Merge tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - added support for MIPSr5 and P5600 cores

 - converted Loongson PCI driver into a PCI host driver using the
   generic PCI framework

 - added emulation of CPUCFG command for Loogonson64 cpus

 - removed of LASAT, PMC MSP71xx and NEC MARKEINS/EMMA

 - ioremap cleanup

 - fix for a race between two threads faulting the same page

 - various cleanups and fixes

* tag 'mips_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (143 commits)
  MIPS: ralink: drop ralink_clk_init for mt7621
  MIPS: ralink: bootrom: mark a function as __init to save some memory
  MIPS: Loongson64: Reorder CPUCFG model match arms
  MIPS: Expose Loongson CPUCFG availability via HWCAP
  MIPS: Loongson64: Guard against future cores without CPUCFG
  MIPS: Fix build warning about "PTR_STR" redefinition
  MIPS: Loongson64: Remove not used pci.c
  MIPS: Loongson64: Define PCI_IOBASE
  MIPS: CPU_LOONGSON2EF need software to maintain cache consistency
  MIPS: DTS: Fix build errors used with various configs
  MIPS: Loongson64: select NO_EXCEPT_FILL
  MIPS: Fix IRQ tracing when call handle_fpe() and handle_msa_fpe()
  MIPS: mm: add page valid judgement in function pte_modify
  mm/memory.c: Add memory read privilege on page fault handling
  mm/memory.c: Update local TLB if PTE entry exists
  MIPS: Do not flush tlb page when updating PTE entry
  MIPS: ingenic: Default to a generic board
  MIPS: ingenic: Add support for GCW Zero prototype
  MIPS: ingenic: DTS: Add memory info of GCW Zero
  MIPS: Loongson64: Switch to generic PCI driver
  ...

8 files changed, 439 insertions, 19 deletions

diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index 909f40fbcde2..d05e761d9572 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -20,7 +20,6 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 
-#include <asm/clock.h>
 #include <asm/idle.h>
 
 #include <asm/mach-loongson2ef/loongson.h>
@@ -58,29 +57,20 @@ static int loongson2_cpufreq_target(struct cpufreq_policy *policy,
 	     loongson2_clockmod_table[index].driver_data) / 8;
 
 	/* setting the cpu frequency */
-	clk_set_rate(policy->clk, freq * 1000);
+	loongson2_cpu_set_rate(freq);
 
 	return 0;
 }
 
 static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
-	struct clk *cpuclk;
 	int i;
 	unsigned long rate;
 	int ret;
 
-	cpuclk = clk_get(NULL, "cpu_clk");
-	if (IS_ERR(cpuclk)) {
-		pr_err("couldn't get CPU clk\n");
-		return PTR_ERR(cpuclk);
-	}
-
 	rate = cpu_clock_freq / 1000;
-	if (!rate) {
-		clk_put(cpuclk);
+	if (!rate)
 		return -EINVAL;
-	}
 
 	/* clock table init */
 	for (i = 2;
@@ -88,20 +78,16 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	     i++)
 		loongson2_clockmod_table[i].frequency = (rate * i) / 8;
 
-	ret = clk_set_rate(cpuclk, rate * 1000);
-	if (ret) {
-		clk_put(cpuclk);
+	ret = loongson2_cpu_set_rate(rate);
+	if (ret)
 		return ret;
-	}
 
-	policy->clk = cpuclk;
 	cpufreq_generic_init(policy, &loongson2_clockmod_table[0], 0);
 	return 0;
 }
 
 static int loongson2_cpufreq_exit(struct cpufreq_policy *policy)
 {
-	clk_put(policy->clk);
 	return 0;
 }
 
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 91bfdb784829..ae36edb1d7db 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -258,6 +258,16 @@ config PCI_HYPERV_INTERFACE
 	  The Hyper-V PCI Interface is a helper driver allows other drivers to
 	  have a common interface with the Hyper-V PCI frontend driver.
 
+config PCI_LOONGSON
+	bool "LOONGSON PCI Controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	depends on OF
+	depends on PCI_QUIRKS
+	default MACH_LOONGSON64
+	help
+	  Say Y here if you want to enable PCI controller support on
+	  Loongson systems.
+
 source "drivers/pci/controller/dwc/Kconfig"
 source "drivers/pci/controller/mobiveil/Kconfig"
 source "drivers/pci/controller/cadence/Kconfig"
diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
index 158c59771824..fbac4b0190a0 100644
--- a/drivers/pci/controller/Makefile
+++ b/drivers/pci/controller/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
 obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
 obj-$(CONFIG_VMD) += vmd.o
 obj-$(CONFIG_PCIE_BRCMSTB) += pcie-brcmstb.o
+obj-$(CONFIG_PCI_LOONGSON) += pci-loongson.o
 # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
 obj-y				+= dwc/
 obj-y				+= mobiveil/
diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c
new file mode 100644
index 000000000000..459009c8a4a0
--- /dev/null
+++ b/drivers/pci/controller/pci-loongson.c
@@ -0,0 +1,247 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Loongson PCI Host Controller Driver
+ *
+ * Copyright (C) 2020 Jiaxun Yang <jiaxun.yang@flygoat.com>
+ */
+
+#include <linux/of_device.h>
+#include <linux/of_pci.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "../pci.h"
+
+/* Device IDs */
+#define DEV_PCIE_PORT_0	0x7a09
+#define DEV_PCIE_PORT_1	0x7a19
+#define DEV_PCIE_PORT_2	0x7a29
+
+#define DEV_LS2K_APB	0x7a02
+#define DEV_LS7A_CONF	0x7a10
+#define DEV_LS7A_LPC	0x7a0c
+
+#define FLAG_CFG0	BIT(0)
+#define FLAG_CFG1	BIT(1)
+#define FLAG_DEV_FIX	BIT(2)
+
+struct loongson_pci {
+	void __iomem *cfg0_base;
+	void __iomem *cfg1_base;
+	struct platform_device *pdev;
+	u32 flags;
+};
+
+/* Fixup wrong class code in PCIe bridges */
+static void bridge_class_quirk(struct pci_dev *dev)
+{
+	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_0, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_1, bridge_class_quirk);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LOONGSON,
+			DEV_PCIE_PORT_2, bridge_class_quirk);
+
+static void system_bus_quirk(struct pci_dev *pdev)
+{
+	/*
+	 * The address space consumed by these devices is outside the
+	 * resources of the host bridge.
+	 */
+	pdev->mmio_always_on = 1;
+	pdev->non_compliant_bars = 1;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS2K_APB, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS7A_CONF, system_bus_quirk);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON,
+			DEV_LS7A_LPC, system_bus_quirk);
+
+static void loongson_mrrs_quirk(struct pci_dev *dev)
+{
+	struct pci_bus *bus = dev->bus;
+	struct pci_dev *bridge;
+	static const struct pci_device_id bridge_devids[] = {
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) },
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) },
+		{ PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) },
+		{ 0, },
+	};
+
+	/* look for the matching bridge */
+	while (!pci_is_root_bus(bus)) {
+		bridge = bus->self;
+		bus = bus->parent;
+		/*
+		 * Some Loongson PCIe ports have a h/w limitation of
+		 * 256 bytes maximum read request size. They can't handle
+		 * anything larger than this. So force this limit on
+		 * any devices attached under these ports.
+		 */
+		if (pci_match_id(bridge_devids, bridge)) {
+			if (pcie_get_readrq(dev) > 256) {
+				pci_info(dev, "limiting MRRS to 256\n");
+				pcie_set_readrq(dev, 256);
+			}
+			break;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk);
+
+static void __iomem *cfg1_map(struct loongson_pci *priv, int bus,
+				unsigned int devfn, int where)
+{
+	unsigned long addroff = 0x0;
+
+	if (bus != 0)
+		addroff |= BIT(28); /* Type 1 Access */
+	addroff |= (where & 0xff) | ((where & 0xf00) << 16);
+	addroff |= (bus << 16) | (devfn << 8);
+	return priv->cfg1_base + addroff;
+}
+
+static void __iomem *cfg0_map(struct loongson_pci *priv, int bus,
+				unsigned int devfn, int where)
+{
+	unsigned long addroff = 0x0;
+
+	if (bus != 0)
+		addroff |= BIT(24); /* Type 1 Access */
+	addroff |= (bus << 16) | (devfn << 8) | where;
+	return priv->cfg0_base + addroff;
+}
+
+static void __iomem *pci_loongson_map_bus(struct pci_bus *bus, unsigned int devfn,
+			       int where)
+{
+	unsigned char busnum = bus->number;
+	struct pci_host_bridge *bridge = pci_find_host_bridge(bus);
+	struct loongson_pci *priv =  pci_host_bridge_priv(bridge);
+
+	/*
+	 * Do not read more than one device on the bus other than
+	 * the host bus. For our hardware the root bus is always bus 0.
+	 */
+	if (priv->flags & FLAG_DEV_FIX && busnum != 0 &&
+		PCI_SLOT(devfn) > 0)
+		return NULL;
+
+	/* CFG0 can only access standard space */
+	if (where < PCI_CFG_SPACE_SIZE && priv->cfg0_base)
+		return cfg0_map(priv, busnum, devfn, where);
+
+	/* CFG1 can access extended space */
+	if (where < PCI_CFG_SPACE_EXP_SIZE && priv->cfg1_base)
+		return cfg1_map(priv, busnum, devfn, where);
+
+	return NULL;
+}
+
+static int loongson_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+	u8 val;
+
+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
+	if (irq > 0)
+		return irq;
+
+	/* Care i8259 legacy systems */
+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &val);
+	/* i8259 only have 15 IRQs */
+	if (val > 15)
+		return 0;
+
+	return val;
+}
+
+/* H/w only accept 32-bit PCI operations */
+static struct pci_ops loongson_pci_ops = {
+	.map_bus = pci_loongson_map_bus,
+	.read	= pci_generic_config_read32,
+	.write	= pci_generic_config_write32,
+};
+
+static const struct of_device_id loongson_pci_of_match[] = {
+	{ .compatible = "loongson,ls2k-pci",
+		.data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+	{ .compatible = "loongson,ls7a-pci",
+		.data = (void *)(FLAG_CFG0 | FLAG_CFG1 | FLAG_DEV_FIX), },
+	{ .compatible = "loongson,rs780e-pci",
+		.data = (void *)(FLAG_CFG0), },
+	{}
+};
+
+static int loongson_pci_probe(struct platform_device *pdev)
+{
+	struct loongson_pci *priv;
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct pci_host_bridge *bridge;
+	struct resource *regs;
+	int err;
+
+	if (!node)
+		return -ENODEV;
+
+	bridge = devm_pci_alloc_host_bridge(dev, sizeof(*priv));
+	if (!bridge)
+		return -ENODEV;
+
+	priv = pci_host_bridge_priv(bridge);
+	priv->pdev = pdev;
+	priv->flags = (unsigned long)of_device_get_match_data(dev);
+
+	regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!regs) {
+		dev_err(dev, "missing mem resources for cfg0\n");
+		return -EINVAL;
+	}
+
+	priv->cfg0_base = devm_pci_remap_cfg_resource(dev, regs);
+	if (IS_ERR(priv->cfg0_base))
+		return PTR_ERR(priv->cfg0_base);
+
+	/* CFG1 is optional */
+	if (priv->flags & FLAG_CFG1) {
+		regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+		if (!regs)
+			dev_info(dev, "missing mem resource for cfg1\n");
+		else {
+			priv->cfg1_base = devm_pci_remap_cfg_resource(dev, regs);
+			if (IS_ERR(priv->cfg1_base))
+				priv->cfg1_base = NULL;
+		}
+	}
+
+	err = pci_parse_request_of_pci_ranges(dev, &bridge->windows,
+						&bridge->dma_ranges, NULL);
+	if (err) {
+		dev_err(dev, "failed to get bridge resources\n");
+		return err;
+	}
+
+	bridge->dev.parent = dev;
+	bridge->sysdata = priv;
+	bridge->ops = &loongson_pci_ops;
+	bridge->map_irq = loongson_map_irq;
+
+	err = pci_host_probe(bridge);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static struct platform_driver loongson_pci_driver = {
+	.driver = {
+		.name = "loongson-pci",
+		.of_match_table = loongson_pci_of_match,
+	},
+	.probe = loongson_pci_probe,
+};
+builtin_platform_driver(loongson_pci_driver);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 77b8a145c39b..d9c2c3301a8a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1822,7 +1822,7 @@ int pci_setup_device(struct pci_dev *dev)
 	/* Device class may be changed after fixup */
 	class = dev->class >> 8;
 
-	if (dev->non_compliant_bars) {
+	if (dev->non_compliant_bars && !dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 			pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
diff --git a/drivers/platform/mips/Kconfig b/drivers/platform/mips/Kconfig
index 5e77b0dc5fd6..8ac149173c64 100644
--- a/drivers/platform/mips/Kconfig
+++ b/drivers/platform/mips/Kconfig
@@ -24,4 +24,10 @@ config CPU_HWMON
 	help
 	  Loongson-3A/3B CPU Hwmon (temperature sensor) driver.
 
+config RS780E_ACPI
+	bool "Loongson RS780E ACPI Controller"
+	depends on MACH_LOONGSON64 || COMPILE_TEST
+	help
+	  Loongson RS780E PCH ACPI Controller driver.
+
 endif # MIPS_PLATFORM_DEVICES
diff --git a/drivers/platform/mips/Makefile b/drivers/platform/mips/Makefile
index be8146c20dc8..178149098777 100644
--- a/drivers/platform/mips/Makefile
+++ b/drivers/platform/mips/Makefile
@@ -1,2 +1,3 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_CPU_HWMON) += cpu_hwmon.o
+obj-$(CONFIG_RS780E_ACPI) += rs780e-acpi.o
diff --git a/drivers/platform/mips/rs780e-acpi.c b/drivers/platform/mips/rs780e-acpi.c
new file mode 100644
index 000000000000..e5a643b78ac9
--- /dev/null
+++ b/drivers/platform/mips/rs780e-acpi.c
@@ -0,0 +1,169 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static unsigned long acpi_iobase;
+
+#define ACPI_PM_EVT_BLK         (acpi_iobase + 0x00) /* 4 bytes */
+#define ACPI_PM_CNT_BLK         (acpi_iobase + 0x04) /* 2 bytes */
+#define ACPI_PMA_CNT_BLK        (acpi_iobase + 0x0F) /* 1 byte */
+#define ACPI_PM_TMR_BLK         (acpi_iobase + 0x18) /* 4 bytes */
+#define ACPI_GPE0_BLK           (acpi_iobase + 0x10) /* 8 bytes */
+#define ACPI_END                (acpi_iobase + 0x80)
+
+#define PM_INDEX        0xCD6
+#define PM_DATA         0xCD7
+#define PM2_INDEX       0xCD0
+#define PM2_DATA        0xCD1
+
+static void pmio_write_index(u16 index, u8 reg, u8 value)
+{
+	outb(reg, index);
+	outb(value, index + 1);
+}
+
+static u8 pmio_read_index(u16 index, u8 reg)
+{
+	outb(reg, index);
+	return inb(index + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm_iowrite);
+
+u8 pm_ioread(u8 reg)
+{
+	return pmio_read_index(PM_INDEX, reg);
+}
+EXPORT_SYMBOL(pm_ioread);
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+	pmio_write_index(PM2_INDEX, reg, value);
+}
+EXPORT_SYMBOL(pm2_iowrite);
+
+u8 pm2_ioread(u8 reg)
+{
+	return pmio_read_index(PM2_INDEX, reg);
+}
+EXPORT_SYMBOL(pm2_ioread);
+
+static void acpi_hw_clear_status(void)
+{
+	u16 value;
+
+	/* PMStatus: Clear WakeStatus/PwrBtnStatus */
+	value = inw(ACPI_PM_EVT_BLK);
+	value |= (1 << 8 | 1 << 15);
+	outw(value, ACPI_PM_EVT_BLK);
+
+	/* GPEStatus: Clear all generated events */
+	outl(inl(ACPI_GPE0_BLK), ACPI_GPE0_BLK);
+}
+
+void acpi_registers_setup(void)
+{
+	u32 value;
+
+	/* PM Status Base */
+	pm_iowrite(0x20, ACPI_PM_EVT_BLK & 0xff);
+	pm_iowrite(0x21, ACPI_PM_EVT_BLK >> 8);
+
+	/* PM Control Base */
+	pm_iowrite(0x22, ACPI_PM_CNT_BLK & 0xff);
+	pm_iowrite(0x23, ACPI_PM_CNT_BLK >> 8);
+
+	/* GPM Base */
+	pm_iowrite(0x28, ACPI_GPE0_BLK & 0xff);
+	pm_iowrite(0x29, ACPI_GPE0_BLK >> 8);
+
+	/* ACPI End */
+	pm_iowrite(0x2e, ACPI_END & 0xff);
+	pm_iowrite(0x2f, ACPI_END >> 8);
+
+	/* IO Decode: When AcpiDecodeEnable set, South-Bridge uses the contents
+	 * of the PM registers at index 0x20~0x2B to decode ACPI I/O address. */
+	pm_iowrite(0x0e, 1 << 3);
+
+	/* SCI_EN set */
+	outw(1, ACPI_PM_CNT_BLK);
+
+	/* Enable to generate SCI */
+	pm_iowrite(0x10, pm_ioread(0x10) | 1);
+
+	/* GPM3/GPM9 enable */
+	value = inl(ACPI_GPE0_BLK + 4);
+	outl(value | (1 << 14) | (1 << 22), ACPI_GPE0_BLK + 4);
+
+	/* Set GPM9 as input */
+	pm_iowrite(0x8d, pm_ioread(0x8d) & (~(1 << 1)));
+
+	/* Set GPM9 as non-output */
+	pm_iowrite(0x94, pm_ioread(0x94) | (1 << 3));
+
+	/* GPM3 config ACPI trigger SCIOUT */
+	pm_iowrite(0x33, pm_ioread(0x33) & (~(3 << 4)));
+
+	/* GPM9 config ACPI trigger SCIOUT */
+	pm_iowrite(0x3d, pm_ioread(0x3d) & (~(3 << 2)));
+
+	/* GPM3 config falling edge trigger */
+	pm_iowrite(0x37, pm_ioread(0x37) & (~(1 << 6)));
+
+	/* No wait for STPGNT# in ACPI Sx state */
+	pm_iowrite(0x7c, pm_ioread(0x7c) | (1 << 6));
+
+	/* Set GPM3 pull-down enable */
+	value = pm2_ioread(0xf6);
+	value |= ((1 << 7) | (1 << 3));
+	pm2_iowrite(0xf6, value);
+
+	/* Set GPM9 pull-down enable */
+	value = pm2_ioread(0xf8);
+	value |= ((1 << 5) | (1 << 1));
+	pm2_iowrite(0xf8, value);
+}
+
+static int rs780e_acpi_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_IO, 0);
+	if (!res)
+		return -ENODEV;
+
+	/* SCI interrupt need acpi space, allocate here */
+	if (!request_region(res->start, resource_size(res), "acpi")) {
+		pr_err("RS780E-ACPI: Failed to request IO Region\n");
+		return -EBUSY;
+	}
+
+	acpi_iobase = res->start;
+
+	acpi_registers_setup();
+	acpi_hw_clear_status();
+
+	return 0;
+}
+
+static const struct of_device_id rs780e_acpi_match[] = {
+	{ .compatible = "loongson,rs780e-acpi" },
+	{},
+};
+
+static struct platform_driver rs780e_acpi_driver = {
+	.probe = rs780e_acpi_probe,
+	.driver = {
+		.name = "RS780E-ACPI",
+		.of_match_table = rs780e_acpi_match,
+	},
+};
+builtin_platform_driver(rs780e_acpi_driver);