
- cm4000_release(link);
-
- dev_table[devno] = NULL;
- kfree(dev);
-
- device_destroy(cmm_class, MKDEV(major, devno));
-
- return;
-}
-
-static const struct file_operations cm4000_fops = {
- .owner = THIS_MODULE,
- .read = cmm_read,
- .write = cmm_write,
- .unlocked_ioctl = cmm_ioctl,
- .open = cmm_open,
- .release= cmm_close,
- .llseek = no_llseek,
-};
-
-static const struct pcmcia_device_id cm4000_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0002),
- PCMCIA_DEVICE_PROD_ID12("CardMan", "4000", 0x2FB368CA, 0xA2BD8C39),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, cm4000_ids);
-
-static struct pcmcia_driver cm4000_driver = {
- .owner = THIS_MODULE,
- .name = "cm4000_cs",
- .probe = cm4000_probe,
- .remove = cm4000_detach,
- .suspend = cm4000_suspend,
- .resume = cm4000_resume,
- .id_table = cm4000_ids,
-};
-
-static int __init cmm_init(void)
-{
- int rc;
-
- cmm_class = class_create("cardman_4000");
- if (IS_ERR(cmm_class))
- return PTR_ERR(cmm_class);
-
- major = register_chrdev(0, DEVICE_NAME, &cm4000_fops);
- if (major < 0) {
- printk(KERN_WARNING MODULE_NAME
- ": could not get major number\n");
- class_destroy(cmm_class);
- return major;
- }
-
- rc = pcmcia_register_driver(&cm4000_driver);
- if (rc < 0) {
- unregister_chrdev(major, DEVICE_NAME);
- class_destroy(cmm_class);
- return rc;
- }
-
- return 0;
-}
-
-static void __exit cmm_exit(void)
-{
- pcmcia_unregister_driver(&cm4000_driver);
- unregister_chrdev(major, DEVICE_NAME);
- class_destroy(cmm_class);
-};
-
-module_init(cmm_init);
-module_exit(cmm_exit);
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/char/pcmcia/cm4040_cs.c b/drivers/char/pcmcia/cm4040_cs.c
deleted file mode 100644
index 11ff59e2b963..000000000000
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ /dev/null
@@ -1,684 +0,0 @@
-/*
- * A driver for the Omnikey PCMCIA smartcard reader CardMan 4040
- *
- * (c) 2000-2004 Omnikey AG (http://www.omnikey.com/)
- *
- * (C) 2005-2006 Harald Welte <laforge@gnumonks.org>
- * - add support for poll()
- * - driver cleanup
- * - add waitqueues
- * - adhere to linux kernel coding style and policies
- * - support 2.6.13 "new style" pcmcia interface
- * - add class interface for udev device creation
- *
- * The device basically is a USB CCID compliant device that has been
- * attached to an I/O-Mapped FIFO.
- *
- * All rights reserved, Dual BSD/GPL Licensed.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/poll.h>
-#include <linux/mutex.h>
-#include <linux/wait.h>
-#include <linux/uaccess.h>
-#include <asm/io.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-#include <pcmcia/ds.h>
-
-#include "cm4040_cs.h"
-
-
-#define reader_to_dev(x) (&x->p_dev->dev)
-
-/* n (debug level) is ignored */
-/* additional debug output may be enabled by re-compiling with
- * CM4040_DEBUG set */
-/* #define CM4040_DEBUG */
-#define DEBUGP(n, rdr, x, args...) do { \
- dev_dbg(reader_to_dev(rdr), "%s:" x, \
- __func__ , ## args); \
- } while (0)
-
-static DEFINE_MUTEX(cm4040_mutex);
-
-#define CCID_DRIVER_BULK_DEFAULT_TIMEOUT (150*HZ)
-#define CCID_DRIVER_ASYNC_POWERUP_TIMEOUT (35*HZ)
-#define CCID_DRIVER_MINIMUM_TIMEOUT (3*HZ)
-#define READ_WRITE_BUFFER_SIZE 512
-#define POLL_LOOP_COUNT 1000
-
-/* how often to poll for fifo status change */
-#define POLL_PERIOD msecs_to_jiffies(10)
-
-static void reader_release(struct pcmcia_device *link);
-
-static int major;
-static struct class *cmx_class;
-
-#define BS_READABLE 0x01
-#define BS_WRITABLE 0x02
-
-struct reader_dev {
- struct pcmcia_device *p_dev;
- wait_queue_head_t devq;
- wait_queue_head_t poll_wait;
- wait_queue_head_t read_wait;
- wait_queue_head_t write_wait;
- unsigned long buffer_status;
- unsigned long timeout;
- unsigned char s_buf[READ_WRITE_BUFFER_SIZE];
- unsigned char r_buf[READ_WRITE_BUFFER_SIZE];
- struct timer_list poll_timer;
-};
-
-static struct pcmcia_device *dev_table[CM_MAX_DEV];
-
-#ifndef CM4040_DEBUG
-#define xoutb outb
-#define xinb inb
-#else
-static inline void xoutb(unsigned char val, unsigned short port)
-{
- pr_debug("outb(val=%.2x,port=%.4x)\n", val, port);
- outb(val, port);
-}
-
-static inline unsigned char xinb(unsigned short port)
-{
- unsigned char val;
-
- val = inb(port);
- pr_debug("%.2x=inb(%.4x)\n", val, port);
- return val;
-}
-#endif
-
-/* poll the device fifo status register. not to be confused with
- * the poll syscall. */
-static void cm4040_do_poll(struct timer_list *t)
-{
- struct reader_dev *dev = from_timer(dev, t, poll_timer);
- unsigned int obs = xinb(dev->p_dev->resource[0]->start
- + REG_OFFSET_BUFFER_STATUS);
-
- if ((obs & BSR_BULK_IN_FULL)) {
- set_bit(BS_READABLE, &dev->buffer_status);
- DEBUGP(4, dev, "waking up read_wait\n");
- wake_up_interruptible(&dev->read_wait);
- } else
- clear_bit(BS_READABLE, &dev->buffer_status);
-
- if (!(obs & BSR_BULK_OUT_FULL)) {
- set_bit(BS_WRITABLE, &dev->buffer_status);
- DEBUGP(4, dev, "waking up write_wait\n");
- wake_up_interruptible(&dev->write_wait);
- } else
- clear_bit(BS_WRITABLE, &dev->buffer_status);
-
- if (dev->buffer_status)
- wake_up_interruptible(&dev->poll_wait);
-
- mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
-}
-
-static void cm4040_stop_poll(struct reader_dev *dev)
-{
- del_timer_sync(&dev->poll_timer);
-}
-
-static int wait_for_bulk_out_ready(struct reader_dev *dev)
-{
- int i, rc;
- int iobase = dev->p_dev->resource[0]->start;
-
- for (i = 0; i < POLL_LOOP_COUNT; i++) {
- if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
- & BSR_BULK_OUT_FULL) == 0) {
- DEBUGP(4, dev, "BulkOut empty (i=%d)\n", i);
- return 1;
- }
- }
-
- DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n",
- dev->timeout);
- rc = wait_event_interruptible_timeout(dev->write_wait,
- test_and_clear_bit(BS_WRITABLE,
- &dev->buffer_status),
- dev->timeout);
-
- if (rc > 0)
- DEBUGP(4, dev, "woke up: BulkOut empty\n");
- else if (rc == 0)
- DEBUGP(4, dev, "woke up: BulkOut full, returning 0 :(\n");
- else if (rc < 0)
- DEBUGP(4, dev, "woke up: signal arrived\n");
-
- return rc;
-}
-
-/* Write to Sync Control Register */
-static int write_sync_reg(unsigned char val, struct reader_dev *dev)
-{
- int iobase = dev->p_dev->resource[0]->start;
- int rc;
-
- rc = wait_for_bulk_out_ready(dev);
- if (rc <= 0)
- return rc;
-
- xoutb(val, iobase + REG_OFFSET_SYNC_CONTROL);
- rc = wait_for_bulk_out_ready(dev);
- if (rc <= 0)
- return rc;
-
- return 1;
-}
-
-static int wait_for_bulk_in_ready(struct reader_dev *dev)
-{
- int i, rc;
- int iobase = dev->p_dev->resource[0]->start;
-
- for (i = 0; i < POLL_LOOP_COUNT; i++) {
- if ((xinb(iobase + REG_OFFSET_BUFFER_STATUS)
- & BSR_BULK_IN_FULL) == BSR_BULK_IN_FULL) {
- DEBUGP(3, dev, "BulkIn full (i=%d)\n", i);
- return 1;
- }
- }
-
- DEBUGP(4, dev, "wait_event_interruptible_timeout(timeout=%ld\n",
- dev->timeout);
- rc = wait_event_interruptible_timeout(dev->read_wait,
- test_and_clear_bit(BS_READABLE,
- &dev->buffer_status),
- dev->timeout);
- if (rc > 0)
- DEBUGP(4, dev, "woke up: BulkIn full\n");
- else if (rc == 0)
- DEBUGP(4, dev, "woke up: BulkIn not full, returning 0 :(\n");
- else if (rc < 0)
- DEBUGP(4, dev, "woke up: signal arrived\n");
-
- return rc;
-}
-
-static ssize_t cm4040_read(struct file *filp, char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct reader_dev *dev = filp->private_data;
- int iobase = dev->p_dev->resource[0]->start;
- size_t bytes_to_read;
- unsigned long i;
- size_t min_bytes_to_read;
- int rc;
-
- DEBUGP(2, dev, "-> cm4040_read(%s,%d)\n", current->comm, current->pid);
-
- if (count == 0)
- return 0;
-
- if (count < 10)
- return -EFAULT;
-
- if (filp->f_flags & O_NONBLOCK) {
- DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
- DEBUGP(2, dev, "<- cm4040_read (failure)\n");
- return -EAGAIN;
- }
-
- if (!pcmcia_dev_present(dev->p_dev))
- return -ENODEV;
-
- for (i = 0; i < 5; i++) {
- rc = wait_for_bulk_in_ready(dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
- DEBUGP(2, dev, "<- cm4040_read (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- return -EIO;
- }
- dev->r_buf[i] = xinb(iobase + REG_OFFSET_BULK_IN);
-#ifdef CM4040_DEBUG
- pr_debug("%lu:%2x ", i, dev->r_buf[i]);
- }
- pr_debug("\n");
-#else
- }
-#endif
-
- bytes_to_read = 5 + le32_to_cpu(*(__le32 *)&dev->r_buf[1]);
-
- DEBUGP(6, dev, "BytesToRead=%zu\n", bytes_to_read);
-
- min_bytes_to_read = min(count, bytes_to_read + 5);
- min_bytes_to_read = min_t(size_t, min_bytes_to_read, READ_WRITE_BUFFER_SIZE);
-
- DEBUGP(6, dev, "Min=%zu\n", min_bytes_to_read);
-
- for (i = 0; i < (min_bytes_to_read-5); i++) {
- rc = wait_for_bulk_in_ready(dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
- DEBUGP(2, dev, "<- cm4040_read (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- return -EIO;
- }
- dev->r_buf[i+5] = xinb(iobase + REG_OFFSET_BULK_IN);
-#ifdef CM4040_DEBUG
- pr_debug("%lu:%2x ", i, dev->r_buf[i]);
- }
- pr_debug("\n");
-#else
- }
-#endif
-
- *ppos = min_bytes_to_read;
- if (copy_to_user(buf, dev->r_buf, min_bytes_to_read))
- return -EFAULT;
-
- rc = wait_for_bulk_in_ready(dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "wait_for_bulk_in_ready rc=%.2x\n", rc);
- DEBUGP(2, dev, "<- cm4040_read (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- return -EIO;
- }
-
- rc = write_sync_reg(SCR_READER_TO_HOST_DONE, dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "write_sync_reg c=%.2x\n", rc);
- DEBUGP(2, dev, "<- cm4040_read (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- else
- return -EIO;
- }
-
- xinb(iobase + REG_OFFSET_BULK_IN);
-
- DEBUGP(2, dev, "<- cm4040_read (successfully)\n");
- return min_bytes_to_read;
-}
-
-static ssize_t cm4040_write(struct file *filp, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct reader_dev *dev = filp->private_data;
- int iobase = dev->p_dev->resource[0]->start;
- ssize_t rc;
- int i;
- unsigned int bytes_to_write;
-
- DEBUGP(2, dev, "-> cm4040_write(%s,%d)\n", current->comm, current->pid);
-
- if (count == 0) {
- DEBUGP(2, dev, "<- cm4040_write empty read (successfully)\n");
- return 0;
- }
-
- if ((count < 5) || (count > READ_WRITE_BUFFER_SIZE)) {
- DEBUGP(2, dev, "<- cm4040_write buffersize=%zd < 5\n", count);
- return -EIO;
- }
-
- if (filp->f_flags & O_NONBLOCK) {
- DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
- DEBUGP(4, dev, "<- cm4040_write (failure)\n");
- return -EAGAIN;
- }
-
- if (!pcmcia_dev_present(dev->p_dev))
- return -ENODEV;
-
- bytes_to_write = count;
- if (copy_from_user(dev->s_buf, buf, bytes_to_write))
- return -EFAULT;
-
- switch (dev->s_buf[0]) {
- case CMD_PC_TO_RDR_XFRBLOCK:
- case CMD_PC_TO_RDR_SECURE:
- case CMD_PC_TO_RDR_TEST_SECURE:
- case CMD_PC_TO_RDR_OK_SECURE:
- dev->timeout = CCID_DRIVER_BULK_DEFAULT_TIMEOUT;
- break;
-
- case CMD_PC_TO_RDR_ICCPOWERON:
- dev->timeout = CCID_DRIVER_ASYNC_POWERUP_TIMEOUT;
- break;
-
- case CMD_PC_TO_RDR_GETSLOTSTATUS:
- case CMD_PC_TO_RDR_ICCPOWEROFF:
- case CMD_PC_TO_RDR_GETPARAMETERS:
- case CMD_PC_TO_RDR_RESETPARAMETERS:
- case CMD_PC_TO_RDR_SETPARAMETERS:
- case CMD_PC_TO_RDR_ESCAPE:
- case CMD_PC_TO_RDR_ICCCLOCK:
- default:
- dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT;
- break;
- }
-
- rc = write_sync_reg(SCR_HOST_TO_READER_START, dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
- DEBUGP(2, dev, "<- cm4040_write (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- else
- return -EIO;
- }
-
- DEBUGP(4, dev, "start \n");
-
- for (i = 0; i < bytes_to_write; i++) {
- rc = wait_for_bulk_out_ready(dev);
- if (rc <= 0) {
- DEBUGP(5, dev, "wait_for_bulk_out_ready rc=%.2zx\n",
- rc);
- DEBUGP(2, dev, "<- cm4040_write (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- else
- return -EIO;
- }
-
- xoutb(dev->s_buf[i],iobase + REG_OFFSET_BULK_OUT);
- }
- DEBUGP(4, dev, "end\n");
-
- rc = write_sync_reg(SCR_HOST_TO_READER_DONE, dev);
-
- if (rc <= 0) {
- DEBUGP(5, dev, "write_sync_reg c=%.2zx\n", rc);
- DEBUGP(2, dev, "<- cm4040_write (failed)\n");
- if (rc == -ERESTARTSYS)
- return rc;
- else
- return -EIO;
- }
-
- DEBUGP(2, dev, "<- cm4040_write (successfully)\n");
- return count;
-}
-
-static __poll_t cm4040_poll(struct file *filp, poll_table *wait)
-{
- struct reader_dev *dev = filp->private_data;
- __poll_t mask = 0;
-
- poll_wait(filp, &dev->poll_wait, wait);
-
- if (test_and_clear_bit(BS_READABLE, &dev->buffer_status))
- mask |= EPOLLIN | EPOLLRDNORM;
- if (test_and_clear_bit(BS_WRITABLE, &dev->buffer_status))
- mask |= EPOLLOUT | EPOLLWRNORM;
-
- DEBUGP(2, dev, "<- cm4040_poll(%u)\n", mask);
-
- return mask;
-}
-
-static int cm4040_open(struct inode *inode, struct file *filp)
-{
- struct reader_dev *dev;
- struct pcmcia_device *link;
- int minor = iminor(inode);
- int ret;
-
- if (minor >= CM_MAX_DEV)
- return -ENODEV;
-
- mutex_lock(&cm4040_mutex);
- link = dev_table[minor];
- if (link == NULL || !pcmcia_dev_present(link)) {
- ret = -ENODEV;
- goto out;
- }
-
- if (link->open) {
- ret = -EBUSY;
- goto out;
- }
-
- dev = link->priv;
- filp->private_data = dev;
-
- if (filp->f_flags & O_NONBLOCK) {
- DEBUGP(4, dev, "filep->f_flags O_NONBLOCK set\n");
- ret = -EAGAIN;
- goto out;
- }
-
- link->open = 1;
-
- mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);
-
- DEBUGP(2, dev, "<- cm4040_open (successfully)\n");
- ret = nonseekable_open(inode, filp);
-out:
- mutex_unlock(&cm4040_mutex);
- return ret;
-}
-
-static int cm4040_close(struct inode *inode, struct file *filp)
-{
- struct reader_dev *dev = filp->private_data;
- struct pcmcia_device *link;
- int minor = iminor(inode);
-
- DEBUGP(2, dev, "-> cm4040_close(maj/min=%d.%d)\n", imajor(inode),
- iminor(inode));
-
- if (minor >= CM_MAX_DEV)
- return -ENODEV;
-
- link = dev_table[minor];
- if (link == NULL)
- return -ENODEV;
-
- cm4040_stop_poll(dev);
-
- link->open = 0;
- wake_up(&dev->devq);
-
- DEBUGP(2, dev, "<- cm4040_close\n");
- return 0;
-}
-
-static void cm4040_reader_release(struct pcmcia_device *link)
-{
- struct reader_dev *dev = link->priv;
-
- DEBUGP(3, dev, "-> cm4040_reader_release\n");
- while (link->open) {
- DEBUGP(3, dev, MODULE_NAME ": delaying release "
- "until process has terminated\n");
- wait_event(dev->devq, (link->open == 0));
- }
- DEBUGP(3, dev, "<- cm4040_reader_release\n");
- return;
-}
-
-static int cm4040_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- return pcmcia_request_io(p_dev);
-}
-
-
-static int reader_config(struct pcmcia_device *link, int devno)
-{
- struct reader_dev *dev;
- int fail_rc;
-
- link->config_flags |= CONF_AUTO_SET_IO;
-
- if (pcmcia_loop_config(link, cm4040_config_check, NULL))
- goto cs_release;
-
- fail_rc = pcmcia_enable_device(link);
- if (fail_rc != 0) {
- dev_info(&link->dev, "pcmcia_enable_device failed 0x%x\n",
- fail_rc);
- goto cs_release;
- }
-
- dev = link->priv;
-
- DEBUGP(2, dev, "device " DEVICE_NAME "%d at %pR\n", devno,
- link->resource[0]);
- DEBUGP(2, dev, "<- reader_config (succ)\n");
-
- return 0;
-
-cs_release:
- reader_release(link);
- return -ENODEV;
-}
-
-static void reader_release(struct pcmcia_device *link)
-{
- cm4040_reader_release(link);
- pcmcia_disable_device(link);
-}
-
-static int reader_probe(struct pcmcia_device *link)
-{
- struct reader_dev *dev;
- int i, ret;
-
- for (i = 0; i < CM_MAX_DEV; i++) {
- if (dev_table[i] == NULL)
- break;
- }
-
- if (i == CM_MAX_DEV)
- return -ENODEV;
-
- dev = kzalloc(sizeof(struct reader_dev), GFP_KERNEL);
- if (dev == NULL)
- return -ENOMEM;
-
- dev->timeout = CCID_DRIVER_MINIMUM_TIMEOUT;
- dev->buffer_status = 0;
-
- link->priv = dev;
- dev->p_dev = link;
-
- dev_table[i] = link;
-
- init_waitqueue_head(&dev->devq);
- init_waitqueue_head(&dev->poll_wait);
- init_waitqueue_head(&dev->read_wait);
- init_waitqueue_head(&dev->write_wait);
- timer_setup(&dev->poll_timer, cm4040_do_poll, 0);
-
- ret = reader_config(link, i);
- if (ret) {
- dev_table[i] = NULL;
- kfree(dev);
- return ret;
- }
-
- device_create(cmx_class, NULL, MKDEV(major, i), NULL, "cmx%d", i);
-
- return 0;
-}
-
-static void reader_detach(struct pcmcia_device *link)
-{
- struct reader_dev *dev = link->priv;
- int devno;
-
- /* find device */
- for (devno = 0; devno < CM_MAX_DEV; devno++) {
- if (dev_table[devno] == link)
- break;
- }
- if (devno == CM_MAX_DEV)
- return;
-
- reader_release(link);
-
- dev_table[devno] = NULL;
- kfree(dev);
-
- device_destroy(cmx_class, MKDEV(major, devno));
-
- return;
-}
-
-static const struct file_operations reader_fops = {
- .owner = THIS_MODULE,
- .read = cm4040_read,
- .write = cm4040_write,
- .open = cm4040_open,
- .release = cm4040_close,
- .poll = cm4040_poll,
- .llseek = no_llseek,
-};
-
-static const struct pcmcia_device_id cm4040_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x0223, 0x0200),
- PCMCIA_DEVICE_PROD_ID12("OMNIKEY", "CardMan 4040",
- 0xE32CDD8C, 0x8F23318B),
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, cm4040_ids);
-
-static struct pcmcia_driver reader_driver = {
- .owner = THIS_MODULE,
- .name = "cm4040_cs",
- .probe = reader_probe,
- .remove = reader_detach,
- .id_table = cm4040_ids,
-};
-
-static int __init cm4040_init(void)
-{
- int rc;
-
- cmx_class = class_create("cardman_4040");
- if (IS_ERR(cmx_class))
- return PTR_ERR(cmx_class);
-
- major = register_chrdev(0, DEVICE_NAME, &reader_fops);
- if (major < 0) {
- printk(KERN_WARNING MODULE_NAME
- ": could not get major number\n");
- class_destroy(cmx_class);
- return major;
- }
-
- rc = pcmcia_register_driver(&reader_driver);
- if (rc < 0) {
- unregister_chrdev(major, DEVICE_NAME);
- class_destroy(cmx_class);
- return rc;
- }
-
- return 0;
-}
-
-static void __exit cm4040_exit(void)
-{
- pcmcia_unregister_driver(&reader_driver);
- unregister_chrdev(major, DEVICE_NAME);
- class_destroy(cmx_class);
-}
-
-module_init(cm4040_init);
-module_exit(cm4040_exit);
-MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/char/pcmcia/cm4040_cs.h b/drivers/char/pcmcia/cm4040_cs.h
deleted file mode 100644
index e2ffff995d51..000000000000
--- a/drivers/char/pcmcia/cm4040_cs.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _CM4040_H_
-#define _CM4040_H_
-
-#define CM_MAX_DEV 4
-
-#define DEVICE_NAME "cmx"
-#define MODULE_NAME "cm4040_cs"
-
-#define REG_OFFSET_BULK_OUT 0
-#define REG_OFFSET_BULK_IN 0
-#define REG_OFFSET_BUFFER_STATUS 1
-#define REG_OFFSET_SYNC_CONTROL 2
-
-#define BSR_BULK_IN_FULL 0x02
-#define BSR_BULK_OUT_FULL 0x01
-
-#define SCR_HOST_TO_READER_START 0x80
-#define SCR_ABORT 0x40
-#define SCR_EN_NOTIFY 0x20
-#define SCR_ACK_NOTIFY 0x10
-#define SCR_READER_TO_HOST_DONE 0x08
-#define SCR_HOST_TO_READER_DONE 0x04
-#define SCR_PULSE_INTERRUPT 0x02
-#define SCR_POWER_DOWN 0x01
-
-
-#define CMD_PC_TO_RDR_ICCPOWERON 0x62
-#define CMD_PC_TO_RDR_GETSLOTSTATUS 0x65
-#define CMD_PC_TO_RDR_ICCPOWEROFF 0x63
-#define CMD_PC_TO_RDR_SECURE 0x69
-#define CMD_PC_TO_RDR_GETPARAMETERS 0x6C
-#define CMD_PC_TO_RDR_RESETPARAMETERS 0x6D
-#define CMD_PC_TO_RDR_SETPARAMETERS 0x61
-#define CMD_PC_TO_RDR_XFRBLOCK 0x6F
-#define CMD_PC_TO_RDR_ESCAPE 0x6B
-#define CMD_PC_TO_RDR_ICCCLOCK 0x6E
-#define CMD_PC_TO_RDR_TEST_SECURE 0x74
-#define CMD_PC_TO_RDR_OK_SECURE 0x89
-
-
-#define CMD_RDR_TO_PC_SLOTSTATUS 0x81
-#define CMD_RDR_TO_PC_DATABLOCK 0x80
-#define CMD_RDR_TO_PC_PARAMETERS 0x82
-#define CMD_RDR_TO_PC_ESCAPE 0x83
-#define CMD_RDR_TO_PC_OK_SECURE 0x89
-
-#endif /* _CM4040_H_ */
diff --git a/drivers/char/pcmcia/scr24x_cs.c b/drivers/char/pcmcia/scr24x_cs.c
deleted file mode 100644
index 870781f5a08c..000000000000
--- a/drivers/char/pcmcia/scr24x_cs.c
+++ /dev/null
@@ -1,359 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * SCR24x PCMCIA Smart Card Reader Driver
- *
- * Copyright (C) 2005-2006 TL Sudheendran
- * Copyright (C) 2016 Lubomir Rintel
- *
- * Derived from "scr24x_v4.2.6_Release.tar.gz" driver by TL Sudheendran.
- */
-
-#include <linux/device.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/cdev.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-#define CCID_HEADER_SIZE 10
-#define CCID_LENGTH_OFFSET 1
-#define CCID_MAX_LEN 271
-
-#define SCR24X_DATA(n) (1 + n)
-#define SCR24X_CMD_STATUS 7
-#define CMD_START 0x40
-#define CMD_WRITE_BYTE 0x41
-#define CMD_READ_BYTE 0x42
-#define STATUS_BUSY 0x80
-
-struct scr24x_dev {
- struct device *dev;
- struct cdev c_dev;
- unsigned char buf[CCID_MAX_LEN];
- int devno;
- struct mutex lock;
- struct kref refcnt;
- u8 __iomem *regs;
-};
-
-#define SCR24X_DEVS 8
-static DECLARE_BITMAP(scr24x_minors, SCR24X_DEVS);
-
-static struct class *scr24x_class;
-static dev_t scr24x_devt;
-
-static void scr24x_delete(struct kref *kref)
-{
- struct scr24x_dev *dev = container_of(kref, struct scr24x_dev,
- refcnt);
-
- kfree(dev);
-}
-
-static int scr24x_wait_ready(struct scr24x_dev *dev)
-{
- u_char status;
- int timeout = 100;
-
- do {
- status = ioread8(dev->regs + SCR24X_CMD_STATUS);
- if (!(status & STATUS_BUSY))
- return 0;
-
- msleep(20);
- } while (--timeout);
-
- return -EIO;
-}
-
-static int scr24x_open(struct inode *inode, struct file *filp)
-{
- struct scr24x_dev *dev = container_of(inode->i_cdev,
- struct scr24x_dev, c_dev);
-
- kref_get(&dev->refcnt);
- filp->private_data = dev;
-
- return stream_open(inode, filp);
-}
-
-static int scr24x_release(struct inode *inode, struct file *filp)
-{
- struct scr24x_dev *dev = filp->private_data;
-
- /* We must not take the dev->lock here as scr24x_delete()
- * might be called to remove the dev structure altogether.
- * We don't need the lock anyway, since after the reference
- * acquired in probe() is released in remove() the chrdev
- * is already unregistered and noone can possibly acquire
- * a reference via open() anymore. */
- kref_put(&dev->refcnt, scr24x_delete);
- return 0;
-}
-
-static int read_chunk(struct scr24x_dev *dev, size_t offset, size_t limit)
-{
- size_t i, y;
- int ret;
-
- for (i = offset; i < limit; i += 5) {
- iowrite8(CMD_READ_BYTE, dev->regs + SCR24X_CMD_STATUS);
- ret = scr24x_wait_ready(dev);
- if (ret < 0)
- return ret;
-
- for (y = 0; y < 5 && i + y < limit; y++)
- dev->buf[i + y] = ioread8(dev->regs + SCR24X_DATA(y));
- }
-
- return 0;
-}
-
-static ssize_t scr24x_read(struct file *filp, char __user *buf, size_t count,
- loff_t *ppos)
-{
- struct scr24x_dev *dev = filp->private_data;
- int ret;
- int len;
-
- if (count < CCID_HEADER_SIZE)
- return -EINVAL;
-
- if (mutex_lock_interruptible(&dev->lock))
- return -ERESTARTSYS;
-
- if (!dev->dev) {
- ret = -ENODEV;
- goto out;
- }
-
- ret = scr24x_wait_ready(dev);
- if (ret < 0)
- goto out;
- len = CCID_HEADER_SIZE;
- ret = read_chunk(dev, 0, len);
- if (ret < 0)
- goto out;
-
- len += le32_to_cpu(*(__le32 *)(&dev->buf[CCID_LENGTH_OFFSET]));
- if (len > sizeof(dev->buf)) {
- ret = -EIO;
- goto out;
- }
- ret = read_chunk(dev, CCID_HEADER_SIZE, len);
- if (ret < 0)
- goto out;
-
- if (len < count)
- count = len;
-
- if (copy_to_user(buf, dev->buf, count)) {
- ret = -EFAULT;
- goto out;
- }
-
- ret = count;
-out:
- mutex_unlock(&dev->lock);
- return ret;
-}
-
-static ssize_t scr24x_write(struct file *filp, const char __user *buf,
- size_t count, loff_t *ppos)
-{
- struct scr24x_dev *dev = filp->private_data;
- size_t i, y;
- int ret;
-
- if (mutex_lock_interruptible(&dev->lock))
- return -ERESTARTSYS;
-
- if (!dev->dev) {
- ret = -ENODEV;
- goto out;
- }
-
- if (count > sizeof(dev->buf)) {
- ret = -EINVAL;
- goto out;
- }
-
- if (copy_from_user(dev->buf, buf, count)) {
- ret = -EFAULT;
- goto out;
- }
-
- ret = scr24x_wait_ready(dev);
- if (ret < 0)
- goto out;
-
- iowrite8(CMD_START, dev->regs + SCR24X_CMD_STATUS);
- ret = scr24x_wait_ready(dev);
- if (ret < 0)
- goto out;
-
- for (i = 0; i < count; i += 5) {
- for (y = 0; y < 5 && i + y < count; y++)
- iowrite8(dev->buf[i + y], dev->regs + SCR24X_DATA(y));
-
- iowrite8(CMD_WRITE_BYTE, dev->regs + SCR24X_CMD_STATUS);
- ret = scr24x_wait_ready(dev);
- if (ret < 0)
- goto out;
- }
-
- ret = count;
-out:
- mutex_unlock(&dev->lock);
- return ret;
-}
-
-static const struct file_operations scr24x_fops = {
- .owner = THIS_MODULE,
- .read = scr24x_read,
- .write = scr24x_write,
- .open = scr24x_open,
- .release = scr24x_release,
- .llseek = no_llseek,
-};
-
-static int scr24x_config_check(struct pcmcia_device *link, void *priv_data)
-{
- if (resource_size(link->resource[PCMCIA_IOPORT_0]) != 0x11)
- return -ENODEV;
- return pcmcia_request_io(link);
-}
-
-static int scr24x_probe(struct pcmcia_device *link)
-{
- struct scr24x_dev *dev;
- int ret;
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev)
- return -ENOMEM;
-
- dev->devno = find_first_zero_bit(scr24x_minors, SCR24X_DEVS);
- if (dev->devno >= SCR24X_DEVS) {
- ret = -EBUSY;
- goto err;
- }
-
- mutex_init(&dev->lock);
- kref_init(&dev->refcnt);
-
- link->priv = dev;
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-
- ret = pcmcia_loop_config(link, scr24x_config_check, NULL);
- if (ret < 0)
- goto err;
-
- dev->dev = &link->dev;
- dev->regs = devm_ioport_map(&link->dev,
- link->resource[PCMCIA_IOPORT_0]->start,
- resource_size(link->resource[PCMCIA_IOPORT_0]));
- if (!dev->regs) {
- ret = -EIO;
- goto err;
- }
-
- cdev_init(&dev->c_dev, &scr24x_fops);
- dev->c_dev.owner = THIS_MODULE;
- ret = cdev_add(&dev->c_dev, MKDEV(MAJOR(scr24x_devt), dev->devno), 1);
- if (ret < 0)
- goto err;
-
- ret = pcmcia_enable_device(link);
- if (ret < 0) {
- pcmcia_disable_device(link);
- goto err;
- }
-
- device_create(scr24x_class, NULL, MKDEV(MAJOR(scr24x_devt), dev->devno),
- NULL, "scr24x%d", dev->devno);
-
- dev_info(&link->dev, "SCR24x Chip Card Interface\n");
- return 0;
-
-err:
- if (dev->devno < SCR24X_DEVS)
- clear_bit(dev->devno, scr24x_minors);
- kfree (dev);
- return ret;
-}
-
-static void scr24x_remove(struct pcmcia_device *link)
-{
- struct scr24x_dev *dev = (struct scr24x_dev *)link->priv;
-
- device_destroy(scr24x_class, MKDEV(MAJOR(scr24x_devt), dev->devno));
- mutex_lock(&dev->lock);
- pcmcia_disable_device(link);
- cdev_del(&dev->c_dev);
- clear_bit(dev->devno, scr24x_minors);
- dev->dev = NULL;
- mutex_unlock(&dev->lock);
-
- kref_put(&dev->refcnt, scr24x_delete);
-}
-
-static const struct pcmcia_device_id scr24x_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("HP", "PC Card Smart Card Reader",
- 0x53cb94f9, 0xbfdf89a5),
- PCMCIA_DEVICE_PROD_ID1("SCR241 PCMCIA", 0x6271efa3),
- PCMCIA_DEVICE_PROD_ID1("SCR243 PCMCIA", 0x2054e8de),
- PCMCIA_DEVICE_PROD_ID1("SCR24x PCMCIA", 0x54a33665),
- PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, scr24x_ids);
-
-static struct pcmcia_driver scr24x_driver = {
- .owner = THIS_MODULE,
- .name = "scr24x_cs",
- .probe = scr24x_probe,
- .remove = scr24x_remove,
- .id_table = scr24x_ids,
-};
-
-static int __init scr24x_init(void)
-{
- int ret;
-
- scr24x_class = class_create("scr24x");
- if (IS_ERR(scr24x_class))
- return PTR_ERR(scr24x_class);
-
- ret = alloc_chrdev_region(&scr24x_devt, 0, SCR24X_DEVS, "scr24x");
- if (ret < 0) {
- class_destroy(scr24x_class);
- return ret;
- }
-
- ret = pcmcia_register_driver(&scr24x_driver);
- if (ret < 0) {
- unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
- class_destroy(scr24x_class);
- }
-
- return ret;
-}
-
-static void __exit scr24x_exit(void)
-{
- pcmcia_unregister_driver(&scr24x_driver);
- unregister_chrdev_region(scr24x_devt, SCR24X_DEVS);
- class_destroy(scr24x_class);
-}
-
-module_init(scr24x_init);
-module_exit(scr24x_exit);
-
-MODULE_AUTHOR("Lubomir Rintel");
-MODULE_DESCRIPTION("SCR24x PCMCIA Smart Card Reader Driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c
deleted file mode 100644
index 97c5bfb9d58a..000000000000
--- a/drivers/char/pcmcia/synclink_cs.c
+++ /dev/null
@@ -1,4290 +0,0 @@
-/*
- * linux/drivers/char/pcmcia/synclink_cs.c
- *
- * $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
- *
- * Device driver for Microgate SyncLink PC Card
- * multiprotocol serial adapter.
- *
- * written by Paul Fulghum for Microgate Corporation
- * paulkf@microgate.com
- *
- * Microgate and SyncLink are trademarks of Microgate Corporation
- *
- * This code is released under the GNU General Public License (GPL)
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
-#if defined(__i386__)
-# define BREAKPOINT() asm(" int $3");
-#else
-# define BREAKPOINT() { }
-#endif
-
-#define MAX_DEVICE_COUNT 4
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/timer.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial.h>
-#include <linux/major.h>
-#include <linux/string.h>
-#include <linux/fcntl.h>
-#include <linux/ptrace.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/seq_file.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/vmalloc.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/ioctl.h>
-#include <linux/synclink.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/dma.h>
-#include <linux/bitops.h>
-#include <asm/types.h>
-#include <linux/termios.h>
-#include <linux/workqueue.h>
-#include <linux/hdlc.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
-#define SYNCLINK_GENERIC_HDLC 1
-#else
-#define SYNCLINK_GENERIC_HDLC 0
-#endif
-
-#define GET_USER(error,value,addr) error = get_user(value,addr)
-#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
-#define PUT_USER(error,value,addr) error = put_user(value,addr)
-#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
-
-#include <linux/uaccess.h>
-
-static MGSL_PARAMS default_params = {
- MGSL_MODE_HDLC, /* unsigned long mode */
- 0, /* unsigned char loopback; */
- HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
- HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
- 0, /* unsigned long clock_speed; */
- 0xff, /* unsigned char addr_filter; */
- HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
- HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
- HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
- 9600, /* unsigned long data_rate; */
- 8, /* unsigned char data_bits; */
- 1, /* unsigned char stop_bits; */
- ASYNC_PARITY_NONE /* unsigned char parity; */
-};
-
-typedef struct {
- int count;
- unsigned char status;
- char data[1];
-} RXBUF;
-
-/* The queue of BH actions to be performed */
-
-#define BH_RECEIVE 1
-#define BH_TRANSMIT 2
-#define BH_STATUS 4
-
-#define IO_PIN_SHUTDOWN_LIMIT 100
-
-#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
-
-struct _input_signal_events {
- int ri_up;
- int ri_down;
- int dsr_up;
- int dsr_down;
- int dcd_up;
- int dcd_down;
- int cts_up;
- int cts_down;
-};
-
-
-/*
- * Device instance data structure
- */
-
-typedef struct _mgslpc_info {
- struct tty_port port;
- void *if_ptr; /* General purpose pointer (used by SPPP) */
- int magic;
- int line;
-
- struct mgsl_icount icount;
-
- int timeout;
- int x_char; /* xon/xoff character */
- unsigned char read_status_mask;
- unsigned char ignore_status_mask;
-
- unsigned char *tx_buf;
- int tx_put;
- int tx_get;
- int tx_count;
-
- /* circular list of fixed length rx buffers */
-
- unsigned char *rx_buf; /* memory allocated for all rx buffers */
- int rx_buf_total_size; /* size of memory allocated for rx buffers */
- int rx_put; /* index of next empty rx buffer */
- int rx_get; /* index of next full rx buffer */
- int rx_buf_size; /* size in bytes of single rx buffer */
- int rx_buf_count; /* total number of rx buffers */
- int rx_frame_count; /* number of full rx buffers */
-
- wait_queue_head_t status_event_wait_q;
- wait_queue_head_t event_wait_q;
- struct timer_list tx_timer; /* HDLC transmit timeout timer */
- struct _mgslpc_info *next_device; /* device list link */
-
- unsigned short imra_value;
- unsigned short imrb_value;
- unsigned char pim_value;
-
- spinlock_t lock;
- struct work_struct task; /* task structure for scheduling bh */
-
- u32 max_frame_size;
-
- u32 pending_bh;
-
- bool bh_running;
- bool bh_requested;
-
- int dcd_chkcount; /* check counts to prevent */
- int cts_chkcount; /* too many IRQs if a signal */
- int dsr_chkcount; /* is floating */
- int ri_chkcount;
-
- bool rx_enabled;
- bool rx_overflow;
-
- bool tx_enabled;
- bool tx_active;
- bool tx_aborting;
- u32 idle_mode;
-
- int if_mode; /* serial interface selection (RS-232, v.35 etc) */
-
- char device_name[25]; /* device instance name */
-
- unsigned int io_base; /* base I/O address of adapter */
- unsigned int irq_level;
-
- MGSL_PARAMS params; /* communications parameters */
-
- unsigned char serial_signals; /* current serial signal states */
-
- bool irq_occurred; /* for diagnostics use */
- char testing_irq;
- unsigned int init_error; /* startup error (DIAGS) */
-
- char *flag_buf;
- bool drop_rts_on_tx_done;
-
- struct _input_signal_events input_signal_events;
-
- /* PCMCIA support */
- struct pcmcia_device *p_dev;
- int stop;
-
- /* SPPP/Cisco HDLC device parts */
- int netcount;
- spinlock_t netlock;
-
-#if SYNCLINK_GENERIC_HDLC
- struct net_device *netdev;
-#endif
-
-} MGSLPC_INFO;
-
-#define MGSLPC_MAGIC 0x5402
-
-/*
- * The size of the serial xmit buffer is 1 page, or 4096 bytes
- */
-#define TXBUFSIZE 4096
-
-
-#define CHA 0x00 /* channel A offset */
-#define CHB 0x40 /* channel B offset */
-
-/*
- * FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
- */
-#undef PVR
-
-#define RXFIFO 0
-#define TXFIFO 0
-#define STAR 0x20
-#define CMDR 0x20
-#define RSTA 0x21
-#define PRE 0x21
-#define MODE 0x22
-#define TIMR 0x23
-#define XAD1 0x24
-#define XAD2 0x25
-#define RAH1 0x26
-#define RAH2 0x27
-#define DAFO 0x27
-#define RAL1 0x28
-#define RFC 0x28
-#define RHCR 0x29
-#define RAL2 0x29
-#define RBCL 0x2a
-#define XBCL 0x2a
-#define RBCH 0x2b
-#define XBCH 0x2b
-#define CCR0 0x2c
-#define CCR1 0x2d
-#define CCR2 0x2e
-#define CCR3 0x2f
-#define VSTR 0x34
-#define BGR 0x34
-#define RLCR 0x35
-#define AML 0x36
-#define AMH 0x37
-#define GIS 0x38
-#define IVA 0x38
-#define IPC 0x39
-#define ISR 0x3a
-#define IMR 0x3a
-#define PVR 0x3c
-#define PIS 0x3d
-#define PIM 0x3d
-#define PCR 0x3e
-#define CCR4 0x3f
-
-// IMR/ISR
-
-#define IRQ_BREAK_ON BIT15 // rx break detected
-#define IRQ_DATAOVERRUN BIT14 // receive data overflow
-#define IRQ_ALLSENT BIT13 // all sent
-#define IRQ_UNDERRUN BIT12 // transmit data underrun
-#define IRQ_TIMER BIT11 // timer interrupt
-#define IRQ_CTS BIT10 // CTS status change
-#define IRQ_TXREPEAT BIT9 // tx message repeat
-#define IRQ_TXFIFO BIT8 // transmit pool ready
-#define IRQ_RXEOM BIT7 // receive message end
-#define IRQ_EXITHUNT BIT6 // receive frame start
-#define IRQ_RXTIME BIT6 // rx char timeout
-#define IRQ_DCD BIT2 // carrier detect status change
-#define IRQ_OVERRUN BIT1 // receive frame overflow
-#define IRQ_RXFIFO BIT0 // receive pool full
-
-// STAR
-
-#define XFW BIT6 // transmit FIFO write enable
-#define CEC BIT2 // command executing
-#define CTS BIT1 // CTS state
-
-#define PVR_DTR BIT0
-#define PVR_DSR BIT1
-#define PVR_RI BIT2
-#define PVR_AUTOCTS BIT3
-#define PVR_RS232 0x20 /* 0010b */
-#define PVR_V35 0xe0 /* 1110b */
-#define PVR_RS422 0x40 /* 0100b */
-
-/* Register access functions */
-
-#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
-#define read_reg(info, reg) inb((info)->io_base + (reg))
-
-#define read_reg16(info, reg) inw((info)->io_base + (reg))
-#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
-
-#define set_reg_bits(info, reg, mask) \
- write_reg(info, (reg), \
- (unsigned char) (read_reg(info, (reg)) | (mask)))
-#define clear_reg_bits(info, reg, mask) \
- write_reg(info, (reg), \
- (unsigned char) (read_reg(info, (reg)) & ~(mask)))
-/*
- * interrupt enable/disable routines
- */
-static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
-{
- if (channel == CHA) {
- info->imra_value |= mask;
- write_reg16(info, CHA + IMR, info->imra_value);
- } else {
- info->imrb_value |= mask;
- write_reg16(info, CHB + IMR, info->imrb_value);
- }
-}
-static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
-{
- if (channel == CHA) {
- info->imra_value &= ~mask;
- write_reg16(info, CHA + IMR, info->imra_value);
- } else {
- info->imrb_value &= ~mask;
- write_reg16(info, CHB + IMR, info->imrb_value);
- }
-}
-
-#define port_irq_disable(info, mask) \
- { info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
-
-#define port_irq_enable(info, mask) \
- { info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
-
-static void rx_start(MGSLPC_INFO *info);
-static void rx_stop(MGSLPC_INFO *info);
-
-static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
-static void tx_stop(MGSLPC_INFO *info);
-static void tx_set_idle(MGSLPC_INFO *info);
-
-static void get_signals(MGSLPC_INFO *info);
-static void set_signals(MGSLPC_INFO *info);
-
-static void reset_device(MGSLPC_INFO *info);
-
-static void hdlc_mode(MGSLPC_INFO *info);
-static void async_mode(MGSLPC_INFO *info);
-
-static void tx_timeout(struct timer_list *t);
-
-static bool carrier_raised(struct tty_port *port);
-static void dtr_rts(struct tty_port *port, bool active);
-
-#if SYNCLINK_GENERIC_HDLC
-#define dev_to_port(D) (dev_to_hdlc(D)->priv)
-static void hdlcdev_tx_done(MGSLPC_INFO *info);
-static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
-static int hdlcdev_init(MGSLPC_INFO *info);
-static void hdlcdev_exit(MGSLPC_INFO *info);
-#endif
-
-static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
-
-static bool register_test(MGSLPC_INFO *info);
-static bool irq_test(MGSLPC_INFO *info);
-static int adapter_test(MGSLPC_INFO *info);
-
-static int claim_resources(MGSLPC_INFO *info);
-static void release_resources(MGSLPC_INFO *info);
-static int mgslpc_add_device(MGSLPC_INFO *info);
-static void mgslpc_remove_device(MGSLPC_INFO *info);
-
-static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
-static void rx_reset_buffers(MGSLPC_INFO *info);
-static int rx_alloc_buffers(MGSLPC_INFO *info);
-static void rx_free_buffers(MGSLPC_INFO *info);
-
-static irqreturn_t mgslpc_isr(int irq, void *dev_id);
-
-/*
- * Bottom half interrupt handlers
- */
-static void bh_handler(struct work_struct *work);
-static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
-static void bh_status(MGSLPC_INFO *info);
-
-/*
- * ioctl handlers
- */
-static int tiocmget(struct tty_struct *tty);
-static int tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear);
-static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
-static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
-static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
-static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
-static int set_txidle(MGSLPC_INFO *info, int idle_mode);
-static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
-static int tx_abort(MGSLPC_INFO *info);
-static int set_rxenable(MGSLPC_INFO *info, int enable);
-static int wait_events(MGSLPC_INFO *info, int __user *mask);
-
-static MGSLPC_INFO *mgslpc_device_list = NULL;
-static int mgslpc_device_count = 0;
-
-/*
- * Set this param to non-zero to load eax with the
- * .text section address and breakpoint on module load.
- * This is useful for use with gdb and add-symbol-file command.
- */
-static bool break_on_load;
-
-/*
- * Driver major number, defaults to zero to get auto
- * assigned major number. May be forced as module parameter.
- */
-static int ttymajor=0;
-
-static int debug_level = 0;
-static int maxframe[MAX_DEVICE_COUNT] = {0,};
-
-module_param(break_on_load, bool, 0);
-module_param(ttymajor, int, 0);
-module_param(debug_level, int, 0);
-module_param_array(maxframe, int, NULL, 0);
-
-MODULE_LICENSE("GPL");
-
-static char *driver_name = "SyncLink PC Card driver";
-static char *driver_version = "$Revision: 4.34 $";
-
-static struct tty_driver *serial_driver;
-
-/* number of characters left in xmit buffer before we ask for more */
-#define WAKEUP_CHARS 256
-
-static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
-static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
-
-/* PCMCIA prototypes */
-
-static int mgslpc_config(struct pcmcia_device *link);
-static void mgslpc_release(u_long arg);
-static void mgslpc_detach(struct pcmcia_device *p_dev);
-
-/*
- * 1st function defined in .text section. Calling this function in
- * init_module() followed by a breakpoint allows a remote debugger
- * (gdb) to get the .text address for the add-symbol-file command.
- * This allows remote debugging of dynamically loadable modules.
- */
-static void* mgslpc_get_text_ptr(void)
-{
- return mgslpc_get_text_ptr;
-}
-
-/*
- * line discipline callback wrappers
- *
- * The wrappers maintain line discipline references
- * while calling into the line discipline.
- *
- * ldisc_receive_buf - pass receive data to line discipline
- */
-
-static void ldisc_receive_buf(struct tty_struct *tty,
- const __u8 *data, char *flags, int count)
-{
- struct tty_ldisc *ld;
- if (!tty)
- return;
- ld = tty_ldisc_ref(tty);
- if (ld) {
- if (ld->ops->receive_buf)
- ld->ops->receive_buf(tty, data, flags, count);
- tty_ldisc_deref(ld);
- }
-}
-
-static const struct tty_port_operations mgslpc_port_ops = {
- .carrier_raised = carrier_raised,
- .dtr_rts = dtr_rts
-};
-
-static int mgslpc_probe(struct pcmcia_device *link)
-{
- MGSLPC_INFO *info;
- int ret;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("mgslpc_attach\n");
-
- info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
- if (!info) {
- printk("Error can't allocate device instance data\n");
- return -ENOMEM;
- }
-
- info->magic = MGSLPC_MAGIC;
- tty_port_init(&info->port);
- info->port.ops = &mgslpc_port_ops;
- INIT_WORK(&info->task, bh_handler);
- info->max_frame_size = 4096;
- init_waitqueue_head(&info->status_event_wait_q);
- init_waitqueue_head(&info->event_wait_q);
- spin_lock_init(&info->lock);
- spin_lock_init(&info->netlock);
- memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
- info->idle_mode = HDLC_TXIDLE_FLAGS;
- info->imra_value = 0xffff;
- info->imrb_value = 0xffff;
- info->pim_value = 0xff;
-
- info->p_dev = link;
- link->priv = info;
-
- /* Initialize the struct pcmcia_device structure */
-
- ret = mgslpc_config(link);
- if (ret != 0)
- goto failed;
-
- ret = mgslpc_add_device(info);
- if (ret != 0)
- goto failed_release;
-
- return 0;
-
-failed_release:
- mgslpc_release((u_long)link);
-failed:
- tty_port_destroy(&info->port);
- kfree(info);
- return ret;
-}
-
-/* Card has been inserted.
- */
-
-static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
-{
- return pcmcia_request_io(p_dev);
-}
-
-static int mgslpc_config(struct pcmcia_device *link)
-{
- MGSLPC_INFO *info = link->priv;
- int ret;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("mgslpc_config(0x%p)\n", link);
-
- link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
-
- ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
- if (ret != 0)
- goto failed;
-
- link->config_index = 8;
- link->config_regs = PRESENT_OPTION;
-
- ret = pcmcia_request_irq(link, mgslpc_isr);
- if (ret)
- goto failed;
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- info->io_base = link->resource[0]->start;
- info->irq_level = link->irq;
- return 0;
-
-failed:
- mgslpc_release((u_long)link);
- return -ENODEV;
-}
-
-/* Card has been removed.
- * Unregister device and release PCMCIA configuration.
- * If device is open, postpone until it is closed.
- */
-static void mgslpc_release(u_long arg)
-{
- struct pcmcia_device *link = (struct pcmcia_device *)arg;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("mgslpc_release(0x%p)\n", link);
-
- pcmcia_disable_device(link);
-}
-
-static void mgslpc_detach(struct pcmcia_device *link)
-{
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("mgslpc_detach(0x%p)\n", link);
-
- ((MGSLPC_INFO *)link->priv)->stop = 1;
- mgslpc_release((u_long)link);
-
- mgslpc_remove_device((MGSLPC_INFO *)link->priv);
-}
-
-static int mgslpc_suspend(struct pcmcia_device *link)
-{
- MGSLPC_INFO *info = link->priv;
-
- info->stop = 1;
-
- return 0;
-}
-
-static int mgslpc_resume(struct pcmcia_device *link)
-{
- MGSLPC_INFO *info = link->priv;
-
- info->stop = 0;
-
- return 0;
-}
-
-
-static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
- char *name, const char *routine)
-{
-#ifdef MGSLPC_PARANOIA_CHECK
- static const char *badmagic =
- "Warning: bad magic number for mgsl struct (%s) in %s\n";
- static const char *badinfo =
- "Warning: null mgslpc_info for (%s) in %s\n";
-
- if (!info) {
- printk(badinfo, name, routine);
- return true;
- }
- if (info->magic != MGSLPC_MAGIC) {
- printk(badmagic, name, routine);
- return true;
- }
-#else
- if (!info)
- return true;
-#endif
- return false;
-}
-
-
-#define CMD_RXFIFO BIT7 // release current rx FIFO
-#define CMD_RXRESET BIT6 // receiver reset
-#define CMD_RXFIFO_READ BIT5
-#define CMD_START_TIMER BIT4
-#define CMD_TXFIFO BIT3 // release current tx FIFO
-#define CMD_TXEOM BIT1 // transmit end message
-#define CMD_TXRESET BIT0 // transmit reset
-
-static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
-{
- int i = 0;
- /* wait for command completion */
- while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
- udelay(1);
- if (i++ == 1000)
- return false;
- }
- return true;
-}
-
-static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
-{
- wait_command_complete(info, channel);
- write_reg(info, (unsigned char) (channel + CMDR), cmd);
-}
-
-static void tx_pause(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
- return;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("tx_pause(%s)\n", info->device_name);
-
- spin_lock_irqsave(&info->lock, flags);
- if (info->tx_enabled)
- tx_stop(info);
- spin_unlock_irqrestore(&info->lock, flags);
-}
-
-static void tx_release(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
- return;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("tx_release(%s)\n", info->device_name);
-
- spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_enabled)
- tx_start(info, tty);
- spin_unlock_irqrestore(&info->lock, flags);
-}
-
-/* Return next bottom half action to perform.
- * or 0 if nothing to do.
- */
-static int bh_action(MGSLPC_INFO *info)
-{
- unsigned long flags;
- int rc = 0;
-
- spin_lock_irqsave(&info->lock, flags);
-
- if (info->pending_bh & BH_RECEIVE) {
- info->pending_bh &= ~BH_RECEIVE;
- rc = BH_RECEIVE;
- } else if (info->pending_bh & BH_TRANSMIT) {
- info->pending_bh &= ~BH_TRANSMIT;
- rc = BH_TRANSMIT;
- } else if (info->pending_bh & BH_STATUS) {
- info->pending_bh &= ~BH_STATUS;
- rc = BH_STATUS;
- }
-
- if (!rc) {
- /* Mark BH routine as complete */
- info->bh_running = false;
- info->bh_requested = false;
- }
-
- spin_unlock_irqrestore(&info->lock, flags);
-
- return rc;
-}
-
-static void bh_handler(struct work_struct *work)
-{
- MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
- struct tty_struct *tty;
- int action;
-
- if (debug_level >= DEBUG_LEVEL_BH)
- printk("%s(%d):bh_handler(%s) entry\n",
- __FILE__,__LINE__,info->device_name);
-
- info->bh_running = true;
- tty = tty_port_tty_get(&info->port);
-
- while((action = bh_action(info)) != 0) {
-
- /* Process work item */
- if (debug_level >= DEBUG_LEVEL_BH)
- printk("%s(%d):bh_handler() work item action=%d\n",
- __FILE__,__LINE__,action);
-
- switch (action) {
-
- case BH_RECEIVE:
- while(rx_get_frame(info, tty));
- break;
- case BH_TRANSMIT:
- bh_transmit(info, tty);
- break;
- case BH_STATUS:
- bh_status(info);
- break;
- default:
- /* unknown work item ID */
- printk("Unknown work item ID=%08X!\n", action);
- break;
- }
- }
-
- tty_kref_put(tty);
- if (debug_level >= DEBUG_LEVEL_BH)
- printk("%s(%d):bh_handler(%s) exit\n",
- __FILE__,__LINE__,info->device_name);
-}
-
-static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- if (debug_level >= DEBUG_LEVEL_BH)
- printk("bh_transmit() entry on %s\n", info->device_name);
-
- if (tty)
- tty_wakeup(tty);
-}
-
-static void bh_status(MGSLPC_INFO *info)
-{
- info->ri_chkcount = 0;
- info->dsr_chkcount = 0;
- info->dcd_chkcount = 0;
- info->cts_chkcount = 0;
-}
-
-/* eom: non-zero = end of frame */
-static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
-{
- unsigned char data[2];
- unsigned char fifo_count, read_count, i;
- RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
-
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom);
-
- if (!info->rx_enabled)
- return;
-
- if (info->rx_frame_count >= info->rx_buf_count) {
- /* no more free buffers */
- issue_command(info, CHA, CMD_RXRESET);
- info->pending_bh |= BH_RECEIVE;
- info->rx_overflow = true;
- info->icount.buf_overrun++;
- return;
- }
-
- if (eom) {
- /* end of frame, get FIFO count from RBCL register */
- fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
- if (fifo_count == 0)
- fifo_count = 32;
- } else
- fifo_count = 32;
-
- do {
- if (fifo_count == 1) {
- read_count = 1;
- data[0] = read_reg(info, CHA + RXFIFO);
- } else {
- read_count = 2;
- *((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
- }
- fifo_count -= read_count;
- if (!fifo_count && eom)
- buf->status = data[--read_count];
-
- for (i = 0; i < read_count; i++) {
- if (buf->count >= info->max_frame_size) {
- /* frame too large, reset receiver and reset current buffer */
- issue_command(info, CHA, CMD_RXRESET);
- buf->count = 0;
- return;
- }
- *(buf->data + buf->count) = data[i];
- buf->count++;
- }
- } while (fifo_count);
-
- if (eom) {
- info->pending_bh |= BH_RECEIVE;
- info->rx_frame_count++;
- info->rx_put++;
- if (info->rx_put >= info->rx_buf_count)
- info->rx_put = 0;
- }
- issue_command(info, CHA, CMD_RXFIFO);
-}
-
-static void rx_ready_async(MGSLPC_INFO *info, int tcd)
-{
- struct tty_port *port = &info->port;
- unsigned char data, status, flag;
- int fifo_count;
- int work = 0;
- struct mgsl_icount *icount = &info->icount;
-
- if (tcd) {
- /* early termination, get FIFO count from RBCL register */
- fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
-
- /* Zero fifo count could mean 0 or 32 bytes available.
- * If BIT5 of STAR is set then at least 1 byte is available.
- */
- if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
- fifo_count = 32;
- } else
- fifo_count = 32;
-
- tty_buffer_request_room(port, fifo_count);
- /* Flush received async data to receive data buffer. */
- while (fifo_count) {
- data = read_reg(info, CHA + RXFIFO);
- status = read_reg(info, CHA + RXFIFO);
- fifo_count -= 2;
-
- icount->rx++;
- flag = TTY_NORMAL;
-
- // if no frameing/crc error then save data
- // BIT7:parity error
- // BIT6:framing error
-
- if (status & (BIT7 | BIT6)) {
- if (status & BIT7)
- icount->parity++;
- else
- icount->frame++;
-
- /* discard char if tty control flags say so */
- if (status & info->ignore_status_mask)
- continue;
-
- status &= info->read_status_mask;
-
- if (status & BIT7)
- flag = TTY_PARITY;
- else if (status & BIT6)
- flag = TTY_FRAME;
- }
- work += tty_insert_flip_char(port, data, flag);
- }
- issue_command(info, CHA, CMD_RXFIFO);
-
- if (debug_level >= DEBUG_LEVEL_ISR) {
- printk("%s(%d):rx_ready_async",
- __FILE__,__LINE__);
- printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
- __FILE__,__LINE__,icount->rx,icount->brk,
- icount->parity,icount->frame,icount->overrun);
- }
-
- if (work)
- tty_flip_buffer_push(port);
-}
-
-
-static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- if (!info->tx_active)
- return;
-
- info->tx_active = false;
- info->tx_aborting = false;
-
- if (info->params.mode == MGSL_MODE_ASYNC)
- return;
-
- info->tx_count = info->tx_put = info->tx_get = 0;
- del_timer(&info->tx_timer);
-
- if (info->drop_rts_on_tx_done) {
- get_signals(info);
- if (info->serial_signals & SerialSignal_RTS) {
- info->serial_signals &= ~SerialSignal_RTS;
- set_signals(info);
- }
- info->drop_rts_on_tx_done = false;
- }
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_tx_done(info);
- else
-#endif
- {
- if (tty && (tty->flow.stopped || tty->hw_stopped)) {
- tx_stop(info);
- return;
- }
- info->pending_bh |= BH_TRANSMIT;
- }
-}
-
-static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- unsigned char fifo_count = 32;
- int c;
-
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name);
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- if (!info->tx_active)
- return;
- } else {
- if (tty && (tty->flow.stopped || tty->hw_stopped)) {
- tx_stop(info);
- return;
- }
- if (!info->tx_count)
- info->tx_active = false;
- }
-
- if (!info->tx_count)
- return;
-
- while (info->tx_count && fifo_count) {
- c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
-
- if (c == 1) {
- write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
- } else {
- write_reg16(info, CHA + TXFIFO,
- *((unsigned short*)(info->tx_buf + info->tx_get)));
- }
- info->tx_count -= c;
- info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
- fifo_count -= c;
- }
-
- if (info->params.mode == MGSL_MODE_ASYNC) {
- if (info->tx_count < WAKEUP_CHARS)
- info->pending_bh |= BH_TRANSMIT;
- issue_command(info, CHA, CMD_TXFIFO);
- } else {
- if (info->tx_count)
- issue_command(info, CHA, CMD_TXFIFO);
- else
- issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
- }
-}
-
-static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- get_signals(info);
- if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
- irq_disable(info, CHB, IRQ_CTS);
- info->icount.cts++;
- if (info->serial_signals & SerialSignal_CTS)
- info->input_signal_events.cts_up++;
- else
- info->input_signal_events.cts_down++;
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
-
- if (tty && tty_port_cts_enabled(&info->port)) {
- if (tty->hw_stopped) {
- if (info->serial_signals & SerialSignal_CTS) {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("CTS tx start...");
- tty->hw_stopped = false;
- tx_start(info, tty);
- info->pending_bh |= BH_TRANSMIT;
- return;
- }
- } else {
- if (!(info->serial_signals & SerialSignal_CTS)) {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("CTS tx stop...");
- tty->hw_stopped = true;
- tx_stop(info);
- }
- }
- }
- info->pending_bh |= BH_STATUS;
-}
-
-static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- get_signals(info);
- if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
- irq_disable(info, CHB, IRQ_DCD);
- info->icount.dcd++;
- if (info->serial_signals & SerialSignal_DCD) {
- info->input_signal_events.dcd_up++;
- }
- else
- info->input_signal_events.dcd_down++;
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount) {
- if (info->serial_signals & SerialSignal_DCD)
- netif_carrier_on(info->netdev);
- else
- netif_carrier_off(info->netdev);
- }
-#endif
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
-
- if (tty_port_check_carrier(&info->port)) {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s CD now %s...", info->device_name,
- (info->serial_signals & SerialSignal_DCD) ? "on" : "off");
- if (info->serial_signals & SerialSignal_DCD)
- wake_up_interruptible(&info->port.open_wait);
- else {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("doing serial hangup...");
- if (tty)
- tty_hangup(tty);
- }
- }
- info->pending_bh |= BH_STATUS;
-}
-
-static void dsr_change(MGSLPC_INFO *info)
-{
- get_signals(info);
- if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
- port_irq_disable(info, PVR_DSR);
- info->icount.dsr++;
- if (info->serial_signals & SerialSignal_DSR)
- info->input_signal_events.dsr_up++;
- else
- info->input_signal_events.dsr_down++;
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
- info->pending_bh |= BH_STATUS;
-}
-
-static void ri_change(MGSLPC_INFO *info)
-{
- get_signals(info);
- if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
- port_irq_disable(info, PVR_RI);
- info->icount.rng++;
- if (info->serial_signals & SerialSignal_RI)
- info->input_signal_events.ri_up++;
- else
- info->input_signal_events.ri_down++;
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
- info->pending_bh |= BH_STATUS;
-}
-
-/* Interrupt service routine entry point.
- *
- * Arguments:
- *
- * irq interrupt number that caused interrupt
- * dev_id device ID supplied during interrupt registration
- */
-static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
-{
- MGSLPC_INFO *info = dev_id;
- struct tty_struct *tty;
- unsigned short isr;
- unsigned char gis, pis;
- int count=0;
-
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("mgslpc_isr(%d) entry.\n", info->irq_level);
-
- if (!(info->p_dev->_locked))
- return IRQ_HANDLED;
-
- tty = tty_port_tty_get(&info->port);
-
- spin_lock(&info->lock);
-
- while ((gis = read_reg(info, CHA + GIS))) {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
-
- if ((gis & 0x70) || count > 1000) {
- printk("synclink_cs:hardware failed or ejected\n");
- break;
- }
- count++;
-
- if (gis & (BIT1 | BIT0)) {
- isr = read_reg16(info, CHB + ISR);
- if (isr & IRQ_DCD)
- dcd_change(info, tty);
- if (isr & IRQ_CTS)
- cts_change(info, tty);
- }
- if (gis & (BIT3 | BIT2))
- {
- isr = read_reg16(info, CHA + ISR);
- if (isr & IRQ_TIMER) {
- info->irq_occurred = true;
- irq_disable(info, CHA, IRQ_TIMER);
- }
-
- /* receive IRQs */
- if (isr & IRQ_EXITHUNT) {
- info->icount.exithunt++;
- wake_up_interruptible(&info->event_wait_q);
- }
- if (isr & IRQ_BREAK_ON) {
- info->icount.brk++;
- if (info->port.flags & ASYNC_SAK)
- do_SAK(tty);
- }
- if (isr & IRQ_RXTIME) {
- issue_command(info, CHA, CMD_RXFIFO_READ);
- }
- if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) {
- if (info->params.mode == MGSL_MODE_HDLC)
- rx_ready_hdlc(info, isr & IRQ_RXEOM);
- else
- rx_ready_async(info, isr & IRQ_RXEOM);
- }
-
- /* transmit IRQs */
- if (isr & IRQ_UNDERRUN) {
- if (info->tx_aborting)
- info->icount.txabort++;
- else
- info->icount.txunder++;
- tx_done(info, tty);
- }
- else if (isr & IRQ_ALLSENT) {
- info->icount.txok++;
- tx_done(info, tty);
- }
- else if (isr & IRQ_TXFIFO)
- tx_ready(info, tty);
- }
- if (gis & BIT7) {
- pis = read_reg(info, CHA + PIS);
- if (pis & BIT1)
- dsr_change(info);
- if (pis & BIT2)
- ri_change(info);
- }
- }
-
- /* Request bottom half processing if there's something
- * for it to do and the bh is not already running
- */
-
- if (info->pending_bh && !info->bh_running && !info->bh_requested) {
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):%s queueing bh task.\n",
- __FILE__,__LINE__,info->device_name);
- schedule_work(&info->task);
- info->bh_requested = true;
- }
-
- spin_unlock(&info->lock);
- tty_kref_put(tty);
-
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):mgslpc_isr(%d)exit.\n",
- __FILE__, __LINE__, info->irq_level);
-
- return IRQ_HANDLED;
-}
-
-/* Initialize and start device.
- */
-static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
-{
- int retval = 0;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name);
-
- if (tty_port_initialized(&info->port))
- return 0;
-
- if (!info->tx_buf) {
- /* allocate a page of memory for a transmit buffer */
- info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
- if (!info->tx_buf) {
- printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
- __FILE__, __LINE__, info->device_name);
- return -ENOMEM;
- }
- }
-
- info->pending_bh = 0;
-
- memset(&info->icount, 0, sizeof(info->icount));
-
- timer_setup(&info->tx_timer, tx_timeout, 0);
-
- /* Allocate and claim adapter resources */
- retval = claim_resources(info);
-
- /* perform existence check and diagnostics */
- if (!retval)
- retval = adapter_test(info);
-
- if (retval) {
- if (capable(CAP_SYS_ADMIN) && tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
- release_resources(info);
- return retval;
- }
-
- /* program hardware for current parameters */
- mgslpc_change_params(info, tty);
-
- if (tty)
- clear_bit(TTY_IO_ERROR, &tty->flags);
-
- tty_port_set_initialized(&info->port, true);
-
- return 0;
-}
-
-/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
- */
-static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
-{
- unsigned long flags;
-
- if (!tty_port_initialized(&info->port))
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_shutdown(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- /* clear status wait queue because status changes */
- /* can't happen after shutting down the hardware */
- wake_up_interruptible(&info->status_event_wait_q);
- wake_up_interruptible(&info->event_wait_q);
-
- del_timer_sync(&info->tx_timer);
-
- if (info->tx_buf) {
- free_page((unsigned long) info->tx_buf);
- info->tx_buf = NULL;
- }
-
- spin_lock_irqsave(&info->lock, flags);
-
- rx_stop(info);
- tx_stop(info);
-
- /* TODO:disable interrupts instead of reset to preserve signal states */
- reset_device(info);
-
- if (!tty || C_HUPCL(tty)) {
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
- }
-
- spin_unlock_irqrestore(&info->lock, flags);
-
- release_resources(info);
-
- if (tty)
- set_bit(TTY_IO_ERROR, &tty->flags);
-
- tty_port_set_initialized(&info->port, false);
-}
-
-static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
-
- rx_stop(info);
- tx_stop(info);
- info->tx_count = info->tx_put = info->tx_get = 0;
-
- if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
- hdlc_mode(info);
- else
- async_mode(info);
-
- set_signals(info);
-
- info->dcd_chkcount = 0;
- info->cts_chkcount = 0;
- info->ri_chkcount = 0;
- info->dsr_chkcount = 0;
-
- irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
- port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
- get_signals(info);
-
- if (info->netcount || (tty && C_CREAD(tty)))
- rx_start(info);
-
- spin_unlock_irqrestore(&info->lock, flags);
-}
-
-/* Reconfigure adapter based on new parameters
- */
-static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- unsigned cflag;
- int bits_per_char;
-
- if (!tty)
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_change_params(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- cflag = tty->termios.c_cflag;
-
- /* if B0 rate (hangup) specified then negate RTS and DTR */
- /* otherwise assert RTS and DTR */
- if (cflag & CBAUD)
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- else
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
-
- /* byte size and parity */
- if ((cflag & CSIZE) != CS8) {
- cflag &= ~CSIZE;
- cflag |= CS7;
- tty->termios.c_cflag = cflag;
- }
- info->params.data_bits = tty_get_char_size(cflag);
-
- if (cflag & CSTOPB)
- info->params.stop_bits = 2;
- else
- info->params.stop_bits = 1;
-
- info->params.parity = ASYNC_PARITY_NONE;
- if (cflag & PARENB) {
- if (cflag & PARODD)
- info->params.parity = ASYNC_PARITY_ODD;
- else
- info->params.parity = ASYNC_PARITY_EVEN;
- if (cflag & CMSPAR)
- info->params.parity = ASYNC_PARITY_SPACE;
- }
-
- /* calculate number of jiffies to transmit a full
- * FIFO (32 bytes) at specified data rate
- */
- bits_per_char = info->params.data_bits +
- info->params.stop_bits + 1;
-
- /* if port data rate is set to 460800 or less then
- * allow tty settings to override, otherwise keep the
- * current data rate.
- */
- if (info->params.data_rate <= 460800) {
- info->params.data_rate = tty_get_baud_rate(tty);
- }
-
- if (info->params.data_rate) {
- info->timeout = (32*HZ*bits_per_char) /
- info->params.data_rate;
- }
- info->timeout += HZ/50; /* Add .02 seconds of slop */
-
- tty_port_set_cts_flow(&info->port, cflag & CRTSCTS);
- tty_port_set_check_carrier(&info->port, ~cflag & CLOCAL);
-
- /* process tty input control flags */
-
- info->read_status_mask = 0;
- if (I_INPCK(tty))
- info->read_status_mask |= BIT7 | BIT6;
- if (I_IGNPAR(tty))
- info->ignore_status_mask |= BIT7 | BIT6;
-
- mgslpc_program_hw(info, tty);
-}
-
-/* Add a character to the transmit buffer
- */
-static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO) {
- printk("%s(%d):mgslpc_put_char(%d) on %s\n",
- __FILE__, __LINE__, ch, info->device_name);
- }
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
- return 0;
-
- if (!info->tx_buf)
- return 0;
-
- spin_lock_irqsave(&info->lock, flags);
-
- if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
- if (info->tx_count < TXBUFSIZE - 1) {
- info->tx_buf[info->tx_put++] = ch;
- info->tx_put &= TXBUFSIZE-1;
- info->tx_count++;
- }
- }
-
- spin_unlock_irqrestore(&info->lock, flags);
- return 1;
-}
-
-/* Enable transmitter so remaining characters in the
- * transmit buffer are sent.
- */
-static void mgslpc_flush_chars(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
- __FILE__, __LINE__, info->device_name, info->tx_count);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
- return;
-
- if (info->tx_count <= 0 || tty->flow.stopped ||
- tty->hw_stopped || !info->tx_buf)
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
- __FILE__, __LINE__, info->device_name);
-
- spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_active)
- tx_start(info, tty);
- spin_unlock_irqrestore(&info->lock, flags);
-}
-
-/* Send a block of data
- *
- * Arguments:
- *
- * tty pointer to tty information structure
- * buf pointer to buffer containing send data
- * count size of send data in bytes
- *
- * Returns: number of characters written
- */
-static int mgslpc_write(struct tty_struct * tty,
- const unsigned char *buf, int count)
-{
- int c, ret = 0;
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_write(%s) count=%d\n",
- __FILE__, __LINE__, info->device_name, count);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
- !info->tx_buf)
- goto cleanup;
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- if (count > TXBUFSIZE) {
- ret = -EIO;
- goto cleanup;
- }
- if (info->tx_active)
- goto cleanup;
- else if (info->tx_count)
- goto start;
- }
-
- for (;;) {
- c = min(count,
- min(TXBUFSIZE - info->tx_count - 1,
- TXBUFSIZE - info->tx_put));
- if (c <= 0)
- break;
-
- memcpy(info->tx_buf + info->tx_put, buf, c);
-
- spin_lock_irqsave(&info->lock, flags);
- info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
- info->tx_count += c;
- spin_unlock_irqrestore(&info->lock, flags);
-
- buf += c;
- count -= c;
- ret += c;
- }
-start:
- if (info->tx_count && !tty->flow.stopped && !tty->hw_stopped) {
- spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_active)
- tx_start(info, tty);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-cleanup:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_write(%s) returning=%d\n",
- __FILE__, __LINE__, info->device_name, ret);
- return ret;
-}
-
-/* Return the count of free bytes in transmit buffer
- */
-static unsigned int mgslpc_write_room(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- int ret;
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
- return 0;
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- /* HDLC (frame oriented) mode */
- if (info->tx_active)
- return 0;
- else
- return HDLC_MAX_FRAME_SIZE;
- } else {
- ret = TXBUFSIZE - info->tx_count - 1;
- if (ret < 0)
- ret = 0;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_write_room(%s)=%d\n",
- __FILE__, __LINE__, info->device_name, ret);
- return ret;
-}
-
-/* Return the count of bytes in transmit buffer
- */
-static unsigned int mgslpc_chars_in_buffer(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned int rc;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
- return 0;
-
- if (info->params.mode == MGSL_MODE_HDLC)
- rc = info->tx_active ? info->max_frame_size : 0;
- else
- rc = info->tx_count;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_chars_in_buffer(%s)=%u\n",
- __FILE__, __LINE__, info->device_name, rc);
-
- return rc;
-}
-
-/* Discard all data in the send buffer
- */
-static void mgslpc_flush_buffer(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
- return;
-
- spin_lock_irqsave(&info->lock, flags);
- info->tx_count = info->tx_put = info->tx_get = 0;
- del_timer(&info->tx_timer);
- spin_unlock_irqrestore(&info->lock, flags);
-
- wake_up_interruptible(&tty->write_wait);
- tty_wakeup(tty);
-}
-
-/* Send a high-priority XON/XOFF character
- */
-static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
- __FILE__, __LINE__, info->device_name, ch);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
- return;
-
- info->x_char = ch;
- if (ch) {
- spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_enabled)
- tx_start(info, tty);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-}
-
-/* Signal remote device to throttle send data (our receive data)
- */
-static void mgslpc_throttle(struct tty_struct * tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_throttle(%s) entry\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
- return;
-
- if (I_IXOFF(tty))
- mgslpc_send_xchar(tty, STOP_CHAR(tty));
-
- if (C_CRTSCTS(tty)) {
- spin_lock_irqsave(&info->lock, flags);
- info->serial_signals &= ~SerialSignal_RTS;
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-}
-
-/* Signal remote device to stop throttling send data (our receive data)
- */
-static void mgslpc_unthrottle(struct tty_struct * tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
- return;
-
- if (I_IXOFF(tty)) {
- if (info->x_char)
- info->x_char = 0;
- else
- mgslpc_send_xchar(tty, START_CHAR(tty));
- }
-
- if (C_CRTSCTS(tty)) {
- spin_lock_irqsave(&info->lock, flags);
- info->serial_signals |= SerialSignal_RTS;
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-}
-
-/* get the current serial statistics
- */
-static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
-{
- int err;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("get_params(%s)\n", info->device_name);
- if (!user_icount) {
- memset(&info->icount, 0, sizeof(info->icount));
- } else {
- COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
- if (err)
- return -EFAULT;
- }
- return 0;
-}
-
-/* get the current serial parameters
- */
-static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
-{
- int err;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("get_params(%s)\n", info->device_name);
- COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
- if (err)
- return -EFAULT;
- return 0;
-}
-
-/* set the serial parameters
- *
- * Arguments:
- *
- * info pointer to device instance data
- * new_params user buffer containing new serial params
- *
- * Returns: 0 if success, otherwise error code
- */
-static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
-{
- unsigned long flags;
- MGSL_PARAMS tmp_params;
- int err;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
- info->device_name);
- COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
- if (err) {
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):set_params(%s) user buffer copy failed\n",
- __FILE__, __LINE__, info->device_name);
- return -EFAULT;
- }
-
- spin_lock_irqsave(&info->lock, flags);
- memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
- spin_unlock_irqrestore(&info->lock, flags);
-
- mgslpc_change_params(info, tty);
-
- return 0;
-}
-
-static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
-{
- int err;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
- COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
- if (err)
- return -EFAULT;
- return 0;
-}
-
-static int set_txidle(MGSLPC_INFO * info, int idle_mode)
-{
- unsigned long flags;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
- spin_lock_irqsave(&info->lock, flags);
- info->idle_mode = idle_mode;
- tx_set_idle(info);
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
-{
- int err;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
- COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
- if (err)
- return -EFAULT;
- return 0;
-}
-
-static int set_interface(MGSLPC_INFO * info, int if_mode)
-{
- unsigned long flags;
- unsigned char val;
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("set_interface(%s,%d)\n", info->device_name, if_mode);
- spin_lock_irqsave(&info->lock, flags);
- info->if_mode = if_mode;
-
- val = read_reg(info, PVR) & 0x0f;
- switch (info->if_mode)
- {
- case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
- case MGSL_INTERFACE_V35: val |= PVR_V35; break;
- case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
- }
- write_reg(info, PVR, val);
-
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("set_txenable(%s,%d)\n", info->device_name, enable);
-
- spin_lock_irqsave(&info->lock, flags);
- if (enable) {
- if (!info->tx_enabled)
- tx_start(info, tty);
- } else {
- if (info->tx_enabled)
- tx_stop(info);
- }
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-static int tx_abort(MGSLPC_INFO * info)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("tx_abort(%s)\n", info->device_name);
-
- spin_lock_irqsave(&info->lock, flags);
- if (info->tx_active && info->tx_count &&
- info->params.mode == MGSL_MODE_HDLC) {
- /* clear data count so FIFO is not filled on next IRQ.
- * This results in underrun and abort transmission.
- */
- info->tx_count = info->tx_put = info->tx_get = 0;
- info->tx_aborting = true;
- }
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-static int set_rxenable(MGSLPC_INFO * info, int enable)
-{
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("set_rxenable(%s,%d)\n", info->device_name, enable);
-
- spin_lock_irqsave(&info->lock, flags);
- if (enable) {
- if (!info->rx_enabled)
- rx_start(info);
- } else {
- if (info->rx_enabled)
- rx_stop(info);
- }
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-/* wait for specified event to occur
- *
- * Arguments: info pointer to device instance data
- * mask pointer to bitmask of events to wait for
- * Return Value: 0 if successful and bit mask updated with
- * of events triggerred,
- * otherwise error code
- */
-static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
-{
- unsigned long flags;
- int s;
- int rc=0;
- struct mgsl_icount cprev, cnow;
- int events;
- int mask;
- struct _input_signal_events oldsigs, newsigs;
- DECLARE_WAITQUEUE(wait, current);
-
- COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
- if (rc)
- return -EFAULT;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("wait_events(%s,%d)\n", info->device_name, mask);
-
- spin_lock_irqsave(&info->lock, flags);
-
- /* return immediately if state matches requested events */
- get_signals(info);
- s = info->serial_signals;
- events = mask &
- ( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
- ((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
- ((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
- ((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
- if (events) {
- spin_unlock_irqrestore(&info->lock, flags);
- goto exit;
- }
-
- /* save current irq counts */
- cprev = info->icount;
- oldsigs = info->input_signal_events;
-
- if ((info->params.mode == MGSL_MODE_HDLC) &&
- (mask & MgslEvent_ExitHuntMode))
- irq_enable(info, CHA, IRQ_EXITHUNT);
-
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&info->event_wait_q, &wait);
-
- spin_unlock_irqrestore(&info->lock, flags);
-
-
- for(;;) {
- schedule();
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
-
- /* get current irq counts */
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount;
- newsigs = info->input_signal_events;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock, flags);
-
- /* if no change, wait aborted for some reason */
- if (newsigs.dsr_up == oldsigs.dsr_up &&
- newsigs.dsr_down == oldsigs.dsr_down &&
- newsigs.dcd_up == oldsigs.dcd_up &&
- newsigs.dcd_down == oldsigs.dcd_down &&
- newsigs.cts_up == oldsigs.cts_up &&
- newsigs.cts_down == oldsigs.cts_down &&
- newsigs.ri_up == oldsigs.ri_up &&
- newsigs.ri_down == oldsigs.ri_down &&
- cnow.exithunt == cprev.exithunt &&
- cnow.rxidle == cprev.rxidle) {
- rc = -EIO;
- break;
- }
-
- events = mask &
- ( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
- (newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
- (newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
- (newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
- (newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
- (newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
- (newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
- (newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
- (cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
- (cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
- if (events)
- break;
-
- cprev = cnow;
- oldsigs = newsigs;
- }
-
- remove_wait_queue(&info->event_wait_q, &wait);
- set_current_state(TASK_RUNNING);
-
- if (mask & MgslEvent_ExitHuntMode) {
- spin_lock_irqsave(&info->lock, flags);
- if (!waitqueue_active(&info->event_wait_q))
- irq_disable(info, CHA, IRQ_EXITHUNT);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-exit:
- if (rc == 0)
- PUT_USER(rc, events, mask_ptr);
- return rc;
-}
-
-static int modem_input_wait(MGSLPC_INFO *info,int arg)
-{
- unsigned long flags;
- int rc;
- struct mgsl_icount cprev, cnow;
- DECLARE_WAITQUEUE(wait, current);
-
- /* save current irq counts */
- spin_lock_irqsave(&info->lock, flags);
- cprev = info->icount;
- add_wait_queue(&info->status_event_wait_q, &wait);
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock, flags);
-
- for(;;) {
- schedule();
- if (signal_pending(current)) {
- rc = -ERESTARTSYS;
- break;
- }
-
- /* get new irq counts */
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount;
- set_current_state(TASK_INTERRUPTIBLE);
- spin_unlock_irqrestore(&info->lock, flags);
-
- /* if no change, wait aborted for some reason */
- if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
- cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
- rc = -EIO;
- break;
- }
-
- /* check for change in caller specified modem input */
- if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
- (arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
- (arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
- (arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
- rc = 0;
- break;
- }
-
- cprev = cnow;
- }
- remove_wait_queue(&info->status_event_wait_q, &wait);
- set_current_state(TASK_RUNNING);
- return rc;
-}
-
-/* return the state of the serial control and status signals
- */
-static int tiocmget(struct tty_struct *tty)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned int result;
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
- ((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
- ((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
- ((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
- ((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
- ((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tiocmget() value=%08X\n",
- __FILE__, __LINE__, info->device_name, result);
- return result;
-}
-
-/* set modem control signals (DTR/RTS)
- */
-static int tiocmset(struct tty_struct *tty,
- unsigned int set, unsigned int clear)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):%s tiocmset(%x,%x)\n",
- __FILE__, __LINE__, info->device_name, set, clear);
-
- if (set & TIOCM_RTS)
- info->serial_signals |= SerialSignal_RTS;
- if (set & TIOCM_DTR)
- info->serial_signals |= SerialSignal_DTR;
- if (clear & TIOCM_RTS)
- info->serial_signals &= ~SerialSignal_RTS;
- if (clear & TIOCM_DTR)
- info->serial_signals &= ~SerialSignal_DTR;
-
- spin_lock_irqsave(&info->lock, flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- return 0;
-}
-
-/* Set or clear transmit break condition
- *
- * Arguments: tty pointer to tty instance data
- * break_state -1=set break condition, 0=clear
- */
-static int mgslpc_break(struct tty_struct *tty, int break_state)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_break(%s,%d)\n",
- __FILE__, __LINE__, info->device_name, break_state);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
- return -EINVAL;
-
- spin_lock_irqsave(&info->lock, flags);
- if (break_state == -1)
- set_reg_bits(info, CHA+DAFO, BIT6);
- else
- clear_reg_bits(info, CHA+DAFO, BIT6);
- spin_unlock_irqrestore(&info->lock, flags);
- return 0;
-}
-
-static int mgslpc_get_icount(struct tty_struct *tty,
- struct serial_icounter_struct *icount)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- struct mgsl_icount cnow; /* kernel counter temps */
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- cnow = info->icount;
- spin_unlock_irqrestore(&info->lock, flags);
-
- icount->cts = cnow.cts;
- icount->dsr = cnow.dsr;
- icount->rng = cnow.rng;
- icount->dcd = cnow.dcd;
- icount->rx = cnow.rx;
- icount->tx = cnow.tx;
- icount->frame = cnow.frame;
- icount->overrun = cnow.overrun;
- icount->parity = cnow.parity;
- icount->brk = cnow.brk;
- icount->buf_overrun = cnow.buf_overrun;
-
- return 0;
-}
-
-/* Service an IOCTL request
- *
- * Arguments:
- *
- * tty pointer to tty instance data
- * cmd IOCTL command code
- * arg command argument/context
- *
- * Return Value: 0 if success, otherwise error code
- */
-static int mgslpc_ioctl(struct tty_struct *tty,
- unsigned int cmd, unsigned long arg)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- void __user *argp = (void __user *)arg;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__,
- info->device_name, cmd);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
- return -ENODEV;
-
- if (cmd != TIOCMIWAIT) {
- if (tty_io_error(tty))
- return -EIO;
- }
-
- switch (cmd) {
- case MGSL_IOCGPARAMS:
- return get_params(info, argp);
- case MGSL_IOCSPARAMS:
- return set_params(info, argp, tty);
- case MGSL_IOCGTXIDLE:
- return get_txidle(info, argp);
- case MGSL_IOCSTXIDLE:
- return set_txidle(info, (int)arg);
- case MGSL_IOCGIF:
- return get_interface(info, argp);
- case MGSL_IOCSIF:
- return set_interface(info,(int)arg);
- case MGSL_IOCTXENABLE:
- return set_txenable(info,(int)arg, tty);
- case MGSL_IOCRXENABLE:
- return set_rxenable(info,(int)arg);
- case MGSL_IOCTXABORT:
- return tx_abort(info);
- case MGSL_IOCGSTATS:
- return get_stats(info, argp);
- case MGSL_IOCWAITEVENT:
- return wait_events(info, argp);
- case TIOCMIWAIT:
- return modem_input_wait(info,(int)arg);
- default:
- return -ENOIOCTLCMD;
- }
- return 0;
-}
-
-/* Set new termios settings
- *
- * Arguments:
- *
- * tty pointer to tty structure
- * termios pointer to buffer to hold returned old termios
- */
-static void mgslpc_set_termios(struct tty_struct *tty,
- const struct ktermios *old_termios)
-{
- MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__,
- tty->driver->name);
-
- /* just return if nothing has changed */
- if ((tty->termios.c_cflag == old_termios->c_cflag)
- && (RELEVANT_IFLAG(tty->termios.c_iflag)
- == RELEVANT_IFLAG(old_termios->c_iflag)))
- return;
-
- mgslpc_change_params(info, tty);
-
- /* Handle transition to B0 status */
- if ((old_termios->c_cflag & CBAUD) && !C_BAUD(tty)) {
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- spin_lock_irqsave(&info->lock, flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-
- /* Handle transition away from B0 status */
- if (!(old_termios->c_cflag & CBAUD) && C_BAUD(tty)) {
- info->serial_signals |= SerialSignal_DTR;
- if (!C_CRTSCTS(tty) || !tty_throttled(tty))
- info->serial_signals |= SerialSignal_RTS;
- spin_lock_irqsave(&info->lock, flags);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- }
-
- /* Handle turning off CRTSCTS */
- if (old_termios->c_cflag & CRTSCTS && !C_CRTSCTS(tty)) {
- tty->hw_stopped = false;
- tx_release(tty);
- }
-}
-
-static void mgslpc_close(struct tty_struct *tty, struct file * filp)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- struct tty_port *port = &info->port;
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
- __FILE__, __LINE__, info->device_name, port->count);
-
- if (tty_port_close_start(port, tty, filp) == 0)
- goto cleanup;
-
- if (tty_port_initialized(port))
- mgslpc_wait_until_sent(tty, info->timeout);
-
- mgslpc_flush_buffer(tty);
-
- tty_ldisc_flush(tty);
- shutdown(info, tty);
-
- tty_port_close_end(port, tty);
- tty_port_tty_set(port, NULL);
-cleanup:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__,
- tty->driver->name, port->count);
-}
-
-/* Wait until the transmitter is empty.
- */
-static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
- unsigned long orig_jiffies, char_time;
-
- if (!info)
- return;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
- return;
-
- if (!tty_port_initialized(&info->port))
- goto exit;
-
- orig_jiffies = jiffies;
-
- /* Set check interval to 1/5 of estimated time to
- * send a character, and make it at least 1. The check
- * interval should also be less than the timeout.
- * Note: use tight timings here to satisfy the NIST-PCTS.
- */
-
- if (info->params.data_rate) {
- char_time = info->timeout/(32 * 5);
- if (!char_time)
- char_time++;
- } else
- char_time = 1;
-
- if (timeout)
- char_time = min_t(unsigned long, char_time, timeout);
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- while (info->tx_active) {
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- } else {
- while ((info->tx_count || info->tx_active) &&
- info->tx_enabled) {
- msleep_interruptible(jiffies_to_msecs(char_time));
- if (signal_pending(current))
- break;
- if (timeout && time_after(jiffies, orig_jiffies + timeout))
- break;
- }
- }
-
-exit:
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
- __FILE__, __LINE__, info->device_name);
-}
-
-/* Called by tty_hangup() when a hangup is signaled.
- * This is the same as closing all open files for the port.
- */
-static void mgslpc_hangup(struct tty_struct *tty)
-{
- MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_hangup(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
- return;
-
- mgslpc_flush_buffer(tty);
- shutdown(info, tty);
- tty_port_hangup(&info->port);
-}
-
-static bool carrier_raised(struct tty_port *port)
-{
- MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- return info->serial_signals & SerialSignal_DCD;
-}
-
-static void dtr_rts(struct tty_port *port, bool active)
-{
- MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- if (active)
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- else
- info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
- set_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
-}
-
-
-static int mgslpc_open(struct tty_struct *tty, struct file * filp)
-{
- MGSLPC_INFO *info;
- struct tty_port *port;
- int retval, line;
- unsigned long flags;
-
- /* verify range of specified line number */
- line = tty->index;
- if (line >= mgslpc_device_count) {
- printk("%s(%d):mgslpc_open with invalid line #%d.\n",
- __FILE__, __LINE__, line);
- return -ENODEV;
- }
-
- /* find the info structure for the specified line */
- info = mgslpc_device_list;
- while(info && info->line != line)
- info = info->next_device;
- if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
- return -ENODEV;
-
- port = &info->port;
- tty->driver_data = info;
- tty_port_tty_set(port, tty);
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
- __FILE__, __LINE__, tty->driver->name, port->count);
-
- spin_lock_irqsave(&info->netlock, flags);
- if (info->netcount) {
- retval = -EBUSY;
- spin_unlock_irqrestore(&info->netlock, flags);
- goto cleanup;
- }
- spin_lock(&port->lock);
- port->count++;
- spin_unlock(&port->lock);
- spin_unlock_irqrestore(&info->netlock, flags);
-
- if (port->count == 1) {
- /* 1st open on this device, init hardware */
- retval = startup(info, tty);
- if (retval < 0)
- goto cleanup;
- }
-
- retval = tty_port_block_til_ready(&info->port, tty, filp);
- if (retval) {
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):block_til_ready(%s) returned %d\n",
- __FILE__, __LINE__, info->device_name, retval);
- goto cleanup;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):mgslpc_open(%s) success\n",
- __FILE__, __LINE__, info->device_name);
- retval = 0;
-
-cleanup:
- return retval;
-}
-
-/*
- * /proc fs routines....
- */
-
-static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
-{
- char stat_buf[30];
- unsigned long flags;
-
- seq_printf(m, "%s:io:%04X irq:%d",
- info->device_name, info->io_base, info->irq_level);
-
- /* output current serial signal states */
- spin_lock_irqsave(&info->lock, flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (info->serial_signals & SerialSignal_RTS)
- strcat(stat_buf, "|RTS");
- if (info->serial_signals & SerialSignal_CTS)
- strcat(stat_buf, "|CTS");
- if (info->serial_signals & SerialSignal_DTR)
- strcat(stat_buf, "|DTR");
- if (info->serial_signals & SerialSignal_DSR)
- strcat(stat_buf, "|DSR");
- if (info->serial_signals & SerialSignal_DCD)
- strcat(stat_buf, "|CD");
- if (info->serial_signals & SerialSignal_RI)
- strcat(stat_buf, "|RI");
-
- if (info->params.mode == MGSL_MODE_HDLC) {
- seq_printf(m, " HDLC txok:%d rxok:%d",
- info->icount.txok, info->icount.rxok);
- if (info->icount.txunder)
- seq_printf(m, " txunder:%d", info->icount.txunder);
- if (info->icount.txabort)
- seq_printf(m, " txabort:%d", info->icount.txabort);
- if (info->icount.rxshort)
- seq_printf(m, " rxshort:%d", info->icount.rxshort);
- if (info->icount.rxlong)
- seq_printf(m, " rxlong:%d", info->icount.rxlong);
- if (info->icount.rxover)
- seq_printf(m, " rxover:%d", info->icount.rxover);
- if (info->icount.rxcrc)
- seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
- } else {
- seq_printf(m, " ASYNC tx:%d rx:%d",
- info->icount.tx, info->icount.rx);
- if (info->icount.frame)
- seq_printf(m, " fe:%d", info->icount.frame);
- if (info->icount.parity)
- seq_printf(m, " pe:%d", info->icount.parity);
- if (info->icount.brk)
- seq_printf(m, " brk:%d", info->icount.brk);
- if (info->icount.overrun)
- seq_printf(m, " oe:%d", info->icount.overrun);
- }
-
- /* Append serial signal status to end */
- seq_printf(m, " %s\n", stat_buf+1);
-
- seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
- info->tx_active,info->bh_requested,info->bh_running,
- info->pending_bh);
-}
-
-/* Called to print information about devices
- */
-static int mgslpc_proc_show(struct seq_file *m, void *v)
-{
- MGSLPC_INFO *info;
-
- seq_printf(m, "synclink driver:%s\n", driver_version);
-
- info = mgslpc_device_list;
- while (info) {
- line_info(m, info);
- info = info->next_device;
- }
- return 0;
-}
-
-static int rx_alloc_buffers(MGSLPC_INFO *info)
-{
- /* each buffer has header and data */
- info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
-
- /* calculate total allocation size for 8 buffers */
- info->rx_buf_total_size = info->rx_buf_size * 8;
-
- /* limit total allocated memory */
- if (info->rx_buf_total_size > 0x10000)
- info->rx_buf_total_size = 0x10000;
-
- /* calculate number of buffers */
- info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
-
- info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
- if (info->rx_buf == NULL)
- return -ENOMEM;
-
- /* unused flag buffer to satisfy receive_buf calling interface */
- info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
- if (!info->flag_buf) {
- kfree(info->rx_buf);
- info->rx_buf = NULL;
- return -ENOMEM;
- }
-
- rx_reset_buffers(info);
- return 0;
-}
-
-static void rx_free_buffers(MGSLPC_INFO *info)
-{
- kfree(info->rx_buf);
- info->rx_buf = NULL;
- kfree(info->flag_buf);
- info->flag_buf = NULL;
-}
-
-static int claim_resources(MGSLPC_INFO *info)
-{
- if (rx_alloc_buffers(info) < 0) {
- printk("Can't allocate rx buffer %s\n", info->device_name);
- release_resources(info);
- return -ENODEV;
- }
- return 0;
-}
-
-static void release_resources(MGSLPC_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("release_resources(%s)\n", info->device_name);
- rx_free_buffers(info);
-}
-
-/* Add the specified device instance data structure to the
- * global linked list of devices and increment the device count.
- *
- * Arguments: info pointer to device instance data
- */
-static int mgslpc_add_device(MGSLPC_INFO *info)
-{
- MGSLPC_INFO *current_dev = NULL;
- struct device *tty_dev;
- int ret;
-
- info->next_device = NULL;
- info->line = mgslpc_device_count;
- sprintf(info->device_name,"ttySLP%d",info->line);
-
- if (info->line < MAX_DEVICE_COUNT) {
- if (maxframe[info->line])
- info->max_frame_size = maxframe[info->line];
- }
-
- mgslpc_device_count++;
-
- if (!mgslpc_device_list)
- mgslpc_device_list = info;
- else {
- current_dev = mgslpc_device_list;
- while (current_dev->next_device)
- current_dev = current_dev->next_device;
- current_dev->next_device = info;
- }
-
- if (info->max_frame_size < 4096)
- info->max_frame_size = 4096;
- else if (info->max_frame_size > 65535)
- info->max_frame_size = 65535;
-
- printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n",
- info->device_name, info->io_base, info->irq_level);
-
-#if SYNCLINK_GENERIC_HDLC
- ret = hdlcdev_init(info);
- if (ret != 0)
- goto failed;
-#endif
-
- tty_dev = tty_port_register_device(&info->port, serial_driver, info->line,
- &info->p_dev->dev);
- if (IS_ERR(tty_dev)) {
- ret = PTR_ERR(tty_dev);
-#if SYNCLINK_GENERIC_HDLC
- hdlcdev_exit(info);
-#endif
- goto failed;
- }
-
- return 0;
-
-failed:
- if (current_dev)
- current_dev->next_device = NULL;
- else
- mgslpc_device_list = NULL;
- mgslpc_device_count--;
- return ret;
-}
-
-static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
-{
- MGSLPC_INFO *info = mgslpc_device_list;
- MGSLPC_INFO *last = NULL;
-
- while(info) {
- if (info == remove_info) {
- if (last)
- last->next_device = info->next_device;
- else
- mgslpc_device_list = info->next_device;
- tty_unregister_device(serial_driver, info->line);
-#if SYNCLINK_GENERIC_HDLC
- hdlcdev_exit(info);
-#endif
- release_resources(info);
- tty_port_destroy(&info->port);
- kfree(info);
- mgslpc_device_count--;
- return;
- }
- last = info;
- info = info->next_device;
- }
-}
-
-static const struct pcmcia_device_id mgslpc_ids[] = {
- PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
- PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
-
-static struct pcmcia_driver mgslpc_driver = {
- .owner = THIS_MODULE,
- .name = "synclink_cs",
- .probe = mgslpc_probe,
- .remove = mgslpc_detach,
- .id_table = mgslpc_ids,
- .suspend = mgslpc_suspend,
- .resume = mgslpc_resume,
-};
-
-static const struct tty_operations mgslpc_ops = {
- .open = mgslpc_open,
- .close = mgslpc_close,
- .write = mgslpc_write,
- .put_char = mgslpc_put_char,
- .flush_chars = mgslpc_flush_chars,
- .write_room = mgslpc_write_room,
- .chars_in_buffer = mgslpc_chars_in_buffer,
- .flush_buffer = mgslpc_flush_buffer,
- .ioctl = mgslpc_ioctl,
- .throttle = mgslpc_throttle,
- .unthrottle = mgslpc_unthrottle,
- .send_xchar = mgslpc_send_xchar,
- .break_ctl = mgslpc_break,
- .wait_until_sent = mgslpc_wait_until_sent,
- .set_termios = mgslpc_set_termios,
- .stop = tx_pause,
- .start = tx_release,
- .hangup = mgslpc_hangup,
- .tiocmget = tiocmget,
- .tiocmset = tiocmset,
- .get_icount = mgslpc_get_icount,
- .proc_show = mgslpc_proc_show,
-};
-
-static int __init synclink_cs_init(void)
-{
- int rc;
-
- if (break_on_load) {
- mgslpc_get_text_ptr();
- BREAKPOINT();
- }
-
- serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
- TTY_DRIVER_REAL_RAW |
- TTY_DRIVER_DYNAMIC_DEV);
- if (IS_ERR(serial_driver)) {
- rc = PTR_ERR(serial_driver);
- goto err;
- }
-
- /* Initialize the tty_driver structure */
- serial_driver->driver_name = "synclink_cs";
- serial_driver->name = "ttySLP";
- serial_driver->major = ttymajor;
- serial_driver->minor_start = 64;
- serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
- serial_driver->subtype = SERIAL_TYPE_NORMAL;
- serial_driver->init_termios = tty_std_termios;
- serial_driver->init_termios.c_cflag =
- B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty_set_operations(serial_driver, &mgslpc_ops);
-
- rc = tty_register_driver(serial_driver);
- if (rc < 0) {
- printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
- __FILE__, __LINE__);
- goto err_put_tty;
- }
-
- rc = pcmcia_register_driver(&mgslpc_driver);
- if (rc < 0)
- goto err_unreg_tty;
-
- printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
- serial_driver->major);
-
- return 0;
-err_unreg_tty:
- tty_unregister_driver(serial_driver);
-err_put_tty:
- tty_driver_kref_put(serial_driver);
-err:
- return rc;
-}
-
-static void __exit synclink_cs_exit(void)
-{
- pcmcia_unregister_driver(&mgslpc_driver);
- tty_unregister_driver(serial_driver);
- tty_driver_kref_put(serial_driver);
-}
-
-module_init(synclink_cs_init);
-module_exit(synclink_cs_exit);
-
-static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
-{
- unsigned int M, N;
- unsigned char val;
-
- /* note:standard BRG mode is broken in V3.2 chip
- * so enhanced mode is always used
- */
-
- if (rate) {
- N = 3686400 / rate;
- if (!N)
- N = 1;
- N >>= 1;
- for (M = 1; N > 64 && M < 16; M++)
- N >>= 1;
- N--;
-
- /* BGR[5..0] = N
- * BGR[9..6] = M
- * BGR[7..0] contained in BGR register
- * BGR[9..8] contained in CCR2[7..6]
- * divisor = (N+1)*2^M
- *
- * Note: M *must* not be zero (causes asymetric duty cycle)
- */
- write_reg(info, (unsigned char) (channel + BGR),
- (unsigned char) ((M << 6) + N));
- val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
- val |= ((M << 4) & 0xc0);
- write_reg(info, (unsigned char) (channel + CCR2), val);
- }
-}
-
-/* Enabled the AUX clock output at the specified frequency.
- */
-static void enable_auxclk(MGSLPC_INFO *info)
-{
- unsigned char val;
-
- /* MODE
- *
- * 07..06 MDS[1..0] 10 = transparent HDLC mode
- * 05 ADM Address Mode, 0 = no addr recognition
- * 04 TMD Timer Mode, 0 = external
- * 03 RAC Receiver Active, 0 = inactive
- * 02 RTS 0=RTS active during xmit, 1=RTS always active
- * 01 TRS Timer Resolution, 1=512
- * 00 TLP Test Loop, 0 = no loop
- *
- * 1000 0010
- */
- val = 0x82;
-
- /* channel B RTS is used to enable AUXCLK driver on SP505 */
- if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
- val |= BIT2;
- write_reg(info, CHB + MODE, val);
-
- /* CCR0
- *
- * 07 PU Power Up, 1=active, 0=power down
- * 06 MCE Master Clock Enable, 1=enabled
- * 05 Reserved, 0
- * 04..02 SC[2..0] Encoding
- * 01..00 SM[1..0] Serial Mode, 00=HDLC
- *
- * 11000000
- */
- write_reg(info, CHB + CCR0, 0xc0);
-
- /* CCR1
- *
- * 07 SFLG Shared Flag, 0 = disable shared flags
- * 06 GALP Go Active On Loop, 0 = not used
- * 05 GLP Go On Loop, 0 = not used
- * 04 ODS Output Driver Select, 1=TxD is push-pull output
- * 03 ITF Interframe Time Fill, 0=mark, 1=flag
- * 02..00 CM[2..0] Clock Mode
- *
- * 0001 0111
- */
- write_reg(info, CHB + CCR1, 0x17);
-
- /* CCR2 (Channel B)
- *
- * 07..06 BGR[9..8] Baud rate bits 9..8
- * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
- * 04 SSEL Clock source select, 1=submode b
- * 03 TOE 0=TxCLK is input, 1=TxCLK is output
- * 02 RWX Read/Write Exchange 0=disabled
- * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
- * 00 DIV, data inversion 0=disabled, 1=enabled
- *
- * 0011 1000
- */
- if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
- write_reg(info, CHB + CCR2, 0x38);
- else
- write_reg(info, CHB + CCR2, 0x30);
-
- /* CCR4
- *
- * 07 MCK4 Master Clock Divide by 4, 1=enabled
- * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
- * 05 TST1 Test Pin, 0=normal operation
- * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
- * 03..02 Reserved, must be 0
- * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
- *
- * 0101 0000
- */
- write_reg(info, CHB + CCR4, 0x50);
-
- /* if auxclk not enabled, set internal BRG so
- * CTS transitions can be detected (requires TxC)
- */
- if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
- mgslpc_set_rate(info, CHB, info->params.clock_speed);
- else
- mgslpc_set_rate(info, CHB, 921600);
-}
-
-static void loopback_enable(MGSLPC_INFO *info)
-{
- unsigned char val;
-
- /* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
- val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0);
- write_reg(info, CHA + CCR1, val);
-
- /* CCR2:04 SSEL Clock source select, 1=submode b */
- val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5);
- write_reg(info, CHA + CCR2, val);
-
- /* set LinkSpeed if available, otherwise default to 2Mbps */
- if (info->params.clock_speed)
- mgslpc_set_rate(info, CHA, info->params.clock_speed);
- else
- mgslpc_set_rate(info, CHA, 1843200);
-
- /* MODE:00 TLP Test Loop, 1=loopback enabled */
- val = read_reg(info, CHA + MODE) | BIT0;
- write_reg(info, CHA + MODE, val);
-}
-
-static void hdlc_mode(MGSLPC_INFO *info)
-{
- unsigned char val;
- unsigned char clkmode, clksubmode;
-
- /* disable all interrupts */
- irq_disable(info, CHA, 0xffff);
- irq_disable(info, CHB, 0xffff);
- port_irq_disable(info, 0xff);
-
- /* assume clock mode 0a, rcv=RxC xmt=TxC */
- clkmode = clksubmode = 0;
- if (info->params.flags & HDLC_FLAG_RXC_DPLL
- && info->params.flags & HDLC_FLAG_TXC_DPLL) {
- /* clock mode 7a, rcv = DPLL, xmt = DPLL */
- clkmode = 7;
- } else if (info->params.flags & HDLC_FLAG_RXC_BRG
- && info->params.flags & HDLC_FLAG_TXC_BRG) {
- /* clock mode 7b, rcv = BRG, xmt = BRG */
- clkmode = 7;
- clksubmode = 1;
- } else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
- if (info->params.flags & HDLC_FLAG_TXC_BRG) {
- /* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
- clkmode = 6;
- clksubmode = 1;
- } else {
- /* clock mode 6a, rcv = DPLL, xmt = TxC */
- clkmode = 6;
- }
- } else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
- /* clock mode 0b, rcv = RxC, xmt = BRG */
- clksubmode = 1;
- }
-
- /* MODE
- *
- * 07..06 MDS[1..0] 10 = transparent HDLC mode
- * 05 ADM Address Mode, 0 = no addr recognition
- * 04 TMD Timer Mode, 0 = external
- * 03 RAC Receiver Active, 0 = inactive
- * 02 RTS 0=RTS active during xmit, 1=RTS always active
- * 01 TRS Timer Resolution, 1=512
- * 00 TLP Test Loop, 0 = no loop
- *
- * 1000 0010
- */
- val = 0x82;
- if (info->params.loopback)
- val |= BIT0;
-
- /* preserve RTS state */
- if (info->serial_signals & SerialSignal_RTS)
- val |= BIT2;
- write_reg(info, CHA + MODE, val);
-
- /* CCR0
- *
- * 07 PU Power Up, 1=active, 0=power down
- * 06 MCE Master Clock Enable, 1=enabled
- * 05 Reserved, 0
- * 04..02 SC[2..0] Encoding
- * 01..00 SM[1..0] Serial Mode, 00=HDLC
- *
- * 11000000
- */
- val = 0xc0;
- switch (info->params.encoding)
- {
- case HDLC_ENCODING_NRZI:
- val |= BIT3;
- break;
- case HDLC_ENCODING_BIPHASE_SPACE:
- val |= BIT4;
- break; // FM0
- case HDLC_ENCODING_BIPHASE_MARK:
- val |= BIT4 | BIT2;
- break; // FM1
- case HDLC_ENCODING_BIPHASE_LEVEL:
- val |= BIT4 | BIT3;
- break; // Manchester
- }
- write_reg(info, CHA + CCR0, val);
-
- /* CCR1
- *
- * 07 SFLG Shared Flag, 0 = disable shared flags
- * 06 GALP Go Active On Loop, 0 = not used
- * 05 GLP Go On Loop, 0 = not used
- * 04 ODS Output Driver Select, 1=TxD is push-pull output
- * 03 ITF Interframe Time Fill, 0=mark, 1=flag
- * 02..00 CM[2..0] Clock Mode
- *
- * 0001 0000
- */
- val = 0x10 + clkmode;
- write_reg(info, CHA + CCR1, val);
-
- /* CCR2
- *
- * 07..06 BGR[9..8] Baud rate bits 9..8
- * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
- * 04 SSEL Clock source select, 1=submode b
- * 03 TOE 0=TxCLK is input, 0=TxCLK is input
- * 02 RWX Read/Write Exchange 0=disabled
- * 01 C32, CRC select, 0=CRC-16, 1=CRC-32
- * 00 DIV, data inversion 0=disabled, 1=enabled
- *
- * 0000 0000
- */
- val = 0x00;
- if (clkmode == 2 || clkmode == 3 || clkmode == 6
- || clkmode == 7 || (clkmode == 0 && clksubmode == 1))
- val |= BIT5;
- if (clksubmode)
- val |= BIT4;
- if (info->params.crc_type == HDLC_CRC_32_CCITT)
- val |= BIT1;
- if (info->params.encoding == HDLC_ENCODING_NRZB)
- val |= BIT0;
- write_reg(info, CHA + CCR2, val);
-
- /* CCR3
- *
- * 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
- * 05 EPT Enable preamble transmission, 1=enabled
- * 04 RADD Receive address pushed to FIFO, 0=disabled
- * 03 CRL CRC Reset Level, 0=FFFF
- * 02 RCRC Rx CRC 0=On 1=Off
- * 01 TCRC Tx CRC 0=On 1=Off
- * 00 PSD DPLL Phase Shift Disable
- *
- * 0000 0000
- */
- val = 0x00;
- if (info->params.crc_type == HDLC_CRC_NONE)
- val |= BIT2 | BIT1;
- if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
- val |= BIT5;
- switch (info->params.preamble_length)
- {
- case HDLC_PREAMBLE_LENGTH_16BITS:
- val |= BIT6;
- break;
- case HDLC_PREAMBLE_LENGTH_32BITS:
- val |= BIT6;
- break;
- case HDLC_PREAMBLE_LENGTH_64BITS:
- val |= BIT7 | BIT6;
- break;
- }
- write_reg(info, CHA + CCR3, val);
-
- /* PRE - Preamble pattern */
- val = 0;
- switch (info->params.preamble)
- {
- case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
- case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
- case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
- case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
- }
- write_reg(info, CHA + PRE, val);
-
- /* CCR4
- *
- * 07 MCK4 Master Clock Divide by 4, 1=enabled
- * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
- * 05 TST1 Test Pin, 0=normal operation
- * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
- * 03..02 Reserved, must be 0
- * 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
- *
- * 0101 0000
- */
- val = 0x50;
- write_reg(info, CHA + CCR4, val);
- if (info->params.flags & HDLC_FLAG_RXC_DPLL)
- mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
- else
- mgslpc_set_rate(info, CHA, info->params.clock_speed);
-
- /* RLCR Receive length check register
- *
- * 7 1=enable receive length check
- * 6..0 Max frame length = (RL + 1) * 32
- */
- write_reg(info, CHA + RLCR, 0);
-
- /* XBCH Transmit Byte Count High
- *
- * 07 DMA mode, 0 = interrupt driven
- * 06 NRM, 0=ABM (ignored)
- * 05 CAS Carrier Auto Start
- * 04 XC Transmit Continuously (ignored)
- * 03..00 XBC[10..8] Transmit byte count bits 10..8
- *
- * 0000 0000
- */
- val = 0x00;
- if (info->params.flags & HDLC_FLAG_AUTO_DCD)
- val |= BIT5;
- write_reg(info, CHA + XBCH, val);
- enable_auxclk(info);
- if (info->params.loopback || info->testing_irq)
- loopback_enable(info);
- if (info->params.flags & HDLC_FLAG_AUTO_CTS)
- {
- irq_enable(info, CHB, IRQ_CTS);
- /* PVR[3] 1=AUTO CTS active */
- set_reg_bits(info, CHA + PVR, BIT3);
- } else
- clear_reg_bits(info, CHA + PVR, BIT3);
-
- irq_enable(info, CHA,
- IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT |
- IRQ_UNDERRUN | IRQ_TXFIFO);
- issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
- wait_command_complete(info, CHA);
- read_reg16(info, CHA + ISR); /* clear pending IRQs */
-
- /* Master clock mode enabled above to allow reset commands
- * to complete even if no data clocks are present.
- *
- * Disable master clock mode for normal communications because
- * V3.2 of the ESCC2 has a bug that prevents the transmit all sent
- * IRQ when in master clock mode.
- *
- * Leave master clock mode enabled for IRQ test because the
- * timer IRQ used by the test can only happen in master clock mode.
- */
- if (!info->testing_irq)
- clear_reg_bits(info, CHA + CCR0, BIT6);
-
- tx_set_idle(info);
-
- tx_stop(info);
- rx_stop(info);
-}
-
-static void rx_stop(MGSLPC_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):rx_stop(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- /* MODE:03 RAC Receiver Active, 0=inactive */
- clear_reg_bits(info, CHA + MODE, BIT3);
-
- info->rx_enabled = false;
- info->rx_overflow = false;
-}
-
-static void rx_start(MGSLPC_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):rx_start(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- rx_reset_buffers(info);
- info->rx_enabled = false;
- info->rx_overflow = false;
-
- /* MODE:03 RAC Receiver Active, 1=active */
- set_reg_bits(info, CHA + MODE, BIT3);
-
- info->rx_enabled = true;
-}
-
-static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):tx_start(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- if (info->tx_count) {
- /* If auto RTS enabled and RTS is inactive, then assert */
- /* RTS and set a flag indicating that the driver should */
- /* negate RTS when the transmission completes. */
- info->drop_rts_on_tx_done = false;
-
- if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
- get_signals(info);
- if (!(info->serial_signals & SerialSignal_RTS)) {
- info->serial_signals |= SerialSignal_RTS;
- set_signals(info);
- info->drop_rts_on_tx_done = true;
- }
- }
-
- if (info->params.mode == MGSL_MODE_ASYNC) {
- if (!info->tx_active) {
- info->tx_active = true;
- tx_ready(info, tty);
- }
- } else {
- info->tx_active = true;
- tx_ready(info, tty);
- mod_timer(&info->tx_timer, jiffies +
- msecs_to_jiffies(5000));
- }
- }
-
- if (!info->tx_enabled)
- info->tx_enabled = true;
-}
-
-static void tx_stop(MGSLPC_INFO *info)
-{
- if (debug_level >= DEBUG_LEVEL_ISR)
- printk("%s(%d):tx_stop(%s)\n",
- __FILE__, __LINE__, info->device_name);
-
- del_timer(&info->tx_timer);
-
- info->tx_enabled = false;
- info->tx_active = false;
-}
-
-/* Reset the adapter to a known state and prepare it for further use.
- */
-static void reset_device(MGSLPC_INFO *info)
-{
- /* power up both channels (set BIT7) */
- write_reg(info, CHA + CCR0, 0x80);
- write_reg(info, CHB + CCR0, 0x80);
- write_reg(info, CHA + MODE, 0);
- write_reg(info, CHB + MODE, 0);
-
- /* disable all interrupts */
- irq_disable(info, CHA, 0xffff);
- irq_disable(info, CHB, 0xffff);
- port_irq_disable(info, 0xff);
-
- /* PCR Port Configuration Register
- *
- * 07..04 DEC[3..0] Serial I/F select outputs
- * 03 output, 1=AUTO CTS control enabled
- * 02 RI Ring Indicator input 0=active
- * 01 DSR input 0=active
- * 00 DTR output 0=active
- *
- * 0000 0110
- */
- write_reg(info, PCR, 0x06);
-
- /* PVR Port Value Register
- *
- * 07..04 DEC[3..0] Serial I/F select (0000=disabled)
- * 03 AUTO CTS output 1=enabled
- * 02 RI Ring Indicator input
- * 01 DSR input
- * 00 DTR output (1=inactive)
- *
- * 0000 0001
- */
-// write_reg(info, PVR, PVR_DTR);
-
- /* IPC Interrupt Port Configuration
- *
- * 07 VIS 1=Masked interrupts visible
- * 06..05 Reserved, 0
- * 04..03 SLA Slave address, 00 ignored
- * 02 CASM Cascading Mode, 1=daisy chain
- * 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
- *
- * 0000 0101
- */
- write_reg(info, IPC, 0x05);
-}
-
-static void async_mode(MGSLPC_INFO *info)
-{
- unsigned char val;
-
- /* disable all interrupts */
- irq_disable(info, CHA, 0xffff);
- irq_disable(info, CHB, 0xffff);
- port_irq_disable(info, 0xff);
-
- /* MODE
- *
- * 07 Reserved, 0
- * 06 FRTS RTS State, 0=active
- * 05 FCTS Flow Control on CTS
- * 04 FLON Flow Control Enable
- * 03 RAC Receiver Active, 0 = inactive
- * 02 RTS 0=Auto RTS, 1=manual RTS
- * 01 TRS Timer Resolution, 1=512
- * 00 TLP Test Loop, 0 = no loop
- *
- * 0000 0110
- */
- val = 0x06;
- if (info->params.loopback)
- val |= BIT0;
-
- /* preserve RTS state */
- if (!(info->serial_signals & SerialSignal_RTS))
- val |= BIT6;
- write_reg(info, CHA + MODE, val);
-
- /* CCR0
- *
- * 07 PU Power Up, 1=active, 0=power down
- * 06 MCE Master Clock Enable, 1=enabled
- * 05 Reserved, 0
- * 04..02 SC[2..0] Encoding, 000=NRZ
- * 01..00 SM[1..0] Serial Mode, 11=Async
- *
- * 1000 0011
- */
- write_reg(info, CHA + CCR0, 0x83);
-
- /* CCR1
- *
- * 07..05 Reserved, 0
- * 04 ODS Output Driver Select, 1=TxD is push-pull output
- * 03 BCR Bit Clock Rate, 1=16x
- * 02..00 CM[2..0] Clock Mode, 111=BRG
- *
- * 0001 1111
- */
- write_reg(info, CHA + CCR1, 0x1f);
-
- /* CCR2 (channel A)
- *
- * 07..06 BGR[9..8] Baud rate bits 9..8
- * 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
- * 04 SSEL Clock source select, 1=submode b
- * 03 TOE 0=TxCLK is input, 0=TxCLK is input
- * 02 RWX Read/Write Exchange 0=disabled
- * 01 Reserved, 0
- * 00 DIV, data inversion 0=disabled, 1=enabled
- *
- * 0001 0000
- */
- write_reg(info, CHA + CCR2, 0x10);
-
- /* CCR3
- *
- * 07..01 Reserved, 0
- * 00 PSD DPLL Phase Shift Disable
- *
- * 0000 0000
- */
- write_reg(info, CHA + CCR3, 0);
-
- /* CCR4
- *
- * 07 MCK4 Master Clock Divide by 4, 1=enabled
- * 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
- * 05 TST1 Test Pin, 0=normal operation
- * 04 ICD Ivert Carrier Detect, 1=enabled (active low)
- * 03..00 Reserved, must be 0
- *
- * 0101 0000
- */
- write_reg(info, CHA + CCR4, 0x50);
- mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
-
- /* DAFO Data Format
- *
- * 07 Reserved, 0
- * 06 XBRK transmit break, 0=normal operation
- * 05 Stop bits (0=1, 1=2)
- * 04..03 PAR[1..0] Parity (01=odd, 10=even)
- * 02 PAREN Parity Enable
- * 01..00 CHL[1..0] Character Length (00=8, 01=7)
- *
- */
- val = 0x00;
- if (info->params.data_bits != 8)
- val |= BIT0; /* 7 bits */
- if (info->params.stop_bits != 1)
- val |= BIT5;
- if (info->params.parity != ASYNC_PARITY_NONE)
- {
- val |= BIT2; /* Parity enable */
- if (info->params.parity == ASYNC_PARITY_ODD)
- val |= BIT3;
- else
- val |= BIT4;
- }
- write_reg(info, CHA + DAFO, val);
-
- /* RFC Rx FIFO Control
- *
- * 07 Reserved, 0
- * 06 DPS, 1=parity bit not stored in data byte
- * 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
- * 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
- * 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
- * 01 Reserved, 0
- * 00 TCDE Terminate Char Detect Enable, 0=disabled
- *
- * 0101 1100
- */
- write_reg(info, CHA + RFC, 0x5c);
-
- /* RLCR Receive length check register
- *
- * Max frame length = (RL + 1) * 32
- */
- write_reg(info, CHA + RLCR, 0);
-
- /* XBCH Transmit Byte Count High
- *
- * 07 DMA mode, 0 = interrupt driven
- * 06 NRM, 0=ABM (ignored)
- * 05 CAS Carrier Auto Start
- * 04 XC Transmit Continuously (ignored)
- * 03..00 XBC[10..8] Transmit byte count bits 10..8
- *
- * 0000 0000
- */
- val = 0x00;
- if (info->params.flags & HDLC_FLAG_AUTO_DCD)
- val |= BIT5;
- write_reg(info, CHA + XBCH, val);
- if (info->params.flags & HDLC_FLAG_AUTO_CTS)
- irq_enable(info, CHA, IRQ_CTS);
-
- /* MODE:03 RAC Receiver Active, 1=active */
- set_reg_bits(info, CHA + MODE, BIT3);
- enable_auxclk(info);
- if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
- irq_enable(info, CHB, IRQ_CTS);
- /* PVR[3] 1=AUTO CTS active */
- set_reg_bits(info, CHA + PVR, BIT3);
- } else
- clear_reg_bits(info, CHA + PVR, BIT3);
- irq_enable(info, CHA,
- IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME |
- IRQ_ALLSENT | IRQ_TXFIFO);
- issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
- wait_command_complete(info, CHA);
- read_reg16(info, CHA + ISR); /* clear pending IRQs */
-}
-
-/* Set the HDLC idle mode for the transmitter.
- */
-static void tx_set_idle(MGSLPC_INFO *info)
-{
- /* Note: ESCC2 only supports flags and one idle modes */
- if (info->idle_mode == HDLC_TXIDLE_FLAGS)
- set_reg_bits(info, CHA + CCR1, BIT3);
- else
- clear_reg_bits(info, CHA + CCR1, BIT3);
-}
-
-/* get state of the V24 status (input) signals.
- */
-static void get_signals(MGSLPC_INFO *info)
-{
- unsigned char status = 0;
-
- /* preserve RTS and DTR */
- info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
-
- if (read_reg(info, CHB + VSTR) & BIT7)
- info->serial_signals |= SerialSignal_DCD;
- if (read_reg(info, CHB + STAR) & BIT1)
- info->serial_signals |= SerialSignal_CTS;
-
- status = read_reg(info, CHA + PVR);
- if (!(status & PVR_RI))
- info->serial_signals |= SerialSignal_RI;
- if (!(status & PVR_DSR))
- info->serial_signals |= SerialSignal_DSR;
-}
-
-/* Set the state of RTS and DTR based on contents of
- * serial_signals member of device extension.
- */
-static void set_signals(MGSLPC_INFO *info)
-{
- unsigned char val;
-
- val = read_reg(info, CHA + MODE);
- if (info->params.mode == MGSL_MODE_ASYNC) {
- if (info->serial_signals & SerialSignal_RTS)
- val &= ~BIT6;
- else
- val |= BIT6;
- } else {
- if (info->serial_signals & SerialSignal_RTS)
- val |= BIT2;
- else
- val &= ~BIT2;
- }
- write_reg(info, CHA + MODE, val);
-
- if (info->serial_signals & SerialSignal_DTR)
- clear_reg_bits(info, CHA + PVR, PVR_DTR);
- else
- set_reg_bits(info, CHA + PVR, PVR_DTR);
-}
-
-static void rx_reset_buffers(MGSLPC_INFO *info)
-{
- RXBUF *buf;
- int i;
-
- info->rx_put = 0;
- info->rx_get = 0;
- info->rx_frame_count = 0;
- for (i=0 ; i < info->rx_buf_count ; i++) {
- buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
- buf->status = buf->count = 0;
- }
-}
-
-/* Attempt to return a received HDLC frame
- * Only frames received without errors are returned.
- *
- * Returns true if frame returned, otherwise false
- */
-static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
-{
- unsigned short status;
- RXBUF *buf;
- unsigned int framesize = 0;
- unsigned long flags;
- bool return_frame = false;
-
- if (info->rx_frame_count == 0)
- return false;
-
- buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
-
- status = buf->status;
-
- /* 07 VFR 1=valid frame
- * 06 RDO 1=data overrun
- * 05 CRC 1=OK, 0=error
- * 04 RAB 1=frame aborted
- */
- if ((status & 0xf0) != 0xA0) {
- if (!(status & BIT7) || (status & BIT4))
- info->icount.rxabort++;
- else if (status & BIT6)
- info->icount.rxover++;
- else if (!(status & BIT5)) {
- info->icount.rxcrc++;
- if (info->params.crc_type & HDLC_CRC_RETURN_EX)
- return_frame = true;
- }
- framesize = 0;
-#if SYNCLINK_GENERIC_HDLC
- {
- info->netdev->stats.rx_errors++;
- info->netdev->stats.rx_frame_errors++;
- }
-#endif
- } else
- return_frame = true;
-
- if (return_frame)
- framesize = buf->count;
-
- if (debug_level >= DEBUG_LEVEL_BH)
- printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
- __FILE__, __LINE__, info->device_name, status, framesize);
-
- if (debug_level >= DEBUG_LEVEL_DATA)
- trace_block(info, buf->data, framesize, 0);
-
- if (framesize) {
- if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
- framesize+1 > info->max_frame_size) ||
- framesize > info->max_frame_size)
- info->icount.rxlong++;
- else {
- if (status & BIT5)
- info->icount.rxok++;
-
- if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
- *(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
- ++framesize;
- }
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_rx(info, buf->data, framesize);
- else
-#endif
- ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
- }
- }
-
- spin_lock_irqsave(&info->lock, flags);
- buf->status = buf->count = 0;
- info->rx_frame_count--;
- info->rx_get++;
- if (info->rx_get >= info->rx_buf_count)
- info->rx_get = 0;
- spin_unlock_irqrestore(&info->lock, flags);
-
- return true;
-}
-
-static bool register_test(MGSLPC_INFO *info)
-{
- static unsigned char patterns[] =
- { 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
- static unsigned int count = ARRAY_SIZE(patterns);
- unsigned int i;
- bool rc = true;
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- reset_device(info);
-
- for (i = 0; i < count; i++) {
- write_reg(info, XAD1, patterns[i]);
- write_reg(info, XAD2, patterns[(i + 1) % count]);
- if ((read_reg(info, XAD1) != patterns[i]) ||
- (read_reg(info, XAD2) != patterns[(i + 1) % count])) {
- rc = false;
- break;
- }
- }
-
- spin_unlock_irqrestore(&info->lock, flags);
- return rc;
-}
-
-static bool irq_test(MGSLPC_INFO *info)
-{
- unsigned long end_time;
- unsigned long flags;
-
- spin_lock_irqsave(&info->lock, flags);
- reset_device(info);
-
- info->testing_irq = true;
- hdlc_mode(info);
-
- info->irq_occurred = false;
-
- /* init hdlc mode */
-
- irq_enable(info, CHA, IRQ_TIMER);
- write_reg(info, CHA + TIMR, 0); /* 512 cycles */
- issue_command(info, CHA, CMD_START_TIMER);
-
- spin_unlock_irqrestore(&info->lock, flags);
-
- end_time=100;
- while(end_time-- && !info->irq_occurred) {
- msleep_interruptible(10);
- }
-
- info->testing_irq = false;
-
- spin_lock_irqsave(&info->lock, flags);
- reset_device(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- return info->irq_occurred;
-}
-
-static int adapter_test(MGSLPC_INFO *info)
-{
- if (!register_test(info)) {
- info->init_error = DiagStatus_AddressFailure;
- printk("%s(%d):Register test failure for device %s Addr=%04X\n",
- __FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base));
- return -ENODEV;
- }
-
- if (!irq_test(info)) {
- info->init_error = DiagStatus_IrqFailure;
- printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n",
- __FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level));
- return -ENODEV;
- }
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):device %s passed diagnostics\n",
- __FILE__, __LINE__, info->device_name);
- return 0;
-}
-
-static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
-{
- int i;
- int linecount;
- if (xmit)
- printk("%s tx data:\n", info->device_name);
- else
- printk("%s rx data:\n", info->device_name);
-
- while(count) {
- if (count > 16)
- linecount = 16;
- else
- linecount = count;
-
- for(i=0;i<linecount;i++)
- printk("%02X ", (unsigned char)data[i]);
- for(;i<17;i++)
- printk(" ");
- for(i=0;i<linecount;i++) {
- if (data[i]>=040 && data[i]<=0176)
- printk("%c", data[i]);
- else
- printk(".");
- }
- printk("\n");
-
- data += linecount;
- count -= linecount;
- }
-}
-
-/* HDLC frame time out
- * update stats and do tx completion processing
- */
-static void tx_timeout(struct timer_list *t)
-{
- MGSLPC_INFO *info = from_timer(info, t, tx_timer);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s(%d):tx_timeout(%s)\n",
- __FILE__, __LINE__, info->device_name);
- if (info->tx_active &&
- info->params.mode == MGSL_MODE_HDLC) {
- info->icount.txtimeout++;
- }
- spin_lock_irqsave(&info->lock, flags);
- info->tx_active = false;
- info->tx_count = info->tx_put = info->tx_get = 0;
-
- spin_unlock_irqrestore(&info->lock, flags);
-
-#if SYNCLINK_GENERIC_HDLC
- if (info->netcount)
- hdlcdev_tx_done(info);
- else
-#endif
- {
- struct tty_struct *tty = tty_port_tty_get(&info->port);
- bh_transmit(info, tty);
- tty_kref_put(tty);
- }
-}
-
-#if SYNCLINK_GENERIC_HDLC
-
-/*
- * called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
- * set encoding and frame check sequence (FCS) options
- *
- * dev pointer to network device structure
- * encoding serial encoding setting
- * parity FCS setting
- *
- * returns 0 if success, otherwise error code
- */
-static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
- unsigned short parity)
-{
- MGSLPC_INFO *info = dev_to_port(dev);
- struct tty_struct *tty;
- unsigned char new_encoding;
- unsigned short new_crctype;
-
- /* return error if TTY interface open */
- if (info->port.count)
- return -EBUSY;
-
- switch (encoding)
- {
- case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
- case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
- case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
- case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
- case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
- default: return -EINVAL;
- }
-
- switch (parity)
- {
- case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
- case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
- case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
- default: return -EINVAL;
- }
-
- info->params.encoding = new_encoding;
- info->params.crc_type = new_crctype;
-
- /* if network interface up, reprogram hardware */
- if (info->netcount) {
- tty = tty_port_tty_get(&info->port);
- mgslpc_program_hw(info, tty);
- tty_kref_put(tty);
- }
-
- return 0;
-}
-
-/*
- * called by generic HDLC layer to send frame
- *
- * skb socket buffer containing HDLC frame
- * dev pointer to network device structure
- */
-static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
- struct net_device *dev)
-{
- MGSLPC_INFO *info = dev_to_port(dev);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name);
-
- /* stop sending until this frame completes */
- netif_stop_queue(dev);
-
- /* copy data to device buffers */
- skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
- info->tx_get = 0;
- info->tx_put = info->tx_count = skb->len;
-
- /* update network statistics */
- dev->stats.tx_packets++;
- dev->stats.tx_bytes += skb->len;
-
- /* done with socket buffer, so free it */
- dev_kfree_skb(skb);
-
- /* save start time for transmit timeout detection */
- netif_trans_update(dev);
-
- /* start hardware transmitter if necessary */
- spin_lock_irqsave(&info->lock, flags);
- if (!info->tx_active) {
- struct tty_struct *tty = tty_port_tty_get(&info->port);
- tx_start(info, tty);
- tty_kref_put(tty);
- }
- spin_unlock_irqrestore(&info->lock, flags);
-
- return NETDEV_TX_OK;
-}
-
-/*
- * called by network layer when interface enabled
- * claim resources and initialize hardware
- *
- * dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
- */
-static int hdlcdev_open(struct net_device *dev)
-{
- MGSLPC_INFO *info = dev_to_port(dev);
- struct tty_struct *tty;
- int rc;
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name);
-
- /* generic HDLC layer open processing */
- rc = hdlc_open(dev);
- if (rc != 0)
- return rc;
-
- /* arbitrate between network and tty opens */
- spin_lock_irqsave(&info->netlock, flags);
- if (info->port.count != 0 || info->netcount != 0) {
- printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
- spin_unlock_irqrestore(&info->netlock, flags);
- return -EBUSY;
- }
- info->netcount=1;
- spin_unlock_irqrestore(&info->netlock, flags);
-
- tty = tty_port_tty_get(&info->port);
- /* claim resources and init adapter */
- rc = startup(info, tty);
- if (rc != 0) {
- tty_kref_put(tty);
- spin_lock_irqsave(&info->netlock, flags);
- info->netcount=0;
- spin_unlock_irqrestore(&info->netlock, flags);
- return rc;
- }
- /* assert RTS and DTR, apply hardware settings */
- info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
- mgslpc_program_hw(info, tty);
- tty_kref_put(tty);
-
- /* enable network layer transmit */
- netif_trans_update(dev);
- netif_start_queue(dev);
-
- /* inform generic HDLC layer of current DCD status */
- spin_lock_irqsave(&info->lock, flags);
- get_signals(info);
- spin_unlock_irqrestore(&info->lock, flags);
- if (info->serial_signals & SerialSignal_DCD)
- netif_carrier_on(dev);
- else
- netif_carrier_off(dev);
- return 0;
-}
-
-/*
- * called by network layer when interface is disabled
- * shutdown hardware and release resources
- *
- * dev pointer to network device structure
- *
- * returns 0 if success, otherwise error code
- */
-static int hdlcdev_close(struct net_device *dev)
-{
- MGSLPC_INFO *info = dev_to_port(dev);
- struct tty_struct *tty = tty_port_tty_get(&info->port);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name);
-
- netif_stop_queue(dev);
-
- /* shutdown adapter and release resources */
- shutdown(info, tty);
- tty_kref_put(tty);
- hdlc_close(dev);
-
- spin_lock_irqsave(&info->netlock, flags);
- info->netcount=0;
- spin_unlock_irqrestore(&info->netlock, flags);
-
- return 0;
-}
-
-/*
- * called by network layer to process IOCTL call to network device
- *
- * dev pointer to network device structure
- * ifs pointer to network interface settings structure
- *
- * returns 0 if success, otherwise error code
- */
-static int hdlcdev_wan_ioctl(struct net_device *dev, struct if_settings *ifs)
-{
- const size_t size = sizeof(sync_serial_settings);
- sync_serial_settings new_line;
- sync_serial_settings __user *line = ifs->ifs_ifsu.sync;
- MGSLPC_INFO *info = dev_to_port(dev);
- unsigned int flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name);
-
- /* return error if TTY interface open */
- if (info->port.count)
- return -EBUSY;
-
- memset(&new_line, 0, size);
-
- switch (ifs->type) {
- case IF_GET_IFACE: /* return current sync_serial_settings */
-
- ifs->type = IF_IFACE_SYNC_SERIAL;
- if (ifs->size < size) {
- ifs->size = size; /* data size wanted */
- return -ENOBUFS;
- }
-
- flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
-
- switch (flags){
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
- case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
- case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
- default: new_line.clock_type = CLOCK_DEFAULT;
- }
-
- new_line.clock_rate = info->params.clock_speed;
- new_line.loopback = info->params.loopback ? 1:0;
-
- if (copy_to_user(line, &new_line, size))
- return -EFAULT;
- return 0;
-
- case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
-
- if(!capable(CAP_NET_ADMIN))
- return -EPERM;
- if (copy_from_user(&new_line, line, size))
- return -EFAULT;
-
- switch (new_line.clock_type)
- {
- case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
- case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
- case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
- case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
- case CLOCK_DEFAULT: flags = info->params.flags &
- (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
- default: return -EINVAL;
- }
-
- if (new_line.loopback != 0 && new_line.loopback != 1)
- return -EINVAL;
-
- info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
- HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
- HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
- HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
- info->params.flags |= flags;
-
- info->params.loopback = new_line.loopback;
-
- if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
- info->params.clock_speed = new_line.clock_rate;
- else
- info->params.clock_speed = 0;
-
- /* if network interface up, reprogram hardware */
- if (info->netcount) {
- struct tty_struct *tty = tty_port_tty_get(&info->port);
- mgslpc_program_hw(info, tty);
- tty_kref_put(tty);
- }
- return 0;
- default:
- return hdlc_ioctl(dev, ifs);
- }
-}
-
-/*
- * called by network layer when transmit timeout is detected
- *
- * dev pointer to network device structure
- */
-static void hdlcdev_tx_timeout(struct net_device *dev, unsigned int txqueue)
-{
- MGSLPC_INFO *info = dev_to_port(dev);
- unsigned long flags;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("hdlcdev_tx_timeout(%s)\n", dev->name);
-
- dev->stats.tx_errors++;
- dev->stats.tx_aborted_errors++;
-
- spin_lock_irqsave(&info->lock, flags);
- tx_stop(info);
- spin_unlock_irqrestore(&info->lock, flags);
-
- netif_wake_queue(dev);
-}
-
-/*
- * called by device driver when transmit completes
- * reenable network layer transmit if stopped
- *
- * info pointer to device instance information
- */
-static void hdlcdev_tx_done(MGSLPC_INFO *info)
-{
- if (netif_queue_stopped(info->netdev))
- netif_wake_queue(info->netdev);
-}
-
-/*
- * called by device driver when frame received
- * pass frame to network layer
- *
- * info pointer to device instance information
- * buf pointer to buffer contianing frame data
- * size count of data bytes in buf
- */
-static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
-{
- struct sk_buff *skb = dev_alloc_skb(size);
- struct net_device *dev = info->netdev;
-
- if (debug_level >= DEBUG_LEVEL_INFO)
- printk("hdlcdev_rx(%s)\n", dev->name);
-
- if (skb == NULL) {
- printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
- dev->stats.rx_dropped++;
- return;
- }
-
- skb_put_data(skb, buf, size);
-
- skb->protocol = hdlc_type_trans(skb, dev);
-
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += size;
-
- netif_rx(skb);
-}
-
-static const struct net_device_ops hdlcdev_ops = {
- .ndo_open = hdlcdev_open,
- .ndo_stop = hdlcdev_close,
- .ndo_start_xmit = hdlc_start_xmit,
- .ndo_siocwandev = hdlcdev_wan_ioctl,
- .ndo_tx_timeout = hdlcdev_tx_timeout,
-};
-
-/*
- * called by device driver when adding device instance
- * do generic HDLC initialization
- *
- * info pointer to device instance information
- *
- * returns 0 if success, otherwise error code
- */
-static int hdlcdev_init(MGSLPC_INFO *info)
-{
- int rc;
- struct net_device *dev;
- hdlc_device *hdlc;
-
- /* allocate and initialize network and HDLC layer objects */
-
- dev = alloc_hdlcdev(info);
- if (dev == NULL) {
- printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__);
- return -ENOMEM;
- }
-
- /* for network layer reporting purposes only */
- dev->base_addr = info->io_base;
- dev->irq = info->irq_level;
-
- /* network layer callbacks and settings */
- dev->netdev_ops = &hdlcdev_ops;
- dev->watchdog_timeo = 10 * HZ;
- dev->tx_queue_len = 50;
-
- /* generic HDLC layer callbacks and settings */
- hdlc = dev_to_hdlc(dev);
- hdlc->attach = hdlcdev_attach;
- hdlc->xmit = hdlcdev_xmit;
-
- /* register objects with HDLC layer */
- rc = register_hdlc_device(dev);
- if (rc) {
- printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__);
- free_netdev(dev);
- return rc;
- }
-
- info->netdev = dev;
- return 0;
-}
-
-/*
- * called by device driver when removing device instance
- * do generic HDLC cleanup
- *
- * info pointer to device instance information
- */
-static void hdlcdev_exit(MGSLPC_INFO *info)
-{
- unregister_hdlc_device(info->netdev);
- free_netdev(info->netdev);
- info->netdev = NULL;
-}
-
-#endif /* CONFIG_HDLC */
-
diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c
index ed5aff0a4204..03708ab64e56 100644
--- a/drivers/firmware/dmi-sysfs.c
+++ b/drivers/firmware/dmi-sysfs.c
@@ -304,7 +304,7 @@ static struct attribute *dmi_sysfs_sel_attrs[] = {
};
ATTRIBUTE_GROUPS(dmi_sysfs_sel);
-static struct kobj_type dmi_system_event_log_ktype = {
+static const struct kobj_type dmi_system_event_log_ktype = {
.release = dmi_entry_free,
.sysfs_ops = &dmi_sysfs_specialize_attr_ops,
.default_groups = dmi_sysfs_sel_groups,
@@ -563,7 +563,7 @@ static void dmi_sysfs_entry_release(struct kobject *kobj)
kfree(entry);
}
-static struct kobj_type dmi_sysfs_entry_ktype = {
+static const struct kobj_type dmi_sysfs_entry_ktype = {
.release = dmi_sysfs_entry_release,
.sysfs_ops = &dmi_sysfs_attr_ops,
.default_groups = dmi_sysfs_entry_groups,
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 5cc238916551..55dec4eb2c00 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -608,7 +608,7 @@ static void edd_release(struct kobject * kobj)
kfree(dev);
}
-static struct kobj_type edd_ktype = {
+static const struct kobj_type edd_ktype = {
.release = edd_release,
.sysfs_ops = &edd_attr_ops,
};
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index bde1f543f529..80f4e2d14e04 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -1133,8 +1133,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev)
return ret;
genpool = svc_create_memory_pool(pdev, sh_memory);
- if (!genpool)
- return -ENOMEM;
+ if (IS_ERR(genpool))
+ return PTR_ERR(genpool);
/* allocate service controller and supporting channel */
controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL);
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index ce86a1850305..a736db4a5825 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -972,6 +972,39 @@ int zynqmp_pm_fpga_get_status(u32 *value)
EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_status);
/**
+ * zynqmp_pm_fpga_get_config_status - Get the FPGA configuration status.
+ * @value: Buffer to store FPGA configuration status.
+ *
+ * This function provides access to the pmufw to get the FPGA configuration
+ * status
+ *
+ * Return: 0 on success, a negative value on error
+ */
+int zynqmp_pm_fpga_get_config_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ u32 buf, lower_addr, upper_addr;
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ lower_addr = lower_32_bits((u64)&buf);
+ upper_addr = upper_32_bits((u64)&buf);
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_READ,
+ XILINX_ZYNQMP_PM_FPGA_CONFIG_STAT_OFFSET,
+ lower_addr, upper_addr,
+ XILINX_ZYNQMP_PM_FPGA_READ_CONFIG_REG,
+ ret_payload);
+
+ *value = ret_payload[1];
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_fpga_get_config_status);
+
+/**
* zynqmp_pm_pinctrl_request - Request Pin from firmware
* @pin: Pin number to request
*
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
index c41b3f2360a8..a6c25dee9cc1 100644
--- a/drivers/fpga/fpga-bridge.c
+++ b/drivers/fpga/fpga-bridge.c
@@ -115,7 +115,7 @@ static int fpga_bridge_dev_match(struct device *dev, const void *data)
/**
* fpga_bridge_get - get an exclusive reference to an fpga bridge
* @dev: parent device that fpga bridge was registered with
- * @info: fpga manager info
+ * @info: fpga image specific information
*
* Given a device, get an exclusive reference to an fpga bridge.
*
diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
index c60f20949c47..f3434e2c487b 100644
--- a/drivers/fpga/zynqmp-fpga.c
+++ b/drivers/fpga/zynqmp-fpga.c
@@ -77,6 +77,26 @@ static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager *mgr)
return FPGA_MGR_STATE_UNKNOWN;
}
+static ssize_t status_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ u32 status;
+ int ret;
+
+ ret = zynqmp_pm_fpga_get_config_status(&status);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "0x%x\n", status);
+}
+static DEVICE_ATTR_RO(status);
+
+static struct attribute *zynqmp_fpga_attrs[] = {
+ &dev_attr_status.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(zynqmp_fpga);
+
static const struct fpga_manager_ops zynqmp_fpga_ops = {
.state = zynqmp_fpga_ops_state,
.write_init = zynqmp_fpga_ops_write_init,
@@ -113,6 +133,7 @@ static struct platform_driver zynqmp_fpga_driver = {
.driver = {
.name = "zynqmp_fpga_manager",
.of_match_table = of_match_ptr(zynqmp_fpga_of_match),
+ .dev_groups = zynqmp_fpga_groups,
},
};
diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c
index 7900a4707d7c..295382cd09b0 100644
--- a/drivers/gpu/drm/drm_mipi_dsi.c
+++ b/drivers/gpu/drm/drm_mipi_dsi.c
@@ -160,7 +160,7 @@ of_mipi_dsi_device_add(struct mipi_dsi_host *host, struct device_node *node)
int ret;
u32 reg;
- if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+ if (of_alias_from_compatible(node, info.type, sizeof(info.type)) < 0) {
drm_err(host, "modalias failure on %pOF\n", node);
return ERR_PTR(-EINVAL);
}
diff --git a/drivers/hsi/hsi_core.c b/drivers/hsi/hsi_core.c
index 8fda8f1d064d..acbf82f755a8 100644
--- a/drivers/hsi/hsi_core.c
+++ b/drivers/hsi/hsi_core.c
@@ -207,7 +207,7 @@ static void hsi_add_client_from_dt(struct hsi_port *port,
if (!cl)
return;
- err = of_modalias_node(client, name, sizeof(name));
+ err = of_alias_from_compatible(client, name, sizeof(name));
if (err)
goto err;
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index a48c97da8165..711f451b6946 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -901,6 +901,7 @@ int __init etm_perf_init(void)
etm_pmu.addr_filters_sync = etm_addr_filters_sync;
etm_pmu.addr_filters_validate = etm_addr_filters_validate;
etm_pmu.nr_addr_filters = ETM_ADDR_CMP_MAX;
+ etm_pmu.module = THIS_MODULE;
ret = perf_pmu_register(&etm_pmu, CORESIGHT_ETM_PMU_NAME, -1);
if (ret == 0)
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 2e74747eec9c..ec706a3aba26 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -284,7 +284,7 @@ static bool i2c_powermac_get_type(struct i2c_adapter *adap,
*/
/* First try proper modalias */
- if (of_modalias_node(node, tmp, sizeof(tmp)) >= 0) {
+ if (of_alias_from_compatible(node, tmp, sizeof(tmp)) >= 0) {
snprintf(type, type_size, "MAC,%s", tmp);
return true;
}
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index 5c1376386897..a6c407d36800 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -27,7 +27,7 @@ int of_i2c_get_board_info(struct device *dev, struct device_node *node,
memset(info, 0, sizeof(*info));
- if (of_modalias_node(node, info->type, sizeof(info->type)) < 0) {
+ if (of_alias_from_compatible(node, info->type, sizeof(info->type)) < 0) {
dev_err(dev, "of_i2c: modalias failure on %pOF\n", node);
return -EINVAL;
}
diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig
index b190846c3dc2..52eb46ef84c1 100644
--- a/drivers/iio/Kconfig
+++ b/drivers/iio/Kconfig
@@ -30,6 +30,9 @@ config IIO_CONFIGFS
(e.g. software triggers). For more info see
Documentation/iio/iio_configfs.rst.
+config IIO_GTS_HELPER
+ tristate
+
config IIO_TRIGGER
bool "Enable triggered sampling support"
help
diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile
index 3be08cdadd7e..9622347a1c1b 100644
--- a/drivers/iio/Makefile
+++ b/drivers/iio/Makefile
@@ -9,6 +9,7 @@ industrialio-$(CONFIG_IIO_BUFFER) += industrialio-buffer.o
industrialio-$(CONFIG_IIO_TRIGGER) += industrialio-trigger.o
obj-$(CONFIG_IIO_CONFIGFS) += industrialio-configfs.o
+obj-$(CONFIG_IIO_GTS_HELPER) += industrialio-gts-helper.o
obj-$(CONFIG_IIO_SW_DEVICE) += industrialio-sw-device.o
obj-$(CONFIG_IIO_SW_TRIGGER) += industrialio-sw-trigger.o
obj-$(CONFIG_IIO_TRIGGERED_EVENT) += industrialio-triggered-event.o
diff --git a/drivers/iio/accel/bma400_core.c b/drivers/iio/accel/bma400_core.c
index 623f37cbaf50..a68b845f5b4f 100644
--- a/drivers/iio/accel/bma400_core.c
+++ b/drivers/iio/accel/bma400_core.c
@@ -1688,7 +1688,7 @@ static irqreturn_t bma400_interrupt(int irq, void *private)
if (FIELD_GET(BMA400_INT_DRDY_MSK, le16_to_cpu(data->status))) {
mutex_unlock(&data->mutex);
- iio_trigger_poll_chained(data->trig);
+ iio_trigger_poll_nested(data->trig);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/accel/kionix-kx022a.c b/drivers/iio/accel/kionix-kx022a.c
index 1c3a72380fb8..f98393d74666 100644
--- a/drivers/iio/accel/kionix-kx022a.c
+++ b/drivers/iio/accel/kionix-kx022a.c
@@ -162,7 +162,6 @@ struct kx022a_data {
int inc_reg;
int ien_reg;
- unsigned int g_range;
unsigned int state;
unsigned int odr_ns;
@@ -900,7 +899,7 @@ static irqreturn_t kx022a_irq_thread_handler(int irq, void *private)
mutex_lock(&data->mutex);
if (data->trigger_enabled) {
- iio_trigger_poll_chained(data->trig);
+ iio_trigger_poll_nested(data->trig);
ret = IRQ_HANDLED;
}
diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c
index f97fb68e3a71..ea14e3aaa30a 100644
--- a/drivers/iio/accel/mma8452.c
+++ b/drivers/iio/accel/mma8452.c
@@ -1067,7 +1067,7 @@ static irqreturn_t mma8452_interrupt(int irq, void *p)
return IRQ_NONE;
if (src & MMA8452_INT_DRDY) {
- iio_trigger_poll_chained(indio_dev->trig);
+ iio_trigger_poll_nested(indio_dev->trig);
ret = IRQ_HANDLED;
}
diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c
index af94d3adf6d8..6690fa37da8f 100644
--- a/drivers/iio/accel/msa311.c
+++ b/drivers/iio/accel/msa311.c
@@ -951,7 +951,7 @@ static irqreturn_t msa311_irq_thread(int irq, void *p)
}
if (new_data_int_enabled)
- iio_trigger_poll_chained(msa311->new_data_trig);
+ iio_trigger_poll_nested(msa311->new_data_trig);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/accel/st_accel.h b/drivers/iio/accel/st_accel.h
index 56ed0c776d4a..e7525615712b 100644
--- a/drivers/iio/accel/st_accel.h
+++ b/drivers/iio/accel/st_accel.h
@@ -39,6 +39,7 @@
#define LIS302DL_ACCEL_DEV_NAME "lis302dl"
#define LSM303C_ACCEL_DEV_NAME "lsm303c_accel"
#define SC7A20_ACCEL_DEV_NAME "sc7a20"
+#define IIS328DQ_ACCEL_DEV_NAME "iis328dq"
#ifdef CONFIG_IIO_BUFFER
diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c
index 6b8562f684d5..5f7d81b44b1d 100644
--- a/drivers/iio/accel/st_accel_core.c
+++ b/drivers/iio/accel/st_accel_core.c
@@ -517,6 +517,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
.sensors_supported = {
[0] = H3LIS331DL_ACCEL_DEV_NAME,
+ [1] = IIS328DQ_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
diff --git a/drivers/iio/accel/st_accel_i2c.c b/drivers/iio/accel/st_accel_i2c.c
index 3f02fd5d5946..fb9e2d6f4210 100644
--- a/drivers/iio/accel/st_accel_i2c.c
+++ b/drivers/iio/accel/st_accel_i2c.c
@@ -119,6 +119,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "silan,sc7a20",
.data = SC7A20_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,iis328dq",
+ .data = IIS328DQ_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -157,6 +161,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LIS302DL_ACCEL_DEV_NAME },
{ LSM303C_ACCEL_DEV_NAME },
{ SC7A20_ACCEL_DEV_NAME },
+ { IIS328DQ_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
diff --git a/drivers/iio/accel/st_accel_spi.c b/drivers/iio/accel/st_accel_spi.c
index 5740dc1820bd..f72a24f45322 100644
--- a/drivers/iio/accel/st_accel_spi.c
+++ b/drivers/iio/accel/st_accel_spi.c
@@ -100,6 +100,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lsm303c-accel",
.data = LSM303C_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,iis328dq",
+ .data = IIS328DQ_ACCEL_DEV_NAME,
+ },
{}
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -157,6 +161,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LIS3DE_ACCEL_DEV_NAME },
{ LIS302DL_ACCEL_DEV_NAME },
{ LSM303C_ACCEL_DEV_NAME },
+ { IIS328DQ_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 45af2302be53..eb2b09ef5d5b 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -1229,6 +1229,16 @@ config TI_ADS7924
This driver can also be built as a module. If so, the module will be
called ti-ads7924.
+config TI_ADS1100
+ tristate "Texas Instruments ADS1100 and ADS1000 ADC"
+ depends on I2C
+ help
+ If you say yes here you get support for Texas Instruments ADS1100 and
+ ADS1000 ADC chips.
+
+ This driver can also be built as a module. If so, the module will be
+ called ti-ads1100.
+
config TI_ADS7950
tristate "Texas Instruments ADS7950 ADC driver"
depends on SPI && GPIOLIB
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 36c18177322a..e07e4a3e6237 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_TI_ADC108S102) += ti-adc108s102.o
obj-$(CONFIG_TI_ADC128S052) += ti-adc128s052.o
obj-$(CONFIG_TI_ADC161S626) += ti-adc161s626.o
obj-$(CONFIG_TI_ADS1015) += ti-ads1015.o
+obj-$(CONFIG_TI_ADS1100) += ti-ads1100.o
obj-$(CONFIG_TI_ADS7924) += ti-ads7924.o
obj-$(CONFIG_TI_ADS7950) += ti-ads7950.o
obj-$(CONFIG_TI_ADS8344) += ti-ads8344.o
diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index dd6b603f65ea..1928d9ae5bcf 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -477,7 +477,7 @@ static irqreturn_t ad7606_interrupt(int irq, void *dev_id)
if (iio_buffer_enabled(indio_dev)) {
gpiod_set_value(st->gpio_convst, 0);
- iio_trigger_poll_chained(st->trig);
+ iio_trigger_poll_nested(st->trig);
} else {
complete(&st->completion);
}
diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c
index 7258912fe17b..df67b63ccf69 100644
--- a/drivers/iio/adc/at91-sama5d2_adc.c
+++ b/drivers/iio/adc/at91-sama5d2_adc.c
@@ -1194,7 +1194,7 @@ static void at91_dma_buffer_done(void *data)
{
struct iio_dev *indio_dev = data;
- iio_trigger_poll_chained(indio_dev->trig);
+ iio_trigger_poll_nested(indio_dev->trig);
}
static int at91_adc_dma_start(struct iio_dev *indio_dev)
@@ -2400,12 +2400,8 @@ static int at91_adc_probe(struct platform_device *pdev)
st->dma_st.phys_addr = res->start;
st->irq = platform_get_irq(pdev, 0);
- if (st->irq <= 0) {
- if (!st->irq)
- st->irq = -ENXIO;
-
+ if (st->irq < 0)
return st->irq;
- }
st->per_clk = devm_clk_get(&pdev->dev, "adc_clk");
if (IS_ERR(st->per_clk))
diff --git a/drivers/iio/adc/axp20x_adc.c b/drivers/iio/adc/axp20x_adc.c
index 53bf7d4899d2..75bda94dbce1 100644
--- a/drivers/iio/adc/axp20x_adc.c
+++ b/drivers/iio/adc/axp20x_adc.c
@@ -5,6 +5,7 @@
* Quentin Schulz <quentin.schulz@free-electrons.com>
*/
+#include <linux/bitfield.h>
#include <linux/completion.h>
#include <linux/interrupt.h>
#include <linux/io.h>
@@ -22,20 +23,20 @@
#include <linux/mfd/axp20x.h>
#define AXP20X_ADC_EN1_MASK GENMASK(7, 0)
-
#define AXP20X_ADC_EN2_MASK (GENMASK(3, 2) | BIT(7))
+
#define AXP22X_ADC_EN1_MASK (GENMASK(7, 5) | BIT(0))
#define AXP20X_GPIO10_IN_RANGE_GPIO0 BIT(0)
#define AXP20X_GPIO10_IN_RANGE_GPIO1 BIT(1)
-#define AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(x) ((x) & BIT(0))
-#define AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(x) (((x) & BIT(0)) << 1)
#define AXP20X_ADC_RATE_MASK GENMASK(7, 6)
-#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
-#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
#define AXP20X_ADC_RATE_HZ(x) ((ilog2((x) / 25) << 6) & AXP20X_ADC_RATE_MASK)
+
#define AXP22X_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 6) & AXP20X_ADC_RATE_MASK)
+
+#define AXP813_V_I_ADC_RATE_MASK GENMASK(5, 4)
+#define AXP813_ADC_RATE_MASK (AXP20X_ADC_RATE_MASK | AXP813_V_I_ADC_RATE_MASK)
#define AXP813_TS_GPIO0_ADC_RATE_HZ(x) AXP20X_ADC_RATE_HZ(x)
#define AXP813_V_I_ADC_RATE_HZ(x) ((ilog2((x) / 100) << 4) & AXP813_V_I_ADC_RATE_MASK)
#define AXP813_ADC_RATE_HZ(x) (AXP20X_ADC_RATE_HZ(x) | AXP813_V_I_ADC_RATE_HZ(x))
@@ -234,7 +235,7 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
- int size = 12;
+ int ret, size;
/*
* N.B.: Unlike the Chinese datasheets tell, the charging current is
@@ -246,10 +247,11 @@ static int axp20x_adc_raw(struct iio_dev *indio_dev,
else
size = 12;
- *val = axp20x_read_variable_width(info->regmap, chan->address, size);
- if (*val < 0)
- return *val;
+ ret = axp20x_read_variable_width(info->regmap, chan->address, size);
+ if (ret < 0)
+ return ret;
+ *val = ret;
return IIO_VAL_INT;
}
@@ -257,11 +259,13 @@ static int axp22x_adc_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ int ret;
- *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
- if (*val < 0)
- return *val;
+ ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+ if (ret < 0)
+ return ret;
+ *val = ret;
return IIO_VAL_INT;
}
@@ -269,11 +273,13 @@ static int axp813_adc_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ int ret;
- *val = axp20x_read_variable_width(info->regmap, chan->address, 12);
- if (*val < 0)
- return *val;
+ ret = axp20x_read_variable_width(info->regmap, chan->address, 12);
+ if (ret < 0)
+ return ret;
+ *val = ret;
return IIO_VAL_INT;
}
@@ -443,27 +449,27 @@ static int axp20x_adc_offset_voltage(struct iio_dev *indio_dev, int channel,
int *val)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
+ unsigned int regval;
int ret;
- ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, val);
+ ret = regmap_read(info->regmap, AXP20X_GPIO10_IN_RANGE, &regval);
if (ret < 0)
return ret;
switch (channel) {
case AXP20X_GPIO0_V:
- *val &= AXP20X_GPIO10_IN_RANGE_GPIO0;
+ regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO0, regval);
break;
case AXP20X_GPIO1_V:
- *val &= AXP20X_GPIO10_IN_RANGE_GPIO1;
+ regval = FIELD_GET(AXP20X_GPIO10_IN_RANGE_GPIO1, regval);
break;
default:
return -EINVAL;
}
- *val = *val ? 700000 : 0;
-
+ *val = regval ? 700000 : 0;
return IIO_VAL_INT;
}
@@ -548,7 +554,7 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
long mask)
{
struct axp20x_adc_iio *info = iio_priv(indio_dev);
- unsigned int reg, regval;
+ unsigned int regmask, regval;
/*
* The AXP20X PMIC allows the user to choose between 0V and 0.7V offsets
@@ -560,25 +566,22 @@ static int axp20x_write_raw(struct iio_dev *indio_dev,
if (val != 0 && val != 700000)
return -EINVAL;
- val = val ? 1 : 0;
-
switch (chan->channel) {
case AXP20X_GPIO0_V:
- reg = AXP20X_GPIO10_IN_RANGE_GPIO0;
- regval = AXP20X_GPIO10_IN_RANGE_GPIO0_VAL(val);
+ regmask = AXP20X_GPIO10_IN_RANGE_GPIO0;
+ regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO0, !!val);
break;
case AXP20X_GPIO1_V:
- reg = AXP20X_GPIO10_IN_RANGE_GPIO1;
- regval = AXP20X_GPIO10_IN_RANGE_GPIO1_VAL(val);
+ regmask = AXP20X_GPIO10_IN_RANGE_GPIO1;
+ regval = FIELD_PREP(AXP20X_GPIO10_IN_RANGE_GPIO1, !!val);
break;
default:
return -EINVAL;
}
- return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, reg,
- regval);
+ return regmap_update_bits(info->regmap, AXP20X_GPIO10_IN_RANGE, regmask, regval);
}
static const struct iio_info axp20x_adc_iio_info = {
@@ -620,9 +623,9 @@ struct axp_data {
int num_channels;
struct iio_chan_spec const *channels;
unsigned long adc_en1_mask;
+ unsigned long adc_en2_mask;
int (*adc_rate)(struct axp20x_adc_iio *info,
int rate);
- bool adc_en2;
struct iio_map *maps;
};
@@ -631,8 +634,8 @@ static const struct axp_data axp20x_data = {
.num_channels = ARRAY_SIZE(axp20x_adc_channels),
.channels = axp20x_adc_channels,
.adc_en1_mask = AXP20X_ADC_EN1_MASK,
+ .adc_en2_mask = AXP20X_ADC_EN2_MASK,
.adc_rate = axp20x_adc_rate,
- .adc_en2 = true,
.maps = axp20x_maps,
};
@@ -642,7 +645,6 @@ static const struct axp_data axp22x_data = {
.channels = axp22x_adc_channels,
.adc_en1_mask = AXP22X_ADC_EN1_MASK,
.adc_rate = axp22x_adc_rate,
- .adc_en2 = false,
.maps = axp22x_maps,
};
@@ -652,7 +654,6 @@ static const struct axp_data axp813_data = {
.channels = axp813_adc_channels,
.adc_en1_mask = AXP22X_ADC_EN1_MASK,
.adc_rate = axp813_adc_rate,
- .adc_en2 = false,
.maps = axp22x_maps,
};
@@ -710,10 +711,10 @@ static int axp20x_probe(struct platform_device *pdev)
/* Enable the ADCs on IP */
regmap_write(info->regmap, AXP20X_ADC_EN1, info->data->adc_en1_mask);
- if (info->data->adc_en2)
- /* Enable GPIO0/1 and internal temperature ADCs */
+ if (info->data->adc_en2_mask)
regmap_update_bits(info->regmap, AXP20X_ADC_EN2,
- AXP20X_ADC_EN2_MASK, AXP20X_ADC_EN2_MASK);
+ info->data->adc_en2_mask,
+ info->data->adc_en2_mask);
/* Configure ADCs rate */
info->data->adc_rate(info, 100);
@@ -738,7 +739,7 @@ fail_register:
fail_map:
regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
- if (info->data->adc_en2)
+ if (info->data->adc_en2_mask)
regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
return ret;
@@ -754,7 +755,7 @@ static int axp20x_remove(struct platform_device *pdev)
regmap_write(info->regmap, AXP20X_ADC_EN1, 0);
- if (info->data->adc_en2)
+ if (info->data->adc_en2_mask)
regmap_write(info->regmap, AXP20X_ADC_EN2, 0);
return 0;
diff --git a/drivers/iio/adc/max11410.c b/drivers/iio/adc/max11410.c
index f6895bc9fc4b..6af829349b4e 100644
--- a/drivers/iio/adc/max11410.c
+++ b/drivers/iio/adc/max11410.c
@@ -682,7 +682,7 @@ static irqreturn_t max11410_interrupt(int irq, void *dev_id)
struct max11410_state *st = iio_priv(indio_dev);
if (iio_buffer_enabled(indio_dev))
- iio_trigger_poll_chained(st->trig);
+ iio_trigger_poll_nested(st->trig);
else
complete(&st->completion);
diff --git a/drivers/iio/adc/meson_saradc.c b/drivers/iio/adc/meson_saradc.c
index 85b6826cc10c..18937a262af6 100644
--- a/drivers/iio/adc/meson_saradc.c
+++ b/drivers/iio/adc/meson_saradc.c
@@ -957,14 +957,18 @@ err_lock:
return ret;
}
-static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
+static void meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
{
struct meson_sar_adc_priv *priv = iio_priv(indio_dev);
int ret;
+ /*
+ * If taking the lock fails we have to assume that BL30 is broken. The
+ * best we can do then is to release the resources anyhow.
+ */
ret = meson_sar_adc_lock(indio_dev);
if (ret)
- return ret;
+ dev_err(indio_dev->dev.parent, "Failed to lock ADC (%pE)\n", ERR_PTR(ret));
clk_disable_unprepare(priv->adc_clk);
@@ -977,9 +981,8 @@ static int meson_sar_adc_hw_disable(struct iio_dev *indio_dev)
regulator_disable(priv->vref);
- meson_sar_adc_unlock(indio_dev);
-
- return 0;
+ if (!ret)
+ meson_sar_adc_unlock(indio_dev);
}
static irqreturn_t meson_sar_adc_irq(int irq, void *data)
@@ -1283,14 +1286,18 @@ static int meson_sar_adc_remove(struct platform_device *pdev)
iio_device_unregister(indio_dev);
- return meson_sar_adc_hw_disable(indio_dev);
+ meson_sar_adc_hw_disable(indio_dev);
+
+ return 0;
}
static int meson_sar_adc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
- return meson_sar_adc_hw_disable(indio_dev);
+ meson_sar_adc_hw_disable(indio_dev);
+
+ return 0;
}
static int meson_sar_adc_resume(struct device *dev)
diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c
index 849a697a467e..c1c439215aeb 100644
--- a/drivers/iio/adc/palmas_gpadc.c
+++ b/drivers/iio/adc/palmas_gpadc.c
@@ -20,6 +20,7 @@
#include <linux/completion.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/iio/events.h>
#include <linux/iio/iio.h>
#include <linux/iio/machine.h>
#include <linux/iio/driver.h>
@@ -76,6 +77,17 @@ static struct palmas_gpadc_info palmas_gpadc_info[] = {
PALMAS_ADC_INFO(IN15, 0, 0, 0, 0, INVALID, INVALID, true),
};
+struct palmas_adc_event {
+ bool enabled;
+ int channel;
+ enum iio_event_direction direction;
+};
+
+struct palmas_gpadc_thresholds {
+ int high;
+ int low;
+};
+
/*
* struct palmas_gpadc - the palmas_gpadc structure
* @ch0_current: channel 0 current source setting
@@ -111,14 +123,33 @@ struct palmas_gpadc {
int irq_auto_1;
struct palmas_gpadc_info *adc_info;
struct completion conv_completion;
- struct palmas_adc_wakeup_property wakeup1_data;
- struct palmas_adc_wakeup_property wakeup2_data;
- bool wakeup1_enable;
- bool wakeup2_enable;
+ struct palmas_adc_event event0;
+ struct palmas_adc_event event1;
+ struct palmas_gpadc_thresholds thresholds[PALMAS_ADC_CH_MAX];
int auto_conversion_period;
struct mutex lock;
};
+static struct palmas_adc_event *palmas_gpadc_get_event(struct palmas_gpadc *adc,
+ int adc_chan,
+ enum iio_event_direction dir)
+{
+ if (adc_chan == adc->event0.channel && dir == adc->event0.direction)
+ return &adc->event0;
+
+ if (adc_chan == adc->event1.channel && dir == adc->event1.direction)
+ return &adc->event1;
+
+ return NULL;
+}
+
+static bool palmas_gpadc_channel_is_freerunning(struct palmas_gpadc *adc,
+ int adc_chan)
+{
+ return palmas_gpadc_get_event(adc, adc_chan, IIO_EV_DIR_RISING) ||
+ palmas_gpadc_get_event(adc, adc_chan, IIO_EV_DIR_FALLING);
+}
+
/*
* GPADC lock issue in AUTO mode.
* Impact: In AUTO mode, GPADC conversion can be locked after disabling AUTO
@@ -188,11 +219,24 @@ static irqreturn_t palmas_gpadc_irq(int irq, void *data)
static irqreturn_t palmas_gpadc_irq_auto(int irq, void *data)
{
- struct palmas_gpadc *adc = data;
+ struct iio_dev *indio_dev = data;
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ struct palmas_adc_event *ev;
dev_dbg(adc->dev, "Threshold interrupt %d occurs\n", irq);
palmas_disable_auto_conversion(adc);
+ ev = (irq == adc->irq_auto_0) ? &adc->event0 : &adc->event1;
+ if (ev->channel != -1) {
+ enum iio_event_direction dir;
+ u64 code;
+
+ dir = ev->direction;
+ code = IIO_UNMOD_EVENT_CODE(IIO_VOLTAGE, ev->channel,
+ IIO_EV_TYPE_THRESH, dir);
+ iio_push_event(indio_dev, code, iio_get_time_ns(indio_dev));
+ }
+
return IRQ_HANDLED;
}
@@ -280,6 +324,9 @@ static int palmas_gpadc_read_prepare(struct palmas_gpadc *adc, int adc_chan)
{
int ret;
+ if (palmas_gpadc_channel_is_freerunning(adc, adc_chan))
+ return 0; /* ADC already running */
+
ret = palmas_gpadc_enable(adc, adc_chan, true);
if (ret < 0)
return ret;
@@ -339,28 +386,43 @@ static int palmas_gpadc_start_conversion(struct palmas_gpadc *adc, int adc_chan)
unsigned int val;
int ret;
- init_completion(&adc->conv_completion);
- ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
- PALMAS_GPADC_SW_SELECT,
- PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
- PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
- if (ret < 0) {
- dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret);
- return ret;
- }
+ if (palmas_gpadc_channel_is_freerunning(adc, adc_chan)) {
+ int event = (adc_chan == adc->event0.channel) ? 0 : 1;
+ unsigned int reg = (event == 0) ?
+ PALMAS_GPADC_AUTO_CONV0_LSB :
+ PALMAS_GPADC_AUTO_CONV1_LSB;
- ret = wait_for_completion_timeout(&adc->conv_completion,
- PALMAS_ADC_CONVERSION_TIMEOUT);
- if (ret == 0) {
- dev_err(adc->dev, "conversion not completed\n");
- return -ETIMEDOUT;
- }
+ ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
+ reg, &val, 2);
+ if (ret < 0) {
+ dev_err(adc->dev, "AUTO_CONV%x_LSB read failed: %d\n",
+ event, ret);
+ return ret;
+ }
+ } else {
+ init_completion(&adc->conv_completion);
+ ret = palmas_update_bits(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_SELECT,
+ PALMAS_GPADC_SW_SELECT_SW_START_CONV0,
+ PALMAS_GPADC_SW_SELECT_SW_START_CONV0);
+ if (ret < 0) {
+ dev_err(adc->dev, "SELECT_SW_START write failed: %d\n", ret);
+ return ret;
+ }
- ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
- PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
- if (ret < 0) {
- dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret);
- return ret;
+ ret = wait_for_completion_timeout(&adc->conv_completion,
+ PALMAS_ADC_CONVERSION_TIMEOUT);
+ if (ret == 0) {
+ dev_err(adc->dev, "conversion not completed\n");
+ return -ETIMEDOUT;
+ }
+
+ ret = palmas_bulk_read(adc->palmas, PALMAS_GPADC_BASE,
+ PALMAS_GPADC_SW_CONV0_LSB, &val, 2);
+ if (ret < 0) {
+ dev_err(adc->dev, "SW_CONV0_LSB read failed: %d\n", ret);
+ return ret;
+ }
}
ret = val & 0xFFF;
@@ -386,6 +448,98 @@ static int palmas_gpadc_get_calibrated_code(struct palmas_gpadc *adc,
return val;
}
+/*
+ * The high and low threshold values are calculated based on the advice given
+ * in TI Application Report SLIA087A, "Guide to Using the GPADC in PS65903x,
+ * TPS65917-Q1, TPS65919-Q1, and TPS65916 Devices". This document recommend
+ * taking ADC tolerances into account and is based on the device integral non-
+ * linearity (INL), offset error and gain error:
+ *
+ * raw high threshold = (ideal threshold + INL) * gain error + offset error
+ *
+ * The gain error include both gain error, as specified in the datasheet, and
+ * the gain error drift. These paramenters vary depending on device and whether
+ * the the channel is calibrated (trimmed) or not.
+ */
+static int palmas_gpadc_threshold_with_tolerance(int val, const int INL,
+ const int gain_error,
+ const int offset_error)
+{
+ val = ((val + INL) * (1000 + gain_error)) / 1000 + offset_error;
+
+ return clamp(val, 0, 0xFFF);
+}
+
+/*
+ * The values below are taken from the datasheet of TWL6035, TWL6037.
+ * todo: get max INL, gain error, and offset error from OF.
+ */
+static int palmas_gpadc_get_high_threshold_raw(struct palmas_gpadc *adc,
+ struct palmas_adc_event *ev)
+{
+ const int adc_chan = ev->channel;
+ int val = adc->thresholds[adc_chan].high;
+ /* integral nonlinearity, measured in LSB */
+ const int max_INL = 2;
+ /* measured in LSB */
+ int max_offset_error;
+ /* 0.2% when calibrated */
+ int max_gain_error = 2;
+
+ val = (val * 1000) / adc->adc_info[adc_chan].gain;
+
+ if (adc->adc_info[adc_chan].is_uncalibrated) {
+ /* 2% worse */
+ max_gain_error += 20;
+ max_offset_error = 36;
+ } else {
+ val = (val * adc->adc_info[adc_chan].gain_error +
+ adc->adc_info[adc_chan].offset) /
+ 1000;
+ max_offset_error = 2;
+ }
+
+ return palmas_gpadc_threshold_with_tolerance(val,
+ max_INL,
+ max_gain_error,
+ max_offset_error);
+}
+
+/*
+ * The values below are taken from the datasheet of TWL6035, TWL6037.
+ * todo: get min INL, gain error, and offset error from OF.
+ */
+static int palmas_gpadc_get_low_threshold_raw(struct palmas_gpadc *adc,
+ struct palmas_adc_event *ev)
+{
+ const int adc_chan = ev->channel;
+ int val = adc->thresholds[adc_chan].low;
+ /* integral nonlinearity, measured in LSB */
+ const int min_INL = -2;
+ /* measured in LSB */
+ int min_offset_error;
+ /* -0.6% when calibrated */
+ int min_gain_error = -6;
+
+ val = (val * 1000) / adc->adc_info[adc_chan].gain;
+
+ if (adc->adc_info[adc_chan].is_uncalibrated) {
+ /* 2% worse */
+ min_gain_error -= 20;
+ min_offset_error = -36;
+ } else {
+ val = (val * adc->adc_info[adc_chan].gain_error -
+ adc->adc_info[adc_chan].offset) /
+ 1000;
+ min_offset_error = -2;
+ }
+
+ return palmas_gpadc_threshold_with_tolerance(val,
+ min_INL,
+ min_gain_error,
+ min_offset_error);
+}
+
static int palmas_gpadc_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
@@ -432,8 +586,217 @@ out:
return ret;
}
+static int palmas_gpadc_read_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir)
+{
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int adc_chan = chan->channel;
+ int ret = 0;
+
+ if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ mutex_lock(&adc->lock);
+
+ if (palmas_gpadc_get_event(adc, adc_chan, dir))
+ ret = 1;
+
+ mutex_unlock(&adc->lock);
+
+ return ret;
+}
+
+static int palmas_adc_configure_events(struct palmas_gpadc *adc);
+static int palmas_adc_reset_events(struct palmas_gpadc *adc);
+
+static int palmas_gpadc_reconfigure_event_channels(struct palmas_gpadc *adc)
+{
+ return (adc->event0.enabled || adc->event1.enabled) ?
+ palmas_adc_configure_events(adc) :
+ palmas_adc_reset_events(adc);
+}
+
+static int palmas_gpadc_enable_event_config(struct palmas_gpadc *adc,
+ const struct iio_chan_spec *chan,
+ enum iio_event_direction dir)
+{
+ struct palmas_adc_event *ev;
+ int adc_chan = chan->channel;
+
+ if (palmas_gpadc_get_event(adc, adc_chan, dir))
+ /* already enabled */
+ return 0;
+
+ if (adc->event0.channel == -1) {
+ ev = &adc->event0;
+ } else if (adc->event1.channel == -1) {
+ /* event0 has to be the lowest channel */
+ if (adc_chan < adc->event0.channel) {
+ adc->event1 = adc->event0;
+ ev = &adc->event0;
+ } else {
+ ev = &adc->event1;
+ }
+ } else { /* both AUTO channels already in use */
+ dev_warn(adc->dev, "event0 - %d, event1 - %d\n",
+ adc->event0.channel, adc->event1.channel);
+ return -EBUSY;
+ }
+
+ ev->enabled = true;
+ ev->channel = adc_chan;
+ ev->direction = dir;
+
+ return palmas_gpadc_reconfigure_event_channels(adc);
+}
+
+static int palmas_gpadc_disable_event_config(struct palmas_gpadc *adc,
+ const struct iio_chan_spec *chan,
+ enum iio_event_direction dir)
+{
+ int adc_chan = chan->channel;
+ struct palmas_adc_event *ev = palmas_gpadc_get_event(adc, adc_chan, dir);
+
+ if (!ev)
+ return 0;
+
+ if (ev == &adc->event0) {
+ adc->event0 = adc->event1;
+ ev = &adc->event1;
+ }
+
+ ev->enabled = false;
+ ev->channel = -1;
+ ev->direction = IIO_EV_DIR_NONE;
+
+ return palmas_gpadc_reconfigure_event_channels(adc);
+}
+
+static int palmas_gpadc_write_event_config(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ int state)
+{
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int adc_chan = chan->channel;
+ int ret;
+
+ if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ mutex_lock(&adc->lock);
+
+ if (state)
+ ret = palmas_gpadc_enable_event_config(adc, chan, dir);
+ else
+ ret = palmas_gpadc_disable_event_config(adc, chan, dir);
+
+ mutex_unlock(&adc->lock);
+
+ return ret;
+}
+
+static int palmas_gpadc_read_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int *val, int *val2)
+{
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int adc_chan = chan->channel;
+ int ret;
+
+ if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ mutex_lock(&adc->lock);
+
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ *val = (dir == IIO_EV_DIR_RISING) ?
+ adc->thresholds[adc_chan].high :
+ adc->thresholds[adc_chan].low;
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ mutex_unlock(&adc->lock);
+
+ return ret;
+}
+
+static int palmas_gpadc_write_event_value(struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan,
+ enum iio_event_type type,
+ enum iio_event_direction dir,
+ enum iio_event_info info,
+ int val, int val2)
+{
+ struct palmas_gpadc *adc = iio_priv(indio_dev);
+ int adc_chan = chan->channel;
+ int old;
+ int ret;
+
+ if (adc_chan > PALMAS_ADC_CH_MAX || type != IIO_EV_TYPE_THRESH)
+ return -EINVAL;
+
+ mutex_lock(&adc->lock);
+ switch (info) {
+ case IIO_EV_INFO_VALUE:
+ if (val < 0 || val > 0xFFF) {
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+ if (dir == IIO_EV_DIR_RISING) {
+ old = adc->thresholds[adc_chan].high;
+ adc->thresholds[adc_chan].high = val;
+ } else {
+ old = adc->thresholds[adc_chan].low;
+ adc->thresholds[adc_chan].low = val;
+ }
+ ret = 0;
+ break;
+ default:
+ ret = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (val != old && palmas_gpadc_get_event(adc, adc_chan, dir))
+ ret = palmas_gpadc_reconfigure_event_channels(adc);
+
+out_unlock:
+ mutex_unlock(&adc->lock);
+
+ return ret;
+}
+
static const struct iio_info palmas_gpadc_iio_info = {
.read_raw = palmas_gpadc_read_raw,
+ .read_event_config = palmas_gpadc_read_event_config,
+ .write_event_config = palmas_gpadc_write_event_config,
+ .read_event_value = palmas_gpadc_read_event_value,
+ .write_event_value = palmas_gpadc_write_event_value,
+};
+
+static const struct iio_event_spec palmas_gpadc_events[] = {
+ {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_RISING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ }, {
+ .type = IIO_EV_TYPE_THRESH,
+ .dir = IIO_EV_DIR_FALLING,
+ .mask_separate = BIT(IIO_EV_INFO_VALUE) |
+ BIT(IIO_EV_INFO_ENABLE),
+ },
};
#define PALMAS_ADC_CHAN_IIO(chan, _type, chan_info) \
@@ -444,6 +807,8 @@ static const struct iio_info palmas_gpadc_iio_info = {
BIT(chan_info), \
.indexed = 1, \
.channel = PALMAS_ADC_CH_##chan, \
+ .event_spec = palmas_gpadc_events, \
+ .num_event_specs = ARRAY_SIZE(palmas_gpadc_events) \
}
static const struct iio_chan_spec palmas_gpadc_iio_channel[] = {
@@ -493,6 +858,13 @@ static int palmas_gpadc_get_adc_dt_data(struct platform_device *pdev,
return 0;
}
+static void palmas_gpadc_reset(void *data)
+{
+ struct palmas_gpadc *adc = data;
+ if (adc->event0.enabled || adc->event1.enabled)
+ palmas_adc_reset_events(adc);
+}
+
static int palmas_gpadc_probe(struct platform_device *pdev)
{
struct palmas_gpadc *adc;
@@ -532,53 +904,49 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
adc->auto_conversion_period = gpadc_pdata->auto_conversion_period_ms;
adc->irq = palmas_irq_get_virq(adc->palmas, PALMAS_GPADC_EOC_SW_IRQ);
- if (adc->irq < 0) {
- dev_err(adc->dev,
- "get virq failed: %d\n", adc->irq);
- ret = adc->irq;
- goto out;
- }
- ret = request_threaded_irq(adc->irq, NULL,
- palmas_gpadc_irq,
- IRQF_ONESHOT, dev_name(adc->dev),
- adc);
- if (ret < 0) {
- dev_err(adc->dev,
- "request irq %d failed: %d\n", adc->irq, ret);
- goto out;
- }
+ if (adc->irq < 0)
+ return dev_err_probe(adc->dev, adc->irq, "get virq failed\n");
- if (gpadc_pdata->adc_wakeup1_data) {
- memcpy(&adc->wakeup1_data, gpadc_pdata->adc_wakeup1_data,
- sizeof(adc->wakeup1_data));
- adc->wakeup1_enable = true;
- adc->irq_auto_0 = platform_get_irq(pdev, 1);
- ret = request_threaded_irq(adc->irq_auto_0, NULL,
- palmas_gpadc_irq_auto,
- IRQF_ONESHOT,
- "palmas-adc-auto-0", adc);
- if (ret < 0) {
- dev_err(adc->dev, "request auto0 irq %d failed: %d\n",
- adc->irq_auto_0, ret);
- goto out_irq_free;
- }
- }
+ ret = devm_request_threaded_irq(&pdev->dev, adc->irq, NULL,
+ palmas_gpadc_irq,
+ IRQF_ONESHOT, dev_name(adc->dev),
+ adc);
+ if (ret < 0)
+ return dev_err_probe(adc->dev, ret,
+ "request irq %d failed\n", adc->irq);
- if (gpadc_pdata->adc_wakeup2_data) {
- memcpy(&adc->wakeup2_data, gpadc_pdata->adc_wakeup2_data,
- sizeof(adc->wakeup2_data));
- adc->wakeup2_enable = true;
- adc->irq_auto_1 = platform_get_irq(pdev, 2);
- ret = request_threaded_irq(adc->irq_auto_1, NULL,
- palmas_gpadc_irq_auto,
- IRQF_ONESHOT,
- "palmas-adc-auto-1", adc);
- if (ret < 0) {
- dev_err(adc->dev, "request auto1 irq %d failed: %d\n",
- adc->irq_auto_1, ret);
- goto out_irq_auto0_free;
- }
- }
+ adc->irq_auto_0 = platform_get_irq(pdev, 1);
+ if (adc->irq_auto_0 < 0)
+ return dev_err_probe(adc->dev, adc->irq_auto_0,
+ "get auto0 irq failed\n");
+
+ ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_0, NULL,
+ palmas_gpadc_irq_auto, IRQF_ONESHOT,
+ "palmas-adc-auto-0", indio_dev);
+ if (ret < 0)
+ return dev_err_probe(adc->dev, ret,
+ "request auto0 irq %d failed\n",
+ adc->irq_auto_0);
+
+ adc->irq_auto_1 = platform_get_irq(pdev, 2);
+ if (adc->irq_auto_1 < 0)
+ return dev_err_probe(adc->dev, adc->irq_auto_1,
+ "get auto1 irq failed\n");
+
+ ret = devm_request_threaded_irq(&pdev->dev, adc->irq_auto_1, NULL,
+ palmas_gpadc_irq_auto, IRQF_ONESHOT,
+ "palmas-adc-auto-1", indio_dev);
+ if (ret < 0)
+ return dev_err_probe(adc->dev, ret,
+ "request auto1 irq %d failed\n",
+ adc->irq_auto_1);
+
+ adc->event0.enabled = false;
+ adc->event0.channel = -1;
+ adc->event0.direction = IIO_EV_DIR_NONE;
+ adc->event1.enabled = false;
+ adc->event1.channel = -1;
+ adc->event1.direction = IIO_EV_DIR_NONE;
/* set the current source 0 (value 0/5/15/20 uA => 0..3) */
if (gpadc_pdata->ch0_current <= 1)
@@ -608,11 +976,10 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
indio_dev->channels = palmas_gpadc_iio_channel;
indio_dev->num_channels = ARRAY_SIZE(palmas_gpadc_iio_channel);
- ret = iio_device_register(indio_dev);
- if (ret < 0) {
- dev_err(adc->dev, "iio_device_register() failed: %d\n", ret);
- goto out_irq_auto1_free;
- }
+ ret = devm_iio_device_register(&pdev->dev, indio_dev);
+ if (ret < 0)
+ return dev_err_probe(adc->dev, ret,
+ "iio_device_register() failed\n");
device_set_wakeup_capable(&pdev->dev, 1);
for (i = 0; i < PALMAS_ADC_CH_MAX; i++) {
@@ -620,41 +987,14 @@ static int palmas_gpadc_probe(struct platform_device *pdev)
palmas_gpadc_calibrate(adc, i);
}
- if (adc->wakeup1_enable || adc->wakeup2_enable)
- device_wakeup_enable(&pdev->dev);
-
- return 0;
-
-out_irq_auto1_free:
- if (gpadc_pdata->adc_wakeup2_data)
- free_irq(adc->irq_auto_1, adc);
-out_irq_auto0_free:
- if (gpadc_pdata->adc_wakeup1_data)
- free_irq(adc->irq_auto_0, adc);
-out_irq_free:
- free_irq(adc->irq, adc);
-out:
- return ret;
-}
-
-static int palmas_gpadc_remove(struct platform_device *pdev)
-{
- struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev);
- struct palmas_gpadc *adc = iio_priv(indio_dev);
-
- if (adc->wakeup1_enable || adc->wakeup2_enable)
- device_wakeup_disable(&pdev->dev);
- iio_device_unregister(indio_dev);
- free_irq(adc->irq, adc);
- if (adc->wakeup1_enable)
- free_irq(adc->irq_auto_0, adc);
- if (adc->wakeup2_enable)
- free_irq(adc->irq_auto_1, adc);
+ ret = devm_add_action(&pdev->dev, palmas_gpadc_reset, adc);
+ if (ret)
+ return ret;
return 0;
}
-static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
+static int palmas_adc_configure_events(struct palmas_gpadc *adc)
{
int adc_period, conv;
int i;
@@ -680,17 +1020,23 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
}
conv = 0;
- if (adc->wakeup1_enable) {
+ if (adc->event0.enabled) {
+ struct palmas_adc_event *ev = &adc->event0;
int polarity;
- ch0 = adc->wakeup1_data.adc_channel_number;
+ ch0 = ev->channel;
conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV0_EN;
- if (adc->wakeup1_data.adc_high_threshold > 0) {
- thres = adc->wakeup1_data.adc_high_threshold;
+ switch (ev->direction) {
+ case IIO_EV_DIR_RISING:
+ thres = palmas_gpadc_get_high_threshold_raw(adc, ev);
polarity = 0;
- } else {
- thres = adc->wakeup1_data.adc_low_threshold;
+ break;
+ case IIO_EV_DIR_FALLING:
+ thres = palmas_gpadc_get_low_threshold_raw(adc, ev);
polarity = PALMAS_GPADC_THRES_CONV0_MSB_THRES_CONV0_POL;
+ break;
+ default:
+ return -EINVAL;
}
ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
@@ -711,17 +1057,23 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
}
}
- if (adc->wakeup2_enable) {
+ if (adc->event1.enabled) {
+ struct palmas_adc_event *ev = &adc->event1;
int polarity;
- ch1 = adc->wakeup2_data.adc_channel_number;
+ ch1 = ev->channel;
conv |= PALMAS_GPADC_AUTO_CTRL_AUTO_CONV1_EN;
- if (adc->wakeup2_data.adc_high_threshold > 0) {
- thres = adc->wakeup2_data.adc_high_threshold;
+ switch (ev->direction) {
+ case IIO_EV_DIR_RISING:
+ thres = palmas_gpadc_get_high_threshold_raw(adc, ev);
polarity = 0;
- } else {
- thres = adc->wakeup2_data.adc_low_threshold;
+ break;
+ case IIO_EV_DIR_FALLING:
+ thres = palmas_gpadc_get_low_threshold_raw(adc, ev);
polarity = PALMAS_GPADC_THRES_CONV1_MSB_THRES_CONV1_POL;
+ break;
+ default:
+ return -EINVAL;
}
ret = palmas_write(adc->palmas, PALMAS_GPADC_BASE,
@@ -759,7 +1111,7 @@ static int palmas_adc_wakeup_configure(struct palmas_gpadc *adc)
return ret;
}
-static int palmas_adc_wakeup_reset(struct palmas_gpadc *adc)
+static int palmas_adc_reset_events(struct palmas_gpadc *adc)
{
int ret;
@@ -781,20 +1133,14 @@ static int palmas_gpadc_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct palmas_gpadc *adc = iio_priv(indio_dev);
- int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
- int ret;
- if (!device_may_wakeup(dev) || !wakeup)
+ if (!device_may_wakeup(dev))
return 0;
- ret = palmas_adc_wakeup_configure(adc);
- if (ret < 0)
- return ret;
-
- if (adc->wakeup1_enable)
+ if (adc->event0.enabled)
enable_irq_wake(adc->irq_auto_0);
- if (adc->wakeup2_enable)
+ if (adc->event1.enabled)
enable_irq_wake(adc->irq_auto_1);
return 0;
@@ -804,20 +1150,14 @@ static int palmas_gpadc_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct palmas_gpadc *adc = iio_priv(indio_dev);
- int wakeup = adc->wakeup1_enable || adc->wakeup2_enable;
- int ret;
- if (!device_may_wakeup(dev) || !wakeup)
+ if (!device_may_wakeup(dev))
return 0;
- ret = palmas_adc_wakeup_reset(adc);
- if (ret < 0)
- return ret;
-
- if (adc->wakeup1_enable)
+ if (adc->event0.enabled)
disable_irq_wake(adc->irq_auto_0);
- if (adc->wakeup2_enable)
+ if (adc->event1.enabled)
disable_irq_wake(adc->irq_auto_1);
return 0;
@@ -834,7 +1174,6 @@ MODULE_DEVICE_TABLE(of, of_palmas_gpadc_match_tbl);
static struct platform_driver palmas_gpadc_driver = {
.probe = palmas_gpadc_probe,
- .remove = palmas_gpadc_remove,
.driver = {
.name = MOD_NAME,
.pm = pm_sleep_ptr(&palmas_pm_ops),
diff --git a/drivers/iio/adc/qcom-pm8xxx-xoadc.c b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
index eb424496ee1d..64a3aeb6261c 100644
--- a/drivers/iio/adc/qcom-pm8xxx-xoadc.c
+++ b/drivers/iio/adc/qcom-pm8xxx-xoadc.c
@@ -758,7 +758,7 @@ static int pm8xxx_xoadc_parse_channel(struct device *dev,
/* Find the right channel setting */
chid = 0;
hwchan = &hw_channels[0];
- while (hwchan && hwchan->datasheet_name) {
+ while (hwchan->datasheet_name) {
if (hwchan->pre_scale_mux == pre_scale_mux &&
hwchan->amux_channel == amux_channel)
break;
diff --git a/drivers/iio/adc/rcar-gyroadc.c b/drivers/iio/adc/rcar-gyroadc.c
index 27d9e147b4b7..b8972f673c9d 100644
--- a/drivers/iio/adc/rcar-gyroadc.c
+++ b/drivers/iio/adc/rcar-gyroadc.c
@@ -283,7 +283,7 @@ static const struct of_device_id rcar_gyroadc_match[] = {
MODULE_DEVICE_TABLE(of, rcar_gyroadc_match);
-static const struct of_device_id rcar_gyroadc_child_match[] = {
+static const struct of_device_id rcar_gyroadc_child_match[] __maybe_unused = {
/* Mode 1 ADCs */
{
.compatible = "fujitsu,mb88101a",
diff --git a/drivers/iio/adc/stm32-adc.c b/drivers/iio/adc/stm32-adc.c
index 45d4e79f8e55..1aadb2ad2cab 100644
--- a/drivers/iio/adc/stm32-adc.c
+++ b/drivers/iio/adc/stm32-adc.c
@@ -2588,7 +2588,7 @@ static const struct stm32_adc_cfg stm32f4_adc_cfg = {
.irq_clear = stm32f4_adc_irq_clear,
};
-const unsigned int stm32_adc_min_ts_h7[] = { 0, 0, 0, 4300, 9000 };
+static const unsigned int stm32_adc_min_ts_h7[] = { 0, 0, 0, 4300, 9000 };
static_assert(ARRAY_SIZE(stm32_adc_min_ts_h7) == STM32_ADC_INT_CH_NB);
static const struct stm32_adc_cfg stm32h7_adc_cfg = {
@@ -2607,7 +2607,7 @@ static const struct stm32_adc_cfg stm32h7_adc_cfg = {
.ts_int_ch = stm32_adc_min_ts_h7,
};
-const unsigned int stm32_adc_min_ts_mp1[] = { 100, 100, 100, 4300, 9800 };
+static const unsigned int stm32_adc_min_ts_mp1[] = { 100, 100, 100, 4300, 9800 };
static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp1) == STM32_ADC_INT_CH_NB);
static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
@@ -2627,7 +2627,7 @@ static const struct stm32_adc_cfg stm32mp1_adc_cfg = {
.ts_int_ch = stm32_adc_min_ts_mp1,
};
-const unsigned int stm32_adc_min_ts_mp13[] = { 100, 0, 0, 4300, 9800 };
+static const unsigned int stm32_adc_min_ts_mp13[] = { 100, 0, 0, 4300, 9800 };
static_assert(ARRAY_SIZE(stm32_adc_min_ts_mp13) == STM32_ADC_INT_CH_NB);
static const struct stm32_adc_cfg stm32mp13_adc_cfg = {
diff --git a/drivers/iio/adc/ti-ads1100.c b/drivers/iio/adc/ti-ads1100.c
new file mode 100644
index 000000000000..6b5aebb82455
--- /dev/null
+++ b/drivers/iio/adc/ti-ads1100.c
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADS1100 - Texas Instruments Analog-to-Digital Converter
+ *
+ * Copyright (c) 2023, Topic Embedded Products
+ *
+ * Datasheet: https://www.ti.com/lit/gpn/ads1100
+ * IIO driver for ADS1100 and ADS1000 ADC 16-bit I2C
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+
+/* The ADS1100 has a single byte config register */
+
+/* Conversion in progress bit */
+#define ADS1100_CFG_ST_BSY BIT(7)
+/* Single conversion bit */
+#define ADS1100_CFG_SC BIT(4)
+/* Data rate */
+#define ADS1100_DR_MASK GENMASK(3, 2)
+/* Gain */
+#define ADS1100_PGA_MASK GENMASK(1, 0)
+
+#define ADS1100_CONTINUOUS 0
+#define ADS1100_SINGLESHOT ADS1100_CFG_SC
+
+#define ADS1100_SLEEP_DELAY_MS 2000
+
+static const int ads1100_data_rate[] = { 128, 32, 16, 8 };
+static const int ads1100_data_rate_bits[] = { 12, 14, 15, 16 };
+
+struct ads1100_data {
+ struct i2c_client *client;
+ struct regulator *reg_vdd;
+ struct mutex lock;
+ int scale_avail[2 * 4]; /* 4 gain settings */
+ u8 config;
+ bool supports_data_rate; /* Only the ADS1100 can select the rate */
+};
+
+static const struct iio_chan_spec ads1100_channel = {
+ .type = IIO_VOLTAGE,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+ .info_mask_shared_by_all =
+ BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .info_mask_shared_by_all_available =
+ BIT(IIO_CHAN_INFO_SCALE) | BIT(IIO_CHAN_INFO_SAMP_FREQ),
+ .scan_type = {
+ .sign = 's',
+ .realbits = 16,
+ .storagebits = 16,
+ .endianness = IIO_CPU,
+ },
+ .datasheet_name = "AIN",
+};
+
+static int ads1100_set_config_bits(struct ads1100_data *data, u8 mask, u8 value)
+{
+ int ret;
+ u8 config = (data->config & ~mask) | (value & mask);
+
+ if (data->config == config)
+ return 0; /* Already done */
+
+ ret = i2c_master_send(data->client, &config, 1);
+ if (ret < 0)
+ return ret;
+
+ data->config = config;
+
+ return 0;
+};
+
+static int ads1100_data_bits(struct ads1100_data *data)
+{
+ return ads1100_data_rate_bits[FIELD_GET(ADS1100_DR_MASK, data->config)];
+}
+
+static int ads1100_get_adc_result(struct ads1100_data *data, int chan, int *val)
+{
+ int ret;
+ __be16 buffer;
+ s16 value;
+
+ if (chan != 0)
+ return -EINVAL;
+
+ ret = pm_runtime_resume_and_get(&data->client->dev);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_master_recv(data->client, (char *)&buffer, sizeof(buffer));
+
+ pm_runtime_mark_last_busy(&data->client->dev);
+ pm_runtime_put_autosuspend(&data->client->dev);
+
+ if (ret < 0) {
+ dev_err(&data->client->dev, "I2C read fail: %d\n", ret);
+ return ret;
+ }
+
+ /* Value is always 16-bit 2's complement */
+ value = be16_to_cpu(buffer);
+
+ /* Shift result to compensate for bit resolution vs. sample rate */
+ value <<= 16 - ads1100_data_bits(data);
+
+ *val = sign_extend32(value, 15);
+
+ return 0;
+}
+
+static int ads1100_set_scale(struct ads1100_data *data, int val, int val2)
+{
+ int microvolts;
+ int gain;
+
+ /* With Vdd between 2.7 and 5V, the scale is always below 1 */
+ if (val)
+ return -EINVAL;
+
+ if (!val2)
+ return -EINVAL;
+
+ microvolts = regulator_get_voltage(data->reg_vdd);
+ /*
+ * val2 is in 'micro' units, n = val2 / 1000000
+ * result must be millivolts, d = microvolts / 1000
+ * the full-scale value is d/n, corresponds to 2^15,
+ * hence the gain = (d / n) >> 15, factoring out the 1000 and moving the
+ * bitshift so everything fits in 32-bits yields this formula.
+ */
+ gain = DIV_ROUND_CLOSEST(microvolts, BIT(15)) * MILLI / val2;
+ if (gain < BIT(0) || gain > BIT(3))
+ return -EINVAL;
+
+ ads1100_set_config_bits(data, ADS1100_PGA_MASK, ffs(gain) - 1);
+
+ return 0;
+}
+
+static int ads1100_set_data_rate(struct ads1100_data *data, int chan, int rate)
+{
+ unsigned int i;
+ unsigned int size;
+
+ size = data->supports_data_rate ? ARRAY_SIZE(ads1100_data_rate) : 1;
+ for (i = 0; i < size; i++) {
+ if (ads1100_data_rate[i] == rate)
+ return ads1100_set_config_bits(data, ADS1100_DR_MASK,
+ FIELD_PREP(ADS1100_DR_MASK, i));
+ }
+
+ return -EINVAL;
+}
+
+static int ads1100_get_vdd_millivolts(struct ads1100_data *data)
+{
+ return regulator_get_voltage(data->reg_vdd) / (MICRO / MILLI);
+}
+
+static void ads1100_calc_scale_avail(struct ads1100_data *data)
+{
+ int millivolts = ads1100_get_vdd_millivolts(data);
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(data->scale_avail) / 2; i++) {
+ data->scale_avail[i * 2 + 0] = millivolts;
+ data->scale_avail[i * 2 + 1] = 15 + i;
+ }
+}
+
+static int ads1100_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long mask)
+{
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ if (chan->type != IIO_VOLTAGE)
+ return -EINVAL;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *type = IIO_VAL_INT;
+ *vals = ads1100_data_rate;
+ if (data->supports_data_rate)
+ *length = ARRAY_SIZE(ads1100_data_rate);
+ else
+ *length = 1;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SCALE:
+ *type = IIO_VAL_FRACTIONAL_LOG2;
+ *vals = data->scale_avail;
+ *length = ARRAY_SIZE(data->scale_avail);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int ads1100_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct ads1100_data *data = iio_priv(indio_dev);
+
+ mutex_lock(&data->lock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ ret = iio_device_claim_direct_mode(indio_dev);
+ if (ret)
+ break;
+
+ ret = ads1100_get_adc_result(data, chan->address, val);
+ if (ret >= 0)
+ ret = IIO_VAL_INT;
+ iio_device_release_direct_mode(indio_dev);
+ break;
+ case IIO_CHAN_INFO_SCALE:
+ /* full-scale is the supply voltage in millivolts */
+ *val = ads1100_get_vdd_millivolts(data);
+ *val2 = 15 + FIELD_GET(ADS1100_PGA_MASK, data->config);
+ ret = IIO_VAL_FRACTIONAL_LOG2;
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = ads1100_data_rate[FIELD_GET(ADS1100_DR_MASK,
+ data->config)];
+ ret = IIO_VAL_INT;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static int ads1100_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val,
+ int val2, long mask)
+{
+ struct ads1100_data *data = iio_priv(indio_dev);
+ int ret;
+
+ mutex_lock(&data->lock);
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = ads1100_set_scale(data, val, val2);
+ break;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = ads1100_set_data_rate(data, chan->address, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ mutex_unlock(&data->lock);
+
+ return ret;
+}
+
+static const struct iio_info ads1100_info = {
+ .read_avail = ads1100_read_avail,
+ .read_raw = ads1100_read_raw,
+ .write_raw = ads1100_write_raw,
+};
+
+static int ads1100_setup(struct ads1100_data *data)
+{
+ int ret;
+ u8 buffer[3];
+
+ /* Setup continuous sampling mode at 8sps */
+ buffer[0] = ADS1100_DR_MASK | ADS1100_CONTINUOUS;
+ ret = i2c_master_send(data->client, buffer, 1);
+ if (ret < 0)
+ return ret;
+
+ ret = i2c_master_recv(data->client, buffer, sizeof(buffer));
+ if (ret < 0)
+ return ret;
+
+ /* Config register returned in third byte, strip away the busy status */
+ data->config = buffer[2] & ~ADS1100_CFG_ST_BSY;
+
+ /* Detect the sample rate capability by checking the DR bits */
+ data->supports_data_rate = FIELD_GET(ADS1100_DR_MASK, buffer[2]) != 0;
+
+ return 0;
+}
+
+static void ads1100_reg_disable(void *reg)
+{
+ regulator_disable(reg);
+}
+
+static void ads1100_disable_continuous(void *data)
+{
+ ads1100_set_config_bits(data, ADS1100_CFG_SC, ADS1100_SINGLESHOT);
+}
+
+static int ads1100_probe(struct i2c_client *client)
+{
+ struct iio_dev *indio_dev;
+ struct ads1100_data *data;
+ struct device *dev = &client->dev;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ dev_set_drvdata(dev, data);
+ data->client = client;
+ mutex_init(&data->lock);
+
+ indio_dev->name = "ads1100";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = &ads1100_channel;
+ indio_dev->num_channels = 1;
+ indio_dev->info = &ads1100_info;
+
+ data->reg_vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(data->reg_vdd))
+ return dev_err_probe(dev, PTR_ERR(data->reg_vdd),
+ "Failed to get vdd regulator\n");
+
+ ret = regulator_enable(data->reg_vdd);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Failed to enable vdd regulator\n");
+
+ ret = devm_add_action_or_reset(dev, ads1100_reg_disable, data->reg_vdd);
+ if (ret)
+ return ret;
+
+ ret = ads1100_setup(data);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to communicate with device\n");
+
+ ret = devm_add_action_or_reset(dev, ads1100_disable_continuous, data);
+ if (ret)
+ return ret;
+
+ ads1100_calc_scale_avail(data);
+
+ pm_runtime_set_autosuspend_delay(dev, ADS1100_SLEEP_DELAY_MS);
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_active(dev);
+ ret = devm_pm_runtime_enable(dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enable pm_runtime\n");
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "Failed to register IIO device\n");
+
+ return 0;
+}
+
+static int ads1100_runtime_suspend(struct device *dev)
+{
+ struct ads1100_data *data = dev_get_drvdata(dev);
+
+ ads1100_set_config_bits(data, ADS1100_CFG_SC, ADS1100_SINGLESHOT);
+ regulator_disable(data->reg_vdd);
+
+ return 0;
+}
+
+static int ads1100_runtime_resume(struct device *dev)
+{
+ struct ads1100_data *data = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regulator_enable(data->reg_vdd);
+ if (ret) {
+ dev_err(&data->client->dev, "Failed to enable Vdd\n");
+ return ret;
+ }
+
+ /*
+ * We'll always change the mode bit in the config register, so there is
+ * no need here to "force" a write to the config register. If the device
+ * has been power-cycled, we'll re-write its config register now.
+ */
+ return ads1100_set_config_bits(data, ADS1100_CFG_SC,
+ ADS1100_CONTINUOUS);
+}
+
+static DEFINE_RUNTIME_DEV_PM_OPS(ads1100_pm_ops,
+ ads1100_runtime_suspend,
+ ads1100_runtime_resume,
+ NULL);
+
+static const struct i2c_device_id ads1100_id[] = {
+ { "ads1100" },
+ { "ads1000" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(i2c, ads1100_id);
+
+static const struct of_device_id ads1100_of_match[] = {
+ {.compatible = "ti,ads1100" },
+ {.compatible = "ti,ads1000" },
+ { }
+};
+
+MODULE_DEVICE_TABLE(of, ads1100_of_match);
+
+static struct i2c_driver ads1100_driver = {
+ .driver = {
+ .name = "ads1100",
+ .of_match_table = ads1100_of_match,
+ .pm = pm_ptr(&ads1100_pm_ops),
+ },
+ .probe_new = ads1100_probe,
+ .id_table = ads1100_id,
+};
+
+module_i2c_driver(ads1100_driver);
+
+MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
+MODULE_DESCRIPTION("Texas Instruments ADS1100 ADC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/addac/Kconfig b/drivers/iio/addac/Kconfig
index 2843fcb70e24..877f9124803c 100644
--- a/drivers/iio/addac/Kconfig
+++ b/drivers/iio/addac/Kconfig
@@ -35,7 +35,9 @@ config STX104
tristate "Apex Embedded Systems STX104 driver"
depends on PC104 && X86
select ISA_BUS_API
+ select REGMAP_MMIO
select GPIOLIB
+ select GPIO_REGMAP
help
Say yes here to build support for the Apex Embedded Systems STX104
integrated analog PC/104 card.
diff --git a/drivers/iio/addac/ad74413r.c b/drivers/iio/addac/ad74413r.c
index f32c8c2fb26d..07e9f6ae16a8 100644
--- a/drivers/iio/addac/ad74413r.c
+++ b/drivers/iio/addac/ad74413r.c
@@ -39,6 +39,7 @@ struct ad74413r_chip_info {
struct ad74413r_channel_config {
u32 func;
+ u32 drive_strength;
bool gpo_comparator;
bool initialized;
};
@@ -99,6 +100,7 @@ struct ad74413r_state {
#define AD74413R_REG_ADC_CONFIG_X(x) (0x05 + (x))
#define AD74413R_ADC_CONFIG_RANGE_MASK GENMASK(7, 5)
#define AD74413R_ADC_CONFIG_REJECTION_MASK GENMASK(4, 3)
+#define AD74413R_ADC_CONFIG_CH_200K_TO_GND BIT(2)
#define AD74413R_ADC_RANGE_10V 0b000
#define AD74413R_ADC_RANGE_2P5V_EXT_POW 0b001
#define AD74413R_ADC_RANGE_2P5V_INT_POW 0b010
@@ -111,6 +113,7 @@ struct ad74413r_state {
#define AD74413R_REG_DIN_CONFIG_X(x) (0x09 + (x))
#define AD74413R_DIN_DEBOUNCE_MASK GENMASK(4, 0)
#define AD74413R_DIN_DEBOUNCE_LEN BIT(5)
+#define AD74413R_DIN_SINK_MASK GENMASK(9, 6)
#define AD74413R_REG_DAC_CODE_X(x) (0x16 + (x))
#define AD74413R_DAC_CODE_MAX GENMASK(12, 0)
@@ -261,6 +264,18 @@ static int ad74413r_set_comp_debounce(struct ad74413r_state *st,
val);
}
+static int ad74413r_set_comp_drive_strength(struct ad74413r_state *st,
+ unsigned int offset,
+ unsigned int strength)
+{
+ strength = min(strength, 1800U);
+
+ return regmap_update_bits(st->regmap, AD74413R_REG_DIN_CONFIG_X(offset),
+ AD74413R_DIN_SINK_MASK,
+ FIELD_PREP(AD74413R_DIN_SINK_MASK, strength / 120));
+}
+
+
static void ad74413r_gpio_set(struct gpio_chip *chip,
unsigned int offset, int val)
{
@@ -424,9 +439,20 @@ static int ad74413r_set_channel_dac_code(struct ad74413r_state *st,
static int ad74413r_set_channel_function(struct ad74413r_state *st,
unsigned int channel, u8 func)
{
- return regmap_update_bits(st->regmap,
+ int ret;
+
+ ret = regmap_update_bits(st->regmap,
AD74413R_REG_CH_FUNC_SETUP_X(channel),
AD74413R_CH_FUNC_SETUP_MASK, func);
+ if (ret)
+ return ret;
+
+ if (func == CH_FUNC_CURRENT_INPUT_LOOP_POWER)
+ ret = regmap_set_bits(st->regmap,
+ AD74413R_REG_ADC_CONFIG_X(channel),
+ AD74413R_ADC_CONFIG_CH_200K_TO_GND);
+
+ return ret;
}
static int ad74413r_set_adc_conv_seq(struct ad74413r_state *st,
@@ -1112,6 +1138,11 @@ static struct iio_chan_spec ad74413r_current_input_channels[] = {
AD74413R_ADC_CURRENT_CHANNEL,
};
+static struct iio_chan_spec ad74413r_current_input_loop_channels[] = {
+ AD74413R_DAC_CHANNEL(IIO_CURRENT, BIT(IIO_CHAN_INFO_SCALE)),
+ AD74413R_ADC_CURRENT_CHANNEL,
+};
+
static struct iio_chan_spec ad74413r_resistance_input_channels[] = {
AD74413R_ADC_CHANNEL(IIO_RESISTANCE, BIT(IIO_CHAN_INFO_PROCESSED)),
};
@@ -1135,7 +1166,7 @@ static const struct ad74413r_channels ad74413r_channels_map[] = {
[CH_FUNC_CURRENT_OUTPUT] = AD74413R_CHANNELS(current_output),
[CH_FUNC_VOLTAGE_INPUT] = AD74413R_CHANNELS(voltage_input),
[CH_FUNC_CURRENT_INPUT_EXT_POWER] = AD74413R_CHANNELS(current_input),
- [CH_FUNC_CURRENT_INPUT_LOOP_POWER] = AD74413R_CHANNELS(current_input),
+ [CH_FUNC_CURRENT_INPUT_LOOP_POWER] = AD74413R_CHANNELS(current_input_loop),
[CH_FUNC_RESISTANCE_INPUT] = AD74413R_CHANNELS(resistance_input),
[CH_FUNC_DIGITAL_INPUT_LOGIC] = AD74413R_CHANNELS(digital_input),
[CH_FUNC_DIGITAL_INPUT_LOOP_POWER] = AD74413R_CHANNELS(digital_input),
@@ -1190,6 +1221,9 @@ static int ad74413r_parse_channel_config(struct iio_dev *indio_dev,
config->gpo_comparator = fwnode_property_read_bool(channel_node,
"adi,gpo-comparator");
+ fwnode_property_read_u32(channel_node, "drive-strength-microamp",
+ &config->drive_strength);
+
if (!config->gpo_comparator)
st->num_gpo_gpios++;
@@ -1269,6 +1303,7 @@ static int ad74413r_setup_gpios(struct ad74413r_state *st)
unsigned int gpo_gpio_i = 0;
unsigned int i;
u8 gpo_config;
+ u32 strength;
int ret;
for (i = 0; i < AD74413R_CHANNEL_MAX; i++) {
@@ -1285,6 +1320,11 @@ static int ad74413r_setup_gpios(struct ad74413r_state *st)
config->func == CH_FUNC_DIGITAL_INPUT_LOOP_POWER)
st->comp_gpio_offsets[comp_gpio_i++] = i;
+ strength = config->drive_strength;
+ ret = ad74413r_set_comp_drive_strength(st, i, strength);
+ if (ret)
+ return ret;
+
ret = ad74413r_set_gpo_config(st, i, gpo_config);
if (ret)
return ret;
diff --git a/drivers/iio/addac/stx104.c b/drivers/iio/addac/stx104.c
index 48a91a95e597..d1f7ce033b46 100644
--- a/drivers/iio/addac/stx104.c
+++ b/drivers/iio/addac/stx104.c
@@ -3,19 +3,20 @@
* IIO driver for the Apex Embedded Systems STX104
* Copyright (C) 2016 William Breathitt Gray
*/
-#include <linux/bitops.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
#include <linux/device.h>
-#include <linux/errno.h>
-#include <linux/gpio/driver.h>
+#include <linux/err.h>
+#include <linux/gpio/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
#include <linux/isa.h>
#include <linux/kernel.h>
+#include <linux/limits.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
#include <linux/types.h>
#define STX104_OUT_CHAN(chan) { \
@@ -45,101 +46,211 @@ static unsigned int num_stx104;
module_param_hw_array(base, uint, ioport, &num_stx104, 0);
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
-/**
- * struct stx104_reg - device register structure
- * @ssr_ad: Software Strobe Register and ADC Data
- * @achan: ADC Channel
- * @dio: Digital I/O
- * @dac: DAC Channels
- * @cir_asr: Clear Interrupts and ADC Status
- * @acr: ADC Control
- * @pccr_fsh: Pacer Clock Control and FIFO Status MSB
- * @acfg: ADC Configuration
- */
-struct stx104_reg {
- u16 ssr_ad;
- u8 achan;
- u8 dio;
- u16 dac[2];
- u8 cir_asr;
- u8 acr;
- u8 pccr_fsh;
- u8 acfg;
-};
+#define STX104_AIO_BASE 0x0
+#define STX104_SOFTWARE_STROBE STX104_AIO_BASE
+#define STX104_ADC_DATA STX104_AIO_BASE
+#define STX104_ADC_CHANNEL (STX104_AIO_BASE + 0x2)
+#define STX104_DIO_REG (STX104_AIO_BASE + 0x3)
+#define STX104_DAC_BASE (STX104_AIO_BASE + 0x4)
+#define STX104_ADC_STATUS (STX104_AIO_BASE + 0x8)
+#define STX104_ADC_CONTROL (STX104_AIO_BASE + 0x9)
+#define STX104_ADC_CONFIGURATION (STX104_AIO_BASE + 0x11)
+
+#define STX104_AIO_DATA_STRIDE 2
+#define STX104_DAC_OFFSET(_channel) (STX104_DAC_BASE + STX104_AIO_DATA_STRIDE * (_channel))
+
+/* ADC Channel */
+#define STX104_FC GENMASK(3, 0)
+#define STX104_LC GENMASK(7, 4)
+#define STX104_SINGLE_CHANNEL(_channel) \
+ (u8_encode_bits(_channel, STX104_FC) | u8_encode_bits(_channel, STX104_LC))
+
+/* ADC Status */
+#define STX104_SD BIT(5)
+#define STX104_CNV BIT(7)
+#define STX104_DIFFERENTIAL 1
+
+/* ADC Control */
+#define STX104_ALSS GENMASK(1, 0)
+#define STX104_SOFTWARE_TRIGGER u8_encode_bits(0x0, STX104_ALSS)
+
+/* ADC Configuration */
+#define STX104_GAIN GENMASK(1, 0)
+#define STX104_ADBU BIT(2)
+#define STX104_BIPOLAR 0
+#define STX104_GAIN_X1 0
+#define STX104_GAIN_X2 1
+#define STX104_GAIN_X4 2
+#define STX104_GAIN_X8 3
/**
* struct stx104_iio - IIO device private data structure
- * @chan_out_states: channels' output states
- * @reg: I/O address offset for the device registers
+ * @lock: synchronization lock to prevent I/O race conditions
+ * @aio_data_map: Regmap for analog I/O data
+ * @aio_ctl_map: Regmap for analog I/O control
*/
struct stx104_iio {
- unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
- struct stx104_reg __iomem *reg;
+ struct mutex lock;
+ struct regmap *aio_data_map;
+ struct regmap *aio_ctl_map;
};
-/**
- * struct stx104_gpio - GPIO device private data structure
- * @chip: instance of the gpio_chip
- * @lock: synchronization lock to prevent I/O race conditions
- * @base: base port address of the GPIO device
- * @out_state: output bits state
- */
-struct stx104_gpio {
- struct gpio_chip chip;
- spinlock_t lock;
- u8 __iomem *base;
- unsigned int out_state;
+static const struct regmap_range aio_ctl_wr_ranges[] = {
+ regmap_reg_range(0x0, 0x0), regmap_reg_range(0x2, 0x2), regmap_reg_range(0x9, 0x9),
+ regmap_reg_range(0x11, 0x11),
+};
+static const struct regmap_range aio_ctl_rd_ranges[] = {
+ regmap_reg_range(0x2, 0x2), regmap_reg_range(0x8, 0x9), regmap_reg_range(0x11, 0x11),
+};
+static const struct regmap_range aio_ctl_volatile_ranges[] = {
+ regmap_reg_range(0x8, 0x8),
+};
+static const struct regmap_access_table aio_ctl_wr_table = {
+ .yes_ranges = aio_ctl_wr_ranges,
+ .n_yes_ranges = ARRAY_SIZE(aio_ctl_wr_ranges),
+};
+static const struct regmap_access_table aio_ctl_rd_table = {
+ .yes_ranges = aio_ctl_rd_ranges,
+ .n_yes_ranges = ARRAY_SIZE(aio_ctl_rd_ranges),
+};
+static const struct regmap_access_table aio_ctl_volatile_table = {
+ .yes_ranges = aio_ctl_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(aio_ctl_volatile_ranges),
+};
+
+static const struct regmap_config aio_ctl_regmap_config = {
+ .name = "aio_ctl",
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .reg_base = STX104_AIO_BASE,
+ .val_bits = 8,
+ .io_port = true,
+ .wr_table = &aio_ctl_wr_table,
+ .rd_table = &aio_ctl_rd_table,
+ .volatile_table = &aio_ctl_volatile_table,
+ .cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_range aio_data_wr_ranges[] = {
+ regmap_reg_range(0x4, 0x6),
+};
+static const struct regmap_range aio_data_rd_ranges[] = {
+ regmap_reg_range(0x0, 0x0),
+};
+static const struct regmap_access_table aio_data_wr_table = {
+ .yes_ranges = aio_data_wr_ranges,
+ .n_yes_ranges = ARRAY_SIZE(aio_data_wr_ranges),
+};
+static const struct regmap_access_table aio_data_rd_table = {
+ .yes_ranges = aio_data_rd_ranges,
+ .n_yes_ranges = ARRAY_SIZE(aio_data_rd_ranges),
+};
+
+static const struct regmap_config aio_data_regmap_config = {
+ .name = "aio_data",
+ .reg_bits = 16,
+ .reg_stride = STX104_AIO_DATA_STRIDE,
+ .reg_base = STX104_AIO_BASE,
+ .val_bits = 16,
+ .io_port = true,
+ .wr_table = &aio_data_wr_table,
+ .rd_table = &aio_data_rd_table,
+ .volatile_table = &aio_data_rd_table,
+ .cache_type = REGCACHE_FLAT,
+};
+
+static const struct regmap_config dio_regmap_config = {
+ .name = "dio",
+ .reg_bits = 8,
+ .reg_stride = 1,
+ .reg_base = STX104_DIO_REG,
+ .val_bits = 8,
+ .io_port = true,
};
static int stx104_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
- struct stx104_reg __iomem *const reg = priv->reg;
+ int err;
unsigned int adc_config;
- int adbu;
- int gain;
+ unsigned int value;
+ unsigned int adc_status;
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
- /* get gain configuration */
- adc_config = ioread8(&reg->acfg);
- gain = adc_config & 0x3;
+ err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config);
+ if (err)
+ return err;
- *val = 1 << gain;
+ *val = BIT(u8_get_bits(adc_config, STX104_GAIN));
return IIO_VAL_INT;
case IIO_CHAN_INFO_RAW:
if (chan->output) {
- *val = priv->chan_out_states[chan->channel];
+ err = regmap_read(priv->aio_data_map, STX104_DAC_OFFSET(chan->channel),
+ &value);
+ if (err)
+ return err;
+ *val = value;
return IIO_VAL_INT;
}
+ mutex_lock(&priv->lock);
+
/* select ADC channel */
- iowrite8(chan->channel | (chan->channel << 4), &reg->achan);
+ err = regmap_write(priv->aio_ctl_map, STX104_ADC_CHANNEL,
+ STX104_SINGLE_CHANNEL(chan->channel));
+ if (err) {
+ mutex_unlock(&priv->lock);
+ return err;
+ }
- /* trigger ADC sample capture by writing to the 8-bit
- * Software Strobe Register and wait for completion
+ /*
+ * Trigger ADC sample capture by writing to the 8-bit Software Strobe Register and
+ * wait for completion; the conversion time range is 5 microseconds to 53.68 seconds
+ * in steps of 25 nanoseconds. The actual Analog Input Frame Timer time interval is
+ * calculated as:
+ * ai_time_frame_ns = ( AIFT + 1 ) * ( 25 nanoseconds ).
+ * Where 0 <= AIFT <= 2147483648.
*/
- iowrite8(0, &reg->ssr_ad);
- while (ioread8(&reg->cir_asr) & BIT(7));
+ err = regmap_write(priv->aio_ctl_map, STX104_SOFTWARE_STROBE, 0);
+ if (err) {
+ mutex_unlock(&priv->lock);
+ return err;
+ }
+ err = regmap_read_poll_timeout(priv->aio_ctl_map, STX104_ADC_STATUS, adc_status,
+ !u8_get_bits(adc_status, STX104_CNV), 0, 53687092);
+ if (err) {
+ mutex_unlock(&priv->lock);
+ return err;
+ }
+
+ err = regmap_read(priv->aio_data_map, STX104_ADC_DATA, &value);
+ if (err) {
+ mutex_unlock(&priv->lock);
+ return err;
+ }
+ *val = value;
- *val = ioread16(&reg->ssr_ad);
+ mutex_unlock(&priv->lock);
return IIO_VAL_INT;
case IIO_CHAN_INFO_OFFSET:
/* get ADC bipolar/unipolar configuration */
- adc_config = ioread8(&reg->acfg);
- adbu = !(adc_config & BIT(2));
+ err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config);
+ if (err)
+ return err;
- *val = -32768 * adbu;
+ *val = (u8_get_bits(adc_config, STX104_ADBU) == STX104_BIPOLAR) ? -32768 : 0;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/* get ADC bipolar/unipolar and gain configuration */
- adc_config = ioread8(&reg->acfg);
- adbu = !(adc_config & BIT(2));
- gain = adc_config & 0x3;
+ err = regmap_read(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, &adc_config);
+ if (err)
+ return err;
*val = 5;
- *val2 = 15 - adbu + gain;
+ *val2 = (u8_get_bits(adc_config, STX104_ADBU) == STX104_BIPOLAR) ? 14 : 15;
+ *val2 += u8_get_bits(adc_config, STX104_GAIN);
return IIO_VAL_FRACTIONAL_LOG2;
}
@@ -150,40 +261,37 @@ static int stx104_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
struct stx104_iio *const priv = iio_priv(indio_dev);
+ u8 gain;
switch (mask) {
case IIO_CHAN_INFO_HARDWAREGAIN:
/* Only four gain states (x1, x2, x4, x8) */
switch (val) {
case 1:
- iowrite8(0, &priv->reg->acfg);
+ gain = STX104_GAIN_X1;
break;
case 2:
- iowrite8(1, &priv->reg->acfg);
+ gain = STX104_GAIN_X2;
break;
case 4:
- iowrite8(2, &priv->reg->acfg);
+ gain = STX104_GAIN_X4;
break;
case 8:
- iowrite8(3, &priv->reg->acfg);
+ gain = STX104_GAIN_X8;
break;
default:
return -EINVAL;
}
- return 0;
+ return regmap_write(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, gain);
case IIO_CHAN_INFO_RAW:
- if (chan->output) {
- /* DAC can only accept up to a 16-bit value */
- if ((unsigned int)val > 65535)
- return -EINVAL;
+ if (!chan->output)
+ return -EINVAL;
- priv->chan_out_states[chan->channel] = val;
- iowrite16(val, &priv->reg->dac[chan->channel]);
+ if (val < 0 || val > U16_MAX)
+ return -EINVAL;
- return 0;
- }
- return -EINVAL;
+ return regmap_write(priv->aio_data_map, STX104_DAC_OFFSET(chan->channel), val);
}
return -EINVAL;
@@ -212,119 +320,66 @@ static const struct iio_chan_spec stx104_channels_diff[] = {
STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1)
};
-static int stx104_gpio_get_direction(struct gpio_chip *chip,
- unsigned int offset)
-{
- /* GPIO 0-3 are input only, while the rest are output only */
- if (offset < 4)
- return 1;
-
- return 0;
-}
-
-static int stx104_gpio_direction_input(struct gpio_chip *chip,
- unsigned int offset)
+static int stx104_reg_mask_xlate(struct gpio_regmap *const gpio, const unsigned int base,
+ unsigned int offset, unsigned int *const reg,
+ unsigned int *const mask)
{
+ /* Output lines are located at same register bit offsets as input lines */
if (offset >= 4)
- return -EINVAL;
-
- return 0;
-}
+ offset -= 4;
-static int stx104_gpio_direction_output(struct gpio_chip *chip,
- unsigned int offset, int value)
-{
- if (offset < 4)
- return -EINVAL;
+ *reg = base;
+ *mask = BIT(offset);
- chip->set(chip, offset, value);
return 0;
}
-static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
-{
- struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
-
- if (offset >= 4)
- return -EINVAL;
-
- return !!(ioread8(stx104gpio->base) & BIT(offset));
-}
-
-static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
- unsigned long *bits)
-{
- struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
-
- *bits = ioread8(stx104gpio->base);
-
- return 0;
-}
-
-static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
- int value)
-{
- struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
- const unsigned int mask = BIT(offset) >> 4;
- unsigned long flags;
-
- if (offset < 4)
- return;
-
- spin_lock_irqsave(&stx104gpio->lock, flags);
-
- if (value)
- stx104gpio->out_state |= mask;
- else
- stx104gpio->out_state &= ~mask;
-
- iowrite8(stx104gpio->out_state, stx104gpio->base);
-
- spin_unlock_irqrestore(&stx104gpio->lock, flags);
-}
-
#define STX104_NGPIO 8
static const char *stx104_names[STX104_NGPIO] = {
"DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3"
};
-static void stx104_gpio_set_multiple(struct gpio_chip *chip,
- unsigned long *mask, unsigned long *bits)
+static int stx104_init_hw(struct stx104_iio *const priv)
{
- struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
- unsigned long flags;
-
- /* verify masked GPIO are output */
- if (!(*mask & 0xF0))
- return;
+ int err;
- *mask >>= 4;
- *bits >>= 4;
+ /* configure device for software trigger operation */
+ err = regmap_write(priv->aio_ctl_map, STX104_ADC_CONTROL, STX104_SOFTWARE_TRIGGER);
+ if (err)
+ return err;
- spin_lock_irqsave(&stx104gpio->lock, flags);
+ /* initialize gain setting to x1 */
+ err = regmap_write(priv->aio_ctl_map, STX104_ADC_CONFIGURATION, STX104_GAIN_X1);
+ if (err)
+ return err;
- stx104gpio->out_state &= ~*mask;
- stx104gpio->out_state |= *mask & *bits;
- iowrite8(stx104gpio->out_state, stx104gpio->base);
+ /* initialize DAC outputs to 0V */
+ err = regmap_write(priv->aio_data_map, STX104_DAC_BASE, 0);
+ if (err)
+ return err;
+ err = regmap_write(priv->aio_data_map, STX104_DAC_BASE + STX104_AIO_DATA_STRIDE, 0);
+ if (err)
+ return err;
- spin_unlock_irqrestore(&stx104gpio->lock, flags);
+ return 0;
}
static int stx104_probe(struct device *dev, unsigned int id)
{
struct iio_dev *indio_dev;
struct stx104_iio *priv;
- struct stx104_gpio *stx104gpio;
+ struct gpio_regmap_config gpio_config;
+ void __iomem *stx104_base;
+ struct regmap *aio_ctl_map;
+ struct regmap *aio_data_map;
+ struct regmap *dio_map;
int err;
+ unsigned int adc_status;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
if (!indio_dev)
return -ENOMEM;
- stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL);
- if (!stx104gpio)
- return -ENOMEM;
-
if (!devm_request_region(dev, base[id], STX104_EXTENT,
dev_name(dev))) {
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
@@ -332,16 +387,37 @@ static int stx104_probe(struct device *dev, unsigned int id)
return -EBUSY;
}
- priv = iio_priv(indio_dev);
- priv->reg = devm_ioport_map(dev, base[id], STX104_EXTENT);
- if (!priv->reg)
+ stx104_base = devm_ioport_map(dev, base[id], STX104_EXTENT);
+ if (!stx104_base)
return -ENOMEM;
+ aio_ctl_map = devm_regmap_init_mmio(dev, stx104_base, &aio_ctl_regmap_config);
+ if (IS_ERR(aio_ctl_map))
+ return dev_err_probe(dev, PTR_ERR(aio_ctl_map),
+ "Unable to initialize aio_ctl register map\n");
+
+ aio_data_map = devm_regmap_init_mmio(dev, stx104_base, &aio_data_regmap_config);
+ if (IS_ERR(aio_data_map))
+ return dev_err_probe(dev, PTR_ERR(aio_data_map),
+ "Unable to initialize aio_data register map\n");
+
+ dio_map = devm_regmap_init_mmio(dev, stx104_base, &dio_regmap_config);
+ if (IS_ERR(dio_map))
+ return dev_err_probe(dev, PTR_ERR(dio_map),
+ "Unable to initialize dio register map\n");
+
+ priv = iio_priv(indio_dev);
+ priv->aio_ctl_map = aio_ctl_map;
+ priv->aio_data_map = aio_data_map;
+
indio_dev->info = &stx104_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- /* determine if differential inputs */
- if (ioread8(&priv->reg->cir_asr) & BIT(5)) {
+ err = regmap_read(aio_ctl_map, STX104_ADC_STATUS, &adc_status);
+ if (err)
+ return err;
+
+ if (u8_get_bits(adc_status, STX104_SD) == STX104_DIFFERENTIAL) {
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
indio_dev->channels = stx104_channels_diff;
} else {
@@ -351,41 +427,29 @@ static int stx104_probe(struct device *dev, unsigned int id)
indio_dev->name = dev_name(dev);
- /* configure device for software trigger operation */
- iowrite8(0, &priv->reg->acr);
+ mutex_init(&priv->lock);
- /* initialize gain setting to x1 */
- iowrite8(0, &priv->reg->acfg);
-
- /* initialize DAC output to 0V */
- iowrite16(0, &priv->reg->dac[0]);
- iowrite16(0, &priv->reg->dac[1]);
-
- stx104gpio->chip.label = dev_name(dev);
- stx104gpio->chip.parent = dev;
- stx104gpio->chip.owner = THIS_MODULE;
- stx104gpio->chip.base = -1;
- stx104gpio->chip.ngpio = STX104_NGPIO;
- stx104gpio->chip.names = stx104_names;
- stx104gpio->chip.get_direction = stx104_gpio_get_direction;
- stx104gpio->chip.direction_input = stx104_gpio_direction_input;
- stx104gpio->chip.direction_output = stx104_gpio_direction_output;
- stx104gpio->chip.get = stx104_gpio_get;
- stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
- stx104gpio->chip.set = stx104_gpio_set;
- stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
- stx104gpio->base = &priv->reg->dio;
- stx104gpio->out_state = 0x0;
-
- spin_lock_init(&stx104gpio->lock);
-
- err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio);
- if (err) {
- dev_err(dev, "GPIO registering failed (%d)\n", err);
+ err = stx104_init_hw(priv);
+ if (err)
+ return err;
+
+ err = devm_iio_device_register(dev, indio_dev);
+ if (err)
return err;
- }
- return devm_iio_device_register(dev, indio_dev);
+ gpio_config = (struct gpio_regmap_config) {
+ .parent = dev,
+ .regmap = dio_map,
+ .ngpio = STX104_NGPIO,
+ .names = stx104_names,
+ .reg_dat_base = GPIO_REGMAP_ADDR(STX104_DIO_REG),
+ .reg_set_base = GPIO_REGMAP_ADDR(STX104_DIO_REG),
+ .ngpio_per_reg = STX104_NGPIO,
+ .reg_mask_xlate = stx104_reg_mask_xlate,
+ .drvdata = dio_map,
+ };
+
+ return PTR_ERR_OR_ZERO(devm_gpio_regmap_register(dev, &gpio_config));
}
static struct isa_driver stx104_driver = {
diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c
index 2aed483a2fde..0cb5d9b65d62 100644
--- a/drivers/iio/chemical/sps30_i2c.c
+++ b/drivers/iio/chemical/sps30_i2c.c
@@ -68,10 +68,10 @@ static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size
/*
* Internally sensor stores measurements in a following manner:
*
- * PM1: upper two bytes, crc8, lower two bytes, crc8
+ * PM1: upper two bytes, crc8, lower two bytes, crc8
* PM2P5: upper two bytes, crc8, lower two bytes, crc8
- * PM4: upper two bytes, crc8, lower two bytes, crc8
- * PM10: upper two bytes, crc8, lower two bytes, crc8
+ * PM4: upper two bytes, crc8, lower two bytes, crc8
+ * PM10: upper two bytes, crc8, lower two bytes, crc8
*
* What follows next are number concentration measurements and
* typical particle size measurement which we omit.
diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c
index 899b640c0a70..a0df9250a69f 100644
--- a/drivers/iio/common/st_sensors/st_sensors_trigger.c
+++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c
@@ -85,7 +85,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
*/
if (sdata->hw_irq_trigger &&
st_sensors_new_samples_available(indio_dev, sdata)) {
- iio_trigger_poll_chained(p);
+ iio_trigger_poll_nested(p);
} else {
dev_dbg(indio_dev->dev.parent, "spurious IRQ\n");
return IRQ_NONE;
@@ -110,7 +110,7 @@ static irqreturn_t st_sensors_irq_thread(int irq, void *p)
dev_dbg(indio_dev->dev.parent,
"more samples came in during polling\n");
sdata->hw_timestamp = iio_get_time_ns(indio_dev);
- iio_trigger_poll_chained(p);
+ iio_trigger_poll_nested(p);
}
return IRQ_HANDLED;
diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig
index d3f90cf86143..3acd9c3f388e 100644
--- a/drivers/iio/dac/Kconfig
+++ b/drivers/iio/dac/Kconfig
@@ -277,6 +277,7 @@ config CIO_DAC
tristate "Measurement Computing CIO-DAC IIO driver"
depends on X86 && (ISA_BUS || PC104)
select ISA_BUS_API
+ select REGMAP_MMIO
help
Say yes here to build support for the Measurement Computing CIO-DAC
analog output device family (CIO-DAC16, CIO-DAC08, PC104-DAC06). The
diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index 7a9b5fc1e579..076bc9ecfb49 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -124,6 +124,10 @@ static int ad5592r_gpio_request(struct gpio_chip *chip, unsigned offset)
return 0;
}
+static const char * const ad5592r_gpio_names[] = {
+ "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7",
+};
+
static int ad5592r_gpio_init(struct ad5592r_state *st)
{
if (!st->gpio_map)
@@ -140,6 +144,7 @@ static int ad5592r_gpio_init(struct ad5592r_state *st)
st->gpiochip.set = ad5592r_gpio_set;
st->gpiochip.request = ad5592r_gpio_request;
st->gpiochip.owner = THIS_MODULE;
+ st->gpiochip.names = ad5592r_gpio_names;
mutex_init(&st->gpio_lock);
diff --git a/drivers/iio/dac/cio-dac.c b/drivers/iio/dac/cio-dac.c
index 18a64f72fc18..069904d00c2e 100644
--- a/drivers/iio/dac/cio-dac.c
+++ b/drivers/iio/dac/cio-dac.c
@@ -4,18 +4,17 @@
* Copyright (C) 2016 William Breathitt Gray
*
* This driver supports the following Measurement Computing devices: CIO-DAC16,
- * CIO-DAC06, and PC104-DAC06.
+ * CIO-DAC08, and PC104-DAC06.
*/
-#include <linux/bitops.h>
+#include <linux/bits.h>
#include <linux/device.h>
-#include <linux/errno.h>
+#include <linux/err.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
-#include <linux/io.h>
-#include <linux/ioport.h>
#include <linux/isa.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/regmap.h>
#include <linux/types.h>
#define CIO_DAC_NUM_CHAN 16
@@ -35,25 +34,51 @@ static unsigned int num_cio_dac;
module_param_hw_array(base, uint, ioport, &num_cio_dac, 0);
MODULE_PARM_DESC(base, "Measurement Computing CIO-DAC base addresses");
+#define CIO_DAC_BASE 0x00
+#define CIO_DAC_CHANNEL_STRIDE 2
+
+static bool cio_dac_precious_reg(struct device *dev, unsigned int reg)
+{
+ /*
+ * All registers are considered precious; if the XFER jumper is set on
+ * the device, then no update occurs until a DAC register is read.
+ */
+ return true;
+}
+
+static const struct regmap_config cio_dac_regmap_config = {
+ .reg_bits = 16,
+ .reg_stride = 2,
+ .val_bits = 16,
+ .io_port = true,
+ .max_register = 0x1F,
+ .precious_reg = cio_dac_precious_reg,
+};
+
/**
* struct cio_dac_iio - IIO device private data structure
- * @chan_out_states: channels' output states
- * @base: base memory address of the DAC device
+ * @map: Regmap for the device
*/
struct cio_dac_iio {
- int chan_out_states[CIO_DAC_NUM_CHAN];
- u16 __iomem *base;
+ struct regmap *map;
};
static int cio_dac_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
{
struct cio_dac_iio *const priv = iio_priv(indio_dev);
+ const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
+ int err;
+ unsigned int dac_val;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
- *val = priv->chan_out_states[chan->channel];
+ err = regmap_read(priv->map, CIO_DAC_BASE + offset, &dac_val);
+ if (err)
+ return err;
+
+ *val = dac_val;
return IIO_VAL_INT;
}
@@ -62,6 +87,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan, int val, int val2, long mask)
{
struct cio_dac_iio *const priv = iio_priv(indio_dev);
+ const unsigned int offset = chan->channel * CIO_DAC_CHANNEL_STRIDE;
if (mask != IIO_CHAN_INFO_RAW)
return -EINVAL;
@@ -70,10 +96,7 @@ static int cio_dac_write_raw(struct iio_dev *indio_dev,
if ((unsigned int)val > 4095)
return -EINVAL;
- priv->chan_out_states[chan->channel] = val;
- iowrite16(val, priv->base + chan->channel);
-
- return 0;
+ return regmap_write(priv->map, CIO_DAC_BASE + offset, val);
}
static const struct iio_info cio_dac_info = {
@@ -92,7 +115,7 @@ static int cio_dac_probe(struct device *dev, unsigned int id)
{
struct iio_dev *indio_dev;
struct cio_dac_iio *priv;
- unsigned int i;
+ void __iomem *regs;
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
if (!indio_dev)
@@ -105,21 +128,22 @@ static int cio_dac_probe(struct device *dev, unsigned int id)
return -EBUSY;
}
- priv = iio_priv(indio_dev);
- priv->base = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT);
- if (!priv->base)
+ regs = devm_ioport_map(dev, base[id], CIO_DAC_EXTENT);
+ if (!regs)
return -ENOMEM;
+ priv = iio_priv(indio_dev);
+ priv->map = devm_regmap_init_mmio(dev, regs, &cio_dac_regmap_config);
+ if (IS_ERR(priv->map))
+ return dev_err_probe(dev, PTR_ERR(priv->map),
+ "Unable to initialize register map\n");
+
indio_dev->info = &cio_dac_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = cio_dac_channels;
indio_dev->num_channels = CIO_DAC_NUM_CHAN;
indio_dev->name = dev_name(dev);
- /* initialize DAC outputs to 0V */
- for (i = 0; i < CIO_DAC_NUM_CHAN; i++)
- iowrite16(0, priv->base + i);
-
return devm_iio_device_register(dev, indio_dev);
}
diff --git a/drivers/iio/dac/max5522.c b/drivers/iio/dac/max5522.c
index 00ba4e98fb9c..05034a306597 100644
--- a/drivers/iio/dac/max5522.c
+++ b/drivers/iio/dac/max5522.c
@@ -52,7 +52,7 @@ struct max5522_state {
} \
}
-const struct iio_chan_spec max5522_channels[] = {
+static const struct iio_chan_spec max5522_channels[] = {
MAX5522_CHANNEL(0),
MAX5522_CHANNEL(1),
};
diff --git a/drivers/iio/frequency/admv1013.c b/drivers/iio/frequency/admv1013.c
index ed8167271358..9bf8337806fc 100644
--- a/drivers/iio/frequency/admv1013.c
+++ b/drivers/iio/frequency/admv1013.c
@@ -490,11 +490,6 @@ static int admv1013_init(struct admv1013_state *st)
st->input_mode);
}
-static void admv1013_clk_disable(void *data)
-{
- clk_disable_unprepare(data);
-}
-
static void admv1013_reg_disable(void *data)
{
regulator_disable(data);
@@ -559,11 +554,6 @@ static int admv1013_properties_parse(struct admv1013_state *st)
return dev_err_probe(&spi->dev, PTR_ERR(st->reg),
"failed to get the common-mode voltage\n");
- st->clkin = devm_clk_get(&spi->dev, "lo_in");
- if (IS_ERR(st->clkin))
- return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
- "failed to get the LO input clock\n");
-
return 0;
}
@@ -601,13 +591,10 @@ static int admv1013_probe(struct spi_device *spi)
if (ret)
return ret;
- ret = clk_prepare_enable(st->clkin);
- if (ret)
- return ret;
-
- ret = devm_add_action_or_reset(&spi->dev, admv1013_clk_disable, st->clkin);
- if (ret)
- return ret;
+ st->clkin = devm_clk_get_enabled(&spi->dev, "lo_in");
+ if (IS_ERR(st->clkin))
+ return dev_err_probe(&spi->dev, PTR_ERR(st->clkin),
+ "failed to get the LO input clock\n");
st->nb.notifier_call = admv1013_freq_change;
ret = devm_clk_notifier_register(&spi->dev, st->clkin, &st->nb);
diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c
index 3ea1d4613080..c28d17ca6f5e 100644
--- a/drivers/iio/gyro/fxas21002c_core.c
+++ b/drivers/iio/gyro/fxas21002c_core.c
@@ -813,7 +813,7 @@ static irqreturn_t fxas21002c_data_rdy_thread(int irq, void *private)
if (!data_ready)
return IRQ_NONE;
- iio_trigger_poll_chained(data->dready_trig);
+ iio_trigger_poll_nested(data->dready_trig);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
index 6a6d84a3deda..a791ba3a693a 100644
--- a/drivers/iio/gyro/mpu3050-core.c
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -939,7 +939,7 @@ static irqreturn_t mpu3050_irq_thread(int irq, void *p)
if (!(val & MPU3050_INT_STATUS_RAW_RDY))
return IRQ_NONE;
- iio_trigger_poll_chained(p);
+ iio_trigger_poll_nested(p);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
index 2a4107a79662..11ef38994a95 100644
--- a/drivers/iio/humidity/hts221_buffer.c
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -68,7 +68,7 @@ static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
if (!(status & HTS221_RH_DRDY_MASK))
return IRQ_NONE;
- iio_trigger_poll_chained(hw->trig);
+ iio_trigger_poll_nested(hw->trig);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/imu/adis16475.c b/drivers/iio/imu/adis16475.c
index aec55f7e1f26..3abffb01ba31 100644
--- a/drivers/iio/imu/adis16475.c
+++ b/drivers/iio/imu/adis16475.c
@@ -326,11 +326,11 @@ static int adis16475_set_freq(struct adis16475 *st, const u32 freq)
/*
* This is not an hard requirement but it's not advised to run the IMU
- * with a sample rate lower than 4000Hz due to possible undersampling
+ * with a sample rate lower than 1900Hz due to possible undersampling
* issues. However, there are users that might really want to take the risk.
* Hence, we provide a module parameter for them. If set, we allow sample
- * rates lower than 4KHz. By default, we won't allow this and we just roundup
- * the rate to the next multiple of the input clock bigger than 4KHz. This
+ * rates lower than 1.9KHz. By default, we won't allow this and we just roundup
+ * the rate to the next multiple of the input clock bigger than 1.9KHz. This
* is done like this as in some cases (when DEC_RATE is 0) might give
* us the closest value to the one desired by the user...
*/
diff --git a/drivers/iio/imu/st_lsm6dsx/Kconfig b/drivers/iio/imu/st_lsm6dsx/Kconfig
index 8c16cdacf2f2..5865a295a4df 100644
--- a/drivers/iio/imu/st_lsm6dsx/Kconfig
+++ b/drivers/iio/imu/st_lsm6dsx/Kconfig
@@ -14,8 +14,8 @@ config IIO_ST_LSM6DSX
sensor. Supported devices: lsm6ds3, lsm6ds3h, lsm6dsl, lsm6dsm,
ism330dlc, lsm6dso, lsm6dsox, asm330lhh, asm330lhhx, lsm6dsr,
lsm6ds3tr-c, ism330dhcx, lsm6dsrx, lsm6ds0, lsm6dsop, lsm6dstx,
- lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, lsm6dst and the
- accelerometer/gyroscope of lsm9ds1.
+ lsm6dsv, lsm6dsv16x, lsm6dso16is, ism330is, asm330lhb, lsm6dst
+ and the accelerometer/gyroscope of lsm9ds1.
To compile this driver as a module, choose M here: the module
will be called st_lsm6dsx.
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
index 499fcf8875b4..c19237717e81 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -37,9 +37,10 @@
#define ST_LSM6DSV16X_DEV_NAME "lsm6dsv16x"
#define ST_LSM6DSO16IS_DEV_NAME "lsm6dso16is"
#define ST_ISM330IS_DEV_NAME "ism330is"
+#define ST_ASM330LHB_DEV_NAME "asm330lhb"
enum st_lsm6dsx_hw_id {
- ST_LSM6DS3_ID,
+ ST_LSM6DS3_ID = 1,
ST_LSM6DS3H_ID,
ST_LSM6DSL_ID,
ST_LSM6DSM_ID,
@@ -61,6 +62,7 @@ enum st_lsm6dsx_hw_id {
ST_LSM6DSV16X_ID,
ST_LSM6DSO16IS_ID,
ST_ISM330IS_ID,
+ ST_ASM330LHB_ID,
ST_LSM6DSX_MAX_ID,
};
@@ -137,6 +139,13 @@ struct st_lsm6dsx_odr_table_entry {
int odr_len;
};
+struct st_lsm6dsx_samples_to_discard {
+ struct {
+ u32 milli_hz;
+ u16 samples;
+ } val[ST_LSM6DSX_ODR_LIST_SIZE];
+};
+
struct st_lsm6dsx_fs {
u32 gain;
u8 val;
@@ -291,6 +300,7 @@ struct st_lsm6dsx_ext_dev_settings {
* @irq_config: interrupts related registers.
* @drdy_mask: register info for data-ready mask (addr + mask).
* @odr_table: Hw sensors odr table (Hz + val).
+ * @samples_to_discard: Number of samples to discard for filters settling time.
* @fs_table: Hw sensors gain table (gain + val).
* @decimator: List of decimator register info (addr + mask).
* @batch: List of FIFO batching register info (addr + mask).
@@ -323,6 +333,7 @@ struct st_lsm6dsx_settings {
} irq_config;
struct st_lsm6dsx_reg drdy_mask;
struct st_lsm6dsx_odr_table_entry odr_table[2];
+ struct st_lsm6dsx_samples_to_discard samples_to_discard[2];
struct st_lsm6dsx_fs_table_entry fs_table[2];
struct st_lsm6dsx_reg decimator[ST_LSM6DSX_MAX_ID];
struct st_lsm6dsx_reg batch[ST_LSM6DSX_MAX_ID];
@@ -353,6 +364,7 @@ enum st_lsm6dsx_fifo_mode {
* @hw: Pointer to instance of struct st_lsm6dsx_hw.
* @gain: Configured sensor sensitivity.
* @odr: Output data rate of the sensor [Hz].
+ * @samples_to_discard: Number of samples to discard for filters settling time.
* @watermark: Sensor watermark level.
* @decimator: Sensor decimation factor.
* @sip: Number of samples in a given pattern.
@@ -367,6 +379,7 @@ struct st_lsm6dsx_sensor {
u32 gain;
u32 odr;
+ u16 samples_to_discard;
u16 watermark;
u8 decimator;
u8 sip;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
index 7dd5205aea5b..066fe561c5e8 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c
@@ -15,7 +15,7 @@
* value of the decimation factor and ODR set for each FIFO data set.
*
* LSM6DSO/LSM6DSOX/ASM330LHH/ASM330LHHX/LSM6DSR/LSM6DSRX/ISM330DHCX/
- * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV:
+ * LSM6DST/LSM6DSOP/LSM6DSTX/LSM6DSV/ASM330LHB:
* The FIFO buffer can be configured to store data from gyroscope and
* accelerometer. Each sample is queued with a tag (1B) indicating data
* source (gyroscope, accelerometer, hw timer).
@@ -457,17 +457,31 @@ int st_lsm6dsx_read_fifo(struct st_lsm6dsx_hw *hw)
}
if (gyro_sip > 0 && !(sip % gyro_sensor->decimator)) {
- iio_push_to_buffers_with_timestamp(
- hw->iio_devs[ST_LSM6DSX_ID_GYRO],
- &hw->scan[ST_LSM6DSX_ID_GYRO],
- gyro_sensor->ts_ref + ts);
+ /*
+ * We need to discards gyro samples during
+ * filters settling time
+ */
+ if (gyro_sensor->samples_to_discard > 0)
+ gyro_sensor->samples_to_discard--;
+ else
+ iio_push_to_buffers_with_timestamp(
+ hw->iio_devs[ST_LSM6DSX_ID_GYRO],
+ &hw->scan[ST_LSM6DSX_ID_GYRO],
+ gyro_sensor->ts_ref + ts);
gyro_sip--;
}
if (acc_sip > 0 && !(sip % acc_sensor->decimator)) {
- iio_push_to_buffers_with_timestamp(
- hw->iio_devs[ST_LSM6DSX_ID_ACC],
- &hw->scan[ST_LSM6DSX_ID_ACC],
- acc_sensor->ts_ref + ts);
+ /*
+ * We need to discards accel samples during
+ * filters settling time
+ */
+ if (acc_sensor->samples_to_discard > 0)
+ acc_sensor->samples_to_discard--;
+ else
+ iio_push_to_buffers_with_timestamp(
+ hw->iio_devs[ST_LSM6DSX_ID_ACC],
+ &hw->scan[ST_LSM6DSX_ID_ACC],
+ acc_sensor->ts_ref + ts);
acc_sip--;
}
if (ext_sip > 0 && !(sip % ext_sensor->decimator)) {
@@ -654,6 +668,30 @@ int st_lsm6dsx_flush_fifo(struct st_lsm6dsx_hw *hw)
return err;
}
+static void
+st_lsm6dsx_update_samples_to_discard(struct st_lsm6dsx_sensor *sensor)
+{
+ const struct st_lsm6dsx_samples_to_discard *data;
+ struct st_lsm6dsx_hw *hw = sensor->hw;
+ int i;
+
+ if (sensor->id != ST_LSM6DSX_ID_GYRO &&
+ sensor->id != ST_LSM6DSX_ID_ACC)
+ return;
+
+ /* check if drdy mask is supported in hw */
+ if (hw->settings->drdy_mask.addr)
+ return;
+
+ data = &hw->settings->samples_to_discard[sensor->id];
+ for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) {
+ if (data->val[i].milli_hz == sensor->odr) {
+ sensor->samples_to_discard = data->val[i].samples;
+ return;
+ }
+ }
+}
+
int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
{
struct st_lsm6dsx_hw *hw = sensor->hw;
@@ -673,6 +711,9 @@ int st_lsm6dsx_update_fifo(struct st_lsm6dsx_sensor *sensor, bool enable)
goto out;
}
+ if (enable)
+ st_lsm6dsx_update_samples_to_discard(sensor);
+
err = st_lsm6dsx_device_set_enable(sensor, enable);
if (err < 0)
goto out;
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
index 3f6060c64f32..6a18b363cf73 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_core.c
@@ -56,6 +56,7 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/acpi.h>
#include <linux/delay.h>
#include <linux/iio/events.h>
#include <linux/iio/iio.h>
@@ -634,6 +635,24 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.fs_len = 4,
},
},
+ .samples_to_discard = {
+ [ST_LSM6DSX_ID_ACC] = {
+ .val[0] = { 12500, 1 },
+ .val[1] = { 26000, 1 },
+ .val[2] = { 52000, 1 },
+ .val[3] = { 104000, 2 },
+ .val[4] = { 208000, 2 },
+ .val[5] = { 416000, 2 },
+ },
+ [ST_LSM6DSX_ID_GYRO] = {
+ .val[0] = { 12500, 2 },
+ .val[1] = { 26000, 5 },
+ .val[2] = { 52000, 7 },
+ .val[3] = { 104000, 12 },
+ .val[4] = { 208000, 20 },
+ .val[5] = { 416000, 36 },
+ },
+ },
.irq_config = {
.irq1 = {
.addr = 0x0d,
@@ -1014,6 +1033,10 @@ static const struct st_lsm6dsx_settings st_lsm6dsx_sensor_settings[] = {
.hw_id = ST_LSM6DSOP_ID,
.name = ST_LSM6DSOP_DEV_NAME,
.wai = 0x6c,
+ }, {
+ .hw_id = ST_ASM330LHB_ID,
+ .name = ST_ASM330LHB_DEV_NAME,
+ .wai = 0x6b,
},
},
.channels = {
@@ -2602,6 +2625,73 @@ static int st_lsm6dsx_init_regulators(struct device *dev)
return 0;
}
+#ifdef CONFIG_ACPI
+
+static int lsm6dsx_get_acpi_mount_matrix(struct device *dev,
+ struct iio_mount_matrix *orientation)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ union acpi_object *obj, *elements;
+ acpi_status status;
+ int i, j, val[3];
+ char *str;
+
+ if (!has_acpi_companion(dev))
+ return -EINVAL;
+
+ if (!acpi_has_method(adev->handle, "ROTM"))
+ return -EINVAL;
+
+ status = acpi_evaluate_object(adev->handle, "ROTM", NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ dev_warn(dev, "Failed to get ACPI mount matrix: %d\n", status);
+ return -EINVAL;
+ }
+
+ obj = buffer.pointer;
+ if (obj->type != ACPI_TYPE_PACKAGE || obj->package.count != 3)
+ goto unknown_format;
+
+ elements = obj->package.elements;
+ for (i = 0; i < 3; i++) {
+ if (elements[i].type != ACPI_TYPE_STRING)
+ goto unknown_format;
+
+ str = elements[i].string.pointer;
+ if (sscanf(str, "%d %d %d", &val[0], &val[1], &val[2]) != 3)
+ goto unknown_format;
+
+ for (j = 0; j < 3; j++) {
+ switch (val[j]) {
+ case -1: str = "-1"; break;
+ case 0: str = "0"; break;
+ case 1: str = "1"; break;
+ default: goto unknown_format;
+ }
+ orientation->rotation[i * 3 + j] = str;
+ }
+ }
+
+ kfree(buffer.pointer);
+ return 0;
+
+unknown_format:
+ dev_warn(dev, "Unknown ACPI mount matrix format, ignoring\n");
+ kfree(buffer.pointer);
+ return -EINVAL;
+}
+
+#else
+
+static int lsm6dsx_get_acpi_mount_matrix(struct device *dev,
+ struct iio_mount_matrix *orientation)
+{
+ return false;
+}
+
+#endif
+
int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
struct regmap *regmap)
{
@@ -2676,9 +2766,12 @@ int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
return err;
}
- err = iio_read_mount_matrix(hw->dev, &hw->orientation);
- if (err)
- return err;
+ err = lsm6dsx_get_acpi_mount_matrix(hw->dev, &hw->orientation);
+ if (err) {
+ err = iio_read_mount_matrix(hw->dev, &hw->orientation);
+ if (err)
+ return err;
+ }
for (i = 0; i < ST_LSM6DSX_ID_MAX; i++) {
if (!hw->iio_devs[i])
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
index df5f60925260..020717f92363 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_i2c.c
@@ -23,10 +23,15 @@ static const struct regmap_config st_lsm6dsx_i2c_regmap_config = {
static int st_lsm6dsx_i2c_probe(struct i2c_client *client)
{
- const struct i2c_device_id *id = i2c_client_get_device_id(client);
- int hw_id = id->driver_data;
+ int hw_id;
struct regmap *regmap;
+ hw_id = (kernel_ulong_t)device_get_match_data(&client->dev);
+ if (!hw_id)
+ hw_id = i2c_client_get_device_id(client)->driver_data;
+ if (!hw_id)
+ return -EINVAL;
+
regmap = devm_regmap_init_i2c(client, &st_lsm6dsx_i2c_regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
@@ -125,10 +130,20 @@ static const struct of_device_id st_lsm6dsx_i2c_of_match[] = {
.compatible = "st,ism330is",
.data = (void *)ST_ISM330IS_ID,
},
+ {
+ .compatible = "st,asm330lhb",
+ .data = (void *)ST_ASM330LHB_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_i2c_of_match);
+static const struct acpi_device_id st_lsm6dsx_i2c_acpi_match[] = {
+ { "SMO8B30", ST_LSM6DS3TRC_ID, },
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, st_lsm6dsx_i2c_acpi_match);
+
static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DS3_DEV_NAME, ST_LSM6DS3_ID },
{ ST_LSM6DS3H_DEV_NAME, ST_LSM6DS3H_ID },
@@ -152,6 +167,7 @@ static const struct i2c_device_id st_lsm6dsx_i2c_id_table[] = {
{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
+ { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
{},
};
MODULE_DEVICE_TABLE(i2c, st_lsm6dsx_i2c_id_table);
@@ -161,6 +177,7 @@ static struct i2c_driver st_lsm6dsx_driver = {
.name = "st_lsm6dsx_i2c",
.pm = pm_sleep_ptr(&st_lsm6dsx_pm_ops),
.of_match_table = st_lsm6dsx_i2c_of_match,
+ .acpi_match_table = st_lsm6dsx_i2c_acpi_match,
},
.probe_new = st_lsm6dsx_i2c_probe,
.id_table = st_lsm6dsx_i2c_id_table,
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
index 974584bda875..f56c170c41a9 100644
--- a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_spi.c
@@ -125,6 +125,10 @@ static const struct of_device_id st_lsm6dsx_spi_of_match[] = {
.compatible = "st,ism330is",
.data = (void *)ST_ISM330IS_ID,
},
+ {
+ .compatible = "st,asm330lhb",
+ .data = (void *)ST_ASM330LHB_ID,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_lsm6dsx_spi_of_match);
@@ -152,6 +156,7 @@ static const struct spi_device_id st_lsm6dsx_spi_id_table[] = {
{ ST_LSM6DSV16X_DEV_NAME, ST_LSM6DSV16X_ID },
{ ST_LSM6DSO16IS_DEV_NAME, ST_LSM6DSO16IS_ID },
{ ST_ISM330IS_DEV_NAME, ST_ISM330IS_ID },
+ { ST_ASM330LHB_DEV_NAME, ST_ASM330LHB_ID },
{},
};
MODULE_DEVICE_TABLE(spi, st_lsm6dsx_spi_id_table);
diff --git a/drivers/iio/industrialio-gts-helper.c b/drivers/iio/industrialio-gts-helper.c
new file mode 100644
index 000000000000..8bb68975b259
--- /dev/null
+++ b/drivers/iio/industrialio-gts-helper.c
@@ -0,0 +1,1077 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* gain-time-scale conversion helpers for IIO light sensors
+ *
+ * Copyright (c) 2023 Matti Vaittinen <mazziesaccount@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/minmax.h>
+#include <linux/module.h>
+#include <linux/overflow.h>
+#include <linux/slab.h>
+#include <linux/sort.h>
+#include <linux/types.h>
+#include <linux/units.h>
+
+#include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/types.h>
+
+/**
+ * iio_gts_get_gain - Convert scale to total gain
+ *
+ * Internal helper for converting scale to total gain.
+ *
+ * @max: Maximum linearized scale. As an example, when scale is created
+ * in magnitude of NANOs and max scale is 64.1 - The linearized
+ * scale is 64 100 000 000.
+ * @scale: Linearized scale to compute the gain for.
+ *
+ * Return: (floored) gain corresponding to the scale. -EINVAL if scale
+ * is invalid.
+ */
+static int iio_gts_get_gain(const u64 max, const u64 scale)
+{
+ u64 full = max;
+ int tmp = 1;
+
+ if (scale > full || !scale)
+ return -EINVAL;
+
+ if (U64_MAX - full < scale) {
+ /* Risk of overflow */
+ if (full - scale < scale)
+ return 1;
+
+ full -= scale;
+ tmp++;
+ }
+
+ while (full > scale * (u64)tmp)
+ tmp++;
+
+ return tmp;
+}
+
+/**
+ * gain_get_scale_fraction - get the gain or time based on scale and known one
+ *
+ * @max: Maximum linearized scale. As an example, when scale is created
+ * in magnitude of NANOs and max scale is 64.1 - The linearized
+ * scale is 64 100 000 000.
+ * @scale: Linearized scale to compute the gain/time for.
+ * @known: Either integration time or gain depending on which one is known
+ * @unknown: Pointer to variable where the computed gain/time is stored
+ *
+ * Internal helper for computing unknown fraction of total gain.
+ * Compute either gain or time based on scale and either the gain or time
+ * depending on which one is known.
+ *
+ * Return: 0 on success.
+ */
+static int gain_get_scale_fraction(const u64 max, u64 scale, int known,
+ int *unknown)
+{
+ int tot_gain;
+
+ tot_gain = iio_gts_get_gain(max, scale);
+ if (tot_gain < 0)
+ return tot_gain;
+
+ *unknown = tot_gain / known;
+
+ /* We require total gain to be exact multiple of known * unknown */
+ if (!*unknown || *unknown * known != tot_gain)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int iio_gts_delinearize(u64 lin_scale, unsigned long scaler,
+ int *scale_whole, int *scale_nano)
+{
+ int frac;
+
+ if (scaler > NANO)
+ return -EOVERFLOW;
+
+ if (!scaler)
+ return -EINVAL;
+
+ frac = do_div(lin_scale, scaler);
+
+ *scale_whole = lin_scale;
+ *scale_nano = frac * (NANO / scaler);
+
+ return 0;
+}
+
+static int iio_gts_linearize(int scale_whole, int scale_nano,
+ unsigned long scaler, u64 *lin_scale)
+{
+ /*
+ * Expect scale to be (mostly) NANO or MICRO. Divide divider instead of
+ * multiplication followed by division to avoid overflow.
+ */
+ if (scaler > NANO || !scaler)
+ return -EINVAL;
+
+ *lin_scale = (u64)scale_whole * (u64)scaler +
+ (u64)(scale_nano / (NANO / scaler));
+
+ return 0;
+}
+
+/**
+ * iio_gts_total_gain_to_scale - convert gain to scale
+ * @gts: Gain time scale descriptor
+ * @total_gain: the gain to be converted
+ * @scale_int: Pointer to integral part of the scale (typically val1)
+ * @scale_nano: Pointer to fractional part of the scale (nano or ppb)
+ *
+ * Convert the total gain value to scale. NOTE: This does not separate gain
+ * generated by HW-gain or integration time. It is up to caller to decide what
+ * part of the total gain is due to integration time and what due to HW-gain.
+ *
+ * Return: 0 on success. Negative errno on failure.
+ */
+int iio_gts_total_gain_to_scale(struct iio_gts *gts, int total_gain,
+ int *scale_int, int *scale_nano)
+{
+ u64 tmp;
+
+ tmp = gts->max_scale;
+
+ do_div(tmp, total_gain);
+
+ return iio_gts_delinearize(tmp, NANO, scale_int, scale_nano);
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_total_gain_to_scale, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_purge_avail_scale_table - free-up the available scale tables
+ * @gts: Gain time scale descriptor
+ *
+ * Free the space reserved by iio_gts_build_avail_scale_table().
+ */
+static void iio_gts_purge_avail_scale_table(struct iio_gts *gts)
+{
+ int i;
+
+ if (gts->per_time_avail_scale_tables) {
+ for (i = 0; i < gts->num_itime; i++)
+ kfree(gts->per_time_avail_scale_tables[i]);
+
+ kfree(gts->per_time_avail_scale_tables);
+ gts->per_time_avail_scale_tables = NULL;
+ }
+
+ kfree(gts->avail_all_scales_table);
+ gts->avail_all_scales_table = NULL;
+
+ gts->num_avail_all_scales = 0;
+}
+
+static int iio_gts_gain_cmp(const void *a, const void *b)
+{
+ return *(int *)a - *(int *)b;
+}
+
+static int gain_to_scaletables(struct iio_gts *gts, int **gains, int **scales)
+{
+ int ret, i, j, new_idx, time_idx;
+ int *all_gains;
+ size_t gain_bytes;
+
+ for (i = 0; i < gts->num_itime; i++) {
+ /*
+ * Sort the tables for nice output and for easier finding of
+ * unique values.
+ */
+ sort(gains[i], gts->num_hwgain, sizeof(int), iio_gts_gain_cmp,
+ NULL);
+
+ /* Convert gains to scales */
+ for (j = 0; j < gts->num_hwgain; j++) {
+ ret = iio_gts_total_gain_to_scale(gts, gains[i][j],
+ &scales[i][2 * j],
+ &scales[i][2 * j + 1]);
+ if (ret)
+ return ret;
+ }
+ }
+
+ gain_bytes = array_size(gts->num_hwgain, sizeof(int));
+ all_gains = kcalloc(gts->num_itime, gain_bytes, GFP_KERNEL);
+ if (!all_gains)
+ return -ENOMEM;
+
+ /*
+ * We assume all the gains for same integration time were unique.
+ * It is likely the first time table had greatest time multiplier as
+ * the times are in the order of preference and greater times are
+ * usually preferred. Hence we start from the last table which is likely
+ * to have the smallest total gains.
+ */
+ time_idx = gts->num_itime - 1;
+ memcpy(all_gains, gains[time_idx], gain_bytes);
+ new_idx = gts->num_hwgain;
+
+ while (time_idx--) {
+ for (j = 0; j < gts->num_hwgain; j++) {
+ int candidate = gains[time_idx][j];
+ int chk;
+
+ if (candidate > all_gains[new_idx - 1]) {
+ all_gains[new_idx] = candidate;
+ new_idx++;
+
+ continue;
+ }
+ for (chk = 0; chk < new_idx; chk++)
+ if (candidate <= all_gains[chk])
+ break;
+
+ if (candidate == all_gains[chk])
+ continue;
+
+ memmove(&all_gains[chk + 1], &all_gains[chk],
+ (new_idx - chk) * sizeof(int));
+ all_gains[chk] = candidate;
+ new_idx++;
+ }
+ }
+
+ gts->avail_all_scales_table = kcalloc(new_idx, 2 * sizeof(int),
+ GFP_KERNEL);
+ if (!gts->avail_all_scales_table) {
+ ret = -ENOMEM;
+ goto free_out;
+ }
+ gts->num_avail_all_scales = new_idx;
+
+ for (i = 0; i < gts->num_avail_all_scales; i++) {
+ ret = iio_gts_total_gain_to_scale(gts, all_gains[i],
+ &gts->avail_all_scales_table[i * 2],
+ &gts->avail_all_scales_table[i * 2 + 1]);
+
+ if (ret) {
+ kfree(gts->avail_all_scales_table);
+ gts->num_avail_all_scales = 0;
+ goto free_out;
+ }
+ }
+
+free_out:
+ kfree(all_gains);
+
+ return ret;
+}
+
+/**
+ * iio_gts_build_avail_scale_table - create tables of available scales
+ * @gts: Gain time scale descriptor
+ *
+ * Build the tables which can represent the available scales based on the
+ * originally given gain and time tables. When both time and gain tables are
+ * given this results:
+ * 1. A set of tables representing available scales for each supported
+ * integration time.
+ * 2. A single table listing all the unique scales that any combination of
+ * supported gains and times can provide.
+ *
+ * NOTE: Space allocated for the tables must be freed using
+ * iio_gts_purge_avail_scale_table() when the tables are no longer needed.
+ *
+ * Return: 0 on success.
+ */
+static int iio_gts_build_avail_scale_table(struct iio_gts *gts)
+{
+ int **per_time_gains, **per_time_scales, i, j, ret = -ENOMEM;
+
+ per_time_gains = kcalloc(gts->num_itime, sizeof(*per_time_gains), GFP_KERNEL);
+ if (!per_time_gains)
+ return ret;
+
+ per_time_scales = kcalloc(gts->num_itime, sizeof(*per_time_scales), GFP_KERNEL);
+ if (!per_time_scales)
+ goto free_gains;
+
+ for (i = 0; i < gts->num_itime; i++) {
+ per_time_scales[i] = kcalloc(gts->num_hwgain, 2 * sizeof(int),
+ GFP_KERNEL);
+ if (!per_time_scales[i])
+ goto err_free_out;
+
+ per_time_gains[i] = kcalloc(gts->num_hwgain, sizeof(int),
+ GFP_KERNEL);
+ if (!per_time_gains[i]) {
+ kfree(per_time_scales[i]);
+ goto err_free_out;
+ }
+
+ for (j = 0; j < gts->num_hwgain; j++)
+ per_time_gains[i][j] = gts->hwgain_table[j].gain *
+ gts->itime_table[i].mul;
+ }
+
+ ret = gain_to_scaletables(gts, per_time_gains, per_time_scales);
+ if (ret)
+ goto err_free_out;
+
+ kfree(per_time_gains);
+ gts->per_time_avail_scale_tables = per_time_scales;
+
+ return 0;
+
+err_free_out:
+ for (i--; i; i--) {
+ kfree(per_time_scales[i]);
+ kfree(per_time_gains[i]);
+ }
+ kfree(per_time_scales);
+free_gains:
+ kfree(per_time_gains);
+
+ return ret;
+}
+
+/**
+ * iio_gts_build_avail_time_table - build table of available integration times
+ * @gts: Gain time scale descriptor
+ *
+ * Build the table which can represent the available times to be returned
+ * to users using the read_avail-callback.
+ *
+ * NOTE: Space allocated for the tables must be freed using
+ * iio_gts_purge_avail_time_table() when the tables are no longer needed.
+ *
+ * Return: 0 on success.
+ */
+static int iio_gts_build_avail_time_table(struct iio_gts *gts)
+{
+ int *times, i, j, idx = 0;
+
+ if (!gts->num_itime)
+ return 0;
+
+ times = kcalloc(gts->num_itime, sizeof(int), GFP_KERNEL);
+ if (!times)
+ return -ENOMEM;
+
+ /* Sort times from all tables to one and remove duplicates */
+ for (i = gts->num_itime - 1; i >= 0; i--) {
+ int new = gts->itime_table[i].time_us;
+
+ if (times[idx] < new) {
+ times[idx++] = new;
+ continue;
+ }
+
+ for (j = 0; j <= idx; j++) {
+ if (times[j] > new) {
+ memmove(&times[j + 1], &times[j],
+ (idx - j) * sizeof(int));
+ times[j] = new;
+ idx++;
+ }
+ }
+ }
+ gts->avail_time_tables = times;
+ /*
+ * This is just to survive a unlikely corner-case where times in the
+ * given time table were not unique. Else we could just trust the
+ * gts->num_itime.
+ */
+ gts->num_avail_time_tables = idx;
+
+ return 0;
+}
+
+/**
+ * iio_gts_purge_avail_time_table - free-up the available integration time table
+ * @gts: Gain time scale descriptor
+ *
+ * Free the space reserved by iio_gts_build_avail_time_table().
+ */
+static void iio_gts_purge_avail_time_table(struct iio_gts *gts)
+{
+ if (gts->num_avail_time_tables) {
+ kfree(gts->avail_time_tables);
+ gts->avail_time_tables = NULL;
+ gts->num_avail_time_tables = 0;
+ }
+}
+
+/**
+ * iio_gts_build_avail_tables - create tables of available scales and int times
+ * @gts: Gain time scale descriptor
+ *
+ * Build the tables which can represent the available scales and available
+ * integration times. Availability tables are built based on the originally
+ * given gain and given time tables.
+ *
+ * When both time and gain tables are
+ * given this results:
+ * 1. A set of sorted tables representing available scales for each supported
+ * integration time.
+ * 2. A single sorted table listing all the unique scales that any combination
+ * of supported gains and times can provide.
+ * 3. A sorted table of supported integration times
+ *
+ * After these tables are built one can use the iio_gts_all_avail_scales(),
+ * iio_gts_avail_scales_for_time() and iio_gts_avail_times() helpers to
+ * implement the read_avail operations.
+ *
+ * NOTE: Space allocated for the tables must be freed using
+ * iio_gts_purge_avail_tables() when the tables are no longer needed.
+ *
+ * Return: 0 on success.
+ */
+static int iio_gts_build_avail_tables(struct iio_gts *gts)
+{
+ int ret;
+
+ ret = iio_gts_build_avail_scale_table(gts);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_build_avail_time_table(gts);
+ if (ret)
+ iio_gts_purge_avail_scale_table(gts);
+
+ return ret;
+}
+
+/**
+ * iio_gts_purge_avail_tables - free-up the availability tables
+ * @gts: Gain time scale descriptor
+ *
+ * Free the space reserved by iio_gts_build_avail_tables(). Frees both the
+ * integration time and scale tables.
+ */
+static void iio_gts_purge_avail_tables(struct iio_gts *gts)
+{
+ iio_gts_purge_avail_time_table(gts);
+ iio_gts_purge_avail_scale_table(gts);
+}
+
+static void devm_iio_gts_avail_all_drop(void *res)
+{
+ iio_gts_purge_avail_tables(res);
+}
+
+/**
+ * devm_iio_gts_build_avail_tables - manged add availability tables
+ * @dev: Pointer to the device whose lifetime tables are bound
+ * @gts: Gain time scale descriptor
+ *
+ * Build the tables which can represent the available scales and available
+ * integration times. Availability tables are built based on the originally
+ * given gain and given time tables.
+ *
+ * When both time and gain tables are given this results:
+ * 1. A set of sorted tables representing available scales for each supported
+ * integration time.
+ * 2. A single sorted table listing all the unique scales that any combination
+ * of supported gains and times can provide.
+ * 3. A sorted table of supported integration times
+ *
+ * After these tables are built one can use the iio_gts_all_avail_scales(),
+ * iio_gts_avail_scales_for_time() and iio_gts_avail_times() helpers to
+ * implement the read_avail operations.
+ *
+ * The tables are automatically released upon device detach.
+ *
+ * Return: 0 on success.
+ */
+static int devm_iio_gts_build_avail_tables(struct device *dev,
+ struct iio_gts *gts)
+{
+ int ret;
+
+ ret = iio_gts_build_avail_tables(gts);
+ if (ret)
+ return ret;
+
+ return devm_add_action_or_reset(dev, devm_iio_gts_avail_all_drop, gts);
+}
+
+static int sanity_check_time(const struct iio_itime_sel_mul *t)
+{
+ if (t->sel < 0 || t->time_us < 0 || t->mul <= 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int sanity_check_gain(const struct iio_gain_sel_pair *g)
+{
+ if (g->sel < 0 || g->gain <= 0)
+ return -EINVAL;
+
+ return 0;
+}
+
+static int iio_gts_sanity_check(struct iio_gts *gts)
+{
+ int g, t, ret;
+
+ if (!gts->num_hwgain && !gts->num_itime)
+ return -EINVAL;
+
+ for (t = 0; t < gts->num_itime; t++) {
+ ret = sanity_check_time(&gts->itime_table[t]);
+ if (ret)
+ return ret;
+ }
+
+ for (g = 0; g < gts->num_hwgain; g++) {
+ ret = sanity_check_gain(&gts->hwgain_table[g]);
+ if (ret)
+ return ret;
+ }
+
+ for (g = 0; g < gts->num_hwgain; g++) {
+ for (t = 0; t < gts->num_itime; t++) {
+ int gain, mul, res;
+
+ gain = gts->hwgain_table[g].gain;
+ mul = gts->itime_table[t].mul;
+
+ if (check_mul_overflow(gain, mul, &res))
+ return -EOVERFLOW;
+ }
+ }
+
+ return 0;
+}
+
+static int iio_init_iio_gts(int max_scale_int, int max_scale_nano,
+ const struct iio_gain_sel_pair *gain_tbl, int num_gain,
+ const struct iio_itime_sel_mul *tim_tbl, int num_times,
+ struct iio_gts *gts)
+{
+ int ret;
+
+ memset(gts, 0, sizeof(*gts));
+
+ ret = iio_gts_linearize(max_scale_int, max_scale_nano, NANO,
+ &gts->max_scale);
+ if (ret)
+ return ret;
+
+ gts->hwgain_table = gain_tbl;
+ gts->num_hwgain = num_gain;
+ gts->itime_table = tim_tbl;
+ gts->num_itime = num_times;
+
+ return iio_gts_sanity_check(gts);
+}
+
+/**
+ * devm_iio_init_iio_gts - Initialize the gain-time-scale helper
+ * @dev: Pointer to the device whose lifetime gts resources are
+ * bound
+ * @max_scale_int: integer part of the maximum scale value
+ * @max_scale_nano: fraction part of the maximum scale value
+ * @gain_tbl: table describing supported gains
+ * @num_gain: number of gains in the gain table
+ * @tim_tbl: table describing supported integration times. Provide
+ * the integration time table sorted so that the preferred
+ * integration time is in the first array index. The search
+ * functions like the
+ * iio_gts_find_time_and_gain_sel_for_scale() start search
+ * from first provided time.
+ * @num_times: number of times in the time table
+ * @gts: pointer to the helper struct
+ *
+ * Initialize the gain-time-scale helper for use. Note, gains, times, selectors
+ * and multipliers must be positive. Negative values are reserved for error
+ * checking. The total gain (maximum gain * maximum time multiplier) must not
+ * overflow int. The allocated resources will be released upon device detach.
+ *
+ * Return: 0 on success.
+ */
+int devm_iio_init_iio_gts(struct device *dev, int max_scale_int, int max_scale_nano,
+ const struct iio_gain_sel_pair *gain_tbl, int num_gain,
+ const struct iio_itime_sel_mul *tim_tbl, int num_times,
+ struct iio_gts *gts)
+{
+ int ret;
+
+ ret = iio_init_iio_gts(max_scale_int, max_scale_nano, gain_tbl,
+ num_gain, tim_tbl, num_times, gts);
+ if (ret)
+ return ret;
+
+ return devm_iio_gts_build_avail_tables(dev, gts);
+}
+EXPORT_SYMBOL_NS_GPL(devm_iio_init_iio_gts, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_all_avail_scales - helper for listing all available scales
+ * @gts: Gain time scale descriptor
+ * @vals: Returned array of supported scales
+ * @type: Type of returned scale values
+ * @length: Amount of returned values in array
+ *
+ * Return: a value suitable to be returned from read_avail or a negative error.
+ */
+int iio_gts_all_avail_scales(struct iio_gts *gts, const int **vals, int *type,
+ int *length)
+{
+ if (!gts->num_avail_all_scales)
+ return -EINVAL;
+
+ *vals = gts->avail_all_scales_table;
+ *type = IIO_VAL_INT_PLUS_NANO;
+ *length = gts->num_avail_all_scales * 2;
+
+ return IIO_AVAIL_LIST;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_all_avail_scales, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_avail_scales_for_time - list scales for integration time
+ * @gts: Gain time scale descriptor
+ * @time: Integration time for which the scales are listed
+ * @vals: Returned array of supported scales
+ * @type: Type of returned scale values
+ * @length: Amount of returned values in array
+ *
+ * Drivers which do not allow scale setting to change integration time can
+ * use this helper to list only the scales which are valid for given integration
+ * time.
+ *
+ * Return: a value suitable to be returned from read_avail or a negative error.
+ */
+int iio_gts_avail_scales_for_time(struct iio_gts *gts, int time,
+ const int **vals, int *type, int *length)
+{
+ int i;
+
+ for (i = 0; i < gts->num_itime; i++)
+ if (gts->itime_table[i].time_us == time)
+ break;
+
+ if (i == gts->num_itime)
+ return -EINVAL;
+
+ *vals = gts->per_time_avail_scale_tables[i];
+ *type = IIO_VAL_INT_PLUS_NANO;
+ *length = gts->num_hwgain * 2;
+
+ return IIO_AVAIL_LIST;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_avail_scales_for_time, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_avail_times - helper for listing available integration times
+ * @gts: Gain time scale descriptor
+ * @vals: Returned array of supported times
+ * @type: Type of returned scale values
+ * @length: Amount of returned values in array
+ *
+ * Return: a value suitable to be returned from read_avail or a negative error.
+ */
+int iio_gts_avail_times(struct iio_gts *gts, const int **vals, int *type,
+ int *length)
+{
+ if (!gts->num_avail_time_tables)
+ return -EINVAL;
+
+ *vals = gts->avail_time_tables;
+ *type = IIO_VAL_INT;
+ *length = gts->num_avail_time_tables;
+
+ return IIO_AVAIL_LIST;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_avail_times, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_find_sel_by_gain - find selector corresponding to a HW-gain
+ * @gts: Gain time scale descriptor
+ * @gain: HW-gain for which matching selector is searched for
+ *
+ * Return: a selector matching given HW-gain or -EINVAL if selector was
+ * not found.
+ */
+int iio_gts_find_sel_by_gain(struct iio_gts *gts, int gain)
+{
+ int i;
+
+ for (i = 0; i < gts->num_hwgain; i++)
+ if (gts->hwgain_table[i].gain == gain)
+ return gts->hwgain_table[i].sel;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_find_sel_by_gain, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_find_gain_by_sel - find HW-gain corresponding to a selector
+ * @gts: Gain time scale descriptor
+ * @sel: selector for which matching HW-gain is searched for
+ *
+ * Return: a HW-gain matching given selector or -EINVAL if HW-gain was not
+ * found.
+ */
+int iio_gts_find_gain_by_sel(struct iio_gts *gts, int sel)
+{
+ int i;
+
+ for (i = 0; i < gts->num_hwgain; i++)
+ if (gts->hwgain_table[i].sel == sel)
+ return gts->hwgain_table[i].gain;
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_find_gain_by_sel, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_get_min_gain - find smallest valid HW-gain
+ * @gts: Gain time scale descriptor
+ *
+ * Return: The smallest HW-gain -EINVAL if no HW-gains were in the tables.
+ */
+int iio_gts_get_min_gain(struct iio_gts *gts)
+{
+ int i, min = -EINVAL;
+
+ for (i = 0; i < gts->num_hwgain; i++) {
+ int gain = gts->hwgain_table[i].gain;
+
+ if (min == -EINVAL)
+ min = gain;
+ else
+ min = min(min, gain);
+ }
+
+ return min;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_get_min_gain, IIO_GTS_HELPER);
+
+/**
+ * iio_find_closest_gain_low - Find the closest lower matching gain
+ * @gts: Gain time scale descriptor
+ * @gain: HW-gain for which the closest match is searched
+ * @in_range: indicate if the @gain was actually in the range of
+ * supported gains.
+ *
+ * Search for closest supported gain that is lower than or equal to the
+ * gain given as a parameter. This is usable for drivers which do not require
+ * user to request exact matching gain but rather for rounding to a supported
+ * gain value which is equal or lower (setting lower gain is typical for
+ * avoiding saturation)
+ *
+ * Return: The closest matching supported gain or -EINVAL if @gain
+ * was smaller than the smallest supported gain.
+ */
+int iio_find_closest_gain_low(struct iio_gts *gts, int gain, bool *in_range)
+{
+ int i, diff = 0;
+ int best = -1;
+
+ *in_range = false;
+
+ for (i = 0; i < gts->num_hwgain; i++) {
+ if (gain == gts->hwgain_table[i].gain) {
+ *in_range = true;
+ return gain;
+ }
+
+ if (gain > gts->hwgain_table[i].gain) {
+ if (!diff) {
+ diff = gain - gts->hwgain_table[i].gain;
+ best = i;
+ } else {
+ int tmp = gain - gts->hwgain_table[i].gain;
+
+ if (tmp < diff) {
+ diff = tmp;
+ best = i;
+ }
+ }
+ } else {
+ /*
+ * We found valid HW-gain which is greater than
+ * reference. So, unless we return a failure below we
+ * will have found an in-range gain
+ */
+ *in_range = true;
+ }
+ }
+ /* The requested gain was smaller than anything we support */
+ if (!diff) {
+ *in_range = false;
+
+ return -EINVAL;
+ }
+
+ return gts->hwgain_table[best].gain;
+}
+EXPORT_SYMBOL_NS_GPL(iio_find_closest_gain_low, IIO_GTS_HELPER);
+
+static int iio_gts_get_int_time_gain_multiplier_by_sel(struct iio_gts *gts,
+ int sel)
+{
+ const struct iio_itime_sel_mul *time;
+
+ time = iio_gts_find_itime_by_sel(gts, sel);
+ if (!time)
+ return -EINVAL;
+
+ return time->mul;
+}
+
+/**
+ * iio_gts_find_gain_for_scale_using_time - Find gain by time and scale
+ * @gts: Gain time scale descriptor
+ * @time_sel: Integration time selector corresponding to the time gain is
+ * searched for
+ * @scale_int: Integral part of the scale (typically val1)
+ * @scale_nano: Fractional part of the scale (nano or ppb)
+ * @gain: Pointer to value where gain is stored.
+ *
+ * In some cases the light sensors may want to find a gain setting which
+ * corresponds given scale and integration time. Sensors which fill the
+ * gain and time tables may use this helper to retrieve the gain.
+ *
+ * Return: 0 on success. -EINVAL if gain matching the parameters is not
+ * found.
+ */
+static int iio_gts_find_gain_for_scale_using_time(struct iio_gts *gts, int time_sel,
+ int scale_int, int scale_nano,
+ int *gain)
+{
+ u64 scale_linear;
+ int ret, mul;
+
+ ret = iio_gts_linearize(scale_int, scale_nano, NANO, &scale_linear);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_get_int_time_gain_multiplier_by_sel(gts, time_sel);
+ if (ret < 0)
+ return ret;
+
+ mul = ret;
+
+ ret = gain_get_scale_fraction(gts->max_scale, scale_linear, mul, gain);
+ if (ret)
+ return ret;
+
+ if (!iio_gts_valid_gain(gts, *gain))
+ return -EINVAL;
+
+ return 0;
+}
+
+/**
+ * iio_gts_find_gain_sel_for_scale_using_time - Fetch gain selector.
+ * @gts: Gain time scale descriptor
+ * @time_sel: Integration time selector corresponding to the time gain is
+ * searched for
+ * @scale_int: Integral part of the scale (typically val1)
+ * @scale_nano: Fractional part of the scale (nano or ppb)
+ * @gain_sel: Pointer to value where gain selector is stored.
+ *
+ * See iio_gts_find_gain_for_scale_using_time() for more information
+ */
+int iio_gts_find_gain_sel_for_scale_using_time(struct iio_gts *gts, int time_sel,
+ int scale_int, int scale_nano,
+ int *gain_sel)
+{
+ int gain, ret;
+
+ ret = iio_gts_find_gain_for_scale_using_time(gts, time_sel, scale_int,
+ scale_nano, &gain);
+ if (ret)
+ return ret;
+
+ ret = iio_gts_find_sel_by_gain(gts, gain);
+ if (ret < 0)
+ return ret;
+
+ *gain_sel = ret;
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_find_gain_sel_for_scale_using_time, IIO_GTS_HELPER);
+
+static int iio_gts_get_total_gain(struct iio_gts *gts, int gain, int time)
+{
+ const struct iio_itime_sel_mul *itime;
+
+ if (!iio_gts_valid_gain(gts, gain))
+ return -EINVAL;
+
+ if (!gts->num_itime)
+ return gain;
+
+ itime = iio_gts_find_itime_by_time(gts, time);
+ if (!itime)
+ return -EINVAL;
+
+ return gain * itime->mul;
+}
+
+static int iio_gts_get_scale_linear(struct iio_gts *gts, int gain, int time,
+ u64 *scale)
+{
+ int total_gain;
+ u64 tmp;
+
+ total_gain = iio_gts_get_total_gain(gts, gain, time);
+ if (total_gain < 0)
+ return total_gain;
+
+ tmp = gts->max_scale;
+
+ do_div(tmp, total_gain);
+
+ *scale = tmp;
+
+ return 0;
+}
+
+/**
+ * iio_gts_get_scale - get scale based on integration time and HW-gain
+ * @gts: Gain time scale descriptor
+ * @gain: HW-gain for which the scale is computed
+ * @time: Integration time for which the scale is computed
+ * @scale_int: Integral part of the scale (typically val1)
+ * @scale_nano: Fractional part of the scale (nano or ppb)
+ *
+ * Compute scale matching the integration time and HW-gain given as parameter.
+ *
+ * Return: 0 on success.
+ */
+int iio_gts_get_scale(struct iio_gts *gts, int gain, int time, int *scale_int,
+ int *scale_nano)
+{
+ u64 lin_scale;
+ int ret;
+
+ ret = iio_gts_get_scale_linear(gts, gain, time, &lin_scale);
+ if (ret)
+ return ret;
+
+ return iio_gts_delinearize(lin_scale, NANO, scale_int, scale_nano);
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_get_scale, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_find_new_gain_sel_by_old_gain_time - compensate for time change
+ * @gts: Gain time scale descriptor
+ * @old_gain: Previously set gain
+ * @old_time_sel: Selector corresponding previously set time
+ * @new_time_sel: Selector corresponding new time to be set
+ * @new_gain: Pointer to value where new gain is to be written
+ *
+ * We may want to mitigate the scale change caused by setting a new integration
+ * time (for a light sensor) by also updating the (HW)gain. This helper computes
+ * new gain value to maintain the scale with new integration time.
+ *
+ * Return: 0 if an exactly matching supported new gain was found. When a
+ * non-zero value is returned, the @new_gain will be set to a negative or
+ * positive value. The negative value means that no gain could be computed.
+ * Positive value will be the "best possible new gain there could be". There
+ * can be two reasons why finding the "best possible" new gain is not deemed
+ * successful. 1) This new value cannot be supported by the hardware. 2) The new
+ * gain required to maintain the scale would not be an integer. In this case,
+ * the "best possible" new gain will be a floored optimal gain, which may or
+ * may not be supported by the hardware.
+ */
+int iio_gts_find_new_gain_sel_by_old_gain_time(struct iio_gts *gts,
+ int old_gain, int old_time_sel,
+ int new_time_sel, int *new_gain)
+{
+ const struct iio_itime_sel_mul *itime_old, *itime_new;
+ u64 scale;
+ int ret;
+
+ *new_gain = -1;
+
+ itime_old = iio_gts_find_itime_by_sel(gts, old_time_sel);
+ if (!itime_old)
+ return -EINVAL;
+
+ itime_new = iio_gts_find_itime_by_sel(gts, new_time_sel);
+ if (!itime_new)
+ return -EINVAL;
+
+ ret = iio_gts_get_scale_linear(gts, old_gain, itime_old->time_us,
+ &scale);
+ if (ret)
+ return ret;
+
+ ret = gain_get_scale_fraction(gts->max_scale, scale, itime_new->mul,
+ new_gain);
+ if (ret)
+ return ret;
+
+ if (!iio_gts_valid_gain(gts, *new_gain))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_find_new_gain_sel_by_old_gain_time, IIO_GTS_HELPER);
+
+/**
+ * iio_gts_find_new_gain_by_old_gain_time - compensate for time change
+ * @gts: Gain time scale descriptor
+ * @old_gain: Previously set gain
+ * @old_time: Selector corresponding previously set time
+ * @new_time: Selector corresponding new time to be set
+ * @new_gain: Pointer to value where new gain is to be written
+ *
+ * We may want to mitigate the scale change caused by setting a new integration
+ * time (for a light sensor) by also updating the (HW)gain. This helper computes
+ * new gain value to maintain the scale with new integration time.
+ *
+ * Return: 0 if an exactly matching supported new gain was found. When a
+ * non-zero value is returned, the @new_gain will be set to a negative or
+ * positive value. The negative value means that no gain could be computed.
+ * Positive value will be the "best possible new gain there could be". There
+ * can be two reasons why finding the "best possible" new gain is not deemed
+ * successful. 1) This new value cannot be supported by the hardware. 2) The new
+ * gain required to maintain the scale would not be an integer. In this case,
+ * the "best possible" new gain will be a floored optimal gain, which may or
+ * may not be supported by the hardware.
+ */
+int iio_gts_find_new_gain_by_old_gain_time(struct iio_gts *gts, int old_gain,
+ int old_time, int new_time,
+ int *new_gain)
+{
+ const struct iio_itime_sel_mul *itime_new;
+ u64 scale;
+ int ret;
+
+ *new_gain = -1;
+
+ itime_new = iio_gts_find_itime_by_time(gts, new_time);
+ if (!itime_new)
+ return -EINVAL;
+
+ ret = iio_gts_get_scale_linear(gts, old_gain, old_time, &scale);
+ if (ret)
+ return ret;
+
+ ret = gain_get_scale_fraction(gts->max_scale, scale, itime_new->mul,
+ new_gain);
+ if (ret)
+ return ret;
+
+ if (!iio_gts_valid_gain(gts, *new_gain))
+ return -EINVAL;
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(iio_gts_find_new_gain_by_old_gain_time, IIO_GTS_HELPER);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matti Vaittinen <mazziesaccount@gmail.com>");
+MODULE_DESCRIPTION("IIO light sensor gain-time-scale helpers");
diff --git a/drivers/iio/industrialio-trigger.c b/drivers/iio/industrialio-trigger.c
index a2f3cc2f65ef..784dc1e00310 100644
--- a/drivers/iio/industrialio-trigger.c
+++ b/drivers/iio/industrialio-trigger.c
@@ -192,6 +192,12 @@ static void iio_trigger_notify_done_atomic(struct iio_trigger *trig)
schedule_work(&trig->reenable_work);
}
+/**
+ * iio_trigger_poll() - Call the IRQ trigger handler of the consumers
+ * @trig: trigger which occurred
+ *
+ * This function should only be called from a hard IRQ context.
+ */
void iio_trigger_poll(struct iio_trigger *trig)
{
int i;
@@ -216,7 +222,14 @@ irqreturn_t iio_trigger_generic_data_rdy_poll(int irq, void *private)
}
EXPORT_SYMBOL(iio_trigger_generic_data_rdy_poll);
-void iio_trigger_poll_chained(struct iio_trigger *trig)
+/**
+ * iio_trigger_poll_nested() - Call the threaded trigger handler of the
+ * consumers
+ * @trig: trigger which occurred
+ *
+ * This function should only be called from a kernel thread context.
+ */
+void iio_trigger_poll_nested(struct iio_trigger *trig)
{
int i;
@@ -231,7 +244,7 @@ void iio_trigger_poll_chained(struct iio_trigger *trig)
}
}
}
-EXPORT_SYMBOL(iio_trigger_poll_chained);
+EXPORT_SYMBOL(iio_trigger_poll_nested);
void iio_trigger_notify_done(struct iio_trigger *trig)
{
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
index 0d4447df7200..6fa31fcd71a1 100644
--- a/drivers/iio/light/Kconfig
+++ b/drivers/iio/light/Kconfig
@@ -289,6 +289,20 @@ config JSA1212
To compile this driver as a module, choose M here:
the module will be called jsa1212.
+config ROHM_BU27034
+ tristate "ROHM BU27034 ambient light sensor"
+ depends on I2C
+ select REGMAP_I2C
+ select IIO_GTS_HELPER
+ select IIO_BUFFER
+ select IIO_KFIFO_BUF
+ help
+ Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034
+ is an ambient light sesnor with 3 channels and 3 photo diodes capable
+ of detecting a very wide range of illuminance.
+ Typical application is adjusting LCD and backlight power of TVs and
+ mobile phones.
+
config RPR0521
tristate "ROHM RPR0521 ALS and proximity sensor driver"
depends on I2C
diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
index d74d2b5ff14c..985f6feaccd4 100644
--- a/drivers/iio/light/Makefile
+++ b/drivers/iio/light/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_MAX44009) += max44009.o
obj-$(CONFIG_NOA1305) += noa1305.o
obj-$(CONFIG_OPT3001) += opt3001.o
obj-$(CONFIG_PA12203001) += pa12203001.o
+obj-$(CONFIG_ROHM_BU27034) += rohm-bu27034.o
obj-$(CONFIG_RPR0521) += rpr0521.o
obj-$(CONFIG_SI1133) += si1133.o
obj-$(CONFIG_SI1145) += si1145.o
diff --git a/drivers/iio/light/acpi-als.c b/drivers/iio/light/acpi-als.c
index e1ff6f524f4b..2d91caf24dd0 100644
--- a/drivers/iio/light/acpi-als.c
+++ b/drivers/iio/light/acpi-als.c
@@ -108,7 +108,7 @@ static void acpi_als_notify(struct acpi_device *device, u32 event)
if (iio_buffer_enabled(indio_dev) && iio_trigger_using_own(indio_dev)) {
switch (event) {
case ACPI_ALS_NOTIFY_ILLUMINANCE:
- iio_trigger_poll_chained(als->trig);
+ iio_trigger_poll_nested(als->trig);
break;
default:
/* Unhandled event */
diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c
index 3dadace09fe2..176dcad6e8e8 100644
--- a/drivers/iio/light/max44009.c
+++ b/drivers/iio/light/max44009.c
@@ -527,6 +527,12 @@ static int max44009_probe(struct i2c_client *client)
return devm_iio_device_register(&client->dev, indio_dev);
}
+static const struct of_device_id max44009_of_match[] = {
+ { .compatible = "maxim,max44009" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max44009_of_match);
+
static const struct i2c_device_id max44009_id[] = {
{ "max44009", 0 },
{ }
@@ -536,18 +542,13 @@ MODULE_DEVICE_TABLE(i2c, max44009_id);
static struct i2c_driver max44009_driver = {
.driver = {
.name = MAX44009_DRV_NAME,
+ .of_match_table = max44009_of_match,
},
.probe_new = max44009_probe,
.id_table = max44009_id,
};
module_i2c_driver(max44009_driver);
-static const struct of_device_id max44009_of_match[] = {
- { .compatible = "maxim,max44009" },
- { }
-};
-MODULE_DEVICE_TABLE(of, max44009_of_match);
-
MODULE_AUTHOR("Robert Eshleman <bobbyeshleman@gmail.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("MAX44009 ambient light sensor driver");
diff --git a/drivers/iio/light/rohm-bu27034.c b/drivers/iio/light/rohm-bu27034.c
new file mode 100644
index 000000000000..e486dcf35eba
--- /dev/null
+++ b/drivers/iio/light/rohm-bu27034.c
@@ -0,0 +1,1497 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BU27034 ROHM Ambient Light Sensor
+ *
+ * Copyright (c) 2023, ROHM Semiconductor.
+ * https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/iio-gts-helper.h>
+#include <linux/iio/kfifo_buf.h>
+
+#define BU27034_REG_SYSTEM_CONTROL 0x40
+#define BU27034_MASK_SW_RESET BIT(7)
+#define BU27034_MASK_PART_ID GENMASK(5, 0)
+#define BU27034_ID 0x19
+#define BU27034_REG_MODE_CONTROL1 0x41
+#define BU27034_MASK_MEAS_MODE GENMASK(2, 0)
+
+#define BU27034_REG_MODE_CONTROL2 0x42
+#define BU27034_MASK_D01_GAIN GENMASK(7, 3)
+#define BU27034_MASK_D2_GAIN_HI GENMASK(7, 6)
+#define BU27034_MASK_D2_GAIN_LO GENMASK(2, 0)
+
+#define BU27034_REG_MODE_CONTROL3 0x43
+#define BU27034_REG_MODE_CONTROL4 0x44
+#define BU27034_MASK_MEAS_EN BIT(0)
+#define BU27034_MASK_VALID BIT(7)
+#define BU27034_REG_DATA0_LO 0x50
+#define BU27034_REG_DATA1_LO 0x52
+#define BU27034_REG_DATA2_LO 0x54
+#define BU27034_REG_DATA2_HI 0x55
+#define BU27034_REG_MANUFACTURER_ID 0x92
+#define BU27034_REG_MAX BU27034_REG_MANUFACTURER_ID
+
+/*
+ * The BU27034 does not have interrupt to trigger the data read when a
+ * measurement has finished. Hence we poll the VALID bit in a thread. We will
+ * try to wake the thread BU27034_MEAS_WAIT_PREMATURE_MS milliseconds before
+ * the expected sampling time to prevent the drifting.
+ *
+ * If we constantly wake up a bit too late we would eventually skip a sample.
+ * And because the sleep can't wake up _exactly_ at given time this would be
+ * inevitable even if the sensor clock would be perfectly phase-locked to CPU
+ * clock - which we can't say is the case.
+ *
+ * This is still fragile. No matter how big advance do we have, we will still
+ * risk of losing a sample because things can in a rainy-day scenario be
+ * delayed a lot. Yet, more we reserve the time for polling, more we also lose
+ * the performance by spending cycles polling the register. So, selecting this
+ * value is a balancing dance between severity of wasting CPU time and severity
+ * of losing samples.
+ *
+ * In most cases losing the samples is not _that_ crucial because light levels
+ * tend to change slowly.
+ *
+ * Other option that was pointed to me would be always sleeping 1/2 of the
+ * measurement time, checking the VALID bit and just sleeping again if the bit
+ * was not set. That should be pretty tolerant against missing samples due to
+ * the scheduling delays while also not wasting much of cycles for polling.
+ * Downside is that the time-stamps would be very inaccurate as the wake-up
+ * would not really be tied to the sensor toggling the valid bit. This would also
+ * result 'jumps' in the time-stamps when the delay drifted so that wake-up was
+ * performed during the consecutive wake-ups (Or, when sensor and CPU clocks
+ * were very different and scheduling the wake-ups was very close to given
+ * timeout - and when the time-outs were very close to the actual sensor
+ * sampling, Eg. once in a blue moon, two consecutive time-outs would occur
+ * without having a sample ready).
+ */
+#define BU27034_MEAS_WAIT_PREMATURE_MS 5
+#define BU27034_DATA_WAIT_TIME_US 1000
+#define BU27034_TOTAL_DATA_WAIT_TIME_US (BU27034_MEAS_WAIT_PREMATURE_MS * 1000)
+
+#define BU27034_RETRY_LIMIT 18
+
+enum {
+ BU27034_CHAN_ALS,
+ BU27034_CHAN_DATA0,
+ BU27034_CHAN_DATA1,
+ BU27034_CHAN_DATA2,
+ BU27034_NUM_CHANS
+};
+
+static const unsigned long bu27034_scan_masks[] = {
+ GENMASK(BU27034_CHAN_DATA2, BU27034_CHAN_ALS), 0
+};
+
+/*
+ * Available scales with gain 1x - 4096x, timings 55, 100, 200, 400 mS
+ * Time impacts to gain: 1x, 2x, 4x, 8x.
+ *
+ * => Max total gain is HWGAIN * gain by integration time (8 * 4096) = 32768
+ *
+ * Using NANO precision for scale we must use scale 64x corresponding gain 1x
+ * to avoid precision loss. (32x would result scale 976 562.5(nanos).
+ */
+#define BU27034_SCALE_1X 64
+
+/* See the data sheet for the "Gain Setting" table */
+#define BU27034_GSEL_1X 0x00 /* 00000 */
+#define BU27034_GSEL_4X 0x08 /* 01000 */
+#define BU27034_GSEL_16X 0x0a /* 01010 */
+#define BU27034_GSEL_32X 0x0b /* 01011 */
+#define BU27034_GSEL_64X 0x0c /* 01100 */
+#define BU27034_GSEL_256X 0x18 /* 11000 */
+#define BU27034_GSEL_512X 0x19 /* 11001 */
+#define BU27034_GSEL_1024X 0x1a /* 11010 */
+#define BU27034_GSEL_2048X 0x1b /* 11011 */
+#define BU27034_GSEL_4096X 0x1c /* 11100 */
+
+/* Available gain settings */
+static const struct iio_gain_sel_pair bu27034_gains[] = {
+ GAIN_SCALE_GAIN(1, BU27034_GSEL_1X),
+ GAIN_SCALE_GAIN(4, BU27034_GSEL_4X),
+ GAIN_SCALE_GAIN(16, BU27034_GSEL_16X),
+ GAIN_SCALE_GAIN(32, BU27034_GSEL_32X),
+ GAIN_SCALE_GAIN(64, BU27034_GSEL_64X),
+ GAIN_SCALE_GAIN(256, BU27034_GSEL_256X),
+ GAIN_SCALE_GAIN(512, BU27034_GSEL_512X),
+ GAIN_SCALE_GAIN(1024, BU27034_GSEL_1024X),
+ GAIN_SCALE_GAIN(2048, BU27034_GSEL_2048X),
+ GAIN_SCALE_GAIN(4096, BU27034_GSEL_4096X),
+};
+
+/*
+ * The IC has 5 modes for sampling time. 5 mS mode is exceptional as it limits
+ * the data collection to data0-channel only and cuts the supported range to
+ * 10 bit. It is not supported by the driver.
+ *
+ * "normal" modes are 55, 100, 200 and 400 mS modes - which do have direct
+ * multiplying impact to the register values (similar to gain).
+ *
+ * This means that if meas-mode is changed for example from 400 => 200,
+ * the scale is doubled. Eg, time impact to total gain is x1, x2, x4, x8.
+ */
+#define BU27034_MEAS_MODE_100MS 0
+#define BU27034_MEAS_MODE_55MS 1
+#define BU27034_MEAS_MODE_200MS 2
+#define BU27034_MEAS_MODE_400MS 4
+
+static const struct iio_itime_sel_mul bu27034_itimes[] = {
+ GAIN_SCALE_ITIME_US(400000, BU27034_MEAS_MODE_400MS, 8),
+ GAIN_SCALE_ITIME_US(200000, BU27034_MEAS_MODE_200MS, 4),
+ GAIN_SCALE_ITIME_US(100000, BU27034_MEAS_MODE_100MS, 2),
+ GAIN_SCALE_ITIME_US(55000, BU27034_MEAS_MODE_55MS, 1),
+};
+
+#define BU27034_CHAN_DATA(_name, _ch2) \
+{ \
+ .type = IIO_INTENSITY, \
+ .channel = BU27034_CHAN_##_name, \
+ .channel2 = (_ch2), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_separate_available = BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME), \
+ .info_mask_shared_by_all_available = \
+ BIT(IIO_CHAN_INFO_INT_TIME), \
+ .address = BU27034_REG_##_name##_LO, \
+ .scan_index = BU27034_CHAN_##_name, \
+ .scan_type = { \
+ .sign = 'u', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+ .indexed = 1, \
+}
+
+static const struct iio_chan_spec bu27034_channels[] = {
+ {
+ .type = IIO_LIGHT,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ .channel = BU27034_CHAN_ALS,
+ .scan_index = BU27034_CHAN_ALS,
+ .scan_type = {
+ .sign = 'u',
+ .realbits = 32,
+ .storagebits = 32,
+ .endianness = IIO_CPU,
+ },
+ },
+ /*
+ * The BU27034 DATA0 and DATA1 channels are both on the visible light
+ * area (mostly). The data0 sensitivity peaks at 500nm, DATA1 at 600nm.
+ * These wave lengths are pretty much on the border of colours making
+ * these a poor candidates for R/G/B standardization. Hence they're both
+ * marked as clear channels
+ */
+ BU27034_CHAN_DATA(DATA0, IIO_MOD_LIGHT_CLEAR),
+ BU27034_CHAN_DATA(DATA1, IIO_MOD_LIGHT_CLEAR),
+ BU27034_CHAN_DATA(DATA2, IIO_MOD_LIGHT_IR),
+ IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+struct bu27034_data {
+ struct regmap *regmap;
+ struct device *dev;
+ /*
+ * Protect gain and time during scale adjustment and data reading.
+ * Protect measurement enabling/disabling.
+ */
+ struct mutex mutex;
+ struct iio_gts gts;
+ struct task_struct *task;
+ __le16 raw[3];
+ struct {
+ u32 mlux;
+ __le16 channels[3];
+ s64 ts __aligned(8);
+ } scan;
+};
+
+struct bu27034_result {
+ u16 ch0;
+ u16 ch1;
+ u16 ch2;
+};
+
+static const struct regmap_range bu27034_volatile_ranges[] = {
+ {
+ .range_min = BU27034_REG_MODE_CONTROL4,
+ .range_max = BU27034_REG_MODE_CONTROL4,
+ }, {
+ .range_min = BU27034_REG_DATA0_LO,
+ .range_max = BU27034_REG_DATA2_HI,
+ },
+};
+
+static const struct regmap_access_table bu27034_volatile_regs = {
+ .yes_ranges = &bu27034_volatile_ranges[0],
+ .n_yes_ranges = ARRAY_SIZE(bu27034_volatile_ranges),
+};
+
+static const struct regmap_range bu27034_read_only_ranges[] = {
+ {
+ .range_min = BU27034_REG_DATA0_LO,
+ .range_max = BU27034_REG_DATA2_HI,
+ }, {
+ .range_min = BU27034_REG_MANUFACTURER_ID,
+ .range_max = BU27034_REG_MANUFACTURER_ID,
+ }
+};
+
+static const struct regmap_access_table bu27034_ro_regs = {
+ .no_ranges = &bu27034_read_only_ranges[0],
+ .n_no_ranges = ARRAY_SIZE(bu27034_read_only_ranges),
+};
+
+static const struct regmap_config bu27034_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = BU27034_REG_MAX,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_table = &bu27034_volatile_regs,
+ .wr_table = &bu27034_ro_regs,
+};
+
+struct bu27034_gain_check {
+ int old_gain;
+ int new_gain;
+ int chan;
+};
+
+static int bu27034_get_gain_sel(struct bu27034_data *data, int chan)
+{
+ int ret, val;
+
+ switch (chan) {
+ case BU27034_CHAN_DATA0:
+ case BU27034_CHAN_DATA1:
+ {
+ int reg[] = {
+ [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2,
+ [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3,
+ };
+ ret = regmap_read(data->regmap, reg[chan], &val);
+ if (ret)
+ return ret;
+
+ return FIELD_GET(BU27034_MASK_D01_GAIN, val);
+ }
+ case BU27034_CHAN_DATA2:
+ {
+ int d2_lo_bits = fls(BU27034_MASK_D2_GAIN_LO);
+
+ ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL2, &val);
+ if (ret)
+ return ret;
+
+ /*
+ * The data2 channel gain is composed by 5 non continuous bits
+ * [7:6], [2:0]. Thus when we combine the 5-bit 'selector'
+ * from register value we must right shift the high bits by 3.
+ */
+ return FIELD_GET(BU27034_MASK_D2_GAIN_HI, val) << d2_lo_bits |
+ FIELD_GET(BU27034_MASK_D2_GAIN_LO, val);
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bu27034_get_gain(struct bu27034_data *data, int chan, int *gain)
+{
+ int ret, sel;
+
+ ret = bu27034_get_gain_sel(data, chan);
+ if (ret < 0)
+ return ret;
+
+ sel = ret;
+
+ ret = iio_gts_find_gain_by_sel(&data->gts, sel);
+ if (ret < 0) {
+ dev_err(data->dev, "chan %u: unknown gain value 0x%x\n", chan,
+ sel);
+
+ return ret;
+ }
+
+ *gain = ret;
+
+ return 0;
+}
+
+static int bu27034_get_int_time(struct bu27034_data *data)
+{
+ int ret, sel;
+
+ ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel);
+ if (ret)
+ return ret;
+
+ return iio_gts_find_int_time_by_sel(&data->gts,
+ sel & BU27034_MASK_MEAS_MODE);
+}
+
+static int _bu27034_get_scale(struct bu27034_data *data, int channel, int *val,
+ int *val2)
+{
+ int gain, ret;
+
+ ret = bu27034_get_gain(data, channel, &gain);
+ if (ret)
+ return ret;
+
+ ret = bu27034_get_int_time(data);
+ if (ret < 0)
+ return ret;
+
+ return iio_gts_get_scale(&data->gts, gain, ret, val, val2);
+}
+
+static int bu27034_get_scale(struct bu27034_data *data, int channel, int *val,
+ int *val2)
+{
+ int ret;
+
+ if (channel == BU27034_CHAN_ALS) {
+ *val = 0;
+ *val2 = 1000;
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+
+ mutex_lock(&data->mutex);
+ ret = _bu27034_get_scale(data, channel, val, val2);
+ mutex_unlock(&data->mutex);
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT_PLUS_NANO;
+}
+
+/* Caller should hold the lock to protect lux reading */
+static int bu27034_write_gain_sel(struct bu27034_data *data, int chan, int sel)
+{
+ static const int reg[] = {
+ [BU27034_CHAN_DATA0] = BU27034_REG_MODE_CONTROL2,
+ [BU27034_CHAN_DATA1] = BU27034_REG_MODE_CONTROL3,
+ };
+ int mask, val;
+
+ if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1)
+ return -EINVAL;
+
+ val = FIELD_PREP(BU27034_MASK_D01_GAIN, sel);
+
+ mask = BU27034_MASK_D01_GAIN;
+
+ if (chan == BU27034_CHAN_DATA0) {
+ /*
+ * We keep the same gain for channel 2 as we set for channel 0
+ * We can't allow them to be individually controlled because
+ * setting one will impact also the other. Also, if we don't
+ * always update both gains we may result unsupported bit
+ * combinations.
+ *
+ * This is not nice but this is yet another place where the
+ * user space must be prepared to surprizes. Namely, see chan 2
+ * gain changed when chan 0 gain is changed.
+ *
+ * This is not fatal for most users though. I don't expect the
+ * channel 2 to be used in any generic cases - the intensity
+ * values provided by the sensor for IR area are not openly
+ * documented. Also, channel 2 is not used for visible light.
+ *
+ * So, if there is application which is written to utilize the
+ * channel 2 - then it is probably specifically targeted to this
+ * sensor and knows how to utilize those values. It is safe to
+ * hope such user can also cope with the gain changes.
+ */
+ mask |= BU27034_MASK_D2_GAIN_LO;
+
+ /*
+ * The D2 gain bits are directly the lowest bits of selector.
+ * Just do add those bits to the value
+ */
+ val |= sel & BU27034_MASK_D2_GAIN_LO;
+ }
+
+ return regmap_update_bits(data->regmap, reg[chan], mask, val);
+}
+
+static int bu27034_set_gain(struct bu27034_data *data, int chan, int gain)
+{
+ int ret;
+
+ /*
+ * We don't allow setting channel 2 gain as it messes up the
+ * gain for channel 0 - which shares the high bits
+ */
+ if (chan != BU27034_CHAN_DATA0 && chan != BU27034_CHAN_DATA1)
+ return -EINVAL;
+
+ ret = iio_gts_find_sel_by_gain(&data->gts, gain);
+ if (ret < 0)
+ return ret;
+
+ return bu27034_write_gain_sel(data, chan, ret);
+}
+
+/* Caller should hold the lock to protect data->int_time */
+static int bu27034_set_int_time(struct bu27034_data *data, int time)
+{
+ int ret;
+
+ ret = iio_gts_find_sel_by_int_time(&data->gts, time);
+ if (ret < 0)
+ return ret;
+
+ return regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1,
+ BU27034_MASK_MEAS_MODE, ret);
+}
+
+/*
+ * We try to change the time in such way that the scale is maintained for
+ * given channels by adjusting gain so that it compensates the time change.
+ */
+static int bu27034_try_set_int_time(struct bu27034_data *data, int time_us)
+{
+ struct bu27034_gain_check gains[] = {
+ { .chan = BU27034_CHAN_DATA0 },
+ { .chan = BU27034_CHAN_DATA1 },
+ };
+ int numg = ARRAY_SIZE(gains);
+ int ret, int_time_old, i;
+
+ mutex_lock(&data->mutex);
+ ret = bu27034_get_int_time(data);
+ if (ret < 0)
+ goto unlock_out;
+
+ int_time_old = ret;
+
+ if (!iio_gts_valid_time(&data->gts, time_us)) {
+ dev_err(data->dev, "Unsupported integration time %u\n",
+ time_us);
+ ret = -EINVAL;
+
+ goto unlock_out;
+ }
+
+ if (time_us == int_time_old) {
+ ret = 0;
+ goto unlock_out;
+ }
+
+ for (i = 0; i < numg; i++) {
+ ret = bu27034_get_gain(data, gains[i].chan, &gains[i].old_gain);
+ if (ret)
+ goto unlock_out;
+
+ ret = iio_gts_find_new_gain_by_old_gain_time(&data->gts,
+ gains[i].old_gain,
+ int_time_old, time_us,
+ &gains[i].new_gain);
+ if (ret) {
+ int scale1, scale2;
+ bool ok;
+
+ _bu27034_get_scale(data, gains[i].chan, &scale1, &scale2);
+ dev_dbg(data->dev,
+ "chan %u, can't support time %u with scale %u %u\n",
+ gains[i].chan, time_us, scale1, scale2);
+
+ if (gains[i].new_gain < 0)
+ goto unlock_out;
+
+ /*
+ * If caller requests for integration time change and we
+ * can't support the scale - then the caller should be
+ * prepared to 'pick up the pieces and deal with the
+ * fact that the scale changed'.
+ */
+ ret = iio_find_closest_gain_low(&data->gts,
+ gains[i].new_gain, &ok);
+
+ if (!ok)
+ dev_dbg(data->dev,
+ "optimal gain out of range for chan %u\n",
+ gains[i].chan);
+
+ if (ret < 0) {
+ dev_dbg(data->dev,
+ "Total gain increase. Risk of saturation");
+ ret = iio_gts_get_min_gain(&data->gts);
+ if (ret < 0)
+ goto unlock_out;
+ }
+ dev_dbg(data->dev, "chan %u scale changed\n",
+ gains[i].chan);
+ gains[i].new_gain = ret;
+ dev_dbg(data->dev, "chan %u new gain %u\n",
+ gains[i].chan, gains[i].new_gain);
+ }
+ }
+
+ for (i = 0; i < numg; i++) {
+ ret = bu27034_set_gain(data, gains[i].chan, gains[i].new_gain);
+ if (ret)
+ goto unlock_out;
+ }
+
+ ret = bu27034_set_int_time(data, time_us);
+
+unlock_out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int bu27034_set_scale(struct bu27034_data *data, int chan,
+ int val, int val2)
+{
+ int ret, time_sel, gain_sel, i;
+ bool found = false;
+
+ if (chan == BU27034_CHAN_DATA2)
+ return -EINVAL;
+
+ if (chan == BU27034_CHAN_ALS) {
+ if (val == 0 && val2 == 1000)
+ return 0;
+
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->mutex);
+ ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &time_sel);
+ if (ret)
+ goto unlock_out;
+
+ ret = iio_gts_find_gain_sel_for_scale_using_time(&data->gts, time_sel,
+ val, val2 * 1000, &gain_sel);
+ if (ret) {
+ /*
+ * Could not support scale with given time. Need to change time.
+ * We still want to maintain the scale for all channels
+ */
+ struct bu27034_gain_check gain;
+ int new_time_sel;
+
+ /*
+ * Populate information for the other channel which should also
+ * maintain the scale. (Due to the HW limitations the chan2
+ * gets the same gain as chan0, so we only need to explicitly
+ * set the chan 0 and 1).
+ */
+ if (chan == BU27034_CHAN_DATA0)
+ gain.chan = BU27034_CHAN_DATA1;
+ else if (chan == BU27034_CHAN_DATA1)
+ gain.chan = BU27034_CHAN_DATA0;
+
+ ret = bu27034_get_gain(data, gain.chan, &gain.old_gain);
+ if (ret)
+ goto unlock_out;
+
+ /*
+ * Iterate through all the times to see if we find one which
+ * can support requested scale for requested channel, while
+ * maintaining the scale for other channels
+ */
+ for (i = 0; i < data->gts.num_itime; i++) {
+ new_time_sel = data->gts.itime_table[i].sel;
+
+ if (new_time_sel == time_sel)
+ continue;
+
+ /* Can we provide requested scale with this time? */
+ ret = iio_gts_find_gain_sel_for_scale_using_time(
+ &data->gts, new_time_sel, val, val2 * 1000,
+ &gain_sel);
+ if (ret)
+ continue;
+
+ /* Can the other channel(s) maintain scale? */
+ ret = iio_gts_find_new_gain_sel_by_old_gain_time(
+ &data->gts, gain.old_gain, time_sel,
+ new_time_sel, &gain.new_gain);
+ if (!ret) {
+ /* Yes - we found suitable time */
+ found = true;
+ break;
+ }
+ }
+ if (!found) {
+ dev_dbg(data->dev,
+ "Can't set scale maintaining other channels\n");
+ ret = -EINVAL;
+
+ goto unlock_out;
+ }
+
+ ret = bu27034_set_gain(data, gain.chan, gain.new_gain);
+ if (ret)
+ goto unlock_out;
+
+ ret = regmap_update_bits(data->regmap, BU27034_REG_MODE_CONTROL1,
+ BU27034_MASK_MEAS_MODE, new_time_sel);
+ if (ret)
+ goto unlock_out;
+ }
+
+ ret = bu27034_write_gain_sel(data, chan, gain_sel);
+unlock_out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+/*
+ * for (D1/D0 < 0.87):
+ * lx = 0.004521097 * D1 - 0.002663996 * D0 +
+ * 0.00012213 * D1 * D1 / D0
+ *
+ * => 115.7400832 * ch1 / gain1 / mt -
+ * 68.1982976 * ch0 / gain0 / mt +
+ * 0.00012213 * 25600 * (ch1 / gain1 / mt) * 25600 *
+ * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt)
+ *
+ * A = 0.00012213 * 25600 * (ch1 /gain1 / mt) * 25600 *
+ * (ch1 /gain1 / mt) / (25600 * ch0 / gain0 / mt)
+ * => 0.00012213 * 25600 * (ch1 /gain1 / mt) *
+ * (ch1 /gain1 / mt) / (ch0 / gain0 / mt)
+ * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) /
+ * (ch0 / gain0)
+ * => 0.00012213 * 25600 * (ch1 / gain1) * (ch1 /gain1 / mt) *
+ * gain0 / ch0
+ * => 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt /ch0
+ *
+ * lx = (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) /
+ * mt + A
+ * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0) /
+ * mt + 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / mt /
+ * ch0
+ *
+ * => (115.7400832 * ch1 / gain1 - 68.1982976 * ch0 / gain0 +
+ * 3.126528 * ch1 * ch1 * gain0 / gain1 / gain1 / ch0) /
+ * mt
+ *
+ * For (0.87 <= D1/D0 < 1.00)
+ * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 0.87) * (0.385) + 1)
+ * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 *
+ * 100 * ch1 / gain1 / mt) * ((D1/D0 - 0.87) * (0.385) + 1)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * ((D1/D0 - 0.87) * (0.385) + 1)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * (0.385 * D1/D0 - 0.66505)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * (0.385 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) - 0.66505)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * (9856 * ch1 / gain1 / mt / (25600 * ch0 / gain0 / mt) + 0.66505)
+ * => 13.118336 * ch1 / (gain1 * mt)
+ * + 22.66064768 * ch0 / (gain0 * mt)
+ * + 8931.90144 * ch1 * ch1 * gain0 /
+ * (25600 * ch0 * gain1 * gain1 * mt)
+ * + 0.602694912 * ch1 / (gain1 * mt)
+ *
+ * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1)
+ * + 22.66064768 * ch0 / gain0
+ * + 13.721030912 * ch1 / gain1
+ * ] / mt
+ *
+ * For (D1/D0 >= 1.00)
+ *
+ * lx = (0.001331* D0 + 0.0000354 * D1) * ((D1/D0 – 2.0) * (-0.05) + 1)
+ * => (0.001331* D0 + 0.0000354 * D1) * (-0.05D1/D0 + 1.1)
+ * => (0.001331 * 256 * 100 * ch0 / gain0 / mt + 0.0000354 * 256 *
+ * 100 * ch1 / gain1 / mt) * (-0.05D1/D0 + 1.1)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * (-0.05 * 256 * 100 * ch1 / gain1 / mt / (256 * 100 * ch0 / gain0 / mt) + 1.1)
+ * => (34.0736 * ch0 / gain0 / mt + 0.90624 * ch1 / gain1 / mt) *
+ * (-1280 * ch1 / (gain1 * mt * 25600 * ch0 / gain0 / mt) + 1.1)
+ * => (34.0736 * ch0 * -1280 * ch1 * gain0 * mt /( gain0 * mt * gain1 * mt * 25600 * ch0)
+ * + 34.0736 * 1.1 * ch0 / (gain0 * mt)
+ * + 0.90624 * ch1 * -1280 * ch1 *gain0 * mt / (gain1 * mt *gain1 * mt * 25600 * ch0)
+ * + 1.1 * 0.90624 * ch1 / (gain1 * mt)
+ * => -43614.208 * ch1 / (gain1 * mt * 25600)
+ * + 37.48096 ch0 / (gain0 * mt)
+ * - 1159.9872 * ch1 * ch1 * gain0 / (gain1 * gain1 * mt * 25600 * ch0)
+ * + 0.996864 ch1 / (gain1 * mt)
+ * => [
+ * - 0.045312 * ch1 * ch1 * gain0 / (gain1 * gain1 * ch0)
+ * - 0.706816 * ch1 / gain1
+ * + 37.48096 ch0 /gain0
+ * ] * mt
+ *
+ *
+ * So, the first case (D1/D0 < 0.87) can be computed to a form:
+ *
+ * lx = (3.126528 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) +
+ * 115.7400832 * ch1 / gain1 +
+ * -68.1982976 * ch0 / gain0
+ * / mt
+ *
+ * Second case (0.87 <= D1/D0 < 1.00) goes to form:
+ *
+ * => [0.3489024 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) +
+ * 13.721030912 * ch1 / gain1 +
+ * 22.66064768 * ch0 / gain0
+ * ] / mt
+ *
+ * Third case (D1/D0 >= 1.00) goes to form:
+ * => [-0.045312 * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) +
+ * -0.706816 * ch1 / gain1 +
+ * 37.48096 ch0 /(gain0
+ * ] / mt
+ *
+ * This can be unified to format:
+ * lx = [
+ * A * ch1 * ch1 * gain0 / (ch0 * gain1 * gain1) +
+ * B * ch1 / gain1 +
+ * C * ch0 / gain0
+ * ] / mt
+ *
+ * For case 1:
+ * A = 3.126528,
+ * B = 115.7400832
+ * C = -68.1982976
+ *
+ * For case 2:
+ * A = 0.3489024
+ * B = 13.721030912
+ * C = 22.66064768
+ *
+ * For case 3:
+ * A = -0.045312
+ * B = -0.706816
+ * C = 37.48096
+ */
+
+struct bu27034_lx_coeff {
+ unsigned int A;
+ unsigned int B;
+ unsigned int C;
+ /* Indicate which of the coefficients above are negative */
+ bool is_neg[3];
+};
+
+static inline u64 gain_mul_div_helper(u64 val, unsigned int gain,
+ unsigned int div)
+{
+ /*
+ * Max gain for a channel is 4096. The max u64 (0xffffffffffffffffULL)
+ * divided by 4096 is 0xFFFFFFFFFFFFF (GENMASK_ULL(51, 0)) (floored).
+ * Thus, the 0xFFFFFFFFFFFFF is the largest value we can safely multiply
+ * with the gain, no matter what gain is set.
+ *
+ * So, multiplication with max gain may overflow if val is greater than
+ * 0xFFFFFFFFFFFFF (52 bits set)..
+ *
+ * If this is the case we divide first.
+ */
+ if (val < GENMASK_ULL(51, 0)) {
+ val *= gain;
+ do_div(val, div);
+ } else {
+ do_div(val, div);
+ val *= gain;
+ }
+
+ return val;
+}
+
+static u64 bu27034_fixp_calc_t1_64bit(unsigned int coeff, unsigned int ch0,
+ unsigned int ch1, unsigned int gain0,
+ unsigned int gain1)
+{
+ unsigned int helper;
+ u64 helper64;
+
+ helper64 = (u64)coeff * (u64)ch1 * (u64)ch1;
+
+ helper = gain1 * gain1;
+ if (helper > ch0) {
+ do_div(helper64, helper);
+
+ return gain_mul_div_helper(helper64, gain0, ch0);
+ }
+
+ do_div(helper64, ch0);
+
+ return gain_mul_div_helper(helper64, gain0, helper);
+
+}
+
+static u64 bu27034_fixp_calc_t1(unsigned int coeff, unsigned int ch0,
+ unsigned int ch1, unsigned int gain0,
+ unsigned int gain1)
+{
+ unsigned int helper, tmp;
+
+ /*
+ * Here we could overflow even the 64bit value. Hence we
+ * multiply with gain0 only after the divisions - even though
+ * it may result loss of accuracy
+ */
+ helper = coeff * ch1 * ch1;
+ tmp = helper * gain0;
+
+ helper = ch1 * ch1;
+
+ if (check_mul_overflow(helper, coeff, &helper))
+ return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1);
+
+ if (check_mul_overflow(helper, gain0, &tmp))
+ return bu27034_fixp_calc_t1_64bit(coeff, ch0, ch1, gain0, gain1);
+
+ return tmp / (gain1 * gain1) / ch0;
+
+}
+
+static u64 bu27034_fixp_calc_t23(unsigned int coeff, unsigned int ch,
+ unsigned int gain)
+{
+ unsigned int helper;
+ u64 helper64;
+
+ if (!check_mul_overflow(coeff, ch, &helper))
+ return helper / gain;
+
+ helper64 = (u64)coeff * (u64)ch;
+ do_div(helper64, gain);
+
+ return helper64;
+}
+
+static int bu27034_fixp_calc_lx(unsigned int ch0, unsigned int ch1,
+ unsigned int gain0, unsigned int gain1,
+ unsigned int meastime, int coeff_idx)
+{
+ static const struct bu27034_lx_coeff coeff[] = {
+ {
+ .A = 31265280, /* 3.126528 */
+ .B = 1157400832, /*115.7400832 */
+ .C = 681982976, /* -68.1982976 */
+ .is_neg = {false, false, true},
+ }, {
+ .A = 3489024, /* 0.3489024 */
+ .B = 137210309, /* 13.721030912 */
+ .C = 226606476, /* 22.66064768 */
+ /* All terms positive */
+ }, {
+ .A = 453120, /* -0.045312 */
+ .B = 7068160, /* -0.706816 */
+ .C = 374809600, /* 37.48096 */
+ .is_neg = {true, true, false},
+ }
+ };
+ const struct bu27034_lx_coeff *c = &coeff[coeff_idx];
+ u64 res = 0, terms[3];
+ int i;
+
+ if (coeff_idx >= ARRAY_SIZE(coeff))
+ return -EINVAL;
+
+ terms[0] = bu27034_fixp_calc_t1(c->A, ch0, ch1, gain0, gain1);
+ terms[1] = bu27034_fixp_calc_t23(c->B, ch1, gain1);
+ terms[2] = bu27034_fixp_calc_t23(c->C, ch0, gain0);
+
+ /* First, add positive terms */
+ for (i = 0; i < 3; i++)
+ if (!c->is_neg[i])
+ res += terms[i];
+
+ /* No positive term => zero lux */
+ if (!res)
+ return 0;
+
+ /* Then, subtract negative terms (if any) */
+ for (i = 0; i < 3; i++)
+ if (c->is_neg[i]) {
+ /*
+ * If the negative term is greater than positive - then
+ * the darkness has taken over and we are all doomed! Eh,
+ * I mean, then we can just return 0 lx and go out
+ */
+ if (terms[i] >= res)
+ return 0;
+
+ res -= terms[i];
+ }
+
+ meastime *= 10;
+ do_div(res, meastime);
+
+ return (int) res;
+}
+
+static bool bu27034_has_valid_sample(struct bu27034_data *data)
+{
+ int ret, val;
+
+ ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL4, &val);
+ if (ret) {
+ dev_err(data->dev, "Read failed %d\n", ret);
+
+ return false;
+ }
+
+ return val & BU27034_MASK_VALID;
+}
+
+/*
+ * Reading the register where VALID bit is clears this bit. (So does changing
+ * any gain / integration time configuration registers) The bit gets
+ * set when we have acquired new data. We use this bit to indicate data
+ * validity.
+ */
+static void bu27034_invalidate_read_data(struct bu27034_data *data)
+{
+ bu27034_has_valid_sample(data);
+}
+
+static int bu27034_read_result(struct bu27034_data *data, int chan, int *res)
+{
+ int reg[] = {
+ [BU27034_CHAN_DATA0] = BU27034_REG_DATA0_LO,
+ [BU27034_CHAN_DATA1] = BU27034_REG_DATA1_LO,
+ [BU27034_CHAN_DATA2] = BU27034_REG_DATA2_LO,
+ };
+ int valid, ret;
+ __le16 val;
+
+ ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4,
+ valid, (valid & BU27034_MASK_VALID),
+ BU27034_DATA_WAIT_TIME_US, 0);
+ if (ret)
+ return ret;
+
+ ret = regmap_bulk_read(data->regmap, reg[chan], &val, sizeof(val));
+ if (ret)
+ return ret;
+
+ *res = le16_to_cpu(val);
+
+ return 0;
+}
+
+static int bu27034_get_result_unlocked(struct bu27034_data *data, __le16 *res,
+ int size)
+{
+ int ret = 0, retry_cnt = 0;
+
+retry:
+ /* Get new value from sensor if data is ready */
+ if (bu27034_has_valid_sample(data)) {
+ ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO,
+ res, size);
+ if (ret)
+ return ret;
+
+ bu27034_invalidate_read_data(data);
+ } else {
+ /* No new data in sensor. Wait and retry */
+ retry_cnt++;
+
+ if (retry_cnt > BU27034_RETRY_LIMIT) {
+ dev_err(data->dev, "No data from sensor\n");
+
+ return -ETIMEDOUT;
+ }
+
+ msleep(25);
+
+ goto retry;
+ }
+
+ return ret;
+}
+
+static int bu27034_meas_set(struct bu27034_data *data, bool en)
+{
+ if (en)
+ return regmap_set_bits(data->regmap, BU27034_REG_MODE_CONTROL4,
+ BU27034_MASK_MEAS_EN);
+
+ return regmap_clear_bits(data->regmap, BU27034_REG_MODE_CONTROL4,
+ BU27034_MASK_MEAS_EN);
+}
+
+static int bu27034_get_single_result(struct bu27034_data *data, int chan,
+ int *val)
+{
+ int ret;
+
+ if (chan < BU27034_CHAN_DATA0 || chan > BU27034_CHAN_DATA2)
+ return -EINVAL;
+
+ ret = bu27034_meas_set(data, true);
+ if (ret)
+ return ret;
+
+ ret = bu27034_get_int_time(data);
+ if (ret < 0)
+ return ret;
+
+ msleep(ret / 1000);
+
+ return bu27034_read_result(data, chan, val);
+}
+
+/*
+ * The formula given by vendor for computing luxes out of data0 and data1
+ * (in open air) is as follows:
+ *
+ * Let's mark:
+ * D0 = data0/ch0_gain/meas_time_ms * 25600
+ * D1 = data1/ch1_gain/meas_time_ms * 25600
+ *
+ * Then:
+ * if (D1/D0 < 0.87)
+ * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 3.45 + 1)
+ * else if (D1/D0 < 1)
+ * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 0.87) * 0.385 + 1)
+ * else
+ * lx = (0.001331 * D0 + 0.0000354 * D1) * ((D1 / D0 - 2) * -0.05 + 1)
+ *
+ * We use it here. Users who have for example some colored lens
+ * need to modify the calculation but I hope this gives a starting point for
+ * those working with such devices.
+ */
+
+static int bu27034_calc_mlux(struct bu27034_data *data, __le16 *res, int *val)
+{
+ unsigned int gain0, gain1, meastime;
+ unsigned int d1_d0_ratio_scaled;
+ u16 ch0, ch1;
+ u64 helper64;
+ int ret;
+
+ /*
+ * We return 0 lux if calculation fails. This should be reasonably
+ * easy to spot from the buffers especially if raw-data channels show
+ * valid values
+ */
+ *val = 0;
+
+ ch0 = max_t(u16, 1, le16_to_cpu(res[0]));
+ ch1 = max_t(u16, 1, le16_to_cpu(res[1]));
+
+ ret = bu27034_get_gain(data, BU27034_CHAN_DATA0, &gain0);
+ if (ret)
+ return ret;
+
+ ret = bu27034_get_gain(data, BU27034_CHAN_DATA1, &gain1);
+ if (ret)
+ return ret;
+
+ ret = bu27034_get_int_time(data);
+ if (ret < 0)
+ return ret;
+
+ meastime = ret;
+
+ d1_d0_ratio_scaled = (unsigned int)ch1 * (unsigned int)gain0 * 100;
+ helper64 = (u64)ch1 * (u64)gain0 * 100LLU;
+
+ if (helper64 != d1_d0_ratio_scaled) {
+ unsigned int div = (unsigned int)ch0 * gain1;
+
+ do_div(helper64, div);
+ d1_d0_ratio_scaled = helper64;
+ } else {
+ d1_d0_ratio_scaled /= ch0 * gain1;
+ }
+
+ if (d1_d0_ratio_scaled < 87)
+ ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 0);
+ else if (d1_d0_ratio_scaled < 100)
+ ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 1);
+ else
+ ret = bu27034_fixp_calc_lx(ch0, ch1, gain0, gain1, meastime, 2);
+
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+
+ return 0;
+
+}
+
+static int bu27034_get_mlux(struct bu27034_data *data, int chan, int *val)
+{
+ __le16 res[3];
+ int ret;
+
+ ret = bu27034_meas_set(data, true);
+ if (ret)
+ return ret;
+
+ ret = bu27034_get_result_unlocked(data, &res[0], sizeof(res));
+ if (ret)
+ return ret;
+
+ ret = bu27034_calc_mlux(data, res, val);
+ if (ret)
+ return ret;
+
+ ret = bu27034_meas_set(data, false);
+ if (ret)
+ dev_err(data->dev, "failed to disable measurement\n");
+
+ return 0;
+}
+
+static int bu27034_read_raw(struct iio_dev *idev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ struct bu27034_data *data = iio_priv(idev);
+ int ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ *val = bu27034_get_int_time(data);
+ if (*val < 0)
+ return *val;
+
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ return bu27034_get_scale(data, chan->channel, val, val2);
+
+ case IIO_CHAN_INFO_RAW:
+ {
+ int (*result_get)(struct bu27034_data *data, int chan, int *val);
+
+ if (chan->type == IIO_INTENSITY)
+ result_get = bu27034_get_single_result;
+ else if (chan->type == IIO_LIGHT)
+ result_get = bu27034_get_mlux;
+ else
+ return -EINVAL;
+
+ /* Don't mess with measurement enabling while buffering */
+ ret = iio_device_claim_direct_mode(idev);
+ if (ret)
+ return ret;
+
+ mutex_lock(&data->mutex);
+ /*
+ * Reading one channel at a time is inefficient but we
+ * don't care here. Buffered version should be used if
+ * performance is an issue.
+ */
+ ret = result_get(data, chan->channel, val);
+
+ mutex_unlock(&data->mutex);
+ iio_device_release_direct_mode(idev);
+
+ if (ret)
+ return ret;
+
+ return IIO_VAL_INT;
+ }
+ default:
+ return -EINVAL;
+ }
+}
+
+static int bu27034_write_raw(struct iio_dev *idev,
+ struct iio_chan_spec const *chan,
+ int val, int val2, long mask)
+{
+ struct bu27034_data *data = iio_priv(idev);
+ int ret;
+
+ ret = iio_device_claim_direct_mode(idev);
+ if (ret)
+ return ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ ret = bu27034_set_scale(data, chan->channel, val, val2);
+ break;
+ case IIO_CHAN_INFO_INT_TIME:
+ ret = bu27034_try_set_int_time(data, val);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ iio_device_release_direct_mode(idev);
+
+ return ret;
+}
+
+static int bu27034_read_avail(struct iio_dev *idev,
+ struct iio_chan_spec const *chan, const int **vals,
+ int *type, int *length, long mask)
+{
+ struct bu27034_data *data = iio_priv(idev);
+
+ switch (mask) {
+ case IIO_CHAN_INFO_INT_TIME:
+ return iio_gts_avail_times(&data->gts, vals, type, length);
+ case IIO_CHAN_INFO_SCALE:
+ return iio_gts_all_avail_scales(&data->gts, vals, type, length);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const struct iio_info bu27034_info = {
+ .read_raw = &bu27034_read_raw,
+ .write_raw = &bu27034_write_raw,
+ .read_avail = &bu27034_read_avail,
+};
+
+static int bu27034_chip_init(struct bu27034_data *data)
+{
+ int ret, sel;
+
+ /* Reset */
+ ret = regmap_update_bits(data->regmap, BU27034_REG_SYSTEM_CONTROL,
+ BU27034_MASK_SW_RESET, BU27034_MASK_SW_RESET);
+ if (ret)
+ return dev_err_probe(data->dev, ret, "Sensor reset failed\n");
+
+ msleep(1);
+ /*
+ * Read integration time here to ensure it is in regmap cache. We do
+ * this to speed-up the int-time acquisition in the start of the buffer
+ * handling thread where longer delays could make it more likely we end
+ * up skipping a sample, and where the longer delays make timestamps
+ * less accurate.
+ */
+ ret = regmap_read(data->regmap, BU27034_REG_MODE_CONTROL1, &sel);
+ if (ret)
+ dev_err(data->dev, "reading integration time failed\n");
+
+ return 0;
+}
+
+static int bu27034_wait_for_data(struct bu27034_data *data)
+{
+ int ret, val;
+
+ ret = regmap_read_poll_timeout(data->regmap, BU27034_REG_MODE_CONTROL4,
+ val, val & BU27034_MASK_VALID,
+ BU27034_DATA_WAIT_TIME_US,
+ BU27034_TOTAL_DATA_WAIT_TIME_US);
+ if (ret) {
+ dev_err(data->dev, "data polling %s\n",
+ !(val & BU27034_MASK_VALID) ? "timeout" : "fail");
+
+ return ret;
+ }
+
+ ret = regmap_bulk_read(data->regmap, BU27034_REG_DATA0_LO,
+ &data->scan.channels[0],
+ sizeof(data->scan.channels));
+ if (ret)
+ return ret;
+
+ bu27034_invalidate_read_data(data);
+
+ return 0;
+}
+
+static int bu27034_buffer_thread(void *arg)
+{
+ struct iio_dev *idev = arg;
+ struct bu27034_data *data;
+ int wait_ms;
+
+ data = iio_priv(idev);
+
+ wait_ms = bu27034_get_int_time(data);
+ wait_ms /= 1000;
+
+ wait_ms -= BU27034_MEAS_WAIT_PREMATURE_MS;
+
+ while (!kthread_should_stop()) {
+ int ret;
+ int64_t tstamp;
+
+ msleep(wait_ms);
+ ret = bu27034_wait_for_data(data);
+ if (ret)
+ continue;
+
+ tstamp = iio_get_time_ns(idev);
+
+ if (test_bit(BU27034_CHAN_ALS, idev->active_scan_mask)) {
+ int mlux;
+
+ ret = bu27034_calc_mlux(data, &data->scan.channels[0],
+ &mlux);
+ if (ret)
+ dev_err(data->dev, "failed to calculate lux\n");
+
+ /*
+ * The maximum Milli lux value we get with gain 1x time
+ * 55mS data ch0 = 0xffff ch1 = 0xffff fits in 26 bits
+ * so there should be no problem returning int from
+ * computations and casting it to u32
+ */
+ data->scan.mlux = (u32)mlux;
+ }
+ iio_push_to_buffers_with_timestamp(idev, &data->scan, tstamp);
+ }
+
+ return 0;
+}
+
+static int bu27034_buffer_enable(struct iio_dev *idev)
+{
+ struct bu27034_data *data = iio_priv(idev);
+ struct task_struct *task;
+ int ret;
+
+ mutex_lock(&data->mutex);
+ ret = bu27034_meas_set(data, true);
+ if (ret)
+ goto unlock_out;
+
+ task = kthread_run(bu27034_buffer_thread, idev,
+ "bu27034-buffering-%u",
+ iio_device_id(idev));
+ if (IS_ERR(task)) {
+ ret = PTR_ERR(task);
+ goto unlock_out;
+ }
+
+ data->task = task;
+
+unlock_out:
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static int bu27034_buffer_disable(struct iio_dev *idev)
+{
+ struct bu27034_data *data = iio_priv(idev);
+ int ret;
+
+ mutex_lock(&data->mutex);
+ if (data->task) {
+ kthread_stop(data->task);
+ data->task = NULL;
+ }
+
+ ret = bu27034_meas_set(data, false);
+ mutex_unlock(&data->mutex);
+
+ return ret;
+}
+
+static const struct iio_buffer_setup_ops bu27034_buffer_ops = {
+ .postenable = &bu27034_buffer_enable,
+ .predisable = &bu27034_buffer_disable,
+};
+
+static int bu27034_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct bu27034_data *data;
+ struct regmap *regmap;
+ struct iio_dev *idev;
+ unsigned int part_id, reg;
+ int ret;
+
+ regmap = devm_regmap_init_i2c(i2c, &bu27034_regmap);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialize Regmap\n");
+
+ idev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!idev)
+ return -ENOMEM;
+
+ ret = devm_regulator_get_enable(dev, "vdd");
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to get regulator\n");
+
+ data = iio_priv(idev);
+
+ ret = regmap_read(regmap, BU27034_REG_SYSTEM_CONTROL, &reg);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to access sensor\n");
+
+ part_id = FIELD_GET(BU27034_MASK_PART_ID, reg);
+
+ if (part_id != BU27034_ID)
+ dev_warn(dev, "unknown device 0x%x\n", part_id);
+
+ ret = devm_iio_init_iio_gts(dev, BU27034_SCALE_1X, 0, bu27034_gains,
+ ARRAY_SIZE(bu27034_gains), bu27034_itimes,
+ ARRAY_SIZE(bu27034_itimes), &data->gts);
+ if (ret)
+ return ret;
+
+ mutex_init(&data->mutex);
+ data->regmap = regmap;
+ data->dev = dev;
+
+ idev->channels = bu27034_channels;
+ idev->num_channels = ARRAY_SIZE(bu27034_channels);
+ idev->name = "bu27034";
+ idev->info = &bu27034_info;
+
+ idev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+ idev->available_scan_masks = bu27034_scan_masks;
+
+ ret = bu27034_chip_init(data);
+ if (ret)
+ return ret;
+
+ ret = devm_iio_kfifo_buffer_setup(dev, idev, &bu27034_buffer_ops);
+ if (ret)
+ return dev_err_probe(dev, ret, "buffer setup failed\n");
+
+ ret = devm_iio_device_register(dev, idev);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "Unable to register iio device\n");
+
+ return ret;
+}
+
+static const struct of_device_id bu27034_of_match[] = {
+ { .compatible = "rohm,bu27034" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, bu27034_of_match);
+
+static struct i2c_driver bu27034_i2c_driver = {
+ .driver = {
+ .name = "bu27034-als",
+ .of_match_table = bu27034_of_match,
+ },
+ .probe_new = bu27034_probe,
+};
+module_i2c_driver(bu27034_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BU27034 ambient light sensor driver");
+MODULE_IMPORT_NS(IIO_GTS_HELPER);
diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c
index 668e444f6049..9d0218b7426e 100644
--- a/drivers/iio/light/rpr0521.c
+++ b/drivers/iio/light/rpr0521.c
@@ -431,7 +431,7 @@ static irqreturn_t rpr0521_drdy_irq_thread(int irq, void *private)
struct rpr0521_data *data = iio_priv(indio_dev);
if (rpr0521_is_triggered(data)) {
- iio_trigger_poll_chained(data->drdy_trigger0);
+ iio_trigger_poll_nested(data->drdy_trigger0);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/light/st_uvis25_core.c b/drivers/iio/light/st_uvis25_core.c
index c737d3e193ae..50f95c5d2060 100644
--- a/drivers/iio/light/st_uvis25_core.c
+++ b/drivers/iio/light/st_uvis25_core.c
@@ -161,7 +161,7 @@ static irqreturn_t st_uvis25_trigger_handler_thread(int irq, void *private)
if (!(status & ST_UVIS25_REG_UV_DA_MASK))
return IRQ_NONE;
- iio_trigger_poll_chained(hw->trig);
+ iio_trigger_poll_nested(hw->trig);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/light/vcnl4000.c b/drivers/iio/light/vcnl4000.c
index 5c44a36ab5b3..56d3963d3d66 100644
--- a/drivers/iio/light/vcnl4000.c
+++ b/drivers/iio/light/vcnl4000.c
@@ -1077,7 +1077,7 @@ static irqreturn_t vcnl4010_irq_thread(int irq, void *p)
}
if (isr & VCNL4010_INT_DRDY && iio_buffer_enabled(indio_dev))
- iio_trigger_poll_chained(indio_dev->trig);
+ iio_trigger_poll_nested(indio_dev->trig);
end:
return IRQ_HANDLED;
diff --git a/drivers/iio/light/vcnl4035.c b/drivers/iio/light/vcnl4035.c
index 84148b944000..14e29330e972 100644
--- a/drivers/iio/light/vcnl4035.c
+++ b/drivers/iio/light/vcnl4035.c
@@ -89,7 +89,7 @@ static irqreturn_t vcnl4035_drdy_irq_thread(int irq, void *private)
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_EITHER),
iio_get_time_ns(indio_dev));
- iio_trigger_poll_chained(data->drdy_trigger0);
+ iio_trigger_poll_nested(data->drdy_trigger0);
return IRQ_HANDLED;
}
diff --git a/drivers/iio/potentiostat/lmp91000.c b/drivers/iio/potentiostat/lmp91000.c
index b82f093f1e6a..0083e858c21e 100644
--- a/drivers/iio/potentiostat/lmp91000.c
+++ b/drivers/iio/potentiostat/lmp91000.c
@@ -118,7 +118,7 @@ static int lmp91000_read(struct lmp91000_data *data, int channel, int *val)
data->chan_select = channel != LMP91000_REG_MODECN_3LEAD;
- iio_trigger_poll_chained(data->trig);
+ iio_trigger_poll_nested(data->trig);
ret = wait_for_completion_timeout(&data->completion, HZ);
reinit_completion(&data->completion);
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig
index c9453389e4f7..02b97e89de50 100644
--- a/drivers/iio/pressure/Kconfig
+++ b/drivers/iio/pressure/Kconfig
@@ -17,14 +17,14 @@ config ABP060MG
will be called abp060mg.
config BMP280
- tristate "Bosch Sensortec BMP180/BMP280/BMP380 pressure sensor I2C driver"
+ tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver"
depends on (I2C || SPI_MASTER)
select REGMAP
select BMP280_I2C if (I2C)
select BMP280_SPI if (SPI_MASTER)
help
- Say yes here to build support for Bosch Sensortec BMP180, BMP280 and
- BMP380 pressure and temperature sensors. Also supports the BME280 with
+ Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380
+ and BMP580 pressure and temperature sensors. Also supports the BME280 with
an additional humidity sensor channel.
To compile this driver as a module, choose M here: the core module
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index c0aff78489b4..6089f3f9d8f4 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -13,6 +13,7 @@
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp280-ds001.pdf
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bme280-ds002.pdf
* https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp388-ds001.pdf
+ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf
*
* Notice:
* The link to the bmp180 datasheet points to an outdated version missing these changes:
@@ -27,6 +28,7 @@
#include <linux/bitfield.h>
#include <linux/device.h>
#include <linux/module.h>
+#include <linux/nvmem-provider.h>
#include <linux/regmap.h>
#include <linux/delay.h>
#include <linux/iio/iio.h>
@@ -49,65 +51,6 @@
*/
enum { AC1, AC2, AC3, AC4, AC5, AC6, B1, B2, MB, MC, MD };
-struct bmp180_calib {
- s16 AC1;
- s16 AC2;
- s16 AC3;
- u16 AC4;
- u16 AC5;
- u16 AC6;
- s16 B1;
- s16 B2;
- s16 MB;
- s16 MC;
- s16 MD;
-};
-
-/* See datasheet Section 4.2.2. */
-struct bmp280_calib {
- u16 T1;
- s16 T2;
- s16 T3;
- u16 P1;
- s16 P2;
- s16 P3;
- s16 P4;
- s16 P5;
- s16 P6;
- s16 P7;
- s16 P8;
- s16 P9;
- u8 H1;
- s16 H2;
- u8 H3;
- s16 H4;
- s16 H5;
- s8 H6;
-};
-
-/* See datasheet Section 3.11.1. */
-struct bmp380_calib {
- u16 T1;
- u16 T2;
- s8 T3;
- s16 P1;
- s16 P2;
- s8 P3;
- s8 P4;
- u16 P5;
- u16 P6;
- s8 P7;
- s8 P8;
- s16 P9;
- s8 P10;
- s8 P11;
-};
-
-static const char *const bmp280_supply_names[] = {
- "vddd", "vdda"
-};
-
-#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
enum bmp380_odr {
BMP380_ODR_200HZ,
@@ -130,92 +73,39 @@ enum bmp380_odr {
BMP380_ODR_0_0015HZ,
};
-struct bmp280_data {
- struct device *dev;
- struct mutex lock;
- struct regmap *regmap;
- struct completion done;
- bool use_eoc;
- const struct bmp280_chip_info *chip_info;
- union {
- struct bmp180_calib bmp180;
- struct bmp280_calib bmp280;
- struct bmp380_calib bmp380;
- } calib;
- struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
- unsigned int start_up_time; /* in microseconds */
-
- /* log of base 2 of oversampling rate */
- u8 oversampling_press;
- u8 oversampling_temp;
- u8 oversampling_humid;
- u8 iir_filter_coeff;
-
- /*
- * BMP380 devices introduce sampling frequency configuration. See
- * datasheet sections 3.3.3. and 4.3.19 for more details.
- *
- * BMx280 devices allowed indirect configuration of sampling frequency
- * changing the t_standby duration between measurements, as detailed on
- * section 3.6.3 of the datasheet.
- */
- int sampling_freq;
-
- /*
- * Carryover value from temperature conversion, used in pressure
- * calculation.
- */
- s32 t_fine;
-
- /*
- * DMA (thus cache coherency maintenance) may require the
- * transfer buffers to live in their own cache lines.
- */
- union {
- /* Sensor data buffer */
- u8 buf[3];
- /* Calibration data buffers */
- __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
- __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
- u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
- /* Miscellaneous, endianess-aware data buffers */
- __le16 le16;
- __be16 be16;
- } __aligned(IIO_DMA_MINALIGN);
-};
-
-struct bmp280_chip_info {
- unsigned int id_reg;
-
- const struct iio_chan_spec *channels;
- int num_channels;
- unsigned int start_up_time;
-
- const int *oversampling_temp_avail;
- int num_oversampling_temp_avail;
- int oversampling_temp_default;
-
- const int *oversampling_press_avail;
- int num_oversampling_press_avail;
- int oversampling_press_default;
-
- const int *oversampling_humid_avail;
- int num_oversampling_humid_avail;
- int oversampling_humid_default;
-
- const int *iir_filter_coeffs_avail;
- int num_iir_filter_coeffs_avail;
- int iir_filter_coeff_default;
-
- const int (*sampling_freq_avail)[2];
- int num_sampling_freq_avail;
- int sampling_freq_default;
-
- int (*chip_config)(struct bmp280_data *);
- int (*read_temp)(struct bmp280_data *, int *);
- int (*read_press)(struct bmp280_data *, int *, int *);
- int (*read_humid)(struct bmp280_data *, int *, int *);
- int (*read_calib)(struct bmp280_data *);
+enum bmp580_odr {
+ BMP580_ODR_240HZ,
+ BMP580_ODR_218HZ,
+ BMP580_ODR_199HZ,
+ BMP580_ODR_179HZ,
+ BMP580_ODR_160HZ,
+ BMP580_ODR_149HZ,
+ BMP580_ODR_140HZ,
+ BMP580_ODR_129HZ,
+ BMP580_ODR_120HZ,
+ BMP580_ODR_110HZ,
+ BMP580_ODR_100HZ,
+ BMP580_ODR_89HZ,
+ BMP580_ODR_80HZ,
+ BMP580_ODR_70HZ,
+ BMP580_ODR_60HZ,
+ BMP580_ODR_50HZ,
+ BMP580_ODR_45HZ,
+ BMP580_ODR_40HZ,
+ BMP580_ODR_35HZ,
+ BMP580_ODR_30HZ,
+ BMP580_ODR_25HZ,
+ BMP580_ODR_20HZ,
+ BMP580_ODR_15HZ,
+ BMP580_ODR_10HZ,
+ BMP580_ODR_5HZ,
+ BMP580_ODR_4HZ,
+ BMP580_ODR_3HZ,
+ BMP580_ODR_2HZ,
+ BMP580_ODR_1HZ,
+ BMP580_ODR_0_5HZ,
+ BMP580_ODR_0_25HZ,
+ BMP580_ODR_0_125HZ,
};
/*
@@ -473,7 +363,7 @@ static u32 bmp280_compensate_press(struct bmp280_data *data,
}
static int bmp280_read_temp(struct bmp280_data *data,
- int *val)
+ int *val, int *val2)
{
s32 adc_temp, comp_temp;
int ret;
@@ -513,7 +403,7 @@ static int bmp280_read_press(struct bmp280_data *data,
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
- ret = bmp280_read_temp(data, NULL);
+ ret = bmp280_read_temp(data, NULL, NULL);
if (ret < 0)
return ret;
@@ -545,7 +435,7 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2)
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
- ret = bmp280_read_temp(data, NULL);
+ ret = bmp280_read_temp(data, NULL, NULL);
if (ret < 0)
return ret;
@@ -589,7 +479,7 @@ static int bmp280_read_raw(struct iio_dev *indio_dev,
ret = data->chip_info->read_press(data, val, val2);
break;
case IIO_TEMP:
- ret = data->chip_info->read_temp(data, val);
+ ret = data->chip_info->read_temp(data, val, val2);
break;
default:
ret = -EINVAL;
@@ -905,8 +795,10 @@ static int bmp280_chip_config(struct bmp280_data *data)
static const int bmp280_oversampling_avail[] = { 1, 2, 4, 8, 16 };
-static const struct bmp280_chip_info bmp280_chip_info = {
+const struct bmp280_chip_info bmp280_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BMP280_CHIP_ID,
+ .regmap_config = &bmp280_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
@@ -934,6 +826,7 @@ static const struct bmp280_chip_info bmp280_chip_info = {
.read_press = bmp280_read_press,
.read_calib = bmp280_read_calib,
};
+EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280);
static int bme280_chip_config(struct bmp280_data *data)
{
@@ -953,8 +846,10 @@ static int bme280_chip_config(struct bmp280_data *data)
return bmp280_chip_config(data);
}
-static const struct bmp280_chip_info bme280_chip_info = {
+const struct bmp280_chip_info bme280_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BME280_CHIP_ID,
+ .regmap_config = &bmp280_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 3,
@@ -977,6 +872,7 @@ static const struct bmp280_chip_info bme280_chip_info = {
.read_humid = bmp280_read_humid,
.read_calib = bme280_read_calib,
};
+EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280);
/*
* Helper function to send a command to BMP3XX sensors.
@@ -1095,7 +991,7 @@ static u32 bmp380_compensate_press(struct bmp280_data *data, u32 adc_press)
return comp_press;
}
-static int bmp380_read_temp(struct bmp280_data *data, int *val)
+static int bmp380_read_temp(struct bmp280_data *data, int *val, int *val2)
{
s32 comp_temp;
u32 adc_temp;
@@ -1135,7 +1031,7 @@ static int bmp380_read_press(struct bmp280_data *data, int *val, int *val2)
int ret;
/* Read and compensate for temperature so we get a reading of t_fine */
- ret = bmp380_read_temp(data, NULL);
+ ret = bmp380_read_temp(data, NULL, NULL);
if (ret)
return ret;
@@ -1217,6 +1113,12 @@ static const int bmp380_odr_table[][2] = {
[BMP380_ODR_0_0015HZ] = {0, 1526},
};
+static int bmp380_preinit(struct bmp280_data *data)
+{
+ /* BMP3xx requires soft-reset as part of initialization */
+ return bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
+}
+
static int bmp380_chip_config(struct bmp280_data *data)
{
bool change = false, aux;
@@ -1319,8 +1221,10 @@ static int bmp380_chip_config(struct bmp280_data *data)
static const int bmp380_oversampling_avail[] = { 1, 2, 4, 8, 16, 32 };
static const int bmp380_iir_filter_coeffs_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128};
-static const struct bmp280_chip_info bmp380_chip_info = {
+const struct bmp280_chip_info bmp380_chip_info = {
.id_reg = BMP380_REG_ID,
+ .chip_id = BMP380_CHIP_ID,
+ .regmap_config = &bmp380_regmap_config,
.start_up_time = 2000,
.channels = bmp380_channels,
.num_channels = 2,
@@ -1345,7 +1249,508 @@ static const struct bmp280_chip_info bmp380_chip_info = {
.read_temp = bmp380_read_temp,
.read_press = bmp380_read_press,
.read_calib = bmp380_read_calib,
+ .preinit = bmp380_preinit,
+};
+EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280);
+
+static int bmp580_soft_reset(struct bmp280_data *data)
+{
+ unsigned int reg;
+ int ret;
+
+ ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_SOFT_RESET);
+ if (ret) {
+ dev_err(data->dev, "failed to send reset command to device\n");
+ return ret;
+ }
+ usleep_range(2000, 2500);
+
+ /* Dummy read of chip_id */
+ ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, &reg);
+ if (ret) {
+ dev_err(data->dev, "failed to reestablish comms after reset\n");
+ return ret;
+ }
+
+ ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, &reg);
+ if (ret) {
+ dev_err(data->dev, "error reading interrupt status register\n");
+ return ret;
+ }
+ if (!(reg & BMP580_INT_STATUS_POR_MASK)) {
+ dev_err(data->dev, "error resetting sensor\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * bmp580_nvm_operation() - Helper function to commit NVM memory operations
+ * @data: sensor data struct
+ * @is_write: flag to signal write operation
+ */
+static int bmp580_nvm_operation(struct bmp280_data *data, bool is_write)
+{
+ unsigned long timeout, poll;
+ unsigned int reg;
+ int ret;
+
+ /* Check NVM ready flag */
+ ret = regmap_read(data->regmap, BMP580_REG_STATUS, &reg);
+ if (ret) {
+ dev_err(data->dev, "failed to check nvm status\n");
+ return ret;
+ }
+ if (!(reg & BMP580_STATUS_NVM_RDY_MASK)) {
+ dev_err(data->dev, "sensor's nvm is not ready\n");
+ return -EIO;
+ }
+
+ /* Start NVM operation sequence */
+ ret = regmap_write(data->regmap, BMP580_REG_CMD, BMP580_CMD_NVM_OP_SEQ_0);
+ if (ret) {
+ dev_err(data->dev, "failed to send nvm operation's first sequence\n");
+ return ret;
+ }
+ if (is_write) {
+ /* Send NVM write sequence */
+ ret = regmap_write(data->regmap, BMP580_REG_CMD,
+ BMP580_CMD_NVM_WRITE_SEQ_1);
+ if (ret) {
+ dev_err(data->dev, "failed to send nvm write sequence\n");
+ return ret;
+ }
+ /* Datasheet says on 4.8.1.2 it takes approximately 10ms */
+ poll = 2000;
+ timeout = 12000;
+ } else {
+ /* Send NVM read sequence */
+ ret = regmap_write(data->regmap, BMP580_REG_CMD,
+ BMP580_CMD_NVM_READ_SEQ_1);
+ if (ret) {
+ dev_err(data->dev, "failed to send nvm read sequence\n");
+ return ret;
+ }
+ /* Datasheet says on 4.8.1.1 it takes approximately 200us */
+ poll = 50;
+ timeout = 400;
+ }
+ if (ret) {
+ dev_err(data->dev, "failed to write command sequence\n");
+ return -EIO;
+ }
+
+ /* Wait until NVM is ready again */
+ ret = regmap_read_poll_timeout(data->regmap, BMP580_REG_STATUS, reg,
+ (reg & BMP580_STATUS_NVM_RDY_MASK),
+ poll, timeout);
+ if (ret) {
+ dev_err(data->dev, "error checking nvm operation status\n");
+ return ret;
+ }
+
+ /* Check NVM error flags */
+ if ((reg & BMP580_STATUS_NVM_ERR_MASK) || (reg & BMP580_STATUS_NVM_CMD_ERR_MASK)) {
+ dev_err(data->dev, "error processing nvm operation\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/*
+ * Contrary to previous sensors families, compensation algorithm is builtin.
+ * We are only required to read the register raw data and adapt the ranges
+ * for what is expected on IIO ABI.
+ */
+
+static int bmp580_read_temp(struct bmp280_data *data, int *val, int *val2)
+{
+ s32 raw_temp;
+ int ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP580_REG_TEMP_XLSB, data->buf,
+ sizeof(data->buf));
+ if (ret) {
+ dev_err(data->dev, "failed to read temperature\n");
+ return ret;
+ }
+
+ raw_temp = get_unaligned_le24(data->buf);
+ if (raw_temp == BMP580_TEMP_SKIPPED) {
+ dev_err(data->dev, "reading temperature skipped\n");
+ return -EIO;
+ }
+
+ /*
+ * Temperature is returned in Celsius degrees in fractional
+ * form down 2^16. We reescale by x1000 to return milli Celsius
+ * to respect IIO ABI.
+ */
+ *val = raw_temp * 1000;
+ *val2 = 16;
+ return IIO_VAL_FRACTIONAL_LOG2;
+}
+
+static int bmp580_read_press(struct bmp280_data *data, int *val, int *val2)
+{
+ u32 raw_press;
+ int ret;
+
+ ret = regmap_bulk_read(data->regmap, BMP580_REG_PRESS_XLSB, data->buf,
+ sizeof(data->buf));
+ if (ret) {
+ dev_err(data->dev, "failed to read pressure\n");
+ return ret;
+ }
+
+ raw_press = get_unaligned_le24(data->buf);
+ if (raw_press == BMP580_PRESS_SKIPPED) {
+ dev_err(data->dev, "reading pressure skipped\n");
+ return -EIO;
+ }
+ /*
+ * Pressure is returned in Pascals in fractional form down 2^16.
+ * We reescale /1000 to convert to kilopascal to respect IIO ABI.
+ */
+ *val = raw_press;
+ *val2 = 64000; /* 2^6 * 1000 */
+ return IIO_VAL_FRACTIONAL;
+}
+
+static const int bmp580_odr_table[][2] = {
+ [BMP580_ODR_240HZ] = {240, 0},
+ [BMP580_ODR_218HZ] = {218, 0},
+ [BMP580_ODR_199HZ] = {199, 0},
+ [BMP580_ODR_179HZ] = {179, 0},
+ [BMP580_ODR_160HZ] = {160, 0},
+ [BMP580_ODR_149HZ] = {149, 0},
+ [BMP580_ODR_140HZ] = {140, 0},
+ [BMP580_ODR_129HZ] = {129, 0},
+ [BMP580_ODR_120HZ] = {120, 0},
+ [BMP580_ODR_110HZ] = {110, 0},
+ [BMP580_ODR_100HZ] = {100, 0},
+ [BMP580_ODR_89HZ] = {89, 0},
+ [BMP580_ODR_80HZ] = {80, 0},
+ [BMP580_ODR_70HZ] = {70, 0},
+ [BMP580_ODR_60HZ] = {60, 0},
+ [BMP580_ODR_50HZ] = {50, 0},
+ [BMP580_ODR_45HZ] = {45, 0},
+ [BMP580_ODR_40HZ] = {40, 0},
+ [BMP580_ODR_35HZ] = {35, 0},
+ [BMP580_ODR_30HZ] = {30, 0},
+ [BMP580_ODR_25HZ] = {25, 0},
+ [BMP580_ODR_20HZ] = {20, 0},
+ [BMP580_ODR_15HZ] = {15, 0},
+ [BMP580_ODR_10HZ] = {10, 0},
+ [BMP580_ODR_5HZ] = {5, 0},
+ [BMP580_ODR_4HZ] = {4, 0},
+ [BMP580_ODR_3HZ] = {3, 0},
+ [BMP580_ODR_2HZ] = {2, 0},
+ [BMP580_ODR_1HZ] = {1, 0},
+ [BMP580_ODR_0_5HZ] = {0, 500000},
+ [BMP580_ODR_0_25HZ] = {0, 250000},
+ [BMP580_ODR_0_125HZ] = {0, 125000},
+};
+
+static const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 };
+
+static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct bmp280_data *data = priv;
+ u16 *dst = val;
+ int ret, addr;
+
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+
+ /* Set sensor in standby mode */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+ BMP580_ODR_DEEPSLEEP_DIS |
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to change sensor to standby mode\n");
+ goto exit;
+ }
+ /* Wait standby transition time */
+ usleep_range(2500, 3000);
+
+ while (bytes >= sizeof(*dst)) {
+ addr = bmp580_nvmem_addrs[offset / sizeof(*dst)];
+
+ ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
+ FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+ if (ret) {
+ dev_err(data->dev, "error writing nvm address\n");
+ goto exit;
+ }
+
+ ret = bmp580_nvm_operation(data, false);
+ if (ret)
+ goto exit;
+
+ ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+ sizeof(data->le16));
+ if (ret) {
+ dev_err(data->dev, "error reading nvm data regs\n");
+ goto exit;
+ }
+
+ *dst++ = le16_to_cpu(data->le16);
+ bytes -= sizeof(*dst);
+ offset += sizeof(*dst);
+ }
+exit:
+ /* Restore chip config */
+ data->chip_info->chip_config(data);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ return ret;
+}
+
+static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
+ size_t bytes)
+{
+ struct bmp280_data *data = priv;
+ u16 *buf = val;
+ int ret, addr;
+
+ pm_runtime_get_sync(data->dev);
+ mutex_lock(&data->lock);
+
+ /* Set sensor in standby mode */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+ BMP580_ODR_DEEPSLEEP_DIS |
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to change sensor to standby mode\n");
+ goto exit;
+ }
+ /* Wait standby transition time */
+ usleep_range(2500, 3000);
+
+ while (bytes >= sizeof(*buf)) {
+ addr = bmp580_nvmem_addrs[offset / sizeof(*buf)];
+
+ ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, BMP580_NVM_PROG_EN |
+ FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+ if (ret) {
+ dev_err(data->dev, "error writing nvm address\n");
+ goto exit;
+ }
+ data->le16 = cpu_to_le16(*buf++);
+
+ ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+ sizeof(data->le16));
+ if (ret) {
+ dev_err(data->dev, "error writing LSB NVM data regs\n");
+ goto exit;
+ }
+
+ ret = bmp580_nvm_operation(data, true);
+ if (ret)
+ goto exit;
+
+ /* Disable programming mode bit */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
+ BMP580_NVM_PROG_EN, 0);
+ if (ret) {
+ dev_err(data->dev, "error resetting nvm write\n");
+ goto exit;
+ }
+
+ bytes -= sizeof(*buf);
+ offset += sizeof(*buf);
+ }
+exit:
+ /* Restore chip config */
+ data->chip_info->chip_config(data);
+ mutex_unlock(&data->lock);
+ pm_runtime_mark_last_busy(data->dev);
+ pm_runtime_put_autosuspend(data->dev);
+ return ret;
+}
+
+static int bmp580_preinit(struct bmp280_data *data)
+{
+ struct nvmem_config config = {
+ .dev = data->dev,
+ .priv = data,
+ .name = "bmp580_nvmem",
+ .word_size = sizeof(u16),
+ .stride = sizeof(u16),
+ .size = 3 * sizeof(u16),
+ .reg_read = bmp580_nvmem_read,
+ .reg_write = bmp580_nvmem_write,
+ };
+ unsigned int reg;
+ int ret;
+
+ /* Issue soft-reset command */
+ ret = bmp580_soft_reset(data);
+ if (ret)
+ return ret;
+
+ /* Post powerup sequence */
+ ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, &reg);
+ if (ret)
+ return ret;
+
+ /* Print warn message if we don't know the chip id */
+ if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT)
+ dev_warn(data->dev, "preinit: unexpected chip_id\n");
+
+ ret = regmap_read(data->regmap, BMP580_REG_STATUS, &reg);
+ if (ret)
+ return ret;
+
+ /* Check nvm status */
+ if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) {
+ dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
+ return -EIO;
+ }
+
+ /* Register nvmem device */
+ return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
+}
+
+static int bmp580_chip_config(struct bmp280_data *data)
+{
+ bool change = false, aux;
+ unsigned int tmp;
+ u8 reg_val;
+ int ret;
+
+ /* Sets sensor in standby mode */
+ ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+ BMP580_ODR_DEEPSLEEP_DIS |
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+ if (ret) {
+ dev_err(data->dev, "failed to change sensor to standby mode\n");
+ return ret;
+ }
+ /* From datasheet's table 4: electrical characteristics */
+ usleep_range(2500, 3000);
+
+ /* Set default DSP mode settings */
+ reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) |
+ BMP580_DSP_SHDW_IIR_TEMP_EN | BMP580_DSP_SHDW_IIR_PRESS_EN;
+
+ ret = regmap_update_bits(data->regmap, BMP580_REG_DSP_CONFIG,
+ BMP580_DSP_COMP_MASK |
+ BMP580_DSP_SHDW_IIR_TEMP_EN |
+ BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val);
+
+ /* Configure oversampling */
+ reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) |
+ FIELD_PREP(BMP580_OSR_PRESS_MASK, data->oversampling_press) |
+ BMP580_OSR_PRESS_EN;
+
+ ret = regmap_update_bits_check(data->regmap, BMP580_REG_OSR_CONFIG,
+ BMP580_OSR_TEMP_MASK | BMP580_OSR_PRESS_MASK |
+ BMP580_OSR_PRESS_EN,
+ reg_val, &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write oversampling register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ /* Configure output data rate */
+ ret = regmap_update_bits_check(data->regmap, BMP580_REG_ODR_CONFIG, BMP580_ODR_MASK,
+ FIELD_PREP(BMP580_ODR_MASK, data->sampling_freq),
+ &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write ODR configuration register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ /* Set filter data */
+ reg_val = FIELD_PREP(BMP580_DSP_IIR_PRESS_MASK, data->iir_filter_coeff) |
+ FIELD_PREP(BMP580_DSP_IIR_TEMP_MASK, data->iir_filter_coeff);
+
+ ret = regmap_update_bits_check(data->regmap, BMP580_REG_DSP_IIR,
+ BMP580_DSP_IIR_PRESS_MASK |
+ BMP580_DSP_IIR_TEMP_MASK,
+ reg_val, &aux);
+ if (ret) {
+ dev_err(data->dev, "failed to write config register\n");
+ return ret;
+ }
+ change = change || aux;
+
+ /* Restore sensor to normal operation mode */
+ ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+ BMP580_MODE_MASK,
+ FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL));
+ if (ret) {
+ dev_err(data->dev, "failed to set normal mode\n");
+ return ret;
+ }
+ /* From datasheet's table 4: electrical characteristics */
+ usleep_range(3000, 3500);
+
+ if (change) {
+ /*
+ * Check if ODR and OSR settings are valid or we are
+ * operating in a degraded mode.
+ */
+ ret = regmap_read(data->regmap, BMP580_REG_EFF_OSR, &tmp);
+ if (ret) {
+ dev_err(data->dev, "error reading effective OSR register\n");
+ return ret;
+ }
+ if (!(tmp & BMP580_EFF_OSR_VALID_ODR)) {
+ dev_warn(data->dev, "OSR and ODR incompatible settings detected\n");
+ /* Set current OSR settings from data on effective OSR */
+ data->oversampling_temp = FIELD_GET(BMP580_EFF_OSR_TEMP_MASK, tmp);
+ data->oversampling_press = FIELD_GET(BMP580_EFF_OSR_PRESS_MASK, tmp);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static const int bmp580_oversampling_avail[] = { 1, 2, 4, 8, 16, 32, 64, 128 };
+
+const struct bmp280_chip_info bmp580_chip_info = {
+ .id_reg = BMP580_REG_CHIP_ID,
+ .chip_id = BMP580_CHIP_ID,
+ .regmap_config = &bmp580_regmap_config,
+ .start_up_time = 2000,
+ .channels = bmp380_channels,
+ .num_channels = 2,
+
+ .oversampling_temp_avail = bmp580_oversampling_avail,
+ .num_oversampling_temp_avail = ARRAY_SIZE(bmp580_oversampling_avail),
+ .oversampling_temp_default = ilog2(1),
+
+ .oversampling_press_avail = bmp580_oversampling_avail,
+ .num_oversampling_press_avail = ARRAY_SIZE(bmp580_oversampling_avail),
+ .oversampling_press_default = ilog2(4),
+
+ .sampling_freq_avail = bmp580_odr_table,
+ .num_sampling_freq_avail = ARRAY_SIZE(bmp580_odr_table) * 2,
+ .sampling_freq_default = BMP580_ODR_50HZ,
+
+ .iir_filter_coeffs_avail = bmp380_iir_filter_coeffs_avail,
+ .num_iir_filter_coeffs_avail = ARRAY_SIZE(bmp380_iir_filter_coeffs_avail),
+ .iir_filter_coeff_default = 2,
+
+ .chip_config = bmp580_chip_config,
+ .read_temp = bmp580_read_temp,
+ .read_press = bmp580_read_press,
+ .preinit = bmp580_preinit,
};
+EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280);
static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas)
{
@@ -1467,7 +1872,7 @@ static s32 bmp180_compensate_temp(struct bmp280_data *data, s32 adc_temp)
return (data->t_fine + 8) >> 4;
}
-static int bmp180_read_temp(struct bmp280_data *data, int *val)
+static int bmp180_read_temp(struct bmp280_data *data, int *val, int *val2)
{
s32 adc_temp, comp_temp;
int ret;
@@ -1555,7 +1960,7 @@ static int bmp180_read_press(struct bmp280_data *data,
int ret;
/* Read and compensate temperature so we get a reading of t_fine. */
- ret = bmp180_read_temp(data, NULL);
+ ret = bmp180_read_temp(data, NULL, NULL);
if (ret)
return ret;
@@ -1579,8 +1984,10 @@ static int bmp180_chip_config(struct bmp280_data *data)
static const int bmp180_oversampling_temp_avail[] = { 1 };
static const int bmp180_oversampling_press_avail[] = { 1, 2, 4, 8 };
-static const struct bmp280_chip_info bmp180_chip_info = {
+const struct bmp280_chip_info bmp180_chip_info = {
.id_reg = BMP280_REG_ID,
+ .chip_id = BMP180_CHIP_ID,
+ .regmap_config = &bmp180_regmap_config,
.start_up_time = 2000,
.channels = bmp280_channels,
.num_channels = 2,
@@ -1600,6 +2007,7 @@ static const struct bmp280_chip_info bmp180_chip_info = {
.read_press = bmp180_read_press,
.read_calib = bmp180_read_calib,
};
+EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280);
static irqreturn_t bmp085_eoc_irq(int irq, void *d)
{
@@ -1661,11 +2069,10 @@ static void bmp280_regulators_disable(void *data)
int bmp280_common_probe(struct device *dev,
struct regmap *regmap,
- unsigned int chip,
+ const struct bmp280_chip_info *chip_info,
const char *name,
int irq)
{
- const struct bmp280_chip_info *chip_info;
struct iio_dev *indio_dev;
struct bmp280_data *data;
struct gpio_desc *gpiod;
@@ -1684,22 +2091,6 @@ int bmp280_common_probe(struct device *dev,
indio_dev->info = &bmp280_info;
indio_dev->modes = INDIO_DIRECT_MODE;
- switch (chip) {
- case BMP180_CHIP_ID:
- chip_info = &bmp180_chip_info;
- break;
- case BMP280_CHIP_ID:
- chip_info = &bmp280_chip_info;
- break;
- case BME280_CHIP_ID:
- chip_info = &bme280_chip_info;
- break;
- case BMP380_CHIP_ID:
- chip_info = &bmp380_chip_info;
- break;
- default:
- return -EINVAL;
- }
data->chip_info = chip_info;
/* Apply initial values from chip info structure */
@@ -1751,17 +2142,17 @@ int bmp280_common_probe(struct device *dev,
ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
if (ret < 0)
return ret;
- if (chip_id != chip) {
+ if (chip_id != data->chip_info->chip_id) {
dev_err(dev, "bad chip id: expected %x got %x\n",
- chip, chip_id);
+ data->chip_info->chip_id, chip_id);
return -EINVAL;
}
- /* BMP3xx requires soft-reset as part of initialization */
- if (chip_id == BMP380_CHIP_ID) {
- ret = bmp380_cmd(data, BMP380_CMD_SOFT_RESET);
- if (ret < 0)
- return ret;
+ if (data->chip_info->preinit) {
+ ret = data->chip_info->preinit(data);
+ if (ret)
+ return dev_err_probe(data->dev, ret,
+ "error running preinit tasks\n");
}
ret = data->chip_info->chip_config(data);
@@ -1776,10 +2167,12 @@ int bmp280_common_probe(struct device *dev,
* time once. They will not change.
*/
- ret = data->chip_info->read_calib(data);
- if (ret < 0)
- return dev_err_probe(data->dev, ret,
- "failed to read calibration coefficients\n");
+ if (data->chip_info->read_calib) {
+ ret = data->chip_info->read_calib(data);
+ if (ret < 0)
+ return dev_err_probe(data->dev, ret,
+ "failed to read calibration coefficients\n");
+ }
/*
* Attempt to grab an optional EOC IRQ - only the BMP085 has this
diff --git a/drivers/iio/pressure/bmp280-i2c.c b/drivers/iio/pressure/bmp280-i2c.c
index 14eab086d24a..567b945e6427 100644
--- a/drivers/iio/pressure/bmp280-i2c.c
+++ b/drivers/iio/pressure/bmp280-i2c.c
@@ -8,25 +8,14 @@
static int bmp280_i2c_probe(struct i2c_client *client)
{
struct regmap *regmap;
- const struct regmap_config *regmap_config;
+ const struct bmp280_chip_info *chip_info;
const struct i2c_device_id *id = i2c_client_get_device_id(client);
- switch (id->driver_data) {
- case BMP180_CHIP_ID:
- regmap_config = &bmp180_regmap_config;
- break;
- case BMP280_CHIP_ID:
- case BME280_CHIP_ID:
- regmap_config = &bmp280_regmap_config;
- break;
- case BMP380_CHIP_ID:
- regmap_config = &bmp380_regmap_config;
- break;
- default:
- return -EINVAL;
- }
+ chip_info = device_get_match_data(&client->dev);
+ if (!chip_info)
+ chip_info = (const struct bmp280_chip_info *) id->driver_data;
- regmap = devm_regmap_init_i2c(client, regmap_config);
+ regmap = devm_regmap_init_i2c(client, chip_info->regmap_config);
if (IS_ERR(regmap)) {
dev_err(&client->dev, "failed to allocate register map\n");
return PTR_ERR(regmap);
@@ -34,27 +23,29 @@ static int bmp280_i2c_probe(struct i2c_client *client)
return bmp280_common_probe(&client->dev,
regmap,
- id->driver_data,
+ chip_info,
id->name,
client->irq);
}
static const struct of_device_id bmp280_of_i2c_match[] = {
- { .compatible = "bosch,bmp085", .data = (void *)BMP180_CHIP_ID },
- { .compatible = "bosch,bmp180", .data = (void *)BMP180_CHIP_ID },
- { .compatible = "bosch,bmp280", .data = (void *)BMP280_CHIP_ID },
- { .compatible = "bosch,bme280", .data = (void *)BME280_CHIP_ID },
- { .compatible = "bosch,bmp380", .data = (void *)BMP380_CHIP_ID },
+ { .compatible = "bosch,bmp085", .data = &bmp180_chip_info },
+ { .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
+ { .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
+ { .compatible = "bosch,bme280", .data = &bme280_chip_info },
+ { .compatible = "bosch,bmp380", .data = &bmp380_chip_info },
+ { .compatible = "bosch,bmp580", .data = &bmp580_chip_info },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_i2c_match);
static const struct i2c_device_id bmp280_i2c_id[] = {
- {"bmp085", BMP180_CHIP_ID },
- {"bmp180", BMP180_CHIP_ID },
- {"bmp280", BMP280_CHIP_ID },
- {"bme280", BME280_CHIP_ID },
- {"bmp380", BMP380_CHIP_ID },
+ {"bmp085", (kernel_ulong_t)&bmp180_chip_info },
+ {"bmp180", (kernel_ulong_t)&bmp180_chip_info },
+ {"bmp280", (kernel_ulong_t)&bmp280_chip_info },
+ {"bme280", (kernel_ulong_t)&bme280_chip_info },
+ {"bmp380", (kernel_ulong_t)&bmp380_chip_info },
+ {"bmp580", (kernel_ulong_t)&bmp580_chip_info },
{ },
};
MODULE_DEVICE_TABLE(i2c, bmp280_i2c_id);
diff --git a/drivers/iio/pressure/bmp280-regmap.c b/drivers/iio/pressure/bmp280-regmap.c
index c98c67970265..3ee56720428c 100644
--- a/drivers/iio/pressure/bmp280-regmap.c
+++ b/drivers/iio/pressure/bmp280-regmap.c
@@ -115,6 +115,54 @@ static bool bmp380_is_volatile_reg(struct device *dev, unsigned int reg)
}
}
+static bool bmp580_is_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP580_REG_NVM_DATA_MSB:
+ case BMP580_REG_NVM_DATA_LSB:
+ case BMP580_REG_NVM_ADDR:
+ case BMP580_REG_ODR_CONFIG:
+ case BMP580_REG_OSR_CONFIG:
+ case BMP580_REG_INT_SOURCE:
+ case BMP580_REG_INT_CONFIG:
+ case BMP580_REG_OOR_THR_MSB:
+ case BMP580_REG_OOR_THR_LSB:
+ case BMP580_REG_OOR_CONFIG:
+ case BMP580_REG_OOR_RANGE:
+ case BMP580_REG_IF_CONFIG:
+ case BMP580_REG_FIFO_CONFIG:
+ case BMP580_REG_FIFO_SEL:
+ case BMP580_REG_DSP_CONFIG:
+ case BMP580_REG_DSP_IIR:
+ case BMP580_REG_CMD:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static bool bmp580_is_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case BMP580_REG_NVM_DATA_MSB:
+ case BMP580_REG_NVM_DATA_LSB:
+ case BMP580_REG_FIFO_COUNT:
+ case BMP580_REG_INT_STATUS:
+ case BMP580_REG_PRESS_XLSB:
+ case BMP580_REG_PRESS_LSB:
+ case BMP580_REG_PRESS_MSB:
+ case BMP580_REG_FIFO_DATA:
+ case BMP580_REG_TEMP_XLSB:
+ case BMP580_REG_TEMP_LSB:
+ case BMP580_REG_TEMP_MSB:
+ case BMP580_REG_EFF_OSR:
+ case BMP580_REG_STATUS:
+ return true;
+ default:
+ return false;
+ }
+}
+
const struct regmap_config bmp280_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -138,3 +186,15 @@ const struct regmap_config bmp380_regmap_config = {
.volatile_reg = bmp380_is_volatile_reg,
};
EXPORT_SYMBOL_NS(bmp380_regmap_config, IIO_BMP280);
+
+const struct regmap_config bmp580_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = BMP580_REG_CMD,
+ .cache_type = REGCACHE_RBTREE,
+
+ .writeable_reg = bmp580_is_writeable_reg,
+ .volatile_reg = bmp580_is_volatile_reg,
+};
+EXPORT_SYMBOL_NS(bmp580_regmap_config, IIO_BMP280);
diff --git a/drivers/iio/pressure/bmp280-spi.c b/drivers/iio/pressure/bmp280-spi.c
index 011c68e07ebf..1dff9bb7c4e9 100644
--- a/drivers/iio/pressure/bmp280-spi.c
+++ b/drivers/iio/pressure/bmp280-spi.c
@@ -47,8 +47,8 @@ static struct regmap_bus bmp280_regmap_bus = {
static int bmp280_spi_probe(struct spi_device *spi)
{
const struct spi_device_id *id = spi_get_device_id(spi);
+ const struct bmp280_chip_info *chip_info;
struct regmap *regmap;
- const struct regmap_config *regmap_config;
int ret;
spi->bits_per_word = 8;
@@ -58,25 +58,14 @@ static int bmp280_spi_probe(struct spi_device *spi)
return ret;
}
- switch (id->driver_data) {
- case BMP180_CHIP_ID:
- regmap_config = &bmp180_regmap_config;
- break;
- case BMP280_CHIP_ID:
- case BME280_CHIP_ID:
- regmap_config = &bmp280_regmap_config;
- break;
- case BMP380_CHIP_ID:
- regmap_config = &bmp380_regmap_config;
- break;
- default:
- return -EINVAL;
- }
+ chip_info = device_get_match_data(&spi->dev);
+ if (!chip_info)
+ chip_info = (const struct bmp280_chip_info *) id->driver_data;
regmap = devm_regmap_init(&spi->dev,
&bmp280_regmap_bus,
&spi->dev,
- regmap_config);
+ chip_info->regmap_config);
if (IS_ERR(regmap)) {
dev_err(&spi->dev, "failed to allocate register map\n");
return PTR_ERR(regmap);
@@ -84,28 +73,30 @@ static int bmp280_spi_probe(struct spi_device *spi)
return bmp280_common_probe(&spi->dev,
regmap,
- id->driver_data,
+ chip_info,
id->name,
spi->irq);
}
static const struct of_device_id bmp280_of_spi_match[] = {
- { .compatible = "bosch,bmp085", },
- { .compatible = "bosch,bmp180", },
- { .compatible = "bosch,bmp181", },
- { .compatible = "bosch,bmp280", },
- { .compatible = "bosch,bme280", },
- { .compatible = "bosch,bmp380", },
+ { .compatible = "bosch,bmp085", .data = &bmp180_chip_info },
+ { .compatible = "bosch,bmp180", .data = &bmp180_chip_info },
+ { .compatible = "bosch,bmp181", .data = &bmp180_chip_info },
+ { .compatible = "bosch,bmp280", .data = &bmp280_chip_info },
+ { .compatible = "bosch,bme280", .data = &bmp280_chip_info },
+ { .compatible = "bosch,bmp380", .data = &bmp380_chip_info },
+ { .compatible = "bosch,bmp580", .data = &bmp580_chip_info },
{ },
};
MODULE_DEVICE_TABLE(of, bmp280_of_spi_match);
static const struct spi_device_id bmp280_spi_id[] = {
- { "bmp180", BMP180_CHIP_ID },
- { "bmp181", BMP180_CHIP_ID },
- { "bmp280", BMP280_CHIP_ID },
- { "bme280", BME280_CHIP_ID },
- { "bmp380", BMP380_CHIP_ID },
+ { "bmp180", (kernel_ulong_t)&bmp180_chip_info },
+ { "bmp181", (kernel_ulong_t)&bmp180_chip_info },
+ { "bmp280", (kernel_ulong_t)&bmp280_chip_info },
+ { "bme280", (kernel_ulong_t)&bmp280_chip_info },
+ { "bmp380", (kernel_ulong_t)&bmp380_chip_info },
+ { "bmp580", (kernel_ulong_t)&bmp580_chip_info },
{ }
};
MODULE_DEVICE_TABLE(spi, bmp280_spi_id);
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index c791325c7416..5c0563ce7572 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -1,7 +1,114 @@
/* SPDX-License-Identifier: GPL-2.0 */
#include <linux/bitops.h>
#include <linux/device.h>
+#include <linux/iio/iio.h>
#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+
+/* BMP580 specific registers */
+#define BMP580_REG_CMD 0x7E
+#define BMP580_REG_EFF_OSR 0x38
+#define BMP580_REG_ODR_CONFIG 0x37
+#define BMP580_REG_OSR_CONFIG 0x36
+#define BMP580_REG_IF_CONFIG 0x13
+#define BMP580_REG_REV_ID 0x02
+#define BMP580_REG_CHIP_ID 0x01
+/* OOR allows to configure a pressure alarm */
+#define BMP580_REG_OOR_CONFIG 0x35
+#define BMP580_REG_OOR_RANGE 0x34
+#define BMP580_REG_OOR_THR_MSB 0x33
+#define BMP580_REG_OOR_THR_LSB 0x32
+/* DSP registers (IIR filters) */
+#define BMP580_REG_DSP_IIR 0x31
+#define BMP580_REG_DSP_CONFIG 0x30
+/* NVM access registers */
+#define BMP580_REG_NVM_DATA_MSB 0x2D
+#define BMP580_REG_NVM_DATA_LSB 0x2C
+#define BMP580_REG_NVM_ADDR 0x2B
+/* Status registers */
+#define BMP580_REG_STATUS 0x28
+#define BMP580_REG_INT_STATUS 0x27
+#define BMP580_REG_CHIP_STATUS 0x11
+/* Data registers */
+#define BMP580_REG_FIFO_DATA 0x29
+#define BMP580_REG_PRESS_MSB 0x22
+#define BMP580_REG_PRESS_LSB 0x21
+#define BMP580_REG_PRESS_XLSB 0x20
+#define BMP580_REG_TEMP_MSB 0x1F
+#define BMP580_REG_TEMP_LSB 0x1E
+#define BMP580_REG_TEMP_XLSB 0x1D
+/* FIFO config registers */
+#define BMP580_REG_FIFO_SEL 0x18
+#define BMP580_REG_FIFO_COUNT 0x17
+#define BMP580_REG_FIFO_CONFIG 0x16
+/* Interruptions config registers */
+#define BMP580_REG_INT_SOURCE 0x15
+#define BMP580_REG_INT_CONFIG 0x14
+
+#define BMP580_CMD_NOOP 0x00
+#define BMP580_CMD_EXTMODE_SEQ_0 0x73
+#define BMP580_CMD_EXTMODE_SEQ_1 0xB4
+#define BMP580_CMD_EXTMODE_SEQ_2 0x69
+#define BMP580_CMD_NVM_OP_SEQ_0 0x5D
+#define BMP580_CMD_NVM_READ_SEQ_1 0xA5
+#define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0
+#define BMP580_CMD_SOFT_RESET 0xB6
+
+#define BMP580_INT_STATUS_POR_MASK BIT(4)
+
+#define BMP580_STATUS_CORE_RDY_MASK BIT(0)
+#define BMP580_STATUS_NVM_RDY_MASK BIT(1)
+#define BMP580_STATUS_NVM_ERR_MASK BIT(2)
+#define BMP580_STATUS_NVM_CMD_ERR_MASK BIT(3)
+
+#define BMP580_OSR_PRESS_MASK GENMASK(5, 3)
+#define BMP580_OSR_TEMP_MASK GENMASK(2, 0)
+#define BMP580_OSR_PRESS_EN BIT(6)
+#define BMP580_EFF_OSR_PRESS_MASK GENMASK(5, 3)
+#define BMP580_EFF_OSR_TEMP_MASK GENMASK(2, 0)
+#define BMP580_EFF_OSR_VALID_ODR BIT(7)
+
+#define BMP580_ODR_MASK GENMASK(6, 2)
+#define BMP580_MODE_MASK GENMASK(1, 0)
+#define BMP580_MODE_SLEEP 0
+#define BMP580_MODE_NORMAL 1
+#define BMP580_MODE_FORCED 2
+#define BMP580_MODE_CONTINOUS 3
+#define BMP580_ODR_DEEPSLEEP_DIS BIT(7)
+
+#define BMP580_DSP_COMP_MASK GENMASK(1, 0)
+#define BMP580_DSP_COMP_DIS 0
+#define BMP580_DSP_TEMP_COMP_EN 1
+/*
+ * In section 7.27 of datasheet, modes 2 and 3 are technically the same.
+ * Pressure compensation means also enabling temperature compensation
+ */
+#define BMP580_DSP_PRESS_COMP_EN 2
+#define BMP580_DSP_PRESS_TEMP_COMP_EN 3
+#define BMP580_DSP_IIR_FORCED_FLUSH BIT(2)
+#define BMP580_DSP_SHDW_IIR_TEMP_EN BIT(3)
+#define BMP580_DSP_FIFO_IIR_TEMP_EN BIT(4)
+#define BMP580_DSP_SHDW_IIR_PRESS_EN BIT(5)
+#define BMP580_DSP_FIFO_IIR_PRESS_EN BIT(6)
+#define BMP580_DSP_OOR_IIR_PRESS_EN BIT(7)
+
+#define BMP580_DSP_IIR_PRESS_MASK GENMASK(5, 3)
+#define BMP580_DSP_IIR_TEMP_MASK GENMASK(2, 0)
+#define BMP580_FILTER_OFF 0
+#define BMP580_FILTER_1X 1
+#define BMP580_FILTER_3X 2
+#define BMP580_FILTER_7X 3
+#define BMP580_FILTER_15X 4
+#define BMP580_FILTER_31X 5
+#define BMP580_FILTER_63X 6
+#define BMP580_FILTER_127X 7
+
+#define BMP580_NVM_ROW_ADDR_MASK GENMASK(5, 0)
+#define BMP580_NVM_PROG_EN BIT(6)
+
+#define BMP580_TEMP_SKIPPED 0x7f7f7f
+#define BMP580_PRESS_SKIPPED 0x7f7f7f
/* BMP380 specific registers */
#define BMP380_REG_CMD 0x7E
@@ -181,6 +288,8 @@
#define BMP280_REG_ID 0xD0
#define BMP380_CHIP_ID 0x50
+#define BMP580_CHIP_ID 0x50
+#define BMP580_CHIP_ID_ALT 0x51
#define BMP180_CHIP_ID 0x55
#define BMP280_CHIP_ID 0x58
#define BME280_CHIP_ID 0x60
@@ -191,15 +300,177 @@
#define BMP280_PRESS_SKIPPED 0x80000
#define BMP280_HUMIDITY_SKIPPED 0x8000
+/* Core exported structs */
+
+static const char *const bmp280_supply_names[] = {
+ "vddd", "vdda"
+};
+
+#define BMP280_NUM_SUPPLIES ARRAY_SIZE(bmp280_supply_names)
+
+struct bmp180_calib {
+ s16 AC1;
+ s16 AC2;
+ s16 AC3;
+ u16 AC4;
+ u16 AC5;
+ u16 AC6;
+ s16 B1;
+ s16 B2;
+ s16 MB;
+ s16 MC;
+ s16 MD;
+};
+
+/* See datasheet Section 4.2.2. */
+struct bmp280_calib {
+ u16 T1;
+ s16 T2;
+ s16 T3;
+ u16 P1;
+ s16 P2;
+ s16 P3;
+ s16 P4;
+ s16 P5;
+ s16 P6;
+ s16 P7;
+ s16 P8;
+ s16 P9;
+ u8 H1;
+ s16 H2;
+ u8 H3;
+ s16 H4;
+ s16 H5;
+ s8 H6;
+};
+
+/* See datasheet Section 3.11.1. */
+struct bmp380_calib {
+ u16 T1;
+ u16 T2;
+ s8 T3;
+ s16 P1;
+ s16 P2;
+ s8 P3;
+ s8 P4;
+ u16 P5;
+ u16 P6;
+ s8 P7;
+ s8 P8;
+ s16 P9;
+ s8 P10;
+ s8 P11;
+};
+
+struct bmp280_data {
+ struct device *dev;
+ struct mutex lock;
+ struct regmap *regmap;
+ struct completion done;
+ bool use_eoc;
+ const struct bmp280_chip_info *chip_info;
+ union {
+ struct bmp180_calib bmp180;
+ struct bmp280_calib bmp280;
+ struct bmp380_calib bmp380;
+ } calib;
+ struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES];
+ unsigned int start_up_time; /* in microseconds */
+
+ /* log of base 2 of oversampling rate */
+ u8 oversampling_press;
+ u8 oversampling_temp;
+ u8 oversampling_humid;
+ u8 iir_filter_coeff;
+
+ /*
+ * BMP380 devices introduce sampling frequency configuration. See
+ * datasheet sections 3.3.3. and 4.3.19 for more details.
+ *
+ * BMx280 devices allowed indirect configuration of sampling frequency
+ * changing the t_standby duration between measurements, as detailed on
+ * section 3.6.3 of the datasheet.
+ */
+ int sampling_freq;
+
+ /*
+ * Carryover value from temperature conversion, used in pressure
+ * calculation.
+ */
+ s32 t_fine;
+
+ /*
+ * DMA (thus cache coherency maintenance) may require the
+ * transfer buffers to live in their own cache lines.
+ */
+ union {
+ /* Sensor data buffer */
+ u8 buf[3];
+ /* Calibration data buffers */
+ __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2];
+ __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2];
+ u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT];
+ /* Miscellaneous, endianess-aware data buffers */
+ __le16 le16;
+ __be16 be16;
+ } __aligned(IIO_DMA_MINALIGN);
+};
+
+struct bmp280_chip_info {
+ unsigned int id_reg;
+ const unsigned int chip_id;
+
+ const struct regmap_config *regmap_config;
+
+ const struct iio_chan_spec *channels;
+ int num_channels;
+ unsigned int start_up_time;
+
+ const int *oversampling_temp_avail;
+ int num_oversampling_temp_avail;
+ int oversampling_temp_default;
+
+ const int *oversampling_press_avail;
+ int num_oversampling_press_avail;
+ int oversampling_press_default;
+
+ const int *oversampling_humid_avail;
+ int num_oversampling_humid_avail;
+ int oversampling_humid_default;
+
+ const int *iir_filter_coeffs_avail;
+ int num_iir_filter_coeffs_avail;
+ int iir_filter_coeff_default;
+
+ const int (*sampling_freq_avail)[2];
+ int num_sampling_freq_avail;
+ int sampling_freq_default;
+
+ int (*chip_config)(struct bmp280_data *);
+ int (*read_temp)(struct bmp280_data *, int *, int *);
+ int (*read_press)(struct bmp280_data *, int *, int *);
+ int (*read_humid)(struct bmp280_data *, int *, int *);
+ int (*read_calib)(struct bmp280_data *);
+ int (*preinit)(struct bmp280_data *);
+};
+
+/* Chip infos for each variant */
+extern const struct bmp280_chip_info bmp180_chip_info;
+extern const struct bmp280_chip_info bmp280_chip_info;
+extern const struct bmp280_chip_info bme280_chip_info;
+extern const struct bmp280_chip_info bmp380_chip_info;
+extern const struct bmp280_chip_info bmp580_chip_info;
+
/* Regmap configurations */
extern const struct regmap_config bmp180_regmap_config;
extern const struct regmap_config bmp280_regmap_config;
extern const struct regmap_config bmp380_regmap_config;
+extern const struct regmap_config bmp580_regmap_config;
/* Probe called from different transports */
int bmp280_common_probe(struct device *dev,
struct regmap *regmap,
- unsigned int chip,
+ const struct bmp280_chip_info *,
const char *name,
int irq);
diff --git a/drivers/iio/pressure/zpa2326.c b/drivers/iio/pressure/zpa2326.c
index 67119a9b95fc..421e059d1f19 100644
--- a/drivers/iio/pressure/zpa2326.c
+++ b/drivers/iio/pressure/zpa2326.c
@@ -829,7 +829,7 @@ static irqreturn_t zpa2326_handle_threaded_irq(int irq, void *data)
}
/* New sample available: dispatch internal trigger consumers. */
- iio_trigger_poll_chained(priv->trigger);
+ iio_trigger_poll_nested(priv->trigger);
if (cont)
/*
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
index ebc95cf8f5f4..96fa97451cbf 100644
--- a/drivers/iio/proximity/as3935.c
+++ b/drivers/iio/proximity/as3935.c
@@ -257,7 +257,7 @@ static void as3935_event_work(struct work_struct *work)
switch (val) {
case AS3935_EVENT_INT:
- iio_trigger_poll_chained(st->trig);
+ iio_trigger_poll_nested(st->trig);
break;
case AS3935_DISTURB_INT:
case AS3935_NOISE_INT:
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
index 977cf17cec52..9a40ca32bb1c 100644
--- a/drivers/iio/proximity/sx9324.c
+++ b/drivers/iio/proximity/sx9324.c
@@ -783,73 +783,75 @@ static int sx9324_write_raw(struct iio_dev *indio_dev,
static const struct sx_common_reg_default sx9324_default_regs[] = {
{ SX9324_REG_IRQ_MSK, 0x00 },
- { SX9324_REG_IRQ_CFG0, 0x00 },
- { SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND },
- { SX9324_REG_IRQ_CFG2, 0x00 },
- { SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS },
+ { SX9324_REG_IRQ_CFG0, 0x00, "irq_cfg0" },
+ { SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND, "irq_cfg1" },
+ { SX9324_REG_IRQ_CFG2, 0x00, "irq_cfg2" },
+ { SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS, "gnrl_ctrl0" },
/*
* The lower 4 bits should not be set as it enable sensors measurements.
* Turning the detection on before the configuration values are set to
* good values can cause the device to return erroneous readings.
*/
- { SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL },
+ { SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL, "gnrl_ctrl1" },
- { SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST },
- { SX9324_REG_AFE_CTRL3, 0x00 },
+ { SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST, "afe_ctrl0" },
+ { SX9324_REG_AFE_CTRL3, 0x00, "afe_ctrl3" },
{ SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
- SX9324_REG_AFE_CTRL4_RES_100 },
- { SX9324_REG_AFE_CTRL6, 0x00 },
+ SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl4" },
+ { SX9324_REG_AFE_CTRL6, 0x00, "afe_ctrl6" },
{ SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
- SX9324_REG_AFE_CTRL4_RES_100 },
+ SX9324_REG_AFE_CTRL4_RES_100, "afe_ctrl7" },
/* TODO(gwendal): PHx use chip default or all grounded? */
- { SX9324_REG_AFE_PH0, 0x29 },
- { SX9324_REG_AFE_PH1, 0x26 },
- { SX9324_REG_AFE_PH2, 0x1a },
- { SX9324_REG_AFE_PH3, 0x16 },
+ { SX9324_REG_AFE_PH0, 0x29, "afe_ph0" },
+ { SX9324_REG_AFE_PH1, 0x26, "afe_ph1" },
+ { SX9324_REG_AFE_PH2, 0x1a, "afe_ph2" },
+ { SX9324_REG_AFE_PH3, 0x16, "afe_ph3" },
{ SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESERVED |
- SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM },
- { SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 },
+ SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM, "afe_ctrl8" },
+ { SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1, "afe_ctrl9" },
{ SX9324_REG_PROX_CTRL0,
SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
- SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
+ SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0" },
{ SX9324_REG_PROX_CTRL1,
SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
- SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
- { SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K },
+ SX9324_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl1" },
+ { SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K, "prox_ctrl2" },
{ SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES |
- SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K },
+ SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K, "prox_ctrl3" },
{ SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 |
- SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 },
- { SX9324_REG_PROX_CTRL5, 0x00 },
- { SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
- { SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
- { SX9324_REG_ADV_CTRL0, 0x00 },
- { SX9324_REG_ADV_CTRL1, 0x00 },
- { SX9324_REG_ADV_CTRL2, 0x00 },
- { SX9324_REG_ADV_CTRL3, 0x00 },
- { SX9324_REG_ADV_CTRL4, 0x00 },
+ SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256, "prox_ctrl4" },
+ { SX9324_REG_PROX_CTRL5, 0x00, "prox_ctrl5" },
+ { SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl6" },
+ { SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32, "prox_ctrl7" },
+ { SX9324_REG_ADV_CTRL0, 0x00, "adv_ctrl0" },
+ { SX9324_REG_ADV_CTRL1, 0x00, "adv_ctrl1" },
+ { SX9324_REG_ADV_CTRL2, 0x00, "adv_ctrl2" },
+ { SX9324_REG_ADV_CTRL3, 0x00, "adv_ctrl3" },
+ { SX9324_REG_ADV_CTRL4, 0x00, "adv_ctrl4" },
{ SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 |
- SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 },
- { SX9324_REG_ADV_CTRL6, 0x00 },
- { SX9324_REG_ADV_CTRL7, 0x00 },
- { SX9324_REG_ADV_CTRL8, 0x00 },
- { SX9324_REG_ADV_CTRL9, 0x00 },
+ SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1, "adv_ctrl5" },
+ { SX9324_REG_ADV_CTRL6, 0x00, "adv_ctrl6" },
+ { SX9324_REG_ADV_CTRL7, 0x00, "adv_ctrl7" },
+ { SX9324_REG_ADV_CTRL8, 0x00, "adv_ctrl8" },
+ { SX9324_REG_ADV_CTRL9, 0x00, "adv_ctrl9" },
/* Body/Table threshold */
- { SX9324_REG_ADV_CTRL10, 0x00 },
- { SX9324_REG_ADV_CTRL11, 0x00 },
- { SX9324_REG_ADV_CTRL12, 0x00 },
+ { SX9324_REG_ADV_CTRL10, 0x00, "adv_ctrl10" },
+ { SX9324_REG_ADV_CTRL11, 0x00, "adv_ctrl11" },
+ { SX9324_REG_ADV_CTRL12, 0x00, "adv_ctrl12" },
/* TODO(gwendal): SAR currenly disabled */
- { SX9324_REG_ADV_CTRL13, 0x00 },
- { SX9324_REG_ADV_CTRL14, 0x00 },
- { SX9324_REG_ADV_CTRL15, 0x00 },
- { SX9324_REG_ADV_CTRL16, 0x00 },
- { SX9324_REG_ADV_CTRL17, 0x00 },
- { SX9324_REG_ADV_CTRL18, 0x00 },
- { SX9324_REG_ADV_CTRL19, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
- { SX9324_REG_ADV_CTRL20, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
+ { SX9324_REG_ADV_CTRL13, 0x00, "adv_ctrl13" },
+ { SX9324_REG_ADV_CTRL14, 0x00, "adv_ctrl14" },
+ { SX9324_REG_ADV_CTRL15, 0x00, "adv_ctrl15" },
+ { SX9324_REG_ADV_CTRL16, 0x00, "adv_ctrl16" },
+ { SX9324_REG_ADV_CTRL17, 0x00, "adv_ctrl17" },
+ { SX9324_REG_ADV_CTRL18, 0x00, "adv_ctrl18" },
+ { SX9324_REG_ADV_CTRL19,
+ SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl19" },
+ { SX9324_REG_ADV_CTRL20,
+ SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION, "adv_ctrl20" },
};
/* Activate all channels and perform an initial compensation. */
@@ -889,13 +891,15 @@ sx9324_get_default_reg(struct device *dev, int idx,
const char *res;
memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def));
+
+ sx_common_get_raw_register_config(dev, reg_def);
switch (reg_def->reg) {
case SX9324_REG_AFE_PH0:
case SX9324_REG_AFE_PH1:
case SX9324_REG_AFE_PH2:
case SX9324_REG_AFE_PH3:
ph = reg_def->reg - SX9324_REG_AFE_PH0;
- scnprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph);
+ snprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph);
count = device_property_count_u32(dev, prop);
if (count != ARRAY_SIZE(pin_defs))
diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
index 6e19d22e6a01..a50d9176411a 100644
--- a/drivers/iio/proximity/sx9360.c
+++ b/drivers/iio/proximity/sx9360.c
@@ -663,37 +663,37 @@ static int sx9360_write_raw(struct iio_dev *indio_dev,
static const struct sx_common_reg_default sx9360_default_regs[] = {
{ SX9360_REG_IRQ_MSK, 0x00 },
- { SX9360_REG_IRQ_CFG, 0x00 },
+ { SX9360_REG_IRQ_CFG, 0x00, "irq_cfg" },
/*
* The lower 2 bits should not be set as it enable sensors measurements.
* Turning the detection on before the configuration values are set to
* good values can cause the device to return erroneous readings.
*/
- { SX9360_REG_GNRL_CTRL0, 0x00 },
- { SX9360_REG_GNRL_CTRL1, 0x00 },
- { SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS },
+ { SX9360_REG_GNRL_CTRL0, 0x00, "gnrl_ctrl0" },
+ { SX9360_REG_GNRL_CTRL1, 0x00, "gnrl_ctrl1" },
+ { SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS, "gnrl_ctrl2" },
- { SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS },
+ { SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS, "afe_ctrl0" },
{ SX9360_REG_AFE_PARAM0_PHR, SX9360_REG_AFE_PARAM0_RSVD |
- SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+ SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phr" },
{ SX9360_REG_AFE_PARAM1_PHR, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
- SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+ SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phr" },
{ SX9360_REG_AFE_PARAM0_PHM, SX9360_REG_AFE_PARAM0_RSVD |
- SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+ SX9360_REG_AFE_PARAM0_RESOLUTION_128, "afe_param0_phm" },
{ SX9360_REG_AFE_PARAM1_PHM, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
- SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+ SX9360_REG_AFE_PARAM1_FREQ_83_33HZ, "afe_param1_phm" },
{ SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL0_GAIN_1 |
- SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
+ SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phr" },
{ SX9360_REG_PROX_CTRL0_PHM, SX9360_REG_PROX_CTRL0_GAIN_1 |
- SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
- { SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K },
+ SX9360_REG_PROX_CTRL0_RAWFILT_1P50, "prox_ctrl0_phm" },
+ { SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K, "prox_ctrl1" },
{ SX9360_REG_PROX_CTRL2, SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES |
- SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K },
+ SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K, "prox_ctrl2" },
{ SX9360_REG_PROX_CTRL3, SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 |
- SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256 },
- { SX9360_REG_PROX_CTRL4, 0x00 },
- { SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32 },
+ SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256, "prox_ctrl3" },
+ { SX9360_REG_PROX_CTRL4, 0x00, "prox_ctrl4" },
+ { SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32, "prox_ctrl5" },
};
/* Activate all channels and perform an initial compensation. */
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
index 8794e75e5bf9..9b2cfcade6a4 100644
--- a/drivers/iio/proximity/sx9500.c
+++ b/drivers/iio/proximity/sx9500.c
@@ -1051,8 +1051,8 @@ MODULE_DEVICE_TABLE(i2c, sx9500_id);
static struct i2c_driver sx9500_driver = {
.driver = {
.name = SX9500_DRIVER_NAME,
- .acpi_match_table = ACPI_PTR(sx9500_acpi_match),
- .of_match_table = of_match_ptr(sx9500_of_match),
+ .acpi_match_table = sx9500_acpi_match,
+ .of_match_table = sx9500_of_match,
.pm = pm_sleep_ptr(&sx9500_pm_ops),
},
.probe_new = sx9500_probe,
diff --git a/drivers/iio/proximity/sx_common.c b/drivers/iio/proximity/sx_common.c
index eba9256730ec..fe07d1444ac3 100644
--- a/drivers/iio/proximity/sx_common.c
+++ b/drivers/iio/proximity/sx_common.c
@@ -424,6 +424,27 @@ static const struct iio_buffer_setup_ops sx_common_buffer_setup_ops = {
.postdisable = sx_common_buffer_postdisable,
};
+void sx_common_get_raw_register_config(struct device *dev,
+ struct sx_common_reg_default *reg_def)
+{
+#ifdef CONFIG_ACPI
+ struct acpi_device *adev = ACPI_COMPANION(dev);
+ u32 raw = 0, ret;
+ char prop[80];
+
+ if (!reg_def->property || !adev)
+ return;
+
+ snprintf(prop, ARRAY_SIZE(prop), "%s,reg_%s", acpi_device_hid(adev), reg_def->property);
+ ret = device_property_read_u32(dev, prop, &raw);
+ if (ret)
+ return;
+
+ reg_def->def = raw;
+#endif
+}
+EXPORT_SYMBOL_NS_GPL(sx_common_get_raw_register_config, SEMTECH_PROX);
+
#define SX_COMMON_SOFT_RESET 0xde
static int sx_common_init_device(struct device *dev, struct iio_dev *indio_dev)
diff --git a/drivers/iio/proximity/sx_common.h b/drivers/iio/proximity/sx_common.h
index 49d4517103b0..101b90e52ff2 100644
--- a/drivers/iio/proximity/sx_common.h
+++ b/drivers/iio/proximity/sx_common.h
@@ -8,6 +8,7 @@
#ifndef IIO_SX_COMMON_H
#define IIO_SX_COMMON_H
+#include <linux/acpi.h>
#include <linux/iio/iio.h>
#include <linux/iio/types.h>
#include <linux/regulator/consumer.h>
@@ -26,6 +27,7 @@ static_assert(SX_COMMON_MAX_NUM_CHANNELS < BITS_PER_LONG);
struct sx_common_reg_default {
u8 reg;
u8 def;
+ const char *property;
};
/**
@@ -101,7 +103,6 @@ struct sx_common_chip_info {
* @client: I2C client structure.
* @trig: IIO trigger object.
* @regmap: Register map.
- * @num_default_regs: Number of default registers to set at init.
* @chan_prox_stat: Last reading of the proximity status for each channel.
* We only send an event to user space when this changes.
* @trigger_enabled: True when the device trigger is enabled.
@@ -149,6 +150,9 @@ int sx_common_probe(struct i2c_client *client,
const struct sx_common_chip_info *chip_info,
const struct regmap_config *regmap_config);
+void sx_common_get_raw_register_config(struct device *dev,
+ struct sx_common_reg_default *reg_def);
+
/* 3 is the number of events defined by a single phase. */
extern const struct iio_event_spec sx_common_events[3];
diff --git a/drivers/iio/temperature/tmp117.c b/drivers/iio/temperature/tmp117.c
index f9b8f2b570f6..638e3a5bd6b8 100644
--- a/drivers/iio/temperature/tmp117.c
+++ b/drivers/iio/temperature/tmp117.c
@@ -16,6 +16,7 @@
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/limits.h>
+#include <linux/property.h>
#include <linux/iio/iio.h>
@@ -31,17 +32,19 @@
#define TMP117_REG_DEVICE_ID 0xF
#define TMP117_RESOLUTION_10UC 78125
-#define TMP117_DEVICE_ID 0x0117
#define MICRODEGREE_PER_10MILLIDEGREE 10000
+#define TMP116_DEVICE_ID 0x1116
+#define TMP117_DEVICE_ID 0x0117
+
struct tmp117_data {
struct i2c_client *client;
s16 calibbias;
};
static int tmp117_read_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *channel, int *val,
- int *val2, long mask)
+ struct iio_chan_spec const *channel, int *val,
+ int *val2, long mask)
{
struct tmp117_data *data = iio_priv(indio_dev);
s32 ret;
@@ -49,7 +52,7 @@ static int tmp117_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = i2c_smbus_read_word_swapped(data->client,
- TMP117_REG_TEMP);
+ TMP117_REG_TEMP);
if (ret < 0)
return ret;
*val = sign_extend32(ret, 15);
@@ -57,7 +60,7 @@ static int tmp117_read_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_CALIBBIAS:
ret = i2c_smbus_read_word_swapped(data->client,
- TMP117_REG_TEMP_OFFSET);
+ TMP117_REG_TEMP_OFFSET);
if (ret < 0)
return ret;
*val = sign_extend32(ret, 15);
@@ -79,9 +82,8 @@ static int tmp117_read_raw(struct iio_dev *indio_dev,
}
}
-static int tmp117_write_raw(struct iio_dev *indio_dev,
- struct iio_chan_spec const *channel, int val,
- int val2, long mask)
+static int tmp117_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec
+ const *channel, int val, int val2, long mask)
{
struct tmp117_data *data = iio_priv(indio_dev);
s16 off;
@@ -104,7 +106,16 @@ static const struct iio_chan_spec tmp117_channels[] = {
{
.type = IIO_TEMP,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_CALIBBIAS) | BIT(IIO_CHAN_INFO_SCALE),
+ BIT(IIO_CHAN_INFO_CALIBBIAS) |
+ BIT(IIO_CHAN_INFO_SCALE),
+ },
+};
+
+static const struct iio_chan_spec tmp116_channels[] = {
+ {
+ .type = IIO_TEMP,
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+ BIT(IIO_CHAN_INFO_SCALE),
},
};
@@ -115,23 +126,41 @@ static const struct iio_info tmp117_info = {
static int tmp117_identify(struct i2c_client *client)
{
+ const struct i2c_device_id *id;
+ unsigned long match_data;
int dev_id;
dev_id = i2c_smbus_read_word_swapped(client, TMP117_REG_DEVICE_ID);
if (dev_id < 0)
return dev_id;
- if (dev_id != TMP117_DEVICE_ID) {
- dev_err(&client->dev, "TMP117 not found\n");
- return -ENODEV;
+
+ switch (dev_id) {
+ case TMP116_DEVICE_ID:
+ case TMP117_DEVICE_ID:
+ return dev_id;
}
- return 0;
+
+ dev_info(&client->dev, "Unknown device id (0x%x), use fallback compatible\n",
+ dev_id);
+
+ match_data = (uintptr_t)device_get_match_data(&client->dev);
+ if (match_data)
+ return match_data;
+
+ id = i2c_client_get_device_id(client);
+ if (id)
+ return id->driver_data;
+
+ dev_err(&client->dev, "Failed to identify unsupported device\n");
+
+ return -ENODEV;
}
static int tmp117_probe(struct i2c_client *client)
{
struct tmp117_data *data;
struct iio_dev *indio_dev;
- int ret;
+ int ret, dev_id;
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -EOPNOTSUPP;
@@ -140,6 +169,8 @@ static int tmp117_probe(struct i2c_client *client)
if (ret < 0)
return ret;
+ dev_id = ret;
+
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
@@ -148,24 +179,35 @@ static int tmp117_probe(struct i2c_client *client)
data->client = client;
data->calibbias = 0;
- indio_dev->name = "tmp117";
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &tmp117_info;
- indio_dev->channels = tmp117_channels;
- indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
+ switch (dev_id) {
+ case TMP116_DEVICE_ID:
+ indio_dev->channels = tmp116_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tmp116_channels);
+ indio_dev->name = "tmp116";
+ break;
+ case TMP117_DEVICE_ID:
+ indio_dev->channels = tmp117_channels;
+ indio_dev->num_channels = ARRAY_SIZE(tmp117_channels);
+ indio_dev->name = "tmp117";
+ break;
+ }
return devm_iio_device_register(&client->dev, indio_dev);
}
static const struct of_device_id tmp117_of_match[] = {
- { .compatible = "ti,tmp117", },
+ { .compatible = "ti,tmp116", .data = (void *)TMP116_DEVICE_ID },
+ { .compatible = "ti,tmp117", .data = (void *)TMP117_DEVICE_ID },
{ }
};
MODULE_DEVICE_TABLE(of, tmp117_of_match);
static const struct i2c_device_id tmp117_id[] = {
- { "tmp117", 0 },
+ { "tmp116", TMP116_DEVICE_ID },
+ { "tmp117", TMP117_DEVICE_ID },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp117_id);
diff --git a/drivers/iio/trigger/iio-trig-loop.c b/drivers/iio/trigger/iio-trig-loop.c
index 96ec06bbe546..7aaed0611899 100644
--- a/drivers/iio/trigger/iio-trig-loop.c
+++ b/drivers/iio/trigger/iio-trig-loop.c
@@ -46,7 +46,7 @@ static int iio_loop_thread(void *data)
set_freezable();
do {
- iio_trigger_poll_chained(trig);
+ iio_trigger_poll_nested(trig);
} while (likely(!kthread_freezable_should_stop(NULL)));
return 0;
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 7a24c1444ace..0edf85ba055e 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -451,7 +451,7 @@ struct icc_path *of_icc_get_by_index(struct device *dev, int idx)
* When the consumer DT node do not have "interconnects" property
* return a NULL path to skip setting constraints.
*/
- if (!of_find_property(np, "interconnects", NULL))
+ if (!of_property_present(np, "interconnects"))
return NULL;
/*
@@ -544,7 +544,7 @@ struct icc_path *of_icc_get(struct device *dev, const char *name)
* When the consumer DT node do not have "interconnects" property
* return a NULL path to skip setting constraints.
*/
- if (!of_find_property(np, "interconnects", NULL))
+ if (!of_property_present(np, "interconnects"))
return NULL;
/*
@@ -911,52 +911,6 @@ out:
EXPORT_SYMBOL_GPL(icc_link_create);
/**
- * icc_link_destroy() - destroy a link between two nodes
- * @src: pointer to source node
- * @dst: pointer to destination node
- *
- * Return: 0 on success, or an error code otherwise
- */
-int icc_link_destroy(struct icc_node *src, struct icc_node *dst)
-{
- struct icc_node **new;
- size_t slot;
- int ret = 0;
-
- if (IS_ERR_OR_NULL(src))
- return -EINVAL;
-
- if (IS_ERR_OR_NULL(dst))
- return -EINVAL;
-
- mutex_lock(&icc_lock);
-
- for (slot = 0; slot < src->num_links; slot++)
- if (src->links[slot] == dst)
- break;
-
- if (WARN_ON(slot == src->num_links)) {
- ret = -ENXIO;
- goto out;
- }
-
- src->links[slot] = src->links[--src->num_links];
-
- new = krealloc(src->links, src->num_links * sizeof(*src->links),
- GFP_KERNEL);
- if (new)
- src->links = new;
- else
- ret = -ENOMEM;
-
-out:
- mutex_unlock(&icc_lock);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(icc_link_destroy);
-
-/**
* icc_node_add() - add interconnect node to interconnect provider
* @node: pointer to the interconnect node
* @provider: pointer to the interconnect provider
@@ -981,14 +935,17 @@ void icc_node_add(struct icc_node *node, struct icc_provider *provider)
node->avg_bw = node->init_avg;
node->peak_bw = node->init_peak;
- if (provider->pre_aggregate)
- provider->pre_aggregate(node);
+ if (node->avg_bw || node->peak_bw) {
+ if (provider->pre_aggregate)
+ provider->pre_aggregate(node);
- if (provider->aggregate)
- provider->aggregate(node, 0, node->init_avg, node->init_peak,
- &node->avg_bw, &node->peak_bw);
+ if (provider->aggregate)
+ provider->aggregate(node, 0, node->init_avg, node->init_peak,
+ &node->avg_bw, &node->peak_bw);
+ if (provider->set)
+ provider->set(node, node);
+ }
- provider->set(node, node);
node->avg_bw = 0;
node->peak_bw = 0;
@@ -1081,22 +1038,6 @@ void icc_provider_deregister(struct icc_provider *provider)
}
EXPORT_SYMBOL_GPL(icc_provider_deregister);
-int icc_provider_add(struct icc_provider *provider)
-{
- icc_provider_init(provider);
-
- return icc_provider_register(provider);
-}
-EXPORT_SYMBOL_GPL(icc_provider_add);
-
-void icc_provider_del(struct icc_provider *provider)
-{
- WARN_ON(!list_empty(&provider->nodes));
-
- icc_provider_deregister(provider);
-}
-EXPORT_SYMBOL_GPL(icc_provider_del);
-
static const struct of_device_id __maybe_unused ignore_list[] = {
{ .compatible = "qcom,sc7180-ipa-virt" },
{ .compatible = "qcom,sc8180x-ipa-virt" },
diff --git a/drivers/interconnect/qcom/Kconfig b/drivers/interconnect/qcom/Kconfig
index 92d65c7bda23..825b647d9169 100644
--- a/drivers/interconnect/qcom/Kconfig
+++ b/drivers/interconnect/qcom/Kconfig
@@ -83,7 +83,7 @@ config INTERCONNECT_QCOM_RPMH_POSSIBLE
default INTERCONNECT_QCOM
depends on QCOM_RPMH || (COMPILE_TEST && !QCOM_RPMH)
depends on QCOM_COMMAND_DB || (COMPILE_TEST && !QCOM_COMMAND_DB)
- depends on OF || COMPILE_TEST
+ depends on OF
help
Compile-testing RPMH drivers is possible on other platforms,
but in order to avoid link failures, drivers must not be built-in
diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 4180a06681b2..5341fa169dbf 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -11,7 +11,6 @@
#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
-#include <linux/pm_domain.h>
#include <linux/regmap.h>
#include <linux/slab.h>
@@ -48,6 +47,9 @@
#define NOC_QOS_MODEn_ADDR(n) (0xc + (n * 0x1000))
#define NOC_QOS_MODEn_MASK 0x3
+#define NOC_QOS_MODE_FIXED_VAL 0x0
+#define NOC_QOS_MODE_BYPASS_VAL 0x2
+
static int qcom_icc_set_qnoc_qos(struct icc_node *src, u64 max_bw)
{
struct icc_provider *provider = src->provider;
@@ -153,7 +155,7 @@ static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw)
struct qcom_icc_provider *qp;
struct qcom_icc_node *qn;
struct icc_provider *provider;
- u32 mode = NOC_QOS_MODE_BYPASS;
+ u32 mode = NOC_QOS_MODE_BYPASS_VAL;
int rc = 0;
qn = src->data;
@@ -167,18 +169,17 @@ static int qcom_icc_set_noc_qos(struct icc_node *src, u64 max_bw)
return 0;
}
- if (qn->qos.qos_mode != NOC_QOS_MODE_INVALID)
- mode = qn->qos.qos_mode;
-
- if (mode == NOC_QOS_MODE_FIXED) {
- dev_dbg(src->provider->dev, "NoC QoS: %s: Set Fixed mode\n",
- qn->name);
+ if (qn->qos.qos_mode == NOC_QOS_MODE_FIXED) {
+ dev_dbg(src->provider->dev, "NoC QoS: %s: Set Fixed mode\n", qn->name);
+ mode = NOC_QOS_MODE_FIXED_VAL;
rc = qcom_icc_noc_set_qos_priority(qp, &qn->qos);
if (rc)
return rc;
- } else if (mode == NOC_QOS_MODE_BYPASS) {
- dev_dbg(src->provider->dev, "NoC QoS: %s: Set Bypass mode\n",
- qn->name);
+ } else if (qn->qos.qos_mode == NOC_QOS_MODE_BYPASS) {
+ dev_dbg(src->provider->dev, "NoC QoS: %s: Set Bypass mode\n", qn->name);
+ mode = NOC_QOS_MODE_BYPASS_VAL;
+ } else {
+ /* How did we get here? */
}
return regmap_update_bits(qp->regmap,
@@ -244,7 +245,7 @@ static int __qcom_icc_set(struct icc_node *n, struct qcom_icc_node *qn,
ret = qcom_icc_rpm_set(qn->mas_rpm_id, qn->slv_rpm_id, sum_bw);
if (ret)
return ret;
- } else if (qn->qos.qos_mode != -1) {
+ } else if (qn->qos.qos_mode != NOC_QOS_MODE_INVALID) {
/* set bandwidth directly from the AP */
ret = qcom_icc_qos_set(n, sum_bw);
if (ret)
@@ -315,6 +316,7 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
{
struct icc_node *node;
struct qcom_icc_node *qn;
+ u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
int i;
/* Initialise aggregate values */
@@ -332,7 +334,11 @@ static void qcom_icc_bus_aggregate(struct icc_provider *provider,
list_for_each_entry(node, &provider->nodes, node_list) {
qn = node->data;
for (i = 0; i < QCOM_ICC_NUM_BUCKETS; i++) {
- agg_avg[i] += qn->sum_avg[i];
+ if (qn->channels)
+ sum_avg[i] = div_u64(qn->sum_avg[i], qn->channels);
+ else
+ sum_avg[i] = qn->sum_avg[i];
+ agg_avg[i] += sum_avg[i];
agg_peak[i] = max_t(u64, agg_peak[i], qn->max_peak[i]);
}
}
@@ -496,12 +502,6 @@ regmap_done:
if (ret)
return ret;
- if (desc->has_bus_pd) {
- ret = dev_pm_domain_attach(dev, true);
- if (ret)
- return ret;
- }
-
provider = &qp->provider;
provider->dev = dev;
provider->set = qcom_icc_set;
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index a49af844ab13..22bdb1e4bb12 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -23,12 +23,12 @@ enum qcom_icc_type {
/**
* struct qcom_icc_provider - Qualcomm specific interconnect provider
* @provider: generic interconnect provider
- * @bus_clks: the clk_bulk_data table of bus clocks
* @num_clks: the total number of clk_bulk_data entries
* @type: the ICC provider type
- * @qos_offset: offset to QoS registers
* @regmap: regmap for QoS registers read/write access
+ * @qos_offset: offset to QoS registers
* @bus_clk_rate: bus clock rate in Hz
+ * @bus_clks: the clk_bulk_data table of bus clocks
*/
struct qcom_icc_provider {
struct icc_provider provider;
@@ -66,6 +66,7 @@ struct qcom_icc_qos {
* @id: a unique node identifier
* @links: an array of nodes where we can go next while traversing
* @num_links: the total number of @links
+ * @channels: number of channels at this node (e.g. DDR channels)
* @buswidth: width of the interconnect between a node and the bus (bytes)
* @sum_avg: current sum aggregate value of all avg bw requests
* @max_peak: current max aggregate value of all peak bw requests
@@ -78,6 +79,7 @@ struct qcom_icc_node {
u16 id;
const u16 *links;
u16 num_links;
+ u16 channels;
u16 buswidth;
u64 sum_avg[QCOM_ICC_NUM_BUCKETS];
u64 max_peak[QCOM_ICC_NUM_BUCKETS];
@@ -91,16 +93,17 @@ struct qcom_icc_desc {
size_t num_nodes;
const char * const *clocks;
size_t num_clocks;
- bool has_bus_pd;
enum qcom_icc_type type;
const struct regmap_config *regmap_cfg;
unsigned int qos_offset;
};
-/* Valid for both NoC and BIMC */
-#define NOC_QOS_MODE_INVALID -1
-#define NOC_QOS_MODE_FIXED 0x0
-#define NOC_QOS_MODE_BYPASS 0x2
+/* Valid for all bus types */
+enum qos_mode {
+ NOC_QOS_MODE_INVALID = 0,
+ NOC_QOS_MODE_FIXED,
+ NOC_QOS_MODE_BYPASS,
+};
int qnoc_probe(struct platform_device *pdev);
int qnoc_remove(struct platform_device *pdev);
diff --git a/drivers/interconnect/qcom/msm8996.c b/drivers/interconnect/qcom/msm8996.c
index 25a1a32bc611..14efd2761b7a 100644
--- a/drivers/interconnect/qcom/msm8996.c
+++ b/drivers/interconnect/qcom/msm8996.c
@@ -1823,7 +1823,6 @@ static const struct qcom_icc_desc msm8996_a0noc = {
.num_nodes = ARRAY_SIZE(a0noc_nodes),
.clocks = bus_a0noc_clocks,
.num_clocks = ARRAY_SIZE(bus_a0noc_clocks),
- .has_bus_pd = true,
.regmap_cfg = &msm8996_a0noc_regmap_config
};
diff --git a/drivers/interconnect/qcom/osm-l3.c b/drivers/interconnect/qcom/osm-l3.c
index 1bafb54f1432..a1f4f918b911 100644
--- a/drivers/interconnect/qcom/osm-l3.c
+++ b/drivers/interconnect/qcom/osm-l3.c
@@ -14,13 +14,6 @@
#include <dt-bindings/interconnect/qcom,osm-l3.h>
-#include "sc7180.h"
-#include "sc7280.h"
-#include "sc8180x.h"
-#include "sdm845.h"
-#include "sm8150.h"
-#include "sm8250.h"
-
#define LUT_MAX_ENTRIES 40U
#define LUT_SRC GENMASK(31, 30)
#define LUT_L_VAL GENMASK(7, 0)
diff --git a/drivers/interconnect/qcom/sc7180.h b/drivers/interconnect/qcom/sc7180.h
index 7a2b3eb00923..2b718922c109 100644
--- a/drivers/interconnect/qcom/sc7180.h
+++ b/drivers/interconnect/qcom/sc7180.h
@@ -145,7 +145,5 @@
#define SC7180_SLAVE_SERVICE_SNOC 134
#define SC7180_SLAVE_QDSS_STM 135
#define SC7180_SLAVE_TCU 136
-#define SC7180_MASTER_OSM_L3_APPS 137
-#define SC7180_SLAVE_OSM_L3 138
#endif
diff --git a/drivers/interconnect/qcom/sc7280.h b/drivers/interconnect/qcom/sc7280.h
index 1fb9839b2c14..175e400305c5 100644
--- a/drivers/interconnect/qcom/sc7280.h
+++ b/drivers/interconnect/qcom/sc7280.h
@@ -150,7 +150,5 @@
#define SC7280_SLAVE_PCIE_1 139
#define SC7280_SLAVE_QDSS_STM 140
#define SC7280_SLAVE_TCU 141
-#define SC7280_MASTER_EPSS_L3_APPS 142
-#define SC7280_SLAVE_EPSS_L3 143
#endif
diff --git a/drivers/interconnect/qcom/sc8180x.h b/drivers/interconnect/qcom/sc8180x.h
index c138dcd350f1..f8d90598335a 100644
--- a/drivers/interconnect/qcom/sc8180x.h
+++ b/drivers/interconnect/qcom/sc8180x.h
@@ -168,8 +168,6 @@
#define SC8180X_SLAVE_EBI_CH0_DISPLAY 158
#define SC8180X_SLAVE_MNOC_SF_MEM_NOC_DISPLAY 159
#define SC8180X_SLAVE_MNOC_HF_MEM_NOC_DISPLAY 160
-#define SC8180X_MASTER_OSM_L3_APPS 161
-#define SC8180X_SLAVE_OSM_L3 162
#define SC8180X_MASTER_QUP_CORE_0 163
#define SC8180X_MASTER_QUP_CORE_1 164
diff --git a/drivers/interconnect/qcom/sdm845.h b/drivers/interconnect/qcom/sdm845.h
index 776e9c2acb27..bc7e425ce985 100644
--- a/drivers/interconnect/qcom/sdm845.h
+++ b/drivers/interconnect/qcom/sdm845.h
@@ -136,7 +136,5 @@
#define SDM845_SLAVE_SERVICE_SNOC 128
#define SDM845_SLAVE_QDSS_STM 129
#define SDM845_SLAVE_TCU 130
-#define SDM845_MASTER_OSM_L3_APPS 131
-#define SDM845_SLAVE_OSM_L3 132
#endif /* __DRIVERS_INTERCONNECT_QCOM_SDM845_H__ */
diff --git a/drivers/interconnect/qcom/sm8150.h b/drivers/interconnect/qcom/sm8150.h
index 023161681fb8..1d587c94eb06 100644
--- a/drivers/interconnect/qcom/sm8150.h
+++ b/drivers/interconnect/qcom/sm8150.h
@@ -148,7 +148,5 @@
#define SM8150_SLAVE_VSENSE_CTRL_CFG 137
#define SM8150_SNOC_CNOC_MAS 138
#define SM8150_SNOC_CNOC_SLV 139
-#define SM8150_MASTER_OSM_L3_APPS 140
-#define SM8150_SLAVE_OSM_L3 141
#endif
diff --git a/drivers/interconnect/qcom/sm8250.h b/drivers/interconnect/qcom/sm8250.h
index e3fc56bc7ca0..209ab195f21f 100644
--- a/drivers/interconnect/qcom/sm8250.h
+++ b/drivers/interconnect/qcom/sm8250.h
@@ -158,7 +158,5 @@
#define SM8250_SLAVE_VSENSE_CTRL_CFG 147
#define SM8250_SNOC_CNOC_MAS 148
#define SM8250_SNOC_CNOC_SLV 149
-#define SM8250_MASTER_EPSS_L3_APPS 150
-#define SM8250_SLAVE_EPSS_L3 151
#endif
diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
index 0b5e181998c9..807c98de40d4 100644
--- a/drivers/iommu/iommu.c
+++ b/drivers/iommu/iommu.c
@@ -28,6 +28,7 @@
#include <linux/fsl/mc.h>
#include <linux/module.h>
#include <linux/cc_platform.h>
+#include <linux/cdx/cdx_bus.h>
#include <trace/events/iommu.h>
#include <linux/sched/mm.h>
#include <linux/msi.h>
@@ -129,6 +130,9 @@ static struct bus_type * const iommu_buses[] = {
#ifdef CONFIG_TEGRA_HOST1X_CONTEXT_BUS
&host1x_context_device_bus_type,
#endif
+#ifdef CONFIG_CDX_BUS
+ &cdx_bus_type,
+#endif
};
/*
diff --git a/drivers/mcb/mcb-lpc.c b/drivers/mcb/mcb-lpc.c
index 53decd89876e..a851e0236464 100644
--- a/drivers/mcb/mcb-lpc.c
+++ b/drivers/mcb/mcb-lpc.c
@@ -23,7 +23,7 @@ static int mcb_lpc_probe(struct platform_device *pdev)
{
struct resource *res;
struct priv *priv;
- int ret = 0;
+ int ret = 0, table_size;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -58,16 +58,43 @@ static int mcb_lpc_probe(struct platform_device *pdev)
ret = chameleon_parse_cells(priv->bus, priv->mem->start, priv->base);
if (ret < 0) {
- mcb_release_bus(priv->bus);
- return ret;
+ goto out_mcb_bus;
}
- dev_dbg(&pdev->dev, "Found %d cells\n", ret);
+ table_size = ret;
+
+ if (table_size < CHAM_HEADER_SIZE) {
+ /* Release the previous resources */
+ devm_iounmap(&pdev->dev, priv->base);
+ devm_release_mem_region(&pdev->dev, priv->mem->start, resource_size(priv->mem));
+
+ /* Then, allocate it again with the actual chameleon table size */
+ res = devm_request_mem_region(&pdev->dev, priv->mem->start,
+ table_size,
+ KBUILD_MODNAME);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to request PCI memory\n");
+ ret = -EBUSY;
+ goto out_mcb_bus;
+ }
+
+ priv->base = devm_ioremap(&pdev->dev, priv->mem->start, table_size);
+ if (!priv->base) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ ret = -ENOMEM;
+ goto out_mcb_bus;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ }
mcb_bus_add_devices(priv->bus);
return 0;
+out_mcb_bus:
+ mcb_release_bus(priv->bus);
+ return ret;
}
static int mcb_lpc_remove(struct platform_device *pdev)
diff --git a/drivers/mcb/mcb-parse.c b/drivers/mcb/mcb-parse.c
index aa6938da0db8..2aef990f379f 100644
--- a/drivers/mcb/mcb-parse.c
+++ b/drivers/mcb/mcb-parse.c
@@ -130,7 +130,7 @@ static void chameleon_parse_bar(void __iomem *base,
}
}
-static int chameleon_get_bar(char __iomem **base, phys_addr_t mapbase,
+static int chameleon_get_bar(void __iomem **base, phys_addr_t mapbase,
struct chameleon_bar **cb)
{
struct chameleon_bar *c;
@@ -179,12 +179,13 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
{
struct chameleon_fpga_header *header;
struct chameleon_bar *cb;
- char __iomem *p = base;
+ void __iomem *p = base;
int num_cells = 0;
uint32_t dtype;
int bar_count;
int ret;
u32 hsize;
+ u32 table_size;
hsize = sizeof(struct chameleon_fpga_header);
@@ -239,12 +240,16 @@ int chameleon_parse_cells(struct mcb_bus *bus, phys_addr_t mapbase,
num_cells++;
}
- if (num_cells == 0)
- num_cells = -EINVAL;
+ if (num_cells == 0) {
+ ret = -EINVAL;
+ goto free_bar;
+ }
+ table_size = p - base;
+ pr_debug("%d cell(s) found. Chameleon table size: 0x%04x bytes\n", num_cells, table_size);
kfree(cb);
kfree(header);
- return num_cells;
+ return table_size;
free_bar:
kfree(cb);
diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c
index dc88232d9af8..53d9202ff9a7 100644
--- a/drivers/mcb/mcb-pci.c
+++ b/drivers/mcb/mcb-pci.c
@@ -31,7 +31,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct resource *res;
struct priv *priv;
- int ret;
+ int ret, table_size;
unsigned long flags;
priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL);
@@ -90,7 +90,30 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
if (ret < 0)
goto out_mcb_bus;
- dev_dbg(&pdev->dev, "Found %d cells\n", ret);
+ table_size = ret;
+
+ if (table_size < CHAM_HEADER_SIZE) {
+ /* Release the previous resources */
+ devm_iounmap(&pdev->dev, priv->base);
+ devm_release_mem_region(&pdev->dev, priv->mapbase, CHAM_HEADER_SIZE);
+
+ /* Then, allocate it again with the actual chameleon table size */
+ res = devm_request_mem_region(&pdev->dev, priv->mapbase,
+ table_size,
+ KBUILD_MODNAME);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to request PCI memory\n");
+ ret = -EBUSY;
+ goto out_mcb_bus;
+ }
+
+ priv->base = devm_ioremap(&pdev->dev, priv->mapbase, table_size);
+ if (!priv->base) {
+ dev_err(&pdev->dev, "Cannot ioremap\n");
+ ret = -ENOMEM;
+ goto out_mcb_bus;
+ }
+ }
mcb_bus_add_devices(priv->bus);
diff --git a/drivers/misc/cardreader/alcor_pci.c b/drivers/misc/cardreader/alcor_pci.c
index 9080f9f150a2..0142c4bf4f42 100644
--- a/drivers/misc/cardreader/alcor_pci.c
+++ b/drivers/misc/cardreader/alcor_pci.c
@@ -95,160 +95,6 @@ u32 alcor_read32be(struct alcor_pci_priv *priv, unsigned int addr)
}
EXPORT_SYMBOL_GPL(alcor_read32be);
-static int alcor_pci_find_cap_offset(struct alcor_pci_priv *priv,
- struct pci_dev *pci)
-{
- int where;
- u8 val8;
- u32 val32;
-
- where = ALCOR_CAP_START_OFFSET;
- pci_read_config_byte(pci, where, &val8);
- if (!val8)
- return 0;
-
- where = (int)val8;
- while (1) {
- pci_read_config_dword(pci, where, &val32);
- if (val32 == 0xffffffff) {
- dev_dbg(priv->dev, "find_cap_offset invalid value %x.\n",
- val32);
- return 0;
- }
-
- if ((val32 & 0xff) == 0x10) {
- dev_dbg(priv->dev, "pcie cap offset: %x\n", where);
- return where;
- }
-
- if ((val32 & 0xff00) == 0x00) {
- dev_dbg(priv->dev, "pci_find_cap_offset invalid value %x.\n",
- val32);
- break;
- }
- where = (int)((val32 >> 8) & 0xff);
- }
-
- return 0;
-}
-
-static void alcor_pci_init_check_aspm(struct alcor_pci_priv *priv)
-{
- struct pci_dev *pci;
- int where;
- u32 val32;
-
- priv->pdev_cap_off = alcor_pci_find_cap_offset(priv, priv->pdev);
- /*
- * A device might be attached to root complex directly and
- * priv->parent_pdev will be NULL. In this case we don't check its
- * capability and disable ASPM completely.
- */
- if (priv->parent_pdev)
- priv->parent_cap_off = alcor_pci_find_cap_offset(priv,
- priv->parent_pdev);
-
- if ((priv->pdev_cap_off == 0) || (priv->parent_cap_off == 0)) {
- dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n",
- priv->pdev_cap_off, priv->parent_cap_off);
- return;
- }
-
- /* link capability */
- pci = priv->pdev;
- where = priv->pdev_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET;
- pci_read_config_dword(pci, where, &val32);
- priv->pdev_aspm_cap = (u8)(val32 >> 10) & 0x03;
-
- pci = priv->parent_pdev;
- where = priv->parent_cap_off + ALCOR_PCIE_LINK_CAP_OFFSET;
- pci_read_config_dword(pci, where, &val32);
- priv->parent_aspm_cap = (u8)(val32 >> 10) & 0x03;
-
- if (priv->pdev_aspm_cap != priv->parent_aspm_cap) {
- u8 aspm_cap;
-
- dev_dbg(priv->dev, "pdev_aspm_cap: %x, parent_aspm_cap: %x\n",
- priv->pdev_aspm_cap, priv->parent_aspm_cap);
- aspm_cap = priv->pdev_aspm_cap & priv->parent_aspm_cap;
- priv->pdev_aspm_cap = aspm_cap;
- priv->parent_aspm_cap = aspm_cap;
- }
-
- dev_dbg(priv->dev, "ext_config_dev_aspm: %x, pdev_aspm_cap: %x\n",
- priv->ext_config_dev_aspm, priv->pdev_aspm_cap);
- priv->ext_config_dev_aspm &= priv->pdev_aspm_cap;
-}
-
-static void alcor_pci_aspm_ctrl(struct alcor_pci_priv *priv, u8 aspm_enable)
-{
- struct pci_dev *pci;
- u8 aspm_ctrl, i;
- int where;
- u32 val32;
-
- if ((!priv->pdev_cap_off) || (!priv->parent_cap_off)) {
- dev_dbg(priv->dev, "pci_cap_off: %x, parent_cap_off: %x\n",
- priv->pdev_cap_off, priv->parent_cap_off);
- return;
- }
-
- if (!priv->pdev_aspm_cap)
- return;
-
- aspm_ctrl = 0;
- if (aspm_enable) {
- aspm_ctrl = priv->ext_config_dev_aspm;
-
- if (!aspm_ctrl) {
- dev_dbg(priv->dev, "aspm_ctrl == 0\n");
- return;
- }
- }
-
- for (i = 0; i < 2; i++) {
-
- if (i) {
- pci = priv->parent_pdev;
- where = priv->parent_cap_off
- + ALCOR_PCIE_LINK_CTRL_OFFSET;
- } else {
- pci = priv->pdev;
- where = priv->pdev_cap_off
- + ALCOR_PCIE_LINK_CTRL_OFFSET;
- }
-
- pci_read_config_dword(pci, where, &val32);
- val32 &= (~0x03);
- val32 |= (aspm_ctrl & priv->pdev_aspm_cap);
- pci_write_config_byte(pci, where, (u8)val32);
- }
-
-}
-
-static inline void alcor_mask_sd_irqs(struct alcor_pci_priv *priv)
-{
- alcor_write32(priv, 0, AU6601_REG_INT_ENABLE);
-}
-
-static inline void alcor_unmask_sd_irqs(struct alcor_pci_priv *priv)
-{
- alcor_write32(priv, AU6601_INT_CMD_MASK | AU6601_INT_DATA_MASK |
- AU6601_INT_CARD_INSERT | AU6601_INT_CARD_REMOVE |
- AU6601_INT_OVER_CURRENT_ERR,
- AU6601_REG_INT_ENABLE);
-}
-
-static inline void alcor_mask_ms_irqs(struct alcor_pci_priv *priv)
-{
- alcor_write32(priv, 0, AU6601_MS_INT_ENABLE);
-}
-
-static inline void alcor_unmask_ms_irqs(struct alcor_pci_priv *priv)
-{
- alcor_write32(priv, 0x3d00fa, AU6601_MS_INT_ENABLE);
-}
-
static int alcor_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -308,7 +154,6 @@ static int alcor_pci_probe(struct pci_dev *pdev,
pci_set_master(pdev);
pci_set_drvdata(pdev, priv);
- alcor_pci_init_check_aspm(priv);
for (i = 0; i < ARRAY_SIZE(alcor_pci_cells); i++) {
alcor_pci_cells[i].platform_data = priv;
@@ -319,7 +164,7 @@ static int alcor_pci_probe(struct pci_dev *pdev,
if (ret < 0)
goto error_clear_drvdata;
- alcor_pci_aspm_ctrl(priv, 0);
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
return 0;
@@ -339,8 +184,6 @@ static void alcor_pci_remove(struct pci_dev *pdev)
priv = pci_get_drvdata(pdev);
- alcor_pci_aspm_ctrl(priv, 1);
-
mfd_remove_devices(&pdev->dev);
ida_free(&alcor_pci_idr, priv->id);
@@ -353,18 +196,16 @@ static void alcor_pci_remove(struct pci_dev *pdev)
#ifdef CONFIG_PM_SLEEP
static int alcor_suspend(struct device *dev)
{
- struct alcor_pci_priv *priv = dev_get_drvdata(dev);
-
- alcor_pci_aspm_ctrl(priv, 1);
return 0;
}
static int alcor_resume(struct device *dev)
{
-
struct alcor_pci_priv *priv = dev_get_drvdata(dev);
- alcor_pci_aspm_ctrl(priv, 0);
+ pci_disable_link_state(priv->pdev,
+ PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1);
+
return 0;
}
#endif /* CONFIG_PM_SLEEP */
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index 02628288cd0f..b03010810b89 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -19,7 +19,6 @@
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/err.h>
-#include <linux/aer.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/wait.h>
@@ -1099,7 +1098,6 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
}
pci_set_master(pci_dev);
- pci_enable_pcie_error_reporting(pci_dev);
/* EEH recovery requires PCIe fundamental reset */
pci_dev->needs_freset = 1;
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 2c3a991d6e88..2fde8d63c5fe 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -392,12 +392,6 @@ static inline int is_db_reset(int db_out)
return db_out & (1 << DB_RESET);
}
-static inline int is_device_reset(struct ilo_hwinfo *hw)
-{
- /* check for global reset condition */
- return is_db_reset(get_device_outbound(hw));
-}
-
static inline void clear_pending_db(struct ilo_hwinfo *hw, int clr)
{
iowrite32(clr, &hw->mmio_vaddr[DB_OUT]);
diff --git a/drivers/misc/lis3lv02d/lis3lv02d.c b/drivers/misc/lis3lv02d/lis3lv02d.c
index 3a7808b796b1..299d316f1bda 100644
--- a/drivers/misc/lis3lv02d/lis3lv02d.c
+++ b/drivers/misc/lis3lv02d/lis3lv02d.c
@@ -965,19 +965,19 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3)
if (!pdata)
return -ENOMEM;
- if (of_get_property(np, "st,click-single-x", NULL))
+ if (of_property_read_bool(np, "st,click-single-x"))
pdata->click_flags |= LIS3_CLICK_SINGLE_X;
- if (of_get_property(np, "st,click-double-x", NULL))
+ if (of_property_read_bool(np, "st,click-double-x"))
pdata->click_flags |= LIS3_CLICK_DOUBLE_X;
- if (of_get_property(np, "st,click-single-y", NULL))
+ if (of_property_read_bool(np, "st,click-single-y"))
pdata->click_flags |= LIS3_CLICK_SINGLE_Y;
- if (of_get_property(np, "st,click-double-y", NULL))
+ if (of_property_read_bool(np, "st,click-double-y"))
pdata->click_flags |= LIS3_CLICK_DOUBLE_Y;
- if (of_get_property(np, "st,click-single-z", NULL))
+ if (of_property_read_bool(np, "st,click-single-z"))
pdata->click_flags |= LIS3_CLICK_SINGLE_Z;
- if (of_get_property(np, "st,click-double-z", NULL))
+ if (of_property_read_bool(np, "st,click-double-z"))
pdata->click_flags |= LIS3_CLICK_DOUBLE_Z;
if (!of_property_read_u32(np, "st,click-threshold-x", &val))
@@ -994,31 +994,31 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3)
if (!of_property_read_u32(np, "st,click-window", &val))
pdata->click_window = val;
- if (of_get_property(np, "st,irq1-disable", NULL))
+ if (of_property_read_bool(np, "st,irq1-disable"))
pdata->irq_cfg |= LIS3_IRQ1_DISABLE;
- if (of_get_property(np, "st,irq1-ff-wu-1", NULL))
+ if (of_property_read_bool(np, "st,irq1-ff-wu-1"))
pdata->irq_cfg |= LIS3_IRQ1_FF_WU_1;
- if (of_get_property(np, "st,irq1-ff-wu-2", NULL))
+ if (of_property_read_bool(np, "st,irq1-ff-wu-2"))
pdata->irq_cfg |= LIS3_IRQ1_FF_WU_2;
- if (of_get_property(np, "st,irq1-data-ready", NULL))
+ if (of_property_read_bool(np, "st,irq1-data-ready"))
pdata->irq_cfg |= LIS3_IRQ1_DATA_READY;
- if (of_get_property(np, "st,irq1-click", NULL))
+ if (of_property_read_bool(np, "st,irq1-click"))
pdata->irq_cfg |= LIS3_IRQ1_CLICK;
- if (of_get_property(np, "st,irq2-disable", NULL))
+ if (of_property_read_bool(np, "st,irq2-disable"))
pdata->irq_cfg |= LIS3_IRQ2_DISABLE;
- if (of_get_property(np, "st,irq2-ff-wu-1", NULL))
+ if (of_property_read_bool(np, "st,irq2-ff-wu-1"))
pdata->irq_cfg |= LIS3_IRQ2_FF_WU_1;
- if (of_get_property(np, "st,irq2-ff-wu-2", NULL))
+ if (of_property_read_bool(np, "st,irq2-ff-wu-2"))
pdata->irq_cfg |= LIS3_IRQ2_FF_WU_2;
- if (of_get_property(np, "st,irq2-data-ready", NULL))
+ if (of_property_read_bool(np, "st,irq2-data-ready"))
pdata->irq_cfg |= LIS3_IRQ2_DATA_READY;
- if (of_get_property(np, "st,irq2-click", NULL))
+ if (of_property_read_bool(np, "st,irq2-click"))
pdata->irq_cfg |= LIS3_IRQ2_CLICK;
- if (of_get_property(np, "st,irq-open-drain", NULL))
+ if (of_property_read_bool(np, "st,irq-open-drain"))
pdata->irq_cfg |= LIS3_IRQ_OPEN_DRAIN;
- if (of_get_property(np, "st,irq-active-low", NULL))
+ if (of_property_read_bool(np, "st,irq-active-low"))
pdata->irq_cfg |= LIS3_IRQ_ACTIVE_LOW;
if (!of_property_read_u32(np, "st,wu-duration-1", &val))
@@ -1026,32 +1026,32 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3)
if (!of_property_read_u32(np, "st,wu-duration-2", &val))
pdata->duration2 = val;
- if (of_get_property(np, "st,wakeup-x-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup-x-lo"))
pdata->wakeup_flags |= LIS3_WAKEUP_X_LO;
- if (of_get_property(np, "st,wakeup-x-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup-x-hi"))
pdata->wakeup_flags |= LIS3_WAKEUP_X_HI;
- if (of_get_property(np, "st,wakeup-y-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup-y-lo"))
pdata->wakeup_flags |= LIS3_WAKEUP_Y_LO;
- if (of_get_property(np, "st,wakeup-y-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup-y-hi"))
pdata->wakeup_flags |= LIS3_WAKEUP_Y_HI;
- if (of_get_property(np, "st,wakeup-z-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup-z-lo"))
pdata->wakeup_flags |= LIS3_WAKEUP_Z_LO;
- if (of_get_property(np, "st,wakeup-z-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup-z-hi"))
pdata->wakeup_flags |= LIS3_WAKEUP_Z_HI;
if (of_get_property(np, "st,wakeup-threshold", &val))
pdata->wakeup_thresh = val;
- if (of_get_property(np, "st,wakeup2-x-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-x-lo"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_X_LO;
- if (of_get_property(np, "st,wakeup2-x-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-x-hi"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_X_HI;
- if (of_get_property(np, "st,wakeup2-y-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-y-lo"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_Y_LO;
- if (of_get_property(np, "st,wakeup2-y-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-y-hi"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_Y_HI;
- if (of_get_property(np, "st,wakeup2-z-lo", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-z-lo"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_Z_LO;
- if (of_get_property(np, "st,wakeup2-z-hi", NULL))
+ if (of_property_read_bool(np, "st,wakeup2-z-hi"))
pdata->wakeup_flags2 |= LIS3_WAKEUP_Z_HI;
if (of_get_property(np, "st,wakeup2-threshold", &val))
pdata->wakeup_thresh2 = val;
@@ -1073,9 +1073,9 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3)
}
}
- if (of_get_property(np, "st,hipass1-disable", NULL))
+ if (of_property_read_bool(np, "st,hipass1-disable"))
pdata->hipass_ctrl |= LIS3_HIPASS1_DISABLE;
- if (of_get_property(np, "st,hipass2-disable", NULL))
+ if (of_property_read_bool(np, "st,hipass2-disable"))
pdata->hipass_ctrl |= LIS3_HIPASS2_DISABLE;
if (of_property_read_s32(np, "st,axis-x", &sval) == 0)
@@ -1085,7 +1085,7 @@ int lis3lv02d_init_dt(struct lis3lv02d *lis3)
if (of_property_read_s32(np, "st,axis-z", &sval) == 0)
pdata->axis_z = sval;
- if (of_get_property(np, "st,default-rate", NULL))
+ if (of_property_read_u32(np, "st,default-rate", &val) == 0)
pdata->default_rate = val;
if (of_property_read_s32(np, "st,min-limit-x", &sval) == 0)
diff --git a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
index 3389803cb281..e616e3ec2b42 100644
--- a/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
+++ b/drivers/misc/mchp_pci1xxxx/mchp_pci1xxxx_gpio.c
@@ -175,9 +175,13 @@ static void pci1xxxx_gpio_irq_set_mask(struct irq_data *data, bool set)
unsigned int gpio = irqd_to_hwirq(data);
unsigned long flags;
+ if (!set)
+ gpiochip_enable_irq(chip, gpio);
spin_lock_irqsave(&priv->lock, flags);
pci1xxx_assign_bit(priv->reg_base, INTR_MASK_OFFSET(gpio), (gpio % 32), set);
spin_unlock_irqrestore(&priv->lock, flags);
+ if (set)
+ gpiochip_disable_irq(chip, gpio);
}
static void pci1xxxx_gpio_irq_mask(struct irq_data *data)
@@ -283,12 +287,14 @@ static irqreturn_t pci1xxxx_gpio_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-static struct irq_chip pci1xxxx_gpio_irqchip = {
+static const struct irq_chip pci1xxxx_gpio_irqchip = {
.name = "pci1xxxx_gpio",
.irq_ack = pci1xxxx_gpio_irq_ack,
.irq_mask = pci1xxxx_gpio_irq_mask,
.irq_unmask = pci1xxxx_gpio_irq_unmask,
.irq_set_type = pci1xxxx_gpio_set_type,
+ .flags = IRQCHIP_IMMUTABLE,
+ GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
static int pci1xxxx_gpio_suspend(struct device *dev)
@@ -351,7 +357,7 @@ static int pci1xxxx_gpio_setup(struct pci1xxxx_gpio *priv, int irq)
return retval;
girq = &priv->gpio.irq;
- girq->chip = &pci1xxxx_gpio_irqchip;
+ gpio_irq_chip_set_chip(girq, &pci1xxxx_gpio_irqchip);
girq->parent_handler = NULL;
girq->num_parents = 0;
girq->parents = NULL;
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 211536109308..31e3c74ca1f1 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -9,8 +9,8 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/slab.h>
-#include <linux/uuid.h>
+#include <linux/mei.h>
#include <linux/mei_cl_bus.h>
#include "mei_dev.h"
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
index 7728fe685476..85cbfc3413ee 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -18,7 +18,7 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/uuid.h>
+#include <linux/mei.h>
#include <linux/mei_cl_bus.h>
#include <linux/component.h>
#include <drm/drm_connector.h>
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index 319418ddf4fb..e910302fcd1f 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -7,7 +7,7 @@
#ifndef _MEI_HW_TYPES_H_
#define _MEI_HW_TYPES_H_
-#include <linux/uuid.h>
+#include <linux/mei.h>
/*
* Timeouts in Seconds
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index 76c771a424f7..51876da3fd65 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -18,7 +18,6 @@
#include <linux/ioctl.h>
#include <linux/cdev.h>
#include <linux/sched/signal.h>
-#include <linux/uuid.h>
#include <linux/compat.h>
#include <linux/jiffies.h>
#include <linux/interrupt.h>
diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c
index 7ee1fa7b1cb3..3bf560bbdee0 100644
--- a/drivers/misc/mei/pxp/mei_pxp.c
+++ b/drivers/misc/mei/pxp/mei_pxp.c
@@ -13,7 +13,7 @@
#include <linux/module.h>
#include <linux/slab.h>
-#include <linux/uuid.h>
+#include <linux/mei.h>
#include <linux/mei_cl_bus.h>
#include <linux/component.h>
#include <drm/drm_connector.h>
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index b2c3c22fc13c..6da509d692bb 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -93,7 +93,7 @@ int xpc_disengage_timelimit = XPC_DISENGAGE_DEFAULT_TIMELIMIT;
static int xpc_disengage_min_timelimit; /* = 0 */
static int xpc_disengage_max_timelimit = 120;
-static struct ctl_table xpc_sys_xpc_hb_dir[] = {
+static struct ctl_table xpc_sys_xpc_hb[] = {
{
.procname = "hb_interval",
.data = &xpc_hb_interval,
@@ -112,11 +112,7 @@ static struct ctl_table xpc_sys_xpc_hb_dir[] = {
.extra2 = &xpc_hb_check_max_interval},
{}
};
-static struct ctl_table xpc_sys_xpc_dir[] = {
- {
- .procname = "hb",
- .mode = 0555,
- .child = xpc_sys_xpc_hb_dir},
+static struct ctl_table xpc_sys_xpc[] = {
{
.procname = "disengage_timelimit",
.data = &xpc_disengage_timelimit,
@@ -127,14 +123,9 @@ static struct ctl_table xpc_sys_xpc_dir[] = {
.extra2 = &xpc_disengage_max_timelimit},
{}
};
-static struct ctl_table xpc_sys_dir[] = {
- {
- .procname = "xpc",
- .mode = 0555,
- .child = xpc_sys_xpc_dir},
- {}
-};
+
static struct ctl_table_header *xpc_sysctl;
+static struct ctl_table_header *xpc_sysctl_hb;
/* non-zero if any remote partition disengage was timed out */
int xpc_disengage_timedout;
@@ -1041,6 +1032,8 @@ xpc_do_exit(enum xp_retval reason)
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
+ if (xpc_sysctl_hb)
+ unregister_sysctl_table(xpc_sysctl_hb);
xpc_teardown_partitions();
@@ -1243,7 +1236,8 @@ xpc_init(void)
goto out_1;
}
- xpc_sysctl = register_sysctl_table(xpc_sys_dir);
+ xpc_sysctl = register_sysctl("xpc", xpc_sys_xpc);
+ xpc_sysctl_hb = register_sysctl("xpc/hb", xpc_sys_xpc_hb);
/*
* Fill the partition reserved page with the information needed by
@@ -1308,6 +1302,8 @@ out_3:
(void)unregister_die_notifier(&xpc_die_notifier);
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
out_2:
+ if (xpc_sysctl_hb)
+ unregister_sysctl_table(xpc_sysctl_hb);
if (xpc_sysctl)
unregister_sysctl_table(xpc_sysctl);
diff --git a/drivers/misc/smpro-errmon.c b/drivers/misc/smpro-errmon.c
index d1431d419aa4..a1f0b2c77fac 100644
--- a/drivers/misc/smpro-errmon.c
+++ b/drivers/misc/smpro-errmon.c
@@ -47,6 +47,12 @@
#define WARN_PMPRO_INFO_LO 0xAC
#define WARN_PMPRO_INFO_HI 0xAD
+/* Boot Stage Register */
+#define BOOTSTAGE 0xB0
+#define DIMM_SYNDROME_SEL 0xB4
+#define DIMM_SYNDROME_ERR 0xB5
+#define DIMM_SYNDROME_STAGE 4
+
/* PCIE Error Registers */
#define PCIE_CE_ERR_CNT 0xC0
#define PCIE_CE_ERR_LEN 0xC1
@@ -67,6 +73,7 @@
#define VRD_WARN_FAULT_EVENT_DATA 0x78
#define VRD_HOT_EVENT_DATA 0x79
#define DIMM_HOT_EVENT_DATA 0x7A
+#define DIMM_2X_REFRESH_EVENT_DATA 0x96
#define MAX_READ_BLOCK_LENGTH 48
@@ -190,6 +197,7 @@ enum EVENT_TYPES {
VRD_WARN_FAULT_EVENT,
VRD_HOT_EVENT,
DIMM_HOT_EVENT,
+ DIMM_2X_REFRESH_EVENT,
NUM_EVENTS_TYPE,
};
@@ -198,6 +206,7 @@ static u8 smpro_event_table[NUM_EVENTS_TYPE] = {
VRD_WARN_FAULT_EVENT_DATA,
VRD_HOT_EVENT_DATA,
DIMM_HOT_EVENT_DATA,
+ DIMM_2X_REFRESH_EVENT_DATA,
};
static ssize_t smpro_event_data_read(struct device *dev,
@@ -463,6 +472,62 @@ static DEVICE_ATTR_RO(warn_pmpro);
EVENT_RO(vrd_warn_fault, VRD_WARN_FAULT_EVENT);
EVENT_RO(vrd_hot, VRD_HOT_EVENT);
EVENT_RO(dimm_hot, DIMM_HOT_EVENT);
+EVENT_RO(dimm_2x_refresh, DIMM_2X_REFRESH_EVENT);
+
+static ssize_t smpro_dimm_syndrome_read(struct device *dev, struct device_attribute *da,
+ char *buf, unsigned int slot)
+{
+ struct smpro_errmon *errmon = dev_get_drvdata(dev);
+ unsigned int data;
+ int ret;
+
+ ret = regmap_read(errmon->regmap, BOOTSTAGE, &data);
+ if (ret)
+ return ret;
+
+ /* check for valid stage */
+ data = (data >> 8) & 0xff;
+ if (data != DIMM_SYNDROME_STAGE)
+ return ret;
+
+ /* Write the slot ID to retrieve Error Syndrome */
+ ret = regmap_write(errmon->regmap, DIMM_SYNDROME_SEL, slot);
+ if (ret)
+ return ret;
+
+ /* Read the Syndrome error */
+ ret = regmap_read(errmon->regmap, DIMM_SYNDROME_ERR, &data);
+ if (ret || !data)
+ return ret;
+
+ return sysfs_emit(buf, "%04x\n", data);
+}
+
+#define EVENT_DIMM_SYNDROME(_slot) \
+ static ssize_t event_dimm##_slot##_syndrome_show(struct device *dev, \
+ struct device_attribute *da, \
+ char *buf) \
+ { \
+ return smpro_dimm_syndrome_read(dev, da, buf, _slot); \
+ } \
+ static DEVICE_ATTR_RO(event_dimm##_slot##_syndrome)
+
+EVENT_DIMM_SYNDROME(0);
+EVENT_DIMM_SYNDROME(1);
+EVENT_DIMM_SYNDROME(2);
+EVENT_DIMM_SYNDROME(3);
+EVENT_DIMM_SYNDROME(4);
+EVENT_DIMM_SYNDROME(5);
+EVENT_DIMM_SYNDROME(6);
+EVENT_DIMM_SYNDROME(7);
+EVENT_DIMM_SYNDROME(8);
+EVENT_DIMM_SYNDROME(9);
+EVENT_DIMM_SYNDROME(10);
+EVENT_DIMM_SYNDROME(11);
+EVENT_DIMM_SYNDROME(12);
+EVENT_DIMM_SYNDROME(13);
+EVENT_DIMM_SYNDROME(14);
+EVENT_DIMM_SYNDROME(15);
static struct attribute *smpro_errmon_attrs[] = {
&dev_attr_overflow_core_ce.attr,
@@ -488,6 +553,23 @@ static struct attribute *smpro_errmon_attrs[] = {
&dev_attr_event_vrd_warn_fault.attr,
&dev_attr_event_vrd_hot.attr,
&dev_attr_event_dimm_hot.attr,
+ &dev_attr_event_dimm_2x_refresh.attr,
+ &dev_attr_event_dimm0_syndrome.attr,
+ &dev_attr_event_dimm1_syndrome.attr,
+ &dev_attr_event_dimm2_syndrome.attr,
+ &dev_attr_event_dimm3_syndrome.attr,
+ &dev_attr_event_dimm4_syndrome.attr,
+ &dev_attr_event_dimm5_syndrome.attr,
+ &dev_attr_event_dimm6_syndrome.attr,
+ &dev_attr_event_dimm7_syndrome.attr,
+ &dev_attr_event_dimm8_syndrome.attr,
+ &dev_attr_event_dimm9_syndrome.attr,
+ &dev_attr_event_dimm10_syndrome.attr,
+ &dev_attr_event_dimm11_syndrome.attr,
+ &dev_attr_event_dimm12_syndrome.attr,
+ &dev_attr_event_dimm13_syndrome.attr,
+ &dev_attr_event_dimm14_syndrome.attr,
+ &dev_attr_event_dimm15_syndrome.attr,
NULL
};
diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c
index f0e7f02605eb..99413310956b 100644
--- a/drivers/misc/sram.c
+++ b/drivers/misc/sram.c
@@ -218,14 +218,9 @@ static int sram_reserve_regions(struct sram_dev *sram, struct resource *res)
block->res = child_res;
list_add_tail(&block->list, &reserve_list);
- if (of_find_property(child, "export", NULL))
- block->export = true;
-
- if (of_find_property(child, "pool", NULL))
- block->pool = true;
-
- if (of_find_property(child, "protect-exec", NULL))
- block->protect_exec = true;
+ block->export = of_property_read_bool(child, "export");
+ block->pool = of_property_read_bool(child, "pool");
+ block->protect_exec = of_property_read_bool(child, "protect-exec");
if ((block->export || block->pool || block->protect_exec) &&
block->size) {
@@ -381,6 +376,7 @@ static int sram_probe(struct platform_device *pdev)
struct sram_dev *sram;
int ret;
struct resource *res;
+ struct clk *clk;
config = of_device_get_match_data(&pdev->dev);
@@ -409,16 +405,14 @@ static int sram_probe(struct platform_device *pdev)
return PTR_ERR(sram->pool);
}
- sram->clk = devm_clk_get(sram->dev, NULL);
- if (IS_ERR(sram->clk))
- sram->clk = NULL;
- else
- clk_prepare_enable(sram->clk);
+ clk = devm_clk_get_optional_enabled(sram->dev, NULL);
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
ret = sram_reserve_regions(sram,
platform_get_resource(pdev, IORESOURCE_MEM, 0));
if (ret)
- goto err_disable_clk;
+ return ret;
platform_set_drvdata(pdev, sram);
@@ -436,9 +430,6 @@ static int sram_probe(struct platform_device *pdev)
err_free_partitions:
sram_free_partitions(sram);
-err_disable_clk:
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
return ret;
}
@@ -452,9 +443,6 @@ static int sram_remove(struct platform_device *pdev)
if (sram->pool && gen_pool_avail(sram->pool) < gen_pool_size(sram->pool))
dev_err(sram->dev, "removed while SRAM allocated\n");
- if (sram->clk)
- clk_disable_unprepare(sram->clk);
-
return 0;
}
diff --git a/drivers/misc/sram.h b/drivers/misc/sram.h
index d2058d8c8f1d..397205b8bf6f 100644
--- a/drivers/misc/sram.h
+++ b/drivers/misc/sram.h
@@ -27,7 +27,6 @@ struct sram_dev {
bool no_memory_wc;
struct gen_pool *pool;
- struct clk *clk;
struct sram_partition *partition;
u32 partitions;
diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c
index 857b9851402a..abe79f6fd2a7 100644
--- a/drivers/misc/vmw_vmci/vmci_host.c
+++ b/drivers/misc/vmw_vmci/vmci_host.c
@@ -165,10 +165,16 @@ static int vmci_host_close(struct inode *inode, struct file *filp)
static __poll_t vmci_host_poll(struct file *filp, poll_table *wait)
{
struct vmci_host_dev *vmci_host_dev = filp->private_data;
- struct vmci_ctx *context = vmci_host_dev->context;
+ struct vmci_ctx *context;
__poll_t mask = 0;
if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) {
+ /*
+ * Read context only if ct_type == VMCIOBJ_CONTEXT to make
+ * sure that context is initialized
+ */
+ context = vmci_host_dev->context;
+
/* Check for VMCI calls to this VM context. */
if (wait)
poll_wait(filp, &context->host_context.wait_queue,
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index 6dec38805041..b291b27048c7 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -21,6 +21,10 @@ config NVMEM_SYSFS
This interface is mostly used by userspace applications to
read/write directly into nvmem.
+# Layouts
+
+source "drivers/nvmem/layouts/Kconfig"
+
# Devices
config NVMEM_APPLE_EFUSES
@@ -336,6 +340,7 @@ config NVMEM_U_BOOT_ENV
tristate "U-Boot environment variables support"
depends on OF && MTD
select CRC32
+ select GENERIC_NET_UTILS
help
U-Boot stores its setup as environment variables. This driver adds
support for verifying & exporting such data. It also exposes variables
@@ -368,7 +373,7 @@ config NVMEM_VF610_OCOTP
be called nvmem-vf610-ocotp.
config NVMEM_ZYNQMP
- bool "Xilinx ZYNQMP SoC nvmem firmware support"
+ tristate "Xilinx ZYNQMP SoC nvmem firmware support"
depends on ARCH_ZYNQMP
help
This is a driver to access hardware related data like
diff --git a/drivers/nvmem/Makefile b/drivers/nvmem/Makefile
index 6a1efffa88f0..f82431ec8aef 100644
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@@ -5,6 +5,7 @@
obj-$(CONFIG_NVMEM) += nvmem_core.o
nvmem_core-y := core.o
+obj-y += layouts/
# Devices
obj-$(CONFIG_NVMEM_APPLE_EFUSES) += nvmem-apple-efuses.o
diff --git a/drivers/nvmem/bcm-ocotp.c b/drivers/nvmem/bcm-ocotp.c
index a128c7f5e351..0c1fa0c4feb2 100644
--- a/drivers/nvmem/bcm-ocotp.c
+++ b/drivers/nvmem/bcm-ocotp.c
@@ -244,7 +244,6 @@ MODULE_DEVICE_TABLE(acpi, bcm_otpc_acpi_ids);
static int bcm_otpc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
- struct resource *res;
struct otpc_priv *priv;
struct nvmem_device *nvmem;
int err;
@@ -259,8 +258,7 @@ static int bcm_otpc_probe(struct platform_device *pdev)
return -ENODEV;
/* Get OTP base address register. */
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(dev, res);
+ priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base)) {
dev_err(dev, "unable to map I/O memory\n");
return PTR_ERR(priv->base);
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 22024b830788..a62973d010ff 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -17,6 +17,7 @@
#include <linux/nvmem-provider.h>
#include <linux/gpio/consumer.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/slab.h>
struct nvmem_device {
@@ -38,8 +39,8 @@ struct nvmem_device {
unsigned int nkeepout;
nvmem_reg_read_t reg_read;
nvmem_reg_write_t reg_write;
- nvmem_cell_post_process_t cell_post_process;
struct gpio_desc *wp_gpio;
+ struct nvmem_layout *layout;
void *priv;
};
@@ -49,9 +50,12 @@ struct nvmem_device {
struct nvmem_cell_entry {
const char *name;
int offset;
+ size_t raw_len;
int bytes;
int bit_offset;
int nbits;
+ nvmem_cell_post_process_t read_post_process;
+ void *priv;
struct device_node *np;
struct nvmem_device *nvmem;
struct list_head node;
@@ -74,6 +78,9 @@ static LIST_HEAD(nvmem_lookup_list);
static BLOCKING_NOTIFIER_HEAD(nvmem_notifier);
+static DEFINE_SPINLOCK(nvmem_layout_lock);
+static LIST_HEAD(nvmem_layouts);
+
static int __nvmem_reg_read(struct nvmem_device *nvmem, unsigned int offset,
void *val, size_t bytes)
{
@@ -463,8 +470,11 @@ static int nvmem_cell_info_to_nvmem_cell_entry_nodup(struct nvmem_device *nvmem,
{
cell->nvmem = nvmem;
cell->offset = info->offset;
+ cell->raw_len = info->raw_len ?: info->bytes;
cell->bytes = info->bytes;
cell->name = info->name;
+ cell->read_post_process = info->read_post_process;
+ cell->priv = info->priv;
cell->bit_offset = info->bit_offset;
cell->nbits = info->nbits;
@@ -688,6 +698,7 @@ static int nvmem_validate_keepouts(struct nvmem_device *nvmem)
static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
{
+ struct nvmem_layout *layout = nvmem->layout;
struct device *dev = &nvmem->dev;
struct device_node *child;
const __be32 *addr;
@@ -717,6 +728,9 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
info.np = of_node_get(child);
+ if (layout && layout->fixup_cell_info)
+ layout->fixup_cell_info(nvmem, layout, &info);
+
ret = nvmem_add_one_cell(nvmem, &info);
kfree(info.name);
if (ret) {
@@ -728,6 +742,108 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
return 0;
}
+int __nvmem_layout_register(struct nvmem_layout *layout, struct module *owner)
+{
+ layout->owner = owner;
+
+ spin_lock(&nvmem_layout_lock);
+ list_add(&layout->node, &nvmem_layouts);
+ spin_unlock(&nvmem_layout_lock);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(__nvmem_layout_register);
+
+void nvmem_layout_unregister(struct nvmem_layout *layout)
+{
+ spin_lock(&nvmem_layout_lock);
+ list_del(&layout->node);
+ spin_unlock(&nvmem_layout_lock);
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_unregister);
+
+static struct nvmem_layout *nvmem_layout_get(struct nvmem_device *nvmem)
+{
+ struct device_node *layout_np, *np = nvmem->dev.of_node;
+ struct nvmem_layout *l, *layout = ERR_PTR(-EPROBE_DEFER);
+
+ layout_np = of_get_child_by_name(np, "nvmem-layout");
+ if (!layout_np)
+ return NULL;
+
+ /*
+ * In case the nvmem device was built-in while the layout was built as a
+ * module, we shall manually request the layout driver loading otherwise
+ * we'll never have any match.
+ */
+ of_request_module(layout_np);
+
+ spin_lock(&nvmem_layout_lock);
+
+ list_for_each_entry(l, &nvmem_layouts, node) {
+ if (of_match_node(l->of_match_table, layout_np)) {
+ if (try_module_get(l->owner))
+ layout = l;
+
+ break;
+ }
+ }
+
+ spin_unlock(&nvmem_layout_lock);
+ of_node_put(layout_np);
+
+ return layout;
+}
+
+static void nvmem_layout_put(struct nvmem_layout *layout)
+{
+ if (layout)
+ module_put(layout->owner);
+}
+
+static int nvmem_add_cells_from_layout(struct nvmem_device *nvmem)
+{
+ struct nvmem_layout *layout = nvmem->layout;
+ int ret;
+
+ if (layout && layout->add_cells) {
+ ret = layout->add_cells(&nvmem->dev, nvmem, layout);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+#if IS_ENABLED(CONFIG_OF)
+/**
+ * of_nvmem_layout_get_container() - Get OF node to layout container.
+ *
+ * @nvmem: nvmem device.
+ *
+ * Return: a node pointer with refcount incremented or NULL if no
+ * container exists. Use of_node_put() on it when done.
+ */
+struct device_node *of_nvmem_layout_get_container(struct nvmem_device *nvmem)
+{
+ return of_get_child_by_name(nvmem->dev.of_node, "nvmem-layout");
+}
+EXPORT_SYMBOL_GPL(of_nvmem_layout_get_container);
+#endif
+
+const void *nvmem_layout_get_match_data(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ struct device_node __maybe_unused *layout_np;
+ const struct of_device_id *match;
+
+ layout_np = of_nvmem_layout_get_container(nvmem);
+ match = of_match_node(layout->of_match_table, layout_np);
+
+ return match ? match->data : NULL;
+}
+EXPORT_SYMBOL_GPL(nvmem_layout_get_match_data);
+
/**
* nvmem_register() - Register a nvmem device for given nvmem_config.
* Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
@@ -790,7 +906,6 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
nvmem->type = config->type;
nvmem->reg_read = config->reg_read;
nvmem->reg_write = config->reg_write;
- nvmem->cell_post_process = config->cell_post_process;
nvmem->keepout = config->keepout;
nvmem->nkeepout = config->nkeepout;
if (config->of_node)
@@ -834,6 +949,19 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
goto err_put_device;
}
+ /*
+ * If the driver supplied a layout by config->layout, the module
+ * pointer will be NULL and nvmem_layout_put() will be a noop.
+ */
+ nvmem->layout = config->layout ?: nvmem_layout_get(nvmem);
+ if (IS_ERR(nvmem->layout)) {
+ rval = PTR_ERR(nvmem->layout);
+ nvmem->layout = NULL;
+
+ if (rval == -EPROBE_DEFER)
+ goto err_teardown_compat;
+ }
+
if (config->cells) {
rval = nvmem_add_cells(nvmem, config->cells, config->ncells);
if (rval)
@@ -854,12 +982,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (rval)
goto err_remove_cells;
+ rval = nvmem_add_cells_from_layout(nvmem);
+ if (rval)
+ goto err_remove_cells;
+
blocking_notifier_call_chain(&nvmem_notifier, NVMEM_ADD, nvmem);
return nvmem;
err_remove_cells:
nvmem_device_remove_all_cells(nvmem);
+ nvmem_layout_put(nvmem->layout);
+err_teardown_compat:
if (config->compat)
nvmem_sysfs_remove_compat(nvmem, config);
err_put_device:
@@ -881,6 +1015,7 @@ static void nvmem_device_release(struct kref *kref)
device_remove_bin_file(nvmem->base_dev, &nvmem->eeprom);
nvmem_device_remove_all_cells(nvmem);
+ nvmem_layout_put(nvmem->layout);
device_unregister(&nvmem->dev);
}
@@ -1246,6 +1381,15 @@ struct nvmem_cell *of_nvmem_cell_get(struct device_node *np, const char *id)
return ERR_PTR(-EINVAL);
}
+ /* nvmem layouts produce cells within the nvmem-layout container */
+ if (of_node_name_eq(nvmem_np, "nvmem-layout")) {
+ nvmem_np = of_get_next_parent(nvmem_np);
+ if (!nvmem_np) {
+ of_node_put(cell_np);
+ return ERR_PTR(-EINVAL);
+ }
+ }
+
nvmem = __nvmem_device_get(nvmem_np, device_match_of_node);
of_node_put(nvmem_np);
if (IS_ERR(nvmem)) {
@@ -1418,7 +1562,7 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
{
int rc;
- rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->bytes);
+ rc = nvmem_reg_read(nvmem, cell->offset, buf, cell->raw_len);
if (rc)
return rc;
@@ -1427,9 +1571,9 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
if (cell->bit_offset || cell->nbits)
nvmem_shift_read_buffer_in_place(cell, buf);
- if (nvmem->cell_post_process) {
- rc = nvmem->cell_post_process(nvmem->priv, id, index,
- cell->offset, buf, cell->bytes);
+ if (cell->read_post_process) {
+ rc = cell->read_post_process(cell->priv, id, index,
+ cell->offset, buf, cell->raw_len);
if (rc)
return rc;
}
@@ -1452,14 +1596,15 @@ static int __nvmem_cell_read(struct nvmem_device *nvmem,
*/
void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
{
- struct nvmem_device *nvmem = cell->entry->nvmem;
+ struct nvmem_cell_entry *entry = cell->entry;
+ struct nvmem_device *nvmem = entry->nvmem;
u8 *buf;
int rc;
if (!nvmem)
return ERR_PTR(-EINVAL);
- buf = kzalloc(cell->entry->bytes, GFP_KERNEL);
+ buf = kzalloc(max_t(size_t, entry->raw_len, entry->bytes), GFP_KERNEL);
if (!buf)
return ERR_PTR(-ENOMEM);
@@ -1535,6 +1680,14 @@ static int __nvmem_cell_entry_write(struct nvmem_cell_entry *cell, void *buf, si
(cell->bit_offset == 0 && len != cell->bytes))
return -EINVAL;
+ /*
+ * Any cells which have a read_post_process hook are read-only because
+ * we cannot reverse the operation and it might affect other cells,
+ * too.
+ */
+ if (cell->read_post_process)
+ return -EINVAL;
+
if (cell->bit_offset || cell->nbits) {
buf = nvmem_cell_prepare_write_buffer(cell, buf, len);
if (IS_ERR(buf))
diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index e9b52ecb3f72..ac0edb6398f1 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -225,18 +225,13 @@ read_end:
static int imx_ocotp_cell_pp(void *context, const char *id, int index,
unsigned int offset, void *data, size_t bytes)
{
- struct ocotp_priv *priv = context;
+ u8 *buf = data;
+ int i;
/* Deal with some post processing of nvmem cell data */
- if (id && !strcmp(id, "mac-address")) {
- if (priv->params->reverse_mac_address) {
- u8 *buf = data;
- int i;
-
- for (i = 0; i < bytes/2; i++)
- swap(buf[i], buf[bytes - i - 1]);
- }
- }
+ if (id && !strcmp(id, "mac-address"))
+ for (i = 0; i < bytes / 2; i++)
+ swap(buf[i], buf[bytes - i - 1]);
return 0;
}
@@ -488,7 +483,6 @@ static struct nvmem_config imx_ocotp_nvmem_config = {
.stride = 1,
.reg_read = imx_ocotp_read,
.reg_write = imx_ocotp_write,
- .cell_post_process = imx_ocotp_cell_pp,
};
static const struct ocotp_params imx6q_params = {
@@ -595,6 +589,17 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
+static void imx_ocotp_fixup_cell_info(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout,
+ struct nvmem_cell_info *cell)
+{
+ cell->read_post_process = imx_ocotp_cell_pp;
+}
+
+struct nvmem_layout imx_ocotp_layout = {
+ .fixup_cell_info = imx_ocotp_fixup_cell_info,
+};
+
static int imx_ocotp_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -619,6 +624,9 @@ static int imx_ocotp_probe(struct platform_device *pdev)
imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
imx_ocotp_nvmem_config.dev = dev;
imx_ocotp_nvmem_config.priv = priv;
+ if (priv->params->reverse_mac_address)
+ imx_ocotp_nvmem_config.layout = &imx_ocotp_layout;
+
priv->config = &imx_ocotp_nvmem_config;
clk_prepare_enable(priv->clk);
diff --git a/drivers/nvmem/layouts/Kconfig b/drivers/nvmem/layouts/Kconfig
new file mode 100644
index 000000000000..7ff1ee1c1f05
--- /dev/null
+++ b/drivers/nvmem/layouts/Kconfig
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+
+menu "Layout Types"
+
+config NVMEM_LAYOUT_SL28_VPD
+ tristate "Kontron sl28 VPD layout support"
+ select CRC8
+ help
+ Say Y here if you want to support the VPD layout of the Kontron
+ SMARC-sAL28 boards.
+
+ If unsure, say N.
+
+config NVMEM_LAYOUT_ONIE_TLV
+ tristate "ONIE tlv support"
+ select CRC32
+ help
+ Say Y here if you want to support the Open Compute Project ONIE
+ Type-Length-Value standard table.
+
+ If unsure, say N.
+
+endmenu
diff --git a/drivers/nvmem/layouts/Makefile b/drivers/nvmem/layouts/Makefile
new file mode 100644
index 000000000000..2974bd7d33ed
--- /dev/null
+++ b/drivers/nvmem/layouts/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for nvmem layouts.
+#
+
+obj-$(CONFIG_NVMEM_LAYOUT_SL28_VPD) += sl28vpd.o
+obj-$(CONFIG_NVMEM_LAYOUT_ONIE_TLV) += onie-tlv.o
diff --git a/drivers/nvmem/layouts/onie-tlv.c b/drivers/nvmem/layouts/onie-tlv.c
new file mode 100644
index 000000000000..59fc87ccfcff
--- /dev/null
+++ b/drivers/nvmem/layouts/onie-tlv.c
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ONIE tlv NVMEM cells provider
+ *
+ * Copyright (C) 2022 Open Compute Group ONIE
+ * Author: Miquel Raynal <miquel.raynal@bootlin.com>
+ * Based on the nvmem driver written by: Vadym Kochan <vadym.kochan@plvision.eu>
+ * Inspired by the first layout written by: Rafał Miłecki <rafal@milecki.pl>
+ */
+
+#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+
+#define ONIE_TLV_MAX_LEN 2048
+#define ONIE_TLV_CRC_FIELD_SZ 6
+#define ONIE_TLV_CRC_SZ 4
+#define ONIE_TLV_HDR_ID "TlvInfo"
+
+struct onie_tlv_hdr {
+ u8 id[8];
+ u8 version;
+ __be16 data_len;
+} __packed;
+
+struct onie_tlv {
+ u8 type;
+ u8 len;
+} __packed;
+
+static const char *onie_tlv_cell_name(u8 type)
+{
+ switch (type) {
+ case 0x21:
+ return "product-name";
+ case 0x22:
+ return "part-number";
+ case 0x23:
+ return "serial-number";
+ case 0x24:
+ return "mac-address";
+ case 0x25:
+ return "manufacture-date";
+ case 0x26:
+ return "device-version";
+ case 0x27:
+ return "label-revision";
+ case 0x28:
+ return "platform-name";
+ case 0x29:
+ return "onie-version";
+ case 0x2A:
+ return "num-macs";
+ case 0x2B:
+ return "manufacturer";
+ case 0x2C:
+ return "country-code";
+ case 0x2D:
+ return "vendor";
+ case 0x2E:
+ return "diag-version";
+ case 0x2F:
+ return "service-tag";
+ case 0xFD:
+ return "vendor-extension";
+ case 0xFE:
+ return "crc32";
+ default:
+ break;
+ }
+
+ return NULL;
+}
+
+static int onie_tlv_mac_read_cb(void *priv, const char *id, int index,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ eth_addr_add(buf, index);
+
+ return 0;
+}
+
+static nvmem_cell_post_process_t onie_tlv_read_cb(u8 type, u8 *buf)
+{
+ switch (type) {
+ case 0x24:
+ return &onie_tlv_mac_read_cb;
+ default:
+ break;
+ }
+
+ return NULL;
+}
+
+static int onie_tlv_add_cells(struct device *dev, struct nvmem_device *nvmem,
+ size_t data_len, u8 *data)
+{
+ struct nvmem_cell_info cell = {};
+ struct device_node *layout;
+ struct onie_tlv tlv;
+ unsigned int hdr_len = sizeof(struct onie_tlv_hdr);
+ unsigned int offset = 0;
+ int ret;
+
+ layout = of_nvmem_layout_get_container(nvmem);
+ if (!layout)
+ return -ENOENT;
+
+ while (offset < data_len) {
+ memcpy(&tlv, data + offset, sizeof(tlv));
+ if (offset + tlv.len >= data_len) {
+ dev_err(dev, "Out of bounds field (0x%x bytes at 0x%x)\n",
+ tlv.len, hdr_len + offset);
+ break;
+ }
+
+ cell.name = onie_tlv_cell_name(tlv.type);
+ if (!cell.name)
+ continue;
+
+ cell.offset = hdr_len + offset + sizeof(tlv.type) + sizeof(tlv.len);
+ cell.bytes = tlv.len;
+ cell.np = of_get_child_by_name(layout, cell.name);
+ cell.read_post_process = onie_tlv_read_cb(tlv.type, data + offset + sizeof(tlv));
+
+ ret = nvmem_add_one_cell(nvmem, &cell);
+ if (ret) {
+ of_node_put(layout);
+ return ret;
+ }
+
+ offset += sizeof(tlv) + tlv.len;
+ }
+
+ of_node_put(layout);
+
+ return 0;
+}
+
+static bool onie_tlv_hdr_is_valid(struct device *dev, struct onie_tlv_hdr *hdr)
+{
+ if (memcmp(hdr->id, ONIE_TLV_HDR_ID, sizeof(hdr->id))) {
+ dev_err(dev, "Invalid header\n");
+ return false;
+ }
+
+ if (hdr->version != 0x1) {
+ dev_err(dev, "Invalid version number\n");
+ return false;
+ }
+
+ return true;
+}
+
+static bool onie_tlv_crc_is_valid(struct device *dev, size_t table_len, u8 *table)
+{
+ struct onie_tlv crc_hdr;
+ u32 read_crc, calc_crc;
+ __be32 crc_be;
+
+ memcpy(&crc_hdr, table + table_len - ONIE_TLV_CRC_FIELD_SZ, sizeof(crc_hdr));
+ if (crc_hdr.type != 0xfe || crc_hdr.len != ONIE_TLV_CRC_SZ) {
+ dev_err(dev, "Invalid CRC field\n");
+ return false;
+ }
+
+ /* The table contains a JAMCRC, which is XOR'ed compared to the original
+ * CRC32 implementation as known in the Ethernet world.
+ */
+ memcpy(&crc_be, table + table_len - ONIE_TLV_CRC_SZ, ONIE_TLV_CRC_SZ);
+ read_crc = be32_to_cpu(crc_be);
+ calc_crc = crc32(~0, table, table_len - ONIE_TLV_CRC_SZ) ^ 0xFFFFFFFF;
+ if (read_crc != calc_crc) {
+ dev_err(dev, "Invalid CRC read: 0x%08x, expected: 0x%08x\n",
+ read_crc, calc_crc);
+ return false;
+ }
+
+ return true;
+}
+
+static int onie_tlv_parse_table(struct device *dev, struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ struct onie_tlv_hdr hdr;
+ size_t table_len, data_len, hdr_len;
+ u8 *table, *data;
+ int ret;
+
+ ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
+ if (ret < 0)
+ return ret;
+
+ if (!onie_tlv_hdr_is_valid(dev, &hdr)) {
+ dev_err(dev, "Invalid ONIE TLV header\n");
+ return -EINVAL;
+ }
+
+ hdr_len = sizeof(hdr.id) + sizeof(hdr.version) + sizeof(hdr.data_len);
+ data_len = be16_to_cpu(hdr.data_len);
+ table_len = hdr_len + data_len;
+ if (table_len > ONIE_TLV_MAX_LEN) {
+ dev_err(dev, "Invalid ONIE TLV data length\n");
+ return -EINVAL;
+ }
+
+ table = devm_kmalloc(dev, table_len, GFP_KERNEL);
+ if (!table)
+ return -ENOMEM;
+
+ ret = nvmem_device_read(nvmem, 0, table_len, table);
+ if (ret != table_len)
+ return ret;
+
+ if (!onie_tlv_crc_is_valid(dev, table_len, table))
+ return -EINVAL;
+
+ data = table + hdr_len;
+ ret = onie_tlv_add_cells(dev, nvmem, data_len, data);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct of_device_id onie_tlv_of_match_table[] = {
+ { .compatible = "onie,tlv-layout", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, onie_tlv_of_match_table);
+
+static struct nvmem_layout onie_tlv_layout = {
+ .name = "ONIE tlv layout",
+ .of_match_table = onie_tlv_of_match_table,
+ .add_cells = onie_tlv_parse_table,
+};
+module_nvmem_layout_driver(onie_tlv_layout);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("NVMEM layout driver for Onie TLV table parsing");
diff --git a/drivers/nvmem/layouts/sl28vpd.c b/drivers/nvmem/layouts/sl28vpd.c
new file mode 100644
index 000000000000..05671371f631
--- /dev/null
+++ b/drivers/nvmem/layouts/sl28vpd.c
@@ -0,0 +1,153 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/crc8.h>
+#include <linux/etherdevice.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <uapi/linux/if_ether.h>
+
+#define SL28VPD_MAGIC 'V'
+
+struct sl28vpd_header {
+ u8 magic;
+ u8 version;
+} __packed;
+
+struct sl28vpd_v1 {
+ struct sl28vpd_header header;
+ char serial_number[15];
+ u8 base_mac_address[ETH_ALEN];
+ u8 crc8;
+} __packed;
+
+static int sl28vpd_mac_address_pp(void *priv, const char *id, int index,
+ unsigned int offset, void *buf,
+ size_t bytes)
+{
+ if (bytes != ETH_ALEN)
+ return -EINVAL;
+
+ if (index < 0)
+ return -EINVAL;
+
+ if (!is_valid_ether_addr(buf))
+ return -EINVAL;
+
+ eth_addr_add(buf, index);
+
+ return 0;
+}
+
+static const struct nvmem_cell_info sl28vpd_v1_entries[] = {
+ {
+ .name = "serial-number",
+ .offset = offsetof(struct sl28vpd_v1, serial_number),
+ .bytes = sizeof_field(struct sl28vpd_v1, serial_number),
+ },
+ {
+ .name = "base-mac-address",
+ .offset = offsetof(struct sl28vpd_v1, base_mac_address),
+ .bytes = sizeof_field(struct sl28vpd_v1, base_mac_address),
+ .read_post_process = sl28vpd_mac_address_pp,
+ },
+};
+
+static int sl28vpd_v1_check_crc(struct device *dev, struct nvmem_device *nvmem)
+{
+ struct sl28vpd_v1 data_v1;
+ u8 table[CRC8_TABLE_SIZE];
+ int ret;
+ u8 crc;
+
+ crc8_populate_msb(table, 0x07);
+
+ ret = nvmem_device_read(nvmem, 0, sizeof(data_v1), &data_v1);
+ if (ret < 0)
+ return ret;
+ else if (ret != sizeof(data_v1))
+ return -EIO;
+
+ crc = crc8(table, (void *)&data_v1, sizeof(data_v1) - 1, 0);
+
+ if (crc != data_v1.crc8) {
+ dev_err(dev,
+ "Checksum is invalid (got %02x, expected %02x).\n",
+ crc, data_v1.crc8);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sl28vpd_add_cells(struct device *dev, struct nvmem_device *nvmem,
+ struct nvmem_layout *layout)
+{
+ const struct nvmem_cell_info *pinfo;
+ struct nvmem_cell_info info = {0};
+ struct device_node *layout_np;
+ struct sl28vpd_header hdr;
+ int ret, i;
+
+ /* check header */
+ ret = nvmem_device_read(nvmem, 0, sizeof(hdr), &hdr);
+ if (ret < 0)
+ return ret;
+ else if (ret != sizeof(hdr))
+ return -EIO;
+
+ if (hdr.magic != SL28VPD_MAGIC) {
+ dev_err(dev, "Invalid magic value (%02x)\n", hdr.magic);
+ return -EINVAL;
+ }
+
+ if (hdr.version != 1) {
+ dev_err(dev, "Version %d is unsupported.\n", hdr.version);
+ return -EINVAL;
+ }
+
+ ret = sl28vpd_v1_check_crc(dev, nvmem);
+ if (ret)
+ return ret;
+
+ layout_np = of_nvmem_layout_get_container(nvmem);
+ if (!layout_np)
+ return -ENOENT;
+
+ for (i = 0; i < ARRAY_SIZE(sl28vpd_v1_entries); i++) {
+ pinfo = &sl28vpd_v1_entries[i];
+
+ info.name = pinfo->name;
+ info.offset = pinfo->offset;
+ info.bytes = pinfo->bytes;
+ info.read_post_process = pinfo->read_post_process;
+ info.np = of_get_child_by_name(layout_np, pinfo->name);
+
+ ret = nvmem_add_one_cell(nvmem, &info);
+ if (ret) {
+ of_node_put(layout_np);
+ return ret;
+ }
+ }
+
+ of_node_put(layout_np);
+
+ return 0;
+}
+
+static const struct of_device_id sl28vpd_of_match_table[] = {
+ { .compatible = "kontron,sl28-vpd" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, sl28vpd_of_match_table);
+
+static struct nvmem_layout sl28vpd_layout = {
+ .name = "sl28-vpd",
+ .of_match_table = sl28vpd_of_match_table,
+ .add_cells = sl28vpd_add_cells,
+};
+module_nvmem_layout_driver(sl28vpd_layout);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Michael Walle <michael@walle.cc>");
+MODULE_DESCRIPTION("NVMEM layout driver for the VPD of Kontron sl28 boards");
diff --git a/drivers/nvmem/mtk-efuse.c b/drivers/nvmem/mtk-efuse.c
index a08e0aedd21c..b36cd0dcc8c7 100644
--- a/drivers/nvmem/mtk-efuse.c
+++ b/drivers/nvmem/mtk-efuse.c
@@ -10,6 +10,11 @@
#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+#include <linux/property.h>
+
+struct mtk_efuse_pdata {
+ bool uses_post_processing;
+};
struct mtk_efuse_priv {
void __iomem *base;
@@ -29,6 +34,37 @@ static int mtk_reg_read(void *context,
return 0;
}
+static int mtk_efuse_gpu_speedbin_pp(void *context, const char *id, int index,
+ unsigned int offset, void *data, size_t bytes)
+{
+ u8 *val = data;
+
+ if (val[0] < 8)
+ val[0] = BIT(val[0]);
+
+ return 0;
+}
+
+static void mtk_efuse_fixup_cell_info(struct nvmem_device *nvmem,
+ struct nvmem_layout *layout,
+ struct nvmem_cell_info *cell)
+{
+ size_t sz = strlen(cell->name);
+
+ /*
+ * On some SoCs, the GPU speedbin is not read as bitmask but as
+ * a number with range [0-7] (max 3 bits): post process to use
+ * it in OPP tables to describe supported-hw.
+ */
+ if (cell->nbits <= 3 &&
+ strncmp(cell->name, "gpu-speedbin", min(sz, strlen("gpu-speedbin"))) == 0)
+ cell->read_post_process = mtk_efuse_gpu_speedbin_pp;
+}
+
+static struct nvmem_layout mtk_efuse_layout = {
+ .fixup_cell_info = mtk_efuse_fixup_cell_info,
+};
+
static int mtk_efuse_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -36,6 +72,7 @@ static int mtk_efuse_probe(struct platform_device *pdev)
struct nvmem_device *nvmem;
struct nvmem_config econfig = {};
struct mtk_efuse_priv *priv;
+ const struct mtk_efuse_pdata *pdata;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -45,20 +82,32 @@ static int mtk_efuse_probe(struct platform_device *pdev)
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
+ pdata = device_get_match_data(dev);
econfig.stride = 1;
econfig.word_size = 1;
econfig.reg_read = mtk_reg_read;
econfig.size = resource_size(res);
econfig.priv = priv;
econfig.dev = dev;
+ if (pdata->uses_post_processing)
+ econfig.layout = &mtk_efuse_layout;
nvmem = devm_nvmem_register(dev, &econfig);
return PTR_ERR_OR_ZERO(nvmem);
}
+static const struct mtk_efuse_pdata mtk_mt8186_efuse_pdata = {
+ .uses_post_processing = true,
+};
+
+static const struct mtk_efuse_pdata mtk_efuse_pdata = {
+ .uses_post_processing = false,
+};
+
static const struct of_device_id mtk_efuse_of_match[] = {
- { .compatible = "mediatek,mt8173-efuse",},
- { .compatible = "mediatek,efuse",},
+ { .compatible = "mediatek,mt8173-efuse", .data = &mtk_efuse_pdata },
+ { .compatible = "mediatek,mt8186-efuse", .data = &mtk_mt8186_efuse_pdata },
+ { .compatible = "mediatek,efuse", .data = &mtk_efuse_pdata },
{/* sentinel */},
};
MODULE_DEVICE_TABLE(of, mtk_efuse_of_match);
diff --git a/drivers/nvmem/nintendo-otp.c b/drivers/nvmem/nintendo-otp.c
index 33961b17f9f1..355e7f1fc6d5 100644
--- a/drivers/nvmem/nintendo-otp.c
+++ b/drivers/nvmem/nintendo-otp.c
@@ -76,7 +76,6 @@ static int nintendo_otp_probe(struct platform_device *pdev)
struct device *dev = &pdev->dev;
const struct of_device_id *of_id =
of_match_device(nintendo_otp_of_table, dev);
- struct resource *res;
struct nvmem_device *nvmem;
struct nintendo_otp_priv *priv;
@@ -92,8 +91,7 @@ static int nintendo_otp_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->regs = devm_ioremap_resource(dev, res);
+ priv->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->regs))
return PTR_ERR(priv->regs);
diff --git a/drivers/nvmem/stm32-romem.c b/drivers/nvmem/stm32-romem.c
index ba779e26937a..38d0bf557129 100644
--- a/drivers/nvmem/stm32-romem.c
+++ b/drivers/nvmem/stm32-romem.c
@@ -268,7 +268,7 @@ static const struct stm32_romem_cfg stm32mp13_bsec_cfg = {
.ta = true,
};
-static const struct of_device_id stm32_romem_of_match[] = {
+static const struct of_device_id stm32_romem_of_match[] __maybe_unused = {
{ .compatible = "st,stm32f4-otp", }, {
.compatible = "st,stm32mp15-bsec",
.data = (void *)&stm32mp15_bsec_cfg,
diff --git a/drivers/nvmem/u-boot-env.c b/drivers/nvmem/u-boot-env.c
index 29b1d87a3c51..ee9fd9989b6e 100644
--- a/drivers/nvmem/u-boot-env.c
+++ b/drivers/nvmem/u-boot-env.c
@@ -4,6 +4,8 @@
*/
#include <linux/crc32.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
@@ -70,6 +72,25 @@ static int u_boot_env_read(void *context, unsigned int offset, void *val,
return 0;
}
+static int u_boot_env_read_post_process_ethaddr(void *context, const char *id, int index,
+ unsigned int offset, void *buf, size_t bytes)
+{
+ u8 mac[ETH_ALEN];
+
+ if (bytes != 3 * ETH_ALEN - 1)
+ return -EINVAL;
+
+ if (!mac_pton(buf, mac))
+ return -EINVAL;
+
+ if (index)
+ eth_addr_add(mac, index);
+
+ ether_addr_copy(buf, mac);
+
+ return 0;
+}
+
static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
size_t data_offset, size_t data_len)
{
@@ -101,6 +122,11 @@ static int u_boot_env_add_cells(struct u_boot_env *priv, uint8_t *buf,
priv->cells[idx].offset = data_offset + value - data;
priv->cells[idx].bytes = strlen(value);
priv->cells[idx].np = of_get_child_by_name(dev->of_node, priv->cells[idx].name);
+ if (!strcmp(var, "ethaddr")) {
+ priv->cells[idx].raw_len = strlen(value);
+ priv->cells[idx].bytes = ETH_ALEN;
+ priv->cells[idx].read_post_process = u_boot_env_read_post_process_ethaddr;
+ }
}
if (WARN_ON(idx != priv->ncells))
diff --git a/drivers/nvmem/vf610-ocotp.c b/drivers/nvmem/vf610-ocotp.c
index 5b6cad16892f..ee9c61ae727d 100644
--- a/drivers/nvmem/vf610-ocotp.c
+++ b/drivers/nvmem/vf610-ocotp.c
@@ -219,8 +219,7 @@ static int vf610_ocotp_probe(struct platform_device *pdev)
if (!ocotp_dev)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- ocotp_dev->base = devm_ioremap_resource(dev, res);
+ ocotp_dev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
if (IS_ERR(ocotp_dev->base))
return PTR_ERR(ocotp_dev->base);
diff --git a/drivers/of/Makefile b/drivers/of/Makefile
index 10f704592561..eff624854575 100644
--- a/drivers/of/Makefile
+++ b/drivers/of/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-y = base.o cpu.o device.o platform.o property.o
+obj-y = base.o cpu.o device.o module.o platform.o property.o
obj-$(CONFIG_OF_KOBJ) += kobj.o
obj-$(CONFIG_OF_DYNAMIC) += dynamic.o
obj-$(CONFIG_OF_FLATTREE) += fdt.o
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 7f1720af813c..166fb7d75337 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1021,19 +1021,23 @@ struct device_node *of_find_matching_node_and_match(struct device_node *from,
EXPORT_SYMBOL(of_find_matching_node_and_match);
/**
- * of_modalias_node - Lookup appropriate modalias for a device node
+ * of_alias_from_compatible - Lookup appropriate alias for a device node
+ * depending on compatible
* @node: pointer to a device tree node
- * @modalias: Pointer to buffer that modalias value will be copied into
- * @len: Length of modalias value
+ * @alias: Pointer to buffer that alias value will be copied into
+ * @len: Length of alias value
*
* Based on the value of the compatible property, this routine will attempt
- * to choose an appropriate modalias value for a particular device tree node.
+ * to choose an appropriate alias value for a particular device tree node.
* It does this by stripping the manufacturer prefix (as delimited by a ',')
* from the first entry in the compatible list property.
*
+ * Note: The matching on just the "product" side of the compatible is a relic
+ * from I2C and SPI. Please do not add any new user.
+ *
* Return: This routine returns 0 on success, <0 on failure.
*/
-int of_modalias_node(struct device_node *node, char *modalias, int len)
+int of_alias_from_compatible(const struct device_node *node, char *alias, int len)
{
const char *compatible, *p;
int cplen;
@@ -1042,10 +1046,10 @@ int of_modalias_node(struct device_node *node, char *modalias, int len)
if (!compatible || strlen(compatible) > cplen)
return -ENODEV;
p = strchr(compatible, ',');
- strscpy(modalias, p ? p + 1 : compatible, len);
+ strscpy(alias, p ? p + 1 : compatible, len);
return 0;
}
-EXPORT_SYMBOL_GPL(of_modalias_node);
+EXPORT_SYMBOL_GPL(of_alias_from_compatible);
/**
* of_find_node_by_phandle - Find a node given a phandle
diff --git a/drivers/of/device.c b/drivers/of/device.c
index 955bfb3d1a83..0f00f1b80708 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -1,5 +1,4 @@
// SPDX-License-Identifier: GPL-2.0
-#include <linux/string.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/of_device.h>
@@ -9,7 +8,6 @@
#include <linux/dma-direct.h> /* for bus_dma_region */
#include <linux/dma-map-ops.h>
#include <linux/init.h>
-#include <linux/module.h>
#include <linux/mod_devicetable.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
@@ -248,68 +246,6 @@ const void *of_device_get_match_data(const struct device *dev)
}
EXPORT_SYMBOL(of_device_get_match_data);
-static ssize_t of_device_get_modalias(const struct device *dev, char *str, ssize_t len)
-{
- const char *compat;
- char *c;
- struct property *p;
- ssize_t csize;
- ssize_t tsize;
-
- if ((!dev) || (!dev->of_node) || dev->of_node_reused)
- return -ENODEV;
-
- /* Name & Type */
- /* %p eats all alphanum characters, so %c must be used here */
- csize = snprintf(str, len, "of:N%pOFn%c%s", dev->of_node, 'T',
- of_node_get_device_type(dev->of_node));
- tsize = csize;
- len -= csize;
- if (str)
- str += csize;
-
- of_property_for_each_string(dev->of_node, "compatible", p, compat) {
- csize = strlen(compat) + 1;
- tsize += csize;
- if (csize > len)
- continue;
-
- csize = snprintf(str, len, "C%s", compat);
- for (c = str; c; ) {
- c = strchr(c, ' ');
- if (c)
- *c++ = '_';
- }
- len -= csize;
- str += csize;
- }
-
- return tsize;
-}
-
-int of_device_request_module(struct device *dev)
-{
- char *str;
- ssize_t size;
- int ret;
-
- size = of_device_get_modalias(dev, NULL, 0);
- if (size < 0)
- return size;
-
- str = kmalloc(size + 1, GFP_KERNEL);
- if (!str)
- return -ENOMEM;
-
- of_device_get_modalias(dev, str, size);
- str[size] = '\0';
- ret = request_module(str);
- kfree(str);
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(of_device_request_module);
-
/**
* of_device_modalias - Fill buffer with newline terminated modalias string
* @dev: Calling device
@@ -318,7 +254,12 @@ EXPORT_SYMBOL_GPL(of_device_request_module);
*/
ssize_t of_device_modalias(struct device *dev, char *str, ssize_t len)
{
- ssize_t sl = of_device_get_modalias(dev, str, len - 2);
+ ssize_t sl;
+
+ if (!dev || !dev->of_node || dev->of_node_reused)
+ return -ENODEV;
+
+ sl = of_modalias(dev->of_node, str, len - 2);
if (sl < 0)
return sl;
if (sl > len - 2)
@@ -383,8 +324,8 @@ int of_device_uevent_modalias(const struct device *dev, struct kobj_uevent_env *
if (add_uevent_var(env, "MODALIAS="))
return -ENOMEM;
- sl = of_device_get_modalias(dev, &env->buf[env->buflen-1],
- sizeof(env->buf) - env->buflen);
+ sl = of_modalias(dev->of_node, &env->buf[env->buflen-1],
+ sizeof(env->buf) - env->buflen);
if (sl < 0)
return sl;
if (sl >= (sizeof(env->buf) - env->buflen))
diff --git a/drivers/of/module.c b/drivers/of/module.c
new file mode 100644
index 000000000000..0e8aa974f0f2
--- /dev/null
+++ b/drivers/of/module.c
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux kernel module helpers.
+ */
+
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+ssize_t of_modalias(const struct device_node *np, char *str, ssize_t len)
+{
+ const char *compat;
+ char *c;
+ struct property *p;
+ ssize_t csize;
+ ssize_t tsize;
+
+ /* Name & Type */
+ /* %p eats all alphanum characters, so %c must be used here */
+ csize = snprintf(str, len, "of:N%pOFn%c%s", np, 'T',
+ of_node_get_device_type(np));
+ tsize = csize;
+ len -= csize;
+ if (str)
+ str += csize;
+
+ of_property_for_each_string(np, "compatible", p, compat) {
+ csize = strlen(compat) + 1;
+ tsize += csize;
+ if (csize > len)
+ continue;
+
+ csize = snprintf(str, len, "C%s", compat);
+ for (c = str; c; ) {
+ c = strchr(c, ' ');
+ if (c)
+ *c++ = '_';
+ }
+ len -= csize;
+ str += csize;
+ }
+
+ return tsize;
+}
+
+int of_request_module(const struct device_node *np)
+{
+ char *str;
+ ssize_t size;
+ int ret;
+
+ if (!np)
+ return -ENODEV;
+
+ size = of_modalias(np, NULL, 0);
+ if (size < 0)
+ return size;
+
+ /* Reserve an additional byte for the trailing '\0' */
+ size++;
+
+ str = kmalloc(size, GFP_KERNEL);
+ if (!str)
+ return -ENOMEM;
+
+ of_modalias(np, str, size);
+ str[size - 1] = '\0';
+ ret = request_module(str);
+ kfree(str);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(of_request_module);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index a12420e28640..9291b2a0e887 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -2355,8 +2355,8 @@ of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
}
/* Select device driver */
- rc = of_modalias_node(nc, spi->modalias,
- sizeof(spi->modalias));
+ rc = of_alias_from_compatible(nc, spi->modalias,
+ sizeof(spi->modalias));
if (rc < 0) {
dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
goto err_out;
diff --git a/drivers/spmi/hisi-spmi-controller.c b/drivers/spmi/hisi-spmi-controller.c
index 5bd23262abd6..9cbd473487cb 100644
--- a/drivers/spmi/hisi-spmi-controller.c
+++ b/drivers/spmi/hisi-spmi-controller.c
@@ -324,13 +324,12 @@ err_put_controller:
return ret;
}
-static int spmi_del_controller(struct platform_device *pdev)
+static void spmi_del_controller(struct platform_device *pdev)
{
struct spmi_controller *ctrl = platform_get_drvdata(pdev);
spmi_controller_remove(ctrl);
spmi_controller_put(ctrl);
- return 0;
}
static const struct of_device_id spmi_controller_match_table[] = {
@@ -343,7 +342,7 @@ MODULE_DEVICE_TABLE(of, spmi_controller_match_table);
static struct platform_driver spmi_controller_driver = {
.probe = spmi_controller_probe,
- .remove = spmi_del_controller,
+ .remove_new = spmi_del_controller,
.driver = {
.name = "hisi_spmi_controller",
.of_match_table = spmi_controller_match_table,
diff --git a/drivers/spmi/spmi-mtk-pmif.c b/drivers/spmi/spmi-mtk-pmif.c
index ad511f2c3324..b3c991e1ea40 100644
--- a/drivers/spmi/spmi-mtk-pmif.c
+++ b/drivers/spmi/spmi-mtk-pmif.c
@@ -503,7 +503,7 @@ err_put_ctrl:
return err;
}
-static int mtk_spmi_remove(struct platform_device *pdev)
+static void mtk_spmi_remove(struct platform_device *pdev)
{
struct spmi_controller *ctrl = platform_get_drvdata(pdev);
struct pmif *arb = spmi_controller_get_drvdata(ctrl);
@@ -511,7 +511,6 @@ static int mtk_spmi_remove(struct platform_device *pdev)
clk_bulk_disable_unprepare(arb->nclks, arb->clks);
spmi_controller_remove(ctrl);
spmi_controller_put(ctrl);
- return 0;
}
static const struct of_device_id mtk_spmi_match_table[] = {
@@ -530,10 +529,10 @@ MODULE_DEVICE_TABLE(of, mtk_spmi_match_table);
static struct platform_driver mtk_spmi_driver = {
.driver = {
.name = "spmi-mtk",
- .of_match_table = of_match_ptr(mtk_spmi_match_table),
+ .of_match_table = mtk_spmi_match_table,
},
.probe = mtk_spmi_probe,
- .remove = mtk_spmi_remove,
+ .remove_new = mtk_spmi_remove,
};
module_platform_driver(mtk_spmi_driver);
diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c
index 8b6a42ab816f..dcb675d980d4 100644
--- a/drivers/spmi/spmi-pmic-arb.c
+++ b/drivers/spmi/spmi-pmic-arb.c
@@ -126,7 +126,7 @@ struct apid_data {
};
/**
- * spmi_pmic_arb - SPMI PMIC Arbiter object
+ * struct spmi_pmic_arb - SPMI PMIC Arbiter object
*
* @rd_base: on v1 "core", on v2 "observer" register base off DT.
* @wr_base: on v1 "core", on v2 "chnls" register base off DT.
@@ -180,7 +180,7 @@ struct spmi_pmic_arb {
};
/**
- * pmic_arb_ver: version dependent functionality.
+ * struct pmic_arb_ver_ops - version dependent functionality.
*
* @ver_str: version string.
* @ppid_to_apid: finds the apid for a given ppid.
@@ -1674,7 +1674,7 @@ err_put_ctrl:
return err;
}
-static int spmi_pmic_arb_remove(struct platform_device *pdev)
+static void spmi_pmic_arb_remove(struct platform_device *pdev)
{
struct spmi_controller *ctrl = platform_get_drvdata(pdev);
struct spmi_pmic_arb *pmic_arb = spmi_controller_get_drvdata(ctrl);
@@ -1682,7 +1682,6 @@ static int spmi_pmic_arb_remove(struct platform_device *pdev)
irq_set_chained_handler_and_data(pmic_arb->irq, NULL, NULL);
irq_domain_remove(pmic_arb->domain);
spmi_controller_put(ctrl);
- return 0;
}
static const struct of_device_id spmi_pmic_arb_match_table[] = {
@@ -1693,7 +1692,7 @@ MODULE_DEVICE_TABLE(of, spmi_pmic_arb_match_table);
static struct platform_driver spmi_pmic_arb_driver = {
.probe = spmi_pmic_arb_probe,
- .remove = spmi_pmic_arb_remove,
+ .remove_new = spmi_pmic_arb_remove,
.driver = {
.name = "spmi_pmic_arb",
.of_match_table = spmi_pmic_arb_match_table,
diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c
index 73551531ed43..7313d4c18a04 100644
--- a/drivers/spmi/spmi.c
+++ b/drivers/spmi/spmi.c
@@ -350,7 +350,8 @@ static void spmi_drv_remove(struct device *dev)
const struct spmi_driver *sdrv = to_spmi_driver(dev->driver);
pm_runtime_get_sync(dev);
- sdrv->remove(to_spmi_device(dev));
+ if (sdrv->remove)
+ sdrv->remove(to_spmi_device(dev));
pm_runtime_put_noidle(dev);
pm_runtime_disable(dev);
@@ -404,7 +405,7 @@ struct spmi_device *spmi_device_from_of(struct device_node *np)
EXPORT_SYMBOL_GPL(spmi_device_from_of);
/**
- * spmi_controller_alloc() - Allocate a new SPMI device
+ * spmi_device_alloc() - Allocate a new SPMI device
* @ctrl: associated controller
*
* Caller is responsible for either calling spmi_device_add() to add the
@@ -582,8 +583,9 @@ void spmi_controller_remove(struct spmi_controller *ctrl)
EXPORT_SYMBOL_GPL(spmi_controller_remove);
/**
- * spmi_driver_register() - Register client driver with SPMI core
+ * __spmi_driver_register() - Register client driver with SPMI core
* @sdrv: client driver to be associated with client-device.
+ * @owner: module owner
*
* This API will register the client driver with the SPMI framework.
* It is typically called from the driver's module-init function.
diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig
index afd05bf3345e..d3968fe2ebb8 100644
--- a/drivers/staging/iio/Kconfig
+++ b/drivers/staging/iio/Kconfig
@@ -10,7 +10,6 @@ source "drivers/staging/iio/adc/Kconfig"
source "drivers/staging/iio/addac/Kconfig"
source "drivers/staging/iio/frequency/Kconfig"
source "drivers/staging/iio/impedance-analyzer/Kconfig"
-source "drivers/staging/iio/meter/Kconfig"
source "drivers/staging/iio/resolver/Kconfig"
endmenu
diff --git a/drivers/staging/iio/Makefile b/drivers/staging/iio/Makefile
index 5ed56fe57e14..c50f1019f829 100644
--- a/drivers/staging/iio/Makefile
+++ b/drivers/staging/iio/Makefile
@@ -8,5 +8,4 @@ obj-y += adc/
obj-y += addac/
obj-y += frequency/
obj-y += impedance-analyzer/
-obj-y += meter/
obj-y += resolver/
diff --git a/drivers/staging/iio/meter/Kconfig b/drivers/staging/iio/meter/Kconfig
deleted file mode 100644
index aa6a3e7f6cdb..000000000000
--- a/drivers/staging/iio/meter/Kconfig
+++ /dev/null
@@ -1,37 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# IIO meter drivers configuration
-#
-menu "Active energy metering IC"
-
-config ADE7854
- tristate "Analog Devices ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver"
- depends on SPI || I2C
- help
- Say yes here to build support for Analog Devices ADE7854/58/68/78 Polyphase
- Multifunction Energy Metering IC Driver.
-
- To compile this driver as a module, choose M here: the
- module will be called ade7854.
-
-config ADE7854_I2C
- tristate "support I2C bus connection"
- depends on ADE7854 && I2C
- default y
- help
- Say Y here if you have ADE7854/58/68/78 hooked to an I2C bus.
-
- To compile this driver as a module, choose M here: the
- module will be called ade7854-i2c.
-
-config ADE7854_SPI
- tristate "support SPI bus connection"
- depends on ADE7854 && SPI
- default y
- help
- Say Y here if you have ADE7854/58/68/78 hooked to a SPI bus.
-
- To compile this driver as a module, choose M here: the
- module will be called ade7854-spi.
-
-endmenu
diff --git a/drivers/staging/iio/meter/Makefile b/drivers/staging/iio/meter/Makefile
deleted file mode 100644
index ed4547e38f3a..000000000000
--- a/drivers/staging/iio/meter/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# Makefile for metering ic drivers
-#
-
-obj-$(CONFIG_ADE7854) += ade7854.o
-obj-$(CONFIG_ADE7854_I2C) += ade7854-i2c.o
-obj-$(CONFIG_ADE7854_SPI) += ade7854-spi.o
diff --git a/drivers/staging/iio/meter/ade7854-i2c.c b/drivers/staging/iio/meter/ade7854-i2c.c
deleted file mode 100644
index 572d714eb0dd..000000000000
--- a/drivers/staging/iio/meter/ade7854-i2c.c
+++ /dev/null
@@ -1,153 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver (I2C Bus)
- *
- * Copyright 2010 Analog Devices Inc.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include "ade7854.h"
-
-static int ade7854_i2c_write_reg(struct device *dev,
- u16 reg_address,
- u32 val,
- int bits)
-{
- int ret;
- int count;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = (reg_address >> 8) & 0xFF;
- st->tx[1] = reg_address & 0xFF;
-
- switch (bits) {
- case 8:
- st->tx[2] = val & 0xFF;
- count = 3;
- break;
- case 16:
- st->tx[2] = (val >> 8) & 0xFF;
- st->tx[3] = val & 0xFF;
- count = 4;
- break;
- case 24:
- st->tx[2] = (val >> 16) & 0xFF;
- st->tx[3] = (val >> 8) & 0xFF;
- st->tx[4] = val & 0xFF;
- count = 5;
- break;
- case 32:
- st->tx[2] = (val >> 24) & 0xFF;
- st->tx[3] = (val >> 16) & 0xFF;
- st->tx[4] = (val >> 8) & 0xFF;
- st->tx[5] = val & 0xFF;
- count = 6;
- break;
- default:
- ret = -EINVAL;
- goto unlock;
- }
-
- ret = i2c_master_send(st->i2c, st->tx, count);
-
-unlock:
- mutex_unlock(&st->buf_lock);
-
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int ade7854_i2c_read_reg(struct device *dev,
- u16 reg_address,
- u32 *val,
- int bits)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- int ret;
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = (reg_address >> 8) & 0xFF;
- st->tx[1] = reg_address & 0xFF;
-
- ret = i2c_master_send(st->i2c, st->tx, 2);
- if (ret < 0)
- goto unlock;
-
- ret = i2c_master_recv(st->i2c, st->rx, bits);
- if (ret < 0)
- goto unlock;
-
- switch (bits) {
- case 8:
- *val = st->rx[0];
- break;
- case 16:
- *val = (st->rx[0] << 8) | st->rx[1];
- break;
- case 24:
- *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
- break;
- case 32:
- *val = (st->rx[0] << 24) | (st->rx[1] << 16) |
- (st->rx[2] << 8) | st->rx[3];
- break;
- default:
- ret = -EINVAL;
- goto unlock;
- }
-
-unlock:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int ade7854_i2c_probe(struct i2c_client *client)
-{
- struct ade7854_state *st;
- struct iio_dev *indio_dev;
-
- indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
- if (!indio_dev)
- return -ENOMEM;
- st = iio_priv(indio_dev);
- i2c_set_clientdata(client, indio_dev);
- st->read_reg = ade7854_i2c_read_reg;
- st->write_reg = ade7854_i2c_write_reg;
- st->i2c = client;
- st->irq = client->irq;
-
- return ade7854_probe(indio_dev, &client->dev);
-}
-
-static const struct i2c_device_id ade7854_id[] = {
- { "ade7854", 0 },
- { "ade7858", 0 },
- { "ade7868", 0 },
- { "ade7878", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(i2c, ade7854_id);
-
-static struct i2c_driver ade7854_i2c_driver = {
- .driver = {
- .name = "ade7854",
- },
- .probe_new = ade7854_i2c_probe,
- .id_table = ade7854_id,
-};
-module_i2c_driver(ade7854_i2c_driver);
-
-MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC I2C Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/meter/ade7854-spi.c b/drivers/staging/iio/meter/ade7854-spi.c
deleted file mode 100644
index f12a6c8b3e88..000000000000
--- a/drivers/staging/iio/meter/ade7854-spi.c
+++ /dev/null
@@ -1,160 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver (SPI Bus)
- *
- * Copyright 2010 Analog Devices Inc.
- */
-
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/spi/spi.h>
-#include <linux/slab.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include "ade7854.h"
-
-static int ade7854_spi_write_reg(struct device *dev,
- u16 reg_address,
- u32 val,
- int bits)
-{
- int ret;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- struct spi_transfer xfer = {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 4,
- };
-
- mutex_lock(&st->buf_lock);
- st->tx[0] = ADE7854_WRITE_REG;
- st->tx[1] = (reg_address >> 8) & 0xFF;
- st->tx[2] = reg_address & 0xFF;
- switch (bits) {
- case 8:
- st->tx[3] = val & 0xFF;
- break;
- case 16:
- xfer.len = 5;
- st->tx[3] = (val >> 8) & 0xFF;
- st->tx[4] = val & 0xFF;
- break;
- case 24:
- xfer.len = 6;
- st->tx[3] = (val >> 16) & 0xFF;
- st->tx[4] = (val >> 8) & 0xFF;
- st->tx[5] = val & 0xFF;
- break;
- case 32:
- xfer.len = 7;
- st->tx[3] = (val >> 24) & 0xFF;
- st->tx[4] = (val >> 16) & 0xFF;
- st->tx[5] = (val >> 8) & 0xFF;
- st->tx[6] = val & 0xFF;
- break;
- default:
- ret = -EINVAL;
- goto unlock;
- }
-
- ret = spi_sync_transfer(st->spi, &xfer, 1);
-unlock:
- mutex_unlock(&st->buf_lock);
-
- return ret;
-}
-
-static int ade7854_spi_read_reg(struct device *dev,
- u16 reg_address,
- u32 *val,
- int bits)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- int ret;
- struct spi_transfer xfers[] = {
- {
- .tx_buf = st->tx,
- .bits_per_word = 8,
- .len = 3,
- }, {
- .rx_buf = st->rx,
- .bits_per_word = 8,
- .len = bits,
- }
- };
-
- mutex_lock(&st->buf_lock);
-
- st->tx[0] = ADE7854_READ_REG;
- st->tx[1] = (reg_address >> 8) & 0xFF;
- st->tx[2] = reg_address & 0xFF;
-
- ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers));
- if (ret < 0) {
- dev_err(&st->spi->dev, "problem when reading register 0x%02X",
- reg_address);
- goto unlock;
- }
-
- switch (bits) {
- case 8:
- *val = st->rx[0];
- break;
- case 16:
- *val = be16_to_cpup((const __be16 *)st->rx);
- break;
- case 24:
- *val = (st->rx[0] << 16) | (st->rx[1] << 8) | st->rx[2];
- break;
- case 32:
- *val = be32_to_cpup((const __be32 *)st->rx);
- break;
- }
-
-unlock:
- mutex_unlock(&st->buf_lock);
- return ret;
-}
-
-static int ade7854_spi_probe(struct spi_device *spi)
-{
- struct ade7854_state *st;
- struct iio_dev *indio_dev;
-
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
- if (!indio_dev)
- return -ENOMEM;
- st = iio_priv(indio_dev);
- spi_set_drvdata(spi, indio_dev);
- st->read_reg = ade7854_spi_read_reg;
- st->write_reg = ade7854_spi_write_reg;
- st->irq = spi->irq;
- st->spi = spi;
-
- return ade7854_probe(indio_dev, &spi->dev);
-}
-
-static const struct spi_device_id ade7854_id[] = {
- { "ade7854", 0 },
- { "ade7858", 0 },
- { "ade7868", 0 },
- { "ade7878", 0 },
- { }
-};
-MODULE_DEVICE_TABLE(spi, ade7854_id);
-
-static struct spi_driver ade7854_driver = {
- .driver = {
- .name = "ade7854",
- },
- .probe = ade7854_spi_probe,
- .id_table = ade7854_id,
-};
-module_spi_driver(ade7854_driver);
-
-MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 SPI Driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/meter/ade7854.c b/drivers/staging/iio/meter/ade7854.c
deleted file mode 100644
index 68da6ecde6a3..000000000000
--- a/drivers/staging/iio/meter/ade7854.c
+++ /dev/null
@@ -1,556 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * ADE7854/58/68/78 Polyphase Multifunction Energy Metering IC Driver
- *
- * Copyright 2010 Analog Devices Inc.
- */
-
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/mutex.h>
-#include <linux/device.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/sysfs.h>
-#include <linux/list.h>
-#include <linux/module.h>
-
-#include <linux/iio/iio.h>
-#include <linux/iio/sysfs.h>
-#include "meter.h"
-#include "ade7854.h"
-
-static ssize_t ade7854_read_8bit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- u32 val = 0;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-
- ret = st->read_reg(dev, this_attr->address, &val, 8);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%u\n", val);
-}
-
-static ssize_t ade7854_read_16bit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- u32 val = 0;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-
- ret = st->read_reg(dev, this_attr->address, &val, 16);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%u\n", val);
-}
-
-static ssize_t ade7854_read_24bit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- u32 val;
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
-
- ret = st->read_reg(dev, this_attr->address, &val, 24);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%u\n", val);
-}
-
-static ssize_t ade7854_read_32bit(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- int ret;
- u32 val = 0;
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- ret = st->read_reg(dev, this_attr->address, &val, 32);
- if (ret < 0)
- return ret;
-
- return sprintf(buf, "%u\n", val);
-}
-
-static ssize_t ade7854_write_8bit(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- int ret;
- u8 val;
-
- ret = kstrtou8(buf, 10, &val);
- if (ret)
- goto error_ret;
- ret = st->write_reg(dev, this_attr->address, val, 8);
-
-error_ret:
- return ret ? ret : len;
-}
-
-static ssize_t ade7854_write_16bit(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- int ret;
- u16 val;
-
- ret = kstrtou16(buf, 10, &val);
- if (ret)
- goto error_ret;
- ret = st->write_reg(dev, this_attr->address, val, 16);
-
-error_ret:
- return ret ? ret : len;
-}
-
-static ssize_t ade7854_write_24bit(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- int ret;
- u32 val;
-
- ret = kstrtou32(buf, 10, &val);
- if (ret)
- goto error_ret;
- ret = st->write_reg(dev, this_attr->address, val, 24);
-
-error_ret:
- return ret ? ret : len;
-}
-
-static ssize_t ade7854_write_32bit(struct device *dev,
- struct device_attribute *attr,
- const char *buf,
- size_t len)
-{
- struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- int ret;
- u32 val;
-
- ret = kstrtou32(buf, 10, &val);
- if (ret)
- goto error_ret;
- ret = st->write_reg(dev, this_attr->address, val, 32);
-
-error_ret:
- return ret ? ret : len;
-}
-
-static int ade7854_reset(struct device *dev)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
- u32 val;
-
- st->read_reg(dev, ADE7854_CONFIG, &val, 16);
- val |= BIT(7); /* Software Chip Reset */
-
- return st->write_reg(dev, ADE7854_CONFIG, val, 16);
-}
-
-static IIO_DEV_ATTR_AIGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AIGAIN);
-static IIO_DEV_ATTR_BIGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BIGAIN);
-static IIO_DEV_ATTR_CIGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CIGAIN);
-static IIO_DEV_ATTR_NIGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_NIGAIN);
-static IIO_DEV_ATTR_AVGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AVGAIN);
-static IIO_DEV_ATTR_BVGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BVGAIN);
-static IIO_DEV_ATTR_CVGAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CVGAIN);
-static IIO_DEV_ATTR_APPARENT_POWER_A_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AVAGAIN);
-static IIO_DEV_ATTR_APPARENT_POWER_B_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BVAGAIN);
-static IIO_DEV_ATTR_APPARENT_POWER_C_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CVAGAIN);
-static IIO_DEV_ATTR_ACTIVE_POWER_A_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AWATTOS);
-static IIO_DEV_ATTR_ACTIVE_POWER_B_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BWATTOS);
-static IIO_DEV_ATTR_ACTIVE_POWER_C_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CWATTOS);
-static IIO_DEV_ATTR_REACTIVE_POWER_A_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AVARGAIN);
-static IIO_DEV_ATTR_REACTIVE_POWER_B_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BVARGAIN);
-static IIO_DEV_ATTR_REACTIVE_POWER_C_GAIN(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CVARGAIN);
-static IIO_DEV_ATTR_REACTIVE_POWER_A_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_AVAROS);
-static IIO_DEV_ATTR_REACTIVE_POWER_B_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_BVAROS);
-static IIO_DEV_ATTR_REACTIVE_POWER_C_OFFSET(0644,
- ade7854_read_24bit,
- ade7854_write_24bit,
- ADE7854_CVAROS);
-static IIO_DEV_ATTR_VPEAK(0644,
- ade7854_read_32bit,
- ade7854_write_32bit,
- ADE7854_VPEAK);
-static IIO_DEV_ATTR_IPEAK(0644,
- ade7854_read_32bit,
- ade7854_write_32bit,
- ADE7854_IPEAK);
-static IIO_DEV_ATTR_APHCAL(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_APHCAL);
-static IIO_DEV_ATTR_BPHCAL(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_BPHCAL);
-static IIO_DEV_ATTR_CPHCAL(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CPHCAL);
-static IIO_DEV_ATTR_CF1DEN(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CF1DEN);
-static IIO_DEV_ATTR_CF2DEN(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CF2DEN);
-static IIO_DEV_ATTR_CF3DEN(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CF3DEN);
-static IIO_DEV_ATTR_LINECYC(0644,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_LINECYC);
-static IIO_DEV_ATTR_SAGCYC(0644,
- ade7854_read_8bit,
- ade7854_write_8bit,
- ADE7854_SAGCYC);
-static IIO_DEV_ATTR_CFCYC(0644,
- ade7854_read_8bit,
- ade7854_write_8bit,
- ADE7854_CFCYC);
-static IIO_DEV_ATTR_PEAKCYC(0644,
- ade7854_read_8bit,
- ade7854_write_8bit,
- ADE7854_PEAKCYC);
-static IIO_DEV_ATTR_CHKSUM(ade7854_read_24bit,
- ADE7854_CHECKSUM);
-static IIO_DEV_ATTR_ANGLE0(ade7854_read_24bit,
- ADE7854_ANGLE0);
-static IIO_DEV_ATTR_ANGLE1(ade7854_read_24bit,
- ADE7854_ANGLE1);
-static IIO_DEV_ATTR_ANGLE2(ade7854_read_24bit,
- ADE7854_ANGLE2);
-static IIO_DEV_ATTR_AIRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_AIRMS);
-static IIO_DEV_ATTR_BIRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_BIRMS);
-static IIO_DEV_ATTR_CIRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_CIRMS);
-static IIO_DEV_ATTR_NIRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_NIRMS);
-static IIO_DEV_ATTR_AVRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_AVRMS);
-static IIO_DEV_ATTR_BVRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_BVRMS);
-static IIO_DEV_ATTR_CVRMS(0444,
- ade7854_read_24bit,
- NULL,
- ADE7854_CVRMS);
-static IIO_DEV_ATTR_AIRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_AIRMSOS);
-static IIO_DEV_ATTR_BIRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_BIRMSOS);
-static IIO_DEV_ATTR_CIRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CIRMSOS);
-static IIO_DEV_ATTR_AVRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_AVRMSOS);
-static IIO_DEV_ATTR_BVRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_BVRMSOS);
-static IIO_DEV_ATTR_CVRMSOS(0444,
- ade7854_read_16bit,
- ade7854_write_16bit,
- ADE7854_CVRMSOS);
-static IIO_DEV_ATTR_VOLT_A(ade7854_read_24bit,
- ADE7854_VAWV);
-static IIO_DEV_ATTR_VOLT_B(ade7854_read_24bit,
- ADE7854_VBWV);
-static IIO_DEV_ATTR_VOLT_C(ade7854_read_24bit,
- ADE7854_VCWV);
-static IIO_DEV_ATTR_CURRENT_A(ade7854_read_24bit,
- ADE7854_IAWV);
-static IIO_DEV_ATTR_CURRENT_B(ade7854_read_24bit,
- ADE7854_IBWV);
-static IIO_DEV_ATTR_CURRENT_C(ade7854_read_24bit,
- ADE7854_ICWV);
-static IIO_DEV_ATTR_AWATTHR(ade7854_read_32bit,
- ADE7854_AWATTHR);
-static IIO_DEV_ATTR_BWATTHR(ade7854_read_32bit,
- ADE7854_BWATTHR);
-static IIO_DEV_ATTR_CWATTHR(ade7854_read_32bit,
- ADE7854_CWATTHR);
-static IIO_DEV_ATTR_AFWATTHR(ade7854_read_32bit,
- ADE7854_AFWATTHR);
-static IIO_DEV_ATTR_BFWATTHR(ade7854_read_32bit,
- ADE7854_BFWATTHR);
-static IIO_DEV_ATTR_CFWATTHR(ade7854_read_32bit,
- ADE7854_CFWATTHR);
-static IIO_DEV_ATTR_AVARHR(ade7854_read_32bit,
- ADE7854_AVARHR);
-static IIO_DEV_ATTR_BVARHR(ade7854_read_32bit,
- ADE7854_BVARHR);
-static IIO_DEV_ATTR_CVARHR(ade7854_read_32bit,
- ADE7854_CVARHR);
-static IIO_DEV_ATTR_AVAHR(ade7854_read_32bit,
- ADE7854_AVAHR);
-static IIO_DEV_ATTR_BVAHR(ade7854_read_32bit,
- ADE7854_BVAHR);
-static IIO_DEV_ATTR_CVAHR(ade7854_read_32bit,
- ADE7854_CVAHR);
-
-static int ade7854_set_irq(struct device *dev, bool enable)
-{
- struct iio_dev *indio_dev = dev_to_iio_dev(dev);
- struct ade7854_state *st = iio_priv(indio_dev);
-
- int ret;
- u32 irqen;
-
- ret = st->read_reg(dev, ADE7854_MASK0, &irqen, 32);
- if (ret < 0)
- return ret;
-
- if (enable)
- irqen |= BIT(17); /* 1: interrupt enabled when all periodical
- * (at 8 kHz rate) DSP computations finish.
- */
- else
- irqen &= ~BIT(17);
-
- return st->write_reg(dev, ADE7854_MASK0, irqen, 32);
-}
-
-static int ade7854_initial_setup(struct iio_dev *indio_dev)
-{
- int ret;
- struct device *dev = &indio_dev->dev;
-
- /* Disable IRQ */
- ret = ade7854_set_irq(dev, false);
- if (ret) {
- dev_err(dev, "disable irq failed");
- goto err_ret;
- }
-
- ade7854_reset(dev);
- usleep_range(ADE7854_STARTUP_DELAY, ADE7854_STARTUP_DELAY + 100);
-
-err_ret:
- return ret;
-}
-
-static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("8000");
-
-static IIO_CONST_ATTR(name, "ade7854");
-
-static struct attribute *ade7854_attributes[] = {
- &iio_dev_attr_aigain.dev_attr.attr,
- &iio_dev_attr_bigain.dev_attr.attr,
- &iio_dev_attr_cigain.dev_attr.attr,
- &iio_dev_attr_nigain.dev_attr.attr,
- &iio_dev_attr_avgain.dev_attr.attr,
- &iio_dev_attr_bvgain.dev_attr.attr,
- &iio_dev_attr_cvgain.dev_attr.attr,
- &iio_dev_attr_linecyc.dev_attr.attr,
- &iio_dev_attr_sagcyc.dev_attr.attr,
- &iio_dev_attr_cfcyc.dev_attr.attr,
- &iio_dev_attr_peakcyc.dev_attr.attr,
- &iio_dev_attr_chksum.dev_attr.attr,
- &iio_dev_attr_apparent_power_a_gain.dev_attr.attr,
- &iio_dev_attr_apparent_power_b_gain.dev_attr.attr,
- &iio_dev_attr_apparent_power_c_gain.dev_attr.attr,
- &iio_dev_attr_active_power_a_offset.dev_attr.attr,
- &iio_dev_attr_active_power_b_offset.dev_attr.attr,
- &iio_dev_attr_active_power_c_offset.dev_attr.attr,
- &iio_dev_attr_reactive_power_a_gain.dev_attr.attr,
- &iio_dev_attr_reactive_power_b_gain.dev_attr.attr,
- &iio_dev_attr_reactive_power_c_gain.dev_attr.attr,
- &iio_dev_attr_reactive_power_a_offset.dev_attr.attr,
- &iio_dev_attr_reactive_power_b_offset.dev_attr.attr,
- &iio_dev_attr_reactive_power_c_offset.dev_attr.attr,
- &iio_dev_attr_awatthr.dev_attr.attr,
- &iio_dev_attr_bwatthr.dev_attr.attr,
- &iio_dev_attr_cwatthr.dev_attr.attr,
- &iio_dev_attr_afwatthr.dev_attr.attr,
- &iio_dev_attr_bfwatthr.dev_attr.attr,
- &iio_dev_attr_cfwatthr.dev_attr.attr,
- &iio_dev_attr_avarhr.dev_attr.attr,
- &iio_dev_attr_bvarhr.dev_attr.attr,
- &iio_dev_attr_cvarhr.dev_attr.attr,
- &iio_dev_attr_angle0.dev_attr.attr,
- &iio_dev_attr_angle1.dev_attr.attr,
- &iio_dev_attr_angle2.dev_attr.attr,
- &iio_dev_attr_avahr.dev_attr.attr,
- &iio_dev_attr_bvahr.dev_attr.attr,
- &iio_dev_attr_cvahr.dev_attr.attr,
- &iio_const_attr_sampling_frequency_available.dev_attr.attr,
- &iio_const_attr_name.dev_attr.attr,
- &iio_dev_attr_vpeak.dev_attr.attr,
- &iio_dev_attr_ipeak.dev_attr.attr,
- &iio_dev_attr_aphcal.dev_attr.attr,
- &iio_dev_attr_bphcal.dev_attr.attr,
- &iio_dev_attr_cphcal.dev_attr.attr,
- &iio_dev_attr_cf1den.dev_attr.attr,
- &iio_dev_attr_cf2den.dev_attr.attr,
- &iio_dev_attr_cf3den.dev_attr.attr,
- &iio_dev_attr_airms.dev_attr.attr,
- &iio_dev_attr_birms.dev_attr.attr,
- &iio_dev_attr_cirms.dev_attr.attr,
- &iio_dev_attr_nirms.dev_attr.attr,
- &iio_dev_attr_avrms.dev_attr.attr,
- &iio_dev_attr_bvrms.dev_attr.attr,
- &iio_dev_attr_cvrms.dev_attr.attr,
- &iio_dev_attr_airmsos.dev_attr.attr,
- &iio_dev_attr_birmsos.dev_attr.attr,
- &iio_dev_attr_cirmsos.dev_attr.attr,
- &iio_dev_attr_avrmsos.dev_attr.attr,
- &iio_dev_attr_bvrmsos.dev_attr.attr,
- &iio_dev_attr_cvrmsos.dev_attr.attr,
- &iio_dev_attr_volt_a.dev_attr.attr,
- &iio_dev_attr_volt_b.dev_attr.attr,
- &iio_dev_attr_volt_c.dev_attr.attr,
- &iio_dev_attr_current_a.dev_attr.attr,
- &iio_dev_attr_current_b.dev_attr.attr,
- &iio_dev_attr_current_c.dev_attr.attr,
- NULL,
-};
-
-static const struct attribute_group ade7854_attribute_group = {
- .attrs = ade7854_attributes,
-};
-
-static const struct iio_info ade7854_info = {
- .attrs = &ade7854_attribute_group,
-};
-
-int ade7854_probe(struct iio_dev *indio_dev, struct device *dev)
-{
- int ret;
- struct ade7854_state *st = iio_priv(indio_dev);
- /* setup the industrialio driver allocated elements */
- mutex_init(&st->buf_lock);
-
- indio_dev->dev.parent = dev;
- indio_dev->info = &ade7854_info;
- indio_dev->modes = INDIO_DIRECT_MODE;
-
- ret = devm_iio_device_register(dev, indio_dev);
- if (ret)
- return ret;
-
- /* Get the device into a sane initial state */
- return ade7854_initial_setup(indio_dev);
-}
-EXPORT_SYMBOL(ade7854_probe);
-
-MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
-MODULE_DESCRIPTION("Analog Devices ADE7854/58/68/78 Polyphase Energy Meter");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/staging/iio/meter/ade7854.h b/drivers/staging/iio/meter/ade7854.h
deleted file mode 100644
index 7a49f8f1016f..000000000000
--- a/drivers/staging/iio/meter/ade7854.h
+++ /dev/null
@@ -1,173 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _ADE7854_H
-#define _ADE7854_H
-
-#define ADE7854_AIGAIN 0x4380
-#define ADE7854_AVGAIN 0x4381
-#define ADE7854_BIGAIN 0x4382
-#define ADE7854_BVGAIN 0x4383
-#define ADE7854_CIGAIN 0x4384
-#define ADE7854_CVGAIN 0x4385
-#define ADE7854_NIGAIN 0x4386
-#define ADE7854_AIRMSOS 0x4387
-#define ADE7854_AVRMSOS 0x4388
-#define ADE7854_BIRMSOS 0x4389
-#define ADE7854_BVRMSOS 0x438A
-#define ADE7854_CIRMSOS 0x438B
-#define ADE7854_CVRMSOS 0x438C
-#define ADE7854_NIRMSOS 0x438D
-#define ADE7854_AVAGAIN 0x438E
-#define ADE7854_BVAGAIN 0x438F
-#define ADE7854_CVAGAIN 0x4390
-#define ADE7854_AWGAIN 0x4391
-#define ADE7854_AWATTOS 0x4392
-#define ADE7854_BWGAIN 0x4393
-#define ADE7854_BWATTOS 0x4394
-#define ADE7854_CWGAIN 0x4395
-#define ADE7854_CWATTOS 0x4396
-#define ADE7854_AVARGAIN 0x4397
-#define ADE7854_AVAROS 0x4398
-#define ADE7854_BVARGAIN 0x4399
-#define ADE7854_BVAROS 0x439A
-#define ADE7854_CVARGAIN 0x439B
-#define ADE7854_CVAROS 0x439C
-#define ADE7854_AFWGAIN 0x439D
-#define ADE7854_AFWATTOS 0x439E
-#define ADE7854_BFWGAIN 0x439F
-#define ADE7854_BFWATTOS 0x43A0
-#define ADE7854_CFWGAIN 0x43A1
-#define ADE7854_CFWATTOS 0x43A2
-#define ADE7854_AFVARGAIN 0x43A3
-#define ADE7854_AFVAROS 0x43A4
-#define ADE7854_BFVARGAIN 0x43A5
-#define ADE7854_BFVAROS 0x43A6
-#define ADE7854_CFVARGAIN 0x43A7
-#define ADE7854_CFVAROS 0x43A8
-#define ADE7854_VATHR1 0x43A9
-#define ADE7854_VATHR0 0x43AA
-#define ADE7854_WTHR1 0x43AB
-#define ADE7854_WTHR0 0x43AC
-#define ADE7854_VARTHR1 0x43AD
-#define ADE7854_VARTHR0 0x43AE
-#define ADE7854_RSV 0x43AF
-#define ADE7854_VANOLOAD 0x43B0
-#define ADE7854_APNOLOAD 0x43B1
-#define ADE7854_VARNOLOAD 0x43B2
-#define ADE7854_VLEVEL 0x43B3
-#define ADE7854_DICOEFF 0x43B5
-#define ADE7854_HPFDIS 0x43B6
-#define ADE7854_ISUMLVL 0x43B8
-#define ADE7854_ISUM 0x43BF
-#define ADE7854_AIRMS 0x43C0
-#define ADE7854_AVRMS 0x43C1
-#define ADE7854_BIRMS 0x43C2
-#define ADE7854_BVRMS 0x43C3
-#define ADE7854_CIRMS 0x43C4
-#define ADE7854_CVRMS 0x43C5
-#define ADE7854_NIRMS 0x43C6
-#define ADE7854_RUN 0xE228
-#define ADE7854_AWATTHR 0xE400
-#define ADE7854_BWATTHR 0xE401
-#define ADE7854_CWATTHR 0xE402
-#define ADE7854_AFWATTHR 0xE403
-#define ADE7854_BFWATTHR 0xE404
-#define ADE7854_CFWATTHR 0xE405
-#define ADE7854_AVARHR 0xE406
-#define ADE7854_BVARHR 0xE407
-#define ADE7854_CVARHR 0xE408
-#define ADE7854_AFVARHR 0xE409
-#define ADE7854_BFVARHR 0xE40A
-#define ADE7854_CFVARHR 0xE40B
-#define ADE7854_AVAHR 0xE40C
-#define ADE7854_BVAHR 0xE40D
-#define ADE7854_CVAHR 0xE40E
-#define ADE7854_IPEAK 0xE500
-#define ADE7854_VPEAK 0xE501
-#define ADE7854_STATUS0 0xE502
-#define ADE7854_STATUS1 0xE503
-#define ADE7854_OILVL 0xE507
-#define ADE7854_OVLVL 0xE508
-#define ADE7854_SAGLVL 0xE509
-#define ADE7854_MASK0 0xE50A
-#define ADE7854_MASK1 0xE50B
-#define ADE7854_IAWV 0xE50C
-#define ADE7854_IBWV 0xE50D
-#define ADE7854_ICWV 0xE50E
-#define ADE7854_VAWV 0xE510
-#define ADE7854_VBWV 0xE511
-#define ADE7854_VCWV 0xE512
-#define ADE7854_AWATT 0xE513
-#define ADE7854_BWATT 0xE514
-#define ADE7854_CWATT 0xE515
-#define ADE7854_AVA 0xE519
-#define ADE7854_BVA 0xE51A
-#define ADE7854_CVA 0xE51B
-#define ADE7854_CHECKSUM 0xE51F
-#define ADE7854_VNOM 0xE520
-#define ADE7854_PHSTATUS 0xE600
-#define ADE7854_ANGLE0 0xE601
-#define ADE7854_ANGLE1 0xE602
-#define ADE7854_ANGLE2 0xE603
-#define ADE7854_PERIOD 0xE607
-#define ADE7854_PHNOLOAD 0xE608
-#define ADE7854_LINECYC 0xE60C
-#define ADE7854_ZXTOUT 0xE60D
-#define ADE7854_COMPMODE 0xE60E
-#define ADE7854_GAIN 0xE60F
-#define ADE7854_CFMODE 0xE610
-#define ADE7854_CF1DEN 0xE611
-#define ADE7854_CF2DEN 0xE612
-#define ADE7854_CF3DEN 0xE613
-#define ADE7854_APHCAL 0xE614
-#define ADE7854_BPHCAL 0xE615
-#define ADE7854_CPHCAL 0xE616
-#define ADE7854_PHSIGN 0xE617
-#define ADE7854_CONFIG 0xE618
-#define ADE7854_MMODE 0xE700
-#define ADE7854_ACCMODE 0xE701
-#define ADE7854_LCYCMODE 0xE702
-#define ADE7854_PEAKCYC 0xE703
-#define ADE7854_SAGCYC 0xE704
-#define ADE7854_CFCYC 0xE705
-#define ADE7854_HSDC_CFG 0xE706
-#define ADE7854_CONFIG2 0xEC01
-
-#define ADE7854_READ_REG 0x1
-#define ADE7854_WRITE_REG 0x0
-
-#define ADE7854_MAX_TX 7
-#define ADE7854_MAX_RX 7
-#define ADE7854_STARTUP_DELAY 1000
-
-#define ADE7854_SPI_SLOW (u32)(300 * 1000)
-#define ADE7854_SPI_BURST (u32)(1000 * 1000)
-#define ADE7854_SPI_FAST (u32)(2000 * 1000)
-
-/**
- * struct ade7854_state - device instance specific data
- * @spi: actual spi_device
- * @read_reg Wrapper function for I2C and SPI read
- * @write_reg Wrapper function for I2C and SPI write
- * @indio_dev: industrial I/O device structure
- * @buf_lock: mutex to protect tx and rx
- * @tx: transmit buffer
- * @rx: receive buffer
- **/
-struct ade7854_state {
- struct spi_device *spi;
- struct i2c_client *i2c;
- int (*read_reg)(struct device *dev, u16 reg_address, u32 *val,
- int bits);
- int (*write_reg)(struct device *dev, u16 reg_address, u32 val,
- int bits);
- int irq;
- struct mutex buf_lock;
- u8 tx[ADE7854_MAX_TX] __aligned(IIO_DMA_MINALIGN);
- u8 rx[ADE7854_MAX_RX];
-
-};
-
-int ade7854_probe(struct iio_dev *indio_dev, struct device *dev);
-int ade7854_remove(struct iio_dev *indio_dev);
-
-#endif
diff --git a/drivers/staging/iio/meter/meter.h b/drivers/staging/iio/meter/meter.h
deleted file mode 100644
index 5ed59bf30a25..000000000000
--- a/drivers/staging/iio/meter/meter.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef _METER_H
-#define _METER_H
-
-#include <linux/iio/sysfs.h>
-
-/* metering ic types of attribute */
-
-#define IIO_DEV_ATTR_CURRENT_A_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_a_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_B_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_b_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_C_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_c_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VOLT_A_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(volt_a_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VOLT_B_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(volt_b_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VOLT_C_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(volt_c_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_A_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_a_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_B_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_b_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_C_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_c_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_A_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_a_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_B_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_b_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_C_OFFSET(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_c_offset, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_A_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_a_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_B_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_b_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_C_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(current_c_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_APPARENT_POWER_A_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(apparent_power_a_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_APPARENT_POWER_B_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(apparent_power_b_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_APPARENT_POWER_C_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(apparent_power_c_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_A_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_a_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_B_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_b_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_ACTIVE_POWER_C_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(active_power_c_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_A_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_a_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_B_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_b_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_REACTIVE_POWER_C_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(reactive_power_c_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_A(_show, _addr) \
- IIO_DEVICE_ATTR(current_a, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_B(_show, _addr) \
- IIO_DEVICE_ATTR(current_b, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CURRENT_C(_show, _addr) \
- IIO_DEVICE_ATTR(current_c, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_VOLT_A(_show, _addr) \
- IIO_DEVICE_ATTR(volt_a, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_VOLT_B(_show, _addr) \
- IIO_DEVICE_ATTR(volt_b, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_VOLT_C(_show, _addr) \
- IIO_DEVICE_ATTR(volt_c, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_AENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(aenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_LENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(lenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_RAENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(raenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_LAENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(laenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_VAENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(vaenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_LVAENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(lvaenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_RVAENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(rvaenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_LVARENERGY(_show, _addr) \
- IIO_DEVICE_ATTR(lvarenergy, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CHKSUM(_show, _addr) \
- IIO_DEVICE_ATTR(chksum, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_ANGLE0(_show, _addr) \
- IIO_DEVICE_ATTR(angle0, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_ANGLE1(_show, _addr) \
- IIO_DEVICE_ATTR(angle1, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_ANGLE2(_show, _addr) \
- IIO_DEVICE_ATTR(angle2, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_AWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(awatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_BWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(bwatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(cwatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_AFWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(afwatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_BFWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(bfwatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CFWATTHR(_show, _addr) \
- IIO_DEVICE_ATTR(cfwatthr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_AVARHR(_show, _addr) \
- IIO_DEVICE_ATTR(avarhr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_BVARHR(_show, _addr) \
- IIO_DEVICE_ATTR(bvarhr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CVARHR(_show, _addr) \
- IIO_DEVICE_ATTR(cvarhr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_AVAHR(_show, _addr) \
- IIO_DEVICE_ATTR(avahr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_BVAHR(_show, _addr) \
- IIO_DEVICE_ATTR(bvahr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_CVAHR(_show, _addr) \
- IIO_DEVICE_ATTR(cvahr, 0444, _show, NULL, _addr)
-
-#define IIO_DEV_ATTR_IOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(ios, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_PHCAL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(phcal, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_APHCAL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(aphcal, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BPHCAL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bphcal, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CPHCAL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cphcal, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_APOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(apos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AAPOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(aapos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BAPOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bapos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CAPOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(capos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AVRMSGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(avrmsgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BVRMSGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bvrmsgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CVRMSGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cvrmsgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AIGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(aigain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BIGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bigain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CIGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cigain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_NIGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(nigain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AVGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(avgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BVGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bvgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CVGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cvgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_WGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(wgain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_WDIV(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(wdiv, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CFNUM(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cfnum, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CFDEN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cfden, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CF1DEN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cf1den, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CF2DEN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cf2den, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CF3DEN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cf3den, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_IRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(irms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vrms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AIRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(airms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BIRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(birms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CIRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cirms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_NIRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(nirms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AVRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(avrms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BVRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bvrms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CVRMS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cvrms, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_IRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(irmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vrmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AIRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(airmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BIRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(birmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CIRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cirmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_AVRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(avrmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_BVRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(bvrmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CVRMSOS(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cvrmsos, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VAGAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vagain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_PGA_GAIN(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(pga_gain, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VADIV(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vadiv, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_LINECYC(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(linecyc, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_SAGCYC(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(sagcyc, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_CFCYC(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(cfcyc, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_PEAKCYC(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(peakcyc, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_SAGLVL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(saglvl, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_IPKLVL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(ipklvl, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VPKLVL(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vpklvl, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_IPEAK(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(ipeak, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_RIPEAK(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(ripeak, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VPEAK(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vpeak, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_RVPEAK(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(rvpeak, _mode, _show, _store, _addr)
-
-#define IIO_DEV_ATTR_VPERIOD(_mode, _show, _store, _addr) \
- IIO_DEVICE_ATTR(vperiod, _mode, _show, _store, _addr)
-
-/* active energy register, AENERGY, is more than half full */
-#define IIO_EVENT_ATTR_AENERGY_HALF_FULL(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(aenergy_half_full, _evlist, _show, _store, _mask)
-
-/* a SAG on the line voltage */
-#define IIO_EVENT_ATTR_LINE_VOLT_SAG(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(line_volt_sag, _evlist, _show, _store, _mask)
-
-/*
- * Indicates the end of energy accumulation over an integer number
- * of half line cycles
- */
-#define IIO_EVENT_ATTR_CYCEND(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(cycend, _evlist, _show, _store, _mask)
-
-/* on the rising and falling edge of the voltage waveform */
-#define IIO_EVENT_ATTR_ZERO_CROSS(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(zero_cross, _evlist, _show, _store, _mask)
-
-/* the active energy register has overflowed */
-#define IIO_EVENT_ATTR_AENERGY_OVERFLOW(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(aenergy_overflow, _evlist, _show, _store, _mask)
-
-/* the apparent energy register has overflowed */
-#define IIO_EVENT_ATTR_VAENERGY_OVERFLOW(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(vaenergy_overflow, _evlist, _show, _store, _mask)
-
-/* the active energy register, VAENERGY, is more than half full */
-#define IIO_EVENT_ATTR_VAENERGY_HALF_FULL(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(vaenergy_half_full, _evlist, _show, _store, _mask)
-
-/* the power has gone from negative to positive */
-#define IIO_EVENT_ATTR_PPOS(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(ppos, _evlist, _show, _store, _mask)
-
-/* the power has gone from positive to negative */
-#define IIO_EVENT_ATTR_PNEG(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(pneg, _evlist, _show, _store, _mask)
-
-/* waveform sample from Channel 1 has exceeded the IPKLVL value */
-#define IIO_EVENT_ATTR_IPKLVL_EXC(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(ipklvl_exc, _evlist, _show, _store, _mask)
-
-/* waveform sample from Channel 2 has exceeded the VPKLVL value */
-#define IIO_EVENT_ATTR_VPKLVL_EXC(_evlist, _show, _store, _mask) \
- IIO_EVENT_ATTR_SH(vpklvl_exc, _evlist, _show, _store, _mask)
-
-#endif /* _METER_H */
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig
index 84caac32f0fd..341abaed4ce2 100644
--- a/drivers/tty/Kconfig
+++ b/drivers/tty/Kconfig
@@ -301,6 +301,15 @@ config GOLDFISH_TTY_EARLY_CONSOLE
default y if GOLDFISH_TTY=y
select SERIAL_EARLYCON
+config IPWIRELESS
+ tristate "IPWireless 3G UMTS PCMCIA card support"
+ depends on PCMCIA && NETDEVICES
+ select PPP
+ help
+ This is a driver for 3G UMTS PCMCIA card from IPWireless company. In
+ some countries (for example Czech Republic, T-Mobile ISP) this card
+ is shipped for service called UMTS 4G.
+
config N_GSM
tristate "GSM MUX line discipline support (EXPERIMENTAL)"
depends on NET
diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c
index 8305a5dfb910..84d91b1c1eed 100644
--- a/drivers/usb/common/ulpi.c
+++ b/drivers/usb/common/ulpi.c
@@ -229,7 +229,7 @@ static int ulpi_read_id(struct ulpi *ulpi)
request_module("ulpi:v%04xp%04x", ulpi->id.vendor, ulpi->id.product);
return 0;
err:
- of_device_request_module(&ulpi->dev);
+ of_request_module(ulpi->dev.of_node);
return 0;
}
diff --git a/drivers/w1/masters/Kconfig b/drivers/w1/masters/Kconfig
index 692cac3ff0ee..ad316573288a 100644
--- a/drivers/w1/masters/Kconfig
+++ b/drivers/w1/masters/Kconfig
@@ -53,7 +53,7 @@ config W1_MASTER_GPIO
config HDQ_MASTER_OMAP
tristate "OMAP HDQ driver"
- depends on ARCH_OMAP
+ depends on ARCH_OMAP || COMPILE_TEST
help
Say Y here if you want support for the 1-wire or HDQ Interface
on an OMAP processor.
diff --git a/drivers/w1/masters/ds2482.c b/drivers/w1/masters/ds2482.c
index 3d8b51316bef..c1de8a92e144 100644
--- a/drivers/w1/masters/ds2482.c
+++ b/drivers/w1/masters/ds2482.c
@@ -15,7 +15,6 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/delay.h>
-#include <asm/delay.h>
#include <linux/w1.h>
@@ -36,7 +35,7 @@ MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \
/* extra configurations - e.g. 1WS */
static int extra_config;
-module_param(extra_config, int, S_IRUGO | S_IWUSR);
+module_param(extra_config, int, 0644);
MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
/*
@@ -78,10 +77,8 @@ MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8
* To set the channel, write the value at the index of the channel.
* Read and compare against the corresponding value to verify the change.
*/
-static const u8 ds2482_chan_wr[8] =
- { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
-static const u8 ds2482_chan_rd[8] =
- { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
+static const u8 ds2482_chan_wr[8] = { 0xF0, 0xE1, 0xD2, 0xC3, 0xB4, 0xA5, 0x96, 0x87 };
+static const u8 ds2482_chan_rd[8] = { 0xB8, 0xB1, 0xAA, 0xA3, 0x9C, 0x95, 0x8E, 0x87 };
/*
@@ -454,7 +451,8 @@ static int ds2482_probe(struct i2c_client *client)
I2C_FUNC_SMBUS_BYTE))
return -ENODEV;
- if (!(data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL))) {
+ data = kzalloc(sizeof(struct ds2482_data), GFP_KERNEL);
+ if (!data) {
err = -ENOMEM;
goto exit;
}
@@ -544,6 +542,7 @@ static void ds2482_remove(struct i2c_client *client)
*/
static const struct i2c_device_id ds2482_id[] = {
{ "ds2482", 0 },
+ { "ds2484", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds2482_id);
diff --git a/drivers/w1/masters/ds2490.c b/drivers/w1/masters/ds2490.c
index 0eb560fc0153..5f5b97e24700 100644
--- a/drivers/w1/masters/ds2490.c
+++ b/drivers/w1/masters/ds2490.c
@@ -304,6 +304,7 @@ static void ds_reset_device(struct ds_device *dev)
if (dev->spu_sleep) {
/* lower 4 bits are 0, see ds_set_pullup */
u8 del = dev->spu_sleep>>4;
+
if (ds_send_control(dev, COMM_SET_DURATION | COMM_IM, del))
dev_err(&dev->udev->dev,
"%s: Error setting duration\n", __func__);
@@ -731,7 +732,8 @@ static void ds9490r_search(void *data, struct w1_master *master,
break;
if (st.data_in_buffer_status) {
- /* Bulk in can receive partial ids, but when it does
+ /*
+ * Bulk in can receive partial ids, but when it does
* they fail crc and will be discarded anyway.
* That has only been seen when status in buffer
* is 0 and bulk is read anyway, so don't read
@@ -743,8 +745,10 @@ static void ds9490r_search(void *data, struct w1_master *master,
break;
for (i = 0; i < err/8; ++i) {
found_ids[found++] = buf[i];
- /* can't know if there will be a discrepancy
- * value after until the next id */
+ /*
+ * can't know if there will be a discrepancy
+ * value after until the next id
+ */
if (found == search_limit) {
master->search_id = buf[i];
break;
@@ -760,7 +764,8 @@ static void ds9490r_search(void *data, struct w1_master *master,
if (found <= search_limit) {
master->search_id = 0;
} else if (!test_bit(W1_WARN_MAX_COUNT, &master->flags)) {
- /* Only max_slave_count will be scanned in a search,
+ /*
+ * Only max_slave_count will be scanned in a search,
* but it will start where it left off next search
* until all ids are identified and then it will start
* over. A continued search will report the previous
diff --git a/drivers/w1/masters/matrox_w1.c b/drivers/w1/masters/matrox_w1.c
index ee716c715710..2852cd2dc67c 100644
--- a/drivers/w1/masters/matrox_w1.c
+++ b/drivers/w1/masters/matrox_w1.c
@@ -7,7 +7,7 @@
#include <asm/types.h>
#include <linux/atomic.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <linux/delay.h>
#include <linux/kernel.h>
@@ -39,8 +39,7 @@
#define MATROX_GET_DATA 0x2B
#define MATROX_CURSOR_CTL 0x06
-struct matrox_device
-{
+struct matrox_device {
void __iomem *base_addr;
void __iomem *port_index;
void __iomem *port_data;
@@ -64,7 +63,7 @@ struct matrox_device
*
* Port mapping.
*/
-static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
+static inline u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
{
u8 ret;
@@ -75,7 +74,7 @@ static __inline__ u8 matrox_w1_read_reg(struct matrox_device *dev, u8 reg)
return ret;
}
-static __inline__ void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
+static inline void matrox_w1_write_reg(struct matrox_device *dev, u8 reg, u8 val)
{
writeb(reg, dev->port_index);
writeb(val, dev->port_data);
@@ -123,13 +122,8 @@ static int matrox_w1_probe(struct pci_dev *pdev, const struct pci_device_id *ent
dev = kzalloc(sizeof(struct matrox_device) +
sizeof(struct w1_bus_master), GFP_KERNEL);
- if (!dev) {
- dev_err(&pdev->dev,
- "%s: Failed to create new matrox_device object.\n",
- __func__);
+ if (!dev)
return -ENOMEM;
- }
-
dev->bus_master = (struct w1_bus_master *)(dev + 1);
diff --git a/drivers/w1/masters/omap_hdq.c b/drivers/w1/masters/omap_hdq.c
index bf2ec59c1f9d..6a39b71eb718 100644
--- a/drivers/w1/masters/omap_hdq.c
+++ b/drivers/w1/masters/omap_hdq.c
@@ -1,12 +1,6 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
- * drivers/w1/masters/omap_hdq.c
- *
* Copyright (C) 2007,2012 Texas Instruments, Inc.
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
- *
*/
#include <linux/kernel.h>
#include <linux/module.h>
@@ -48,7 +42,7 @@
static DECLARE_WAIT_QUEUE_HEAD(hdq_wait_queue);
static int w1_id;
-module_param(w1_id, int, S_IRUSR);
+module_param(w1_id, int, 0400);
MODULE_PARM_DESC(w1_id, "1-wire id for the slave detection in HDQ mode");
struct hdq_data {
@@ -579,10 +573,8 @@ static int omap_hdq_probe(struct platform_device *pdev)
const char *mode;
hdq_data = devm_kzalloc(dev, sizeof(*hdq_data), GFP_KERNEL);
- if (!hdq_data) {
- dev_dbg(&pdev->dev, "unable to allocate memory\n");
+ if (!hdq_data)
return -ENOMEM;
- }
hdq_data->dev = dev;
platform_set_drvdata(pdev, hdq_data);
diff --git a/drivers/w1/masters/w1-gpio.c b/drivers/w1/masters/w1-gpio.c
index 530c77b8d062..e45acb6d916e 100644
--- a/drivers/w1/masters/w1-gpio.c
+++ b/drivers/w1/masters/w1-gpio.c
@@ -101,10 +101,8 @@ static int w1_gpio_probe(struct platform_device *pdev)
master = devm_kzalloc(dev, sizeof(struct w1_bus_master),
GFP_KERNEL);
- if (!master) {
- dev_err(dev, "Out of memory\n");
+ if (!master)
return -ENOMEM;
- }
pdata->gpiod = devm_gpiod_get_index(dev, NULL, 0, gflags);
if (IS_ERR(pdata->gpiod)) {
diff --git a/drivers/w1/slaves/w1_ds2406.c b/drivers/w1/slaves/w1_ds2406.c
index 6c269af73c80..2f5926859b8b 100644
--- a/drivers/w1/slaves/w1_ds2406.c
+++ b/drivers/w1/slaves/w1_ds2406.c
@@ -27,11 +27,11 @@ static ssize_t w1_f12_read_state(
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t count)
{
- u8 w1_buf[6]={W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0};
+ u8 w1_buf[6] = {W1_F12_FUNC_READ_STATUS, 7, 0, 0, 0, 0};
struct w1_slave *sl = kobj_to_w1_slave(kobj);
- u16 crc=0;
+ u16 crc = 0;
int i;
- ssize_t rtnval=1;
+ ssize_t rtnval = 1;
if (off != 0)
return 0;
@@ -47,12 +47,12 @@ static ssize_t w1_f12_read_state(
w1_write_block(sl->master, w1_buf, 3);
w1_read_block(sl->master, w1_buf+3, 3);
- for (i=0; i<6; i++)
- crc=crc16_byte(crc, w1_buf[i]);
- if (crc==0xb001) /* good read? */
- *buf=((w1_buf[3]>>5)&3)|0x30;
+ for (i = 0; i < 6; i++)
+ crc = crc16_byte(crc, w1_buf[i]);
+ if (crc == 0xb001) /* good read? */
+ *buf = ((w1_buf[3]>>5)&3)|0x30;
else
- rtnval=-EIO;
+ rtnval = -EIO;
mutex_unlock(&sl->master->bus_mutex);
@@ -65,10 +65,10 @@ static ssize_t w1_f12_write_output(
char *buf, loff_t off, size_t count)
{
struct w1_slave *sl = kobj_to_w1_slave(kobj);
- u8 w1_buf[6]={W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0};
- u16 crc=0;
+ u8 w1_buf[6] = {W1_F12_FUNC_WRITE_STATUS, 7, 0, 0, 0, 0};
+ u16 crc = 0;
int i;
- ssize_t rtnval=1;
+ ssize_t rtnval = 1;
if (count != 1 || off != 0)
return -EFAULT;
@@ -83,12 +83,12 @@ static ssize_t w1_f12_write_output(
w1_buf[3] = (((*buf)&3)<<5)|0x1F;
w1_write_block(sl->master, w1_buf, 4);
w1_read_block(sl->master, w1_buf+4, 2);
- for (i=0; i<6; i++)
- crc=crc16_byte(crc, w1_buf[i]);
- if (crc==0xb001) /* good read? */
+ for (i = 0; i < 6; i++)
+ crc = crc16_byte(crc, w1_buf[i]);
+ if (crc == 0xb001) /* good read? */
w1_write_8(sl->master, 0xFF);
else
- rtnval=-EIO;
+ rtnval = -EIO;
mutex_unlock(&sl->master->bus_mutex);
return rtnval;
@@ -99,7 +99,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
{
.attr = {
.name = "state",
- .mode = S_IRUGO,
+ .mode = 0444,
},
.size = 1,
.read = w1_f12_read_state,
@@ -107,7 +107,7 @@ static struct bin_attribute w1_f12_sysfs_bin_files[NB_SYSFS_BIN_FILES] = {
{
.attr = {
.name = "output",
- .mode = S_IRUGO | S_IWUSR | S_IWGRP,
+ .mode = 0664,
},
.size = 1,
.write = w1_f12_write_output,
@@ -133,6 +133,7 @@ static int w1_f12_add_slave(struct w1_slave *sl)
static void w1_f12_remove_slave(struct w1_slave *sl)
{
int i;
+
for (i = NB_SYSFS_BIN_FILES - 1; i >= 0; --i)
sysfs_remove_bin_file(&sl->dev.kobj,
&(w1_f12_sysfs_bin_files[i]));
diff --git a/drivers/w1/slaves/w1_ds2408.c b/drivers/w1/slaves/w1_ds2408.c
index ad102c577122..56f822a1dfdb 100644
--- a/drivers/w1/slaves/w1_ds2408.c
+++ b/drivers/w1/slaves/w1_ds2408.c
@@ -35,12 +35,12 @@
#define W1_F29_SUCCESS_CONFIRM_BYTE 0xAA
-static int _read_reg(struct w1_slave *sl, u8 address, unsigned char* buf)
+static int _read_reg(struct w1_slave *sl, u8 address, unsigned char *buf)
{
u8 wrbuf[3];
- dev_dbg(&sl->dev,
- "Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
- sl, (unsigned int)address, buf);
+
+ dev_dbg(&sl->dev, "Reading with slave: %p, reg addr: %0#4x, buff addr: %p",
+ sl, (unsigned int)address, buf);
if (!buf)
return -EINVAL;
@@ -206,7 +206,7 @@ out:
}
-/**
+/*
* Writing to the activity file resets the activity latches.
*/
static ssize_t activity_write(struct file *filp, struct kobject *kobj,
@@ -292,7 +292,7 @@ static int w1_f29_disable_test_mode(struct w1_slave *sl)
{
int res;
u8 magic[10] = {0x96, };
- u64 rn = le64_to_cpu(*((u64*)&sl->reg_num));
+ u64 rn = le64_to_cpu(*((u64 *)&sl->reg_num));
memcpy(&magic[1], &rn, 8);
magic[9] = 0x3C;
diff --git a/drivers/w1/slaves/w1_ds2413.c b/drivers/w1/slaves/w1_ds2413.c
index c8cfac555b48..739009806467 100644
--- a/drivers/w1/slaves/w1_ds2413.c
+++ b/drivers/w1/slaves/w1_ds2413.c
@@ -99,8 +99,10 @@ static ssize_t output_write(struct file *filp, struct kobject *kobj,
if (w1_reset_select_slave(sl))
goto out;
- /* according to the DS2413 datasheet the most significant 6 bits
- should be set to "1"s, so do it now */
+ /*
+ * according to the DS2413 datasheet the most significant 6 bits
+ * should be set to "1"s, so do it now
+ */
*buf = *buf | 0xFC;
while (retries--) {
@@ -126,7 +128,7 @@ out:
return bytes_written;
}
-static BIN_ATTR(output, S_IRUGO | S_IWUSR | S_IWGRP, NULL, output_write, 1);
+static BIN_ATTR(output, 0664, NULL, output_write, 1);
static struct bin_attribute *w1_f3a_bin_attrs[] = {
&bin_attr_state,
diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c
index 0f72df15a024..9f21fd98f799 100644
--- a/drivers/w1/slaves/w1_ds2433.c
+++ b/drivers/w1/slaves/w1_ds2433.c
@@ -42,7 +42,7 @@ struct w1_f23_data {
u32 validcrc;
};
-/**
+/*
* Check the file size bounds and adjusts count as needed.
* This would not be needed if the file size didn't reset to 0 after a write.
*/
@@ -98,7 +98,8 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
u8 wrbuf[3];
#endif
- if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+ count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE);
+ if (!count)
return 0;
mutex_lock(&sl->master->bus_mutex);
@@ -115,7 +116,7 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj,
}
memcpy(buf, &data->memory[off], count);
-#else /* CONFIG_W1_SLAVE_DS2433_CRC */
+#else /* CONFIG_W1_SLAVE_DS2433_CRC */
/* read directly from the EEPROM */
if (w1_reset_select_slave(sl)) {
@@ -138,16 +139,17 @@ out_up:
}
/**
- * Writes to the scratchpad and reads it back for verification.
+ * w1_f23_write() - Writes to the scratchpad and reads it back for verification.
+ * @sl: The slave structure
+ * @addr: Address for the write
+ * @len: length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @data: The data to write
+ *
* Then copies the scratchpad to EEPROM.
* The data must be on one page.
* The master must be locked.
*
- * @param sl The slave structure
- * @param addr Address for the write
- * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
- * @param data The data to write
- * @return 0=Success -1=failure
+ * Return: 0=Success, -1=failure
*/
static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
@@ -207,7 +209,8 @@ static ssize_t eeprom_write(struct file *filp, struct kobject *kobj,
struct w1_slave *sl = kobj_to_w1_slave(kobj);
int addr, len, idx;
- if ((count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE)) == 0)
+ count = w1_f23_fix_count(off, count, W1_EEPROM_SIZE);
+ if (!count)
return 0;
#ifdef CONFIG_W1_SLAVE_DS2433_CRC
diff --git a/drivers/w1/slaves/w1_ds2780.c b/drivers/w1/slaves/w1_ds2780.c
index 9dcb5a54f7fc..3cde1bb1886b 100644
--- a/drivers/w1/slaves/w1_ds2780.c
+++ b/drivers/w1/slaves/w1_ds2780.c
@@ -91,6 +91,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
loff_t off, size_t count)
{
struct device *dev = kobj_to_dev(kobj);
+
return w1_ds2780_io(dev, buf, off, count, 0);
}
diff --git a/drivers/w1/slaves/w1_ds2781.c b/drivers/w1/slaves/w1_ds2781.c
index 2cb7c020b607..e418484b4a49 100644
--- a/drivers/w1/slaves/w1_ds2781.c
+++ b/drivers/w1/slaves/w1_ds2781.c
@@ -88,6 +88,7 @@ static ssize_t w1_slave_read(struct file *filp, struct kobject *kobj,
loff_t off, size_t count)
{
struct device *dev = kobj_to_dev(kobj);
+
return w1_ds2781_io(dev, buf, off, count, 0);
}
diff --git a/drivers/w1/slaves/w1_ds2805.c b/drivers/w1/slaves/w1_ds2805.c
index 6b5d12ba1b65..4c1a2c515317 100644
--- a/drivers/w1/slaves/w1_ds2805.c
+++ b/drivers/w1/slaves/w1_ds2805.c
@@ -264,7 +264,7 @@ out_up:
static struct bin_attribute w1_f0d_bin_attr = {
.attr = {
.name = "eeprom",
- .mode = S_IRUGO | S_IWUSR,
+ .mode = 0644,
},
.size = W1_F0D_EEPROM_SIZE,
.read = w1_f0d_read_bin,
diff --git a/drivers/w1/slaves/w1_ds28e04.c b/drivers/w1/slaves/w1_ds28e04.c
index 6cef6e2edb89..2854b8b9e93f 100644
--- a/drivers/w1/slaves/w1_ds28e04.c
+++ b/drivers/w1/slaves/w1_ds28e04.c
@@ -53,7 +53,7 @@ struct w1_f1C_data {
u32 validcrc;
};
-/**
+/*
* Check the file size bounds and adjusts count as needed.
* This would not be needed if the file size didn't reset to 0 after a write.
*/
@@ -146,16 +146,17 @@ out_up:
}
/**
- * Writes to the scratchpad and reads it back for verification.
+ * w1_f1C_write() - Writes to the scratchpad and reads it back for verification.
+ * @sl: The slave structure
+ * @addr: Address for the write
+ * @len: length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
+ * @data: The data to write
+ *
* Then copies the scratchpad to EEPROM.
* The data must be on one page.
* The master must be locked.
*
- * @param sl The slave structure
- * @param addr Address for the write
- * @param len length must be <= (W1_PAGE_SIZE - (addr & W1_PAGE_MASK))
- * @param data The data to write
- * @return 0=Success -1=failure
+ * Return: 0=Success, -1=failure
*/
static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
{
@@ -197,8 +198,10 @@ static int w1_f1C_write(struct w1_slave *sl, int addr, int len, const u8 *data)
wrbuf[3] = es;
for (i = 0; i < sizeof(wrbuf); ++i) {
- /* issue 10ms strong pullup (or delay) on the last byte
- for writing the data from the scratchpad to EEPROM */
+ /*
+ * issue 10ms strong pullup (or delay) on the last byte
+ * for writing the data from the scratchpad to EEPROM
+ */
if (w1_strong_pullup && i == sizeof(wrbuf)-1)
w1_next_pullup(sl->master, tm);
diff --git a/drivers/w1/slaves/w1_ds28e17.c b/drivers/w1/slaves/w1_ds28e17.c
index aed10b72fc99..52261b54d842 100644
--- a/drivers/w1/slaves/w1_ds28e17.c
+++ b/drivers/w1/slaves/w1_ds28e17.c
@@ -31,12 +31,12 @@ MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17));
/* Default I2C speed to be set when a DS28E17 is detected. */
static int i2c_speed = 100;
-module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR));
+module_param_named(speed, i2c_speed, int, 0600);
MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected");
/* Default I2C stretch value to be set when a DS28E17 is detected. */
static char i2c_stretch = 1;
-module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR));
+module_param_named(stretch, i2c_stretch, byte, 0600);
MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected");
/* DS28E17 device command codes. */
@@ -59,7 +59,7 @@ MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is
/*
* Maximum number of I2C bytes to transfer within one CRC16 protected onewire
* command.
- * */
+ */
#define W1_F19_WRITE_DATA_LIMIT 255
/* Maximum number of I2C bytes to read with one onewire command. */