summaryrefslogtreecommitdiff
path: root/include/linux/ethtool.h
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2012-10-13 10:46:48 +0100
committerDavid Howells <dhowells@redhat.com>2012-10-13 10:46:48 +0100
commit607ca46e97a1b6594b29647d98a32d545c24bdff (patch)
tree30f4c0784bfddb57332cdc0678bd06d1e77fa185 /include/linux/ethtool.h
parent08cce05c5a91f5017f4edc9866cf026908c73f9f (diff)
UAPI: (Scripted) Disintegrate include/linux
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
Diffstat (limited to 'include/linux/ethtool.h')
-rw-r--r--include/linux/ethtool.h1076
1 files changed, 1 insertions, 1075 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index fcb4f8e60c1c..c8e3e7e39c6b 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -9,596 +9,12 @@
* scott.feldman@intel.com)
* Portions Copyright (C) Sun Microsystems 2008
*/
-
#ifndef _LINUX_ETHTOOL_H
#define _LINUX_ETHTOOL_H
-#ifdef __KERNEL__
#include <linux/compat.h>
-#endif
-#include <linux/types.h>
-#include <linux/if_ether.h>
-
-/* This should work for both 32 and 64 bit userland. */
-struct ethtool_cmd {
- __u32 cmd;
- __u32 supported; /* Features this interface supports */
- __u32 advertising; /* Features this interface advertises */
- __u16 speed; /* The forced speed (lower bits) in
- * Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 duplex; /* Duplex, half or full */
- __u8 port; /* Which connector port */
- __u8 phy_address; /* MDIO PHY address (PRTAD for clause 45).
- * May be read-only or read-write
- * depending on the driver.
- */
- __u8 transceiver; /* Which transceiver to use */
- __u8 autoneg; /* Enable or disable autonegotiation */
- __u8 mdio_support; /* MDIO protocols supported. Read-only.
- * Not set by all drivers.
- */
- __u32 maxtxpkt; /* Tx pkts before generating tx int */
- __u32 maxrxpkt; /* Rx pkts before generating rx int */
- __u16 speed_hi; /* The forced speed (upper
- * bits) in Mbps. Please use
- * ethtool_cmd_speed()/_set() to
- * access it */
- __u8 eth_tp_mdix; /* twisted pair MDI-X status */
- __u8 eth_tp_mdix_ctrl; /* twisted pair MDI-X control, when set,
- * link should be renegotiated if necessary
- */
- __u32 lp_advertising; /* Features the link partner advertises */
- __u32 reserved[2];
-};
-
-static inline void ethtool_cmd_speed_set(struct ethtool_cmd *ep,
- __u32 speed)
-{
-
- ep->speed = (__u16)speed;
- ep->speed_hi = (__u16)(speed >> 16);
-}
-
-static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
-{
- return (ep->speed_hi << 16) | ep->speed;
-}
-
-/* Device supports clause 22 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h>. This should not be
- * set if there are known to be no such peripherals present or if
- * the driver only emulates clause 22 registers for compatibility.
- */
-#define ETH_MDIO_SUPPORTS_C22 1
-
-/* Device supports clause 45 register access to PHY or peripherals
- * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
- * This should not be set if there are known to be no such peripherals
- * present.
- */
-#define ETH_MDIO_SUPPORTS_C45 2
-
-#define ETHTOOL_FWVERS_LEN 32
-#define ETHTOOL_BUSINFO_LEN 32
-/* these strings are set to whatever the driver author decides... */
-struct ethtool_drvinfo {
- __u32 cmd;
- char driver[32]; /* driver short name, "tulip", "eepro100" */
- char version[32]; /* driver version string */
- char fw_version[ETHTOOL_FWVERS_LEN]; /* firmware version string */
- char bus_info[ETHTOOL_BUSINFO_LEN]; /* Bus info for this IF. */
- /* For PCI devices, use pci_name(pci_dev). */
- char reserved1[32];
- char reserved2[12];
- /*
- * Some struct members below are filled in
- * using ops->get_sset_count(). Obtaining
- * this info from ethtool_drvinfo is now
- * deprecated; Use ETHTOOL_GSSET_INFO
- * instead.
- */
- __u32 n_priv_flags; /* number of flags valid in ETHTOOL_GPFLAGS */
- __u32 n_stats; /* number of u64's from ETHTOOL_GSTATS */
- __u32 testinfo_len;
- __u32 eedump_len; /* Size of data from ETHTOOL_GEEPROM (bytes) */
- __u32 regdump_len; /* Size of data from ETHTOOL_GREGS (bytes) */
-};
-
-#define SOPASS_MAX 6
-/* wake-on-lan settings */
-struct ethtool_wolinfo {
- __u32 cmd;
- __u32 supported;
- __u32 wolopts;
- __u8 sopass[SOPASS_MAX]; /* SecureOn(tm) password */
-};
-
-/* for passing single values */
-struct ethtool_value {
- __u32 cmd;
- __u32 data;
-};
-
-/* for passing big chunks of data */
-struct ethtool_regs {
- __u32 cmd;
- __u32 version; /* driver-specific, indicates different chips/revs */
- __u32 len; /* bytes */
- __u8 data[0];
-};
-
-/* for passing EEPROM chunks */
-struct ethtool_eeprom {
- __u32 cmd;
- __u32 magic;
- __u32 offset; /* in bytes */
- __u32 len; /* in bytes */
- __u8 data[0];
-};
-
-/**
- * struct ethtool_eee - Energy Efficient Ethernet information
- * @cmd: ETHTOOL_{G,S}EEE
- * @supported: Mask of %SUPPORTED_* flags for the speed/duplex combinations
- * for which there is EEE support.
- * @advertised: Mask of %ADVERTISED_* flags for the speed/duplex combinations
- * advertised as eee capable.
- * @lp_advertised: Mask of %ADVERTISED_* flags for the speed/duplex
- * combinations advertised by the link partner as eee capable.
- * @eee_active: Result of the eee auto negotiation.
- * @eee_enabled: EEE configured mode (enabled/disabled).
- * @tx_lpi_enabled: Whether the interface should assert its tx lpi, given
- * that eee was negotiated.
- * @tx_lpi_timer: Time in microseconds the interface delays prior to asserting
- * its tx lpi (after reaching 'idle' state). Effective only when eee
- * was negotiated and tx_lpi_enabled was set.
- */
-struct ethtool_eee {
- __u32 cmd;
- __u32 supported;
- __u32 advertised;
- __u32 lp_advertised;
- __u32 eee_active;
- __u32 eee_enabled;
- __u32 tx_lpi_enabled;
- __u32 tx_lpi_timer;
- __u32 reserved[2];
-};
-
-/**
- * struct ethtool_modinfo - plugin module eeprom information
- * @cmd: %ETHTOOL_GMODULEINFO
- * @type: Standard the module information conforms to %ETH_MODULE_SFF_xxxx
- * @eeprom_len: Length of the eeprom
- *
- * This structure is used to return the information to
- * properly size memory for a subsequent call to %ETHTOOL_GMODULEEEPROM.
- * The type code indicates the eeprom data format
- */
-struct ethtool_modinfo {
- __u32 cmd;
- __u32 type;
- __u32 eeprom_len;
- __u32 reserved[8];
-};
-
-/**
- * struct ethtool_coalesce - coalescing parameters for IRQs and stats updates
- * @cmd: ETHTOOL_{G,S}COALESCE
- * @rx_coalesce_usecs: How many usecs to delay an RX interrupt after
- * a packet arrives.
- * @rx_max_coalesced_frames: Maximum number of packets to receive
- * before an RX interrupt.
- * @rx_coalesce_usecs_irq: Same as @rx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @rx_max_coalesced_frames_irq: Same as @rx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @tx_coalesce_usecs: How many usecs to delay a TX interrupt after
- * a packet is sent.
- * @tx_max_coalesced_frames: Maximum number of packets to be sent
- * before a TX interrupt.
- * @tx_coalesce_usecs_irq: Same as @tx_coalesce_usecs, except that
- * this value applies while an IRQ is being serviced by the host.
- * @tx_max_coalesced_frames_irq: Same as @tx_max_coalesced_frames,
- * except that this value applies while an IRQ is being serviced
- * by the host.
- * @stats_block_coalesce_usecs: How many usecs to delay in-memory
- * statistics block updates. Some drivers do not have an
- * in-memory statistic block, and in such cases this value is
- * ignored. This value must not be zero.
- * @use_adaptive_rx_coalesce: Enable adaptive RX coalescing.
- * @use_adaptive_tx_coalesce: Enable adaptive TX coalescing.
- * @pkt_rate_low: Threshold for low packet rate (packets per second).
- * @rx_coalesce_usecs_low: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is below @pkt_rate_low.
- * @rx_max_coalesced_frames_low: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is below @pkt_rate_low.
- * @tx_coalesce_usecs_low: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is below @pkt_rate_low.
- * @tx_max_coalesced_frames_low: Maximum nuumber of packets to be sent before
- * a TX interrupt, when the packet rate is below @pkt_rate_low.
- * @pkt_rate_high: Threshold for high packet rate (packets per second).
- * @rx_coalesce_usecs_high: How many usecs to delay an RX interrupt after
- * a packet arrives, when the packet rate is above @pkt_rate_high.
- * @rx_max_coalesced_frames_high: Maximum number of packets to be received
- * before an RX interrupt, when the packet rate is above @pkt_rate_high.
- * @tx_coalesce_usecs_high: How many usecs to delay a TX interrupt after
- * a packet is sent, when the packet rate is above @pkt_rate_high.
- * @tx_max_coalesced_frames_high: Maximum number of packets to be sent before
- * a TX interrupt, when the packet rate is above @pkt_rate_high.
- * @rate_sample_interval: How often to do adaptive coalescing packet rate
- * sampling, measured in seconds. Must not be zero.
- *
- * Each pair of (usecs, max_frames) fields specifies this exit
- * condition for interrupt coalescing:
- * (usecs > 0 && time_since_first_completion >= usecs) ||
- * (max_frames > 0 && completed_frames >= max_frames)
- * It is illegal to set both usecs and max_frames to zero as this
- * would cause interrupts to never be generated. To disable
- * coalescing, set usecs = 0 and max_frames = 1.
- *
- * Some implementations ignore the value of max_frames and use the
- * condition:
- * time_since_first_completion >= usecs
- * This is deprecated. Drivers for hardware that does not support
- * counting completions should validate that max_frames == !rx_usecs.
- *
- * Adaptive RX/TX coalescing is an algorithm implemented by some
- * drivers to improve latency under low packet rates and improve
- * throughput under high packet rates. Some drivers only implement
- * one of RX or TX adaptive coalescing. Anything not implemented by
- * the driver causes these values to be silently ignored.
- *
- * When the packet rate is below @pkt_rate_high but above
- * @pkt_rate_low (both measured in packets per second) the
- * normal {rx,tx}_* coalescing parameters are used.
- */
-struct ethtool_coalesce {
- __u32 cmd;
- __u32 rx_coalesce_usecs;
- __u32 rx_max_coalesced_frames;
- __u32 rx_coalesce_usecs_irq;
- __u32 rx_max_coalesced_frames_irq;
- __u32 tx_coalesce_usecs;
- __u32 tx_max_coalesced_frames;
- __u32 tx_coalesce_usecs_irq;
- __u32 tx_max_coalesced_frames_irq;
- __u32 stats_block_coalesce_usecs;
- __u32 use_adaptive_rx_coalesce;
- __u32 use_adaptive_tx_coalesce;
- __u32 pkt_rate_low;
- __u32 rx_coalesce_usecs_low;
- __u32 rx_max_coalesced_frames_low;
- __u32 tx_coalesce_usecs_low;
- __u32 tx_max_coalesced_frames_low;
- __u32 pkt_rate_high;
- __u32 rx_coalesce_usecs_high;
- __u32 rx_max_coalesced_frames_high;
- __u32 tx_coalesce_usecs_high;
- __u32 tx_max_coalesced_frames_high;
- __u32 rate_sample_interval;
-};
-
-/* for configuring RX/TX ring parameters */
-struct ethtool_ringparam {
- __u32 cmd; /* ETHTOOL_{G,S}RINGPARAM */
-
- /* Read only attributes. These indicate the maximum number
- * of pending RX/TX ring entries the driver will allow the
- * user to set.
- */
- __u32 rx_max_pending;
- __u32 rx_mini_max_pending;
- __u32 rx_jumbo_max_pending;
- __u32 tx_max_pending;
-
- /* Values changeable by the user. The valid values are
- * in the range 1 to the "*_max_pending" counterpart above.
- */
- __u32 rx_pending;
- __u32 rx_mini_pending;
- __u32 rx_jumbo_pending;
- __u32 tx_pending;
-};
-
-/**
- * struct ethtool_channels - configuring number of network channel
- * @cmd: ETHTOOL_{G,S}CHANNELS
- * @max_rx: Read only. Maximum number of receive channel the driver support.
- * @max_tx: Read only. Maximum number of transmit channel the driver support.
- * @max_other: Read only. Maximum number of other channel the driver support.
- * @max_combined: Read only. Maximum number of combined channel the driver
- * support. Set of queues RX, TX or other.
- * @rx_count: Valid values are in the range 1 to the max_rx.
- * @tx_count: Valid values are in the range 1 to the max_tx.
- * @other_count: Valid values are in the range 1 to the max_other.
- * @combined_count: Valid values are in the range 1 to the max_combined.
- *
- * This can be used to configure RX, TX and other channels.
- */
-
-struct ethtool_channels {
- __u32 cmd;
- __u32 max_rx;
- __u32 max_tx;
- __u32 max_other;
- __u32 max_combined;
- __u32 rx_count;
- __u32 tx_count;
- __u32 other_count;
- __u32 combined_count;
-};
-
-/* for configuring link flow control parameters */
-struct ethtool_pauseparam {
- __u32 cmd; /* ETHTOOL_{G,S}PAUSEPARAM */
-
- /* If the link is being auto-negotiated (via ethtool_cmd.autoneg
- * being true) the user may set 'autoneg' here non-zero to have the
- * pause parameters be auto-negotiated too. In such a case, the
- * {rx,tx}_pause values below determine what capabilities are
- * advertised.
- *
- * If 'autoneg' is zero or the link is not being auto-negotiated,
- * then {rx,tx}_pause force the driver to use/not-use pause
- * flow control.
- */
- __u32 autoneg;
- __u32 rx_pause;
- __u32 tx_pause;
-};
-
-#define ETH_GSTRING_LEN 32
-enum ethtool_stringset {
- ETH_SS_TEST = 0,
- ETH_SS_STATS,
- ETH_SS_PRIV_FLAGS,
- ETH_SS_NTUPLE_FILTERS, /* Do not use, GRXNTUPLE is now deprecated */
- ETH_SS_FEATURES,
-};
-
-/* for passing string sets for data tagging */
-struct ethtool_gstrings {
- __u32 cmd; /* ETHTOOL_GSTRINGS */
- __u32 string_set; /* string set id e.c. ETH_SS_TEST, etc*/
- __u32 len; /* number of strings in the string set */
- __u8 data[0];
-};
-
-struct ethtool_sset_info {
- __u32 cmd; /* ETHTOOL_GSSET_INFO */
- __u32 reserved;
- __u64 sset_mask; /* input: each bit selects an sset to query */
- /* output: each bit a returned sset */
- __u32 data[0]; /* ETH_SS_xxx count, in order, based on bits
- in sset_mask. One bit implies one
- __u32, two bits implies two
- __u32's, etc. */
-};
-
-/**
- * enum ethtool_test_flags - flags definition of ethtool_test
- * @ETH_TEST_FL_OFFLINE: if set perform online and offline tests, otherwise
- * only online tests.
- * @ETH_TEST_FL_FAILED: Driver set this flag if test fails.
- * @ETH_TEST_FL_EXTERNAL_LB: Application request to perform external loopback
- * test.
- * @ETH_TEST_FL_EXTERNAL_LB_DONE: Driver performed the external loopback test
- */
-
-enum ethtool_test_flags {
- ETH_TEST_FL_OFFLINE = (1 << 0),
- ETH_TEST_FL_FAILED = (1 << 1),
- ETH_TEST_FL_EXTERNAL_LB = (1 << 2),
- ETH_TEST_FL_EXTERNAL_LB_DONE = (1 << 3),
-};
-
-/* for requesting NIC test and getting results*/
-struct ethtool_test {
- __u32 cmd; /* ETHTOOL_TEST */
- __u32 flags; /* ETH_TEST_FL_xxx */
- __u32 reserved;
- __u32 len; /* result length, in number of u64 elements */
- __u64 data[0];
-};
-
-/* for dumping NIC-specific statistics */
-struct ethtool_stats {
- __u32 cmd; /* ETHTOOL_GSTATS */
- __u32 n_stats; /* number of u64's being returned */
- __u64 data[0];
-};
-
-struct ethtool_perm_addr {
- __u32 cmd; /* ETHTOOL_GPERMADDR */
- __u32 size;
- __u8 data[0];
-};
-
-/* boolean flags controlling per-interface behavior characteristics.
- * When reading, the flag indicates whether or not a certain behavior
- * is enabled/present. When writing, the flag indicates whether
- * or not the driver should turn on (set) or off (clear) a behavior.
- *
- * Some behaviors may read-only (unconditionally absent or present).
- * If such is the case, return EINVAL in the set-flags operation if the
- * flag differs from the read-only value.
- */
-enum ethtool_flags {
- ETH_FLAG_TXVLAN = (1 << 7), /* TX VLAN offload enabled */
- ETH_FLAG_RXVLAN = (1 << 8), /* RX VLAN offload enabled */
- ETH_FLAG_LRO = (1 << 15), /* LRO is enabled */
- ETH_FLAG_NTUPLE = (1 << 27), /* N-tuple filters enabled */
- ETH_FLAG_RXHASH = (1 << 28),
-};
+#include <uapi/linux/ethtool.h>
-/* The following structures are for supporting RX network flow
- * classification and RX n-tuple configuration. Note, all multibyte
- * fields, e.g., ip4src, ip4dst, psrc, pdst, spi, etc. are expected to
- * be in network byte order.
- */
-
-/**
- * struct ethtool_tcpip4_spec - flow specification for TCP/IPv4 etc.
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @psrc: Source port
- * @pdst: Destination port
- * @tos: Type-of-service
- *
- * This can be used to specify a TCP/IPv4, UDP/IPv4 or SCTP/IPv4 flow.
- */
-struct ethtool_tcpip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be16 psrc;
- __be16 pdst;
- __u8 tos;
-};
-
-/**
- * struct ethtool_ah_espip4_spec - flow specification for IPsec/IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @spi: Security parameters index
- * @tos: Type-of-service
- *
- * This can be used to specify an IPsec transport or tunnel over IPv4.
- */
-struct ethtool_ah_espip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 spi;
- __u8 tos;
-};
-
-#define ETH_RX_NFC_IP4 1
-
-/**
- * struct ethtool_usrip4_spec - general flow specification for IPv4
- * @ip4src: Source host
- * @ip4dst: Destination host
- * @l4_4_bytes: First 4 bytes of transport (layer 4) header
- * @tos: Type-of-service
- * @ip_ver: Value must be %ETH_RX_NFC_IP4; mask must be 0
- * @proto: Transport protocol number; mask must be 0
- */
-struct ethtool_usrip4_spec {
- __be32 ip4src;
- __be32 ip4dst;
- __be32 l4_4_bytes;
- __u8 tos;
- __u8 ip_ver;
- __u8 proto;
-};
-
-union ethtool_flow_union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[60];
-};
-
-struct ethtool_flow_ext {
- __be16 vlan_etype;
- __be16 vlan_tci;
- __be32 data[2];
-};
-
-/**
- * struct ethtool_rx_flow_spec - classification rule for RX flows
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow fields to match (dependent on @flow_type)
- * @h_ext: Additional fields to match
- * @m_u: Masks for flow field bits to be matched
- * @m_ext: Masks for additional field bits to be matched
- * Note, all additional fields must be ignored unless @flow_type
- * includes the %FLOW_EXT flag.
- * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC
- * if packets should be discarded
- * @location: Location of rule in the table. Locations must be
- * numbered such that a flow matching multiple rules will be
- * classified according to the first (lowest numbered) rule.
- */
-struct ethtool_rx_flow_spec {
- __u32 flow_type;
- union ethtool_flow_union h_u;
- struct ethtool_flow_ext h_ext;
- union ethtool_flow_union m_u;
- struct ethtool_flow_ext m_ext;
- __u64 ring_cookie;
- __u32 location;
-};
-
-/**
- * struct ethtool_rxnfc - command to get or set RX flow classification rules
- * @cmd: Specific command number - %ETHTOOL_GRXFH, %ETHTOOL_SRXFH,
- * %ETHTOOL_GRXRINGS, %ETHTOOL_GRXCLSRLCNT, %ETHTOOL_GRXCLSRULE,
- * %ETHTOOL_GRXCLSRLALL, %ETHTOOL_SRXCLSRLDEL or %ETHTOOL_SRXCLSRLINS
- * @flow_type: Type of flow to be affected, e.g. %TCP_V4_FLOW
- * @data: Command-dependent value
- * @fs: Flow classification rule
- * @rule_cnt: Number of rules to be affected
- * @rule_locs: Array of used rule locations
- *
- * For %ETHTOOL_GRXFH and %ETHTOOL_SRXFH, @data is a bitmask indicating
- * the fields included in the flow hash, e.g. %RXH_IP_SRC. The following
- * structure fields must not be used.
- *
- * For %ETHTOOL_GRXRINGS, @data is set to the number of RX rings/queues
- * on return.
- *
- * For %ETHTOOL_GRXCLSRLCNT, @rule_cnt is set to the number of defined
- * rules on return. If @data is non-zero on return then it is the
- * size of the rule table, plus the flag %RX_CLS_LOC_SPECIAL if the
- * driver supports any special location values. If that flag is not
- * set in @data then special location values should not be used.
- *
- * For %ETHTOOL_GRXCLSRULE, @fs.@location specifies the location of an
- * existing rule on entry and @fs contains the rule on return.
- *
- * For %ETHTOOL_GRXCLSRLALL, @rule_cnt specifies the array size of the
- * user buffer for @rule_locs on entry. On return, @data is the size
- * of the rule table, @rule_cnt is the number of defined rules, and
- * @rule_locs contains the locations of the defined rules. Drivers
- * must use the second parameter to get_rxnfc() instead of @rule_locs.
- *
- * For %ETHTOOL_SRXCLSRLINS, @fs specifies the rule to add or update.
- * @fs.@location either specifies the location to use or is a special
- * location value with %RX_CLS_LOC_SPECIAL flag set. On return,
- * @fs.@location is the actual rule location.
- *
- * For %ETHTOOL_SRXCLSRLDEL, @fs.@location specifies the location of an
- * existing rule on entry.
- *
- * A driver supporting the special location values for
- * %ETHTOOL_SRXCLSRLINS may add the rule at any suitable unused
- * location, and may remove a rule at a later location (lower
- * priority) that matches exactly the same set of flows. The special
- * values are: %RX_CLS_LOC_ANY, selecting any location;
- * %RX_CLS_LOC_FIRST, selecting the first suitable location (maximum
- * priority); and %RX_CLS_LOC_LAST, selecting the last suitable
- * location (minimum priority). Additional special values may be
- * defined in future and drivers must return -%EINVAL for any
- * unrecognised value.
- */
-struct ethtool_rxnfc {
- __u32 cmd;
- __u32 flow_type;
- __u64 data;
- struct ethtool_rx_flow_spec fs;
- __u32 rule_cnt;
- __u32 rule_locs[0];
-};
-
-#ifdef __KERNEL__
#ifdef CONFIG_COMPAT
struct compat_ethtool_rx_flow_spec {
@@ -621,223 +37,6 @@ struct compat_ethtool_rxnfc {
};
#endif /* CONFIG_COMPAT */
-#endif /* __KERNEL__ */
-
-/**
- * struct ethtool_rxfh_indir - command to get or set RX flow hash indirection
- * @cmd: Specific command number - %ETHTOOL_GRXFHINDIR or %ETHTOOL_SRXFHINDIR
- * @size: On entry, the array size of the user buffer, which may be zero.
- * On return from %ETHTOOL_GRXFHINDIR, the array size of the hardware
- * indirection table.
- * @ring_index: RX ring/queue index for each hash value
- *
- * For %ETHTOOL_GRXFHINDIR, a @size of zero means that only the size
- * should be returned. For %ETHTOOL_SRXFHINDIR, a @size of zero means
- * the table should be reset to default values. This last feature
- * is not supported by the original implementations.
- */
-struct ethtool_rxfh_indir {
- __u32 cmd;
- __u32 size;
- __u32 ring_index[0];
-};
-
-/**
- * struct ethtool_rx_ntuple_flow_spec - specification for RX flow filter
- * @flow_type: Type of match to perform, e.g. %TCP_V4_FLOW
- * @h_u: Flow field values to match (dependent on @flow_type)
- * @m_u: Masks for flow field value bits to be ignored
- * @vlan_tag: VLAN tag to match
- * @vlan_tag_mask: Mask for VLAN tag bits to be ignored
- * @data: Driver-dependent data to match
- * @data_mask: Mask for driver-dependent data bits to be ignored
- * @action: RX ring/queue index to deliver to (non-negative) or other action
- * (negative, e.g. %ETHTOOL_RXNTUPLE_ACTION_DROP)
- *
- * For flow types %TCP_V4_FLOW, %UDP_V4_FLOW and %SCTP_V4_FLOW, where
- * a field value and mask are both zero this is treated as if all mask
- * bits are set i.e. the field is ignored.
- */
-struct ethtool_rx_ntuple_flow_spec {
- __u32 flow_type;
- union {
- struct ethtool_tcpip4_spec tcp_ip4_spec;
- struct ethtool_tcpip4_spec udp_ip4_spec;
- struct ethtool_tcpip4_spec sctp_ip4_spec;
- struct ethtool_ah_espip4_spec ah_ip4_spec;
- struct ethtool_ah_espip4_spec esp_ip4_spec;
- struct ethtool_usrip4_spec usr_ip4_spec;
- struct ethhdr ether_spec;
- __u8 hdata[72];
- } h_u, m_u;
-
- __u16 vlan_tag;
- __u16 vlan_tag_mask;
- __u64 data;
- __u64 data_mask;
-
- __s32 action;
-#define ETHTOOL_RXNTUPLE_ACTION_DROP (-1) /* drop packet */
-#define ETHTOOL_RXNTUPLE_ACTION_CLEAR (-2) /* clear filter */
-};
-
-/**
- * struct ethtool_rx_ntuple - command to set or clear RX flow filter
- * @cmd: Command number - %ETHTOOL_SRXNTUPLE
- * @fs: Flow filter specification
- */
-struct ethtool_rx_ntuple {
- __u32 cmd;
- struct ethtool_rx_ntuple_flow_spec fs;
-};
-
-#define ETHTOOL_FLASH_MAX_FILENAME 128
-enum ethtool_flash_op_type {
- ETHTOOL_FLASH_ALL_REGIONS = 0,
-};
-
-/* for passing firmware flashing related parameters */
-struct ethtool_flash {
- __u32 cmd;
- __u32 region;
- char data[ETHTOOL_FLASH_MAX_FILENAME];
-};
-
-/**
- * struct ethtool_dump - used for retrieving, setting device dump
- * @cmd: Command number - %ETHTOOL_GET_DUMP_FLAG, %ETHTOOL_GET_DUMP_DATA, or
- * %ETHTOOL_SET_DUMP
- * @version: FW version of the dump, filled in by driver
- * @flag: driver dependent flag for dump setting, filled in by driver during
- * get and filled in by ethtool for set operation.
- * flag must be initialized by macro ETH_FW_DUMP_DISABLE value when
- * firmware dump is disabled.
- * @len: length of dump data, used as the length of the user buffer on entry to
- * %ETHTOOL_GET_DUMP_DATA and this is returned as dump length by driver
- * for %ETHTOOL_GET_DUMP_FLAG command
- * @data: data collected for get dump data operation
- */
-
-#define ETH_FW_DUMP_DISABLE 0
-
-struct ethtool_dump {
- __u32 cmd;
- __u32 version;
- __u32 flag;
- __u32 len;
- __u8 data[0];
-};
-
-/* for returning and changing feature sets */
-
-/**
- * struct ethtool_get_features_block - block with state of 32 features
- * @available: mask of changeable features
- * @requested: mask of features requested to be enabled if possible
- * @active: mask of currently enabled features
- * @never_changed: mask of features not changeable for any device
- */
-struct ethtool_get_features_block {
- __u32 available;
- __u32 requested;
- __u32 active;
- __u32 never_changed;
-};
-
-/**
- * struct ethtool_gfeatures - command to get state of device's features
- * @cmd: command number = %ETHTOOL_GFEATURES
- * @size: in: number of elements in the features[] array;
- * out: number of elements in features[] needed to hold all features
- * @features: state of features
- */
-struct ethtool_gfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_get_features_block features[0];
-};
-
-/**
- * struct ethtool_set_features_block - block with request for 32 features
- * @valid: mask of features to be changed
- * @requested: values of features to be changed
- */
-struct ethtool_set_features_block {
- __u32 valid;
- __u32 requested;
-};
-
-/**
- * struct ethtool_sfeatures - command to request change in device's features
- * @cmd: command number = %ETHTOOL_SFEATURES
- * @size: array size of the features[] array
- * @features: feature change masks
- */
-struct ethtool_sfeatures {
- __u32 cmd;
- __u32 size;
- struct ethtool_set_features_block features[0];
-};
-
-/**
- * struct ethtool_ts_info - holds a device's timestamping and PHC association
- * @cmd: command number = %ETHTOOL_GET_TS_INFO
- * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
- * @phc_index: device index of the associated PHC, or -1 if there is none
- * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
- * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
- *
- * The bits in the 'tx_types' and 'rx_filters' fields correspond to
- * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
- * respectively. For example, if the device supports HWTSTAMP_TX_ON,
- * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
- */
-struct ethtool_ts_info {
- __u32 cmd;
- __u32 so_timestamping;
- __s32 phc_index;
- __u32 tx_types;
- __u32 tx_reserved[3];
- __u32 rx_filters;
- __u32 rx_reserved[3];
-};
-
-/*
- * %ETHTOOL_SFEATURES changes features present in features[].valid to the
- * values of corresponding bits in features[].requested. Bits in .requested
- * not set in .valid or not changeable are ignored.
- *
- * Returns %EINVAL when .valid contains undefined or never-changeable bits
- * or size is not equal to required number of features words (32-bit blocks).
- * Returns >= 0 if request was completed; bits set in the value mean:
- * %ETHTOOL_F_UNSUPPORTED - there were bits set in .valid that are not
- * changeable (not present in %ETHTOOL_GFEATURES' features[].available)
- * those bits were ignored.
- * %ETHTOOL_F_WISH - some or all changes requested were recorded but the
- * resulting state of bits masked by .valid is not equal to .requested.
- * Probably there are other device-specific constraints on some features
- * in the set. When %ETHTOOL_F_UNSUPPORTED is set, .valid is considered
- * here as though ignored bits were cleared.
- * %ETHTOOL_F_COMPAT - some or all changes requested were made by calling
- * compatibility functions. Requested offload state cannot be properly
- * managed by kernel.
- *
- * Meaning of bits in the masks are obtained by %ETHTOOL_GSSET_INFO (number of
- * bits in the arrays - always multiple of 32) and %ETHTOOL_GSTRINGS commands
- * for ETH_SS_FEATURES string set. First entry in the table corresponds to least
- * significant bit in features[0] fields. Empty strings mark undefined features.
- */
-enum ethtool_sfeatures_retval_bits {
- ETHTOOL_F_UNSUPPORTED__BIT,
- ETHTOOL_F_WISH__BIT,
- ETHTOOL_F_COMPAT__BIT,
-};
-
-#define ETHTOOL_F_UNSUPPORTED (1 << ETHTOOL_F_UNSUPPORTED__BIT)
-#define ETHTOOL_F_WISH (1 << ETHTOOL_F_WISH__BIT)
-#define ETHTOOL_F_COMPAT (1 << ETHTOOL_F_COMPAT__BIT)
-
-#ifdef __KERNEL__
#include <linux/rculist.h>
@@ -1049,277 +248,4 @@ struct ethtool_ops {
};
-#endif /* __KERNEL__ */
-
-/* CMDs currently supported */
-#define ETHTOOL_GSET 0x00000001 /* Get settings. */
-#define ETHTOOL_SSET 0x00000002 /* Set settings. */
-#define ETHTOOL_GDRVINFO 0x00000003 /* Get driver info. */
-#define ETHTOOL_GREGS 0x00000004 /* Get NIC registers. */
-#define ETHTOOL_GWOL 0x00000005 /* Get wake-on-lan options. */
-#define ETHTOOL_SWOL 0x00000006 /* Set wake-on-lan options. */
-#define ETHTOOL_GMSGLVL 0x00000007 /* Get driver message level */
-#define ETHTOOL_SMSGLVL 0x00000008 /* Set driver msg level. */
-#define ETHTOOL_NWAY_RST 0x00000009 /* Restart autonegotiation. */
-/* Get link status for host, i.e. whether the interface *and* the
- * physical port (if there is one) are up (ethtool_value). */
-#define ETHTOOL_GLINK 0x0000000a
-#define ETHTOOL_GEEPROM 0x0000000b /* Get EEPROM data */
-#define ETHTOOL_SEEPROM 0x0000000c /* Set EEPROM data. */
-#define ETHTOOL_GCOALESCE 0x0000000e /* Get coalesce config */
-#define ETHTOOL_SCOALESCE 0x0000000f /* Set coalesce config. */
-#define ETHTOOL_GRINGPARAM 0x00000010 /* Get ring parameters */
-#define ETHTOOL_SRINGPARAM 0x00000011 /* Set ring parameters. */
-#define ETHTOOL_GPAUSEPARAM 0x00000012 /* Get pause parameters */
-#define ETHTOOL_SPAUSEPARAM 0x00000013 /* Set pause parameters. */
-#define ETHTOOL_GRXCSUM 0x00000014 /* Get RX hw csum enable (ethtool_value) */
-#define ETHTOOL_SRXCSUM 0x00000015 /* Set RX hw csum enable (ethtool_value) */
-#define ETHTOOL_GTXCSUM 0x00000016 /* Get TX hw csum enable (ethtool_value) */
-#define ETHTOOL_STXCSUM 0x00000017 /* Set TX hw csum enable (ethtool_value) */
-#define ETHTOOL_GSG 0x00000018 /* Get scatter-gather enable
- * (ethtool_value) */
-#define ETHTOOL_SSG 0x00000019 /* Set scatter-gather enable
- * (ethtool_value). */
-#define ETHTOOL_TEST 0x0000001a /* execute NIC self-test. */
-#define ETHTOOL_GSTRINGS 0x0000001b /* get specified string set */
-#define ETHTOOL_PHYS_ID 0x0000001c /* identify the NIC */
-#define ETHTOOL_GSTATS 0x0000001d /* get NIC-specific statistics */
-#define ETHTOOL_GTSO 0x0000001e /* Get TSO enable (ethtool_value) */
-#define ETHTOOL_STSO 0x0000001f /* Set TSO enable (ethtool_value) */
-#define ETHTOOL_GPERMADDR 0x00000020 /* Get permanent hardware address */
-#define ETHTOOL_GUFO 0x00000021 /* Get UFO enable (ethtool_value) */
-#define ETHTOOL_SUFO 0x00000022 /* Set UFO enable (ethtool_value) */
-#define ETHTOOL_GGSO 0x00000023 /* Get GSO enable (ethtool_value) */
-#define ETHTOOL_SGSO 0x00000024 /* Set GSO enable (ethtool_value) */
-#define ETHTOOL_GFLAGS 0x00000025 /* Get flags bitmap(ethtool_value) */
-#define ETHTOOL_SFLAGS 0x00000026 /* Set flags bitmap(ethtool_value) */
-#define ETHTOOL_GPFLAGS 0x00000027 /* Get driver-private flags bitmap */
-#define ETHTOOL_SPFLAGS 0x00000028 /* Set driver-private flags bitmap */
-
-#define ETHTOOL_GRXFH 0x00000029 /* Get RX flow hash configuration */
-#define ETHTOOL_SRXFH 0x0000002a /* Set RX flow hash configuration */
-#define ETHTOOL_GGRO 0x0000002b /* Get GRO enable (ethtool_value) */
-#define ETHTOOL_SGRO 0x0000002c /* Set GRO enable (ethtool_value) */
-#define ETHTOOL_GRXRINGS 0x0000002d /* Get RX rings available for LB */
-#define ETHTOOL_GRXCLSRLCNT 0x0000002e /* Get RX class rule count */
-#define ETHTOOL_GRXCLSRULE 0x0000002f /* Get RX classification rule */
-#define ETHTOOL_GRXCLSRLALL 0x00000030 /* Get all RX classification rule */
-#define ETHTOOL_SRXCLSRLDEL 0x00000031 /* Delete RX classification rule */
-#define ETHTOOL_SRXCLSRLINS 0x00000032 /* Insert RX classification rule */
-#define ETHTOOL_FLASHDEV 0x00000033 /* Flash firmware to device */
-#define ETHTOOL_RESET 0x00000034 /* Reset hardware */
-#define ETHTOOL_SRXNTUPLE 0x00000035 /* Add an n-tuple filter to device */
-#define ETHTOOL_GRXNTUPLE 0x00000036 /* deprecated */
-#define ETHTOOL_GSSET_INFO 0x00000037 /* Get string set info */
-#define ETHTOOL_GRXFHINDIR 0x00000038 /* Get RX flow hash indir'n table */
-#define ETHTOOL_SRXFHINDIR 0x00000039 /* Set RX flow hash indir'n table */
-
-#define ETHTOOL_GFEATURES 0x0000003a /* Get device offload settings */
-#define ETHTOOL_SFEATURES 0x0000003b /* Change device offload settings */
-#define ETHTOOL_GCHANNELS 0x0000003c /* Get no of channels */
-#define ETHTOOL_SCHANNELS 0x0000003d /* Set no of channels */
-#define ETHTOOL_SET_DUMP 0x0000003e /* Set dump settings */
-#define ETHTOOL_GET_DUMP_FLAG 0x0000003f /* Get dump settings */
-#define ETHTOOL_GET_DUMP_DATA 0x00000040 /* Get dump data */
-#define ETHTOOL_GET_TS_INFO 0x00000041 /* Get time stamping and PHC info */
-#define ETHTOOL_GMODULEINFO 0x00000042 /* Get plug-in module information */
-#define ETHTOOL_GMODULEEEPROM 0x00000043 /* Get plug-in module eeprom */
-#define ETHTOOL_GEEE 0x00000044 /* Get EEE settings */
-#define ETHTOOL_SEEE 0x00000045 /* Set EEE settings */
-
-/* compatibility with older code */
-#define SPARC_ETH_GSET ETHTOOL_GSET
-#define SPARC_ETH_SSET ETHTOOL_SSET
-
-/* Indicates what features are supported by the interface. */
-#define SUPPORTED_10baseT_Half (1 << 0)
-#define SUPPORTED_10baseT_Full (1 << 1)
-#define SUPPORTED_100baseT_Half (1 << 2)
-#define SUPPORTED_100baseT_Full (1 << 3)
-#define SUPPORTED_1000baseT_Half (1 << 4)
-#define SUPPORTED_1000baseT_Full (1 << 5)
-#define SUPPORTED_Autoneg (1 << 6)
-#define SUPPORTED_TP (1 << 7)
-#define SUPPORTED_AUI (1 << 8)
-#define SUPPORTED_MII (1 << 9)
-#define SUPPORTED_FIBRE (1 << 10)
-#define SUPPORTED_BNC (1 << 11)
-#define SUPPORTED_10000baseT_Full (1 << 12)
-#define SUPPORTED_Pause (1 << 13)
-#define SUPPORTED_Asym_Pause (1 << 14)
-#define SUPPORTED_2500baseX_Full (1 << 15)
-#define SUPPORTED_Backplane (1 << 16)
-#define SUPPORTED_1000baseKX_Full (1 << 17)
-#define SUPPORTED_10000baseKX4_Full (1 << 18)
-#define SUPPORTED_10000baseKR_Full (1 << 19)
-#define SUPPORTED_10000baseR_FEC (1 << 20)
-#define SUPPORTED_20000baseMLD2_Full (1 << 21)
-#define SUPPORTED_20000baseKR2_Full (1 << 22)
-#define SUPPORTED_40000baseKR4_Full (1 << 23)
-#define SUPPORTED_40000baseCR4_Full (1 << 24)
-#define SUPPORTED_40000baseSR4_Full (1 << 25)
-#define SUPPORTED_40000baseLR4_Full (1 << 26)
-
-/* Indicates what features are advertised by the interface. */
-#define ADVERTISED_10baseT_Half (1 << 0)
-#define ADVERTISED_10baseT_Full (1 << 1)
-#define ADVERTISED_100baseT_Half (1 << 2)
-#define ADVERTISED_100baseT_Full (1 << 3)
-#define ADVERTISED_1000baseT_Half (1 << 4)
-#define ADVERTISED_1000baseT_Full (1 << 5)
-#define ADVERTISED_Autoneg (1 << 6)
-#define ADVERTISED_TP (1 << 7)
-#define ADVERTISED_AUI (1 << 8)
-#define ADVERTISED_MII (1 << 9)
-#define ADVERTISED_FIBRE (1 << 10)
-#define ADVERTISED_BNC (1 << 11)
-#define ADVERTISED_10000baseT_Full (1 << 12)
-#define ADVERTISED_Pause (1 << 13)
-#define ADVERTISED_Asym_Pause (1 << 14)
-#define ADVERTISED_2500baseX_Full (1 << 15)
-#define ADVERTISED_Backplane (1 << 16)
-#define ADVERTISED_1000baseKX_Full (1 << 17)
-#define ADVERTISED_10000baseKX4_Full (1 << 18)
-#define ADVERTISED_10000baseKR_Full (1 << 19)
-#define ADVERTISED_10000baseR_FEC (1 << 20)
-#define ADVERTISED_20000baseMLD2_Full (1 << 21)
-#define ADVERTISED_20000baseKR2_Full (1 << 22)
-#define ADVERTISED_40000baseKR4_Full (1 << 23)
-#define ADVERTISED_40000baseCR4_Full (1 << 24)
-#define ADVERTISED_40000baseSR4_Full (1 << 25)
-#define ADVERTISED_40000baseLR4_Full (1 << 26)
-
-/* The following are all involved in forcing a particular link
- * mode for the device for setting things. When getting the
- * devices settings, these indicate the current mode and whether
- * it was forced up into this mode or autonegotiated.
- */
-
-/* The forced speed, 10Mb, 100Mb, gigabit, 2.5Gb, 10GbE. */
-#define SPEED_10 10
-#define SPEED_100 100
-#define SPEED_1000 1000
-#define SPEED_2500 2500
-#define SPEED_10000 10000
-#define SPEED_UNKNOWN -1
-
-/* Duplex, half or full. */
-#define DUPLEX_HALF 0x00
-#define DUPLEX_FULL 0x01
-#define DUPLEX_UNKNOWN 0xff
-
-/* Which connector port. */
-#define PORT_TP 0x00
-#define PORT_AUI 0x01
-#define PORT_MII 0x02
-#define PORT_FIBRE 0x03
-#define PORT_BNC 0x04
-#define PORT_DA 0x05
-#define PORT_NONE 0xef
-#define PORT_OTHER 0xff
-
-/* Which transceiver to use. */
-#define XCVR_INTERNAL 0x00
-#define XCVR_EXTERNAL 0x01
-#define XCVR_DUMMY1 0x02
-#define XCVR_DUMMY2 0x03
-#define XCVR_DUMMY3 0x04
-
-/* Enable or disable autonegotiation. If this is set to enable,
- * the forced link modes above are completely ignored.
- */
-#define AUTONEG_DISABLE 0x00
-#define AUTONEG_ENABLE 0x01
-
-/* MDI or MDI-X status/control - if MDI/MDI_X/AUTO is set then
- * the driver is required to renegotiate link
- */
-#define ETH_TP_MDI_INVALID 0x00 /* status: unknown; control: unsupported */
-#define ETH_TP_MDI 0x01 /* status: MDI; control: force MDI */
-#define ETH_TP_MDI_X 0x02 /* status: MDI-X; control: force MDI-X */
-#define ETH_TP_MDI_AUTO 0x03 /* control: auto-select */
-
-/* Wake-On-Lan options. */
-#define WAKE_PHY (1 << 0)
-#define WAKE_UCAST (1 << 1)
-#define WAKE_MCAST (1 << 2)
-#define WAKE_BCAST (1 << 3)
-#define WAKE_ARP (1 << 4)
-#define WAKE_MAGIC (1 << 5)
-#define WAKE_MAGICSECURE (1 << 6) /* only meaningful if WAKE_MAGIC */
-
-/* L2-L4 network traffic flow types */
-#define TCP_V4_FLOW 0x01 /* hash or spec (tcp_ip4_spec) */
-#define UDP_V4_FLOW 0x02 /* hash or spec (udp_ip4_spec) */
-#define SCTP_V4_FLOW 0x03 /* hash or spec (sctp_ip4_spec) */
-#define AH_ESP_V4_FLOW 0x04 /* hash only */
-#define TCP_V6_FLOW 0x05 /* hash only */
-#define UDP_V6_FLOW 0x06 /* hash only */
-#define SCTP_V6_FLOW 0x07 /* hash only */
-#define AH_ESP_V6_FLOW 0x08 /* hash only */
-#define AH_V4_FLOW 0x09 /* hash or spec (ah_ip4_spec) */
-#define ESP_V4_FLOW 0x0a /* hash or spec (esp_ip4_spec) */
-#define AH_V6_FLOW 0x0b /* hash only */
-#define ESP_V6_FLOW 0x0c /* hash only */
-#define IP_USER_FLOW 0x0d /* spec only (usr_ip4_spec) */
-#define IPV4_FLOW 0x10 /* hash only */
-#define IPV6_FLOW 0x11 /* hash only */
-#define ETHER_FLOW 0x12 /* spec only (ether_spec) */
-/* Flag to enable additional fields in struct ethtool_rx_flow_spec */
-#define FLOW_EXT 0x80000000
-
-/* L3-L4 network traffic flow hash options */
-#define RXH_L2DA (1 << 1)
-#define RXH_VLAN (1 << 2)
-#define RXH_L3_PROTO (1 << 3)
-#define RXH_IP_SRC (1 << 4)
-#define RXH_IP_DST (1 << 5)
-#define RXH_L4_B_0_1 (1 << 6) /* src port in case of TCP/UDP/SCTP */
-#define RXH_L4_B_2_3 (1 << 7) /* dst port in case of TCP/UDP/SCTP */
-#define RXH_DISCARD (1 << 31)
-
-#define RX_CLS_FLOW_DISC 0xffffffffffffffffULL
-
-/* Special RX classification rule insert location values */
-#define RX_CLS_LOC_SPECIAL 0x80000000 /* flag */
-#define RX_CLS_LOC_ANY 0xffffffff
-#define RX_CLS_LOC_FIRST 0xfffffffe
-#define RX_CLS_LOC_LAST 0xfffffffd
-
-/* EEPROM Standards for plug in modules */
-#define ETH_MODULE_SFF_8079 0x1
-#define ETH_MODULE_SFF_8079_LEN 256
-#define ETH_MODULE_SFF_8472 0x2
-#define ETH_MODULE_SFF_8472_LEN 512
-
-/* Reset flags */
-/* The reset() operation must clear the flags for the components which
- * were actually reset. On successful return, the flags indicate the
- * components which were not reset, either because they do not exist
- * in the hardware or because they cannot be reset independently. The
- * driver must never reset any components that were not requested.
- */
-enum ethtool_reset_flags {
- /* These flags represent components dedicated to the interface
- * the command is addressed to. Shift any flag left by
- * ETH_RESET_SHARED_SHIFT to reset a shared component of the
- * same type.
- */
- ETH_RESET_MGMT = 1 << 0, /* Management processor */
- ETH_RESET_IRQ = 1 << 1, /* Interrupt requester */
- ETH_RESET_DMA = 1 << 2, /* DMA engine */
- ETH_RESET_FILTER = 1 << 3, /* Filtering/flow direction */
- ETH_RESET_OFFLOAD = 1 << 4, /* Protocol offload */
- ETH_RESET_MAC = 1 << 5, /* Media access controller */
- ETH_RESET_PHY = 1 << 6, /* Transceiver/PHY */
- ETH_RESET_RAM = 1 << 7, /* RAM shared between
- * multiple components */
-
- ETH_RESET_DEDICATED = 0x0000ffff, /* All components dedicated to
- * this interface */
- ETH_RESET_ALL = 0xffffffff, /* All components used by this
- * interface, even if shared */
-};
-#define ETH_RESET_SHARED_SHIFT 16
-
#endif /* _LINUX_ETHTOOL_H */