Merge tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux

Pull pwm updates from Uwe Kleine-König:
 "This contains some cleanups to the core and some mostly minor updates
  to a bunch of drivers and device tree bindings. One thing worth
  pointing out is that it contains an immutable branch containing
  support for a new mfd chip (Analog Devices ADP5585) with several sub
  drivers.

  Thanks go to Andrew Kreimer, Clark Wang, Conor Dooley, David Lechner,
  Dmitry Rokosov, Frank Li, Geert Uytterhoeven, George Stark, Jiapeng
  Chong, Krzysztof Kozlowski, Laurent Pinchart, Liao Chen, Liu Ying, Rob
  Herring and Wolfram Sang for code contributions and reviews and to Lee
  Jones for preparing the above mentioned immutable branch"

* tag 'pwm/for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (21 commits)
  pwm: stm32: Fix a typo
  dt-bindings: pwm: amlogic: Add new bindings for meson A1 PWM
  dt-bindings: pwm: amlogic: Add optional power-domains
  pwm: Switch back to struct platform_driver::remove()
  dt-bindings: pwm: allwinner,sun4i-a10-pwm: add top-level constraints
  pwm: axi-pwmgen: use shared macro for version reg
  pwm: atmel-hlcdc: Drop trailing comma
  pwm: atmel-hlcdc: Enable module autoloading
  pwm: omap-dmtimer: Use of_property_read_bool()
  pwm: adp5585: Set OSC_EN bit to 1 when PWM state is enabled
  pwm: lp3943: Fix an incorrect type in lp3943_pwm_parse_dt()
  pwm: Simplify pwm_capture()
  pwm: lp3943: Use of_property_count_u32_elems() to get property length
  pwm: Don't export pwm_capture()
  pwm: Make info in traces about affected pwm more useful
  dt-bindings: pwm: renesas,tpu: Add r8a779h0 support
  dt-bindings: pwm: renesas,pwm-rcar: Add r8a779h0 support
  pwm: adp5585: Add Analog Devices ADP5585 support
  gpio: adp5585: Add Analog Devices ADP5585 support
  mfd: adp5585: Add Analog Devices ADP5585 core support
  ...

1 files changed, 126 insertions, 0 deletions

diff --git a/include/linux/mfd/adp5585.h b/include/linux/mfd/adp5585.h
new file mode 100644
index 000000000000..016033cd68e4
--- /dev/null
+++ b/include/linux/mfd/adp5585.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Analog Devices ADP5585 I/O expander, PWM controller and keypad controller
+ *
+ * Copyright 2022 NXP
+ * Copyright 2024 Ideas on Board Oy
+ */
+
+#ifndef __MFD_ADP5585_H_
+#define __MFD_ADP5585_H_
+
+#include <linux/bits.h>
+
+#define ADP5585_ID			0x00
+#define		ADP5585_MAN_ID_VALUE		0x20
+#define		ADP5585_MAN_ID_MASK		GENMASK(7, 4)
+#define ADP5585_INT_STATUS		0x01
+#define ADP5585_STATUS			0x02
+#define ADP5585_FIFO_1			0x03
+#define ADP5585_FIFO_2			0x04
+#define ADP5585_FIFO_3			0x05
+#define ADP5585_FIFO_4			0x06
+#define ADP5585_FIFO_5			0x07
+#define ADP5585_FIFO_6			0x08
+#define ADP5585_FIFO_7			0x09
+#define ADP5585_FIFO_8			0x0a
+#define ADP5585_FIFO_9			0x0b
+#define ADP5585_FIFO_10			0x0c
+#define ADP5585_FIFO_11			0x0d
+#define ADP5585_FIFO_12			0x0e
+#define ADP5585_FIFO_13			0x0f
+#define ADP5585_FIFO_14			0x10
+#define ADP5585_FIFO_15			0x11
+#define ADP5585_FIFO_16			0x12
+#define ADP5585_GPI_INT_STAT_A		0x13
+#define ADP5585_GPI_INT_STAT_B		0x14
+#define ADP5585_GPI_STATUS_A		0x15
+#define ADP5585_GPI_STATUS_B		0x16
+#define ADP5585_RPULL_CONFIG_A		0x17
+#define ADP5585_RPULL_CONFIG_B		0x18
+#define ADP5585_RPULL_CONFIG_C		0x19
+#define ADP5585_RPULL_CONFIG_D		0x1a
+#define		ADP5585_Rx_PULL_CFG_PU_300K	0
+#define		ADP5585_Rx_PULL_CFG_PD_300K	1
+#define		ADP5585_Rx_PULL_CFG_PU_100K	2
+#define		ADP5585_Rx_PULL_CFG_DISABLE	3
+#define		ADP5585_Rx_PULL_CFG_MASK	3
+#define ADP5585_GPI_INT_LEVEL_A		0x1b
+#define ADP5585_GPI_INT_LEVEL_B		0x1c
+#define ADP5585_GPI_EVENT_EN_A		0x1d
+#define ADP5585_GPI_EVENT_EN_B		0x1e
+#define ADP5585_GPI_INTERRUPT_EN_A	0x1f
+#define ADP5585_GPI_INTERRUPT_EN_B	0x20
+#define ADP5585_DEBOUNCE_DIS_A		0x21
+#define ADP5585_DEBOUNCE_DIS_B		0x22
+#define ADP5585_GPO_DATA_OUT_A		0x23
+#define ADP5585_GPO_DATA_OUT_B		0x24
+#define ADP5585_GPO_OUT_MODE_A		0x25
+#define ADP5585_GPO_OUT_MODE_B		0x26
+#define ADP5585_GPIO_DIRECTION_A	0x27
+#define ADP5585_GPIO_DIRECTION_B	0x28
+#define ADP5585_RESET1_EVENT_A		0x29
+#define ADP5585_RESET1_EVENT_B		0x2a
+#define ADP5585_RESET1_EVENT_C		0x2b
+#define ADP5585_RESET2_EVENT_A		0x2c
+#define ADP5585_RESET2_EVENT_B		0x2d
+#define ADP5585_RESET_CFG		0x2e
+#define ADP5585_PWM_OFFT_LOW		0x2f
+#define ADP5585_PWM_OFFT_HIGH		0x30
+#define ADP5585_PWM_ONT_LOW		0x31
+#define ADP5585_PWM_ONT_HIGH		0x32
+#define ADP5585_PWM_CFG			0x33
+#define		ADP5585_PWM_IN_AND		BIT(2)
+#define		ADP5585_PWM_MODE		BIT(1)
+#define		ADP5585_PWM_EN			BIT(0)
+#define ADP5585_LOGIC_CFG		0x34
+#define ADP5585_LOGIC_FF_CFG		0x35
+#define ADP5585_LOGIC_INT_EVENT_EN	0x36
+#define ADP5585_POLL_PTIME_CFG		0x37
+#define ADP5585_PIN_CONFIG_A		0x38
+#define ADP5585_PIN_CONFIG_B		0x39
+#define ADP5585_PIN_CONFIG_C		0x3a
+#define		ADP5585_PULL_SELECT		BIT(7)
+#define		ADP5585_C4_EXTEND_CFG_GPIO11	(0U << 6)
+#define		ADP5585_C4_EXTEND_CFG_RESET2	(1U << 6)
+#define		ADP5585_C4_EXTEND_CFG_MASK	GENMASK(6, 6)
+#define		ADP5585_R4_EXTEND_CFG_GPIO5	(0U << 5)
+#define		ADP5585_R4_EXTEND_CFG_RESET1	(1U << 5)
+#define		ADP5585_R4_EXTEND_CFG_MASK	GENMASK(5, 5)
+#define		ADP5585_R3_EXTEND_CFG_GPIO4	(0U << 2)
+#define		ADP5585_R3_EXTEND_CFG_LC	(1U << 2)
+#define		ADP5585_R3_EXTEND_CFG_PWM_OUT	(2U << 2)
+#define		ADP5585_R3_EXTEND_CFG_MASK	GENMASK(3, 2)
+#define		ADP5585_R0_EXTEND_CFG_GPIO1	(0U << 0)
+#define		ADP5585_R0_EXTEND_CFG_LY	(1U << 0)
+#define		ADP5585_R0_EXTEND_CFG_MASK	GENMASK(0, 0)
+#define ADP5585_GENERAL_CFG		0x3b
+#define		ADP5585_OSC_EN			BIT(7)
+#define		ADP5585_OSC_FREQ_50KHZ		(0U << 5)
+#define		ADP5585_OSC_FREQ_100KHZ		(1U << 5)
+#define		ADP5585_OSC_FREQ_200KHZ		(2U << 5)
+#define		ADP5585_OSC_FREQ_500KHZ		(3U << 5)
+#define		ADP5585_OSC_FREQ_MASK		GENMASK(6, 5)
+#define		ADP5585_INT_CFG			BIT(1)
+#define		ADP5585_RST_CFG			BIT(0)
+#define ADP5585_INT_EN			0x3c
+
+#define ADP5585_MAX_REG			ADP5585_INT_EN
+
+/*
+ * Bank 0 covers pins "GPIO 1/R0" to "GPIO 6/R5", numbered 0 to 5 by the
+ * driver, and bank 1 covers pins "GPIO 7/C0" to "GPIO 11/C4", numbered 6 to
+ * 10. Some variants of the ADP5585 don't support "GPIO 6/R5". As the driver
+ * uses identical GPIO numbering for all variants to avoid confusion, GPIO 5 is
+ * marked as reserved in the device tree for variants that don't support it.
+ */
+#define ADP5585_BANK(n)			((n) >= 6 ? 1 : 0)
+#define ADP5585_BIT(n)			((n) >= 6 ? BIT((n) - 6) : BIT(n))
+
+struct regmap;
+
+struct adp5585_dev {
+	struct regmap *regmap;
+};
+
+#endif